Managing Remote Presence
|
|
- Brian Hensley
- 6 years ago
- Views:
Transcription
1 This chapter includes the following sections: Configuring Serial Over LAN, page 1 Configuring Virtual Media, page 2 KVM Console, page 9 Launching KVM Console, page 10 Virtual KVM Console (HTML Based), page 11 Comparison Between Java Based KVM and HTML5 Based KVM, page 14 Configuring the Virtual KVM, page 16 Configuring Serial Over LAN Serial over LAN enables the input and output of the serial port of a managed system to be redirected over IP. Configure and use serial over LAN on your server when you want to reach the host console with Cisco IMC. You must log in as a user with admin privileges to configure serial over LAN. In the Navigation pane, click the Compute menu. In the Remote Presence pane, click the Serial over LAN tab. In the Serial over LAN Properties area, update the following properties: Enabled check box If checked, Serial over LAN (SoL) is enabled on this server. Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0 1
2 Configuring Virtual Media Baud Rate drop-down list The baud rate the system uses for SoL communication. This can be one of the following: 9600 bps 19.2 kbps 38.4 kbps 57.6 kbps kbps Com Port drop-down list The serial port through which the system routes SoL communication. This field is only available on some C-Series servers. If it is not available, the server always uses COM port 0 for SoL communication. You can select one of the following: com0 SoL communication is routed through COM port 0, an externally accessible serial port that supports either a physical RJ45 connection to an external device or a virtual SoL connection to a network device. If you select this option, the system enables SoL and disables the RJ45 connection, which means that the server can no longer support an external serial device. com1 SoL communication is routed through COM port 1, an internal port accessible only through SoL. If you select this option, you can use SoL on COM port 1 and the physical RJ45 connection on COM port 0. Changing the Com Port setting disconnects any existing SoL sessions. This option is available only on some C-Series servers. Click Save Changes. Configuring Virtual Media You must log in as a user with admin privileges to configure virtual media. 2 Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0
3 Creating a Cisco IMC Mapped vmedia Volume In the Navigation pane, click the Compute tab. In the Compute tab, click the Remote Management tab. In the Remote Management tab, click the Virtual Media tab. In the Virtual Media Properties area, update the following properties: Enabled check box Active Sessions field Enable Virtual Media Encryption check box Low Power USB enabled check box If checked, virtual media is enabled. If you clear this check box, all virtual media devices are automatically detached from the host. The number of virtual media sessions that are currently running. If checked, all virtual media communications are encrypted. If checked, low power USB is enabled. If the low power USB is enabled, after mapping the ISO and rebooting the host, the virtual drives appear on the boot selection menu. Click Save Changes. Creating a Cisco IMC Mapped vmedia Volume You must log in with admin privileges to perform this task. In the Navigation pane, click the Compute menu. In the Remote Management tab, click the Virtual Media tab In the Current Mappings area, click Add New Mapping. In the Add New Mapping dialog box, update the following fields: Volume field The identity of the image mounted for mapping. Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0 3
4 Creating a Cisco IMC Mapped vmedia Volume Mount Type drop-down list The type of mapping. This can be one of the following: Ensure that the communication port of the mount type that you choose is enabled on the switch. For example, when you are using CIFS as your mount type, ensure port 445 (which is its communication port) is enabled on the switch. Similarly, enable ports 80 for HTTP, 443 for HTTPS and 2049 for NFS when you use them. NFS Network File System. CIFS Common Internet File System. WWW(HTTP/HTTPS) HTTP-based or HTTPS-based system. Before mounting the virtual media, Cisco IMC tries to verify reachability to the end server by pinging the server. Remote Share field The URL of the image to be mapped. The format depends on the selected Mount Type: NFS Use serverip:/share. CIFS Use //serverip/share. WWW(HTTP/HTTPS) Use http[s]://serverip/share. Remote File field The name and location of the.iso or.img file in the remote share. 4 Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0
5 Creating a Cisco IMC Mapped vmedia Volume Mount Options field Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0 5
6 Creating a Cisco IMC Mapped vmedia Volume Industry-standard mount options entered in a comma separated list. The options vary depending on the selected Mount Type. If you are using NFS, leave the field blank or enter one or more of the following: ro rw nolock noexec soft port=value timeo=value retry=value If you are using CIFS, leave the field blank or enter one or more of the following: soft nounix noserverino guest username=value ignored if guest is entered. password=value ignored if guest is entered. sec=value The protocol to use for authentication when communicating with the remote server. Depending on the configuration of CIFS share, VALUE could be one of the following: ne authentication is used Ntlm NT LAN Manager (NTLM) security protocol. Use this option only with Windows 2008 R2 and Windows 2012 R2. Ntlmi NTLMi security protocol. Use this option only when you enable Digital Signing in the CIFS Windows server. Ntlmssp NT LAN Manager Security Support Provider (NTLMSSP) protocol. Use this option only with Windows 2008 R2 and Windows 2012 R2. Ntlmsspi NTLMSSPi protocol. Use this option only when you enable Digital Signing in the CIFS Windows server. 6 Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0
7 Viewing Cisco IMC-Mapped vmedia Volume Properties Ntlmv2 NTLMv2 security protocol. Use this option only with Samba Linux. Ntlmv2i NTLMv2i security protocol. Use this option only with Samba Linux. If you are using WWW(HTTP/HTTPS), leave the field blank or enter the following: noauto Before mounting the virtual media, Cisco IMC tries to verify reachability to the end server by pinging the server. username=value password=value User field Password field The username for the specified Mount Type, if required. The password for the selected username, if required. Step 7 Click Save. Viewing Cisco IMC-Mapped vmedia Volume Properties You must log in with admin privileges to perform this task. In the Navigation pane, click the Compute menu. In the Remote Management tab, click the Virtual Media tab Select a row from the Current Mappings table. Click Properties and review the following information: Add New Mapping button Opens a dialog box that allows you to add a new image. Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0 7
8 Removing a Cisco IMC-Mapped vmedia Volume Properties button Unmap button Last Mapping Status Volume column Mount Type drop-down list Remote Share field Remote File field Status field Opens a dialog box that allows you to view or change the properties for the selected image. Unmaps the mounted vmedia. The status of the last mapping attempted. The identity of the image. The type of mapping. The URL of the image. The exact file location of the image. The current status of the map. This can be one of the following: OK The mapping is successful. In Progress The mapping is in progress. Stale Cisco IMC displays a text string with the reason why the mapping is stale. Error Cisco IMC displays a text string with the reason for the error. Removing a Cisco IMC-Mapped vmedia Volume You must log in with admin privileges to perform this task. In the Navigation pane, click the Compute menu. In the Remote Management tab, click the Virtual Media tab Select a row from the Current Mappings table. Click Unmap. 8 Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0
9 Remapping an Existing Cisco IMC vmedia Image Remapping an Existing Cisco IMC vmedia Image You must log in with admin privileges to perform this task. In the Navigation pane, click the Compute menu. In the Remote Management tab, click the Virtual Media tab Select a row from the Current Mappings table. Click Remap. Deleting a Cisco IMC vmedia Image You must log in with admin privileges to perform this task. In the Navigation pane, click the Compute menu. In the Remote Management tab, click the Virtual Media tab Select a row from the Current Mappings table. Click Delete. KVM Console The KVM console is an interface accessible from Cisco IMC that emulates a direct keyboard, video, and mouse (KVM) connection to the server. The KVM console allows you to connect to the server from a remote location. Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0 9
10 Launching KVM Console Instead of using CD/DVD or floppy drives physically connected to the server, the KVM console uses virtual media, which are actual disk drives or disk image files that are mapped to virtual CD/DVD or floppy drives. You can map any of the following to a virtual drive: CD/DVD or floppy drive on your computer Disk image files (ISO or IMG files) on your computer USB flash drive on your computer CD/DVD or floppy drive on the network Disk image files (ISO or IMG files) on the network USB flash drive on the network You can use the KVM console to install an OS on the server. To configure the KVM console successfully for the S3260 Storage Server, you need to configure IP addresses for the Cisco IMC, CMC, and BMC components. You can configure the IP addresses for these components using the CLI interface or Web UI. For the CLI, use the command scope network, or view the setting using scope <chassis/server1/2><cmc/bmc><network>. To configure IP addresses for network components on the web interface, see the steps described in the section Configuring Network-Related Settings. When launching the KVM Console from Internet Explorer 6 SP1 on Windows Server 2003, the browser will report that it cannot download a required file. If this occurs, click the browser Tools menu and select Internet Options. Click the Advanced tab and, in the Security section, uncheck the checkbox for "Do not save encrypted pages to disk." Launch the KVM Console again. Launching KVM Console You can launch the KVM console from either the Home page or from the Remote Management area. 10 Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0
11 Virtual KVM Console (HTML Based) Step 7 Step 8 Step 9 0 To launch the console from Home page, in the Navigation pane, click the Chassis menu. In the Chassis menu, click Summary. From the tool bar, click Launch KVM and select Java based KVM or HTML based KVM. In the Servers drop-down menu, select a server. Alternatively, in the Navigation pane, click the Compute menu. In the Remote Management pane, click the Virtual KVM tab. In the Virtual KVM tab, click Launch Java based KVM console or Launch HTML based KVM console. Click the URL link displayed in the pop-up window (HTML based KVM console only) to load the client application. You need to click the link every time you launch the KVM console. Virtual KVM Console (HTML Based) The KVM console is an interface accessible from Cisco IMC that emulates a direct keyboard, video, and mouse (KVM) connection to the server. It allows you to connect to and control the server from a remote location and to map physical locations to virtual drives that can by accessed by the server during this KVM session. File Menu Menu Item Capture to File button Exit button Opens the Save dialog box that allows you to save the current screen as a JPG image. Closes the KVM console. View Menu Menu Item Keyboard Refresh Full Screen Displays the virtual keyboard for the KVM console, which you can use to input data. Updates the console display with the server's current video output. Expands the KVM console so that it fills the entire screen. Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release
12 Virtual KVM Console (HTML Based) Macros Menu Choose the keyboard shortcut you want to execute on the remote system. Menu Item Server Macros menu Static Macros menu User Defined Macros menu Manage button Displays the server side macros downloaded from the Cisco IMC, if any. If no server side macros have been downloaded, then the menu item is disabled. Displays a predefined set of macros. Displays the user-defined macros that have been created. Opens the Configure User Defined Macros dialog box, which allows you to create and manage macros. System-defined macros cannot be deleted. Tools Menu Menu Item Session Options Opens the Session Options dialog box that lets you specify: Scaling Specify whether or not you want to maintain the aspect ratio of the screen. Check or uncheck the Maintain Aspect Ratio checkbox (checked by default). The mouse acceleration to use on the target system. The default is Absolute positioning (Windows, Newer Linux & MAC OS X). Other options are: Relative Positioning, no acceleration Relative Positioning (RHEL, Older Linux) Session User List Chat Opens the Session User List dialog box that shows all the user IDs that have an active KVM session. Opens the Chat box to communicate with other users. Power Menu Menu Item Power On System button Powers on the system. This option is disabled when the system is powered on and it is enabled when the system is not powered. 12 Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0
13 Virtual KVM Console (HTML Based) Menu Item Power Off System button Reset System (warm boot)button Power Cycle System (cold boot) button Powers off the system from the virtual console session. This option is enabled when the system is powered on and disabled when the system is not powered on. Reboots the system without powering it off. This option is enabled when the system is powered on and disabled when the system is not powered on. Turns off system and then back on. This option is enabled when the system is powered on and disabled when the system is not powered on. Boot Device Menu Override Boot Device list Clicking this option enables the host to boot to the first device configured. A list of boot devices that the server uses to boot from only for the next server boot, without disrupting the currently configured boot order. Once the server boots from the one time boot device, all its future reboots occur from the previously configured boot order. A maximum of 15 devices are displayed on the KVM console. Virtual Media Menu Activate Virtual Devices Map CD/DVD Map Removable Disk Activates a vmedia session that allows you to attach a drive or image file from your local computer or network. You can map a CD or a DVD image from your local machine and map the drive to the image. This option is available when you click Activate Virtual Devices. You can map a removable disk image from your local machine and map the drive to the image. This option is available when you click Activate Virtual Devices. Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release
14 Comparison Between Java Based KVM and HTML5 Based KVM Map Floppy Disk You can map a floppy disk image from your local machine and map the drive to the image. This option is available when you click Activate Virtual Devices. Help Menu Help Topics About KVM Viewer Clicking this option brings you back to this window. Displays the version number of the KVM viewer. Settings The Settings icon is located on the top right hand corner of the HTML KVM viewer window. Logged in as: Host Log Out Displays your user role ID. Displays the host name. Allows you to log out of the KVM viewer. Comparison Between Java Based KVM and HTML5 Based KVM The following table lists the differences between Java based KVM and HTML5 based KVM. Menu Option Action Available in Java Based KVM Available in HTML5 Based KVM File Open Capture to file Paste Text from Clipboard Paste Text from File Exit View Refresh 14 Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0
15 Comparison Between Java Based KVM and HTML5 Based KVM Menu Option Action Available in Java Based KVM Available in HTML5 Based KVM Fit Video-Scaling Full-Screen Mini-Mod Macros Server Macros Static Macros User Defined Macros Manage Tool Session Option Single Cursor Stats Session User List Chat Recorder/Playback Controls Export Video Power Power On Power OFF Reset System Power Cycle system Mini-Mod Virtual Media Create Image Activate Virtual Devices Physical Device Mapping Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release
16 Configuring the Virtual KVM Configuring the Virtual KVM You must log in as a user with admin privileges to configure the virtual KVM. In the Navigation pane, click the Compute menu. In the Remote Management pane, click the Virtual KVM tab. On the Virtual KVM tab, complete the following fields: Enabled check box Max Sessions drop-down list Active Sessions field Remote Port field Enable Video Encryption check box Enable Local Server Video check box If checked, the virtual KVM is enabled. The virtual media viewer is accessed through the KVM. If you disable the KVM console, Cisco IMC also disables access to all virtual media devices attached to the host. The maximum number of concurrent KVM sessions allowed. You can select any number between 1 and 4. The number of KVM sessions running on the server. The port used for KVM communication. If checked, the server encrypts all video information sent through the KVM. If checked, the KVM session is also displayed on any monitor attached to the server. Click Save Changes. Enabling the Virtual KVM You must log in as a user with admin privileges to enable the virtual KVM. 16 Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0
17 Disabling the Virtual KVM In the Navigation pane, click the Compute menu. In the Remote Management pane, click the Virtual KVM tab. On the Virtual KVM tab, check the Enabled check box. Click Save Changes. Disabling the Virtual KVM You must log in as a user with admin privileges to disable the virtual KVM. In the Navigation pane, click the Compute menu. In the Remote Management pane, click the Virtual KVM tab. On the Virtual KVM tab, uncheck the Enabled check box. Click Save Changes. Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release
18 Disabling the Virtual KVM 18 Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for S3260 Storage Servers, Release 3.0
Managing Remote Presence
This chapter includes the following sections: Configuring Serial Over LAN, on page 1 Configuring Virtual Media, on page 2 KVM Console, on page 9 Launching KVM Console, on page 10 Virtual KVM Console (HTML
More informationKVM Console. KVM Console
, page 1 Virtual, page 2 KVM Direct Access, page 5 Starting the from a Server, page 6 Starting the from a Service Profile, page 6 Starting the from the Cisco UCS KVM Direct Web Page, page 7 Starting the
More informationStarting the KVM Console
Starting the KVM Console This chapter includes the following sections: KVM Console, page 1 Starting the KVM Console from a Server, page 5 Starting the KVM Console from a Service Profiles, page 5 Starting
More informationInstalling the Operating System or Hypervisor
If you purchased E-Series Server or NCE Option 1 (E-Series Server or NCE without a preinstalled operating system or hypervisor), you must install an operating system or hypervisor. This chapter includes
More informationInstalling the Server Operating System or Hypervisor
Installing the Server Operating System or Hypervisor This chapter includes the following sections: Operating System or Hypervisor Installation Methods, page 1 KVM Console, page 1 PXE Installation Servers,
More informationInstalling CMX 10.5 on Cisco MSE 3375
Installing CMX 10.5 on Cisco MSE 3375 Contents Introduction Prerequisites Requirements Components Used Installation CIMC configuration and KVM launch CMX image installation CMX initial setup CMX node installation
More informationUpgrading Earlier Release Version Servers for Cisco UCS Manager Integration
Upgrading Earlier Release Version s for Cisco UCS Manager Integration This chapter includes the following sections: Required Items for Upgrade, page 1 Upgrading the C-Series Firmware, page 2 Updating Cisco
More informationUnderstanding UCS Server Configuration Utility User Interface
CHAPTER 3 Understanding UCS Server Configuration Utility User Interface The UCS-SCU GUI is a web-based management interface that allows you to perform tasks such as operating system installation, RAID
More informationAST2500 ibmc Configuration Guide
AST2500 ibmc Configuration Guide Version 1.0b Copyright Copyright 2017 MITAC COMPUTING TECHNOLOGY CORPORATION. All rights reserved. No part of this manual may be reproduced or translated without prior
More informationLogging In and Setting Up
This chapter includes the following sections: Overview of, page 1 Resetting the Admin Password, page 3 Password Guidelines, page 3 Resetting the Shared Secret, page 4 Overview of You can log in and work
More informationUpdating the Firmware on Cisco UCS C-Series Servers
Updating the Firmware on Cisco UCS C-Series Servers This chapter includes the following topics: Upgrading the Firmware on a Cisco UCS C-Series Server Using the HUU, on page 1 Upgrading the Firmware on
More informationCisco Integrated Management Controller (IMC) Supervisor is a management system that allows you to manage rack mount servers on a large scale.
Contents Introduction Prerequisites Requirements Qualified Serviers Minimum Firmware Versions Supported PCiE Cards Supported Hypervisor versions Supported Browser Versions Configure Deploying Cisco IMC
More information» Application Note « MSP802x Intel AMT/KVM Configuration. Revision 2.0 November
» Application Note «MSP802x Intel AMT/KVM Configuration Revision 2.0 November 2015 Table of Contents Introduction... 3 1- Provisioning the Intel AMT IP address and password... 4 2- Switch Configuration
More informationCisco UCS Diagnostics User Guide for B-Series Servers, Release 2.0
First Published: 2018-03-13 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 2018
More informationUCS-E160DP Double-wide E-Series Server, 6 core CPU, with PCIe
Overview This chapter includes the following sections: Cisco UCS E-Series Servers Overview, page 1 Server Software, page 2 CIMC Overview, page 3 CIMC GUI, page 3 Cisco UCS E-Series Servers Overview The
More informationIPMI Configuration Guide
IPMI Configuration Guide 1. Introduction of IPMI Server Manager... 2 2. IPMI Server Manager GUI Overview... 3 1 1. Introduction of IPMI Server Manager IPMI Server Manager allows remote access of computers
More informationGIGABYTE Remote Management Console User s Guide. Version: 1.0
GIGABYTE Remote Management Console User s Guide Version: 1.0 Table of Contents Using Your GIGABYTE Remote Management Console...2 Software Install...3 Prerequisites on remote management PC...3 Install Java
More informationAs the system boots press Shift and F10 to enter the DASH Setup.
The following guide explains how to setup and use the DASH enabled Pegatron IPMSB-DA with SyAM Software, System Client and System Area Manager for performing the DASH out of band management functions.
More informationCisco Host Upgrade Utility 3.0 User Guide
First Published: 2016-12-14 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 2016-2018
More informationConfiguring Communication Services
This chapter includes the following sections: Configuring HTTP, on page 1 Configuring SSH, on page 2 Configuring XML API, on page 3 Enabling Redfish, on page 3 Configuring IPMI, on page 4 Configuring SNMP,
More informationAVWorks. Installer/User Guide
AVWorks Installer/User Guide INSTRUCTIONS This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
More informationDeploying Cisco UCS Central
This chapter includes the following sections: Obtaining the Cisco UCS Central Software from Cisco, page 1 Using the Cisco UCS Central OVA File, page 2 Using the Cisco UCS Central ISO File, page 4 Logging
More informationParallels Remote Application Server
Parallels Remote Application Server Parallels Client for Mac User's Guide v16 Parallels International GmbH Vordergasse 59 8200 Schaffhausen Switzerland Tel: + 41 52 672 20 30 www.parallels.com Copyright
More informationConfiguring and Using AMT on TS130. Lenovo ThinkServer
Lenovo ThinkServer August 31, 2011 Contents Overview... 3 Enabling and Configuring AMT on TS130... 3 Provisioning AMT on TS130 Using Manual Configuration Method... 4 AMT Configuration with Web Interface...
More informationIBM NetBAY Virtual Console Software. Installer and User Guide
IBM NetBAY Virtual Console Software Installer and User Guide INSTRUCTIONS This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the
More informationServer Utilities. Enabling Or Disabling Smart Access USB. This chapter includes the following sections:
This chapter includes the following sections: Enabling Or Disabling Smart Access USB, page 1 Exporting Technical Support Data, page 3 Exporting Technical Support Data to Front Panel USB Device, page 5
More informationSun VirtualBox Installation Tutorial
Sun VirtualBox Installation Tutorial Installing Linux Mint 5 LTS Guest OS By Dennis Berry Welcome to the world of virtualization and Linux. This tutorial is intended to help users who are new to the world
More informationHabanero BMC Configuration Guide
Habanero BMC Configuration Guide Version 1.0 Copyright Copyright 2015 MiTAC International Corporation. All rights reserved. No part of this manual may be reproduced or translated without prior written
More informationFirmware Management. Overview of Firmware. This chapter includes the following sections:
This chapter includes the following sections: Overview of Firmware, page 1 Options for Upgrading Firmware, page 2 Obtaining Software from Cisco Systems, page 2 Installing CIMC Firmware from a Remote Server,
More informationPart 1 - Getting Started
Part 1 - Getting Started 1. Install System Area Manager Dowload link: http://download.syamsoftware.com/windows/v4.55/syam_system_area_manager_v4.55-release.zip System Area Manager should be installed on
More informationCisco VDS Service Broker Software Installation Guide for UCS Platforms
Cisco VDS Service Broker 1.0.1 Software Installation Guide for UCS Platforms Revised: May 2013 This document provides detailed instructions for installing the Cisco Videoscape Distribution Suite Service
More informationSystem Configuration. Browser Requirements on a second system. HP Z1 G2 Workstation with Intel vpro Technology Setup & Use Guide
The following guide explains how to setup and use the HP Z1 G2 Intel vpro Technology workstation SyAM Software, System Client and System Area Manager for performing the AMT out of band management functions.
More informationCisco Host Upgrade Utility 2.0 User Guide
First Published: 2016-09-17 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 2016
More informationCisco UCS C-Series Integrated Management Controller GUI Configuration Guide for C3X60 Servers
Cisco UCS C-Series Integrated Management Controller GUI Configuration Guide for C3X60 Servers First Published: 2015-09-17 Last Modified: 2016-09-16 Americas Headquarters Cisco Systems, Inc. 170 West Tasman
More informationCisco UCS Diagnostics User Guide for B-Series Servers, Release 1.0
First Published: October 25, 2013 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883
More informationAST2500 ibmc Configuration Guide
AST2500 ibmc Configuration Guide Version 1.0 Copyright Copyright 2017 MITAC COMPUTING TECHNOLOGY CORPORATION. All rights reserved. No part of this manual may be reproduced or translated without prior written
More informationCisco Unified Serviceability
Cisco Unified Serviceability Introduction, page 1 Installation, page 5 Introduction This document uses the following abbreviations to identify administration differences for these Cisco products: Unified
More informationManagement Console User s Guide (AST 2500 Chipset)
Management Console User s Guide (AST 2500 Chipset) Version: 1.2 Table of Contents Using Your Management Console... 2 Management Console Key Features and Functions... 3 Software Install... 4 Prerequisites
More informationManaging Cisco UCS C3260 Dense Storage Rack Server
Managing Cisco UCS C3260 Dense Storage Rack Server This chapter contains the following topics: About Cisco UCS C3260 Dense Storage Rack Server, page 1 Cisco UCS C3260 Dense Storage Rack Server Architectural
More informationIBM NetBAY Virtual Console Software. Installer and User Guide
IBM NetBAY Virtual Console Software Installer and User Guide INSTRUCTIONS This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the
More informationReset the Admin Password with the ExtraHop Rescue CD
Reset the Admin Password with the ExtraHop Rescue CD Published: 2018-01-19 This guide explains how to reset the administration password on physical and virtual ExtraHop appliances with the ExtraHop Rescue
More informationCommandCenter Secure Gateway User Guide Release 5.2
CommandCenter Secure Gateway User Guide Release 5.2 Copyright 2011 Raritan, Inc. CC-0U-v5.2-E July 2011 255-80-3100-00 This document contains proprietary information that is protected by copyright. All
More informationHost Upgrade Utility User Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine
Host Upgrade Utility User Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute First Published: August 09, 2013 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive
More informationiris-2400 Web GUI iris-2400 Web GUI IEI iman Web-based Graphics User Interface (GUI) User Manual Page i Rev May 8, 2014
iris-2400 Web GUI IEI iman Web-based Graphics User Interface (GUI) User Manual Rev. 1.00 May 8, 2014 Page i Revision Date Version Changes May 8, 2014 1.00 Initial release MODEL: Page ii Copyright COPYRIGHT
More informationStorage Controller Considerations
This appendix provides storage controller (RAID) information. Supported Storage Controllers and Cables, page 1 Storage Controller Card Firmware Compatibility, page 2 RAID Backup (Supercap), page 2 Write-Cache
More informationCisco UCS C-Series. Installation Guide
Installation Guide UPDATED: 04 October 2018 Copyright Notices Copyright 2002-2018 KEMP Technologies, Inc. All rights reserved. KEMP Technologies and the KEMP Technologies logo are registered trademarks
More informationInstalling Cisco StadiumVision Director Software from a DVD
Installing Cisco StadiumVision Director Software from a DVD First Published: May 29, 2012 Revised: August 2, 2012 This module describes how to install the Cisco StadiumVision Director Release 3.0 software
More informationCisco IMC Supervisor Rack-Mount Servers Management Guide, Release 1.0
Cisco IMC Supervisor Rack-Mount Servers Management Guide, Release 1.0 First Published: November 24, 2014 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com
More informationMonitoring Inventory. Inventory Management. This chapter includes the following sections:
This chapter includes the following sections: Inventory Management, page 1 Overview to Global Logical Resources, page 2 Configuring Inventory Data Collection Schedule, page 3 Viewing Inventory Details,
More informationCIS 231 Windows 2012 R2 Server Install Lab #1
CIS 231 Windows 2012 R2 Server Install Lab #1 1) To avoid certain problems later in the lab, use Chrome as your browser: open this url: https://vweb.bristolcc.edu 2) Here again, to avoid certain problems
More informationVirtual Console Software. Installation and User s Guide
Virtual Console Software Installation and User s Guide 39M2888 590534599A Virtual Console Software Installation and User s Guide iii TABLE OF CONTENTS Table of Contents List of Figures... vii List of
More informationWeb Console Setup & User Guide. Version 7.1
Web Console Setup & User Guide Version 7.1 1 Contents Page Number Chapter 1 - Installation and Access 3 Server Setup Client Setup Windows Client Setup Mac Client Setup Linux Client Setup Interoperation
More informationdctrack Quick Setup Guide (Recommended) Obtain a dctrack Support Website Username and Password
dctrack 5.0.0 Quick Setup Guide This guide walks you through installing dctrack for the first time. In other words, this is a clean install - it is not an integration of dctrack and Power IQ, and it is
More information1. IPMI OS Drivers and Open Source Software
AST2050 Application 1. IPMI OS Drivers and Open Source Software AST2050 firmware is full compliant with IPMI 2.0 specification. So users could use standard IPMI driver comes from operation system distribution.
More informationCHAPTER. Introduction
CHAPTER 1 Cisco Unified Communications Manager (formerly Cisco Unified CallManager) serves as the software-based call-processing component of the Cisco Unified Communications family of products. A wide
More informationVI-CENTER EXTENDED ENTERPRISE EDITION GETTING STARTED GUIDE. Version: 4.5
VI-CENTER EXTENDED ENTERPRISE EDITION GETTING STARTED GUIDE This manual provides a quick introduction to Virtual Iron software, and explains how to use Virtual Iron VI-Center to configure and manage virtual
More informationMT LoadMaster Cisco UCS C-Series. Multi-Tenant LoadMaster for Cisco UCS C-Series Rack Server. Installation Guide
Multi-Tenant LoadMaster for Cisco UCS C-Series Rack Installation Guide VERSION: 7.0 UPDATED: MARCH 2016 Table of Contents 1 Introduction... 3 1.1 Pre-requisites... 3 2... 4 2.1 Configure the Boot Options
More informationStorage Controller Considerations
This appendix provides storage controller (RAID and HBA) information. Supported Storage Controllers and Cables, page 1 Storage Controller Card Firmware Compatibility, page 3 RAID Backup (Supercap), page
More informationConfiguring Cisco UCS Server Pools and Policies
This chapter contains the following sections: Global Equipment Policies, page 1 UUID Pools, page 3 Server Pools, page 5 Management IP Pool, page 7 Boot Policy, page 8 Local Disk Configuration Policy, page
More informationCIS 231 Windows 7 Install Lab #2
CIS 231 Windows 7 Install Lab #2 1) To avoid certain problems later in the lab, use Chrome as your browser: open this url: https://vweb.bristolcc.edu 2) Here again, to avoid certain problems later in the
More informationIntroduction to Cisco UCS Central
Introducing Cisco UCS Central, page 1 Introducing Cisco UCS Central Cisco UCS Central provides scalable management solution for growing Cisco UCS environment. Cisco UCS Central simplifies the management
More informationIntroducing Cisco UCS Central 1.4
This chapter includes the following sections: Overview of Cisco UCS Central 1.4 Features, page 1 Behavior and Design Changes in HTML5 UI, page 10 Multi-version Management Support, page 11 Feature Support
More informationConfiguration Export and Import
This chapter includes the following sections:, page 1 From the Export & Import, you can schedule configuration backup for Cisco UCS Central and the registered Cisco UCS Domains. You can schedule export
More informationDSView. Installer/User Guide
DSView Installer/User Guide DSView Installer/User Guide Avocent, the Avocent logo, The Power of Being There, OutLook, DSView, AutoView, DSR, Dambrackas Video Compression, Click and Connect and OSCAR are
More informationCisco IMC Firmware Management
This chapter includes the following sections: Overview of Firmware, page 1 Obtaining Firmware from Cisco, page 2 Installing Cisco IMC Firmware from a Remote Server, page 4 Activating Installed Cisco IMC
More informationSimplifying Blade Server Update with Dell Repository Manager
Simplifying Blade Server Update with Dell Repository Manager Dell Engineering December 2015 A Dell Technical White Paper Revisions Date December 2015 Description Initial release THIS WHITE PAPER IS FOR
More informationThe following table lists the supported upgrade paths to Cisco Finesse Release 11.5(1).
Supported Paths, page 1 Aligned Partitions Support, page 1 Perform, page 2 Perform Rollback, page 4 Supported Paths The following table lists the supported upgrade paths to Cisco Finesse Release 11.5(1).
More informationInstallation Guide. . All right reserved. For more information about Specops Deploy and other Specops products, visit
. All right reserved. For more information about Specops Deploy and other Specops products, visit www.specopssoft.com Copyright and Trademarks Specops Deploy is a trademark owned by Specops Software. All
More informationUsing UCS-Server Configuration Utility
CHAPTER 3 This chapter provides information on using the UCS-Server Configuration Utility and contains the following sections: UCS-SCU Interface, page 3-1 Server Inventory, page 3-3 Server Health, page
More informationVIRTUALIZATION MANAGER ENTERPRISE EDITION GETTING STARTED GUIDE
VIRTUALIZATION MANAGER ENTERPRISE EDITION GETTING STARTED GUIDE This manual provides a quick introduction to Virtual Iron software, and explains how to use Virtual Iron Virtualization Manager to configure
More informationRole-Based Access Configuration
Role-Based Access Control Overview, page 1 User Accounts for Cisco UCS, page 1 User Roles, page 3 Locales, page 9 Locally Authenticated User Accounts, page 11 Monitoring User Sessions, page 19 Role-Based
More informationConfiguring the SMA 500v Virtual Appliance
Using the SMA 500v Virtual Appliance Configuring the SMA 500v Virtual Appliance Registering Your Appliance Using the 30-day Trial Version Upgrading Your Appliance Configuring the SMA 500v Virtual Appliance
More informationCisco IMC Smart Plugin 1.0 For HP Operations Manager - Windows
Cisco IMC Smart Plugin 1.0 For HP Operations Manager - Windows Operations Guide Mar 12 th, 2014 Table of Contents 1 INTRODUCTION... 1 1.1 VIEWING FAULTS IN HPOM... 1 2 PLUGIN FEATURES... 7 2.1 EDITING
More informationPractice Labs User Guide
Practice Labs User Guide This page is intentionally blank Contents Introduction... 3 Overview... 3 Accessing Practice Labs... 3 The Practice Labs Interface... 4 Minimum Browser Requirements... 5 The Content
More informationIT Essentials v6.0 Windows 10 Software Labs
IT Essentials v6.0 Windows 10 Software Labs 5.2.1.7 Install Windows 10... 1 5.2.1.10 Check for Updates in Windows 10... 10 5.2.4.7 Create a Partition in Windows 10... 16 6.1.1.5 Task Manager in Windows
More informationRelease notes for Version of HMX Extenders
4.0.0.12 Release notes for Version 4.0.0.12 of HMX Extenders HMX KVM Extender System Firmware Revision 4.0.0.12 Release Notes March 15 th 2011 This document outlines: 1 HMX Extender System Firmware Version
More informationFireFox. CIS 231 Windows 2012 R2 Server Install Lab #1
CIS 231 Windows 2012 R2 Server Install Lab #1 1) Use either Chrome or Firefox to access the VMware vsphere web Client. https://vweb.bristolcc.edu CHROME At the your connection is not private message, click
More informationTroubleshooting 1240AG Series Autonomous Access Points
CHAPTER 3 Troubleshooting 1240AG Series Autonomous Access Points This chapter provides troubleshooting procedures for basic problems with the 1240AG series autonomous access point (AIR-AP1242AG or AIR-AP1242G).
More informationThe Ip address / Name value should be: srvvcenter-cis
CIS133 Installation Lab #1 - DESKTOP CLIENT OpenSUSE Install. Before beginning the installation, create a virtual machine in which you will install the operating system. 1) Open the VMware vsphere Client.
More informationAdministration of Cisco WLC
Using the Controller Interface, on page 1 Enabling Web and Secure Web Modes, on page 6 Telnet and Secure Shell Sessions, on page 8 Management over Wireless, on page 13 Configuring Management using Dynamic
More informationInstalling or Recovering Cisco APIC Images
Installation s, on page 1 Usage Guidelines, on page 2 Conditions for Recovering or Installing Cisco APIC Software Image, on page 5 Installing Cisco APIC Software Using a PXE Server, on page 5 Installing
More informationConfiguring and Managing WAAS Legacy Print Services
13 CHAPTER Configuring and Managing WAAS Legacy Print Services This chapter describes how to configure and manage the WAAS legacy print services feature that allows WAEs to function as print servers in
More informationBROWSER-BASED SUPPORT CONSOLE USER S GUIDE. 31 January 2017
BROWSER-BASED SUPPORT CONSOLE USER S GUIDE 31 January 2017 Contents 1 Introduction... 2 2 Netop Host Configuration... 2 2.1 Connecting through HTTPS using Certificates... 3 2.1.1 Self-signed certificate...
More informationSmart Call Home Deploying thetransport Gateway on Cisco Unified Computing System and Red Hat Linux
Deployment Guide Smart Call Home Deploying thetransport Gateway on Cisco Unified Computing System and Red Hat Linux Deployment Guide For further information, questions and comments please contact ask-smart-services@cisco.com
More informationV10.16 Unified Firmware Update. Release Notes & Installation Instructions
Intel Modular Server System MFSYS25V2 V10.16 Unified Firmware Update Release Notes & Installation Instructions RELEASE NOTES FOR: V10.16 A. RELEASE PACKAGE CONTENTS August 7, 2012 This section lists the
More informationEXPRESSSCOPE Engine User's Guide
EXPRESSSCOPE Engine User's Guide 4th Edition Dec, 2006 TRADEMARKS AND PATENTS Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries. Firefox
More informationThe instruction in this document is applicable on Cisco FireSIGHT Management Center FS2000 and FS4000 models.
Contents Introduction Prerequisite Hardware Requirements Procedures Step 1: Backup the Current Configuration and Data Step 2. Remove and Replace the Existing Storage Media Step 3. Reconfigure the RAID
More informationWA2592 Applied Data Science and Big Data Analytics. Classroom Setup Guide. Web Age Solutions Inc. Copyright Web Age Solutions Inc.
WA2592 Applied Data Science and Big Data Analytics Classroom Setup Guide Web Age Solutions Inc. Copyright Web Age Solutions Inc. 1 Table of Contents Part 1 - Class Setup...3 Part 2 - Minimum Software Requirements
More informationIntroducing Cisco UCS Central 1.3
This chapter includes the following sections: Overview of Cisco UCS Central 1.3 Features, page 1 Overview of Cisco UCS Central 1.3 Features Cisco UCS Central, release 1.3 allows you to take charge of the
More informationA-Scan Manager. Quick Reference Guide. Rev 1.04
A-Scan Manager Quick Reference Guide Rev 1.04 Table of Contents 1. Quick Start Guide 1.1. Installing the A-Scan Manager Software.....4 1.2. Launch the A-Scan Manager Applications..7 1.3. Simple Preferences
More informationTroubleshooting Autonomous Access Points
CHAPTER 3 This chapter provides troubleshooting procedures for basic problems with the autonomous access point (model: AIR-AP1131AG or AIR-AP1131G). For the most up-to-date, detailed troubleshooting information,
More informationManaging the Capability Catalog in Cisco UCS Manager
Managing the Capability Catalog in Cisco UCS Manager This chapter includes the following sections: Capability Catalog, page 1 Activating a Capability Catalog Update, page 3 Verifying that the Capability
More informationUsing the Prime Performance Manager Web Interface
3 CHAPTER Using the Prime Performance Manager Web Interface The following topics provide information about using the Cisco Prime Performance Manager web interface: Accessing the Prime Performance Manager
More informationLiveNX Upgrade Guide from v5.2.0 to v5.2.1
LIVEACTION, INC. LiveNX Upgrade Guide from v5.2.0 to v5.2.1 UPGRADE LiveAction, Inc. 3500 Copyright WEST BAYSHORE 2016 LiveAction, ROAD Inc. All rights reserved. LiveAction, LiveNX, LiveUX, the LiveAction
More informationUsing UCS-Server Configuration Utility
CHAPTER 3 This chapter contains the following sections: UCS-SCU Interface, page 3-1 Get System Updates, page 3-3 Configure a Server, page 3-5 RAID Configuration, page 3-5 OS Installation, page 3-8 Save
More informationGetting Started with CMS
CHAPTER 3 This chapter contains these sections that describe the Cluster Management Suite (CMS) on the Catalyst 3750 switch: Understanding CMS section on page 3-1 Configuring CMS section on page 3-8 Displaying
More informationAdministration of Cisco WLC
HTTP/HTTPS, SSH/Telnet to Cisco WLC, page 1 HTTP/HTTPS, SSH/Telnet to Cisco WLC Using the Controller GUI A browser-based GUI is built into each controller. It allows up to five users to simultaneously
More informationdctrack Quick Setup Guide Virtual Machine Requirements Requirements Requirements Preparing to Install dctrack
dctrack Quick Setup Guide This Quick Setup Guide explains how to install and configure dctrack. For additional information on any aspect of dctrack, see the accompanying dctrack Help in other its online
More informationServer Boot. Boot Policy. This chapter includes the following sections:
This chapter includes the following sections: Boot Policy, page 1 Boot Order, page 2 UEFI Boot Mode, page 3 UEFI Secure Boot, page 4 Cautions and Guidelines for Downgrading a Boot Policy, page 5 Creating
More informationSystem Manager Unit (SMU) Hardware Reference
System Manager Unit (SMU) Hardware Reference MK-92HNAS065-02 Notices and Disclaimer Copyright 2015 Hitachi Data Systems Corporation. All rights reserved. The performance data contained herein was obtained
More information