Table of Contents Interface Module Systems

Size: px
Start display at page:

Download "Table of Contents Interface Module Systems"

Transcription

1 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. Table of ontents Interface Module Systems Overview (atalog Numbering ode) 196 Interface Modules DIN onnector 198 Telco onnector 199 D-Sub onnector 200 Flat able onnector 201 DIP and ZIF Sockets 202 ard Edge Modules 203, 204 Sockets 8 Pin Octal Socket ssemblies Pin Socket ssemblies Pin Miniature Socket ssemblies Pin Miniature Socket ssemblies Pin Square Socket ssemblies 209 Individual Sockets 210 SNPTRK hannel 211 ccessories 212 Interface Module Systems 4 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK:

2 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. atalog Numbering ode 2M 64 DIN L No. of ircuits Directive 2002/95/E (RoHS) ompliant Terminal lock Series 2M = 2M Series onnector Series DIN = DIN Type R onnector TELS = Telco Socket TELP = Telco Plug DSM = D-Sub onnector F = Flat able Header DP = Dip Socket DPZ = ZIF Socket P = Single-Sided Notch ard P = Double-Sided Notch ard NOTE: Some catalog number combinations are not valid. heck appropriate catalog pages before ordering. 196 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK:

3 Note: ll part numbers are RoHS ompliant. UHNN Terminal locks Interface Modules Product Facts n atalog designs for many industry connectors: n DIN onnector n Telco onnector n D-Sub onnector n Flat able onnector (daisy chain possible) n DIP & ZIF Sockets n ard Edge Modules n Mounts on SNPTRK hannel which can be panel mounted or snapped to a DIN rail. n Terminal lock screws supplied in ready-to-wire position to save installation time. Interface Module Systems These Modules convert industry specific connectors to field wiring and are designed to supply custom solutions atalog Revised are in millimeters and inches unless otherwise specified. are shown for reference purposes only. Specifications subject to change. US: anada: Mexico: merica: South merica: Hong Kong: Japan: UK:

4 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. DIN onnector (1.05) (6.7) 2,54 (.100) 5,08 (.200) onnector: polyester. Terminals opper alloy, selective gold over nickel 71,1 (2.8) 76, Terminal lock: polyester olor lack 120 [248 ] Terminals right acid-tin over copper alloy Screws #3-48, steel zinc plated Wire Range WG Mounting 2TK2 and 2TK2D Series SNPTRK hannel M64DIN M64DIN Description DIN onnector Non RoHS ompliant Mates With Part Number atalog Number 64 Position reverse male DIN (Type R), Type Q M64DIN and filled 64 Position male DIN (Type ), Type M64DIN- and filled Description DIN onnector RoHS ompliant Mates With Part Number atalog Number 64 Position reverse male DIN (Type R), Type Q M64DINL and filled 64 Position male DIN (Type ), Type M64DIN-L and filled 198 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK:

5 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. Telco onnector 29,9 (1.18) onnector: polyester Terminals opper alloy, selective gold over nickel pplication Data 2M50TELS(P) omplies with SSI onnections 71,1 (2.8) 76,2 Terminal lock: polyester olor lack 120 [248 ] Terminals right acid-tin over copper alloy Screws #3-48, steel zinc plated Wire Range WG Mounting 2TK2 and 2TK2D Series SNPTRK hannel Non RoHS ompliant No. of Dim. Socket Plug Positions Part Number atalog Number Part Number atalog Number (109.2) M36TELS 2M36TELP (144.8) M50TELS M50TELP RoHS ompliant No. of Dim. Socket Plug Positions Part Number atalog Number Part Number atalog Number (109.2) M36TELSL 2M36TELPL (144.8) M50TELSL M50TELPL Interface Module Systems 4 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK:

6 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. D-Sub onnector 29,9 (1.18) onnector: polyester. Terminals opper alloy, selective gold over nickel Shell Material right tin plated, female screw locks installed 71,1 (2.8) 76,2 Terminal lock: polyester olor lack 120 [248 ] Terminals right acid-tin over copper alloy Screws #3-48, steel zinc plated Wire Range WG Mounting 2TK2 and 2TK2D Series SNPTRK hannel No. of Dim. Non RoHS ompliant Positions Part Number atalog Number (38.1) M09DSM (53.3) M15DSM (78.7) M25DSM (109.5) M37DSM (150.6) M50DSM Note: Female D-Sub connector available as 2MxxDSF. onsult Technical Support enter. No. of Dim. RoHS ompliant Positions Part Number atalog Number (38.1) M09DSML (53.3) M15DSML (78.7) M25DSML (109.5) M37DSML (150.6) M50DSML Note: Female D-Sub connector available as 2MxxDSFL. onsult Technical Support enter. 200 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK:

7 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. Flat able onnector 40,4 (1.59) onnector: Header rass, gold over nickel, UL94V-0 thermoplastic onnector opper alloy; gold over nickel 94V-0 thermoplastic Wire Range WG solid, 28 WG stranded Maximum urrent 1 mpere 71,1 (2.8) 76,2 Terminal lock: polyester olor lack 120 [248 ] Terminals right acid-tin over copper alloy Screws #3-48, steel zinc plated Wire Range WG Mounting 2TK2 and 2TK2D Series SNPTRK hannel No. of Dim. Non RoHS ompliant RoHS ompliant Positions Part Number atalog Number Part Number atalog Number (1.50) M10F M10FL (2.10) M14F M14FL (2.30) M16F M15FL (2.70) M20F M20FL (3.20) M26F M26FL (4.10) M34F M34FL (4.70) M40F M40FL (5.50) M50F M50FL (6.50) M60F M60FL (6.70) M64F M64FL Note: Strain relief connector supplied with all assemblies. Interface Module Systems 4 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK:

8 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. DIP and ZIF Sockets 2M16DP 2M16DPZ onnector: Terminal ontacts copper alloy, gold over nickel 76.2 Ref M16DP-1 2M16DZ-1 2M16DF 71.1 D (2.8) Terminal lock: polyester olor lack 120 [248 ] Terminals right acid-tin over copper alloy Screws #3-48, steel zinc plated Wire Range WG Mounting 2TK2 and 2TK2D Series SNPTRK hannel 1 8 No. of Socket Pin Spacing Grid Size Non RoHS ompliant Positions D Part Number atalog Number DIP Socket to Screw Terminal (26.7) 1.20 (30.5).100 x M08DP (26.7) 2.00 (50.8) (2.5 x 7.6) M16DP (26.7) 2.80 (71.1).100 x M24DP (26.7) 4.40 (111.8) (2.5 x 15.2) M40DP ZIF Socket to Screw Terminal (35.6) 2.00 (50.8) M16DPZ (35.6) 2.80 (71.1) M24DPZ (35.6) 4.40 (111.8) M40DPZ Note: ZIF denotes zero insertion force. 1 8 No. of Socket Pin Spacing Grid Size RoHS ompliant Positions D Part Number atalog Number DIP Socket to Screw Terminal (26.7) 1.20 (30.5).100 x M08DPL (26.7) 2.00 (50.8) (2.5 x 7.6) M16DPL (26.7) 2.80 (71.1).100 x M24DPL (26.7) 4.40 (111.8) (2.5 x 15.2) M40DPL ZIF Socket to Screw Terminal (35.6) 2.00 (50.8) M16DPZL (35.6) 2.80 (71.1) M24DPZL (35.6) 4.40 (111.8) M40DPZL Note: ZIF denotes zero insertion force. 202 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK:

9 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. ard Edge Modules onnector Gold over nickel contact with card guide accepts up to 4.5" [114.30] wide board " [3.96] pitch (terminal spacing) 22P, 44P Terminal lock Tri-arrier Terminals right acid tin over copper alloy Screws #4-40 steel zinc with clear chromate with captive wire clamping plate Wire Range WG Mounting Fits TK2 & TK2D Series 2M22P, 2M44P Terminal lock: polyester olor lack 120 [248 ] Terminals right acid-tin over copper alloy Screws #3-48, steel zinc plated Wire Range WG Mounting 2TK2 and 2TK2D Series SNPTRK hannel Description For single-sided notched cards. Numbered Terminals 1-22 and -Z For double-sided, notched cards. Numbered terminals -Z, 1-22 and 1-44 Similar to 22P but all terminal positions are on one side of board Similar to 44P but all terminal positions are on one side of board Description For single-sided notched cards. Numbered Terminals 1-22 and -Z For double-sided, notched cards. Numbered terminals -Z, 1-22 and 1-44 Similar to 22PL but all terminal positions are on one side of board Similar to 44PL but all terminal positions are on one side of board Non RoHS ompliant Part Number atalog Number P P M22P M44P RoHS ompliant Part Number atalog Number PL PL M22PL M44PL Interface Module Systems 4 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK:

10 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. ard Edge Modules (ontinued) 2M22P and 2M44P 22P and 44P #4-40 Screw W/Wire-lamp ,1 (2.8) 76, SnapTrack SNPTRK hannel SNPTRK Snaptrack hannel No. of Track Non RoHS ompliant Positions Size Ref. P ard Width Part Number atalog Number 22 TK(2D) 80.3 (3.16) 90.4 (3.56) (5.00) (4.5) P 2TK(2D) 69.9 (2.75) 90.4 (3.56) (5.00) (4.5) M22P 44 TK (2D) 80.3 (3.16) 90.4 (3.56) (7.50) (4.5) P 2TK(2D) 69.9 (2.75) 90.4 (3.56) (5.00) (4.5) M44P No. of Track RoHS ompliant Positions Size Ref. P ard Width Part Number atalog Number 22 TK(2D) 80.3 (3.16) 90.4 (3.56) (5.00) (4.5) PL 2TK(2D) 69.9 (2.75) 90.4 (3.56) (5.00) (4.5) M22PL 44 TK (2D) 80.3 (3.16) 90.4 (3.56) (7.50) (4.5) PL 2TK(2D) 69.9 (2.75) 90.4 (3.56) (5.00) (4.5) M44PL 204 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK:

11 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. 8 Pin Octal Socket ssemblies SM8 and 608R 318R, 208R, 608R, 218R 4,8 (0.19) Dia. (2 Pl.) D 76, R R, 218R, 318R Rating 10, 150V Screws #4-40 zinc plated with clear chromate, with wire clamp Wire Range 4-22 WG ails R1, T1(see accessory page 212) 608R Rating 10, 250V Screws #6-32 zinc plated with wire clamp Wire Range WG ails R1, T1(see accessory page 212) SM8 Rating 10, 300V Material S ontacts Tin over copper-plated phosphor-bronze. Screws #6-32 zinc plated with clear chromate with wire clamping plates Wire Range WG 60 [140 F] SNPTRK hannel SM8 22,6 (.89) Surface Panel Mounted Mounted 69,9 (2.75) 33,3 (1.31) Track Mounted Mounted Non RoHS ompliant RoHS ompliant Part atalog SNPTRK D Number Number hannel 3.16 (80.3) 1.13 (28.7) 2.00 (50.8) 1.69 (42.9) R TK2(D) 3.16 (80.3) 1.13 (28.7) 1.50 (38.1) R TK2(D) 2.90 (73.7) 1.13 (28.7) 1.50 (38.1) R 2TK2(D) 3.16 (80.3) 1.13 (28.7) 2.00 (50.8) 1.69 (42.9) R TK2(D) SM8 2TK2 Note: SM8 is a molded product with mounting holes provided. Wire-lamp Screw 76,2 8,3 (.325) SM ,0 (1.30) 40,6 (1.60) 6-32 Screw SNPTRK 2TK Series hannel SNPTRK Related Product Data Sockets on this page will fit the following relays: Tyco Electronics Relay Series S, S, SE, SR, SS, SST, VM P& Relay Series, D, G, H, K, R, N1, NS, S, KRP/KRP, S89R P, 155 SHRK Relay Series MT For more information on Relays request atalog RoHS ompliant Part atalog SNPTRK D Number Number hannel 3.16 (80.3) 1.13 (28.7) 2.00 (50.8) 1.69 (42.9) RL TK2(D) 3.16 (80.3) 1.13 (28.7) 1.50 (38.1) RL TK2(D) 2.90 (73.7) 1.13 (28.7) 1.50 (38.1) RL 2TK2(D) 3.16 (80.3) 1.13 (28.7) 2.00 (50.8) 1.69 (42.9) RL TK2(D) SM8 2TK2 Note: SM8 is a molded product with mounting holes provided. Interface Module Systems 4 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK: LR49571 E

12 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. 11 Pin Socket ssemblies SM11 and 611R 4,8 (0.19) Dia. Holes (2Pl) D 71,12 (2.8) R R, 311R Rating 10, 150V Screws #4-40 zinc plated with clear chromate with wire clamps Wire Range WG ails R1, T1 (see accessory page 212) 611R Rating 10, 250V Screws #6-32 zinc plated with clear chromate, with wire clamps. Wire Range WG ails R1, T1 (see accessory page 212) SM11 Rating 10, 300V Material S 60 [140 F] ontacts Tin over copper-plated phosphor-bronze. Screws #6-32 zinc plated with clear chromate, with wire clamps Wire Range WG ails R5 (see accessory page 212) SM11 23,9 (.94) 69,9 (2.75) Panel Mounted 34,5 (1.36) Track Mounted Wire-lamp Screw 73,7 (2.90) 8,3 (.325) 4,1 (.16) Dia. (2 Pl.) SNPTRK hannel 33,0 (1.30) 50,0 (1.97) 60,2 (2.37) 6-32 Screw SM SNPTRK hannel Non RoHS ompliant RoHS ompliant Part atalog SNPTRK D Number Number hannel 3.16 (80.3) 1.13 (28.7) 2.13 (54.1) 1.18 (46.0) R TK2(D) 2.90 (73.7) 1.13 (28.7) 2.13 (54.1) 1.18 (46.0) R 2TK2(D) 3.16 (80.3) 1.13 (28.7) 2.75 (69.9) 2.30 (60.5) R TK2(D) SM11 2TK Note: SM11 is a molded product with mounting holes provided. Related Product Data Sockets on this page will fit the following relays: Tyco Electronics Relay Series SF, SS, S, S, SST P& Relay Series, D, G, H, K, NM5, NS, NT, KP, KRP/KRP,155 SHRK Relay Series MT For more information on Relays request atalog RoHS ompliant Part atalog SNPTRK D Number Number hannel 3.16 (80.3) 1.13 (28.7) 2.13 (54.1) 1.18 (46.0) RL TK2(D) 2.90 (73.7) 1.13 (28.7) 2.13 (54.1) 1.18 (46.0) RL 2TK2(D) 3.16 (80.3) 1.13 (28.7) 2.75 (69.9) 2.30 (60.5) RL TK2(D) SM11 2TK Note: SM11 is a molded product with mounting holes provided. 206 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK: LR49571 E58648

13 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. 16 Pin Miniature Socket ssemblies 204S D 76, XOXS Rating 5,150V 105 Screws #4-40 zinc plated with captive wire clamping plate Wire Range WG ails 204S-R4 (see accessory page 212) SNPTRK hannel Wire-lamp Screw 4,8 (.19) Dia. (2 Pl.) Related Product Data Sockets on this page will fit the following relays: P& Relay Series R10 For more information on Relays request atalog D Fits Relay Non RoHS ompliant RoHS ompliant Part atalog SNPTRK Number Number hannel 3.16 (80.3) 1.00 (25.4) 1.50 (38.1) 2PDT S TK2(D) 3.16 (80.3) 1.00 (25.4) 2.50 (63.5) 2.13 (54.1) 4PDT S TK2 Note: Holes provided for bails, see page 212. D Fits Relay RoHS ompliant Part atalog SNPTRK Number Number hannel 3.16 (80.3) 1.00 (25.4) 1.50 (38.1) 2PDT SL TK2(D) 3.16 (80.3) 1.00 (25.4) 2.50 (63.5) 2.13 (54.1) 4PDT SL TK2 Note: Holes provided for bails, see page 212. Interface Module Systems 4 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK: LR49571 E

14 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. 14 Pin Miniature Socket ssemblies 214S D Ratings 5,150V 71,2 (2.8) S 214S, 314S Screws #4-40 zinc plated with clear chromate, with captive wire clamping plate Wire Range WG 614S Screws #6-32 zinc plated with clear chromate, with wire clamp Wire Range WG 4,8 (.19) Dia. (2 Pl) Wire-lamp Screw SNPTRK hannel Related Product Data Sockets on this page will fit the following relays: P& Relay Series KHU/KHU, 156, 158 SHRK Relay Series PT For more information on Relays request atalog D Fits Relay Non RoHS ompliant RoHS ompliant Part atalog SNPTRK Number Number hannel 3.16 (80.3) 1.06 (26.9) 2.50 (63.5) 2.13 (54.0) 4PDT S TK2(D) 2.90 (73.7) 1.06 (26.9) 2.50 (63.5) 4PDT S 2TK2(D) 3.16 (80.3) 1.13 (28.7) 2.75 (69.9) 4PDT S TK2(D) Note: Holes provided for bails, see page 212. D Fits Relay RoHS ompliant Part atalog SNPTRK Number Number hannel 3.16 (80.3) 1.06 (26.9) 2.50 (63.5) 2.13 (54.0) 4PDT SL TK2(D) 2.90 (73.7) 1.06 (26.9) 2.50 (63.5) 4PDT SL 2TK2(D) 3.16 (80.3) 1.13 (28.7) 2.75 (69.9) 4PDT SL TK2(D) Note: Holes provided for bails, see page atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK: LR49571 E58648

15 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. 11 Pin Square Socket ssemblies 608S Wire-lamp Screw 608S 76,2 611S 608S, 611S Rating 10, 250V Screws #6-32 zinc plated with clear chromate, with wire clamp Wire Range WG 211S Rating 10, 150V Screws #4-40 zinc plated with clear chromate, with wire clamp Wire Range WG TK Series SNPTRK hannel Related Product Data Sockets on this page will fit the following relays: Tyco Electronics Relay Series ST P& Relay Series L, U, KUEP, KUIP, KUMP, KUGP, KUL, KUP, SDS-01, 157 SHRK Relay Series RM2/3/7, RM5/6 For more information on Relays request atalog Fits Relay Non RoHS ompliant RoHS ompliant Part atalog SNPTRK Number Number hannel 3.16 (80.3) 1.06 (26.9) 2.13 (54.1) SPDT, DPDT S TK2(D) 3.16 (80.3) 1.13 (28.7) 2.00 (50.8) 3PDT S TK2(D) 3.16 (80.3) 1.13 (28.7) 2.50 (63.5) DPDT, 3PDT S TK2(D) Fits Relay RoHS ompliant Part atalog SNPTRK Number Number hannel 3.16 (80.3) 1.06 (26.9) 2.13 (54.1) SPDT, DPDT SL TK2(D) 3.16 (80.3) 1.13 (28.7) 2.00 (50.8) 3PDT SL TK2(D) 3.16 (80.3) 1.13 (28.7) 2.50 (63.5) DPDT, 3PDT SL TK2(D) Interface Module Systems 4 211S ONLY atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK: LR49571 E

16 Note: ll part numbers are RoHS ompliant. UHNN Terminal locks Individual Sockets 8R Socket Ratings 10/300V polyester olor lack 130 [266 F] ontacts Phosphor-bronze, bright acid-tin plated 45 (Eight Equal ngles) 8 Slots, Equally Spaced 9,52 Dia. (.375) 26,67 (1.050) Dia. Slot enter 11R, 8R Related Product Data 0,89 ± 0,127 (.035) (.005) Sockets 8S and 11S will fit the following relays: GSTT Relay Series ST P&/MIDTEX Relay Series L, U, KUEP, KUIP, KUMP, KUGP, KUL, KUP, SDS-01, 157 SHRK Relay Series RM2/3/7, RM5/6 Socket 21S will fit the following relays: P& Relay Series R10 Socket 14S will fit the following relays: P&/MIDTEX Relay Series KHU/KHU, 156, 158 SHRK Relay Series PT Socket 8R will fit the following relays: GSTT Relay Series S, S, SE, SR, SS, SST, VM P&/MIDTEX Relay Series, D, G, H, K, R, N1, NS, S, KRP/KRP, S89R P, 155 SHRK Relay Series MT Socket 11R will fit the following relays: Tyco Electronics Relay Series SF, SS, S, S, SST P& Relay Series, D, G, H, K, NM5, NS, NT, KP, KRP/KRP, 155 SHRK Relay Series MT For more information on Relays request atalog ,89 ± 0,127 (.035) (.005) 11R Socket 2,54 ±.005 (.100) (Eleven Equal ngles) 2,54 ±.005 (.100) Eleven Slots Equally Spaced 0,44 (.0175 R Max. 0,89 ± (.035) ,54 ± (.100) 9,52 Dia. (.375) 0,89 ± (.035) Punched Slot Detail 0,44 (.0175 R Max. 2,54 ± (.100) ,58 Dia. (1.125) Slot enter Routed Slot Detail Socket Style Fits Relays 2PDT Part Number atalog Number 8S-SOKET 3PDT 2PDT S-SOKET 21S-SOKET 4PDT S-SOKET R-SOKET R-SOKET 8 pin octal 11 pin E atalog Revised are in millimeters and inches unless otherwise specified. are shown for reference purposes only. Specifications subject to change. US: anada: Mexico: merica: South merica: Hong Kong: Japan: UK:

17 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. SNPTRK hannel SNPTRK hannel can be mounted on standard DIN rails or Series rail when used with TKD. (Rails not included.) SNPTRK hannel is a nonconductive, rigid extruded PV chassis used for mounting socket assemblies and custom circuit boards. vailable in a variety of fixed widths, including a split-apart version for wider P applications, SNPTRK hannel mounts to panels quickly with rivets or screws. Printed circuit boards are simply snapped-in from the front, then held securely via intergral ribs which also serve as shock absorbers when the P is flexed. SNPTRK hannel permits easy, convenient P removal for field service. Slots on 2-inch centers are provided for fast, easy installation using either plastic rivets or other hardware. Double-faced tape may also be used effectively. 4,75 (.187) Std. Full R 5,1 (2.0) 19,1 (.75) 52,5 (2.1) TK2D, 2TK2D, 3TK2D, 6TK2D Panel Mount, or use with TKD to Mount on DIN Rail and Series Rail 19,81 (.78) 58,42 (2.30) RDI 6,35 (.25) 19,05 (.75) 9,65 (.38) TKD use with SNPTRK hannel to Mount on DIN Rail or Series Rail 6,35 (.25) 19,1 (.75) Typ. 5,1 (2.0) Track atalog No.* P.. oard Overall Width Track Width 8TK2-xx 55.5 (2.187) 58.4 (2.3) 2TK2-xx 69.9 (2.75) 73.7 (2.9) 2TK2D-xx 69.9 (2.75) 73.7 (2.9) TK2-xx-G (3.1) TK2D-xx-G (3.1) 3TK2-xx 82.6 (3.25) 86.4 (3.40) 3TK2D-xx 82.6 (3.25) 86.4 (3.40) 6TK2-xx (4.0) (4.15) 6TK2D-xx (4.0) (4.15) 4TK2-xx SPLIT-PRT Note: Standard lengths are 3, 6, 12, 24, and 48. ustom lengths are available. *Replace xx with track length. 4,8 (.187) Typ. 80,3 (3.16) 25,4 (1.0) 19,1 (.75) Typ. Length 5,1 (2.0) Length Score for Split apart 8,9 (.35) 11,6 (.46) TK2, 3TK2, 8TK2, 2TK2, 6TK2 Panel Mount 4TK2 Panel Mount 8,9 (.35) 9,2 (.3.0) 4,8 Typ. (.187) Typ. 11,6 (.46) 17,8 (.70) 17,8 (.70) Interface Module Systems 4 atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK: LR89715 E

18 UHNN Terminal locks Note: ll part numbers are RoHS ompliant. ccessories Track Rivets Plastic Track Rivet offers a low cost way to mount SNPTRK hannel. Requires 3/16 diameter hole in panels up to.125 thick. at. No. TR-1 TR-1 Track Rivet ails (Tie Downs) Helps prevent relays and timers from vibrating out of sockets. R1-G and T1, for general purpose relays and timers, feature adjustable height; mount on P board with plastic mounting rivets (2) furnished. New economy R5 spring bails fits most general purpose relays and timers. R4 clip to miniature sockets. Stainless steel wire. 34,0 (1.3) 58,8 (2.4) R1-G Relay ail ,3 (1.9) 24,6 (.97) 96,5 (3.8) T1 Timer ail ,3 (1.35) R5-G Universal ail R4-G atalog are in millimeters are shown for US: South merica: Revised 6-07 and inches unless otherwise reference purposes only. anada: Hong Kong: to change.. merica: UK:

(MR) Miniature Rectangular Connectors (Continued)

(MR) Miniature Rectangular Connectors (Continued) Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug

More information

AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]

AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35] MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page

More information

Commercial MATE-N-LOK Connectors

Commercial MATE-N-LOK Connectors MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe

More information

AMPMODU System 50 Connectors

AMPMODU System 50 Connectors AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle

More information

MTA-156 IDC Quad Connectors

MTA-156 IDC Quad Connectors MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru

More information

Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch

Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch (Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications Fine Pitch SMT Stacking Connectors (Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications

More information

Dynamic Series Connectors

Dynamic Series Connectors D-5000 Series Series profile The Dynamic 5000 series was developed for up to 5 amperes in response to the demand for improved reliability and productivity for the main power lines in equipment. They can

More information

Mini-Universal MATE-N-LOK 2 Connectors

Mini-Universal MATE-N-LOK 2 Connectors MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide

More information

TX1/TX2/TX3 SERIES CONNECTORS

TX1/TX2/TX3 SERIES CONNECTORS TX 1 to 3 Series connectors are two-piece PC connectors with 1.27mm (.050") contact spacing. They are designed for board-to-cable applications. Configurations include IDC sockets (TX1 and TX2) for flat

More information

Product Compliant to DIN41612/IEC603-2 Standard

Product Compliant to DIN41612/IEC603-2 Standard Product ompliant to IN41612/IE603-2 Standard PN Series Pin Header Side Straight through hole type Receptacle Side Straight through hole PN10E- * *P-2.54S PN10E-* *S-2.54S PN10-* *S-2.54S PN10E-* *S-2.54S

More information

Mini-Universal MATE-N-LOK Connectors

Mini-Universal MATE-N-LOK Connectors MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used

More information

RX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm

RX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible

More information

Archer Connectors. Archer Kontrol. 1.27mm (.050") PITCH

Archer Connectors. Archer Kontrol. 1.27mm (.050) PITCH rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.

More information

Mini-Universal MATE-N-LOK Connectors

Mini-Universal MATE-N-LOK Connectors MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used

More information

The con ectors serve low durability cycle applications

The con ectors serve low durability cycle applications Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at

More information

AMPMODU Interconnection System

AMPMODU Interconnection System AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors.00 x.00 [1.27 x 1.27] Centerline.00 x [1.27 x 2.4] Centerline AMPMODU 2mm Connectors x [2.4 x 2.4] Centerline.12 x.12 [3.18 x 3.18] Centerline.16

More information

Commercial Connector Catalog

Commercial Connector Catalog ommercial onnector atalog Delphi onnection Systems is a global leader as a connection system provider. We offer full-service integration designing, engineering and manufacturing a comprehensive line of

More information

SYSTEM CJ TELEPHONE JACKS & MODULAR PLUGS

SYSTEM CJ TELEPHONE JACKS & MODULAR PLUGS SYSTEM TELEPHONE JKS & MODULR PLUGS vilux Introduction System contains splice termination regular modular plugs, category 5 modular plugs and board mount and surface mount telephone jacks. The modular

More information

Electrical Components Catalog Universal MATE-N-LOK Connector System

Electrical Components Catalog Universal MATE-N-LOK Connector System Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation

More information

CROWN CLIP Series Sockets

CROWN CLIP Series Sockets OWN LIP Series Sockets Product Facts ompact design High performance OWN BND contacts urrents to 350 mps 1 Mates with solid or laminated blades Supports true hot-plug (current interruption)2 Float-mount

More information

Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings

More information

KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC

KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC P& KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 mp 150VDC Load Switching KUMP 15 mp 2VC File E2255 File LR1534 0435 Registration 12 (KUIP) 0435

More information

Mini-Universal MATE-N-LOK Connectors

Mini-Universal MATE-N-LOK Connectors MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used

More information

F SERIES 2.5mm PITH DRWER ONNETOR ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts 004 : 4 pin 006 : 6 pin 00

F SERIES 2.5mm PITH DRWER ONNETOR ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts 004 : 4 pin 006 : 6 pin 00 2.5mm Pitch Drawer onnector rimping Termination for able ssembly F SERIES K-1 F SERIES 2.5mm PITH DRWER ONNETOR ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts

More information

Single Slot SMT Connectors for Card-Bus Based PC Cards

Single Slot SMT Connectors for Card-Bus Based PC Cards Single Slot SMT onnectors for ard-us ased P ards I14 Series P ard Standard ompliant oard Space-Saving SMT Unit Guide Unit Secure board retention Features 1. Space-Saving design facilitates pattern routing

More information

SEPTEMBER C.CS.1000 / GB

SEPTEMBER C.CS.1000 / GB SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness

More information

AMPMODU Headers and Receptacles,.100 [2.54] Centerline

AMPMODU Headers and Receptacles,.100 [2.54] Centerline MPMODU.02 [0.64] Square Interconnection System MPMODU Headers and Receptacles, enterline 6-146293-0 SR VT-RET 6-146281-0 SR VT 6-146490- DR Stacking Header 6-341-0 SR Top Entry 8760-1 ulkhead Header 6-34237-8

More information

KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC

KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 mp 150VDC Load Switching KUMP 15 mp 2VC File E2255 File LR1534 0435 Registration 12 (KUIP) 0435

More information

APPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1

APPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1 APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable

More information

Product Certification. Approvals/Certifications. Environmental. Foam-in-place polyurethane. Plastic Mounting Plate

Product Certification. Approvals/Certifications. Environmental. Foam-in-place polyurethane. Plastic Mounting Plate ulletin eneral Purpose nclosures Specifications ulletin eneral Purpose nclosures Type R,, X,, and rainproof, watertight, corrosion resistant, and dusttight, IP protection Designed for use as automation

More information

PSI CONNECTOR. 1Certified LR R Specifications. Standards. 4.0mm pitch/disconnectable Crimp style connectors

PSI CONNECTOR. 1Certified LR R Specifications. Standards. 4.0mm pitch/disconnectable Crimp style connectors PSI ONNETOR.0mm pitch/disconnectable rimp style connectors Wire-to-wire type Secure locking structure Mis-mating prevention mechanism by keying ( to circuits/ kinds of keying) Finger-friendly design Large

More information

Bulletin 1494H Heavy Duty Safety Switches

Bulletin 1494H Heavy Duty Safety Switches ulletin H Heavy uty Safety isconnect Switches Product Overview/Product Selection Fusible and Non-Fusible Type ulletin H Heavy uty Safety Switches switch ratings Type, R, or enclosures V: -phase, -phase,

More information

Catalog Revised Ribbon Cable Interconnect Solutions. Ribbon Cable Interconnect Solutions

Catalog Revised Ribbon Cable Interconnect Solutions. Ribbon Cable Interconnect Solutions Catalog 82012 Revised 10-09 Ribbon Cable Interconnect Solutions onents.com Ribbon Cable Interconnect Solutions Ribbon Cable Connector Selection Guide Ribbon Cable Connector Selection Guide Mates to.050"

More information

PCB Hardware. Contents. SMT Test Points SMT Cable Clips SMT Jumper Links PCB Jumper Links PCB Terminals, Turret Lugs Spacers / Pillars / Standoffs

PCB Hardware. Contents. SMT Test Points SMT Cable Clips SMT Jumper Links PCB Jumper Links PCB Terminals, Turret Lugs Spacers / Pillars / Standoffs PC Hardware Contents SMT Test Points SMT Cable Clips SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with standard probes,

More information

343

343 .050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature

More information

Universal MATE-N-LOK Connectors

Universal MATE-N-LOK Connectors Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability

More information

2.5mm Pitch Drawer Connector Crimping Termination for Cable Assembly FA SERIES A-1

2.5mm Pitch Drawer Connector Crimping Termination for Cable Assembly FA SERIES A-1 2.5mm Pitch Drawer onnector rimping Termination for able ssembly F SERIES -1 ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts 008 : 8 pin 020 : 20 pin 0 : pin 022

More information

PCB Single Row Connectors

PCB Single Row Connectors PB Single Row onnectors Right ngle Mount Thru Hole PB onnectors with Mounting Ears - How to Order Right ngle Thru Hole PB Nano onnectors with Mounting Ears feature gold alloy TwistPin contacts. These nanomimiature

More information

.050" IDC Connectors for.025" Ribbon Cable - M73 Series

.050 IDC Connectors for.025 Ribbon Cable - M73 Series .050" IDC Connectors for.025" Ribbon Cable - M73 Series PRT NUMER LEGEND M73X-XXXX-XX STYLE 01 = Low profile.050" IDC Socket for single layer.025" Flat Cable 02 = Standard profile IDC Socket for single

More information

PCB Hardware. Contents

PCB Hardware. Contents PC Hardware Contents SMT Test Points SMT Cable Clips Coin Cell Holders SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with

More information

MDSM is the commercial industry s

MDSM is the commercial industry s MSM is the commercial industry s smallest -type connector for shielded I/O wire-to-board applications. Requiring less than 1/3 the area of a traditional Subminiature connector, MSM is designed for situations

More information

Introduction to High Current Card Edge Connectors

Introduction to High Current Card Edge Connectors Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled

More information

Standard Products Assembly Equipment Table 3M Electronic Products Division

Standard Products Assembly Equipment Table 3M Electronic Products Division Plug Connectors 3M plug connectors can be used with either flat cable or discrete wire and are the ideal interface for standard sockets. They can be used as a T-tap from a cable bus, a splice connector

More information

General Specifications

General Specifications Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity

More information

ORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201

ORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201 HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36

More information

AMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors

AMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability

More information

D-Series High Reliability Circular Connectors

D-Series High Reliability Circular Connectors D-Series High Reliability Circular Connectors Technology Company, Inc. integramate D-Series Circular Connectors QA Technology integramate D-Series Connectors are high quality, plastic circular connectors

More information

General Specifications

General Specifications Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity

More information

V.35 - Interface connectors

V.35 - Interface connectors V.35 DTE/DCE Interface connectors Description The Telecommunications Standardization Sector TSS V.35, formerly CCITT V.35 is the international standard termed Data Transmission at 48 Kbps using 60-108

More information

IP68 Sealed - Mini USB Buccaneer

IP68 Sealed - Mini USB Buccaneer IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB

More information

IDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41

IDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)

More information

XAC34SF2A010 XAC34PM1A000 XAC34PC1A700

XAC34SF2A010 XAC34PM1A000 XAC34PC1A700 X Series X34SF2010 X34PM1000 X34P1700 SPEIFITIONS Designed for external installation, the X is the MR removable contact connector equipped with protective shells and mounting plates for chassis or cable

More information

3M Pak 100 Wiremount Plug Series

3M Pak 100 Wiremount Plug Series Pak 100 Wiremount Plug Shrouded to protect against physical and chemical pin damage Open or closed end covers available Optional ejector latches Accepts flat cable or discrete wire Military (with 3518

More information

Technical data: Pin Spacing

Technical data: Pin Spacing 282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,

More information

NEW ITEM THERMOPLASTIC A - TYPE FLANGE 3 CONTACT

NEW ITEM THERMOPLASTIC A - TYPE FLANGE 3 CONTACT NEW ITEM AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A - TYPE FLANGE 3 CONTACT Features: Thermoplastic Shell Industry standard PC footprints. Vertical or Horizontal PC mounting. Precision machined pin contacts.

More information

Archer Connectors. Archer Kontrol. 1.27mm (.050") PITCH

Archer Connectors. Archer Kontrol. 1.27mm (.050) PITCH rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.

More information

TEMPERATURE RATINGS: Terminal Housing: 290 C (554 F) UL94VO Housing: 115 C (239 F) UL94VO

TEMPERATURE RATINGS: Terminal Housing: 290 C (554 F) UL94VO Housing: 115 C (239 F) UL94VO The KO4300 Series Enclosures feature high density double level terminals making them ideal for many electronic applications. They are small to medium in size ranging from 6 to 64 terminals. There are 4

More information

Universal MATE-N-LOK Headers for UMNL II Connectors

Universal MATE-N-LOK Headers for UMNL II Connectors for UMNL II Connectors PC Board Vertical Pin Headers [6.5] Centerline spacing,, and 5 Circuit, In-Line Housing Nylon Flammability ating UL9V-0 Contacts Phosphor bronze Solder tail diameter.06 [1.57] elated

More information

Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks

Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks Series A2000, LP2000 & C2000 Single Row Terminal A20510807WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG CU Screw Size:

More information

.093 Commercial Pin and Socket Connectors

.093 Commercial Pin and Socket Connectors Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting

More information

Telephone Accessories USA / Canada - Telefon-Zubehör

Telephone Accessories USA / Canada - Telefon-Zubehör 7590 01 Standard Flush Mount Jacks Flush mount jacks are available in smooth-finish single-jack or duplex models, and Decora styles. ll feature one-piece construction and install easily in standard electrical

More information

8Rectangular Pin and Socket Connectors

8Rectangular Pin and Socket Connectors AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available

More information

Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors

Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors P Series 79 Micro-rimp Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight P Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits.

More information

Heavy Duty Terminal Blocks

Heavy Duty Terminal Blocks General Information: are available in two styles Deadfront Type (1100, 1200, 985 and 0987 series) and Barrier Type (1500, 1600 and 1700 series). Ratings and Standards: The voltage ratings of terminal blocks

More information

AMPMODU Interconnection System

AMPMODU Interconnection System AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors x [1.7 x 1.7] x [1.7 x.54] AMPMODU mm Connectors x [.54 x.54].15 x.15 [3.18 x 3.18].156 [3.96] 1 3 4 5 6 7 Disclaimer While Tyco Electronics

More information

FASTON Printed Circuit Board Tabs and Receptacles

FASTON Printed Circuit Board Tabs and Receptacles FSTON Tabs and eceptacles Product Facts Full line of PC tabs and receptacles Straight and right-angle tabs available in 50, 87 and 0 series eceptacles produced in 50/05 x 03 or 05 Standard or low insertion

More information

Introduction. The information pages provide standard data common to all D-subminiature connectors. These include:

Introduction. The information pages provide standard data common to all D-subminiature connectors. These include: Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications

More information

Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks. Terminal Blocks: Single Row. EuroMag Series.

Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks. Terminal Blocks: Single Row. EuroMag Series. Series A2000, LP2000 & C2000 Terminal locks A201108WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG Cu Screw Size: #6-32

More information

Power Connectors & Interconnection Systems

Power Connectors & Interconnection Systems Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and

More information

PC/104, PC/104 Plus Specification

PC/104, PC/104 Plus Specification PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch

More information

M Series Pin and Socket Connectors. RoHS. Ready

M Series Pin and Socket Connectors. RoHS. Ready M Series RoHS Ready M Series Connectors Product Facts Most connectors intermateable with connectors made to MIL-C-28748 requirements Wide range of connector styles and sizes: standard connectors (unloaded),

More information

PGA / BGA / PLCC SOCKETS

PGA / BGA / PLCC SOCKETS PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169

More information

Item No.: /

Item No.: / mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter

More information

AMP Soft Shell Pin and Socket Connectors

AMP Soft Shell Pin and Socket Connectors Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components

More information

Series 801 Mighty Mouse Double-Start ACME Thread Receptacle

Series 801 Mighty Mouse Double-Start ACME Thread Receptacle Series 0 Mighty Mouse ouble-start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Rear Panel Jam Nut Mount Shell Style 0 Square Flange Mount Shell Style 0// In-Line Shell Style 0 How

More information

DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability

DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end

More information

Relays & Sockets. RQ Series. RQ Series PCB Relays Part Number Selection

Relays & Sockets. RQ Series. RQ Series PCB Relays Part Number Selection Q Series Q Series PB elays Switches & Pilot Lights Display Lights IDE Q relays are low-profile, PB relays that provide quality within a compact package. Size equals value. Q relays are small, yet maintain

More information

3.3. Inductive Proximity Sensors. Contents Description. E57PS Performance Short Body Sensors. E57PS Performance Short Body Sensors..

3.3. Inductive Proximity Sensors. Contents Description. E57PS Performance Short Body Sensors. E57PS Performance Short Body Sensors.. . Product escription Features For demanding sensing 60 LE indicator applications in areas too small Stainless steel tube for standard length units, the 10 48 Vdc operating E57PS Performance Short ody series

More information

Termination End. Figure 1

Termination End. Figure 1 AMP- LATCH* Application Specification Universal Headers 114-40020 with ACTION PIN* Contacts 19 DEC 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions

More information

Altech s DIN Enclosures by

Altech s DIN Enclosures by Altech s DIN Enclosures Since 98 Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff

More information

J DSUBMINIATURE CONNECTOR SERIES

J DSUBMINIATURE CONNECTOR SERIES J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses Costs

More information

TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE Standard. TE Internal Number: Alias ID:

TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE Standard. TE Internal Number: Alias ID: TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS PCB D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE

More information

MiniModule Connector WR-MM

MiniModule Connector WR-MM MiniModule onnector WR-MM 09/08-1 MiniModule onnector WR-MM ompact and low profile ID connectors for ribbon cable 1.27mm pitch. ontact number from 4 to 26 pin. able type, through hole, SMD or P type. Features:

More information

General Specifications

General Specifications Half-Inch Diameter Process Sealed Rotaries Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications Electrical

More information

D-SUBMINIATURE PIN-IN-PASTE CONNECTORS

D-SUBMINIATURE PIN-IN-PASTE CONNECTORS INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,

More information

Inductive Proximity Sensors E57 Premium+ Series

Inductive Proximity Sensors E57 Premium+ Series 1 ontents Overview.................... 1 Model Selection, Sensors....... 2 Model Selection, ompatible onnector ables............. 5 Wiring iagrams.............. 6 Specifications................. 7 Model

More information

Dura-ConTM Hermetic Connectors

Dura-ConTM Hermetic Connectors Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard

More information

HD10 Series. Contents. HD10 Series Overview PG 74. Part Numbering System PG 74. Dimensions PG 74. Connector Styles PG 75

HD10 Series. Contents. HD10 Series Overview PG 74. Part Numbering System PG 74. Dimensions PG 74. Connector Styles PG 75 ontents H10 Series Overview PG 74 Part Numbering System PG 74 imensions PG 74 onnector Styles PG 75 onnector onfigurations PG 75 Special Modifications PG 75 ccessories PG 76-78 73 H10 Series Overview The

More information

2.54mm (.100") Pitch Connectors

2.54mm (.100) Pitch Connectors mm (.100") Pitch Connectors HRWIN plc Fitzherbert Road, Farlington, Portsmouth, Hampshire, PO6 1RT, UK Tel: (Sales) +44 (0) 23 9237 0451 Tel: (dmin) +44 (0) 23 9231 4545 Fax: +44 (0) 23 9231 4590 Sales,

More information

Han R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.

Han R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing. Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet 0039-4 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact

More information

Application Specification IMPACT* Standard Connector Systems 05 NOV 10 Rev A

Application Specification IMPACT* Standard Connector Systems 05 NOV 10 Rev A Application Specification IMPACT* Standard 114-13258 Connector Systems 05 NOV 10 Rev A NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters.

More information

RIBBON CABLE CONNECTORS

RIBBON CABLE CONNECTORS TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal

More information

SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES

SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page 1 of 15 CONTENTS CLAUSE PAGE 1.0 SCOPE..

More information

Battery Retainer Guide

Battery Retainer Guide Battery Retainer Guide Product Overview: Coin cell retainers are simple metal contacts that both electrically connect coin cells and hold them in place, while taking up minimal additional space on the

More information

CONNECTORS & RECEPTACLES

CONNECTORS & RECEPTACLES STRAIGHT CORD PLUG with Extended Barrel TYPE 12BL6M TYPICAL Male plug with ground key-rib. Nickel-plated diecast handle. Contact friction coupling. Flexible black strain relief. Heavy duty cable clamp.

More information

CONNECTORS & RECEPTACLES

CONNECTORS & RECEPTACLES TINI Q-G MINIATURE CONNECTORS DESIGN FEATURES STYLE Streamlined, miniaturized with nickel-plated metal and contrasting black plastic parts. Designed for light weight and unobtrusiveness. Also available

More information

Description of parts Panel mounting Insert mounting without/with Carrier element Plastic housings

Description of parts Panel mounting Insert mounting without/with Carrier element Plastic housings - Contents Page Features -... 11.02 Component range -... 11.03 Description of parts... 11.04 Latching parts without/with Strain relief and Panel mounting parts... 11.06 Panel mounting... 11.08 Insert mounting

More information

Item No.: /

Item No.: / Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female

More information

SECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS

SECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS PC BOARD HARDWARE SECTION CONTENTS COMPUTER BRACKETS........... 123-125 COMPUTER BRACKET WORKSHEET. 126-127 MOUNTING BRACKETS................ 118-119 PC BOARD ACCESSORIES Board Guides..........................

More information

Series 2M801 Connector

Series 2M801 Connector 1 Series 2M801 Connector PDS-223 Ordering Guide for 2M801 Plug and Receptacle 1. 2. 3. 4. 5. 6. Series Style Service Class - Insert Arrg. Contact Type Alternate Position 2M801-00X -16 M 7-10 P A KEYING

More information