WALL DISPLAY PRODUCT AND SAFETY INFORMATION

Size: px

Start display at page:

Download "WALL DISPLAY PRODUCT AND SAFETY INFORMATION"

Katherine McGee
6 years ago
Views:

1 PRODUCT AND SAFETY INFORMATION Informations concernant les produits et la sécurité Produkt- und Sicherheitsinformationen Información de seguridad y del producto Informazioni sul prodotto e sulla sicurezza TABLE OF CONTENTS 1. Safety and Use Information Intended Use Safety Precautions Product Safety Label Save These Instructions Trademarks FCC Statement Class A Product Contents Standard Wall Display Contents Ideaboard Contents Using the Operator s Guide CD-ROM CD-ROM Contents Minimum System Requirements Viewing the Operator s Guide Windows...9 Viewing the Operator s Guide Macintosh...9 Download the Operator s Guide Wherever there s a great meeting, you ll find 3M. TM FRANÇ AIS DEUTSCH ESPAÑ OL ITALIANO

3 PRODUCT AND SAFETY INFORMATION 1. SAFETY AND USE INFORMATION INTENDED USE Before operating this machine, please read the entire manual thoroughly. The 3M Wall Display Systems are designed, built, and tested for use indoors, using 3M lamps, 3M mount hardware, and nominal local voltages. The use of other replacement lamps, outdoor operation, or different voltages has not been tested and could damage the projector or peripheral equipment and/or create a potentially unsafe operating condition. 3M Wall Display Systems are designed to operate in a normal office environment. 16 to 29 C (60 to 85 F) 10 to 80% RH (without condensation) 0 to 1828 m (0 to 6000 feet) above sea level The ambient operating environment should be free of airborne smoke, grease, oil and other contaminants that can affect the operation or performance of the Wall Display. Use of this product in adverse conditions will void the product warranty. SAFETY PRECAUTIONS Read and understand all instructions before using. Pay particular attention to areas where this symbol is shown: WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. It may also be used to alert against unsafe practices. Note: Emphasizes important conditions or details. Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use. Never look directly into the projector lens when the lamp is on. The high pressure mercury lamp produces a strong light that could damage your eyesight. Care must be taken, as burns can occur from touching hot parts. Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged, until it has been examined by a qualified service technician. Position the cord so that it will not be tripped over, pulled or placed in contact with hot surfaces. If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat. 3

4 Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Grasp plug and pull to disconnect. To reduce the risk of electric shock, do not immerse this appliance in water or other liquids. To reduce the risk of electric shock, do not disassemble this appliance. Request a qualified technician when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is subsequently used. Connect this appliance to a grounded outlet. Keep all ventilation openings free of any obstructions. The projection lamp contains mercury. Always dispose of this lamp in a proper manner according to local regulations. Do not apply force to the projection arm. This may cause permanent damage to the unit or may cause personal injury. Do not manually open or close the projection arm while the Wall Display is in operation. The Wall Display s projection arm is motorized, and extends 36 (92 cm) from the installation while in use. Caution should be taken when operating or walking near the Wall Display. It is possible a tall person s head or an upraised hand could come in contact with the projection arm. Do not place the product in direct sunlight, near heaters or heat radiating appliances. 4 PRODUCT AND SAFETY INFORMATION

5 PRODUCT AND SAFETY INFORMATION PRODUCT SAFETY LABEL The following safety label is used on or within the 3M Wall Display to alert you to this area requiring your attention. SAVE THESE INSTRUCTIONS The information contained in this manual will help you operate and maintain your 3M Wall Display. CAUTION In some countries, the voltage is NOT stable. This appliance is designed to operate within a range of 100~240 volts, ±10 volts, but it could fail if power drops or surges of ±10 volts occur. In these high-risk areas, it is recommended to install a power stabilizer unit. 5

6 TRADEMARKS The 3M logo and 3M are registered trademarks of Minnesota Mining and Manufacturing Company. Vikuiti is a trademark of Minnesota Mining and Manufacturing Company. Microsoft, Windows, Windows NT, Word, Excel, and PowerPoint are either registered trademarks or trademarks of the Microsoft Corporation in the United States and other countries. IBM is a registered trademark of International Business Machines Corporation. Apple Macintosh and Apple PowerBook are registered trademarks of Apple Computer, Inc. Intel and Pentium are registered trademarks of Intel Corporation. Digital Light Processing is a trademark or registered trademark of Texas Instruments. ebeam, e-beam, ebeam Mouse, ebeam Moderator, ebeam Software, ImagePort and ebeam Presenter are registered trademarks of Electronics for Imaging, Inc. All other products are trademarks or registered trademarks of their respective companies. PATENTS Wall Display is protected by Utility Patent 6,179,426 and Design Patent D442,205. Other patents pending. SOFTWARE AND COPYRIGHT LICENSE AGREEMENT The software in this distribution is copyrighted and licensed by Electronics for Imaging, Inc. TECHNICAL SUPPORT Web Site: 6 PRODUCT AND SAFETY INFORMATION

7 PRODUCT AND SAFETY INFORMATION FCC STATEMENT CLASS A This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Instructions to Users This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Notice This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. EEC Statement This machine was tested against the 89/336/EEC (European Economic Community) for EMC (Electro Magnetic Compatibility) and fulfills these requirements. Video Signal Cables Double shielded coaxial cables (FCC shield cable) must be used, and the outer shield must be connected to the ground. If normal coaxial cables are used, the cable must be enclosed in metal pipes or in a similar way to reduce the interference noise radiation. Video Inputs The input signal amplitude must not exceed the specified level. (See Appendix for these levels.) 7 7

8 POWER MUTE MENU INPUT R MOUSE BLANK ON OFF STARTUP 1 Plug power cord into outlet. 2 The fan motor starts. Press the Master Power Switch. (Leave this switch On.) The On/Off button will turn amber in approximately 5 seconds. 3 Press the On/Off button. SHUTDOWN :00:00 00:05:00 Q U I C K S T A R T G U I D E 2. PRODUCT CONTENTS STANDARD CONTENTS Remote Control (with batteries) Mac adapter Power Cable (US, UK, Euro) Serial Mouse Cable DVI-D Cable 3-Conductor Video/Audio Cable VGA Cable PC Audio Cable S-Video Cable USB Cable W A L L D I S P L A Y Q U I C K S T A R T G U I D E Press the On/Off button. The On/Off button blinks red for 30 seconds. The projection arm closes. The fan runs for 5 minutes. PRODUCT AND SAFETY INFORMATION After pressing, the On/Off button blinks green, then stays green. The projection arm extends out from the top of Wall Display. The lamp comes on. (Allow approximately 1 minute for full illumination.) Wherever there's a great meeting, you ll find 3M. ( ) (Leave the Master Power Switch turned On.) Note: After the On/Off button is pressed, the unit will not respond to any other commands for 30 seconds. Innovation Operator s Guide (CD-ROM) Quick Start Guide Product and Safety Information Product Registration Card IDEABOARD CONTENTS (Included with Wall Display with Ideaboard) Digital marker sleeves ebeam Software CD-ROM Dry-erase markers (4) Digital eraser Lithium ion batteries CR2032 (10) Digital Mouse stylus insert 8 PRODUCT AND SAFETY INFORMATION

9 PRODUCT AND SAFETY INFORMATION 3. USING THE OPERATOR S GUIDE CD-ROM CD-ROM CONTENTS The Wall Display Operator s Guide CD-ROM disk contains the combined Operator s Guide for Wall Display and ebeam Software. The Operator s Guide has detailed information about the use and maintenance of the Wall Display, and use of the ebeam Software. MINIMUM SYSTEM REQUIREMENTS Adobe Acrobat Reader 4.0 or later Note: A free copy of Acrobat Reader can be downloaded at CD-ROM drive VIEWING THE OPERATOR S GUIDE WINDOWS 95/98 OR WINDOWS NT 4.0 Insert the Wall Display Operator s Guide CD-ROM into your computer s CD-ROM drive. The CD will automatically run and open the Operator s Guide. Note: If the Operator s Guide fails to automatically open, do the following: 1. Open My Computer or Windows Explorer 2. Double-click the CD-ROM drive letter 3. Double-click MainMenu.pdf VIEWING THE OPERATOR S GUIDE MACINTOSH COMPUTERS Insert the Wall Display Operator s Guide CD-ROM into the CD-ROM drive. A drive icon will display on the desktop. Double-click the icon to open the drive. Double-click MainMenu.pdf. DOWNLOAD THE OPERATOR S GUIDE FROM THE INTERNET Download the Operator s Guide from the 3M web site: 9

10 Important Notice All statements, technical information, and recommendations related to 3M s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly set forth in a written agreement signed by an authorized officer of 3M. Let us help you make the most of your next presentation. We offer everything from presentation supplies to tips for better meetings. And we re the only transparency manufacturer that offers a recycling program for your used transparencies. For late-breaking news, handy reference and free product samples, call us toll-free in the continental United States or Canada, 24 hours a day, or vist our Internet Web Site. 3M Austin Center Building A145-5N River Place Blvd. Austin, TX M Canada P.O. Box 5757 London, Ontario N6A 4T1 3M Mexico, S.A. de C.V. Apartado Postal Mexico, D.F Mexico 3M Europe Boulevard de l Oise Cerge Pontoise Cedex France Litho in USA Copyright M IPC All Rights Reserved Rev. B

3M RFID Tracking Pad Model 770

3M RFID Tracking Pad Model 770 Owners Manual 3M Information and Materials Security 3M Center, Building 225-4N-14 St. Paul, Minnesota 55144-1000 xx-xxxx-xxxx-x Rev 1 Copyright 2003 3M IPC. All rights reserved.