Series PC 3.5 precision subminiature connectors

Size: px

Start display at page:

Download "Series PC 3.5 precision subminiature connectors"

Lester Watson
6 years ago
Views:

1 Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable for use with semi-rigid cables and microwave components. They are intermateable with SMA and SK (2.92 mm) connectors. Due to an air dielectric interface and the more durable construction a superior repeatability further enhances the performance. Description 171 Interface dimensions in mm / inches 171 Technical data 172 Cable connectors 173 Flange mount connectors 175 Transition pins 176 Interface dimensions (mm/inches) Plug (male) Plug Jack min. max. min. max. A 4.55/ / / /0.182 B 0.00/ / / /0.003 C 2.03/ / / /0.125 D 3.49/ / / /0.138 E 2.36/ / / /0.078 F 1.51/ / / /0.060 G 0.38/ / / /0.182 H 0.92/ / / /0.045 I 5.30/ /0.213 K 5.54/0.218 Jack (female) Interface dimensions conformable to the standards: International: IEC

2 Series PC 3.5 technical data Electrical data Impedance Frequency range Dielectric withstanding voltage (at sea level) RG 405/U RG 402/U Working voltage (at sea level) RG 405/U RG 402/U Insulation resistance Contact resistance Centre contact Outer contact RF-leakage VSWR (typical values) RG 405/U RG 402/U Adaptors Requirements 50 Ω DC to 26.5 GHz 750 V rms, 50 Hz 1000 V rms, 50 Hz 250 V rms, 50 Hz 335 V rms, 50 Hz MΩ 3 mω 2 mω 100 db f (GHz) db 1.13 up to 26.5 GHz 1.10 up to 26.5 GHz 1.08 up to 18 GHz / 1.15 up to 26.5 GHz Mechanical data Requirements Coupling nut torque Recommended Proof torque Nm / in. lbs 1.70 Nm / 15.0 in. lbs Coupling nut retention force 270 N / 60.7 lbs Contact captivation 27 N / 6.1 lbs Cable retention force 1) see pages Durability (matings) 500 1) Value considers maximum load of the cables without irreversible variations of specifications. Environmental data Test conditions Temperature range 65 to +90 C / 85 to +194 F Thermal shock MIL-STD-202, method 107, condition B Moisture resistance MIL-STD-202, method 106 Corrosion saltspray test acc. to MIL-STD-202, method 101, condition B Vibration MIL-STD-202, method 204, condition D Shock MIL-STD-202, method 213, condition I Material data Connector part Material Plating Bodies stainless steel passivated Cable entries brass gold Centre contacts copper-beryllium alloy gold Support beads polystyrene, crosslinked Gaskets silicone rubber Some connectors may have a specification that differs from the above mentioned data. The products are designed and guaranteed to pass the above mentioned test procedures. Any additional or different requirement arising from specific applications or environmental conditions which is not covered by these test procedures is subject to request. 172

Series PC 3.5 cable connectors Straight cable plugs (male) For semi-rigid cables Cable entry soldered Centre contact plugged-in Fig. 1 Fig. 2 Fig. 3 HUBER+SUHNER type Item no.

3 Series PC 3.5 cable connectors Straight cable plugs (male) For semi-rigid cables Cable entry soldered Centre contact plugged-in Fig. 1 Fig. 2 Fig. 3 HUBER+SUHNER type Item no. Cable group (example) Packaging Assembly instruction Fig. 11_PC /199_UE Y3, Y16 (EZ_86) single _PC /199_UE Y5, Y12 (EZ_141) _PC /199_UE Y11 (MF_86) Straight cable jacks (female) For semi-rigid cables Cable entry soldered Centre contact plugged-in Fig. 1 Fig. 2 Fig. 3 HUBER+SUHNER type Item no. Cable group (example) Packaging Assembly instruction Fig. 21_PC /199_UE Y3, Y16 (EZ_86) single _PC /199_UE Y5, Y12 (EZ_141) _PC /199_UE Y11 (MF_86)

Series PC 3.5 cable connectors Straight bulkhead cable jacks (female) For semi-rigid cables Bulkhead mounted Cable entry soldered Centre contact plugged-in With panel seal Fig. 1 Fig.

4 Series PC 3.5 cable connectors Straight bulkhead cable jacks (female) For semi-rigid cables Bulkhead mounted Cable entry soldered Centre contact plugged-in With panel seal Fig. 1 Fig. 2 HUBER+SUHNER type Item no. Cable group (example) Packaging Assembly instruction Mounting hole 24_PC /19-_UE Y3, Y16 (EZ_86) single ML _PC /199_UE Y11 (MF_86) _PC /199_UE Y5, Y12 (EZ_141) Fig. 174

5 Series PC 3.5 flange mount connectors Flange mount, jacks (female) Panel mounted ACCEPTSØ0.92 (.036 DIA) CONTACT ACCEPTSØ0.92 (.036DIA)CONTACT Fig. 1 Fig. 2 HUBER+SUHNER type Item no. Packaging Flange type Fig. 23_PC /199_UE single square 1 23_PC /199_UE Panel mounted ACCEPTSØ0.92 (.036DIA)CONTACT HUBER+SUHNER type Item no. Packaging Flange type 23_PC /199_UE single 2-hole 175

6 Series PC 3.5 transition pins Transition pins for PC 3.5 connectors with interchangeable contact pins Pin contact HUBER+SUHNER type Item no. Packaging Plating 73_Z pins gold Tab contact HUBER+SUHNER type Item no. Packaging Plating 73_Z pins gold Tab contact HUBER+SUHNER type Item no. Packaging Plating 73_Z pins gold 176

SERIES MCX 50 MICRO MINIATURE CONNECTORS

SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications