Hardware-In-Loop Test Setup Automation
|
|
- Paul Fletcher
- 6 years ago
- Views:
Transcription
1 ECU Software Validation using Hardware-In-Loop Test Setup Automation Shrirang Agashe Eaton Technologies Pvt. Ltd. EON Free Zone, Cluster C, Wing 1, MIDC, Kharadi, Pune Oct-12
2 Need for Hardware In Loop Test Setup VALIDATION To demonstrate that the product fulfills its intended use when placed in its intended environment. Need For ECU S/W VALIDATION (In Vehicle Testing): 1. Increase Software Reliability (Safety) 2. Decrease Warranty Claims HIL System plays key Role in Software VALIDATION. The key benefits are: 1. Expedite VALIDATION Process 2. Reduce In Vehicle testing Resources (Test Tracks, Vehicles, Man Power) 3. Regression Testing for Different Software Versions HIL System Provides the Simulated / Virtual Intended Environment for VALIDATION of S/W in ECU Under Test 2 2
3 HIL System Components 1. ECU Under Test: Holds S/W To Be Tested 2. Power Supplies: Provides VBATT & GND to all electrical components 3. Real Time Computer: Simulation of ECU Environment (Plant Models) 4. Signal Generation & Measurement Cards: Electrical Interface 5. ECU Harness: Electrical Connections 6. Communication Cards: Simulate the messaging with other ECUs 7. Simulated Loads: Current Sink 8. Fault Insertion Unit: Electrical Diagnostics 9. Host PC: Operator / Environment Inputs, Static linking between RTPC, I / O Cards, Communication Cards 3 3
4 H I L S y s t e m I l l u s t r a t i o n 1 : W i n d s h i e l d Wiper Requirement: The wiper should turn on when wiper switch is pressed. Also wiper should turn off when wiper switch is pressed and wiper has reached its parking position. Controller Environment Intermediate Position Input Input Wiper Switch Input Wiper Motor Wiper Motor Limit switch Plant Model Parking Position Wiper Parking position Limit Switch 4 4
5 HIL System Illustration 1: Windshield Wiper Continued Controller Wiper Motor Electrical PWM / ADC In Card Input RTPC (Simulated Plant) Intermediate Position Wiper S/W Electrical Input Parking S/W Electrical Input Parking Position Digital Out Card Wiper Parking position Limit Switch Host PC GUI Wiper Switch Ethernet Link RTPC Wiper Switch 5 5
6 HIL System Illustration 2: Transmission Control Module (Auto Transmission) HIL System Fault Insertion Unit Electrical Diagnostics Signal Measurement Cards Plant Model 1. Engine 2. Transmission Dynamics 3. Driveline l Generation Cards Signal Electrical Loads Speed Sensors TCM 4. Brakes Actuators: Information of Commanded Gear Electrical Loads Host PC: 1. Driver Demand 2. Road Characteristics 6 6
7 Plant Model Design 1. Layout of Model: Input Interface, Plant Model, Interface. Overrides for functional diagnostics. 2. CAN message Interface: Compatibility between MIL and HIL Models 3. Modular Components: Reusability of standard components 4. Configuration Parameters: Managing different variants 5. Modeling Conventions / Guidelines: Common understanding and maintenance 7 7
8 HIL Setup Automation And Benefits Automation Framework should include: 1. Execution (20%) a. Open Loop and Closed Loop b. Variables to be logged: logging rate c. Safe exit in case of error d. Library Functions for common execution scenario / fault injections 2. Data Analysis (80%) a. Reading the data log files b. Pass / Fail Criteria Benefits of HIL Automation: 1. In Vehicle testing time a. Availability of the test tracks: In lab testing can be done 24 hours b. Time for making the connections for data logging, communication 2. Repeatability in the execution. Test scenario execution is driver independent. 3. Regression Testing: Intermediate releases of software can also be tested. 4. Test Coverage: Same software can be tested on all the variants of the vehicle 5. For diagnostic testing, the FIU can inject the faults with 10 ms timing accuracy. This is impossible in actual vehicle. 6. Exhaustive data capturing, recording and reporting. 7. Consistency in the pass / fail criteria: It is not open to discretion of any person s engineering decision. 8 8
Formal Verification and Automatic Testing for Model-based Development in compliance with ISO 26262
Formal Verification and Automatic Testing for Model-based Development in compliance with ISO 26262 Is your software safe? Do you have evidence? 2 BTC Embedded Systems AG proprietary all rights reserved
More informationVT System Smart HIL Testing
VT System Smart HIL Testing V1.0 2010-06-04 Agenda > ECU Testing Testing a Door Control Unit Summary and Outlook Slide: 2 ECU Testing I/O Access for ECU Testing ECU has to be tested in its natural environment
More informationOpen, Scalable Real-Time Solutions
Open, Scalable Real-Time Solutions Introducing TestDrive ECU-in-the-Loop Testing Q & A Alan Soltis Applications Engineer TestDrive Simulator An Overview Compact, robust chassis Pentium 4
More informationEuropean Conference on Nanoelectronics and Embedded Systems for Electric Mobility. HIL platform for EV charging and microgrid emulation
European Conference on Nanoelectronics and Embedded Systems for Electric Mobility emobility emotion 25-26 th September 2013, Toulouse, France HIL platform for EV charging and microgrid emulation Salvador
More informationRear Drive Axle and Differential
Published: Mar 30, 29 Drive Axle and Differential Principle of Operation For additional, refer to section 205-02 - Drive Axle/Differential of the workshop manual. Inspection and Verification 1. Verify
More informationMULTIFUNCTION AIRCRAFT FLIGHT SURFACE BETTER AVIONICS VERIFICATION TOOL ELECTRONIC CONTROL UNIT TEST SYSTEM: A. Project Goals
MULTIFUNCTION AIRCRAFT FLIGHT SURFACE ELECTRONIC CONTROL UNIT TEST SYSTEM: A BETTER AVIONICS VERIFICATION TOOL Modern avionics exemplify safety and mission-critical, dependable systems. These systems continue
More informationPRODUCT SERVICE INFORMATION
PRODUCT SERVICE INFORMATION Document number: P0019 For further technical information regarding testing, repairs or to search for New or Remanufactured Automotive electronic products, please visit www.injectronics.com.au,
More informationFailure Diagnosis and Prognosis for Automotive Systems. Tom Fuhrman General Motors R&D IFIP Workshop June 25-27, 2010
Failure Diagnosis and Prognosis for Automotive Systems Tom Fuhrman General Motors R&D IFIP Workshop June 25-27, 2010 Automotive Challenges and Goals Driver Challenges Goals Energy Rising cost of petroleum
More informationTechnical Service Bulletin
Page 1 of 13 Technical Service Bulletin SUBJECT: TC SST TRANSMISSION GEAR NOISE AFTER COLD ENGINE START (2009 2010 MODELS) REVISED No: DATE: July, 2016 MODEL: See below CIRCULATE TO: [ ] GENERAL MANAGER
More informationVirtual Hardware ECU How to Significantly Increase Your Testing Throughput!
Virtual Hardware ECU How to Significantly Increase Your Testing Throughput! Elektrobit Tech Day Jason Niatas Synopsys Inc. July 27, 2017 2017 Synopsys, Inc. 1 Agenda Automotive electronic evolution and
More informationReal-Time Hardware-In-Loop simulation for automated validation of diagnostic services
Speakers Information- Controls, Measurement & Calibration Congress Real-Time Hardware-In-Loop simulation for automated validation of diagnostic services Charu Garg, Amit Kumar, Ajay Kumar Vashisth ABSTRACT
More informationModel Based Systems Engineering Engine Control: from concept to validation. Jan Smolders Technical Account Manager
Model Based Systems Engineering Engine Control: from concept to validation Jan Smolders Technical Account Manager Table of Content Model Driven Development MiL SiL HiL Model adaptation to Real-Time Towards
More informationVirtual ECUs for Developing Automotive Transmission Software Dr. Thomas Liebezeit 1, Jakob Bräuer 1, Roland Serway 1, Dr. Andreas Junghanns 2 1 IAV GmbH, Carnotstraße 1, 10587 Berlin 2 QTronic GmbH, Alt-Moabit
More informationMongoose Pro GMII Quick Start Guide
Mongoose Pro GMII Quick Start Guide PLEASE NOTE Mongoose Pro interfaces have been carefully designed and tested to comply with OBDII protocols. However, some vehicle models are not in full compliance with
More informationController Calibration using a Global Dynamic Engine Model
23.09.2011 Controller Calibration using a Global Dynamic Engine Model Marie-Sophie Vogels Johannes Birnstingl Timo Combé CONTENT Introduction Description of Global Dynamic Model Concept Controller Calibration
More informationReal-Time HIL Simulation Tools Optimize Automotive Chassis Control System Development
Real-Time HIL Simulation Tools Optimize Automotive Chassis Control System Development Software now accounts for more than one-third of total automobile production costs Driving the trend is embedded software
More informationDecoupling Test Cases from Real and Virtual Test Systems with ASAM HIL API
Decoupling Test Cases from Real and Virtual Test Systems with ASAM HIL API Dr. Rainer Rasche, dspace GmbH Dr. Dietmar Neumerkel, Daimler AG Workshop der ASIM/GI-Fachgruppen Simulation technischer Systeme
More informationMongoose Pro Quick Start Guide
Mongoose Pro Quick Start Guide PLEASE NOTE Mongoose Pro interfaces have been carefully designed and tested to comply with OBDII protocols. However, some vehicle models are not in full compliance with these
More informationMANUAL FOR SEDEMAC - SMART
ABSTRACT This manual is intended as SOP for PC-windows based application software for configuring SEDEMAC s controllers MANUAL FOR SEDEMAC - SMART Doc #SED-MAN-GUI-001 Date: 7-Mar-2018 CONFIG PRODUCT MANUAL
More informationVolvo Car Group Jonn Lantz Agile by Models
Volvo Car Group Jonn Lantz Agile by Models Challenge Scaling agile model driven development of AUTOSAR embedded software. Lift the abstraction level of in-house development. Create reliable, automated
More informationPlant Modeling for Powertrain Control Design
Plant Modeling for Powertrain Control Design Modelica Automotive Workshop Dearborn, MI November 19, 2002 Dr. Larry Michaels GM Powertrain Controls Engineering Challenges in PT Control Design Control System
More informationArchitecture concepts in Body Control Modules
Bitte decken Sie die schraffierte Fläche mit einem Bild ab. Please cover the shaded area with a picture. (24,4 x 11,0 cm) Course 7 www.continental-corporation.com Interior Body and Security Table Of Contents
More informationExtensive Test of Heavy-Machinery ECU on a NI VeriStand HiL using TestWeaver
Extensive Test of Heavy-Machinery ECU on a NI VeriStand HiL using TestWeaver Dr. Thomas Neubert, Hydrive Engineering GmbH Dr. Mugur Tatar, QTronic GmbH 1 Introduction 2 Software Test Strategies 3 New Test
More informationTools and Methods for Validation and Verification as requested by ISO26262
Tools and for Validation and Verification as requested by ISO26262 Markus Gebhardt, Axel Kaske ETAS GmbH Markus.Gebhardt@etas.com Axel.Kaske@etas.com 1 Abstract The following article will have a look on
More informationVerification, Validation, and Test with Model-Based Design
2008-01-2709 Verification, Validation, and Test with Model-Based Design Copyright 2008 The MathWorks, Inc Tom Erkkinen The MathWorks, Inc. Mirko Conrad The MathWorks, Inc. ABSTRACT Model-Based Design with
More informationFrom Design to Production
From Design to Production An integrated approach Paolo Fabbri Senior Engineer 2014 The MathWorks, Inc. 1 Do you know what it is? Requirements System Test Functional Spec Integration Test Detailed Design
More informationEntwicklung zuverlässiger Software-Systeme, Stuttgart 30.Juni 2011
Entwicklung zuverlässiger Software-Systeme, Stuttgart 30.Juni 2011 Tools and Methods for Validation and Verification as requested by ISO26262 1 Introduction ISO26262 ISO 26262 is the adaptation of IEC
More informationTesting for the Unexpected Using PXI
Testing for the Unexpected Using PXI An Automated Method of Injecting Faults for Engine Management Development By Shaun Fuller Pickering Interfaces Ltd. What will happen if a fault occurs in an automotive
More informationTools for CAN based networking. On the street, in the air, in the orbit
Tools for CAN based networking On the street, in the air, in the orbit Vector Informatik GmbH Vector provides OEMs and suppliers of automotive and related industries a professional and open development
More informationSoftware Architecture. Definition of Software Architecture. The importance of software architecture. Contents of a good architectural model
Software Architecture Definition of Software Architecture Software architecture is process of designing g the global organization of a software system, including: Dividing software into subsystems. Deciding
More informationFUNCTIONAL SAFETY FOR INDUSTRIAL AUTOMATION
FUNCTIONAL SAFETY FOR INDUSTRIAL AUTOMATION 2017.11 The term Functional Safety has become a topic of great interest. Functional Safety generally means that malfunctions of the operating systems or applications
More informationObject Fusion for an Advanced Emergency Braking System (AEBS) Jonny Andersson
Object Fusion for an Advanced Emergency Braking System (AEBS) Agenda 1. Rear- end collisions & EU legislation 2. How the AEB system works 3. Object fusion methods 4. Simulink implementation 5. Sensor visualisation
More informationReal Time Testing of PMSM Controller using xpc Target Turnkey solution
Real Time Testing of PMSM Controller using xpc Target Turnkey solution August 08, 2012 Prasanna Deshpande Application Engineering MathWorks India 2012 The MathWorks, Inc. 1 What is real time testing Rapid
More informationReuse of Hardware Independent Test Sequences across MiL-, SiL- and HiL-Test Scenarios
Reuse of Hardware Independent Test Sequences across MiL-, SiL- and HiL-Test Scenarios Testing Expo 2008 Stuttgart Berner & Mattner Systemtechnik GmbH Contents Test methods in the automotive industry Problems
More informationmobydic 4910 Multiprotocol ECU Simulator v1.01 Features
Features Simulates a single or 4 different ECU's ( PCM,TCM,HEC,ABS) Selectable protocol via dip switch Selectable Gasoline / Diesel PID's Advanced monitoring / Readiness functions Generates DTC for each
More information10 th AUTOSAR Open Conference
10 th AUTOSAR Open Conference Dr. Moritz Neukirchner Elektrobit Automotive GmbH Building Performance ECUs with Adaptive AUTOSAR AUTOSAR Nov-2017 Major market trends and their impact Trends Impact on E/E
More informationTroubleshooter Quick Reference Guide
Troubleshooter Quick Reference Guide March 2008 EAZ0025B29B Rev. C Trademarks Acknowledgement Snap-on, Scanner, and Fast-Track are trademarks of Snap-on Incorporated. All other marks are trademarks of
More informationMATLAB Expo Simulation Based Automotive Communication Design using MATLAB- SimEvent. Sudhakaran M Anand H General Motors
MATLAB Expo 2013 Simulation Based Automotive Communication Design using MATLAB- SimEvent Sudhakaran M Anand H General Motors 1 Agenda Introduction Different Analysis Methods Analytical vs. Simulation Approach
More informationDevelopment and Deployment of ECU based Control Systems through MBD. Imperative role of Model based design in System Engineering
Development and Deployment of ECU based Control Systems through MBD Imperative role of Model based design in System Engineering Outline Scope of Work Problem Definition Solution System Engineering Model
More informationCertified Automotive Software Tester Sample Exam Paper Syllabus Version 2.0
Surname, Name: Gender: male female Company address: Telephone: Fax: E-mail-address: Invoice address: Training provider: Trainer: Certified Automotive Software Tester Sample Exam Paper Syllabus Version
More informationPREEvision Technical Article
PREEvision Technical Article AUTOSAR-Conformant Vehicle Diagnostics over : Developing Diagnostic Communications for E/E Systems The electronically controlled systems of modern vehicles are networked with
More informationExplorer V1.20. Features
V1.20 Multi-function USB I/O Expander and Controller Features Dual h-bridge 1.3A motor drive with PWM speed control 4.6V to 10.8V input range USB communication 4x digital inputs 2x analogue inputs 7x 100mA
More informationDRYING CONTROL LOGIC DEVELOPMENT USING MODEL BASED DESIGN
DRYING CONTROL LOGIC DEVELOPMENT USING MODEL BASED DESIGN Problem Definition To generate and deploy automatic code for Drying Control Logics compatible with new SW architecture in 6 months using MBD, a
More informationPartitioned Control Challenge Problem
Partitioned Control Challenge Problem Introduction The lack of model-based tools to analyze and implement the distribution of software functionality between multiple targets is a problem faced in the automotive
More informationGoals and prospects of embedded electronic automotive systems
Goals and prospects of embedded electronic automotive systems Joseph Beretta Division of Research and Automotive Innovation Manager Automotive Science & Advance Research Electromechanically, Electrochemistry,
More informationFault-Injection testing and code coverage measurement using Virtual Prototypes on the context of the ISO standard
Fault-Injection testing and code coverage measurement using Virtual Prototypes on the context of the ISO 26262 standard NMI Automotive Electronics Systems 2013 Event Victor Reyes Technical Marketing System
More informationAdvanced Driver Assistance: Modular Image Sensor Concept
Vision Advanced Driver Assistance: Modular Image Sensor Concept Supplying value. Integrated Passive and Active Safety Systems Active Safety Passive Safety Scope Reduction of accident probability Get ready
More informationLION SAFE Remote I/O System. LÜTZE TRANSPORTATION GMBH Dimitrios Koutrouvis V00
Page 1 LÜTZE TRANSPORTATION GMBH Dimitrios Koutrouvis V00 Actual Market Situation New Safety Requirements from Standards and Authorities Governance European Union (EU) ==> European Railway Agency (ERA)
More information12/2013. Installation Guide & User Manual
12/2013 Installation Guide & User Manual ABOUT THIS MANUAL This manual has been written to help you understand all the functions and capabilities of the Yamaha Snowmobile Diagnostic Tool in order to gain
More informationFactory HIL Hardware in the Loop
Factory HIL Hardware in the Loop The Factory HIL provides a way of simulating the complete functionality of an F1 race car. I/O and simulation models are provided to drive the F1 Standard ECU components
More informationThe Safe State: Design Patterns and Degradation Mechanisms for Fail- Operational Systems
The Safe State: Design Patterns and Degradation Mechanisms for Fail- Operational Systems Alexander Much 2015-11-11 Agenda About EB Automotive Motivation Comparison of different architectures Concept for
More informationOTA-On-Demand (OOD) Services with AGL
Automotive Linux Summit 2018 June 20-22, 2018, Tokyo, Japan OTA-On-Demand (OOD) Services with AGL Stefan Aust Manager NEC Communication Systems, Ltd. 1 NEC Corporation 2018 Content 1. Self-introduction
More informationInitial quick test log
Initial quick test log Model series C (204) / 204.303 MB workshop - - Vehicle identification number WDD2043032F717487 Steering variant Right-hand drive vehicle Main odometer reading 86800km Software-Version
More informationNational Instruments Approach
National Instruments Approach Our graphical programming software, LabVIEW, and modular, open hardware, has redefined how engineers work throughout the entire product design cycle. Committed to Engineers
More informationAUTOSAR stands for AUTomotive Open Systems ARchitecture. Partnership of automotive Car Manufacturers and their Suppliers
Introduction stands for AUTomotive Open Systems ARchitecture Electronic Control Unit Partnership of automotive Car Manufacturers and their Suppliers Source for ECU: Robert Bosch GmbH 2 Introduction Members
More informationMOTO M -1 Use s r manu n al
MOTO-1 User manual Operate introduction Dear user Your purchased tool is belong to the MOTO-1 series, it cover all our technology and experience in many years. The tool will be a very useful work partner
More informationAutomobile Design and Implementation of CAN bus Protocol- A Review S. N. Chikhale Abstract- Controller area network (CAN) most researched
Automobile Design and Implementation of CAN bus Protocol- A Review S. N. Chikhale Abstract- Controller area network (CAN) most researched communication protocol used for automotive industries. Now we are
More informationIncreasing Design Confidence Model and Code Verification
Increasing Design Confidence Model and Code Verification 2017 The MathWorks, Inc. 1 The Cost of Failure Ariane 5 $7,500,000,000 Rocket & payload lost 2 The Cost of Failure USS Yorktown 0 Knots Top speed
More informationTechnical Service Bulletin
"01 Cold engine runs rough or stumbles; warm engine may stall when engaging gear and vehicle is stationary" 24 08 57 2010890/8 November 19, 2008. Supersedes Technical Service Bulletin Group 24 number 08-23
More informationCybersecurity Challenges for Connected and Automated Vehicles. Robert W. Heller, Ph.D. Program Director R&D, Southwest Research Institute
Cybersecurity Challenges for Connected and Automated Vehicles Robert W. Heller, Ph.D. Program Director R&D, Southwest Research Institute Cars are becoming complex (and CAV is only part of it) 1965: No
More informationAdvanced AC Motor Control S/W Development Sang-Ho Yoon Senior Application Engineer The MathWorks
Advanced AC Motor Control S/W Development Sang-Ho Yoon Senior Application Engineer The MathWorks 2012 The MathWorks, Inc. 1 Agenda Develop ECUs with Model-Based Design Generate Application Code for Prototyping
More informationAdditions, Revisions, or Updates
10 20-13 1 10 20-13 SUBJECT DATE SPN 1071/FMI 3,4,5 - EPA10 - GHG14 (MCM) October 2013 Additions, Revisions, or Updates Publication Number / Title Platform Section Title Change DDC-SVC-MAN-0084 DD Platform
More informationTable of Contents 1. Overview Installation...6
(2003-01-31) Table of Contents 1. Overview...1 1.1. Introduction... 1 1.2. Product Description... 1 1.2.1. Mechanical Actuator Assembly with M2CP Electrical Enclosure... 1 1.2.2. Variable Frequency Controller
More informationTechno Expert Solutions An institute for specialized studies! Introduction to Advance QTP course Content
Introduction to Advance QTP course Content NTRODUCTION TO AUTOMATION Automation Testing Benefits of Automation Testing Automation Testing Vs Manual Testing Automation Test Tools Tool selection criteria
More informationINSTRUMENT CLUSTER 2.0
INSTRUMENT CLUSTER 2.0 Summary THE CONTEXT Electronic Content Timeline The Challenge MAGNETI MARELLI TARGET Digital Cluster Advantages The Requirements THE SOLUTION Project Definition System PROJECT DEVELOPEMENT
More informationLabVIEW FPGA in Hardware-in-the-Loop Simulation Applications
LabVIEW FPGA in Hardware-in-the-Loop Simulation Applications Publish Date: Dec 29, 2008 38 Ratings 4.16 out of 5 Overview Hardware-in-the-loop (HIL) simulation is achieving a highly realistic simulation
More informationNew developments about PL and SIL. Present harmonised versions, background and changes.
Safety evevt 2017 Functional safety New developments about PL and SIL. Present harmonised versions, background and changes. siemens.com ISO/ TC 199 and IEC/ TC 44 joint working group 1 - Merging project
More informationPower management Driving smart power in automotive
management Driving smart power in automotive Voltage regulators management (SBC) Electronic control units (ECUs), gateways, and body modules represent innovative electronic solutions for automotive applications
More informationDEMO. The Professional Software Suite for Automatic Control Design and Forecasting. EICASLAB Demo RT-emb
TM EICASLAB DEMO The Professional Software Suite for Automatic Control Design and Forecasting EICASLAB Demo RT-emb EICASLAB Demo RT-emb Just 1 Software Suite Just 1 Project ALL the design phases The operative
More informationDesigning a software framework for automated driving. Dr.-Ing. Sebastian Ohl, 2017 October 12 th
Designing a software framework for automated driving Dr.-Ing. Sebastian Ohl, 2017 October 12 th Challenges Functional software architecture with open interfaces and a set of well-defined software components
More informationEffective Verification Strategies for Distributed Body Control Applications based on Plant Modeling and Test Case Reuse
Effective Verification Strategies for Distributed Body Control Applications based on Plant Modeling and Test Case Reuse Jinming Yang, Jason Bauman Lear Corporation April 27, 2010 Introduction Challenges
More informationApplications & Tools. Technology CPU 317TF-2 DP: Example for determining the Safety Integrity Level (SIL) according to IEC
Cover Technology CPU 317TF-2 DP: Example for determining the Safety Integrity Level (SIL) according to IEC 62061 Technology CPU Application Description January 2013 Applications & Tools Answers for industry.
More informationDevelopment Progress and OEM Perspective of C-V2X in China
Development Progress and OEM Perspective of C-V2X in China Dr. Xiang Dang (ABM) Deputy General Manager Research& Advanced Technology Department SAIC MOTOR 1 C-V2X Development Progress in China 2 OEM s
More informationAutomotive Systems Technology
Automotive Systems Technology The curriculum prepares individuals for employment as Automotive Service Technicians. It provides an introduction to automotive careers and increases student awareness of
More informationService Technical Resources MUT-III. (Multi-Use Tester-III*) Quick Reference Guide
Service Technical Resources MUT-III (Multi-Use Tester-III*) Quick Reference Guide *Cart not included May, 2003 INTENDED USAGE OF MUT-III MUT-II role after MUT-III Launch MUT-III is an essential special
More informationDesigning Real-Time Control Applications Using LabVIEW and CompactRIO. Developer Days 2009
Designing Real-Time Control Applications Using LabVIEW and CompactRIO Developer Days 2009 Agenda CompactRIO Overview Technology Applications Real-Time Control Software Architecture Basic Process Control
More informationSCALEXIO. New technologies for HIL simulation.
SCALEXIO New technologies for HIL simulation www.dspace.com Introduction / SCALEXIO SCALEXIO New technologies for HIL simulation Highlights Versatility for different test tasks High channel and system
More informationDelphi Diagnostics DS100E user manual version 7.0 Software Version
Delphi Diagnostics DS100E user manual version 7.0 Software Version 1.17.0 1. Summary 1 Summary 2 Copyright/Trademark 3 About the DS100E 4 Main functions of the DS100E tool 5 OBD 6 EOBD 7 Configuration
More informationKPIT S Connected Vehicle Practice
KPIT S Connected Vehicle Practice Vehicle Telematics Vehicle-to-Anything (V2X) Cybersecurity With an intent to shape up the futuristic Internet-of-Vehicles era, KPIT offers Vehicle-to-anything (V2X) solutions
More informationAutomated test of the AMG Speedshift DCT control software
Automated test of the AMG Speedshift DCT control software M. Tatar QTronic GmbH, Berlin R. Schaich, T. Breitinger Mercedes-AMG GmbH, Affalterbach 9th International CTI Symposium Berlin, 2010 Outline Motivation
More informationMicroNet TMR Control System
Product Specification 03363 (Rev. C) MicroNet TMR Control System Applications The MicroNet TMR (triple modular redundant) controller is a state-of-the-art digital control platform designed to reliably
More informationIntC front panel module
IntC front panel module 1 Description Front panel module is an electronic module used as an on-board computer for vehicle control systems based on Advanced System Design inten two-channel hybrid/electric
More informationID 020C: Hardware-in-Loop: System Testing Without the System
ID 020C: Hardware-in-Loop: System Testing Without the System Applied Dynamics International Marcella Haghgooie Sr. Field Applications Engineer 13 October 2010 Version: 1.2 Marcella Haghgooie Sr. Field
More informationTower Elevator Systems, Inc. Trac-Cab Rack & Pinion Industrial Elevators. 5 Levels of Safety. Higher Technology for Safety s Sake
Trac-Cab Rack & Pinion Industrial Elevators 5 Levels of Safety 5 Levels of Trac-Cab Safety 1. Positive Rack and Pinion Mechanical Connection, Engineered and Maintained to the A17.1 Elevator Code Requirement
More informationApplication. Diagnosing the dashboard by the CANcheck software. Introduction
Diagnosing the dashboard by the CANcheck software Introduction In recent years, vehicle electronics technology improved and advances day by day. A great of advanced electronic technology has been applied
More information1000BASE-T1 from Standard to Series Production
Concept Car VW I.D. Volkswagen AG 1000BASE-T1 from Standard to Series Production Enabling Next Generation Scalable Architecture Olaf Krieger (Volkswagen), Christopher Mash (Marvell) Agenda 2 Next generation
More informationIntelligent vibration monitoring.
Intelligent vibration monitoring. Diagnostic systems www.ifm.com/gb/octavis fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control systems For industrial
More informationManual# Installation Manual SDU 404. Shutdown Unit
Manual# 1100413 Installation Manual SDU 404 Shutdown Unit Installation Manual for SDU 404 ~~~ Safety/Shutdown Unit Revision 1.1 Revised March 21, 2016 Revision history: Rev. Date Description 1.0 19.02.16
More informationExperiences with CANoe-based Fault Injection for AUTOSAR
Experiences with CANoe-based Fault Injection for AUTOSAR Patrick E. Lanigan, Priya Narasimhan Electrical & Computer Engineering Carnegie Mellon University Thomas E. Fuhrman Research & Development General
More informationAutomotive ECU Design with Functional Safety for Electro-Mechanical Actuator Systems
Automotive ECU Design with Functional Safety for Electro-Mechanical Actuator Systems Kyung-Jung Lee, Young-Hun Ki, and Hyun-Sik Ahn Abstract In this paper, we propose a hardware and software design method
More informationPassThru CAN. User s Manual
PassThru CAN Programming of Emission Related Control Units With PassThru Programming System SAE J2534 Compliant User s Manual Foreword This manual explains operating procedures and other related
More informationIDS SAS. Station Automation System for Complex Applications
IDS SAS Station Automation System for Complex Applications IDS SAS The IDS SAS automation system for switchgear significantly reduces costs and efforts for the installation of secondary equipment and enables
More informationTaking the Right Turn with Safe and Modular Solutions for the Automotive Industry
Taking the Right Turn with Safe and Modular Solutions for the Automotive Industry A Time-Triggered Middleware for Safety- Critical Automotive Applications Ayhan Mehmet, Maximilian Rosenblattl, Wilfried
More informationAdditions, Revisions, or Updates
1 3 39-12 SUBJECT DATE SPN 625/FMI 2 and 9 (ACM2.1) April 2012 Additions, Revisions, or Updates Publication Number / Title Platform Section Title Change DDC-SVC-MAN-0084 MY13 DD Platform SPN 625/FMI 2
More informationResearch Article. ISSN (Print) *Corresponding author Chen Hao
Scholars Journal of Engineering and Technology (SJET) Sch. J. Eng. Tech., 215; 3(6):645-65 Scholars Academic and Scientific Publisher (An International Publisher for Academic and Scientific Resources)
More informationModeling and Simulation of Electromechanical Systems
Modeling and Simulation of Electromechanical Systems Dhirendra Singh dhirendra.singh@mathworks.in Application Engineer Vivek Raju Application Engineer 2015 The MathWorks, Inc. 1 Challenges Working with
More informationELEC 5260/6260/6266 Embedded Computing Systems
ELEC 5260/6260/6266 Embedded Computing Systems Spring 2019 Victor P. Nelson Text: Computers as Components, 4 th Edition Prof. Marilyn Wolf (Georgia Tech) Course Web Page: http://www.eng.auburn.edu/~nelsovp/courses/elec5260_6260/
More informationBy V-cubed Solutions, Inc. Page1. All rights reserved by V-cubed Solutions, Inc.
By V-cubed Solutions, Inc. Page1 Purpose of Document This document will demonstrate the efficacy of CODESCROLL CODE INSPECTOR, CONTROLLER TESTER, and QUALITYSCROLL COVER, which has been developed by V-cubed
More informationFunctional Safety made easy
Functional Safety made easy Implementation of the new Directive on machines illustrated by the example of drive monitoring The Kübler Group is one of the leaders in the position and motion sensors branch.
More informationPCB Design for Capacitance Rain Sensor
PCB Design for Capacitance Rain Sensor Danny Kang April 14, 2010 EXECUTIVE SUMMARY The definition of sensor is a device that measures a physical quantity and converts it into a signal which can be read
More information