SECTION ELECTRICAL CONTROL DEVICES
|
|
- Matthew Riley
- 6 years ago
- Views:
Transcription
1 ELECTRICAL CONTROL DEVICES PART 1 GENERAL SCOPE The Contractor shall furnish and install, where indicated on the drawings, equipment with electrical control devices installed as specified herein and shown on the contract drawings. REFERENCES CSA UL SUBMITTALS FOR REVIEW/APPROVAL The following information shall be submitted to the Engineer: Product data sheets SUBMITTALS FOR CONSTRUCTION The following information shall be submitted for record purposes: Final as-built drawings and information for items listed in Paragraph 04, and shall incorporate all changes made during the manufacturing process QUALIFICATIONS For the equipment specified herein, the manufacturer shall be ISO 9001 or 9002 certifie The manufacturer of this equipment shall have produced similar electrical equipment for a minimum period of five (5) years. When requested by the Engineer, an acceptable list of installations with similar equipment shall be provided demonstrating compliance with this requirement. PART 2 PRODUCTS 2.01 MANUFACTURERS Eaton / Cutler-Hammer products * * The listing of specific manufacturers above does not imply acceptance of their products that do not meet the specified ratings, features and functions. Manufacturers listed above are not relieved from meeting these specifications in their entirety. Products in compliance with the * Note to Spe Writer Insert data in blanks /06
2 2.02 specification and manufactured by others not named will be considered only if pre-approved by the Engineer ten (10) days prior to bid date. CONTROL RELAYS D. Control Relays Electro-mechanical 600 V Industrial Control Relays shall be Eaton / Cutler-Hammer type D15, D26, AR or approved equal 2. Contacts shall be rated NEMA A600 with a continuous thermal rating of 10 amperes ac and NEMA P300/P600 with a continuous thermal rating of 5 amperes dc 3. Relays shall be available with interchangeable ac or dc magnetic coils 4. The Control Relays shall be 4-pole as standard and available in any fixed configuration of NO or NC contacts or have convertible contacts. Expansion of the number of available contacts shall be possible through the addition of top mount front deck adders. These adders shall be available in 2-pole or 4-pole units 5. The control relay shall also be capable of conversion to a solid-state or pneumatic timer by addition of a field installable timer attachment Control Relays Solid-State Addressable Relay (ARII). Where shown on the drawings, provide Addressable Relay(s) (ARII), Eaton / Cutler-Hammer type ARII or approved equal capable of being controlled from remote computer over the communications network. The ARII shall have two (2) status indicating circuits, which can be used to transmit the status of external device contacts to a personal computer or programmable logic controller over a twisted pair network up to 7,500 feet. The ARII shall be provided with the following features: One (1) Form C addressable contact shall be rated 115 to 120 Vac, 43.2-ampere make and 7.2-ampere break Three (3) hexadecimal selector switch dials to provide unique addresses for computer identification A light emitting diode (LED) to indicate when the relay is energized An LED shall be provided to indicate active communication status to the communications network e. Communications rate shall be selectable for 9600 baud or 1200 baud over twisted pair of #18 wires f. Relay operation powered from 120 Vac or 48- to 125 Vdc g. Operation suitable over a temperature range of 0 degrees C through 70 degrees. 2. Addressable relay shall have field-settable latch to allow the relay to turn OFF after 10 seconds if communications ON signal not received or to stay ON Breaker Control Relay Where shown on the drawings or herein specified, provide a Breaker Control Relay (BC) for use with electrically operated breakers and having communications capability for remote open or close of the breakers from a personal computer or programmable logic controller over a twisted pair network up to 7,500 feet. The BC shall be equal to Eaton / Cutler-Hammer type ADR Breaker Control Relay, having the following specified features and functions: /06
3 The BC shall be wired to the breaker close and trip coil circuits and serve as supervisory control relays. The BC shall be capable of being activated only from a remote computer by coded signal that selects the proper relay by its address and then commands the relay contacts to close or open. The BC shall have suitable hexadecimal wheels to field program its particular address. The BC shall include the ability to provide remote status indication over the same twisted pair of wires providing OPEN/CLOSE status by monitoring auxiliary contacts located on the breaker. For drawout breakers with Truck Operated Cell (TOC) switches, the BC shall also monitor the position of the TOC switch contacts The BC shall be capable of being powered by either 120 Vac or 48 to 125 Vdc The BC shall have a selectable baud rate of 1200 or 9600 The BC shall be capable of transmitting the following data for real-time display of breaker status: STATUS REASON BREAKER CELL POSITION OPEN NORMAL Connected CLOSED NORMAL Connected TRIP PROTECTIVE RELAY Connected OPEN TEST Test Position CLOSED TEST Test Position TRIP TEST Test Position PUSHBUTTONS Pushbuttons and Pilot Devices shall be Eaton / Cutler-Hammer 30.5 mm, heavy-duty, oiltight type 10250T, E34, or approved equal. -- *OR-- Pushbuttons and Pilot Devices shall be Eaton / Cutler-Hammer 22.5 mm industrial heavyduty type EM22 or approval equal. Device bodies shall be zinc die cast with chrome plating or cathodic epoxy coating. Devices shall utilize a single panel gasket and provide integral grounding by means of either a built-in grounding terminal or a pointed grounding surface integral to the device. D. Devices shall be UL or CSA listed or CE marked for types 1, 2, 3, 3R, 4, 4X, 12 and 13 when mounted in a suitable enclosure with the same ratings. E. Devices shall have an operating temperature range of -17 degrees C to 60 degrees F. Pushbuttons and contact blocks shall have a published mechanical life of not fewer than 5,000,000 operations. SELECTOR SWITCHES Selector Switches shall be Eaton / Cutler-Hammer 30.5 mm, heavy-duty, oil-tight type 10250T, E34 or approved equal. -- *OR -- * Note to Spe Writer Select one /06
4 D. E. Selector Switches shall be Eaton/Cutler-Hammer 22.5 mm, industrial heavy-duty type EM22 or approved equal. Device bodies shall be zinc die cast with chrome plating or cathodic epoxy coating. Devices shall utilize a single panel gasket and provide integral grounding by means of either a built-in grounding terminal or a pointed grounding surface integral to the device. Devices shall be UL or CSA listed or CE marked for types 1, 2, 3, 3R, 4, 4X, 12 and 13 when mounted in a suitable enclosure with the same ratings. Devices shall have an operating temperature range of -17 degrees C to +60 degrees INDICATING LIGHTS D. E. F. Indicating lights shall be Eaton / Cutler-Hammer 30.5 mm, heavy-duty, oil-tight type 10250T, E34 or approved equal. -- *OR -- Indicating lights shall be Eaton / Cutler-Hammer 22.5 mm industrial heavy-duty type EM22 or approved equal. Device bodies shall be zinc die cast with chrome plating or cathodic epoxy coating. Devices shall utilize a single panel gasket and provide integral grounding by means of either a built-in grounding terminal or a pointed grounding surface integral to the device. Devices shall be UL or CSA listed or CE marked for types, 1, 2, 3, 3R, 4, 4X, 12 and 13 when mounted in a suitable enclosure with the same ratings. Devices shall have an operating temperature range of -17 degrees C to 60 degrees Indicating lights shall be *[full voltage LED type] or [push-to-test transformer type]. Lens color shall be as indicated on the contract drawings. TIMERS Pneumatic Timers equal Pneumatic timers shall be Eaton / Cutler-Hammer type C320TP or approved 2. Pneumatic timers shall be available with DPST timed contacts. Output contacts shall be rated 6 A maximum make and 0.6 A maximum break at 600 Vac and 30 A maximum make and 3 A maximum break at 120 Vac 3. Pneumatic timers shall be available with adjustable timing ranges of 0.1 to 30 or 10 to 180 seconds 4. Pneumatic timers shall be convertible from OFF to ON Delay or vice-versa 5. Pneumatic timers must be capable of top mounting to NEMA Size 00 through 2 or IEC Size A through K Freedom starters or contactors and D15 control relays 2.07 CONTROL STATIONS Control Stations shall be Eaton / Cutler-Hammer type standard duty, heavy-duty, 10250T or approved equals. * Note to Spe Writer Select one /06
5 For applications exceeding NEMA Type 1, devices shall be suitable for NEMA Types 4X and 13. Shall be UL listed as complete assembly OPERATOR INTERFACE PANEL (O/I) Eaton/Cutler-Hammer Operator Interface Panel (O/I) Hardware O/Is shall be of modular design for easy installation and shall have the following features: Enclosure rated NEMA 4/NEMA *OR -- Rated NEMA 4X Rated UL/cUL Class I Div 2 Groups A,B,C,D and CE Mark Impact-resistant protective window over display Field-replaceable flat panel backlight. O/Is shall have the following integrated touchscreen display characteristics: *[8.4-inch color TFT flat panel-vga] [12.1-inch color TFT flat panel-svga] [15.0-inch color TFT flat panel-xga]. Non-integrated (blind node) units shall support the following screen resolutions: VGA (640 x 480), SVGA (800 x 600), XGA (1024 x 768), SXGA (1280 x 1024) and UXGA (1600 x 1200) at full 32-bit color (16-bit on UXGA) 3. O/Is shall use touch screen as the operator's input device. O/Is must also support Microsoft compatible USB keyboard for alphanumeric entry functions. Operator control actions through the touchscreen must support the following features: Positive, two-step control or critical control operations and immediate one-touch control for non-critical operations such as page change or mode change. Field-replaceable touch screen Analog resistive 4-wire resolution. Eaton / Cutler-Hammer Operator Interface (O/I) Communications e. f. g. O/Is shall offer the following communications choices: Built-in PLC drivers for both serial and Ethernet communications protocols Simultaneous communication to multiple PLCs and PLC brands Optional High-speed interfaces through either PCMCIA or PCI bus. Network down/uploading of configurations, drivers and runtime firmware Dual serial ports. 10/100Base-T Ethernet communications Built-in OPC Server connectivity Eaton / Cutler-Hammer Operator Interface (O/I) Software and Configuration O/Is shall offer the following tools for creating and changing screen content: Advanced Windows-based configuration software Common look and feel across product line * Note to Spe Writer Select one /06
6 e. f. g. h. i. j. k. l. m. n. 2. e. ELECTRICAL CONTROL DEVICES Single configuration software for all products Fill-in-the-blank configuration Automatic conversion of existing configurations Context-sensitive help screens Pre-configured templates Indicator 2. Button 3. Readout 4. Bar 5. Display 6. Clock 7. Multiline Text 8. LED Indicator 9. Slales 10. Touch Areas 1 Images support for BMP, JPEG, WMF and EMF formats 12. Images support for Ethernet based Cognex and DVT vision system images. Document Viewer Window for display of PDF, JPEG, TXT, and HTML file types Windows Media Player support for MPG and MPEG file types Alarm and Event window Full library of Boolean logic and math operators Direct addressing of PLC data and OPC tags Ethernet transfers All documentation in HTML Help format O/Is shall provide the following graphical capabilities: Bitmap graphics (.bmp, jpg,.wmf and.emf formats) Object-based pixel graphics Dynamic object-based graphics Blinking colors for up to 16 different blink states and up to 3 different blink rates. Nondestructive updates 3. Operator Interface shall be Eaton / Cutler-Hammer type PanelMate epro PS or preapproved equal /06
SECTION ( ) LIGHTING CONTROL PANELBOARD
(26 24 16.02) LIGHTING CONTROL PANELBOARD PART 1 GENERAL 1.01 SCOPE A. The Contractor shall furnish and install Lighting Control Panelboards as specified and as shown on the contract drawings. B. The Lighting
More information1510 MOTOR CONTROLLERS
SECTION 262913- MOTOR CONTROLLERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of contract, including general and supplementary conditions and Division 1 specification section,
More informationSmartWire-DT In panel and on machine wiring solutions. Revolutionizing in-panel control wiring and on-machine connection of sensors and actuators
SmartWire-DT In panel and on machine wiring solutions Revolutionizing in-panel control wiring and on-machine connection of sensors and actuators SmartWire-DT Changing the way panels... Reduce cost throughout
More informationSECTION SOLID-STATE REDUCED VOLTAGE STARTERS
SECTION 26 29 13.16 PART 1 - GENERAL 1.1 THE REQUIREMENT A. General: The CONTRACTOR shall provide solid-state reduced voltage motor starters, complete and operable, in accordance with the Contract Documents.
More information.2 Section General Commissioning (Cx) Requirements. .3 Section Common Work Requirements - Electrical
Issued for Review Section 26 28 16.01 Air Circuit Breakers Page 1 of 7 PART 1 GENERAL 1.1 GENERAL.1 This specification serves to define requirements for a replacement of low voltage circuit breaker of
More informationSECTION 16496E ATS MOLDED CASE WITH ATC 900 CONTROLLER
ATS MOLDED CASE WITH ATC 900 CONTROLLER PART 1 GENERAL 01 02 03 04 SCOPE Furnish and install the low voltage automatic transfer switches having the ratings, features/accessories and enclosures as specified
More informationJanuary 2001 Vol. 2, Ref. No. [0880] 10250T/E34 Series, Assembled Devices Momentary Pushbutton Units
47 2in Cutler-Hammer Pushbuttons and Indicating Lights 30.5 mm Class I Division 2 Watertight/Oiltight Vol. 2, Ref. No. [0880] / Series, Assembled Devices Momentary Pushbutton Units Flush Button 706B Extended
More informationCS7 Industrial Control Relays
CS7 Industrial Control Relays Reliable, general purpose relays for heavy duty applications The base four pole CS7 relay can be expanded up to twelve poles with the addition of front and side mount auxiliaries
More informationControl Transformers Control transformers
Control Transformers It is often desirable to operate the control circuit at a lower voltage than the power circuit. Control transformers are used to step a voltage down to a lower level. Siemens Class
More informationSECTION SWITCHBOARDS
SECTION 26 24 13 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Switchboards 2. Commercial Metering Switchboards 3. Non-Utility Power Meters (Microprocessor-Based Metering Equipment) PART 2 - PRODUCTS
More informationTECHNICAL SPECIFICATION FOR MEDIUM VOLTAGE METAL-CLAD SWITCHGEAR (15 KV)
1.1 DESCRIPTIONS OF WORK A. The Bidder shall furnish and install the equipment as specified herein and as shown on the contract drawings. B. The switchgear and circuit breakers shall be manufactured by
More information29 $ Manual Motor Starters FREESHIPPING. MOTOR CONTROLS 25. Features: MMS-32H Frame. MMS-63H Frame.
www.factorymation.com/motorcontrols MOTOR CONTROLS 25 Manual Motor Starters High interrupt capacity Din rail and surface mounting Lockable handle (OFF position) IP20 finger safe terminals Class 10 thermal
More informationWMS SUPPLEMENTARY PROTECTORS
WMS Supplementary Protectors Overview WMS SUPPLEMENTARY PROTECTORS Product Specification The WMS Supplementary Protector is a dual-rated product for both AC and DC supplies, in accordance with UL 1077
More informationMetering Devices, Protective Relays, Software and Connectivity. Pre-Wired Control Power, Voltage and CT Inputs
.3 Features and Benefits Saves installation time and cost One part number to order; no need to worry that any part has been left out Pick the meter or meters you need as it is designed to fit various Eaton
More informationepro Canvas epro Canvas TM (Catalog No. CANVAS)
epro Canvas TM (Catalog No. CANVAS) Product Focus Configuration Software for PanelMate epro ES/PS Easy to Use Collaborative Capabilities Innovation with Migration SM epro Canvas Creation Creative Expression
More informationCrane Control Contactors and Relays
October 8 DC Relays Type KC Heavy-Duty Mill 75 Contact Conversion The fully visible contacts have NEMA ICS--5 heavy-duty interrupting ratings and are easily converted in the field using just a screwdriver
More informationOperator Interface Business
Electrical Operator Interface Business 811 Green Crest Dr. Columbus, OH 43081 Tel: 614-882-3282 Fax: 614-899-5390 Toll free: 1-800-809-2772 COMMERCIAL TOPICS Operator Interface Business Frequently Asked
More informationSmartWire-DT In-panel and on-machine wiring solutions. Revolutionizing in-panel control wiring and on-machine connection of sensors and actuators
In-panel and on-machine wiring solutions Revolutionizing in-panel control wiring and on-machine connection of sensors and actuators Changing the way panels... Reduce cost throughout the value chain. T
More informationSECTION MOTOR CONTROL CENTERS
MOTOR CONTROL CENTERS PART 1 GENERAL 1.01 SCOPE A. The Contractor shall furnish and install the motor control centers as specified herein and as shown on the contract drawings. 1.02 RELATED SECTIONS A.
More informationE1 Plus Electronic Overload Relay
ROCKWELL AUTOMATION PROCUREMENT SPECIFICATION PROCUREMENT SPECIFICATION E1 Plus NOTICE: The specification guidelines in this document are intended to aid in the specification of products. Specific installations
More information*REQUIRED* 169 Main Street 700 Plaza Middlesex Middletown, CT T: F:
ADDENDUM COVER & RECEIPT CONFIRMATION SHEET 169 Main Street 700 Plaza Middlesex Middletown, CT 06457 T: 860-343-8297 F: 860-343-9504 www.wright-pierce.com DATE: 9/6/16 ADDENDUM CONSISTS OF (Including this
More informationControls Enclosed Non-Combination Starters - PESW Series
NEMA 4/4X Non Metallic Enclosure Product Features WEG offers non-reversing and non-combination NEMA-4X magnetic starter up to 75HP at 460V. Featuring components that meet IEC design standards and UL horsepower
More informationCS7 Industrial Control Relays
CS7 Industrial Control Relays Reliable, general purpose relays for heavy duty applications The base four pole CS7 relay can be expanded up to twelve poles with the addition of front and side mount auxiliaries
More informationPanelMate Power Series 1700 Frequently Asked Questions
PanelMate Power Series 1700 Frequently Asked Questions 1. What are the new features and additions to the PanelMate Power Series 1700 compared to the PanelMate Power Series 1500 and to the PanelMate Power
More informationThe City of Winnipeg Dry Type Transformers up to 600 V Primary Section Bid Opportunity No Page 1 of 2
The City of Winnipeg Dry Type Transformers up to 600 V Primary Section 26121601 Bid Opportunity No. 1196-2014 Page 1 of 2 Part 1 General 1.1 RELATED REQUIREMENTS.1 Section 26 05 01 - Common Work Results
More informationLOW VOLTAGE BYPASS/ISOLATION BREAKER BASED AUTOMATIC TRANSFER SWITCHES SECTION 16496D
(26 36 23.04) LOW VOLTAGE BYPASS/ISOLATION BREAKER BASED AUTOMATIC TRANSFER SWITCHES PART 1 GENERAL 1.01 SCOPE A. The Contractor shall furnish and install the low voltage automatic transfer switch and
More information3.3. Control Relays and Timers
. Contents Description easy500/700/800..... easy802/806 with SmartWire-DT.................... easyrelay and MFD Expansion Modules..... MFD-Titan Multi-Function s......... easyrelay Communication Modules........
More informationCS8 Industrial Control Relays
CS8 Industrial Control Relays Despite increasing complexity, control systems and installations must become increasingly compact. And the CS8 Miniature Relay System packs maximum performance into minimum
More information22mm Non Illuminated Metal Operators
22mm 22mm Non Illuminated Metal Operators Altech Corp. can provide other push button and actuator options. If your requirement calls for a 22 mm operator which is not shown, please do not hesitate to call.
More informationMini Contactors & Overloads
108 Mini s & Overloads GMC-12M Surface or DIN rail mountable UL508 compliant 1/ to 7-1/ 50/60Hz AC and DC versions available Direct-mounting overloads RoHS compliant Auxiliary contacts standard (1 N.0.)
More informationEXPRESS SETUP. PanelMate 1700 Series PanelMate Power Pro. Cutler-Hammer
EXPRESS SETUP PanelMate 1700 Series PanelMate Power Pro Cutler-Hammer Installation Unpacking Carefully remove all equipment from the packing cartons and inspect all parts for damage in shipment. Check
More informationOVERLOAD RELAYS POWER & ACTUATION PROVEN. series
POWER & ACTUATION OVERLOAD RELAYS series Need reliable, accurate overload and phase-loss protection for your motors? c3controls Series Bimetallic Overload Relays provide unmatched protection and can be
More information3a. IEM Indoor Metal Clad Medium Voltage Switchgear 25KV a. Section INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std.
3a. IEM Indoor Metal Clad Medium Voltage Switchgear 25KV 16346-1 3a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std. Relays) Part 1 General 1.1 CONDITIONS AND REQUIREMENTS: A. Refer to
More information78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
More information920 Remote Control (RC) Switches
920 Remote Control (RC) Switches ASCO is the global leader in power switching and controls ASCO 920 PRODUCT SPECIFICATIONS SWITCH ONLY (PANELBOARD MOUNTING) 1,2,3 () DIMENSIONS, IN.(MM) WIDTH HEIGHT DEPTH
More informationMULTI 9 System Catalog UL Recognized NC100H Supplementary Protectors
B Curve NC100H Supplementary Protectors Rating 1P 2P 3P 4P 80 MG27164 MG27175 MG27186 MG27197 MULTI 9 System Catalog UL Recognized NC100H Supplementary Protectors C Curve NC100H Supplementary Protectors
More informationIndustrial Monitors and Touch Monitors
Industrial Monitors and Touch Monitors LCD Monitor Specifications Heavy Light Part Numbers -TS Price Screen Specifications (Active Matrix) Display Type TFT
More informationJockey Pump Controllers
BR081001EN Microprocessor Based with Color Touchscreen Product Description ACROSS THE LINE Controllers operate across-the-line. Full voltage is applied to the motor for starting by the use of a single
More informationUL 489 DIN rail branch circuit breakers
UL 9 DI rail branch circuit breakers FAZ-A circuit breakers Product Overview UL 9 DI rail branch circuit breakers FAZ-A circuit breakers PRODUCT OVERVIEW Optimum and efficient protection Optimum product
More informationContacts Contact Arrangement. 8-Pole Relay. 12-Pole Relay
Bulletin -P Heavy-Duty Industrial s Product Selection DC-Operated s Rail Mount DIN Rail Mount Cat. No. Cat. No. -Pole DC-P DC-PD DC-P DC-PD -Pole DC-P DC-PD DC-P DC-PD -Pole DC-P DC-PD DC-P DC-PD DC Coil
More informationExercise 1-4. Contactors and Control Relays EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION
Exercise 1-4 Contactors and Control Relays EXERCISE OBJECTIVE Identify the characteristics of control relays and contactors. DISCUSSION OUTLINE The Discussion of this exercise covers the following points:
More informationSECTION SURGE PROTECTION DEVICES. A. Section includes Surge Protection Devices for low-voltage power, control, and communication equipment.
SECTION 26 43 00 SURGE PROTECTION DEVICES PART 1 - GENERAL 1.1 SUMMARY A. Section includes Surge Protection Devices for low-voltage power, control, and communication equipment. 1.2 DEFINITIONS A. ATS:
More informationJockey Pump Controllers
BR081001EN Microprocessor Based with Color Touchscreen Product Description ACROSS THE LINE Controllers operate across-the-line. Full voltage is applied to the motor for starting by the use of a single
More informationSECTION PROGRAMMABLE LOGIC CONTROLLER (PLC)
SECTION 13450 PROGRAMMABLE LOGIC CONTROLLER (PLC) PART 1 GENERAL 1.01 DESCRIPTION A. This section covers the requirements for the Programmable Logic Controller (PLC) and PLC spare parts and tools. The
More informationPowerFlex 400 AC Drive Guide Specification
PowerFlex 400 AC Drive Guide Specification Adjustable Frequency Drives with Bypass 3.0 50HP @ 208V AC 3.0 350HP @ 480V AC PART 1 GENERAL 1.01 Quality Assurance A. The manufacturer shall have minimum 5
More informationSECTION LOW-VOLTAGE VARIABLE FREQUENCY DRIVES
SECTION 26 29 23 LOW-VOLTAGE VARIABLE FREQUENCY DRIVES PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. Contractor shall provide all labor, materials, equipment, services, and incidentals as shown, specified,
More informationAllen-Bradley Drives
Overview/Product Selection Bulletin IEC Industrial Safety Relay Positively Guided/Mechanically Linked as Per IEC 947-5-1 Annex L Third Party Certification By SUVA Red Cover and Mechanically Linked Contact
More informationLiebert AccuVar (ACV Series) Surge Protective Device (SPD) (With Noise Filtering) GUIDE SPECIFICATIONS for a Parallel Surge Suppression System
Liebert AccuVar (ACV Series) Surge Protective Device (SPD) (With Noise Filtering) GUIDE SPECIFICATIONS for a Parallel Surge Suppression System Part 1 General 1.01 Summary A. These specifications describe
More informationFree Standing Emergency Department DGL Project No SECTION OVERCURRENT PROTECTIVE DEVICE COORDINATION STUDY PART 1 - GENERAL
SECTION 26 05 73 1.1 SUMMARY OVERCURRENT PROTECTIVE DEVICE COORDINATION STUDY PART 1 - GENERAL A. This Section includes the following: 1. Requirements for computer-based, fault-current and overcurrent
More informationE-Series General Specifications
-Series General Specifications Ideally suited for higher amperage applications. Available with front and back mounting, screw terminals, stud terminals and heavy duty box wire connectors for solid wire
More informationEXPRESS SETUP. PanelMate 1700 Series PanelMate Power Pro. Cutler-Hammer
EXPRESS SETUP PanelMate 1700 Series PanelMate Power Pro Cutler-Hammer Installation Unpacking Carefully remove all equipment from the packing cartons and inspect all parts for damage in shipment. Check
More informationLevel-Lance Model 5400A
Sales Manual Section 100 PRODUCT SPECIFICATION 5400A GENERAL DESCRIPTION The ROBERTSHAW Level-Lance Model 5400A is a microprocessor based, multi-point On-Off capacitance type level detection system. Utilizing
More informationFTA750 LIMITED SERVICE FIRE PUMP CONTROLLERS STANDARD SUBMITTAL PACKAGE
FTA750 LIMITED SERVICE FIRE PUMP CONTROLLERS STANDARD SUBMITTAL PACKAGE SBP750-51(B) FTA750 Full Voltage Starting Limited Service Electric Fire Pump Controllers Product Description Description Firetrol
More informationLAUREL ELECTRONICS, INC.
LAUREL ELECTRONICS, INC. Laureate RTD Temperature Panel Meter / Controller Features Factory calibrated for 100Ω platinum, 10Ω copper & 120Ω nickel RTDs 2, 3 or 4-wire connection with lead resistance compensation
More information9926 Series Branch Rated Circuit Breakers AC Version
Branch Rated AC Version Hydraulic Magnetic Single pole and double pole versions 20/240 VAC, 50/60 Hz Up to 25A Just 3 mm wide Mounts on 35mm DIN-rail UL 489 listed, CSA C22.2 No. 5-02, CE VDE Ordering
More informationSECTION MEDIUM VOLTAGE MOTOR CONTROLLERS LIMITAMP WITH POWER MANAGEMENT. A. Medium Voltage Motor Controllers with Power Management
PART 1 GENERAL A. The requirements of the Contract, Division 1, and Division 16 apply to work in this Section. 1.01 SECTION INCLUDES A. Medium Voltage Motor Controllers with Power Management 1.02 RELATED
More informationPhotoelectric Sensors 20 Series
PG.05E.22.T.E Extremely Rugged Construction, Long Sensing Ranges and High Current Switching Contents Overview........................ Model Selection, Sensors......... 2 Model Selection, Output Devices..................
More informationEnclosed Non-Reversing Combination Controller, AC Operation - Type 1/12K/IP66 ➏➐. Non-Metallic Type 1/12K/IP66 Enclosure (KS7-C0C4R)
KWIKstarter/CX7 CX7 Non-Reversing Combination Controller, AC Enclosed Non-Reversing Combination Controller, AC Operation - Type 1/12K/IP66 ➏➐ Catalog Number ➍➏➑➒ ~ ~ ~ ~ 0.10 0.16 2.1 1 CX7-9-10- -AS0.16A-A10-PG
More informationSECTION 16482A MOTOR CONTROL CENTERS LOW VOLTAGE (FREEDOM)
PART 1 GENERAL 1.01 1.02 1.03 1.04 SCOPE A. The Contractor shall furnish and install the motor control centers as specified herein and as shown on the contract drawings. RELATED SECTIONS A. Section 16475
More informationD64RP18 INSTRUCTION MANUAL N.O. N.C V AC/DC TEST/ RESET
D64RP18 INSTRUCTION MANUAL N.O. N.O. CONTROL CIRCUIT N.C. N.C. CONTROL CIRCUIT 24-240V AC/DC L POWER SUPPLY N TEST/ RESET TEST/RESET PUSHBUTTON CT Wires EXTERNAL CORE BALANCE CT RATINGS PER IEC 60755 CT
More informationSECTION PANELBOARDS
SECTION 16450 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes requirements for panelboards providing fault interrupting capability and overcurrent protective devices. 1.02 REFERENCE STANDARDS A.
More informationVibration Switches viib
Vibration Switches technivib -- Z.I de Pringy -- 531 route des vernes 74 370 PRINGY France Tél :: 0033 4 50 01 23 20. Fax :: 0033 4 50 01 57 81 e.mail :: info@technivib.com Website : : www.technivib.com
More informationRevolutionizing control wiring
SmartWire-DT Panel Wiring Solutions Revolutionizing control wiring 797-6925 Fax: (215) 221-1201 www.royalelectric.com SmartWire-DT Changing the way panels are wired. Reduce cost throughout the value chain.
More informationBulletin 700-P, 700DC-P Industrial Relays
Bulletin 700-P, 700DC-P Industrial Relays Adder Decks Description No. of N.O. Contacts Continuous Carrying Current [A] Arrangement Second Deck (0-pole) 0 700-PB00 Second Deck 700-PB40 Second Deck (4-pole)
More informationCITY OF BOISE SPECIFICATIONS FOR LIGHT EMITTING DIODE (LED) STREET LIGHTING Effective 1 Feb, 2018
CITY OF BOISE SPECIFICATIONS FOR LIGHT EMITTING DIODE (LED) STREET LIGHTING Effective 1 Feb, 2018 1. LIGHT EMITTING DIODE (LED) LUMINAIRES FOR ROADWAY TYPE 3 ILLUMINATION A. Testing and Compliance I Manufacturer
More informationSECTION ENCLOSED SWITCHES AND CIRCUIT BREAKERS
SECTION 262816 - ENCLOSED SWITCHES AND CIRCUIT BREAKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationMULTI 9 System Catalog UL Recognized C60N Supplementary Protectors
UL Recognized C60N Supplementary Protectors B Curve C60N Supplementary Protectors 1 MG24110 MG24125 MG24140 MG24155 15 MG17406 MG17436 MG17461 1.2 MG17402 MG17432 16 MG24118 MG24133 MG24148 MG24163 1.5
More informationSECTION DISCONNECT SWITCHES
SECTION 16440 DISCONNECT SWITCHES PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification
More informationAllen-Bradley Bulletin 100 Contactors
Allen-Bradley Bulletin 100 Contactors An integrated portfolio of IEC Contactors that save panel-space and energy Features and Benefits: Direct-on-line and reversing contactors Built-in surge suppression
More informationPS-4100 POWER SUPPLY MANUAL
PS-4100 POWER SUPPLY MANUAL Manual Part Number 180-0573 December 7, 2006 TABLE OF CONTENTS TITLE PAGE Table of Contents... 2 List Of Figures... 3 1. Introduction... 4 1.0. General... 4 1.1. Features...
More information(1986; Rev. 1989) Molded Case Circuit Breakers and Molded Case Switches. (1985; Rev. 1988) Enclosures for Electrical Equipment (1000 Volts Maximum)
Section 16306 50/60-HERTZ (HZ) SOLID STATE FREQUENCY CONVERTER Index PART 1 GENERAL PART 2 PRODUCTS 1.1 References 2.1 Frequency Converters 1.2 Factory Tests 2.2 Conduit and Fittings 1.3 Submittals 2.3
More informationCertification according to CE. C-more Touchpanels:
The new Generation of Touch Panels with ambitious image presentation and integrated operating function With the C-more series, featuring STN and TFT touch screens, AutomationDirect now provides the best
More informationV REG.-Nr. 3919, Z E214024
General Purpose Relays SCHRACK Miniature Power PCB Relay MSR 1 pole 8 / 10 A, 1CO or 1NO contact High inrush currents with AgSnO contacts (TV4 = 65 A) 4 kv/8 mm coil-contact Reinforced insulation (protection
More informationAtlas Industrial Flat Panel PC Monitors
Touch Screen is still active while display power is off DISPLAY POWER R Atlas Industrial Flat Panel PC Monitors A1900/A1900T The Atlas A1900/A1900T is a high performance 19" color TFT flat panel monitor
More informationPERFORMANCE SPECIFICATION
INCH-POUND MIL-PRF-6106/13F 17 November 2011 SUPERSEDING MIL-PRF-6106/13E 10 November 2000 PERFORMANCE SPECIFICATION RELAY, ELECTROMAGNETIC, 25 AMPERE, 3PST, NO, WITH 2 AMPERE 1PDT AUXILIARY CONTACTS,
More informationASCO 920 Remote Control (RC) Switches
Maximum reliability and excellent value ASCO 920 Remote Control (RC) Switches ASCO 920 Remote Control Switch in Type Enclosure The ASCO 920 is designed as a feeder disconnect switch for load capacities
More informationeasyrelay Control Relays MFD-Titan Multi-Function Display
easyrelay Control Relays MFD-Titan Multi-Function Display The easy500/easy700/800 control relays as well as the MFD-Titan multi-function display come with a full range of technical resources to implement
More informationN2S and N2SC Series Control Stations
NEMA, 4X, 7BCD (Div. 2), 2 Applications: N2S and N2SC pushbutton stations, selector switches and pilot lights are suitable for use: In Class I, Groups B, C, D; Division 2 hazardous areas where flammable
More informationTime Delay Values (E-Series)
Time Delay Values (ESeries) AC Instantaneous 00 0 INSTANTANEOUS CURVE NO. 20 00 0 DC D.C. INSTANTANEOUS CURVE NO. 0 0. 0..0.0.00 200 300 400 500 700 800 900 0 200.00 200 300 400 500 700 800 900 0 200 Short
More informationSafety Monitoring Relays
Safety Monitoring Relays Contents Selection Guide I-2 Safety Monitoring Relays G9SA I-6 SR101A I-12 SR103AM I-13 SR104P I-17 SR105E I-17 SR106ED I-21 SR108AD & SR109AD I-18 SR120MP I-21 SR125SMS45 I-22
More informationFree-Stand Universal-Cutout Disconnects Type 12 Modular Free-Stand Disconnects and Accessories
763.422.2600 SPEC-00252 N763.422.2211 DISCONNECT FREE-STAND UNIVERSAL-CUTOUT DISCONNECTS TYPE 12 MODULAR FREE-STAND DISCONNECTS AND ACCESSORIES Free-Stand Universal-Cutout Disconnects Type 12 Modular Free-Stand
More informationOpenHMI IWS Operator Interface Products
OpenHMI IWS Operator Interface Products FEATURES Microsoft Windows -based development and runtime software 7.7 to 15 color flat panel display Operator input through a combination of integrated touchscreen,
More informationEXPRESS SETUP. PanelMate 3000 Series PanelMate Power Pro. Cutler-Hammer
EXPRESS SETUP PanelMate 3000 Series PanelMate Power Pro Cutler-Hammer Installation Unpacking Carefully remove all equipment from the packing cartons and inspect all parts for damage in shipment. Check
More informationProducts :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers
Products :: Circuit Protection :: Hydraulic/Magnetic Circuit Breakers Hydraulic/Magnetic Circuit Breaker B-Series B-Series PDF elibrary The B-Series hydraulic/magnetic circuit breakers are compact and
More informationStellar Instruments. SC1 Controller & Display System. General User s Manual. Copyright 2013 Stellar Instruments 1
Stellar Instruments SC1 Controller & Display System General User s Manual Copyright 2013 Stellar Instruments 1 Contents Section 1 General... 3 Section 2 Base Unit A (Multi-Event Programmable Timer)...
More informationreliable company...caterpillar
The markets most reliable technology... from the industryʼs most reliable company...caterpillar Caterpillar switchgear with PowerLynx technology has been designed to integrate hand-inglove with Caterpillar
More informationY800 Plus Frequency, Rate & Period Meter With dual, independently field-scalable channels
Y800 Plus Frequency, Rate & Period Meter With dual, independently field-scalable channels Description Features Frequencies from 0.005 Hz to 1 MHz 6-digit resolution at update rates up to 25/s Selectable
More informationElectric actuator for quarter-turn valves. For output torques to 17,700 lb. in.
Electric actuator for quarter-turn valves. For output torques to 17,700 lb. in. Features Standard Standard actuator accepts 100 to 240 Volt DC or AC single phase input, 50 and 60 Hz. Three phase is optional.
More informationNF44E-.. / NFZ44E-.. Contactor Relays AC / DC Operated - with Screw Terminals
Technical Datasheet 1SBC1010D0201 28/03/11 NFE-.. / NFZE-.. Contactor Relays AC / DC Operated - with Screw Terminals NF(Z) contactor relays are used for switching auxiliary and control circuits. NF(Z)
More informationMiniature Circuit Breakers and Supplementary Protectors. Contents
. Optimum and Efficient Protection for Every Application Product Overview Features Optimum product quality, tested reliability and safety stand for best protection of personnel, installations and plant.
More informationEaton s Innovative Technology Surge Suppression Guideform Specification Low Exposure DIVISION 16 SECTION 16289
PART 1 - GENERAL DIVISION 16 SECTION 16289 TRANSIENT VOLTAGE SURGE SUPPRESSION (TVSS) 1.1 RELATED DOCUMENTS General: Drawings and general provisions of the Contract, including General and Supplementary
More informationIntroduction Circuit Protection
Introduction Circuit Protection Weidmuller s DIN-rail mounted circuit breakers are available for use in applications where circuit protection must be able to distinguish between circuit overloads and short
More informationMG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD
United States MG24434 Supplementary Protector SUPPLEMENTARY PROTECTOR, 240VAC, 16A, CIRCUIT BREAKER TYPE: STANDARD Product Information Features and Specifications For Use With: OEM Panels Approvals: UL
More informationSED2 Variable Frequency Drives Conventional Bypass (C-Bypass) Options
Submittal Sheet SED2 Variable Frequency Drives Conventional Bypass (C-Bypass) Options Description The Bypass Options are companion packages for the family of SED2 Variable Frequency Drives. For information
More informationEaton s Innovative Technology Surge Suppression Guideform Specification High Exposure DIVISION 16 SECTION 16289
PART 1 - GENERAL DIVISION 16 SECTION 16289 TRANSIENT VOLTAGE SURGE SUPPRESSION (TVSS) 1 RELATED DOCUMENTS General: Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationCertification according to CE. C-more Touchpanels:
The new Generation of Touch Panels with ambitious image presentation and integrated operating function With the C-more series, featuring STN and TFT touch screens, AutomationDirect now provides the best
More informationSECTION DISTRIBUTION SWITCHBOARDS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 26 24 11 This section specifies the furnishing, installation, and connection of the distribution switchboards. 1.2 RELATED WORK: A. Section 13 05 41, SEISMIC RESTRAINT
More informationGE Multilin 350 Feeder Protection Relay Specifications
GE Multilin 350 Feeder Protection Relay Specifications The feeder protection relay shall provide primary protection of medium voltage distribution feeders. The relay shall be equipped with the following
More informationTECHNICAL BROCHURE BCPNEMAST R0. NEMA Rated Three-Phase Starters BY EATON
TECHNICAL BROCHURE BCPNEMAST R0 NEMA Rated Three-Phase Starters BY EATON STANDARD FEATURES Series ECN - NEMA Rated Three-Phase Starters Adjustable Electronic Overloads C440 Series - Adjustable Class, Bi-metallic,
More informationMODEL SW6000 & SM6100 CENELEC INSTRUCTIONS
MODEL SW6000 & SM6100 CENELEC INSTRUCTIONS Installation Manual 1180 METRIX Experience Value 8824 Fallbrook Dr. Houston, TX 77064, USA Tel: 1-281-940-1802 After Hours Technical Assistance: 1-713-702-8805
More information