CS3 ULTRA COMPACT EXTREMELY RUGGED JOYSTICK CONTROLLER
|
|
- April Lilian Stewart
- 6 years ago
- Views:
Transcription
1 S3 ULT OMPT ETEMELY UGGE JOYSTIK ONTOLLE S3 S3H S3/ Hall-effect joystick Heavy duty Hall-effect joystick ang / bang onstruction: The S3 is an extremely rugged Joystick in an ultra-compact and versatile design. The durable housing and center pivot design make this device resistant to abuse and ideally suited for high duty cycle applications. 1, 2 and 3 axis control is available as well as a variety of standard and custom handles and grips with push-buttons and levers. oth separate and simultaneous operation of each axis is achieved with standard gate patterns. pplication: For use on industrial vehicles, both off and on highway including excavators, fork-lifts, bucket trucks, truck mounted cranes, construction, agricultural, mining, forestry, airport ground support equipment, scissor lifts, boom lifts and aerial work platforms. Features: ompact and rugged construction design Proprietary blend, ultra-tough boot Environmentally sealed mounting and corrosion resistant components Smooth high-life non-biasing compression style spring return Single and dual axis operation Long life Hall-effect technology Hall-effect meets or exceeds E EM requirements onformal coated electronics to resist moisture Options: rop-in or panel mount options Variety of handle options including sealed push-button and lever actuated deadman ross gate 7-30 V Supply edundant output Nopen, J1939 or basic N protocols ang / bang design 2 or 4 11 micro-switches per axis H design obust internal mechanism including 10mm diameter operating shaft, heavy duty shaft retainer and heavy duty anti-rotation pin S3 with H Handle and Hall-effect sensors. Pub. # 69.1 Stratford, T JM 112
2 S3 OEING INFOMTION rive rrangement: asic ssembly: H ssembly: Handle: Handle ction: Output: Optional: Immunity: Single axis and double axis 2.4 [61mm] shaft length x 0.32 [8mm] shaft diameter and boot supplied standard 2.4 [61mm] shaft length x 0.40 [10mm] shaft diameter and boot supplied standard 1.25 [32mm] dia. ound ball Spring eturn Proportional Hall-effect ang / bang Hall-effect meets or exceeds E EM requirements S3 Technical ata Mechanical: Mechanical Life: 20 million cycles Handle eflection: ±20 degrees Gear atio: irect drive Mounting Footprint: Standard Panel Mounting: 3.5 [90mm] x 3.5 [90mm] Optional rop-in Mounting: 2.7 [69mm] x 2.7 [69mm] Environmental: Operating Temperature: -25 to +70 Storage temperature: -40 to +70 egree of protection above panel: IP54 EM Emissions: omplies with EN :2007 lass Group 1, MHz EM Immunity: omplies with or exceeds EN :2005 expanded to include: FI Immunity of MHz ES Immunity of 15 Kv air, 8 Kv contact Electrical: Hall-Effect: Supply Voltage: 4.5 to 5.5V Output Voltage: atiometric V 5.0V supply Output urrent: 10 m Power onsumption: 20 full load onnections: 1 xis: 20 WG, UL1430 wire with MP Mate-N-Lock connector ( ), 4 lead length 2 xis: 20 WG, UL1430 wire with Molex mini-fit connector ( ), 14 lead length Options: Handle: See S3 Mtg imensions & Handle Options Gates: ross gate Hall-Effect: Option 1: Supply Voltage: 7 to 30V Output Voltage: V 0.15V Option 2: Supply Voltage: 4.5 to 5.5V Output Voltage: edundant - atiometric V 0.15V 5.0V supply N bus: Nopen or J1939 protocols 4 nalog inputs, 8 digital inputs, 2 digital outputs onnections: See ESS408 N based interface module board literature. Pushbutton: Sealed pushbutton, momentary, 1 N.O., 24V ang / bang: ontacts: , 250V form V series snapaction switch with.187 quick connect tab (4 max. per axis) Please consult factory for other available options. Pub. # 69.2 Stratford, T JM 413
3 S3 & S3H HLL-EFFET IMENSIONS FG6 HNLE IGHT 6.6 [169] 7.3 [187] 2.7* FG6L HNLE LEFT OUN LL HNLE H HNLE 2.4 [61] 2 20 M 1.25 [ 32] 4.8 [123] 5.5 [140] 6.6 [169] 7.3 [187] 2.3 [59] 2.6* [66] 2.7* 1.7 [44] 2.7* 2.7 SQ 1.4 [35] 1.0 [27] 1.0 [27] 1.4 [35] 1.0 [27] 1.4 [35] 1.4 [35] 3.5 [90] 1.0 [27] TH20 HNLE WITH ESS408 N INTEFE MOULE O TWIST ± [76] *NOTE: If your controller configuration includes a wired handle option add 1" [25.4mm] to the depth to insure the wire service loop has panel clearance at base of shaft and that the wire service loop can operate unobstructed in all directions. ONTOLS, IN. Pub. # [34] 3.4 [86] Stratford, T [75] 113
4 S3/ IMENSIONS S3 NG / NG PNEL MOUNTING NGEMENT S3 NG / NG OP-IN MOUNTING S3E Single axis (E) S3V ual axis (V) [90] 2.4 [61] 2.3 [58] 2.9 [74] 2.1* [54] 2.2* [56] 1.6* [40] *NOTE: If your controller configuration includes a wired handle option add 1" [25.4mm] to the depth to insure the wire service loop has panel clearance at base of shaft and that the wire service loop can operate unobstructed in all directions. ONTOLS, IN. Stratford, T Pub. #
5 S3 & S3H MOUNTING IMENSIONS N HNLE OPTIONS MOUNTING STYLE 1: PNEL MOUNTING [50.0] [ 54.0] MOUNTING STYLE 2: OP-IN MOUNTING [75.0] [ 80.8] MOUNTING STYLE 3: PNEL MOUNTING [75.0] [ 60] standard Ø2.677 [Ø68.0] for FG6 handle 4 Ø.170 [Ø4.3] 4 Ø.219 [ 5.6] MG27 HNLE 4 Ø.219 [ 5.6] FG5 HNLE HS HNLE WITH ESS408 N INTEFE MOULE O 3.9 [98] 8.8 [224] 8.1 [207] control panel 4.7 [119] control panel 2.6 [66] see note 2 control panel 2.0 see note see note [81] 3.4 [87] 3.0 [75] MOUNTING STYLE STYLE 1: standard 5 hole panel mounting with 2.125Ø [54.0Ø] center hole STYLE 2: 5 hole mounting with 3.180Ø [80.8Ø] center hole for drop-in monting STYLE 3: 5 hole mounting with 2.362Ø [60.0Ø] center hole for panel monting all Ø1.25 [32] HNLE OPTIONS TH20 MG27 MG27V S3 & S3H H HS HN 1.8[46] ase Ø HN 2.25[57] ase Ø MG13 S3H ONLY FG6L FG6 FG Ø See [68.0Ø] note 1. NOTES: 1. ESS408 N interface module board must be remote mounted when used with FG5 handle. 2. If your controller configuration includes a wired handle option add 1" [25.4mm] to the depth to insure the wire service loop has panel clearance at base of shaft and that the wire service loop can operate unobstructed in all directions. 3. onsult factory for other handle options. ONTOLS, IN. Stratford, T Pub. #
6 S3/ IMENSIONS WITH OULE SWITHES S3 NG / NG WITH OULE MIO-SWITHES PNEL MOUNTING NGEMENT S3 NG / NG WITH OULE MIO-SWITHES OP-IN MOUNTING S3E Single axis (E) S3V ual axis (V) [90] 2.4 [61] 2.3 [58] 2.9 [74] 2.5* [65] 2.6* [67] 2.7 ONTOLS, IN. 2.7 *NOTE: If your controller configuration includes a wired handle option add 1" [25.4mm] to the depth to insure the wire service loop has panel clearance at base of shaft and that the wire service loop can operate unobstructed in all directions. Stratford, T Pub. #
PRO-6 HEAVY-DUTY SINGLE AXIS JOYSTICK CONTROLLER
PO-6 HEAVY-DUTY SINGLE AXIS JOYSTICK CONTOLLE PO-6 Single Axis Heavy-Duty Joystick PO-6H Single Axis Heavy-Duty Hall-effect Joystick Construction: The ultra-rugged PO-6 provides precise proportional control
More informationVCSO COMPACT / RUGGED JOYSTICK CONTROLLER
VCSO COMPACT / UGGED JOYSTICK CONTOLLE Construction: The TYPE VCSO Joystick Controller is rugged, compact and offers excellent application versatility. VCSO Joysticks are utilized where precise proportional
More informationVNSO MILL DUTY JOYSTICK CONTROLLER
VNSO MILL DUTY JOYSTICK CONTROLLER Application: The type VNSO Joystick controllers are characterized by their unmatched versatility and rugged construction. They are actively providing directional and
More informationData Sheet. JS6000 Joystick Base
Data Sheet JS6000 Joystick Base Mobile Machine Management The JS6000 joystick base is an element of the flexible, powerful, expandable, and affordable joystick family of mobile machine management products.
More informationPenny & Giles Technical Information JC8000
Penny & Giles Technical Information JC8000 Extremely robust design for arduous applications Center detent for enhanced return-to-center performance Under panel depth has been minimized to 78mm Pivot-point
More informationHG series Hand grip Hall effect joysticks
Distinctive features and specifications Rugged, hand operation Hall effect sensing Sealed up to IP68 1 million life cycles Redundant outputs available Analog, USB and custom outputs CANbus J1939 and CANopen
More informationMS series Mid-size Hall effect joysticks
Distinctive features and specifications Compact size 1, 2 and 3 axis configurations Sealed up to IP68 Available with USB Redundant outputs available 1 million life cycles Available with J1939 CANbus and
More informationHG series Hand grip Hall effect joysticks
Distinctive features and specifications Rugged, hand operation Hall effect sensing Sealed up to IP68 1 million life cycles Redundant outputs available Analog, USB and custom outputs CANbus J1939 and CANopen
More informationData Sheet for Joysticks
Finger Joystick Series 87 Dual redundant outputs IP67 sealed lever heights: 8mm and 60mm 5 lever colors Series 87 is offering paddle joysticks of high precision and quality - claims that are not only supported
More informationFG series FIXED GRIP hand controllers
an APEM Group Company FG series The FG Series of FIXED GRIP hand controllers provide rugged, yet ergonomic operation for the most demanding applications. Custom configured to order, the FG Series may be
More informationRT02 Series Robust Industrial Joystick. RunnTech
Electronics (Changzhou) Corp. RT0 Series Robust Industrial Joystick RT0 Series Robust Industrial Joystick Product Features Potentiometer sensor or Hall sensor; Single axis, dual axis or axis control; Resistant
More informationData Sheet for Joysticks
Series TRY or axes Life expectancy of Million cycles Sealed up to IP68 Multifunction handle for additional functions, e.g. Switches, Rockers, Deadman Optional interfaces: USB, CANbus J99 or CANopen The
More informationWM-580. Electronic CANbus Joystick. Market Specification
Electronic CANbus Joystick Market Specification Product Description The joystick is a reliable, ergonomic and configurable control solution. We leveraged our experience in the controls industry, considered
More informationFingertip Joystick. Single-axis joystick for easy and ergonomic actuation. Use. Variants
Fingertip Joystick Single-axis joystick for easy and ergonomic actuation JFT + Compact design for simple "on top" installation in control panels + Parallel arrangement in the tightest installation spaces
More informationCJ series Ergonomic multifunction joysticks
an APEM Group Company CJ series The CJ Series joystick features an ergonomic multifunction handle purposely designed for safety critical hand-operated applications. Available as a one or two axes joystick,
More informationData Sheet for Joysticks
Different handle designs available Optionally with Pushbuttons and Deadman Industrial-suited robust design IP classes up to 68 (on request) Several Output Options (analog, CAN J1939, CANopen, USB) The
More informationData Sheet for Joysticks
Series TRY or axes Life expectancy of Millionen cycles Sealed up to IP68 Multifunction handle for additional functions, e.g. Switches, Rockers, Deadman also available with USB- or CANbus-Interface The
More informationRT300 Series Crane & Hoist Joystick. RunnTech. Potentiometer: ±32, Hall sensor: ±20
Electronics (Changzhou) Corp. RT00 Series Crane & Hoist Joystick RT00 Series Crane & Hoist Joystick Product Features Single axis or dual axis control; Pure silver contacts to ensure durable; Spring return
More informationIH Series HALL EFFECT SWITCHES. Benefits - switch and linear versions - High number of cycles - low behind-panel depth - IP67 sealing
HALL EFFECT SWITCHES Benefits - switch and linear versions - High number of cycles - low behind-panel depth - IP67 sealing Contents IHS Hall effect Switches 3 IHL Hall effect Linear 6 1 HALL EFFECT SWITCHES
More informationSENSORS INCLINOMETERS... SN4 LENGTH AND ANGLE SENSORS... SN6 SLIP-IN SPOOL POSITION TRANSDUCER... SN8 PROXIMITY SENSOR... SN10 MATERIAL SENSOR...
Section / Description page INCLINOMETERS... SN4 LENGTH AND ANGLE SENSORS... SN6 SLIP-IN SPOOL POSITION TRANSDUCER... SN8 PROXIMITY SENSOR... SN10 MATERIAL SENSOR... SN11 ACCESSORIES... SN12 Page SN1 Page
More informationIH Series HALL EFFECT. Benefits - switch and linear version - 5 million cycle - low behind panel depth - IP67 sealing
IH Series HALL EFFECT Benefits - switch and linear version - 5 million cycle - low behind panel depth - IP67 sealing IH series - Hall Effect HALL EFFECT Hall effect = contactless => long life IH Switch:
More informationData Sheet for Joysticks
Different handle designs available Optionally with Pushbuttons and Deadman Industrial-suited robust design IP classes up to 8 (on request) Several Output Options (analog, CAN, USB) The TRY80 series provides
More informationModel 720 Electromechanical Hour Meter
Model 720 Electromechanical Hour Meter A 5 figure (reset) or 6 figure (non-reset), AC hour meter encased in a rugged steel housing and designed to mil-spec environmental requirements. The non-reset models
More informationData Sheet for Joysticks
Finger Joystick Series 8 Dual redundant outputs IP6 sealed lever heights: 8mm and 60mm 5 lever colors Series 8 is offering paddle joysticks of high precision and quality - claims that are not only supported
More informationCJ series Ergonomic multifunction joysticks
The CJ series joystick features an ergonomic multifunction handle purposely designed for safety critical hand-operated applications. Available as a one or two axes joystick, the CJ series utilizes non-contacting
More informationData Sheet for Joysticks
Up to two pushbuttons in handle Protection Grade up to IP68 Optionally available with USB and CAN (J99) The TRY50 series covers the transition from finger- to handsize joysticks. This has been realized
More information3000 series Premium Hall effect joysticks
Distinctive features and specifications Class leading installed depth
More informationJS2000 Joystick. Technical Information. Reverse. Right. Left. Forward
Technical Information Reverse Right Left Forward Revision history Revision date Page Change Remarks 03/24/2005 Initial release 2005 Sauer-Danfoss. All rights reserved. Printed in U.S.A. Sauer-Danfoss accepts
More informationMulti-axial miniature joystick based on Hall Effect technology
Joystick with grip Multi-axial miniature joystick based on Hall Effect technology J... + space-saving design + highly reliable and long lifetime due to contactless Hall Effect technology + integrated third
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More informationNOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
More informationMDSM is the commercial industry s
MSM is the commercial industry s smallest -type connector for shielded I/O wire-to-board applications. Requiring less than 1/3 the area of a traditional Subminiature connector, MSM is designed for situations
More informationTS series Proportional Hall effect thumbsticks
Distinctive features and specifications 1 or 2 axis Pushbutton handle option Non-contact Hall effect technology Submersible to 1m (3.28ft) per IP68 Threaded metal housing option Redundant outputs available
More informationBF series Paddle controllers
A BF series The BF Series Paddle is the very latest generation in high precision contactless controls. It combines the features of a contactless single axis joystick and a switch in one control. Long trouble-free
More informationHF series Hall effect joysticks
The HF joystick is a contactless, multi-axis controller providing long life finger positioning control. Featuring non-contact Hall effect technology while utilizing minimal mounting depth, the HF joystick
More informationCROWN CLIP Series Sockets
OWN LIP Series Sockets Product Facts ompact design High performance OWN BND contacts urrents to 350 mps 1 Mates with solid or laminated blades Supports true hot-plug (current interruption)2 Float-mount
More informationS HORT FORM. Catalog
S HORT FORM Catalog Grips and Joysticks The OTTO Controls product line includes Pushbutton, Rocker, Toggle, Limit, Rotary, Pendant, Basic and Special Purpose switches, Control Grips, Hall Effect switches
More informationMODEL 212 Rev: B Date: 10/19/2007
Doc. No: M504_212Connection.doc MODEL 212 Rev: B Date: 10/19/2007 VALVE DRIVE BOARD CONNECTIONS Originator: DAB Page: 1 of 1 CONNECTING MULTI-AXIS HALL EFFECT JOYSTICKS TO PQ VALVE DRIVE BOARDS (Example
More informationChapter. Specifications - Terminal Bases and Power Supplies. In This Chapter:
Specifications - hapter Terminal ases and Power Supplies In This hapter: TK-0(-) I/O Terminal ase... TK-(-) I/O Terminal ase... TK-0, TK-0 Power Supply... alculating the Power udget... Managing the Power
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
More informationHT series Ruggedized Hall effect joysticks
Distinctive features and specifications Rugged finger positioning control Available with CANbus J1939 Available with USB 1.1 HID compliant interface 1, 2 and 3 axis configurations 1 million life cycles
More informationJoystick base J2... Multi-axis, small version. Use. Options. + space-saving design
Joystick base Multi-axis, small version J2... + space-saving design + highly reliable and long lifetime thanks to contactless Hall Effect and reed technology + analog output signal (current/voltage, also
More information3000 series Premium Hall effect joysticks
The 3000 Series is the very latest generation in high precision contactless joysticks. With a class leading installed depth of
More informationHall-Effect Paddle Joystick
Hall-Effect Paddle Joystick Robust design for arduous applications Return-to-center or return-to-end options Under-panel depth minimized to 9mm Rated for 5 million cycles Hall-effect sensor technology
More informationABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
More informationData Sheet for Joysticks
Shallow installation depth < 26 mm Service-friendly due to connectors Available interfaces include USB, Dual Output and Voltage Regulator Ideally suited for applications in CCTV, robotics, medical technology
More informationZ1 axis pot. (Rocker pot.) side operation. SW1 (ON when pushed)
Single, Dual, Triple or Quad Axis Position Hold or Spring Return Multiple Pushbutton Options Center and/or Directional Micro-Switches Center and/or Positional Detents 5 Mio. Operations Mechanical Life
More informationHG series Hand grip Hall effect joysticks
The HG Series joystick is a rugged Hall effect controller designed for use in high operating force, hand-operated applications requiring reliable positioning control. Available with several high-function
More informationHB5M. Hollow Bore Optical Encoder Page 1 of 5. Description. Mechanical Drawing. Features
Description HB5M Page 1 of 5 The HB5M is a hollow bore (hollow shaft / thru-bore) optical encoder with a machined aluminum enclosure and an anodized protective finish. The HB5M optical incremental encoder
More information80 Series Push Button Pendant Features
80 Series Push utton Pendant Features he Conductix-Wampfler 80 Series Push utton Pendants are available with a wide variety of switch types, options, and accessories for easy customization. You can get
More informationMINIATURE Z-AXIS HALL EFFECT JOYSTICK
MINIATURE Z-AIS HALL EFFECT With Pushbuttons Z-Axis Without Pushbuttons The Z-Axis Miniature Series Hall Effect Joystick allows for a 6 rotational movement of the knob at the top of the joystick. Z-Axis
More informationAmphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
More informationROMEO. Joystick. OptiOns. FEatuREs. CERtiFiCatiOns
Joystick ROMEO Sturdy and reliable joystick for harsh environments and situations. Materials, technical solutions and sizing of critical components studied to guarantee mechanical resistance and long life,
More informationTECHNICAL DATASHEET Heavy Duty - Absolute Encoder AR 62/63
AR 6 Single and Multi turn: Resolution up to 8 Bit Wearless electronic multi turn: contact -and battery less, self-energetic 300 N axial and radial load 00 g shock resistance/ 0 g vibration resistance
More informationJC6000 MULTI AXIS JOYSTICK CONTROLLER
JC6000 MULTI AXIS JOYSTICK CONTROLLER Innovation In Motion INNOVATION IN MOTION The new JC6000 rugged joystick controller is designed for demanding operator control applications in off-highway vehicles
More informationHFX series I First generation Hall effect joysticks
an APEM Group Company HFX series I The HFX Series I Joystick is designed for precision finger operated applications requiring proportional control and long trouble-free life. Featuring non-contacting Hall
More informationPowerful and robust. LED Workla
Powerful and robust LED Workla mps NORDIC LIGHTS produce premium, high-tech work and driving lights for heavy-duty vehicles in the mining, construction, forestry, material handling and agricultural industries.
More information80 Series Push Button Pendant Features
80 Series Push utton Pendant Features he Conductix-Wampfler 80 Series Push utton Pendants are available with a wide variety of switch types, options, and accessories for easy customization. You can get
More informationInstruction book IQAN-LSL. Publ no HY /UK Edition 0301
Instruction book IQAN-LSL Publ no HY17-8367/UK Edition 0301 Contents 1 Introduction......................................................2 2 Precautions.......................................................3
More informationTS series Proportional Hall effect thumbsticks
The TS Series Thumbstick is a proportional two axes joystick in a miniature package. Featuring non-contacting Hall effect technology for long life performance, the TS Series Thumbstick is available with
More informationTH series Single-axis throttle joysticks
The TH Single Axis Throttle is a heavy duty friction clutch joystick delivering proportional control. Designed for prolonged use and durable enough to withstand rough operation, commonly used applications
More informationSingle Leaf Measurement Transducers
Single Leaf Measurement Transducers A new range of Flexure Measurement Sensors Sensors to measure hard to reach areas such as bores and gaps Excellent resolution and repeatability Robust designs, good
More informationAmphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
More informationHB5M. Hollow Bore Optical Encoder Page 1 of 6. Description. Related Products & Accessories. Features
Description HB5M Page 1 of 6 The HB5M is a hollow bore (hollow shaft / thru-bore) optical encoder with a machined aluminum enclosure and a clear anodized protective finish. The HB5M optical incremental
More informationELECTRIC ON-OFF JOYSTICK SERIES JEO
1 Index of content: Page Description: 3 Technical data: 4 Dimensional data: 5-6-7 Kinematic mechanism configuration: 8 Electric circuit configuration: 9-10 Protection boots: 11 Ordering key: 12 2 Descripton:
More informationPile Driver Weld Immune Sensors
DC... 190 8, 12, 18, and 30 mm Diameter... 190 3- and 4-Wire DC... 192 8, 12, 18, and 30 mm Diameter... 192 AC/DC... 194 12, 18, and 30 mm Diameter... 194 Pile Driver Sensors P+F s weld immune Pile Driver
More informationAnalog micro push button
Analog micro push button for rugged applications 145MA... + 0.5...4.5 V DC analog output at 5 ± 0.5 V DC operating voltage + output signal can be adjusted within the voltage range + non-contact operation
More informationAG series Agricultural grips
an APEM Group Company AG series The new AG Series Handle provides an innovative approach for machine control of off-highway equipment and agricultural applications. Professionally designed for optimal
More information9000 SERIES - CONTACTLESS JOYSTICKS ULTRA LOW PROFILE ONE, TWO, THREE AXIS WIDE VARIETY OF HANDLES
30.46 R 3. 0 0 2.10 O 20.99 O 26.20 O 27.31 O 29.43 APEM 9000 SERIES - CONTACTLESS JOYSTICKS ULTRA LOW PROFILE ONE, TWO, THREE AXIS WIDE VARIETY OF HANDLES HIGH EMC IMMUNITY 18 MONTH WARRANTY INFINITE
More information900MB Series. Analog Output Module. Four Analog Outputs. DC Current or DC Voltage. Description
900M Series Modbus/ nalog Output Module Outputs (2) Four nalog Outputs urrent or Voltage Isolation Four iscrete Outputs Outputs (4) Modbus Outputs (2) 10-36V or 24V Power 917/918M Multi-hannel nalog Output
More information9000 SERIES - CONTACTLESS JOYSTICKS ULTRA LOW PROFILE ONE, TWO, THREE AXIS WIDE VARIETY OF HANDLES
30.46 R 3. 0 0 2.10 O 20.99 O 26.20 O 27.31 O 29.43 APEM 9000 SERIES - CONTACTLESS JOYSTICKS ULTRA LOW PROFILE ONE, TWO, THREE AXIS WIDE VARIETY OF HANDLES HIGH EMC IMMUNITY 18 MONTH WARRANTY INFINITE
More informationSpecifications. Safety Ratings. Standards. Safety Classification. Certifications. Outputs. Safety Contacts
Interlock Hinge Sprite General 1-2-Opto-electronics 3-Interlock Logic Power The Sprite is a hinge-actuated safety interlock switch in a compact housing only 75 x 25 x 29 mm (2.95 x 0.98 x 1.14 in.) making
More informationMICRO SWITCH Compact Precision Limit Switches. 14CE Series. Datasheet
MICRO SWITCH Compact Precision Limit Switches 14CE Series Datasheet MICRO SWITCH 14CE Series Compact Precision Limit Switches All MICRO SWITCH 14CE Series compact enclosed switches incorporate fluorocarbon
More informationInductive Proximity Sensors E57 Premium+ Series
1 ontents Overview.................... 1 Model Selection, Sensors....... 2 Model Selection, ompatible onnector ables............. 5 Wiring iagrams.............. 6 Specifications................. 7 Model
More informationOption L2S Single axis control / Bidirectional Option L4C Cross axis control / Bidirectional Option L4D Multi axis control / Bidirectional
JOYSTIKS HEVY UTY MULTI-XIS HLL EFFET JOYSTIK (JOYSTIK SE ONLY) FETURES The joystick controller has been designed for use in mobile and industrial field applications. The use of the hall effect sensor,
More informationLift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
More informationFISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
More informationJC6000 MULTI AXIS JOYSTICK CONTROLLER
JC6000 MULTI AXIS JOYSTICK CONTROLLER Innovation In Motion INNOVATION IN MOTION The JC6000 rugged joystick controller is designed for demanding operator control applications in off-highway vehicles and
More informationRotary Measuring Technology Absolute encoders, Multiturn, DeviceNet
High IP High shaft load capacity Shock/vibration resistant Short-circuit proof Reverse polarity protection Compact and Rugged: Minimal installation depth High shock and vibration values Very compact (only
More information德国 RAFI 官网的 JoyScape 进口摇杆控制杆 开关选型说明书 pdf 样本资料 JoyScape The Intelligent Joystick Platform for Control Panels 山东省青岛 RAFI 开关 RAFI 按钮开
JoyScape The Intelligent Joystick Platform for Control Panels Joyscape A Logical Advancement in Man-Machine Communication In agricultural machines as components of ergonomic operating units and control
More informationContact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect
VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant
More informationFUSERBLOC from 30 to 800 A
from 30 to 800 Product presentation FB30DT FB30SO Ferraz Shawmut FUSERBLO disconnect switches are extremely durable, manually operated, fusible disconnect switches. The switches employ double break contacts
More informationWatts. xppower.com. General. Input. Output. Environmental. EMC & Safety. Compact Size. IT & Medical Approvals.
4- Watts ECM Series Compact Size xppower.com IT & Medical Approvals Convection-cooled Class I and II Construction DC Input Version Available (DCM Series) PoE Isolation Version Available (POE Series) 3
More informationXCKN2118G11 limit switch XCKN - thermoplastic roller lever - 1NC+1NO - snap - Pg11
Characteristics limit switch XCKN - thermoplastic roller lever - 1NC+1NO - snap - Pg11 Complementary Tracks Switch actuation Electrical connection Contacts insulation form Positive opening Positive opening
More informationCompact Bellows Pumps
Compact Bellows Pumps Compact Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Compact pumps have been successfully applied in photo, X-ray
More informationAngular Position Technology
Inclinometers WHAT IS AN INCLINOMETER? Inclinometers measure angular tilt in reference to gravity. TURCK inclinometers contain a MEMS (Micro-Electro-Mechanical System) device that incorporates a microelectromechanical
More information0 5 VDC, 10K Pot or 0 20 ma input, remote mount PCB board, 2000mA max. output
Hydraforce Valve Drivers DIN coil or remote mounted in either PCB board only or metal box style. 7114950 0 5 VDC, 10K Pot or 0 20 ma input DIN coil mount, 2000mA max. output $ 540.00 4000161 0 5 VDC, 10K
More informationInstruction book IQAN-LST. Publ no HY /UK Edition 0301
Instruction book IQAN-LST Publ no HY17-8364/UK Edition 0301 Contents 1 Introduction......................................................2 2 Precautions.......................................................3
More informationLimit Switches E47 Precision Switches
June 09 E7 Precision Switches PG.0C.0.T.E 1 E7 Precision The Cost-Effective Solution for Highly Accurate Switching Applications Contents Overview...................... 1 Model Selection, Basic Switches................
More informationErgonomic Handles. CL 3 3 JC600 only EL 3 HB HP Push. A Rocker 3 TR ZAS 3 3 3Rotary ZC 3 3 KW 3 3
Ergonomic This brochure details Penny & Giles current range of ergonomic handles that complement their extensive range of electronic joysticks. It should be read in conjunction with their joystick brochure,
More informationbidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental
and draw-wire sensors Spot-on and trailblazing technology measure rotation speed, sense, position, angle and length. For this purpose, they convert mechanical motion in electrical signals. There are incremental
More informationStandard Bellows Metering Pumps
Standard Bellows Metering Pumps Bellows Metering Pumps operate on a positive displacement principle. Pumps are designed to displace both corrosive and noncorrosive fluids. Accurate to ± 0.5% from stroke
More informationHigh Torque Type Ball Spline
58-1E Models LBS, LBST, LBF, LBR and LBH Seal Spline shaft Spline nut Ball Retainer Snap ring Fig.1 Structure of Model LBS Point of Selection Point of Design Options Precautions on Use Accessories for
More informationHard-wearing and hygiene-compliant Joystick switches RK / NK
Hard-wearing and hygiene-compliant Joystick switches RK / NK RK / NK Hard-wearing and hygiene-compliant Multifunctional: Spring-return joystick switch, reset by spring force Maintained joystick switch,
More information1000 SERIES - MICROSWITCH JOYSTICKS COMPACT SIZE ROBUST CONSTRUCTION SINGLE OR DUAL AXIS VERSATILE SINGLE OR DUAL POLE ALTERNATIVE KNOB SELECTION
5.9 0.28 3.95 APEM 4.75APEM 3.6 18.5 1000 SERIES - MICROSWITCH JOYSTICKS COMPACT SIZE ROBUST CONSTRUCTION SINGLE OR DUAL AXIS VERSATILE SINGLE OR DUAL POLE ALTERNATIVE KNOB SELECTION IP65 ABOVE PANEL BUSH
More informationABSOLUTE ROTARY ENCODER MODBUS/TCP
Main Features - Compact and Heavy-Duty Industrial Model - Communication via Standard Protocols - Integrated Web Server - Interface: Modbus/TCP - Housing: 58 mm - Full shaft: 6 or 10 mm / Hub Shaft 15 mm
More information343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
More informationPush-Pull and E-Stop Switches. Datasheet
Push-Pull and E-Stop Switches Datasheet Honeywell Push-pull and E-stop switches are durable, environmentally sealed, sliding contact switches incorporating two circuits with multiple combinations. The
More informationDATA SHEET ABSOLUTE OPTICAL ROTARY ENCODER ETHERNET POWERLINK
Main Features - Compact Industrial Model - Communication via Ethernet Powerlink V2 - Interface: Ethernet - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm - Max. 65536 Steps per Revolution (16
More informationScrew. Nut Guide. Features
Actuator Controls Rotary Limit Switches SKA Series Rotary Limit Switch Screw Traveling Nuts Input Shaft Nut Guide Gear Precision Available in two control voltage ratings: 250 or 480, and in three gear
More information