Wiring diagrams. Wiring diagrams for installers and planners. 1 LUXOMAT PD1, PD2, PD4, PD5-Clip and Indoor180 Master- and Slave 2 LUXOMAT PD2-24V
|
|
- Nathan Brown
- 6 years ago
- Views:
Transcription
1 Wiring diagrams Wiring diagrams for installers and planners 1 UXOMAT PD1, PD2, PD4, PD5-Clip and Indoor180 Master- and Slave 2 UXOMAT PD2-24V 3 UXOMAT PD1-DIM, PD2-DIM, PD4-DIM, PD3-2C-E 4 UXOMAT PD4, PD4-DUO and PD4-DUO-DIM 5 UXOMAT RC-plus 130/230/270, PD3-1C, PD4-1C, C-Click 140/200, CdS-R, CdS-T-AP 6 UXOMAT Indoor180-R, Indoor180-T, Indoor-180-SC 7 UXOMAT A5-RC-plus, FC150, FC500 8 UXOMAT A1 130, A4 130, AC-B, AC-K
2 Wiring diagrams for PD1, PD2, PD4-RC, PD5-RC 230 V and Indoor180 master- and slaveversion with external push button, manual switching possible (O-contact to be pressed for approx. 1 sec.) The potentiometers not to be set on Test or Sun otherwise the preadjusted values will get lost during this manual operation. Terminal connection for master-/slave-operation SAVE Terminal connection for parallel-operation R ' R R Master/Slave-operation with one master and several slaves. The master is the only unit to read in the lux levels and to switch the connected loads. The slave units will react on motion only, independently of the lux levels, by sending an impulse via the dry contact. The parallel-operation is not allowed for master units! Attention: The occupancy detector PD1 has only one -terminal! Terminal connection for master-/slave operation R 2 / SAVE-MODE R ' R ' Master/Slave-operation, i.e. masters operate as slaves but with additional push button function to switch the light manually. The preset values will not get lost. The master is the only unit to read in the levels and to switch the connected loads. The slave units will react on motion only, independently of the lux levels, by sending an impulse via the dry contact.
3 Wiring diagrams for PD2 24 V 24V ~ R1+R2 2x O pot.-free Version1 2x 3 A Version2 2x 0.1 A with external push button 24V ~ 24V, 0.1A R R+ 24V R1 R2 AC/DC R R+ 24V R1 R2 AC/DC, additional manual switching is possible (push the button approx. 2 sec.!). The potentiometers not to be set on Test or Sun, otherwise the preadjusted values will get lost during this manual operation. Terminal connection for master-/master operation 24V ~ 2x O dry contact 3 A resp. 0.1 A / SAVE-MODE R R+ 24V R1 R2 AC/DC R R+ 24V R1 R2 AC/DC Master/Slave-operation, i.e. masters operate as slaves.the master is the only unit to read in the lux levels and to switch the connected loads. The slave units will react on motion only, independently of the lux levels, by sending an impulse via the dry contact.
4 Wiring diagrams for PD1 DIM, PD2 DIM, PD4 DIM, PD3/E-2C Terminal connection for push button operation 1-10 VDC 1-10 VDC R ' S + R ' S + Push button operation. For manual switching push the button only a short time ( sec.)! To dim push the button until the wished light level is arrived. Terminal connection for master-/slave-operation 1-10 VDC SAVE R ' S + R R Master-/slave-operation. The master is the only one to read the light level and to switch the connected loads. Independant of the light level the slave units react to movements only by sending impulsions via the dry contact. o load can be connected to the dry contact. The master-dim-occupancy detectors can not be switched into parallel. For that application please prefer the master/slave installation. It is recommended to put the master the furthest possible position away from the natural light source. Wiring diagram for PD3/E-2C dry contact 3 A R ' S + Circuit like PD3-DE-1C, but additional with 2. dry contact (relay 2).
5 Wiring diagrams for PD4 w. opt. arc extinctions kit Permanent light operation with external switch Arc extinction kit R ' R ' Optional extension for switching of parallel inductors, rocker switches, fluorescent lamps etc. Switching is manually possible (permanent light operation). Permanent light operation with external push button R ', Additionally manual switching is possible. The C-contact is to press for approx sec. Terminal connection for PD4 DUO Slave Push button 2 Push b Terminal connection for DUO DIM Slave Channel V Channel V R S1 S2 ' ' R S ' + + Separate read of the lux levels for both channels and two switching channels! Separate read of the lux levels for both channels, but only one switching channel! For manual switching push the button only a short time ( sec.)! To dim push the button until the wished light level is arrived.
6 Wiring diagrams for RC-plus130/230/270, PD3-1C, PD4-1C, C140-Click, C200-Click and CdS-R/CdS-T-AP w. opt. arc extinctions kit ' Arc extinctions kit Optional extension for switching of parallel inductors, rocker switches, fluorescent lamps etc. Permanent light operation with external switch Permanent light operation with external push button Terminal connection for parallel operation ' ' ' ' Switching is manually possible (permanent light operation)., Additionally manuel switching is possible. The C-contact is to press for approx sec. Parallel operation with staircase switch ' Parallel operation together with a stair-case switch. Alternatively switching by either motion detector or staircase switch. Wiring diagram for CdS-R Wiring diagram for CdS-T-AP Photo electric switch CdS-R The light will be switched on and off depending of tlight level and timer settings The light will be switched on and off depending of tlight level and timer settings
7 Wiring diagrams for Indoor 180 with external push button ' ', additional manual switching is possible (C-contact to press approx. 2 sec.!). Permanent light operation with external switch Terminal connection for parallel operation ' Switching is manually possible. ' ' Parallel switching of max. 5 motion detectors Indoor180. Wiring diagrams for Indoor180-R, Indoor180-T, Indoor180-SC Parallel operation with a staircase switch Indoor180-SC Indoor180-R A2 B Activation of the staircase switch with the motion detector Indoor180-SC A1 4 Indoor180-T
8 Wiring diagrams for A5- RCplus, FC 150 and FC 500 Parallel operation Parallel switching of floodlights, but not more than two With external switch with external push button, manual switching is possible., additionally manual switching is possible. (C-contact to press for approx. 2 sec!). Operation with further floodlights Additional connection of further floodlights over contact is possible.
9 Wiring diagrams for A1, AC and A4 Operation with further light fixtures Additional connection of further light fixtures over contact is possible. Parallel operation with external push button Parallel switching of lamps., additionally manual switching is possible. (C-contact to press for approx. 2 sec!) With external switch Operation with further light fixtures, manual switching is possible. Additional connection of further light fixtures over contact is possible. Wiring diagrams for A4 with external push button, additionally manual switching is possible. (C-contact to press for approx. 2 sec!). Attention: Automatic-lights with VARIOMATIC-dimfunction cannot be put into parallel!
LUXOMAT Schematics for electricians and consultants
B.E.G. WIIG DIAGAMS FO MOTIO- AD OCCUPACY DETECTOS UXOMAT Schematics for electricians and consultants Index Wiring diagrams for outdoor and ceiling-mounted motion detectors Wiring diagrams for wall-mounted
More information3000-Series Interfaces. Connection examples series. LiveLink
3000-Series Interfaces For all interfaces. For even more freedom. Because demand for our sensors is growing and growing, we have aligned our 3000 series with the needs of our customers and complemented
More informationFSIR-100. User Guide. Wireless IR Commissioning Tool CONTENTS USING THE FSIR-100 COMMISSIONING TOOL BATTERIES
FSIR-100 Wireless IR Commissioning Tool User Guide CONTENTS Using The FSIR-100 Commissioning Tool... 1 Batteries... 1 Navigation... 2... 2 IR Communication... 2 Screens... 3 Home Menu...3...3...5...5 s...6
More informationBasic principles PL. Sending units
asic principles P P technology P (Plusink) is a system for controlling light. The system is based on a conventional electrical installation. ommands are sent via P, and there is no need for either software
More informationData sheet. Function description. Benefits
Function description To permit direct communication with the Philips SR interface, we offer two of our best and most innovative sensors: the ED PIR sensor with its patented multi-segment sensor lens and
More informationKNX SOLUTIONS FOR INTELLIGENT BUILDING CONTROL
. KNX www.beg-luxomat.com KNX SOLUTIONS FOR INTELLIGENT BUILDING CONTROL MEMBER LEGEND A Rated current Typ. power input Detection area Switching power Range (approx.) in m Lux value Degree of protection
More informationWAGO Lighting Management The Lighting Control Solution Stay in Control of Your System
WAGO Lighting Management The Lighting Control Solution Stay in Control of Your System OUR CONCEPT The Solution for Efficient Lighting Management in Production Facilities and Warehouses Using a combination
More informationLighting control for commercial buildings
[ INTELLIGENT SOLUTIONS ] Products and systems Lighting control for commercial buildings For management of different functions in a simultaneous and integrated way, via a BUS line Cost saving thanks to
More informationOperating instructions
Operating instructions DALI BASIC lighting control system Type: DALI RC BASIC SO 24.05.2001 / V1.0 OSRAM GmbH Hellabrunner Str. 1 D 81536 Munich Tel.: +49 89 6213 0 Fax: +49 89 6213 2020 Customer Service
More informationMini Recessed PIR. Model: PDFM360MINI. Installation & Operating Instructions
Mini Recessed PIR Model: PDFM360MINI Installation & Operating Instructions 1 1. General Information These instructions should be read carefully and retained for further reference and maintenance. 2. Safety
More informationVAMP 221. Table of Contents
2 V221/EN M/E019 VAMP 221 Table of Contents Table of Contents 1. General... 7 1.1. VAMP 221 arc protection system components... 7 1.1.1. Central unit VAMP 221... 9 1.1.2. I/O units VAM 12L / VAM 12 LD,
More informationKNX function and configuration
2 KNX function and configuration Introduction A presence detector monitors the detection zone for occupancy, and causes one or more actions to be executed when a person enters the detection area. In their
More informationLRI1655, LLC1655 Datasheet ActiLume 1-10V System
1/6 Product details The ActiLume 1-10 V luminaire-based sensor enables daylight regulation and dimming when no presence is detected. The delay time can be customized between 1 and 30 minutes. The ActiLume
More informationSeeTool - Solutions for KNX
SeeTool - Solutions for Office building segment Application 3.0.0.0.0.4 Movement dependent automatic light control, 2 room solution Lighting control functions The light is automatically switched ON when
More informationLITEDIMMER PLus. dc200 DUO. ac400 DUO USER GUIDE
LITEDIMMER PLus TM dc200 DUO LITEDIMMER PLus TM ac400 DUO USER GUIDE TM . INDEX Section Page About... 1 Controls and Connections...2 Power / Connect...3 Basic Display Navigation...4 Factory Reset...5 Local
More informationBlue Point Engineering
Blue Point Engineering SV203 Interface Overview Overview Sensors Light Sensor Motion Sensor Joystick Computer USB PORT Technical Pointing the Way to Solutions! T http://www.bpesolutions.com Animatronic
More informationHIGH BAY PASSIVE INFRARED OCCUPANCY SENSOR
HIGH BAY PASSIVE INFRARED OCCUPANCY SENSOR Product Overview The HB3x0 series occupancy sensors are designed for automatic lighting control in high bay applications. All models contain a passive infrared
More informationLUNA LUNA 111 top2 LUNA 112 top2 D GB F I E P , , Assembly and operating instructions Digital twilight switch
2 2 309 271 01 LUNA LUNA 111 top2 LUNA 112 top2 111 0 100, 111 0 200 112 0 100, 112 0 200 Ext L N Data + 4 5 6 C2 Ext1 Ext2 L N Data + GB Assembly and operating instructions Digital twilight switch MENU
More informationKNX DALI Gateway Plus - User Manual
KNX DALI Gateway Plus - User Manual Item No.: LC-013-064 1. Product Description The KNX DALI gateway Plus is the interface between the KNX installation and the DALI lighting system. It allows up to 64
More informationSwiss Garde 360 PresenceDALI Master A-Comfort 24 m
Installation instructions - Swiss Garde 360 Presence DALI Master A-Comfort m Art.-Nr. 750, 75, 76 - Edition 8-07 Swiss Garde 360 PresenceDALI Master A-Comfort m Edition UP Art.-Nr. 750, 75 360 H ca. 50%
More informationSMARTHOME RC-plus next 230 ZW
B.E.G. SMARTHOME RC-plus next 0 ZW Installation instructions and instructions of use GB. SMARTHOME Wireless Motiondetect, Type RC-plus next 0 ZW, Part o. 9066 white, Part o. 9074 black. How the device
More informationBlueWave ~ Intelligent Energy Control. Installation and User Manual for BW2/C and BW3/C versions. Quick Guide
BlueWave ~ Intelligent Energy Control Installation and User Manual for BW2/C and BW3/C versions Quick Guide Press button to override or activate Channel 1 Press button to override or activate Channel 2
More informationApplication description. Motion detector KNX- BCU
Application description Motion detector KNX-BCU Electrical/mechanical data: see the operating instructions for the product Order number Product designation Application programme TP product Radio product
More informationTECHNICAL MANUAL. 25H/DDA One button DDA audio intercom kit TECHNICAL MANUAL EDITION 1.1
TECHNICAL MANUAL 25H/DDA One button DDA audio intercom kit TECHNICAL MANUAL EDITION 1.1 INTRODUCTION The door entry kit has the following features: Electronic call tone - Upon a call being initiated, the
More informationApplication description
Manufacturer Berker Motion detector Application description KNX motion detector module comfort 1.10m KNX motion detector module comfort 2.20m ETS KNX motion detector module comfort 1.10m ETS KNX motion
More informationWizard- 3 Controller to Optional Track 1-4 Playback Set-up
Wizard- 3 Controller to Optional Track 1-4 Playback Set-up 09/24/09 REM-CH Header PINS Not Used 1-Pin G-Pin Track 1-4 ming Selection Switches Momentary Push Button () () () () Toggle Switch Toggle Switch
More informationThe Energy Savers. Universal dimmer switches, capacity enhancer and 1-10V controllers. Selection table for universal dimmer switches,
Universal dimmer switches, capacity enhancer and 1-10V controllers B The Energy Savers Selection table for universal dimmer switches, capacity enhancer and 1-10V controllers B0 Universal dimmer switch
More informationLLR-MOD Modbus Light Level and Occupancy Sensor
Product sheet SN1.418 Type LLR-MOD LLR-MOD Modbus Light Level and Occupancy Sensor The LLR-MOD sensors are designed to measure Light Level (LUX) in the room spaces and have built-in RS485 Modbus communication
More informationK-BUS R. Dimming Actuators. User manual-ver. 4 KA/D KA/D KA/D KA/D 04.T1.1 ADTV-04/16.1 KA/D 04.L1.1 ADLD-04/
Guangzhou Video-star Electronics Industrial Co., Ltd K-BUS R Dimming Actuators User manual-ver. 4 KA/D 0103.1 KA/D 0203.1 KA/D 0403.1 KA/D 04.T1.1 ADTV-04/16.1 KA/D 04.L1.1 ADLD-04/03.1...... KNX/EIB Intelligent
More informationPower consumption In operation At rest For wire sizing
echnical data sheet Modulating damper actuator for adjusting air control dampers in ventilation and airconditioning systems for building services installations For air dampers up to approx 08 m orque Nm
More informationswitching controlling counting
SAVE TIME ILLUMINATE CONNECT FEEL WELL ACCESSORIES Compact catalogue 2018 2019 Compact catalogue 2018 2019 SAVE TIME Digital time switches Digital time switches week Page 6 9 Digital time switches astro
More informationUse of the application program
Use of the application program Product family: Product type: Manufacturer: Name: Order no.: Output Controller Siemens UP 255/11 brightness controller or AP 255/12 brightness controller 5WG1 255-4AB11 or
More informationSimpler. Faster. Easier. DALI. RAPIX Lighting Control System
Simpler. Faster. Easier. DALI. RAPIX Lighting Control System DALI Lighting Control Made Easy Sometimes all your project needs, are some lighting control smarts, without incurring the costs of complicated
More informationACTsmart2 Product Range Operating and Installation Instructions
ACTsmart2 Product Range Operating and Installation Instructions 18-00045 Contents ORDERING INFORMATION......4 INSTALLATION NOTES......5 IMPORTANT......5 PRODUCT SPECIFICATION......5 30 SECOND PROGRAMMING
More informationVBAR 270. User Manual. Version 1.2
VBAR 270 User Manual Version 1.2 VBAR 270 User Manual Page 1of 19 Introduction Thank you for purchasing VBAR 270. VBAR 270 is a LED light fixture for professional use. Using the RGB color mixing technology
More informationPRESENCE DETECTOR, CONSTANT LIGHT CONTROLLER PD00D01KNX. Product Handbook
PRESENCE DETECTOR, CONSTANT LIGHT CONTROLLER PD00D01KNX Product Handbook Product: PD00D01KNX Description: PRESENCE DETECTOR, CONSTANT CONTROLLER Document Version: 1.3 Date: 03/10/2017 Tribunale di Mila
More informationLUNA LUNA 120 top2 D GB F I E P NL PL. Installation and operating instructions Twilight switch. LUNA 120 top2
2 309 272 01 LUNA LUNA 120 top2 GB 120 0 100 120 0 200 0 6 12 18 24 Installation and operating instructions Twilight switch MENU 1 OK 2 Lux 2000 LUNA 120 top2 D GB F I E P NL PL 2600 W 16A-10AX 250V~ 0,5mm
More informationLED DANCING FLOOR User Manual
LED DANCING FLOOR User Manual Introduction Unpacking: Thank you for purchasing the LED DANCING FLOOR. Every LED DANCING FLOOR has been thoroughly tested and has been shipped in perfect operating condition.
More informationVC2100 / VC MB Digital Event Recorder
VC2100 / VC2100 32MB Digital Event Recorder Product Description: This system includes one VS2100 single channel digital event recorder and one color camera. It will automatically have image capture or
More informationLSXR50 Sensor. Features pallet quantity. Descriptions
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category LSXR50 Sensor Lithonia Lighting LSXR50 Lithonia
More information2x 10W LED Slimline PIR Floodlight Twin Flood
2x 10W LED Slimline PIR Floodlight Twin Flood Model: LED200PIRBE Black Model: LED200PIRWHE White Installation & Operating Instructions 1 1. General Information These instructions should be read carefully
More informationOcean Controls KTA-224 Modbus IO Module
Ocean Controls Ocean Controls 8 Relay outputs (5A, 250VAC contacts) 4 Opto-Isolated Inputs with counters 3 Analog Inputs (10 bit) jumperselectable for 0-5V or 0-20mA 4 Input Counters RS485 or USB (virtual
More informationHDL KNX / EIB-BUS HDL KNX / EIB BUS M/HS05.1. (Intelligent Installation Systems) Product Manual. Contents
HDL KNX / EIB-BUS (Intelligent Installation Systems) Product Manual Contents 1-General... 3 1.1-Product Function... 3 2- Hardware... 4 2.1 Technical data... 4 2.2 Dimension drawings... 6 2.3 Wiring diagram...
More informationMake a confident stride through the stairwell with Eltako staircase time switches
15 Make a confident stride through the stairwell with Eltako staircase time switches 15 Staircase time switches and off-delay timers Selection table staircase time switches and off-delay timers 15-2 Staircase
More informationPOWER OVER ETHERNET. Technical Information. H.E. Williams, Inc. Carthage, Missouri
POWER OVER ETHERNET Technical Information PoE Technical Info Table of Contents PoE Lighting System Diagram...1 Example...1 PoE Gateway...2 Ordering Information...2 PoE Software & Service Packages...3 Ordering
More informationLED Lighting Control System Solution. Roadway Control Wireless Control Wired Control Sensor Control
LED Control System Solution Roadway Control Wireless Control Wired Control Sensor Control ( GigaTera ecology Service System ) Nowadays, lighting is not merely about the traditional concept of lighting
More informationInstallation Instructions
Please read all instructions before installing RS-350 PIR Dual Relay Universal Application Wall Switch Vacancy Sensor with Manual ON/OFF Lens Lighted Switch ON/OFF button for Relay 1 ON/OFF button for
More informationPower Load Controller F series INSTALLATION GUIDE
echoflex Powered by ETC ER1C-FLU Power Load Controller F series INSTALLATION GUIDE This guide covers the F series of the electronic Power Load Controller. The package includes the controller with locknut
More informationAbstractAVR. Ledbuddy controller. Ledbuddy Panel User Manual 2009 Abstract AVR and Sabre Technology Tel:
Ledbuddy Panel User Manual 2009 Abstract AVR and Sabre Technology Tel: 0116 278 8078 http://www.abstractavr.com AbstractAVR Ledbuddy controller Page 12 Introduction The LedBuddy is a simple yet powerful
More informationSTANDALONE INTERFACES USB-DMX 512 & 1024 CHANNELS V.1.0.5
STANDALONE INTERFACES USB-DMX 512 & 1024 CHANNELS V.1.0.5 SUMMARY Hardware technical specifications... 4 Top Face of the 512 / 1024 channels interfaces... 5 LED 7-segments display operation:... 5 LED 7-segments
More informationA1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 Controls:
Product name: Switching actuator 16fold / blind/shutter actuator 8fold Design: DIN rail mounting device Item no.: 1029 00 ETS search path: Gira Giersiepen / output / Binary output mix / switching act.
More informationEternal Lighting. Premier150 Spot. User Manual
Eternal Lighting Premier150 Spot User Manual Introduction: Thank you for your purchase of the Premier150 Spot. When unpacking and before disposing of the carton, check there is no transportation damage
More informationSWISS GARDE 360 HOKUSPOKUS KNX/KLR APPLICATION DESCRIPTION
SWISS GARDE 360 HOKUSPOKUS KNX/KLR APPLICATION DESCRIPTION MODEL TYPE NO. SG HOKUSPOKUS KNX/KLR 25010 Program version 2.7 2012 M. Züblin AG Neue Winterthurerstrasse 30, 8304 Wallisellen, Switzerland The
More informationZ-Wave AC Motor Shutter Controller
Works with: MI CASA VERDE VERA NEVO AEON LABS mcontrol ADT Pulse Z-Wave AC Motor Shutter Controller DHS-ZW-TMC-01 User Guide Z-Wave Technology for Automated Homes Z-Wave is a state of-the-art wireless
More informationDALI Series. DALI Wiring Diagram. TouchDIM Wiring Diagram L N. DALI Driver
DALI Series DALI Wiring Diagram DALI-130 DALI Bus Power Supply PC (DALI-100) DALI Master Controller Constant Voltage Decoder DALI6001 Panel DALI-GSC-4 Group/Scene Controller Constant Current Decoder DALI-S1L350C-0
More informationDALI Professional Frequently asked questions Light is OSRAM
www.osram.com DALI Professional Frequently asked questions Light is OSRAM DALI PROFESSIONAL Frequently Asked Questions What is the max. cable length in OSRAM DALI PROFESSIONAL system? Is it 300 m in total
More informationSecurimax is committed to growing and developing our security and sensor lighting range.
05 LIGHTING 209 Securimax is committed to growing and developing our security and sensor lighting range. Securimax are continuing to introduce to the market high quality products, whilst providing a service
More informationSpringtree Spatial Wash COB RGBW
Springtree Spatial Wash COB RGBW USER MANUAL AND INSTALLATION GUIDE Table of Contents 1. Before You Begin What is included...3 If parts are missing or damaged...3 Safety precautions...3 2. Product Information
More informationStandard Options. Model 4100 Position Indicating Meter. Three Phase Motor Control. Positran Transmitter
Standard Options Model 4100 Position Indicating Meter A percent-of-full-travel meter is supplied with a trim potentiometer resistor, terminal block and connectors. A potentiometer is required in the actuator
More informationGENERAL. Q: IS AUDACY MADE IN THE USA? A: YES: Made in the USA from US and Global Components.
FREQUENTLY ASKED QUESTIONS 2018 GENERAL Q: IS AUDACY MADE IN THE USA? A: YES: Made in the USA from US and Global Components. Q: WHERE DID THIS TECHNOLOGY COME FROM? A: The core technology was pioneered
More informationControl unit for lux control, MDRC Type: SL/S 50.1, GH Q R0001
SK 0012 B 98 The control unit is a DIN rail mounted device for insertion in the distribution board. It is used to control digitally dimmable electronic ballast devices or transformers via the EIB. In a
More information1 IF-812 or IF-815 Terminal (Slave) 2 Intended Use. 3 Assembly and Installation _V IF-812/IF-815
95-10324_V2016-11-23 IF-812/IF-815 1 IF-812 or IF-815 Terminal (Slave) Thank you for choosing an Interflex system. With an IF-812 or IF-815 terminal (slave), you have purchased a reliable device for capturing
More informationLIGHTING CONTROLS PICTURED: ESL VISION 265W LED AREA LIGHTS WITH 50CC OCCUPANCY SENSOR, 0-10V DIMMING
2 0 1 8 PICTURED: ESL VISION 265W LED AREA LIGHTS WITH 50CC OCCUPANCY SENSOR, 0-10V DIMMING OCCUPANCY SENSORS WITH SEVERAL OCCUPANCY SENSORS TO CHOOSE FROM, ESL VISION HAS A SOLUTION FOR YOUR APPLICATION.
More information1 IF-810 or IF-811 Terminal (Slave) 2 Intended Use. 3 Assembly and Installation _V IF-810/IF-811
95-10326_V2016-10-20 IF-810/IF-811 1 IF-810 or IF-811 Terminal (Slave) Thank you for choosing an Interflex system. With an IF-810 or IF-811 terminal (slave), you have purchased a reliable device for capturing
More informationRoom Combine using LL-EVO and Echo Control Technical Bulletin
Room Combine using LL-EVO and Echo Control Technical Bulletin This document details a control operation for two conference rooms that allows for automatic room combine operation and AV system interfacing.
More informationDatasheet RCUXXYY EAE KNX Room Control Unit RCUXXYY DT R1.0. General Description. EAE Technology Page 1/10
General Description Room Control Unit RCU Series are designed as an all in one product for different room layouts such as apartments, hotel rooms, hospitals and residences. Available versions of EAE RCU
More informationProject Planning. Module 4: Practice Exercises. Academic Services Unit PREPARED BY. August 2012
Project Planning PREPARED BY Academic Services Unit August 2012 Applied Technology High Schools, 2012 Module Objectives Upon successful completion of this module, students should be able to: 1. Select
More informationThe 8-fold switch actuator is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via a bus terminal.
, GH Q631 0047 R0111 The 8-fold switch actuator is a DIN rail mounted device for insertion in the distribution board. It is connected to the EIB via a bus terminal. Using eight floating contacts, it switches
More informationLDALI ME204-U, LDALI ME201 U
Functions BACnet/ Controller L ME204-U, L ME201 U BACnet CEA 709 Modbus OPC Datasheet #89021219 L WEB, L STUDIO L Controllers are multifunctional devices combining constant light con trol, sunblind control
More information920 Remote Control (RC) Switches
920 Remote Control (RC) Switches ASCO is the global leader in power switching and controls ASCO 920 PRODUCT SPECIFICATIONS SWITCH ONLY (PANELBOARD MOUNTING) 1,2,3 () DIMENSIONS, IN.(MM) WIDTH HEIGHT DEPTH
More informationFuture Designs, Inc. Your Development Partner LCD DEMO KITS
Future Designs, Inc. Your Development Partner www.teamfdi.com LCD DEMO KITS LCD DEMO Kit Family LCD-DEMO-KIT LCD-DEMO-SC LCD-DEMO-LPC2158 LCD-DEMO-Family Each kit uses a multiplexed 8 digit liquid crystal
More informationAC Power Management field for 20 years Expanding to Complement and Protect DSP Processors, Amplifiers, and IP Products Innovation, Protection,
AC Power Management field for 20 years Expanding to Complement and Protect DSP Processors, Amplifiers, and IP Products Innovation, Protection, Convenience, Value Sequencers ETA-S15L 15A / 1800W Power Conditioning
More information5. LAMP INSTALLATION The lamp holder for the double ended lamps is a K12x30s socket. A A Sliding Mechanism (for locking & unlocking the lamp) B Fixed Holder C Wire Holder B C To install the lamp: 1 Unlock
More informationNE400 - LED MOTION LIGHT WITH VIDEO CAMERA
USER MANUAL NE400 - LED MOTION LIGHT WITH VIDEO CAMERA Table of contents 1. Contents of package 2. NightWatcher NE400 Motion Light with Video Camera 3. Assembly 4. Installation 5. Programming your NightWatcher
More informationAimtec s Lighting Solution
Aimtec s Lighting Solution 1 AC/DC LED Drivers 2 Lighting Outdoor Highbay lights Street lights Flood lights Key Cold startup temperature: -40 C or -55 C 40W and up to 250W Input Voltage up to 305VAC IP67
More informationALO Duo Roll DMX LED barrel scanner with dual light source
ALO Duo Roll DMX LED barrel scanner with dual light source User manual Safety instructions WARNING! Always keep this device away from moisture and rain! Hazardous electrical shocks may occur! WARNING!
More informationE3X-NA. Adjuster type standard that is the culmination of true ease and simplicity. Super Manual Fiber Amplifier. Features
Super Manual Fiber Amplifier Adjuster type standard that is the culmination of true ease and simplicity Features Self-explanatory LED bar displays of light levels The previous manual type used the stability
More informationQUICK START. Installation & Programming Guide
QUICK START Installation & Programming Guide PRECAUTIONS READ AND FOLLOW ALL SAFETY INSTRUCTIONS. CAUTION - RISK OF ELECTRICAL SHOCK. To prevent electrical shock, turn off power at the circuit breaker
More informationWireless Control Systems
Wireless Control Systems Leading the way in intelligent automation contents Range Overview Typical Installations Transmitters Combined Modules Receivers Accessories Programming Switching & Dimmer Functions
More informationTechnical specification Marine Master Clock
Page: 1 av 5 Technical specification Marine Master Clock 1 2 1 0 A MON 24 APR 2006 21.07:36 LT ALARM POWER RADIO LINK NO LT UTC LT General The master clock has 6 buttons and one (2 line x 16 character)
More informationE600 VX01 Installation guide
E600 VX01 Installation guide illuminfx Dimensions 2007 Viso Systems ApS, Denmark All rights reserved. No part of this manual may be reproduced, in any form or by any means, without permission in writing
More informationDALI Installations Application AEL-DALI
DALI Installations Application AEL-DALI Engineering and Technical Teaching Equipment INTRODUCTION The advent of digital dimming offers a new option with clear advantages over traditional analog dimming.
More information4 channel PD tester for semiconductor test TPP
4 channel PD tester for semiconductor test TPP New! Up to 18.3kV peak (13kV rms) Multi channel Partial discharge test system for check up the safety electric isolation of electronic components (e.g. opto
More informationElectrical devices may only be mounted and connected by electrically skilled persons.
DALI gateway TW Art. No. : 2099REGHE Operating instructions 1 Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property
More informationKrontek KT160 Digital Clock
Krontek KT160 Digital Clock Operators Manual Krontek KT160 Rev 4.12a 1 SETUP OVERVIEW All settings are via three pushbutton keys on the rear of the clock: The SYSTEM key, the TIME key and the ADJUST key.
More informationOperating instructions only for authorized, skilled electricians with EIB training
73-1 - 6122 25054 ABB i-bus EIB 1-fold Switching Actuator/Sensor 6110 U-500 GJB 000 6151 A0162 flush-mounted Operating instructions only for authorized, skilled electricians with EIB training Contents
More informationAs soon as the luminaires are switched off, the built-in relay disconnects the control gear from the mains supply, reducing power loss to 0.5 W.
luxcotro smartdim Control with ambient light sensor/push to make switches/pir sensor Digital DSI sensor module for controlling 5 digital, electronic ballasts. By connecting a sensor, the connected /TE
More informationPush Button Interface UP 220D31
Product and Applications Description Application programs UP 220/31 07 B0 S4 On-off-toggle/Dim/Shu/Value 982203 The push button interface is a binary input and output devices for installation in in-wall
More informationKNX Gateway RGK02E Operating Instruction
KNX Gateway RGK02E5023-01 Operating Instruction Inhalt 1 General...4 1.1 Technical data...4 1.2 Intended Use...4 1.3 Specifications...5 1.4 Compatibility...5 1.5 Scope of delivery...5 2 Information about
More informationTel Fax: Toll free:
ELECTRONIC CONTROL UNIT (cod. 2302B Series) for swing gates automation (Mini Tank Series) C5 Accessories power supply: 24V dc Max 200 ma T1 Trimmer regulation: Operating times Open pause time Leaf delay
More informationTABLE OF CONTENTS 1. FEATURES SPECIFICATIONS General Specifications Electrical Specifications...3
DIGITAL LIGHT METER TABLE OF CONTENTS 1. FEATURES... 1 2. SPECIFICATIONS... 1 2-1 General Specifications...1 2-2 Electrical Specifications...3 3. FRONT PANEL DESCRIPTION...4 3-1 Display... 4 3-2 Power
More informationAcuity Relay Panel User Guide
Acuity Relay Panel User Guide 1 of 26 Table of Contents Installation and Troubleshooting 1.1 - Powering Up the Panel... 3 1.2 - LED Blink Codes On Relay Control Card... 5 1.3 - Testing Relay and Dimming
More informationMini Contactors & Overloads
108 Mini s & Overloads GMC-12M Surface or DIN rail mountable UL508 compliant 1/ to 7-1/ 50/60Hz AC and DC versions available Direct-mounting overloads RoHS compliant Auxiliary contacts standard (1 N.0.)
More informationElectrical installation systems catalogue
14 15 Electrical installation systems catalogue Light and energy management Time switches, dimmers, motion and presence detectors Smart design when managing energy and resources in residential and commercial
More informationControl/actuator AM5851M2 H4671M2 LN4671M2
Description This device, with 4 pushbuttons and 4 two-colour LEDs at the front, is fitted with 2 independent relays to control: - 2 loads or 2 groups of loads that are independent; - 1 single load (rolling
More informationUser Guide IR Series
User Guide IR Series for IR-8DI8DO-RJ45W info@tracksysnet.com www.tracksysnet.com 1. Safety Precautions... 3 2. Introduction... 4 3. Electronics Parameters... 6 4. Short Setup guide for IR-8DI8DO-RJ45W...
More informationLITETOUCH HYBRID WALL BOX DIMMER INSTALLATION INSTRUCTIONS
READ INSTRUCTIONS PRIOR TO INSTALLATION OF EQUIPMENT OR YOU MAY VOID THE WARRANTY! LITETOUCH INSTALLATION INSTRUCTIONS The LiteTouch Hybrid Wall Box Dimmer is a configurable lighting control device, that
More informationASCO 920 Remote Control (RC) Switches
Maximum reliability and excellent value ASCO 920 Remote Control (RC) Switches ASCO 920 Remote Control Switch in Type Enclosure The ASCO 920 is designed as a feeder disconnect switch for load capacities
More informationFour interchangeable lenses - high mount 360º, low mount 360º, high mount aisleway, and small motion 360º
Catalog Number Type PRODUCT OVERVIEW The Family of fixture mount occupancy sensors provides reliable and versatile solutions for commercial and industrial lighting control applications. All Family sensors
More informationProduct and functional description
Product and functional description The instabus / DAI gateway 141 is a KX EIB device with one DAI output to which up to 64 DAI actuators (e.g. DAI ballasts) can be connected to. It is not allowed to connect
More information