Overview of the CWDM units cont.

Size: px
Start display at page:

Download "Overview of the CWDM units cont."

Transcription

1

2 DATA SHEET DB4133-E Issue F Page 6 of 8 Overview of the CWDM units cont. 8 channel CWDM - lower band FPM76/8LCWDM 8-channel CWDM, FP65/8LCWDM 8 channel CWDM, nm FPM76/8LCWDM FP65/8LCWDM 8 channel CWDM FPM76/8CWDM 8 channel CWDM, FP65/8CWDM 8 channel CWDM, FP65/2x8CWDM 2x8-channel CWDM, FP65/4x8CWDM 4x8-channel CWDM, nm FPM76/8CWDM FP65/8CWDM 8 channel CWDM FPM76/8/1CWDM 8+1-channel CWDM, FPM76/8/1CWDM-M 8+1 channel CWDM, Monitor FP65/8/1CWDM 8+1-channel CWDM, FP65/8/1CWDM-M 8+1 channel CWDM, Monitor FP65/2x8/1CWDM 2x8+1-channel CWDM, FP65/4x8/1CWDM 4x8+1-channel CWDM, nm FPM76/8/1CWDM FP65/4x8/1CWDM

3 DATA SHEET DB4133-E Issue F Page 7 of 8 Article numbers 1U Panel: 4 channel: FP65/4LCWDM-Sxxx FP65/2x4LCWDM-Sxxx FP65/4CWDM-Sxxx FP65/2x4CWDM-Sxxx FP65/4/1CWDM-Sxxx FP65/2x4/1CWDM-Sxxx FP65/4U/1CWDM-Sxxx FP65/2x4U/1CWDM-Sxxx 8 channel: FP65/8LCWDM-Sxxx FP65/8CWDM-Sxxx FP65/2x8CWDM-SLC FP65/4x8CWDM-SLC FP65/8/1CWDM-Sxxx FP65/2x8/1CWDM-SLC FP65/4x8/1CWDM-SLC FP65/8/1CWDM-Sxxx-M 18 channel: FP65/18CWDM-Sxxx Single fibre: FP65/4/8CWDM-Sxxx-A FP65/4/8CWDM-Sxxx-B FP65/9/18CWDM-Sxxx-A FP65/9/18CWDM-Sxxx-B 4 channel CWDM, SM, , xxx 2 x 4 channel CWDM, SM, , xxx 4 channel CWDM, SM, , xxx 2 x 4 channel CWDM, SM, , xxx 4+1 channel CWDM, SM, /1310, xxx 2 x 4+1 channel CWDM, SM, /1310, xxx 4+1 channel CWDM, SM, 31/47/49/59/61, xxx 2 x 4+1 channel CWDM, SM, 31/47/49/59/61, xxx 8 channel CWDM, SM, , xxx 8 channel CWDM, SM, , xxx 2x8-channel CWDM, SM, ,LC 4x8-channel CWDM, SM, ,LC 8+1 channel CWDM, SM, /1310, xxx 2 x 8+1 channel CWDM, SM, /1310, LC 4 x 8+1 channel CWDM, SM, /1310, LC 8+1 channel CWDM, SM, / Monitor port, xxx 18 channel CWDM, SM, , xxx 4 channel CWDM, SM, 1-fibre, xxx, A side 4 channel CWDM, SM, 1-fibre, xxx, B side 9 channel CWDM, SM, 1-fibre, xxx, A side 9 channel CWDM, SM, 1-fibre, xxx, B side xxx = connector type in front of the panel: SC = SC/PC SCA = SC/APC LC = LC/PC LCA = LC/APC

4 DATA SHEET DB4133-E Issue F Page 8 of 8 Modules: 4 channel: FPM76/4LCWDM-Sxxx Module, 4 channel CWDM, SM, , xxx 1-slot FPM76/4CWDM-Sxxx Module, 4 channel CWDM, SM, , xxx 1-slot FPM76/4/1CWDM-Sxxx Module, 4+1 channel CWDM, SM, /1310, xxx 1-slot FPM76/4U/1CWDM-Sxxx Module, 4+1 channel CWDM, SM,47/49/59/61/31, xxx 1-slot 8 channel: FPM76/8LCWDM-Sxxx Module, 8-channel CWDM, SM, , xxx 1-slot FPM76/8CWDM-Sxxx Module, 8 channel CWDM, SM, , xxx 1-slot FPM76/8/1CWDM-Sxxx Module, 8+1 channel CWDM, SM, /1310, xxx 1-slot FPM76/8/1CWDM-Sxxx-M Module, 8+1 channel CWDM, Monitor port, xxx 1-slot 18 channel: FPM76/18CWDM-Sxxx Module, 18 channel CWDM, SM, , xxx 2-slot Single fibre: FPM76/4/8CWDM-Sxxx-A Module, 4 channel CWDM, SM, 1-fibre, xxx, A side 1-slot FPM76/4/8CWDM-Sxxx-B Module, 4 channel CWDM, SM, 1-fibre, xxx, B side 1-slot FPM76/9/18CWDM-Sxxx-A Module, 9 channel CWDM, SM, 1-fibre, xxx, A side 2-slot FPM76/9/18CWDM-Sxxx-B Module, 9 channel CWDM, SM, 1-fibre, xxx, B side 2-slot xxx = connector type in front of the module: LC = LC/PC LCA = LC/APC Other combinations of both the 1U panel and the modules may be available on request. Accessories FP70301 Cable guide, 0,5U FP70360 Cable guide, 1U FP70325 Storage unit, 2U 02/NCD513 Cable guide II FP70333 Cover, 3U FP70334 Cover, 4U Only for modules: FPM76100 FPM76105 FPM76106 FPM76190 Panel, modular, 12-slot, 3U Panel, modular, 3-slot, 1U Lid, 1U panel Blanking plate, 1-slot

5 DWDM DATA SHEET DB4134-E Issue F Page 1 of 6 Passive optical multiplexer/de-multiplexer. Increases the capacity of existing networks by transferring several wavelengths on the same fibre. Independent of protocol and bitrate. Delivered in several combinations from 8 to 40-channel DWDM. Description The DWDM is delivered as 1U panel or as modules for 1U/3U modular panel. They are based on reliable passive technology and are delivered with SC or LC interface with PC or APC polished connectors. Modules The modules are inserted in a 1U or 3U panel (se separate data sheet for details). The 3U panel may be populated with up to 12 modules, the 1U panel with up to 3 modules, and they may be placed in any order in the panel. This ensures a flexible and modular system with simple access to adding modules at a later stage and also offers high density with the panel fully equipped. Each module is complete with components for two-way communication, terminated in LC connectors at the front. The panel is intended for mounting in 19 racks. 1U panel This is a panel for mounting in 19 or metric racks. The panel may offer high density, but do not offer any good possibilities for later expansion within the same panel. Each panel is complete with components for two-way communication, terminated in SC or LC connectors at the front. 3U modular panel with modules The panel is ready to be installed in 19 racks. By turning the mounting bracket it may also be 1U panel with 8 channels installed in a metric rack. When the panel is to be placed in a 19" rack the bracket may be moved about 2 cm forward if needed. In this way the panel moves 2 cm further back in the rack. This gives more room in front of the panel, which may be beneficial for instance if the distance to the rack door is short. System description Passive DWDM panels/modules are a reliable and reasonable method for transferring several wavelengths/signals over the same fibre (wavelength multiplexing). In this way you may increase the capacity of existing fibre-cable significantly. Combined with OADM you may add or drop wavelengths on the way between the end points. A big advantage of using passive wavelength multiplexing is also that the method is protocol and bitrate independent. A complete system with components for two-way communication (multiplexer and de-multiplexer) in both ends are made with two panels/ modules.

6 DATA SHEET DB4134-E Issue F Page 2 of 6 The DWDM channels are defined by ITU and are based on frequency (THz) - not wavelength. The table below show the connection between channel number, frequency and wavelength for the most common channels in a system with 100GHz channel spacing. The table mat be expanded both up and down in frequency, in addition the DWDM units may also be delivered with 50 and 200 GHz spacing. By using 50GHz spacing, 2 40-channels DWDM s and an interleaver you may have 80 channels in a system. Channel Frequency (THz) Wavelength (nm) Channel Frequency (THz) Wavelength (nm) Channel Frequency (THz) Wavelength (nm) , , , , , , , , , , , , , , ,77 The standard way of using the these units are in a 2-fibre solution where 1 fibre is used in each direction as shown in the illustration below. Some types may also be delivered with monitor port (as shown with dashed lines in the figure). Here 2% of the line signal is tapped of to enable monitoring without disturbing the traffic. Rx 1 panel/ module 1 panel/ module Tx Line Tx Line Rx Tx Monitor port (option) Monitor port (option) Rx Line Rx 2-fibre solution (1 fibre in each direction) Line Tx

7 DATA SHEET DB4134-E Issue F Page 3 of 6 The figure below illustrates how the DWDM wavelengths fit in with the standard CWDM wavelengths. DWDM nm The DWDM units may in addition to being used in a pure DWDM system also be connected to a CWDM system as shown in the figure to the right. The DWDM channels may be multiplexed/de-multiplexed on to the 1531 CWDM channel and the DWDM channels to the 1551 CWDM channel. CWDM Specifications Dimensions (HxWxD): panel: 44 x 484 (19 ) x 240 mm module: 130 x 35 x 210 mm 1-slot Weight: panel: Ca. 2 kg depending on equipment module: 0,2-0,5 kg depending on equipment Operating temperature: -40 C to 85 C Insertion loss*: 4-channel: < 5.0 db < 3.5 db typically 8-channel: < 6.6 db < 4.7 db typically 8-channel + Monitor: < 7.0 db < 5.0 db typically 16-channel: < 9.0 db < 6.7 db typically 32-channel: < 11.0 db < 8.2 db typically 40-channel + Monitor: < 13.0 db < 9.8 db typically * Loss over a system (2 panels and 4 connector-pairs) Wavelength: according to ITU-T G See the table on former page Pass band: +/ nm Monitor output (where available): db below the line signal (2-0.3%)

8 DATA SHEET DB4134-E Issue F Page 4 of 6 Overview of the DWDM units 4 channel DWDM FPM76/4DWDM 4 channel DWDM, ch x - y FP65/4DWDM FP65/2x4DWDM 4 channel DWDM, ch x - y 2 x 4 channel DWDM, ch x - y FPM76/4DWDM FP65/4DWDM * 8 channel DWDM FPM76/8DWDM 8-channel DWDM, ch x - y FP65/8DWDM FP65/8DWDM-M 8-channel DWDM, ch x - y 8-channel DWDM, ch x - y + Monitor FPM76/8DWDM FP65/8DWDM * 16 channel DWDM FPM76/16DWDM 16-channel DWDM, ch x - y FP65/16DWDM 16-channel DWDM, FPM76/16DWDM FP65/16DWDM * * example channel numbers - others may be used

9 DATA SHEET DB4134-E Issue F Page 5 of 6 Overview of the DWDM units cont. 32 channel DWDM FPM76/32DWDM 32-channel DWDM, ch x - y FP65/32DWDM 32-channel DWDM, ch x - y * FP65/32DWDM 40 channel DWDM FP65/40DWDM FP65/40DWDM+M 40-channel DWDM, ch x - y 40-channel DWDM, ch x - y + Monitor * FP65/40DWDM * example channel numbers - others may be used

10 DATA SHEET DB4134-E Issue F Page 6 of 6 Article numbers 1U Panel: FP65/4DWDM/yy-Sxxx FP65/4DWDM/yy-Sxxx-M FP65/8DWDM/yy-Sxxx FP65/8DWDM/yy-Sxxx-M FP65/16DWDM/yy-Sxxx FP65/16DWDM/yy-Sxxx-M FP65/32DWDM/yy-Sxxx FP65/32DWDM/yy-Sxxx-M FP65/40DWDM/yy-Sxxx-M FP65/40DWDM/yy-Sxxx-M 4-channel DWDM, ch yy - yy+4, xxx 4-channel DWDM, ch yy - yy+4 + Monitor port, xxx 8-channel DWDM, ch yy - yy+8, xxx 8-channel DWDM, ch yy - yy+8 + Monitor port, xxx 16-channel DWDM, ch yy - yy+16, xxx 16-channel DWDM, ch yy - yy+16 + Monitor port, xxx 32-channel DWDM, ch yy - yy+32, xxx 32-channel DWDM, ch yy - yy+32 + Monitor port, xxx 40-channel DWDM, ch yy - yy+40 + Monitor port, xxx 40-channel DWDM, ch yy - yy+40 + Monitor port, xxx Modules: FPM76/4DWDM/yy-Sxxx Module, 4-channel DWDM, ch yy - yy+4, xxx 1 slot FPM76/4DWDM/yy-Sxxx-M Module, 4-channel DWDM, ch yy - yy+4 + Monitor port, xxx 1 slot FPM76/8DWDM/yy-Sxxx Module, 8-channel DWDM, ch yy - yy+8, xxx 1 slot FPM76/8DWDM/yy-Sxxx-M Module, 8-channel DWDM, ch yy - yy+8 + Monitor port, xxx 1 slot FPM76/16DWDM/yy-Sxxx Module, 16-channel DWDM, ch yy - yy+16, xxx 2 slot FPM76/16DWDM/yy-Sxxx-M Module, 16-channel DWDM, ch yy - yy+16 + Monitor port, xxx 2 slot FPM76/32DWDM/yy-Sxxx Module, 32-channel DWDM, ch yy - yy+32, xxx 3 slot FPM76/32DWDM/yy-Sxxx-M Module, 32-channel DWDM, ch yy - yy+32 + Monitor port, xxx 3 slot yy = xxx = first channel number connector type in front of the panel/module: SC = SC/PC (not available for modules) SCA = SC/APC (not available for modules) LC = LC/PC LCA = LC/APC Other combinations of both the 1U panel and the modules may be available on request. Accessories FP70301 Cable guide, 0,5U FP70360 Cable guide, 1U FP70325 Storage unit, 2U 02/NCD513 Cable guide II FP70333 Cover, 3U FP70334 Cover, 4U Only for modules: FPM76100 FPM76105 FPM76106 FPM76190 Panel, modular, 12-slot, 3U Panel, modular, 3-slot, 1U Lid, 1U panel Blanking plate, 1-slot

11 WDM DATA SHEET DB4135-E Issue D Page 1 of /1550 passive optical multiplexer/de-multiplexer. Increases the capacity of existing networks by transferring several wavelengths on the same fibre. Independent of protocol and bitrate. The 1550 nm is a wideband channel and may be used to transfer up to 8 CWDM channels. Description The WDM is delivered as 1U panel or as modules for 1U/3U modular panel. They are based on reliable passive technology and are delivered with SC or LC interface with PC or APC polished connectors. Modules The modules are inserted in a 1U or 3U panel (se separate data sheet for details). The 3U panel may be populated with up to 12 modules, the 1U panel with up to 3 modules, and they may be placed in any order in the panel. This ensures a flexible and modular system with simple access to adding modules at a later stage and also offers high density with the panel fully equipped. Each module is complete with components for two-way communication, terminated in LC connectors at the front. The panel is intended for mounting in 19 racks. 1U panel This is a panel for mounting in 19 or metric racks. The panel may offer high density, but do not offer any good possibilities for later expansion within the same panel. Each panel is complete with components for two-way communication, terminated in SC or LC connectors at the front. 3U modular panel with modules The panel is ready to be installed in 19 racks. By turning the mounting bracket it may also be 1U panel med WDM installed in a metric rack. When the panel is to be placed in a 19" rack the bracket may be moved about 2 cm forward if needed. In this way the panel moves 2 cm further back in the rack. This gives more room in front of the panel, which may be beneficial for instance if the distance to the rack door is short. System description Passive WDM panels/modules are a reliable and reasonable method for transferring 2 wavelengths/signals over the same fibre (wavelength multiplexing). In this way you may increase the capacity of existing fibre-cable. A big advantage of using passive wavelength multiplexing is also that the method is protocol and bitrate independent. A complete system with components for two-way communication (multiplexer and de-multiplexer) in both ends are made with two panels/ modules.

12 DATA SHEET DB4135-E Issue D Page 2 of 4 The figure below shows a WDM system. To maintain signal quality, the 1310-signal is sent in the opposite direction through the fibre compared to what the Line Tx/Rx label indicates. This do not affect how the connections to the electronics or between the WDM s are done. All connections to/from the panel/module shall be Tx to Rx. This only needs to be considered when debugging the WDM-link, you will then see signals in both directions in both fibres. Rx 1 panel/ module panel/ module Tx Tx Line Tx 1310 Line Rx Rx Tx 1310 Rx Rx Line Rx 1550 Line Tx Tx The figure below illustrates how the WDM wavelengths (in grey) fit in with the standard CWDM wavelengths nm When using wideband WDM you may at a later stage expand number of channels by replacing the 1550-channel with up to 8 CWDM-channels as shown in the figure to the right.

13 DATA SHEET DB4135-E Issue D Page 3 of 4 Specifications Dimensions (HxWxD): panel: 44 x 484 (19 ) x 240 mm module: 130 x 35 x 210 mm Weight: panel: Ca. 2 kg depending on equipment module: 0,2-0,5 kg depending on equipment Operating temperature: -40 C to 85 C Insertion loss*: < 3.0 db Wavelength: / nm Isolation, adjacent channel: > 45 db * Loss over a system (2 panels and 4 connector-pairs) Overview of the WDM units WDM - WB FPM76/WDM-WB 1 x WDM, 1310/ wideband FP65/2xWDM-WB FP65/1xWDM-WB 2 x WDM, 1310/ wideband 1 x WDM, 1310/ wideband nm FPM76/WDM-WB FP65/WDM-WB

14 DATA SHEET DB4135-E Issue D Page 4 of 4 Article numbers 1U Panel: FP65/1xWDM-Sxxx-WB FP65/2xWDM-Sxxx-WB 1 x WDM, SM, 1310/1550-wideband, xxx 2 x WDM, SM, 1310/1550-wideband, xxx Modules: FPM76/WDM-Sxxx-WB Modul, 1 x WDM, SM, xxx, 1310/1550-wideband 1-slot FPM76/2xWDM-Sxxx-WB Modul, 2 x WDM, SM, xxx, 1310/1550-wideband 1-slot FPM76/3xWDM-Sxxx-WB Modul, 3 x WDM, SM, xxx, 1310/1550-wideband 1-slot FPM76/4xWDM-Sxxx-WB Modul, 4 x WDM, SM, xxx, 1310/1550-wideband 1-slot xxx = connector type in front of the panel/module: SC = SC/PC (not available for modules) SCA = SC/APC (not available for modules) LC = LC/PC LCA = LC/APC Other combinations of both the 1U panel and the modules may be available on request. Accessories FP70301 Cable guide, 0,5U FP70360 Cable guide, 1U FP70325 Storage unit, 2U 02/NCD513 Cable guide II FP70333 Cover, 3U FP70334 Cover, 4U Only for modules: FPM76100 FPM76105 FPM76106 FPM76190 Panel, modular, 12-slot, 3U Panel, modular, 3-slot, 1U Lid, 1U panel Blanking plate, 1-slot

15 OADM DATA SHEET DB4136-E Issue E Page 1 of 5 Wideband version: Adds and drops wideband 1310 nm. The express-channel may transfer up to 8 CWDM channels. CWDM version: Adds and drops CWDM channels. Delivered with 1 or more CWDM channels. Description The OADM is delivered as 1U panel or as modules for 1U/3U modular panel. They are based on reliable passive technology and are delivered with SC or LC interface with PC or APC polished connectors. Modules The modules are inserted in a 1U or 3U panel (se separate data sheet for details). The 3U panel may be populated with up to 12 modules, the 1U panel with up to 3 modules, and they may be placed in any order in the panel. This ensures a flexible and modular system with simple access to adding modules at a later stage and also offers high density with the panel fully equipped. Each module is complete with components for two-way communication, terminated in LC connectors at the front. The panel is intended for mounting in 19 racks. 1U panel This is a panel for mounting in 19 or metric racks. The panel may offer high density, but do not offer any good possibilities for later expansion within the same panel. Each panel is complete with components for two-way communication, terminated in SC or LC connectors at the front. 3U modular panel with modules The panel is ready to be installed in 19 racks. By turning the mounting bracket it may also be installed in a metric rack. When the panel is to be placed in a 19" rack the bracket may be moved about 2 cm forward if needed. In this way the panel moves 2 cm further back in the rack. This gives more room in front of the panel, which may be beneficial for instance if the distance to the rack door is short. 1U panel with OADM Add/Drop patch cord This is a patch cord with an integrated add or drop element. It may be used in both directions, but contains only one branch so it will work either as an add or as a drop. 2 patch cords put together will give add/drop in one direction, 4 patch cords makes up both directions. It is well suited when there is no room for a panel, but it will make it more difficult to track where the signal are running compared to using a panel. It may be delivered with SC or LC connectors. Add/Drop patch cord System description Passive multiplexers/de-multiplexers for CWDM or WDM are a reliable and reasonable method for transferring several wavelengths/signals over the same fibre (wavelength multiplexing). In this way you may increase the capacity of existing fibre-cable significantly. Combined with OADM you may add or drop wavelengths on the way between the end points. Combined with OADM you may add or drop separate wavelengths between end-points. A big advantage of using passive wavelength multiplexing is also that the method is protocol and bitrate independent.

16 DATA SHEET DB4136-E Issue E Page 2 of 5 OADM units may be delivered both for wideband 1310 and for CWDM-channels. When adding or dropping CWDM wavelengths (1 or more at the time), use OADM for CWDM. If a standard 1310 signal (not a 1311 CWDM signal) is to be added/dropped you need extra bandwidth and the OADM for for wideband 1310 must be used. Also OADM units for DWDM-wavelengths may be delivered on request. If you want to combine 1310 and CWDM you may make a connection as shown in the example below. Observe that the express channel (in->out) for wideband 1310 is limited to nm, while the OADM for CWDM covers the whole wavelength range of nm. The example shows three OADM branches (with example wavelengths), but you may have as many branches as you need as long as you do not exceed your link-loss budget (every OADM adds some loss) / panel/module 1 panel/module 1 panel/module / ± ± ± ± An add/drop patch cord contains only one branch so it will work either as an add or as a drop. Connecting several patch cords will give you the functionality you want. If you want add/drop in both directions you connect 2 and 2 patch cords as shown below, xxxx is the wavelength added or dropped. COM R R COM P:xxxx P:xxxx COM R R COM P:xxxx P:xxxx The figure below illustrates the available wavelengths in a standard CWDM system and also how the wideband 1310 and DWDM wavelengths fit in. Observe that 1310 indicates the wideband version (+/- 50 nm), while 1311 indicates the CWDM version (+/- 6.5 nm) (grey) DWDM nm

17 DATA SHEET DB4136-E Issue E Page 3 of 5 Specifications Dimensions (HxWxD): panel: 44 x 484 (19 ) x 240 mm module: 130 x 35 x 210 mm Weight: panel: Ca. 2 kg depending on equipment module: 0,2-0,5 kg depending on equipment Operating temperature: -40 C to 85 C OADM w/wideband 1310: Insertion loss express (in->out)*: < 1.3 db Insertion loss add/drop*: < 1.5 db Express wavelength: nm Centre wavelength: 1310 nm (+/-50 nm) OADM w/ 1 CWDM-channel: Insertion loss express (in->out)*: < 1.3 db Insertion loss add/drop*: < 1.5 db Centre wavelength: 1311, 1471, 1491, 1511, 1531, 1551, 1571, 1591 or 1611 nm (+/-6.5 nm) OADM w/ 4 CWDM-channels: Insertion loss express (in->out)*: < 0,5 db + N x 0,5 db 4 channels (N=4) gives 2,5 db Insertion loss add/drop*: < 1,2 db + (N-1) x 0,5 db 4 channels (N=4) gives 2,7 db Centre wavelength: 1471/1491/1511/1531 or 1551/1571/1591/1611 or 1471/1491/1591/1611 * Insertion loss in 1 panel (included connectors) Add/Drop patch cord: Insertion loss express (in->out)*: < 1.0 db Insertion loss add/drop*: < 1.2 db Centre wavelength: 1271, 1291, 1311, 1331, 1351, 1371, 1391, 1411, 1431, 1451, 1471, 1491, 1511, 1531, 1551, 1571, 1591 or 1611 nm (+/-6.5 nm) * Insertion loss included connectors

18 A D INN UT DATA SHEET DB4136-E Issue E Page 4 of 5 Overview of the OADM units OADM w/wideband 1310 OADM A D INN UT FPM76/OADM-1310-WB Add/Drop node, FP65/OADM-1310-WB Add/Drop node, add/drop Express (in/out) nm OADM w/1 CWDM-channel FPM76/OADM-1310-WB FP65/OADM-1310-WB OADM FPM76/OADM-1531* Add/Drop node, 1531* FP65/OADM-1531* Add/Drop node, 1531* Express (in/out) add/drop nm OADM w/4 CWDM-channels FPM76/4xOADM-1471* OADM 1471/1491/1591/1611* Express (in/out) FPM76/OADM-1571 FP65/OADM-1571 OADM A1 D1 A2 D2 FP65/4xOADM-1471* OADM 1471/1491/1591/1611* add/drop add/drop Express (in/out) Express (in/out) nm FPM76/4xOADM-1471 FP65/4xOADM-1471 * example channel (s) - others may be used

19 DATA SHEET DB4136-E Issue E Page 5 of 5 Article numbers 1U Panel: FP65/OADM-1310/WB-Sxxx Add / Drop node, nm FP65/OADM-yyyy-Sxxx Add/Drop node, yyyy nm FP65/4xOADM-1471-Sxxx* OADM 1471/1491/1591/1611 Modules: FPM76/OADM-1310/WB-Sxxx Add / Drop node, nm 1-slot FPM76/OADM-yyyy-Sxxx Add/Drop node, yyyy nm 1-slot FPM76/4xOADM-1471-Sxxx* OADM 1471/1491/1591/ slot yyyy = 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611 eller 1311 xxx = connector type in front of the panel/module: SC = SC/PC (not available for modules) SCA = SC/APC (not available for modules) LC = LC/PC LCA = LC/APC * No. of channels and wavelength added/dropped may be chosen freely. Other combinations of both the 1U panel and the modules may be available on request. OADM for DWDM-channels may also be available on request. Add/Drop patch cord: 8-OADM/yyyy-Sxxx 8-OADM/1310/WB-Sxxx Add / Drop patch cord, yyyy nm, xxx Add / Drop patch cord, nm, xxx yyyy = 1271, 1291, 1311, 1331, 1351, 1371, 1391, 1411, 1431, 1451, 1471, 1491, 1511, 1531, 1551, 1571, 1591 eller 1611 xxx = connector type in front of the panel/module: SC = SC/PC SCA = SC/APC LC = LC/PC LCA = LC/APC Accessories FP70301 Cable guide, 0,5U FP70360 Cable guide, 1U FP70325 Storage unit, 2U 02/NCD513 Cable guide II FP70333 Cover, 3U FP70334 Cover, 4U Only for modules: FPM76100 FPM76105 FPM76106 FPM76190 Panel, modular, 12-slot, 3U Panel, modular, 3-slot, 1U Lid, 1U panel Blanking plate, 1-slot

20 Splitter DATA SHEET DB4137-E Issue E Page 1 of 5 Passive splitters for distributing the signal to several fibres without changing the wavelength. May be delivered as 1:2, 1:4, 1:8, 1:16, 1:32 or 1:64 splitter. Independent of protocol and bitrate. Description The splitters are delivered as 1U panel or as modules for 1U/3U modular panel. They are based on reliable passive technology and are delivered with SC or LC interface with PC or APC polished connectors. Modules The modules are inserted in a 1U or 3U panel (se separate data sheet for details). The 3U panel may be populated with up to 12 modules, the 1U panel with up to 3 modules, and they may be placed in any order in the panel. This ensures a flexible and modular system with simple access to adding modules at a later stage and also offers high density with the panel fully equipped. Each module is complete with components for two-way communication, terminated in LC connectors at the front. The panel is intended for mounting in 19 racks. 1U panel This is a panel for mounting in 19 or metric racks. The panel may offer high density, but do not offer any good possibilities for later expansion within the same panel. Each panel is complete with components for two-way communication, terminated in SC or LC connectors at the front. 3U modular panel with CWDM modules The panel is ready to be installed in 19 racks. By turning the mounting bracket it may also be installed in a metric rack. When the panel is to be placed in a 19" rack the bracket may be 1U panel with 1:64 splitter moved about 2 cm forward if needed. In this way the panel moves 2 cm further back in the rack. This gives more room in front of the panel, which may be beneficial for instance if the distance to the rack door is short. Components The Splitters may also be delivered as separate components with or without connectors. Splitter production is based on 2 technologies: FBT and PLC. FBT splitters are based on traditional technology where the fibres are fused together side by side (Fused Biconical Taper). This is a reasonable technology for small splitters like 1:2, but they have a limited wavelength range (1310 ± 20, 1490 ± 20 and 1550 ± 20 nm). 1:2 splitters exists in several versions where the effect is distributed differently between the 2 outputs: 10-90%, 20-80%, 30-70%, 40-60% and 50-50% 1:2 splitter with SC/APC-connectors PLC splitters are based on "Planar Waveguide" technology where the light is led through waveguides in a substrate. These waveguides are made with branches according to how the light shall be split. This enables physically small splitters all the way up to 1:64 covering all of the usual wavelength range ( nm). 1:2 splitters of this type only exists as the type where the effect is equally distributed: 50-50%.

21 DATA SHEET DB4137-E Issue E Page 2 of 5 System description A passive splitter distributes the optical signal to several fibres without changing the wavelength. The signal may be sent both ways through the splitter (typically for PON) and may in that way also be used for combining signals in to a fibre. To be able to combine the signals must have different wavelength or send at different times (TDM - Time Division Multiplexing) ) so that they do not disturb each other. 1 : : Linje 64 Specifications Dimensions (HxWxD): panel: 44 x 484 (19 ) x 240 mm module: 130 x 35 x 210 mm Weight: panel: Ca. 2 kg depending on equipment module: 0,2-0,5 kg depending on equipment Operating temperature: -40 C to 85 C Insertion loss*: 1:2-10/90 <11,6/1,2 db 1:2-20/80 <8,3/1,75 db 1:2-30/70 <6,4/2,55 db 1:2-40/60 <5,1/3,25 db 1:2-50/50 <4,1/4,1 db 1:4 <8,5 db 1:8 <11,2 db 1:16 <14,5 db 1:32 <17,4 db 1:64 <21,5 db Wavelength: FBT-type (1:2) 1310 ± 20, 1490 ± 20 and 1550 ± 20 nm PLC-type: nm Directivity: > 50 db * Insertion loss included 1 connector

22 DATA SHEET DB4137-E Issue E Page 3 of 5 Article numbers Modules: FPM76/1:2-xxx-10/90-SM Splitter, 1:2, xxx, 10/90, SM 1-slot FPM76/1:2-xxx-20/80-SM Splitter, 1:2, xxx, 20/80, SM 1-slot FPM76/1:2-xxx-30/70-SM Splitter, 1:2, xxx, 30/70, SM 1-slot FPM76/1:2-xxx-40/60-SM Splitter, 1:2, xxx, 40/60, SM 1-slot FPM76/1:2-xxx-50/50-SM Splitter, 1:2, xxx, 50/50, SM 1-slot FPM76/1:4-xxx-SM Splitter, 1:4, xxx, SM 1-slot FPM76/1:8-xxx-SM Splitter, 1:8, xxx, SM 1-slot FPM76/1:16-xxx-SM Splitter, 1:16, xxx, SM 1-slot FPM76/1:32-xxx-SM Splitter, 1:32, xxx, SM 2-slot FPM76/1:64-xxx-SM Splitter, 1:64, xxx, SM 3-slot 1U Panel: FP65/1:2-xxx-10/90-SM FP65/1:2-xxx-20/80-SM FP65/1:2-xxx-30/70-SM FP65/1:2-xxx-40/60-SM FP65/1:2-xxx-50/50-SM FP65/2x1:2-xxx-yy-SM FP65/4x1:2-xxx-yy-SM FP65/6x1:2-xxx-yy-SM FP65/8x1:2-xxx-yy-SM FP65/10x1:2-xxx-yy-SM FP65/12x1:2-xxx-yy-SM FP65/1:4-xxx-SM FP65/1:8-xxx-SM FP65/1:16-xxx-SM FP65/1:32-xxx-SM FP65/1:64-LC-SM FP65/1:64-LCA-SM Panel, splitter, 1:2, xxx, 10/90, SM Panel, splitter, 1:2, xxx, 20/80, SM Panel, splitter, 1:2, xxx, 30/70, SM Panel, splitter, 1:2, xxx, 40/60, SM Panel, splitter, 1:2, xxx, 50/50, SM Panel, splitter, 2 x 1:2, xxx, yy, SM Panel, splitter, 4 x 1:2, xxx, yy, SM Panel, splitter, 6 x 1:2, xxx, yy, SM Panel, splitter, 8 x 1:2, xxx, yy, SM Panel, splitter, 10 x 1:2, xxx, yy, SM Panel, splitter, 12 x 1:2, xxx, yy, SM Panel, splitter, 1:4, xxx, SM Panel, splitter, 1:8, xxx, SM Panel, splitter, 1:16, xxx, SM Panel, splitter, 1:32, xxx, SM Panel, splitter, 1:64, LC/PC, SM Panel, splitter, 1:64, LC/APC, SM xxx = connector type in front of the panel/module: SC = SC/PC (not available for modules) SCA = SC/APC (not available for modules) LC = LC/PC LCA = LC/APC yy = splitter ratio: 10/90, 20/80, 30/70, 40/60 eller 50/50 Other combinations of both the 1U panel and the modules may be available on request. For 1:2 splitters FBT type is used for the other splitters (1:4-1:64) PLC is used.

23 DATA SHEET DB4137-E Issue E Page 4 of 5 Separate splitters, terminated SP-1:2-50-x SP-1:2-40-x SP-1:2-30-x SP-1:2-20-x SP-1:2-10-x SP-1:4-x SP-1:8-x SP-1:16-x SP-1:32-x SP-1:64-x Splitter, 1:2, 50/50, 9/125/900, x Splitter, 1:2, 40/60, 9/125/900, x Splitter, 1:2, 30/70, 9/125/900, x Splitter, 1:2, 20/80, 9/125/900, x Splitter, 1:2, 10/90, 9/125/900, x Splitter, 1:4, 9/125/900, x Splitter, 1:8, 9/125/250, x Splitter, 1:16, 9/125/250, x Splitter, 1:32, 9/125/250, x Splitter, 1:64, 9/125/250, x For 1:2 splitters FBT type is used for the other splitters (1:4-1:64) PLC is used. x = connector type: 0 = No connector 5 = FC/PC L = LC/PC F = E2000/PC 7 = SC/PC D = FC/APCR K = LC/APC G = E2000/APC E = SC/APC H = FC/APCN M = MU/PC Separate splitters, un-terminated FBT AT Splitter, 1:2, 50/50, 9/125/ Splitter, 1:2, 40/60, 9/125/ Splitter, 1:2, 30/70, 9/125/ Splitter, 1:2, 20/80, 9/125/ Splitter, 1:2, 10/90, 9/125/900 PLC PLSC Splitter, 1:2, 9/125/900 PLSC Splitter, 1:4, 9/125/900 PLSC Splitter, 1:8, 9/125/250 PLSC Splitter, 1:16, 9/125/250 PLSC Splitter, 1:32, 9/125/250 PLSC Splitter, 1:64, 9/125/250 Accessories FP70301 Cable guide, 0,5U FP70360 Cable guide, 1U FP70325 Storage unit, 2U 02/NCD513 Cable guide II FP70333 Cover, 3U FP70334 Cover, 4U Only for modules: FPM76100 FPM76105 FPM76106 FPM76190 Panel, modular, 12-slot, 3U Panel, modular, 3-slot, 1U Lid, 1U panel Blanking plate, 1-slot

24 DATA SHEET DB4137-E Issue E Page 5 of 5 Gallery Panel with splitter, 1:2 - SC/PC Panel with splitter, 1:8 - SC/PC Panel with splitter, 1:16 - SC/PC Panel with splitter, 1:64 - LC/APC Module with splitter, 1:2 - LC/PC Module with splitter, 1:16 - LC/APC Modul with splitter, 1:32 - LC/PC 1U panel with modules 1U panel with modules with lid 1:2 splitter 1:64 splitter 1:2 splitter with SC/APC-connectors

CWDM. DATA SHEET DB4133-E Issue F Page 1 of 8

CWDM. DATA SHEET DB4133-E Issue F Page 1 of 8 CWDM DATA SHEET DB4133-E Issue F Page 1 of 8 Passive optical multiplexer/de-multiplexer. Increases the capacity of existing networks by transferring several wavelengths on the same fibre. Independent of

More information

Optical Communications Mainframe Optical Wavelength Division Multiplexer

Optical Communications Mainframe Optical Wavelength Division Multiplexer Description Features The optical wavelength division multiplexer module is designed to plug into the PBN optical communications mainframe chassis (OCM). The module can be optioned for simple, dual wavelength

More information

LightMUX. Passive Optical Networking

LightMUX. Passive Optical Networking PORTFOLIO OVERVIEW LightMUX LightMUX Passive Optical Networking Optelian FTTx/PON splitters and wavelength division multiplexers (WDMs) make the distribution of triple-play (voice, data, and video) traffic

More information

Introduction to WaveSmart Optical Components

Introduction to WaveSmart Optical Components Introduction to WaveSmart Optical Components Clearfield delivers unparalleled fiber performance with its WaveSmart optical components - custom built for the unique light requirements and interoperability

More information

Modular Passive CWDM Multiplexers (Cassettes)

Modular Passive CWDM Multiplexers (Cassettes) Modular Passive CWDM Multiplexers (Cassettes) Overview Getting the most out of your network is critical in today s capital-constrained environment. Deploying dedicated fiber runs to every location is both

More information

Wall-mount box mini. Specifications

Wall-mount box mini. Specifications Wall-mount box mini DATA SHEET DB4124-E Issue C Page 1 of 1 For indoor use. For termination of optical connectors. Prepared for splicing of pigtails (splice holder included). Adapter plates exists for

More information

Telecommunication Products

Telecommunication Products Telecommunication Products Media Converters Couplers / Splitters WDM CWDM Telecommunication Products Media Converters The media converter is the most economical way to deploy fibre into your network. This

More information

LEAD Fiber Optics PRODUCT CATALOGUE

LEAD Fiber Optics PRODUCT CATALOGUE LEAD Fiber Optics PRODUCT CATALOGUE FIBER OPTIC ATTENUATOR Fixed plug-in type TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http://www.twfiberoptic.com Fixed plug in type Attenuator Fixed plug in fiber

More information

DWDM 200G Mux/Demux 4Ch 8Ch 16Ch 32Ch

DWDM 200G Mux/Demux 4Ch 8Ch 16Ch 32Ch 4, 8, 16, 32Ch DWDM Mux and Demux Lightem DWDM Mux and Demux are designed to multiplex multiple DWDM channels into one or two fibers. The common configuration is 4, 8, 16 and 32 channels. Available in

More information

Optical Splitter for Telecommunication Networks

Optical Splitter for Telecommunication Networks Introduction: Optical PLC splitter is a passive optical component which have a significant impact on the efficiency of communication network roll-outs especially in FTTx deployment. The incorporation of

More information

CWDM Passive Optical Add/Drop Multiplexers

CWDM Passive Optical Add/Drop Multiplexers Data Center & Cloud Computing DATASHEET CWDM Passive Optical Add/Drop Multiplexers Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2017 CWDM Passive Optical Add/Drop Multiplexers 01 Overview

More information

CISCO WDM SERIES OF CWDM PASSIVE DEVICES

CISCO WDM SERIES OF CWDM PASSIVE DEVICES DATA SHEET CISCO WDM SERIES OF CWDM PASSIVE DEVICES Cisco Systems introduces its second generation of coarse wavelength-division multiplexing (CWDM) passive devices boasting increased functions and improved

More information

Passive components Introduction. Optical Splitters and Couplers. Passive components - Optical Splitters and Couplers

Passive components Introduction. Optical Splitters and Couplers. Passive components - Optical Splitters and Couplers Introduction Optical Splitters and Couplers Today s leading TTH technology is PON (Passive Optical Network) technology. This approach differs from most of the telecommunications networks in place today

More information

BUSINESS CLASS SERVICES. COMMERCIAL ACCESS SOLUTIONS Ordering Guide

BUSINESS CLASS SERVICES. COMMERCIAL ACCESS SOLUTIONS Ordering Guide BUSINESS CLASS SERVICES COMMERCIAL ACCESS SOLUTIONS Ordering Guide POINT - TO - POINT ARCHITECTURE CUSTOMER$$PREMISES COMM$ACCESS$ ROUTER 8ch$&$10ch$CWDM$HiDT mounted$in$a$medium$ust Fiber$Splice$Shelf$5$1RU

More information

Fibre optical adapters

Fibre optical adapters Fibre optical adapters DATA SHEET DB4120-E Issue P Page 1 of 8 For connection of fibre optical connectors. Single or multi mode. Adapters for most connector types. SC adapters 23200316 Adapter, SC SPX,

More information

FTTX Solutions Passive Optical Splitter Modules. 7th Edition

FTTX Solutions Passive Optical Splitter Modules. 7th Edition Passive Optical Splitter Modules 7th Edition Passive Optical Splitter Modules Introduction...1 Applications...2 Splitter Specifications...3 Mini Plug-and-Play Modules...4 GF Modular Splitter Block...5

More information

100 or 200GHz DWDM FILTER (ITU Grid Wavelengths)

100 or 200GHz DWDM FILTER (ITU Grid Wavelengths) Pass Reflect 100 or 200GHz DWDM FILTER Parameter Unit 100GHz 200GHz Bandwidth (@-0.5dB) nm ±.011 ±0.25 Center Wavelength Accuracy nm ±.05 ±0.10 Ripple Max db 0.4 Adjacent (23, All SOP) Min db 25 Isolation

More information

DATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 40ch DWDM Mux Demux + Montior Port nm Port for 40G/100G. 1U Rack Mount, LC/UPC

DATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 40ch DWDM Mux Demux + Montior Port nm Port for 40G/100G. 1U Rack Mount, LC/UPC Data Center & Cloud Computing DATASHEET 40ch DWDM Mux Demux + Montior Port + 1310nm Port for 40G/100G 1U Rack Mount, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV10 2018 Overview DWDM

More information

DATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 40ch DWDM Mux Demux + Montior Port nm Port for 40G/100G. 1U Rack Mount, LC/UPC

DATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 40ch DWDM Mux Demux + Montior Port nm Port for 40G/100G. 1U Rack Mount, LC/UPC Data Center & Cloud Computing DATASHEET 40ch DWDM Mux Demux + Montior Port + 1310nm Port for 40G/100G 1U Rack Mount, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2017 Overview Highlights

More information

DATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 40ch DWDM Mux Demux + Monitor Port. 1U Rack Mount, LC/UPC

DATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 40ch DWDM Mux Demux + Monitor Port. 1U Rack Mount, LC/UPC Data Center & Cloud Computing DATASHEET 40ch DWDM Mux Demux + Monitor Port 1U Rack Mount, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2017 Overview DWDM Mux Demux 01 The 40ch Mux

More information

Rack Mounted Products

Rack Mounted Products SRS4000 Distribution Sub-Rack Prysmian Part Number: See Below The SRS4000 Distribution Sub-Rack is a modular sub-rack available in a variety of configurations for integration into 19 / ETSI / ANSI racks,

More information

3M Passive Optical Splitter Shelves and Modules

3M Passive Optical Splitter Shelves and Modules Communication Markets Division 3M Passive Optical Splitter Shelves and Modules 3M offers a robust portfolio of passive optical fiber splitter products made to enable easy configuration, design, ordering,

More information

Rack Mounted Products

Rack Mounted Products SRS3000 1U Patch Only Shelf Prysmian Part Number: See table on following pages. The SRS3000 Patch Only Shelf is a modular unit available in a variety of configurations for integration in to 19 and ETSI

More information

DATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 40 Channels C21-C60 Dual Fiber DWDM Mux Demux + Monitor Port. 1U Rack Mount, LC/UPC

DATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 40 Channels C21-C60 Dual Fiber DWDM Mux Demux + Monitor Port. 1U Rack Mount, LC/UPC Data Center & Cloud Computing DATASHEET 40 Channels C21-C60 Dual Fiber DWDM Mux Demux + Monitor Port 1U Rack Mount, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2018 Overview DWDM

More information

Cubro OPTOSLIM TAPs Series (Upto 100 G)

Cubro OPTOSLIM TAPs Series (Upto 100 G) Cubro OPTOSLIM TAPs Series (Upto 100 G) PRODUCT OVERVIEW Network TAPs At a glance Definition A network TAP (test access point) is an external monitoring device that mirrors the traffic that passes between

More information

DATA SHEET. PON Optical Splitters. Splice Tube, Flange, Flat Box, ODF and Rack Mount Types PLC OPTICAL SPLITTERS. Overview. Application.

DATA SHEET. PON Optical Splitters. Splice Tube, Flange, Flat Box, ODF and Rack Mount Types PLC OPTICAL SPLITTERS. Overview. Application. PON Optical Splitters Splice Tube, Flange, Flat Box, ODF and Rack Mount Types Overview Planar Lightwave Circuit (PLC) optical splitters provide best performance being fabricated using silica optical waveguide

More information

Splitter Wave Division Multiplexer Modules Custom modules to meet your specialty network applications

Splitter Wave Division Multiplexer Modules Custom modules to meet your specialty network applications Splitter Wave Division Multiplexer Modules Custom modules to meet your specialty network applications Features and Benefits Cost effective solutions Diverse range of split ratios Fits standard 7-inch LGX

More information

FDH Sealed Fiber Distribution Hub. Features and Benefits

FDH Sealed Fiber Distribution Hub. Features and Benefits Introducing the sealed fiber distribution hub (FDH) 4000 from CommScope. Increasingly, aesthetic ordinances and equipment size restrictions are making it more difficult to secure permits in FTTx deployments.

More information

CWDM Products. Coarse Wavelength Division Multiplexing (CWDM) CWDM & Conversion for Optical Networks from the network connectivity experts

CWDM Products. Coarse Wavelength Division Multiplexing (CWDM) CWDM & Conversion for Optical Networks from the network connectivity experts Products Coarse Wavelength Division Multiplexing () & Conversion for Optical Networks from the network connectivity experts Transition Networks new products help you to alleviate fiber exhaustion and increase

More information

Single Stage Isolator

Single Stage Isolator Single Stage Isolator 1.Description: Single stage isolator is a kind of the optical passive device, its basic function is to realize the positive transfer optical signal, and inhibit reverse light. 2.Features:

More information

Planar Lightwave Circuit (PLC) Splitter, 1x4, 1x8, 1x12 and 1x16 Configurations in PEACOC Flexible Tray

Planar Lightwave Circuit (PLC) Splitter, 1x4, 1x8, 1x12 and 1x16 Configurations in PEACOC Flexible Tray FEATURES: Telcordia GR-1221 Compliant Patented accessibility; easy, fast and accurate Low Insertion Loss Up to 24 simplex LC connectors per tray or 12 SC Simplex Connector Excellent Uniformity Low PDL

More information

Pluggable Transceivers, Module Connectors

Pluggable Transceivers, Module Connectors Pluggable Transceivers, page 1 Module Connectors, page 7 Pluggable Transceivers This section provides brief descriptions of the pluggable transceivers that can be installed in the switch modules and supervisor

More information

Cisco MDS 9000 Family Pluggable Transceivers

Cisco MDS 9000 Family Pluggable Transceivers Cisco MDS 9000 Family Pluggable Transceivers The Cisco Small Form-Factor Pluggable (), and X2 devices for use on the Cisco MDS 9000 Family are hot-swappable transceivers that plug into ports on the Cisco

More information

Dense Shelf and Passive Module System

Dense Shelf and Passive Module System Technical Brochure Dense Shelf and Passive Module System An elegant solution to wavelength division multiplexing, splitting, and fiber management. This is one of the most innovative, densest passive solutions

More information

TFF Tap Splitter, 1x2 and 2x2 configurations in PEACOC Flexible Tray

TFF Tap Splitter, 1x2 and 2x2 configurations in PEACOC Flexible Tray FEATURES: RoHS 6/6 Compliant Low Insertion Loss Up to 24 simplex LC connectors per tray or 12 SC Simplex Connector Patented accessibility; easy, fast and accurate Flat and Wide Passband Low Polarization

More information

Optical Networking Solutions

Optical Networking Solutions Optical Networking Solutions Optelian designs, manufactures and supplies optical networking equipment and solutions for network operators and communication service providers, and provides all services

More information

Fibre optical adapters

Fibre optical adapters Fibre optical adapters DATA SHEET DB4120-F Issue E Page 1 of 8 For connection of fibre optical connectors. Single or multi mode. Adapters for most connector types. SC adapters 23200294 Adapter, SC SPX,

More information

BWDM CWDM DWDM WDM TECHNOLOGY

BWDM CWDM DWDM WDM TECHNOLOGY BWDM CWDM DWDM WDM TECHNOLOGY INTRODUCTION User s of today s voice, video, and data networks are becoming more complex requiring more bandwidth and faster transmission rates over ever increasing distances.

More information

FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU

FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU FIBREOPTIC RACK MOUNT ENCLOSURE: FIXED The JCS Technologies fixed rack mountable fibreoptic break out enclosure is suitable for patching

More information

Updated in Free Product Guide for Your Network. WDM & FTTx. Catalog

Updated in Free Product Guide for Your Network. WDM & FTTx. Catalog Updated in 2017 Free Product Guide for Your Network WDM & FTTx Catalog FS.COM WDM & FTTx This catalog is a guide of FS.COM WDM & FTTH solutions. FS.COM self-develops a series of OTN (optical transport

More information

CWDM Module 1. Features

CWDM Module 1. Features CWDM Module 1. Features Low Insertion Loss High Isolation Low PDL Compact Design Good Channel-to-channel Uniformity Wide Operating Wavelength: 1260nm~1620nm or 1460nm~1620nm Wide Operating Temperature:

More information

C2LINX. Ordering Guide

C2LINX. Ordering Guide Ordering Guide Table of Contents Overview... 3 Key Benefits... 3 Panels... 3 Section One: Chassis... 4 Section 3: Trays... 5 Section 4: Modules... 6 a. Patch... 6 b. Patch and Splice... 7 c. Pre-terminated

More information

DWDM Cards. 6.1 DWDM Card Overview CHAPTER

DWDM Cards. 6.1 DWDM Card Overview CHAPTER CHAPTER 6 This chapter describes Cisco ONS 15454 dense wavelength-division multiplexing (DWDM) card features and functions. For installation and card turn-up procedures, refer to the Cisco ONS 15454 Procedure

More information

PLC SPLITTER PRODUCTS

PLC SPLITTER PRODUCTS PLC SPLITTER PRODUCTS PLC Splitter Products FIBER OPTIC PRODUCTS PLC SPLITTER PRODUCTS Professional on providing complete, high-performance Optic Communication Components and Premise Distribution Solutions

More information

LEAD Fiber Optics PRODUCT CATALOGUE

LEAD Fiber Optics PRODUCT CATALOGUE LEAD Fiber Optics PRODUCT CATALOGUE OPTICAL TERMINATOR TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http:// Optical Terminator Optical Terminators are used to terminate unused fiber connector ports in

More information

DWDM Topologies CHAPTER. This chapter explains Cisco ONS dense wavelength division multiplexing (DWDM) topologies.

DWDM Topologies CHAPTER. This chapter explains Cisco ONS dense wavelength division multiplexing (DWDM) topologies. CHAPTER 12 This chapter explains Cisco ONS 15454 dense wavelength division multiplexing (DWDM) topologies. Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature.

More information

5U CWDM Managed Platform SML-5000

5U CWDM Managed Platform SML-5000 CWDM Managed Platform 5U CWDM Managed Platform 5000 The SigmaLinks5000 is a flexible, cost-effective optical transport system, designed to multiplex, de-multiplex and switch high-speed data for storage,

More information

Network Evolution Driving forces and influences on the physical Network

Network Evolution Driving forces and influences on the physical Network Network Evolution Driving forces and influences on the physical Network Agenda Network Evolution New IEC Standards for FO connectivity NGON New Generation Optical Networks 15 Years ago and today s VISIONS

More information

Optimux-4T1 Four-Channel T1 Multiplexer

Optimux-4T1 Four-Channel T1 Multiplexer Data Sheet Optimux-4T1 Any Traffic Over Fiber Multiplexes four T1 channels over a fiber optics link with various fiber interfaces: multimode, single-mode (up to 120 km), and single-mode over single fiber

More information

Agilent Lightwave Solution Platform

Agilent Lightwave Solution Platform Agilent Lightwave Solution Platform Configuration Guide May 2005 This guide provides configuration details for the Agilent 816xB family of mainframes and modules, including options and accessories. 8163B

More information

ARIADROP: Fiber to the MDU (FTTM)

ARIADROP: Fiber to the MDU (FTTM) DROP: Fiber to the MDU (FTTM) 05 Issue BECAUSE PERFORMANCE MATTERS DROP: Fiber to the MDU (FTTM) DROP DS-BS- 04/07/05 Overview Technologies DROP System is designed to provide both labor and material savings

More information

Brochure. WDM Solutions. Methods for Optimizing Fiber Capacity. Transition Networks Brochure.

Brochure. WDM Solutions. Methods for Optimizing Fiber Capacity. Transition Networks Brochure. Brochure WDM Solutions Methods for Optimizing Fiber Capacity Transition Networks Brochure Introduction to WDM Overview Demands on today s voice, video, and data networks are becoming more complex requiring

More information

Aerial Façade. Cabinets and borders. Butt and Sleeves Closures for manholes and handholes

Aerial Façade. Cabinets and borders. Butt and Sleeves Closures for manholes and handholes 6. Building Risers 6. 3M Solutions for Building Risers Single Family Units Skyscrapers Aerial Façade Cabinets and borders Central Telecom POP Butt and Sleeves Closures for manholes and handholes Applications

More information

MTP/MPO Cable Assemblies

MTP/MPO Cable Assemblies MTP/MPO Cable Assemblies MTP cable assemblies are multi-fiber patch cords suitable for high-density back plane and PCB solutions. MTP brand Fan-Out, Interconnect and Trunk cable offer up to 36 times the

More information

Racks. RS3000 Rack. Features and Benefits. Prysmian Part Numbers: See below. Kit Contents. Additional Items Recommended. Prysmian Part Numbers

Racks. RS3000 Rack. Features and Benefits. Prysmian Part Numbers: See below. Kit Contents. Additional Items Recommended. Prysmian Part Numbers Racks RS3000 Rack Prysmian Part Numbers: See below The RS3000 Rack is a standard rack with 19 mounting rails, used to accommodate a range of SRS3000 shelves and sub-racks or any other 19 rack mounted products.

More information

GEOLT. Gigabit Ethernet Optical Line Terminal. About the Product

GEOLT. Gigabit Ethernet Optical Line Terminal. About the Product About the Product Presenting the new and advanced Light Link Series 2 (). Designed for IEEE802.3ah compliant GEPON, the is part of PBN s high density FTTx product range. The and the matching ONU subscriber

More information

Specification for Dispersion Slope Compensating Module for TW-RS Transmission Fiber in the C-band TWRS-DK

Specification for Dispersion Slope Compensating Module for TW-RS Transmission Fiber in the C-band TWRS-DK Specification for Dispersion Slope Compensating Module for TW-RS Transmission Fiber in the C-band TWRS-DK Version 1.12 2015-09-09 1 Ordering information Order code format: TWRSDK-S-xxx-yy-zz Mechanical

More information

SyRotech Distributor Price List w.e f. JULY 2017

SyRotech Distributor Price List w.e f. JULY 2017 M/S Pratik Infotech 2 nd Floor, City Centre, Club Road, Ranchi Email id:--sales@pratikinfotech.in SyRotech Distributor Price List w.e f. JULY 2017 HSN Code SYROTECH Item Name Description Unit Price ( INR)

More information

Dual Stage Isolator. 1.Description:

Dual Stage Isolator. 1.Description: Dual Stage Isolator 1.Description: Dual stage isolator is a kind of the optical component, its basic function is to realize the positive transfer optical signal, and inhibit reverse light. 2.Features:

More information

FlexPOD. Fiberlink. Flexible Passive Optical Distributor. User s Manual. Artel Video Systems Fiberlink FlexPOD. Fiberlink FlexPOD is a

FlexPOD. Fiberlink. Flexible Passive Optical Distributor. User s Manual. Artel Video Systems Fiberlink FlexPOD. Fiberlink FlexPOD is a Artel Video Systems Fiberlink FlexPOD User s Manual Fiberlink FlexPOD is a configurable passive optical signal distribution system to create up to 4 different and independent optical coarse wave division

More information

CANSTAR Fiber Optic Couplers

CANSTAR Fiber Optic Couplers CANSTAR Fiber Optic Couplers Created in 1989, FCI an Areva Group company rapidly secured its place among the world s top three manufacturers of connectors and interconnect systems. With a turnover of 1.8

More information

Retired. HP CWDM Slot B 4-port Add/Drop Multiplexer. HP CWDM 8-port Multiplexer HP CWDM Multiplexer 2-Slot Chassis

Retired. HP CWDM Slot B 4-port Add/Drop Multiplexer. HP CWDM 8-port Multiplexer HP CWDM Multiplexer 2-Slot Chassis QuickSpecs Overview The HP Coarse Wave Division Multiplexer (CWDM) solution Family is a set of passive optical systems designed to provide optical network support for high-speed data Fibre Channel & Ethernet

More information

6. Building Risers M Solutions for Medium Buildings. Description

6. Building Risers M Solutions for Medium Buildings. Description 6. Building Risers 6.2 3M Solutions for Medium Buildings Medium buildings with 5-8 levels / average of about 17 apartments Unbundling OUTSIDE the building or INSIDE the basement Options: - 1 fibre/apartment

More information

MPO LGX Cassette Module

MPO LGX Cassette Module DATASHEET Product updated on March 13, 2018 MPO LGX Cassette Module MPO LGX Cassette Modules provide secure transition between MPO and LC or SC discrete connectors. They are used to interconnect MPO backbones

More information

Racks. IP41 RS3000 Rack RAL7038. Features and Benefits. Prysmian Part Numbers: See below. Kit Contents. Additional Items Recommended

Racks. IP41 RS3000 Rack RAL7038. Features and Benefits. Prysmian Part Numbers: See below. Kit Contents. Additional Items Recommended IP41 RS3000 Rack RAL7038 Prysmian Part Numbers: See below Features and Benefits The rack can accommodate the range of SRS3000 shelves and sub-racks. Please note that other 19 rack mounted products and

More information

Optimux-108, Optimux-106 Four-Channel E1/T1 and Ethernet Multiplexers

Optimux-108, Optimux-106 Four-Channel E1/T1 and Ethernet Multiplexers Data Sheet Optimux-108, Optimux-106 Fiber Multiplexers, Transmit Any Traffic over Fiber Four E1 or T1 channels and Fast Ethernet link multiplexed over a fiber optic link Various fiber interfaces: multimode,

More information

FC Type Connector. Standards YD/T IEC GR-326-CORE

FC Type Connector. Standards YD/T IEC GR-326-CORE FC Type Connector Product Introduction Optical Fiber Jumper is the cable with a connector installed on its each end respectively to make the jumping connection of light path. Features Standard metal parts,

More information

Specification for Dispersion Slope Compensating Module for LEAF Transmission Fiber LEAF-DK

Specification for Dispersion Slope Compensating Module for LEAF Transmission Fiber LEAF-DK Specification for Dispersion Slope Compensating Module for LEAF Transmission Fiber LEAF-DK Version 1.4 2013-03-18 1 Ordering information Order code format: LEAFDK-S-xxx-yy-zz Mechanical option Connector

More information

Proteus Node Return Digital Transmitter with Ethernet

Proteus Node Return Digital Transmitter with Ethernet Optoelectronics Proteus Node Return Digital Transmitter with Ethernet Description The Proteus Node Return Digital Transmitter with Ethernet is a digital, return path transmitter that has the capability

More information

Optical Fiber Communications. Optical Networks- unit 5

Optical Fiber Communications. Optical Networks- unit 5 Optical Fiber Communications Optical Networks- unit 5 Network Terminology Stations are devices that network subscribers use to communicate. A network is a collection of interconnected stations. A node

More information

Plexxi LightRail White Paper

Plexxi LightRail White Paper White Paper CWDM and Limited Fiber Plant Installations Introduction This document contains information about using the CWDM capabilities of the Plexxi Switch hardware & Control software components within

More information

Specification for Dispersion Slope Compensating Module for SMF Transmission Fiber SMF-DK

Specification for Dispersion Slope Compensating Module for SMF Transmission Fiber SMF-DK Specification for Dispersion Slope Compensating Module for SMF Transmission Fiber SMF-DK Version 1.45 2017-04-28 0 Ordering information Order code format: SMFDK-S-xxx-yy-zz Mechanical option Connector

More information

Dual & Single Fiber CWDM Mux & Demux

Dual & Single Fiber CWDM Mux & Demux Data Center & Cloud Computing DATASHEET Dual & Single Fiber CWDM Mux & Demux Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2018 01 1 Introduction FS.COM designs and offers all types of

More information

Increasing Fiber Capacity with CWDM

Increasing Fiber Capacity with CWDM Increasing Fiber Capacity with CWDM A Tutorial on CWDM Network Design Presented by: Greg Scott MSO/Telecom Sales Increasing Fiber Capacity with CWDM Introduction WDM Technology Overview CWDM and Fiber

More information

Telecom Engineering DWDM/CWDM Lite Manual

Telecom Engineering DWDM/CWDM Lite Manual Telecom Engineering DWDM/CWDM Lite Manual Features: 4-80 channel DWDMs or 4-16 channel CWDMs Easy to install, requires no configuration Environmentally friendly product, completely passive, no power and

More information

Siemon PON Fiber Cabling Solutions

Siemon PON Fiber Cabling Solutions Siemon PON Fiber Cabling Solutions WWW.SIEMON.COM 8 Siemon Enterprise PON Fiber Cabling Solution Siemon Enterprise Passive Optical Network (PON) Fiber Cabling Solution improves the modularity, flexibility

More information

MICROSENS. Modular CWDM/DWDM-Multiplexer System. Introduction

MICROSENS. Modular CWDM/DWDM-Multiplexer System. Introduction Modular CWDM/DWDM-Multiplexer System MICROSENS Introduction Increasing bandwidth requirements resulted from rising amount of transferred data leads inevitably to the higher demand for the backbone capacities.

More information

LSX Optical Distribution Frame

LSX Optical Distribution Frame LSX Optical Distribution Frame Introduction...79 Things to Consider When Ordering...80 Fiber Distributing Frame...81 Preterminated Fiber Termination Panels with Multifiber Cable-IFC..82 Adapter-Only Fiber

More information

- 128 x Gigabit Ethernet connections - 32 x 4G Fibre Channel connections - 8 x 8G Fibre Channel connections - down to 2 Mbps

- 128 x Gigabit Ethernet connections - 32 x 4G Fibre Channel connections - 8 x 8G Fibre Channel connections - down to 2 Mbps Active WDM Company Introduction SmartOptics designs and markets all types of fibre optical transmission products. Headquarted in Oslo, Norway, we serve Storage, Data and Telecom Networks worldwide with

More information

OAsys. SRS3000 1U Splice and Patch Shelf. Rack Mounted Products. Features and Benefits. Prysmian Part Number: See table on following pages.

OAsys. SRS3000 1U Splice and Patch Shelf. Rack Mounted Products. Features and Benefits. Prysmian Part Number: See table on following pages. SRS3000 1U Splice and Patch Shelf Prysmian Part Number: See table on following pages. The SRS3000 Splice and Patch Shelf is a modular unit available in a variety of configurations for integration in to

More information

A Division of Castle Microwave. Fibre Products.

A Division of Castle Microwave. Fibre Products. A Division of Castle Microwave Fibre Products www.castlemicrowave.com www.castlecables.co.uk Interconnect Products Global No 1 supplier in quantity for LC Product. Standard Connectors & Adapters Small

More information

Optimux-34, Optimux-25

Optimux-34, Optimux-25 Data Sheet Optimux-34, Optimux-25 16-Channel E1/T1, Ethernet or Data over E3 or Fiber Multiplexers Up to 16 E1/T1 links and high-speed data or Ethernet traffic multiplexed into fiber opt7ic uplink E3 copper

More information

Section 28 Fiber Optics: Fiber Distribution Cabinets and Accessories

Section 28 Fiber Optics: Fiber Distribution Cabinets and Accessories Fiber Optics: Section 28 Section 28 Fiber Optics: Fiber Distribution Cabinets and Accessories Table of Contents Page COYOTE Axcess Solutions COYOTE Pre-Terminated Cabinets Wall Mount...28-2 Rack Mount...28-2

More information

WaveReady. Optical Link Monitoring System: BrightJack 200ER

WaveReady. Optical Link Monitoring System: BrightJack 200ER WaveReady Optical Link Monitoring System: BrightJack 200ER www.lumentum.com Data Sheet The Lumentum WaveReady BrightJack 200ER is a compact, modular performance monitoring solution for optical fiber links.

More information

Optimux-1553 STM-1/OC-3 Terminal Multiplexer

Optimux-1553 STM-1/OC-3 Terminal Multiplexer Data Sheet Optimux-1553 STM-1/OC-3 terminal multiplexer for grooming high order legacy traffic (TDM) over SDH/SONET networks Any Traffic Over Fiber Multiplexes up to three E3 or T3 data channels using

More information

Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications

Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications Data Sheet Cisco Small Form-Factor Pluggable Modules for Gigabit Ethernet Applications The industry-standard Cisco Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable input/output

More information

Compact Optical Splitter Module for FTTH Outside Plant

Compact Optical Splitter Module for FTTH Outside Plant Compact Optical Splitter Module for FTTH Outside Plant Norihiro Momotsu, 1 and Kazuya Ogata 1 Passive Optical Network (PON) system has expanded extensively as an optical network in the construction of

More information

Application Note Fiber Connectivity

Application Note Fiber Connectivity Riedel Application solutions Note for - Fiber broadcast Connectivity applications 1 Content Fiber Basics Riedel Portfolio Application examples 2 Fiber Cable Propagation Modes Multi-mode Multiple modes

More information

DATA CENTER SOLUTIONS

DATA CENTER SOLUTIONS DATA CENTER SOLUTIONS MTP Cabling Solutions MTP Cassette Solutions MTP Distribution Center Solutions Aqua 10 (OM3) Gigabit Patchcords Tera Flow Single Mode Bend Insensitive Patchcords Fiber Optic Taps

More information

Passive Optical Components An Evolant Solutions Product

Passive Optical Components An Evolant Solutions Product Description offers a full line of passive optical component products that is specially designed for our complete fiber optic hardware portfolio to allow maximum network flexibility. Available components

More information

Optical Networking. Applications

Optical Networking. Applications Applications Allied Telesis Gigabit through 40G optical transport solutions empower IP/Ethernet service providers with a solution that leverages a common family of products and technologies from the customer

More information

Standard-Area Silicon PIN Photodiodes (500µm)

Standard-Area Silicon PIN Photodiodes (500µm) Standard-Area PD-LD Inc. offers a variety of standard and custom PIN Photodiodes and APDs in fiber coupled packages. The semiconductors offered are of proven manufacture and design. Our Silicon devices

More information

MX Ring. WDM - MUX/DeMUX. MUX/DeMUX. Features Full native mode performance Optical connectors Passive model requires no power.

MX Ring. WDM - MUX/DeMUX. MUX/DeMUX. Features Full native mode performance Optical connectors Passive model requires no power. WDM - MUX/DeMUX MX20-3155 Dual Channel WDM MUX/DeMUX 5 MX20-3155 is a dual channel, passive, protocol transparent, WDM multiplexer/demultiplexer which utilizes two popular WDM lambda channels of 1310nm

More information

FIBER OPTIC SPLITTERS

FIBER OPTIC SPLITTERS FIBER OPTIC SPLITTERS turksat.com.tr SPLITTERS FIBER OPTIC SPLITTERS SPLITTERS FEATURES APPLICATION» Optical performance 100% factory tested» Fiber to the home (FTTH)» UPC, and APC polish types available

More information

Introduction. Coarse Wave Division Multiplexing Solution

Introduction. Coarse Wave Division Multiplexing Solution Coarse Wave Division Multiplexing Solution Introduction World Wide Packets LightningEdge Coarse Wave Division Multiplexing (CWDM) solution presents service providers with a way to selectively increase

More information

Complex networks in Plug & Play

Complex networks in Plug & Play tml tde Modular Link System Complex networks in Plug & Play tml tde Modular Link System The number of network connections in a Data Center is increasing constantly, due to the ever greater demands made

More information

MPO LGX Cassette Module

MPO LGX Cassette Module DATASHEET Product updated on November 19, 2018 MPO LGX Cassette Module MPO LGX Cassette Modules provide secure transition between MPO and LC or SC discrete connectors. They are used to interconnect MPO

More information

OPCOM100 series CWDM System

OPCOM100 series CWDM System Datasheet OPCOM100 Series CWDM System OPCOM100 series are Raisecom's Coarse Wavelength Division Multiplexing devices. The CWDM product line is developed and designed for fully utilizing the existing fiber

More information

SIN 510 Issue 1.1 August 2016

SIN 510 Issue 1.1 August 2016 SIN 510 Issue 1.1 August 2016 Suppliers' Information Note For The BT Network Openreach Time Division Multiplex (TDM) Backhaul Bearer Service Service & Interface Description Each SIN is the copyright of

More information

Smart Network Access System

Smart Network Access System The Smart Network Access System from Network Critical allows you to deploy all of your appliances risk-free in your network infrastructure while ensuring complete visibility of all traffic flowing on your

More information