Solid State Relay KSI240 Series 1-Phase AC Output
|
|
- Maximillian Strickland
- 6 years ago
- Views:
Transcription
1 Solid State Relay KSI24 1-Phase AC Output Zero switching or instant-on Ratings from 1A to 48-28VAC SCR output for heavy industrial loads AC or DC input DBC substrate for superior thermal performance Opto-isolation: >4VACrms LED indication Internal RC/MOV and TVS protection circuit as option Product Description KSI24 series industrial, 1-phase relay with antiparallel thyristor output is the most widely used industrial SSR due to its multiple application possibilities. The relay can be used for resistive, inductive and capacitive loads. The control input voltage is 4-32VDC or 85-28VAC, output currents 1A,25A, 4A, 6A, 8A and 1A.@ 48-28VAC. Product Selection KSI 24 D/A 25 R -L M KSI Line Voltage 24:24VAC Control Voltage D:DC Control A:AC Control Load Current 1:1Amp 25:25Amp 4:4Amp 6:6Amp 8:8Amp 1:1Amp Switch Mode None:Zero R:Random-on L: LED M:MOV T:TVS (Options) Description 1A 25A 4A 6A 8A 1A KSI24D1 KSI24D25 KSI24D4 KSI24D6 KSI24D8 KSI24D1 D:3-32VDC KSI24D1R KSI24D25R KSI24D4R KSI24D6R KSI24D8R KSI24D1R AC:85-28VAC KSI24A1 KSI24A25 KSI24A4 KSI24A6 KSI24A8 KSI24A1 Technical Specification Input Circuit Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Maximum Input Current 4-32VDC 85-28VAC 4VDC 85VAC 1VDC 1VAC 25mA 1mA
2 Output Circuit Load Voltage Maximum Turn-On Time Maximum Turn-Off Time Maximum Surge Current ms ) Transient Overvoltage Maximum Off-State Leakage Current [@ Rated Voltage] Maximum On-State Voltage Drop [@ Rated Current] Minimum Off-State Maximum Rated Voltage] General Information Dielectric Strength, Input/Output/Base (5/6Hz) Ambient Operating Ambient Storage Weight (typical) Application Random-On Zero-On 1A 25A 4A 6A 8A 1A 48-28VAC 1mS 1/2AC Cycle + 1mS 2mS 1/2AC Cycle + 1mS 4mS 1A 25A 4A 6A 8A 125A 6Vpk 5mA 1.7Vrms 5V/μS 4Vrms min. -3 C +8 C -3 C +1 C High-low Temperature Chamber, Plastics Machinery, Incubation Machine, Oiling Machine; HVAC,Elevator, Lighting, Fountain Controller Installation g Ø max. 2.2 max. 2-M3 2-M max max
3 Thermal Curve 1A Module A Module A Module 8 6 A Module A Module 12 1A Module Important Notice 1. When the ambient temperature is over 4 C or many KSI series are installed closely together, the user should take load discount into account according to the thermal curve. 2. If the load current is over 5A, suitable heatsink should be added to the SSR. Product Certification This product is a supplementary product for the European market and only available through Song Chuan Europe. It is manufactured Kudom Electronics Technology, China. Im Petersfeld 5 D Altendiez Phone: Fax: info@songchuan.eu
4 Solid State Relay KSI48 Single Phase AC Output Zero switching or instant-on Ratings from 1A to VAC SCR output for heavy industrial loads AC or DC input DBC substrate for superior thermal performance Opto-isolation: >4VACrms LED indication Internal RC/MOV and TVS protection circuit as option Product Description KSI48 series industrial single phase relay with SCR output is the most widely used in industry application. The relay can be used for resistive, inductive and capacitiveloads. The control input voltage is 4-32VDC or 85-28VAC, output current rate 1A, 25A, 4A, 6A, 8A and 48-53VAC. Product Selection KSI Line Voltage 48:48VAC Control Voltage D:DC Control A:AC Control Load Current 1:1Amp 25:25Amp 4:4Amp 6:6Amp 8:8Amp 1:1Amp Switch Mode None:Zero R:Random-on L:LED M:MOV T:TVS (Options) Description 1A 25A 4A 6A 8A 1A KSI48D1 KSI48D25 KSI48D4 KSI48D6 KSI48D8 KSI48D1 D:3-32VDC KSI48D1R KSI48D25R KSI48D4R KSI48D6R KSI48D8R KSI48D1R AC:85-28VAC KSI48A1 KSI48A25 KSI48A4 KSI48A6 KSI48A8 KSI48A1 Technical Specification Input Circuit Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Maximum Input Current 4-32VDC 85-28VAC 4VDC 85VAC 1VDC 1VAC 25mA 1mA
5 Output Circuit Load Voltage Maximum Turn-On Time Maximum Turn-Off Time Maximum Surge Current ms) Transient Overvoltage Maximum Off-State Leakage Current Rated Voltage] Maximum On-State Voltage Drop Rated Current] Minimum Off-State Maximum Rated Voltage] General Information Dielectric Strength, Input/Output/Base (5/6Hz) Ambient Operating Ambient Storage Weight (typical) Application Random-On Zero-On 1A 25A 4A 6A 8A 1A 48-53VAC 1ms 1/2AC Cycle + 1ms 2ms 1/2AC Cycle + 1ms 4ms 4A 6A 64A 86A 128A 155A 12Vpk 5mA 1.7Vrms 5V/μs 4Vrms min. -3 C +8 C -3 C +1 C High-low Temperature Chamber, Plastics Machinery, Incubation Machine, Oiling Machine, HVAC, Elevator, Lighting, Fountain Controller. Installation g Ø max 2.2 max. 2-M3 2-M max max
6 Thermal Curve 2 1A Module 5 25A Module A Module A Module A Module 12 1A Module Important Notice 1. When the ambient temperature is over 4 C or many KSI series are installed closely together, the user should take load discount into account according to the thermal curve. 2. If the load current is over 5A, suitable heatsink should be added to the SSR. 3. Plastic cover can be option depends on application to reach IP2. Product Certification This product is a supplementary product for the European market and only available through Song Chuan Europe. It is manufactured Kudom Electronics Technology, China. Im Petersfeld 5 D Altendiez Phone: Fax: info@songchuan.eu
7 Solid State Relay KSI6 Single Phase AC Output Zero switching or instant-on Load current: 48-66VAC SCR output for heavy industrial loads AC or DC input DBC substrate for superior thermal performance Opto-isolation: >4VACrms LED indication Internal RC/MOV and TVS protection circuit as option Product Description KSI6 series industrial single phase relay with SCR output is the most widely used in industry application. The relay can be used for resistive, inductive and capacitiveloads. The control input voltage is 4-32VDC or 85-28VAC, output current rate 1A, 25A, 4A, 6A, 8A, 48-66VAC. Product Selection KSI Line Voltage 6:6VAC Control Voltage D:DC Control A:AC Control Load Current 1:1Amp 25:25Amp 4:4Amp 6:6Amp 8:8Amp 1:1Amp Switch Mode None:Zero R:Random-on on L:LED M:MOV T:TVS (Options) Description 1A 25A 4A 6A 8A 1A DC:4-32VDC AC:85-28VAC KSI6D1 KSI6D25 KSI6D4 KSI6D6 KSI6D8 KSI6D1R KSI6D25R KSI6D4R KSI6D6R KSI6D8R KSI6D1 KSI6D1R KSI6A1 KSI6A25 KSI6A4 KSI6A6 KSI6A8 KSI6A1 Technical Specification Input Circuit Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Maximum Input Current 4-32VDC 85-28VAC 4VDC 85VAC 1VDC 1VAC 25mA 1mA
8 Output Circuit Load Voltage Maximum Turn-On Time Maximum Turn-Off Time Maximum Surge Current ms) Transient Overvoltage Maximum Off-State Leakage Current Rated Voltage] Maximum On-State Voltage Drop Rated Current] Minimum Off-State Maximum Rated Voltage] General Information Dielectric Strength, Input/Output/Base (5/6Hz) Ambient Operating Ambient Storage Weight (typical) Application Installation Random-On Zero-On 1A 25A 4A 6A 8A 1A 48-66VAC 1ms 1/2AC Cycle + 1ms 2ms 1/2AC Cycle + 1ms 4ms 1A 25A 4A 6A 8A 125A 18Vpk 5mA 1.7Vrms 5V/μs 4Vrms min. High-low Temperature Chamber, Plastics Machinery, Incubation Machine, Oiling Machine, HVAC, Elevator, Lighting, Fountain Controller C ~ +8 C -3 C ~ +1 C 85g Ø max 2.2 max. 2-M3 2-M max max
9 Thermal Curve 2 1A 5 25A A 8 6 A A 12 1A Important Notice 1. When the ambient temperature is over 4 C or many KSI series are installed closely together, the user should take load discount into account according to the thermal curve. 2. If the load current is over 5A, suitable heatsink should be added to the SSR. 3. Plastic cover can be option depends on application to reach IP2. Product Certification This product is a supplementary product for the European market and only available through Song Chuan Europe. It is manufactured Kudom Electronics Technology, China. Im Petersfeld 5 D Altendiez Phone: Fax: info@songchuan.eu
10 Solid State Relay Accessory Protection Cover Apply for KSI, KSJ single phase Dimension: 57.5 * 44.6 * 24 mm Weight: 9.3 g Product Selection KPC :Single Phase Type Number KPC-A (mm) This product is a supplementary product for the European market and only available through Song Chuan Europe. It is manufactured Kudom Electronics Technology, China. Im Petersfeld 5 D Altendiez Phone: Fax: info@songchuan.eu
11 Solid State Relay Accessory Thermal Pads Low thermal resistance KTP-1A apply for KSI KSJ single phase KTP-3A apply for KMS, KMT, KMTY, KSQ, KSQC three phase Product Selection KTP 1:Single Phase Type 3:Three Phase Type Number KTP (mm) 62. KTP-1A R KTP-3A R This product is a supplementary product for the European market and only available through Song Chuan Europe. It is manufactured Kudom Electronics Technology, China. Im Petersfeld 5 D Altendiez Phone: Fax: info@songchuan.eu
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED Types RAM1A, RAM1B
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED Types RAM1A, RAM1B Zero switching (RAM1A) or instant-on switching (RAM1B) AC Solid State Relay Direct copper bonding (DCB) technology LED indication
More informationMODEL NUMBERS OUTPUT SPECIFICATIONS 1 Zero Voltage and Random Turn-On Switching Panel Mount 600V Transient Capability Internal Snubber 110 & 125A Mode
MODEL NUMBERS OUTPUT SPECIFICATIONS 1 Zero Voltage and Random Turn-On Switching Panel Mount 600V Transient Capability Internal Snubber 110 & 125A Models Available Integrated Overvoltage Protection by Automatic
More informationSERIES VAC PANEL MOUNT
SERIES VAC PANEL MOUNT Features Ratings from A to A @ VAC SCR output for heavy industrial loads Zero voltage or instantaneous turn-on outputs UL/CSA/VDE Approved, CE Compliant to EN69- Improved SEMS screw
More informationSeries SD. Series Switch Type 2 Feature 3 Line Voltage 1 Output Current - Amps. Dual Output to 50A 600 Vac DC Control Solid-State Relay
Dual Output to 5A Vac FEATURES/BENEFITS The Series SD dual-phase relays are designed for all types of loads. The design incorporates two relays in a single package. The relays utilize optical isolation
More informationSeries LS. 30A to 600 Vac SIP Package DC control LS 24 D 16 C. Figure 1 LS relays; dimensions in inches (mm) (See Figure 12 for LS with HS1)
3A to 6 Vac SIP Package DC control Part Number LSD16C LSD1C LS6DC LSD7C LS6D7C LS6D3C Description 16A, Vac 1A, Vac A, 6 Vac 7A, Vac 7A, 6 Vac 3A, 6 Vac Part Number Explanation LS D 16 C NOTES 1) Line Voltage
More informationRelays & Sockets. RSC Series. RSC Series Solid State Relays. Part Number Selection Specifications
RSC Series RSC Series Solid State Relays Key features of the RSC series include: Slim design allows for DIN rail or panel mounting Built-in heat sink maximizes current output capability Epoxy-free design
More informationZelio Relay - Solid State Relays
Selection guide Applications Panel mounted PF--Q Contact type N/O SPST contact Control voltage ranges a V c SCR output : V Mosfet output :. V Operating voltages a V, V, V c V Type of switching a Zero voltage
More informationSOLITRON MINI - With Integrated Heatsink Types RJ1A, RJ1B
Solid State Relays SOLITRON MINI - With Integrated Heatsink Types RJ1A, RJ1B AC semiconductor contactor Zero switching (RJ1A) or instant-on switching (RJ1B)1 Direct copper bonding (DCB) technology LED-indication
More informationNEW Series SSH Output to 75A, 510 Vac with Diagnostics High Industrial Performance (HIPpak) Solid-State Relays
FEATURES/BENEFITS Zero-cross models with system diagnostics Very low zero-cross turn-on voltage Input and output protection and control LED standard IP20 protection by flaps on terminals With double removable
More informationIntroduction. Features. Applications DR45 SERIES AC SINGLE PHASE OUTPUT DIN RAIL MOUNT SSRS PRODUCT SELECTION
DR45 SERIES AC SINGLE PHASE OUTPUT DIN RAIL MOUNT SSRS Introduction The DR45 is a powerful and compact solid state relay in a DIN rail 45mm wide package with an output rating up to 6 Amps @ 4 C offering
More information(Applicable output load) to 264 (see note 2) (see note 1) (2Aat75to264VAC) G3R-202SLN-US PCB Yes 2 A at 100 to 120 VDC. (2 A at 75 to 132 VDC)
Solid-state Relay Compact SSRs Ideal for Built-in Applications Vertical, compact SSRs with an operation indicator offered in versatile variations. Can be mounted side by side with an electromagnetic relay
More informationPMP SERIES PROPORTIONAL CONTROL SOLID STATE RELAYS Introduction
PMP SERIES PROPORTIONAL CONTROL SOLID STATE RELAYS Introduction The PMP Series of micro-controller based Single-Phase Proportional Control SSRs are designed to offer precise control of the power delivered
More informationModel Number Structure
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Solid State Relays G3 @-VD CSM_G3F_G3FD_DS_E_2_1
More informationPR - PCB relay. 42 catalog 2002 e / the PR-PCB relay. By using best materials and because of the simple construction the highest failsecurity
PR - PCB relay the PR-PCB relay PCB-Relay from the PR family are small relays. The version has forced guided contacts, 2 normally open contacts, 2 normally closed contacts. In the industrial electronic
More informationBulletin 700-SH Solid-State Relays. Overview/Product Selection. Bulletin 700-SH. Product Selection
Overview/Product Selection Bulletin 700-SH 40 A (resistive) Max. Continuous (Output) Current with Heat Sink 264V AC or 528V AC Max. Voltage Range Options 5 24V DC, 100 120V AC, 200 240V AC Control Input
More informationSM320A~SM3200A SCHOTTKY DIODE REVERSE VOLTAGE 20 TO 200V FORWARD CURRENT 3.0A
320A~3200A DESCRIPTION The 320A~3200A are available in A Package. ORDERING INFORMATION Package Type Part Number 320A 340A 360A 380A A 3100A 3120A 3150A 3200A Note 5,000pcs/Reel AiT provides all RoHS Compliant
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
More informationG3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
More informationMOS FET Relay. Ordering Information. Application Examples G3VM- XN(F)/4N(F)
MOS FET Relay G3VM- XN(F)/4N(F) SSR for Switching Analog Signals, with an I/O Dielectric Strength of 2.5 kvac Using Optical Isolation Switches minute analog signals. Linear voltage and current characteristics.
More informationSSR SERIES MODULES AND BACKPLANES
USER GUIDE SSR SERIES MODULES AND BACKPLANES Introduction This guide describes the mechanical and electrical aspects of the solid state relay (SSR) Series modules and backplanes. It also describes how
More informationModel Number Structure
Solid State Relays CSM DS_E_3_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
More informationAdvantages of a Full Featured 700 Series Relay
SECTION 1 Advantages of a Full Featured 700 Series Relay Since the launch of the 700 series relays in 2000, this product line has continuously evolved both functionally and visually. The 700 series product
More informationModel Number Structure
Solid State Relays CSM DS_E_2_1 I/O SSRs That Mount to OMRON s G7TC I/O Block Input and output modules are available in wide variety. Snaps easily into P7TF I/O Terminals and can be used together with
More informationG3B/G3BD. Model Number Structure. Ordering Information. Solid State Relays Model Number Legend. List of Models
Solid State Relays G3@-VD CSM_G3B_G3BD_DS_E_5_1 International Standards for G3B Series, Same Profile as MK Power Relays Shape-compatible with mechanical relays. Certified by UL, CSA, and VDE (models numbers
More informationSNAP Digital Output Modules. SNAP Digital Output Modules. Features. Description
Features Four channels per module Convenient pluggable wiring terminals; accepts up to 14 AWG wire Powered by a single 5-volt supply Channel-specific LEDs Operating temperature: 0 to 70 C UL and CE approved
More informationRM22TG. Product data sheet Characteristics. three-phase control relay Vac, 2 C/O. Main. Complementary. Network number of phases
Characteristics three-phase control relay 183 528Vac, 2 C/O Main Range of product Product or component type Relay type Network number of phases Relay name Relay monitored parameters Time delay type Switching
More informationNote: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range.
I/O Block Base G7A Reduces Wiring while Providing I/O Flexibility Mount I/O relays and I/O SSRs freely. Electric-shock preventive (finger-touch protection) terminal block incorporated conforming to VDE
More information1-DC SERIES PANEL MOUNT
1DC SERIES PANEL MOUNT Features Ratings from 6 A to 1 A @ 1 DC Mosfet Output UL Approved, CE Compliant to EN6951 Improved SEMS screw and washer Redesigned housing with antirotation barriers DC control
More informationC B. Models. Ultra wide 4:1 input voltage 20 W DC/DC. edition and EN55032 class A
DC/DC Converter Ultra wide 4:1 input voltage 20 W DC/DC converter in a 1.6 x 1 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
More informationEZ-ZONE ST. EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements of Your System Easy SPECIFICATION SHEET
EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements of Your System Easy EZ-ZONE ST 75 ampere configuration SPECIFICATION SHEET EZ-ZONE ST 40 ampere full configuration with mechanical
More informationEfficiency (typ.) (Range) VDC VDC ma ma(typ.) ma (typ.) ma(typ.) VDC μf % MKW15-12S05M. Output Current Input Current Reflected Ripple
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Range Fully Regulated Output I/O Isolation 40VAC with Reinforced Insulation, rated for 300VAC Working Low Leakage Current < 5µA Operating Ambient
More information(75 to 264 VAC) 12 VDC 24 VDC No 5 VDC G3MC-202PL 12 VDC 24 VDC
Solid State Relay G3MC Compact, Thin-profile, Low-cost SSR with Reinforced Insulation Small bottom surface area (approx. 80% of the conventional G3MB s), ideal for close PCB mounting. DC input and AC output
More informationThe PCI Series. Precise power control for complex SCR applications. Phase Angle Fired SCR Power Controls AMPS VAC
The PCI Series Phase Angle Fired SCR Power Controls 25-1200 AMPS 120-600 VAC Precise power control for complex SCR applications. ROBICON 1996 Distributed Worldwide by www.mcgoff-bethune.com Applications
More information9926 Series Branch Rated Circuit Breakers AC Version
Branch Rated AC Version Hydraulic Magnetic Single pole and double pole versions 20/240 VAC, 50/60 Hz Up to 25A Just 3 mm wide Mounts on 35mm DIN-rail UL 489 listed, CSA C22.2 No. 5-02, CE VDE Ordering
More informationRelay Deck Datasheet
Datasheet SA13731 General The provides a number of relays for user control. Its mechanical relays allow switching high power loads and its solid-state relays provide an alternative for lower-power loads.
More informationEZ-ZONE ST. EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements of Your System Easy
EZ-ZONE ST 75 ampere configuration 40 ampere full configuration with mechanical contactor configuration with only the controller and SSR EZ-ZONE ST Integrated Control Loop Makes Solving the Thermal Requirements
More informationFEATURES. Nominal Output Voltage and Current
5W, AC-DC converter FEATURES 85-264V Universal AC or wide 100-370V DC Input Operating ambient temperature range: -40 to +85 High I/O isolation test voltage of up to 4000VAC Regulated output, Low ripple
More informationTimers. GT5Y Series ON Delay Timers. ±3% maximum (over 10 to 50 C, reference temperature 20 C) Setting Error. ±10% maximum
GT5Y GT5Y Series ON Delay Key features: 4PDT, 3A or DPDT, 5A contacts 4 time ranges Repeat error ±0.2% maximum Control settings by hand or screwdriver Power ON and timing out LED indicators Uses the same
More informationDATA SHEET THYRISTOR SURGE SUPPRESSORS MODEMS/LINE CARD PXXXXLX series
Product specification December 18, 218 V. DATA SHEET MODEMS/INE CARD series RoHS compliant & Halogen free 2 Thyristor Surge Suppressors (TSS) Data Sheet Description DO-15/DO-21 Thyristor solid state protection
More informationVisualize the actual worksite status! Simple and Intelligent I/O Slave Units.
Digital I/O Slave Units with Screw Terminal Blocks (2-tier Terminal Block/Relay Output/SSR Output) CRT1-@D(-1)/@D(-1)/ROS@/ROF@ Visualize the actual worksite status! Simple and Intelligent I/O Slave Units.
More informationThe Complete System Solution!
dvantages of the Class 6 Solid State Relay The Complete System Solution! Optional Heat Sink (SSR-HS-1) Section 3 p. Optional Thermal Pad (SSR-TP-1) Section 3 p.21 We at Magnecraft strive to be your one-stop-shop
More informationInput/output relays for interface between the CPU and the load
Input/output relays for interface between the CPU and the load -RELAYS RoHS compliant FEATURES. Input and output s for interfacing between CPU and external input devices or loads : AC input (yellow) :
More informationPS2601 AC Power Switch
AC Power Switch Parameter Rating Units AC Operating Voltage 26 V rms Load Current 1 A rms On-State Voltage Drop (I L =1A rms 1.2 V rms Features Load Current up to 1A rms (3A rms with heat sink Blocking
More informationFEATURES DESCRIPTION SPECIFICATIONS
KNC-PLC-KS105 - Series FEATURES Four High-Speed Counters, Max 200 khz Four High-Speed Outputs, Max 200 khz 24VDC Power Required 8 Digital Inputs, 8 Digital Outputs 3 Year Lithium Battery for Data Retention
More informationSolid State Relays and Solid State Contactors
and Contactors - General Description Series SR7-SH Panel Mount (to 40A) Technical Information Series SR7-A DIN-rail Mounted Contactors (to 50A) Technical Information Series SAS(R) Panel Mount (50 & 75A)
More information1.5 Solid State Relays
Relays.. Solid State Relays Application s Pins Contacts AC ratings DC ratings Socket CSS Series AC Solid state, Instantaneous switching CSS-I A / 0 V S0 AC Solid state synch. to zero crossing CSS-Z A /
More informationProduct Discontinuation Notices. Discontinuation Notice of Compact proximity sensor TL-M series (for china area only)
PRODUCT NEWS Product Discontinuation Notices August 1, 2011 Proximity Sensors No. 2011248E-2 Discontinuation Notice of Compact proximity sensor (for china area only) Product Discontinuation Recommended
More informationDIGITAL INPUT MODULES, MINIATURE 181 DIGITAL I/O MODULE ACCESSORIES
Isolated Digital I/O Modules Dataforth offers a broad line of digital input and output modules and accessories providing safe, reliable interfacing to industrial measurement and control applications. When
More informationInductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
More informationRE7YA12BU time delay relay for star-delta starter s - 24 V AC DC - 2OC
Characteristics time delay relay for star-delta starter - 0.05..1 s - 24 V AC DC - 2OC Main Range of product Product or component type Contacts type and composition Component name Time delay type Time
More informationRM35JA32MR Current control relay 0.15A 15A, 2 C/O
Characteristics Current control relay 0.15A 15A, 2 C/O Main Range of product Product or component type Relay type Relay name Relay monitored parameters Time delay type Switching capacity in VA Measurement
More informationG3NE. Ordering Information. Solid State Relay. Compact, Low-cost, SSR Switching 5to20A J ACCESSORIES (ORDER SEPARATELY) Solid State Relay G3NE
Solid State Relay G3NE Compact, Low-cost, SSR Switching 5to20A D Wide load voltage range: 75 to 264 VAC. D Dedicated, compact aluminum PCB and power elements used. D Built-in varistor effectively absorbs
More informationG3H/G3HD. Model Number Structure. Solid State Relays Model Number Legend
Solid State Relays G@-VD CSM_GH_GHD_DS_E_6_ New Models with International Standards Added to GH Series (-VD in model number). Same Profile as LY and LY Bi-power Relays Certified by UL, CSA, and VDE (models
More informationOTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Main Range of product Product or component type Integrated connection type Mar 31, 2018 Modicon OTB I/O distributed module Discrete
More informationSolid State Power Management
Solid State Power Management Sensitron 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 World Wide Web - www.sensitron.com E-mail - sales@sensitron.com 135-1009
More informationTBU-KE Series - TBU High Speed Protectors
*RoHS COMPLIANT E2550 0072 Features Superior circuit protection Overcurrent and overvoltage protection Blocks surges up to rated limits High speed performance Small SMT package RoHS compliant* Agency recognition:
More informationIntroduction Circuit Protection
Introduction Circuit Protection Weidmuller s DIN-rail mounted circuit breakers are available for use in applications where circuit protection must be able to distinguish between circuit overloads and short
More informationG3FM. Model Number Structure. Ordering Information. Solid State Relays. Model Number Legend. List of Models
Solid State Relays CSM DS_E_5_3 100-μA-max. Leakage Current, No Bleeder Resistor Required Reduces wiring work by 60% when combined with the PFY-08- PU Push-In Plus Socket (according to actual OMRON measurements).
More informationTM5C12D6T6L compact I/O expansion block TM5-24 I/0-12 DI - 6 DO transistor - 4 AI - 2 AO
Characteristics compact I/O expansion block TM5-24 I/0-12 DI - 6 DO transistor - 4 AI - 2 AO Main Range of product Product or component type Complementary Enclosure material Colour Input/Output number
More informationSquare D General Purpose Relays
Square D General Purpose Relays Class 850R miniature control relays 850RS4 standard 850RS24 low level 850RS34 hermetically sealed Catalog 204 Contents Class 850R miniature control relays bbspecifications....................................................
More informationWhat is Solid State Relay?
Solid State Relays Compared to EMR, the Solid State Relay has no moving mechanical parts. It is essentially an electronic device that relies on the electrical and optical properties of semiconductors to
More informationChip Immune Inductive Prox E2EZ
Chip Immune Inductive Prox Sensor Immune to Metal Chip Accumulation, Ideal for Machine Tool Applications Detects work piece properly even when aluminum or iron chips collect on the sensing head during
More informationMetal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping ratio
More informationModel Number Structure
Solid State Relays G3@-VD CSM_G3F_G3FD_DS_E_4_2 International Standards for G3F Series, Same Profile as MY Power Relays Shape-compatible with mechanical relays. Certified by UL, CSA, and VDE (model numbers
More informationZ-LINE Z201 Z-L LINE. AC Current. to DC ma/v isolator/converter CONVERTERS AND INTERFACES. Electric parameters conv verters
CONVERTERS AND INTERFACES AC Current Z-LINE Z201 to DC ma/v isolator/converter Z-L LINE Electric parameters conv verters INPUT:N.1 channel current 0..5 Aac or 0..10 Aac OUTPUT:N.1 channel current 0..20,
More informationRE7RB13MW adjustable off-delay timing relay s V AC DC - 2OC
Characteristics adjustable off-delay timing relay - 0.05..1 s - 240 V AC DC - 2OC Main Range of product Product or component type Contacts type and composition Component name Time delay type Time delay
More informationOTB1S0DM9LP I/O distributed module OTB - Modbus non isolated serial link m
Characteristics I/O distributed module OTB - Modbus non isolated serial link - 0..10 m Product availability : Stock - Normally stocked in distribution facility Price* : 494.00 USD Main Range of product
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More information-- Quick Search -- Features & Benefits: All Categories > Relays > Solid State > Item # 6425AXXSZS-DC3. Plug-In & Power Relays
Home My Account Support Contact Features & Benefits: Plug-In & Power Relays All Categories > Relays > Solid State > Item # 64AXXSZS-DC3 Sockets Accessories Solid State Relays Time Delay & Sensor Relays
More informationTechnical Note. MECHATROLINK-I Distributed I/O Replacement
Technical Note MECHATROLINK-I Distributed I/O Replacement Applicable Product: MECHATROLINK Distributed I/O Yaskawa America, Inc. 2121 Norman Drive South Waukegan, IL 60085 1-800-927-5292 Doc#: TN.MCD.12
More information4. Sensing Distance. 2: 2 mm. 4: 4 mm 8: 8 mm 15: 15 mm 16: 16 mm 20: 20 mm
Inductive Sensor Double Sensing Distance Model Number Legend SALIENT FEATURES IP - 7, Brass Housing Short - Circuit protection Reverse Polarity Protection Shielded and Non - Shielded Prewired and Connector
More informationRM699B miniature relays
Version (V) Contact data Number and type of contacts Contact material Max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Max. breaking capacity
More informationCOIL CHARACTERISTICS (Vdc) SERIES H,HD,HP,HT,HTD,HPT GENERAL CHARACTERISTICS. Date of issue: 06/ Page 2 of 5. B Vdc
ENGINEERING DATA SHEET CONTACTOR AMP BalancedForce Design Hermetically sealed Designed to the performance standards of MILPRF6 PRINCIPLE TECHNICAL CHARACTERISTICS Contacts rated at 8 and 5 Vac, 400 Hz,
More informationPACSystems RX3i and Series IC694MDL916 and IC693MDL916 Output Module, Isolated Relay, N.O., 4 Amp, 16 Point
January 2010 PACSystems RX3i and Series 90-30 IC694MDL916 and IC693MDL916 Output Module, Isolated Relay, N.O., 4 Amp, 16 Point 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 TB IC694MDL916 Q1 Q2 Q3 Q4 Q5 Q6 Q7
More informationRE7YA12BU. Main. Contacts type and composition Component name Time delay type. 24 V AC/DC at 50/60 Hz V AC/DCat 50/60 Hz
Product datasheet Characteristics RE7YA12BU Main Range of product Product or component type Contacts type and composition Component name Time delay type Time delay range Zelio Time Industrial timing relay
More informationSeries AME25-JZ 25 Watt AC-DC / DC-DC Converter
FEATURES: Click on Series name for product info on aimtec.com Series AME-JZ I/O Isolation 000VAC Low Ripple and Noise Operating Temp: -0 C to +70 C Over Voltage Protection Over current Protection Up to
More informationMotor Controllers AC Semiconductor Motor Controller Type RSHR MIDI
otor Controllers AC Semiconductor otor Controller Type RSHR IDI Soft starting and stopping of 3-phase induction squirrel cage motors 2-phase control with integral bypassing of semiconductors Low inrush
More informationRM22LA32MR Level control relay RM22-L V AC/DC - 2 C/O
Product datasheet Characteristics RM22LA32MR Level control relay RM22-L - 24..240 V AC/DC - 2 C/O Main Range of product Product or component type Relay type Relay name Relay monitored parameters Time delay
More informationOTB1S0DM9LP I/O distributed module OTB - Modbus non isolated serial link m
Characteristics I/O distributed module OTB - Modbus non isolated serial link - 0..10 m Complementary Topology Bus length Main Number of devices per segment 0...32 Data format Parity Discrete input voltage
More informationPower Electronics. Semiconductor relay / - contactor
Power Electronics Semiconductor relay / - contactor PH 9260 POWERSWITCH 0247349 Semiconductor relay PH 9260.91 Semiconductor contactor PH 9260.91/000/01 AC semiconductor relay / -contactor According to
More informationABL8BBU24400 battery control module V DC - 24 V - 40 A - for regulated SMPS
Characteristics battery control module - 24..28.8 V DC - 24 V - 40 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Complementary
More informationProduct Manual Dual SSR Relay Board
Product Manual 3053 - Dual SSR Relay Board Phidgets 3053 - Product Manual For Board Revision 0 Phidgets Inc. 2010 Contents 4 Product Features 4 Connections 5 Getting Started 5 Checking the Contents 5 Connecting
More information4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current
Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4
More informationOutput Current Input Current Max. capacitive Load
AB4S/D Series AC/DC Power Module 4W, Industrial & Medical Safety FEATURES Fully encapsulated Plastic Case 3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals -
More informationAZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
More informationZelio Control Measurement Relays Multifunction 3-phase supply control relays RM17T 00
Zelio Control Measurement elays Product description 105667 Product description M17TT, M17TA, M17TU and M17TE multifunction control relays monitor the following on 3-phase supplies: Function performed M17TT
More information12W AC/DC interchangeable Adapter MU012-HA Series
FEATURES Universal input Voltage: 90-264VAC, 50/60Hz DoE Level VI efficiency Over voltage, Over current, Short circuit protection Fully enclosed plastic case AC plug interchangeable Small wall-mounted
More informationLevel gauges Series LS Level indicator, switch and transmitter for liquids
Level gauges Series LS Level indicator, switch and transmitter for liquids Simple construction Resistant under extreme temperature and pressure conditions No risk of leakage Measuring range: from 150 mm
More informationMetal Oxide Varistor (MOV) Data Sheet
Metal Oxide Varistor (MOV) Data Sheet Features Wide operating voltage (V 1mA ) range from 18V to 1800V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
More informationTVZ: THERMO-FUSE VARISTORS
WORLD PRODUCTS INC. ELECTRONIC COMPONENT SOLUTIONS TVZ: THERMO-FUSE VARISTORS Protection Products Catalog 121 122 Protection Products Catalog Table Of Contents Description 123 Features 123 Part Number
More informationOTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Product datasheet Characteristics OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Complementary Concept Port Ethernet Bus length Main Number of devices per segment 0...256 Communication
More informationRE7RM11BU off-delay timing relay with control contact s - 24 V AC DC - 1OC
Characteristics off-delay timing relay with control contact - 0.05..1 s - 24 V AC DC - 1OC Main Range of product Product or component type Component name Time delay type Time delay range [Us] rated supply
More informationOTB1C0DM9LP I/O distributed module OTB - CANopen bus m
Characteristics I/O distributed module OTB - CANopen bus - 0..1000 m Main Range of product Product or component type Integrated connection type Bus type Jan 28, 2018 Modicon OTB I/O distributed module
More informationcelduc r e l a i s Proud to serve you IGBT BASED DC SOLID STATE RELAY celduc SDI VDC 750VDC 50ADC Page 1/11 GB
SUPPLY STATUS FAULT Vclamp Page 1/11 GB IGBT BASED DC SOLID STATE RELAY SDI0501700 Latest IGBT technology generation. Ultra low drop out voltage at on-state (low power losses). Built-in protection against
More informationMetal Oxide Varistors (MOV) Data Sheet
Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V 1mA ) range from 18V to 820V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
More informationContact protection relay
Contact protection relay Ordering details SVR 450 08 F0000 The protects sensitive control contacts from excessive load. It can be used with latching function or without. Bounce time of control contacts
More information5W AC/DC interchangeable Adapter MU005-HA Series
FEATURES Universal input Voltage: 90-264VAC, 50/60Hz DoE Level VI efficiency Over voltage, Over current, Short circuit protection Fully enclosed plastic case AC plug interchangeable Small wall-mounted
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules 39 SERIES Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention
More informationNO: PH-185 PRODUCT: E3JK Photoelectric Sensors DATE: May 2014 TYPE: Discontinuation Notice
NO: PH-185 PRODUCT: E3JK Photoelectric Sensors DATE: May 2014 TYPE: Discontinuation Notice E3JK Universal AC/DC Supply Voltage Photoelectric Sensors to be Discontinued February 2015; Replace with E3JM
More information