The Leading Enterprise Internet of Things Solution. Wireless Temperature Sensors TEMPERATURE. General Description. Features of Monnit ALTA Sensors

Transcription

1 by The Leading Enterprise Internet of Things Solution TEMPERATURE Wireless Temperature Sensors General Description The ALTA Wireless Temperature Sensor uses a type NTC thermistor to measure temperature. Accurate to ± 1 C (± 1.8 F) Increased accuracy by user calibration to ± 0.25 C (± 0.45 F) Principle of Operation The ALTA Wireless Temperature Sensor outputs the ambient temperature in degrees Fahrenheit. It is programmed to sleep for a user-given time interval (heartbeat) and then wakeup, send power to the NTC Thermistor and wait for it to stabilize, and convert the analog data, mathematically compute the temperature and transmit the data to the gateway. To stay within the abilities of the processor, the temperature is computed off a data table provided by the manufacturer. To reduce error, a variable resistor configuration is implemented over specified temperature ranges. Example Applications Ambient Temperature Monitoring Environmental Monitoring Smart Machines & Smart Structures HVAC Operation & Testing Data Center Monitoring And many more... Features of Monnit ALTA Sensors Wireless range of 1,000+ feet through walls.* Frequency Hopping Spread Spectrum (FHSS). Improved interference immunity. Improved power management for longer battery life.** (10+ years on AA batteries) Encrypt-RF (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages). Onboard data memory / storage (up to 512 readings per sensor) min heartbeats = 3.5 days - 2 hour heartbeats = 42 days Over-the-air updates (future proof). Free imonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and . * Actual range may vary depending on environment. ** Battery life is determined by sensor reporting frequency and other variables. Other power options are also available. Comparison Monnit Monnit ALTA Other Wireless Platforms Wifi Bluetooth PAGE 1

2 1.125 in ( mm) 2.0 in (50.8 mm) in ( mm) ALTA Commercial Coin Cell Wireless Temperature Sensor - Technical Specifications Supply Voltage VDC * Operating Temperature Range (Board Circuitry and Coin Cell) -7 C to +60 C ( 20 F to +140 F ) ** Optimal Battery Temperature Range (Coin Cell) +10 C to +50 C ( +50 F to +122 F ) ( Limited to Main Unit Circuitry, -7 C to +60 C unless wire leads are being used. ) 30 sec 0.7 Ounces * Hardware can not withstand negative voltage. Please take care when connecting a power device. PinchPower Enclosures _ CR2032 BATTERY CR2032 BATTERY + Pinch (press in on the sides) Pull (sensor away from base) Press (sensor back into base) PAGE 2

3 ALTA Commercial AA Wireless Temperature Sensor - Technical Specifications Supply Voltage VDC ( VDC Using Power Supply) * Operating Temperature Range (Board Circuitry and Batteries) -18 C to 55 C (0 F to 130 F) using alkaline -40 C to 85 C (-40 F to 185 F) using lithium ** Optimal Battery Temperature Range (AA) +10 C to +50 C ( +50 F to +122 F ) (Limited to Main Unit Circuitry, -7 C to +60 C unless thermistor leads are being used. 15 sec max 3.7 Ounces * Hardware cannot withstand negative voltage. Please take care when connecting a power device. Power Options The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard V power supply. The line powered version also uses two standard 1.5 V AA batteries as backup for un-interupted operation in the event of line power outage. Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements. PAGE 3

4 Industrial Wireless Sensor in (58.84 mm) in (94.0 mm) Height: in (35.0 mm) ALTA Industrial Wireless Temperature Sensor - Technical Specifications Supply Voltage VDC ( VDC Using Power Supply) * Operating Temperature Range (Board Circuitry and Battery) -40 C to +85 C ( -40 F to +185 F ) ** Included Battery Max Temperature Range: -40 to +85 C ( -40 to +185 F ) Capacity: 1800 mah Optional Solar Feature Solar Panel: 5VDC / 30mA (53mm x 30mm) Charging Temperature Range: Max Temperature Range: Included Rechargeable Battery: 0 to 45 C (32 to 113 F) -20 to 60 C (-4 to 140 F) 600 mah / >2000 Charge Cycles (80% of initial capacity) ( Limited to Main Unit Circuitry, -40 C to +85 C ) Enclosure Rating 30 sec 4.7 Ounces NEMA 1, 2, 4, 4x, 12 and 13 rated, sealed and weather proof UL Rating UL Listed to UL508-4x specifications (File E194432) * Hardware cannot withstand negative voltage. Please take care when connecting a power device. PAGE 4

5 Commercial Grade Sensors: Monnit commercial grade sensors are designed for applications in ordinary environments (normal room temperature, humidity and atmospheric pressure). Do not use these sensors under the following conditions as these factors can deteriorate the product characteristics and cause failures and burn-out. Corrosive gas or deoxidizing gas - chlorine gas, hydrogen sulfide gas, ammonia gas, sulfuric acid gas, nitric oxides gas, etc.). Volatile or flammable gas. Dusty conditions. Under low or high pressure. Wet or excessively humid locations. Places with salt water, oils chemical liquids or organic solvents. Where there are excessively strong vibrations. Other places where similar hazardous conditions exist. Use these product within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality. Industrial Grade Sensors - Type 1, 2, 4, 4X, 12 and 13 NEMA Rated Enclosure: Monnit s Industrial sensors are enclosed in reliable, weatherproof NEMA rated enclosures. Our NEMA rated enclosures are constructed for both indoor or outdoor use and protect the sensor circuitry against the ingress of solid foreign objects like dust as well as the damaging effects of water (rain, sleet, snow, splashing water, and hose directed water). Safe from falling dirt. Protects against wind blown dust. Protects against rain, sleet, snow, splashing water, and hose directed water Increased level of corrosion resistance Will remain undamaged by ice formation on the enclosure For more information about our products or to place an order, please contact our sales department at Visit us on the web at Monnit Corporation 3400 South West Temple Salt Lake City, UT Monnit, imonnit, ALTA, PinchPower, Encrypt-RF and all other trademarks are property of Monnit, Corp Monnit Corp. All Rights Reserved. ADS-A001-1C (1/18)