AR-321 (H) / AR-331 (H)/ AR-721(H) / AR-725 (H) / AR-757 (H)

Size: px
Start display at page:

Download "AR-321 (H) / AR-331 (H)/ AR-721(H) / AR-725 (H) / AR-757 (H)"

Transcription

1 AR- (H) / AR- (H)/ AR-(H) / AR- (H) / AR- (H) SOYAL ACCESS CONTROL SYSTEM V0 Contents AR- (H):Touch-panel Metal Housing Product User Guide Terminal Cables Tools Water proof Strip d x P P P P AR- (H):Touch-panel Metal Housing / AR- (H-S):Metal Housing Product Optional [Optional] User Guide Must to purchase relay Tools Terminal Cables AR-RB Digital Relay or c x or WG keyboard AR- (H) AR-RB Original Relay AR- (H-S) g x P h x AR- (H) User Guide Product Terminal Cables Tools f x P AR- (H):Illuminated Touch-panel AR- (H-M) Products P User Guide P P Terminal Cables P Tools c x P e x A. B. C. P D. AR- (H) Products User Guide A. E. P Terminal Cables F. P P P P AR- (X) Products Tools f x Tools a x e x b x c x A. A. AR- (H) Product B. C. G. User Guide H. D. Terminal Cables Tools f x P Parts a. Button Head Pozidriv Tapping Screw: Mx0 e. b. Button Head Pozidriv Slotting Screw:.x0 f. Security Torx Screw: M.x c. g. Flat Head Hex Socket Screw: Mx P P P Flat Head Cap Philips Tapping Screw: x. Security Torx Screw: Mx0 P d. h. Flat Head Cap Philips Tapping Screw: x Security Torx Wrenches

2 Access Touch-panel Metal Housing / Illuminated Touch-panel V0 Installation AR- (H) Pull the cables from the square hole of the mounting plate. Use a screwdriver to screw the mounting plate onto the wall. Attach the water proof strip to the body, then connect the terminal cables to the body and attach the body to the mounting plate. Use the Allen key and screws (accessories supplied) to assemble the body onto the mounting plate. Turn on the power, and LED will light and beep will sound. AR- (H) / AR- (H-S) AR- (H) Remove the rubber plug. To cut tamper-resistant column and make it fit the appropriate height for actual installation. First, take off the metal casing then screw the controller on the wall. Second, put the metal casing back and lock it with security screw. Finally, put the rubber plug into the hole. Turn on the power, and LED will light and beep will sound. Pull the cables from the square hole of the mounting plate. Use a screwdriver to screw the base onto the wall. Connect the terminal cables to the body and attach the body to the mounting plate. Assemble the covers with the Allen key and screws (accessories supplied). Turn on the power and LED will light and beep will sound. AR- (H) AR- (H-M) Pull the cables from the square access hole of the mounting plate C. Use a screwdriver to screw the metal plate C onto the wall. c. C. A. B. A. B. C. A. B. D. A. d. C. Take off the plastic mounting plate B from the body A, and pull the cables through the access hole of C and B, then connect to the body A. Assemble plate B with the body A, and embed the water proof strip D onto the plastic side frame. Assemble the body A onto the mounting plate C with the Allen key and screws (accessories supplied). Turn on the power and LED will light and beep will sound. AR- (H) F. A. E. F. Use a screwdriver to screw the base F onto the wall. Attach the water proof gasket to the body A, and pull the cables from the square hole of the base F, and connect to the body A. Assemble the body A with the base F. Screw A and F tight with the Allen key and screws (accessories supplied). e. Turn on the power and LED will light and beep will sound. AR- (X) A. A. b. A. H. A.+A. D. Put on G, and attach A onto the plastic plate A, and screw it with the Allen key and screws (accessories supplied). Put the ring O on the metal frame, and put them together onto the reader A, and screw them and buckle up the buckles on the back. G. e. a. Embed the water proof strip D onto the frame side of the base. Following by the install process of AR- (H-M) AR- (H) Pull the cables from the square hole of the mounting plate. Use a screwdriver to screw the base onto the wall. Embed the water proof strip onto the frame side of the base. Connect the terminal cables to the body and attach the body to the mounting plate. Assemble the covers with the Allen key and screws (accessories supplied). Turn on the power and LED will light and beep will sound.

3 SOYAL AR- (H) / AR- (H)/ AR-(H) / AR- (H) / AR- (H) ACCESS CONTROL SYSTEM V0 tice.tubing: The communication wires and power line should NOT be bound in the same conduit or tubing..wire selection: Use AWG - Shielded Twist Pair to avoid star wiring..power supply: Don t equip controller and lock with the same power supply. The power for controller may be unstable when the lock is activating, that may make the controller malfunction. The standard installation: Door relay and lock use the same power supply, and controller use independent power supply. Connector Table AR-H(H) khz.mhz khz.mhz khz P khz P P P P P P P P P 0 P P AR- (H) / AR- (H-S) AR- (H) AR- (H) P P.MHz P.MHz P P P P P Cable : P Lock Relay Common--Point Door contact Exit Switch Alarm Relay Power Cable : P Wiegand Beeper LED Cable : P Module Color Blue White Purple White White Orange Purple Gray Thick Red Thick Black Color Thin Blue Thin Green k Brown Yellow Color Thick Green Thick Blue Wiegand DAT: Input Wiegand DAT:0 Input Beeper Output V/00mA, Low LED Green Output V/0mA, Max LED Red Output V/0mA, Max RS-() RS-() Cable : P (Contact Rating: A VAC/VDC) Color Tamper Switch Red Orange Yellow Cable : P (Optional) Color -PIN Connector Black White Purple () DCVAmp () DCVAmp () DCVAmp Negative Trigger Input Negative Trigger Input Low output; Max /00mA (Open Collector) DC Power DC Power 0V. Duress Arming/ Security trigger signal After S/N: 00-XXXXXX khz P P P P P AR- (H) P P P P.MHz Connectors Comparison AR- (H) P P P P ( POptional) AR- (H) P P AR- (H) P P P P ( POptional) AR- (H) P P P P ( POptional) AR- (H) P P P P P P P P P P P P Cable : P Door bell Arming Duress LED indicator Cable : P (Directly connected at the Access controller) Power Exit Switch Module Lock Relay Module Tamper Switch Alarm Relay Door contact LED Beeper Wiegand 0 Color Brown White BE Output Red White Yellow White Green White Color Thick Black Thick Red Purple Thick Green White Thick Blue Yellow White Orange White Gray Orange Brown Yellow k Thin Blue Thin Green AR Output/ Security trigger signal Output DU Output/ TTL out Hi input/ Green light brighten DC Power 0V DC Power Negative Trigger Input RS-() Low output; Max /00mA (Open Collector)/ Security trigger signal Output RS-() Low output; Max /00mA (Open Collector) Negative Trigger Input LED Green Negative Output V/0mA, Max LED Red Negative Output V/0mA, Max Beeper Negative Output V/00mA, Low Wiegand DAT: Input Wiegand DAT:0 Input

4 Access Touch-panel Metal Housing / Illuminated Touch-panel V0 Wiring Diagram Connect to Magnet Lock or Electric Bolt or Electric Bolt Magnet Lock DC Connect to Electric Strike Electric Strike DC PB P EXIT P PB EXIT DC Request To Exit DC Request To Exit Connect to Reader Connect to Door Sensor Reader WG WG 0 BZ GLED RLED DC P WG WG 0 BZ GLED RLED P DC Door Contact ALM DC P Alarm Relay Outpot Module Door Contact Strengthen security with AR-RB Connect to AR- (H) DC Electric Bolt P ARM P 0 Lock PB P EXIT PB DC AR-RB DC Request To Exit.Enable the security trigger signal: Please refer to the DDD.Disable the door open button input. (Please refer to the 0 DDD of function default value.) Connect to Access Control for P DC Request To Exit EXIT Electric Bolt Relay Outpot Module If use the AR-RB, please refer to the top of the wiring diagram. Converter de ID 00 AR-E Host CH CH P de ID Connect to arming tools for P AR- (H) Door Contact 0 ALM P DC Door Contact de P P de Alarm de P DC P de Alarm Relay Tamper Relay Tamper Alarm

5 SOYAL AR- (H) / AR- (H)/ AR-(H) / AR- (H) / AR- (H) ACCESS CONTROL SYSTEM V0 Connect AR-Hto Reader for P Reader DC GLED RLED BZ WG WG 0 AR- (H) P 0 Connect to for P DC AR- (H) P 0 Converter Host CH CH AR-E External WG keyboard If you want to program system on AR- (H-S) directly, please order WG keyboard then install it according to the following pattern. Remove the Protection plug that in the bottom right. ( Do not lose protection plug or it will affect the protection level.) WG Keyboard cable will be connected to the pin board. WG Keyboard connected to the controller from the bottom right of the hole. When you finish programming system, please put protection plug back to the controller. AR- (H) Interaction Area (HB):kHz (HD):.MHz CARD CARD (HB) touch card-area for interaction. (HD) touch keyboard area for interaction. Metal controller's Induction scope is smaller than others,and EM: (HB) / MIFARE: (HD) is different. Refer to the picture. Adding and Deleting Tag Mode/Mode Add Single Tag or Random tags Input (or Master Code) UUUUU 0000 Present the tag(s) with (single tag or random numbered cards one by one) Done [e.g.] readom cards with user addresses. 00 and. 0: Access programming mode Present the tags one by one Done Add the Sequential tags Input (or Master Code) UUUUU QQQQQ Present the tags (Present the tag with the lowest number first.) OK [e.g.] User Address NO.0 to NO.0 have 0 pcs of sequential tags:(~): Access programming mode Close Tag into RF Area(only use the tag NO.) OK Delete a Single Tag Input (or Master Code) 0 SSSSS EEEEE [e.g.] Delete User Address: 000 Access programming mode Delete a batch of Tags Tag Information Input (or Master Code) 0 SSSSS EEEEE [e.g.] Delete User Address: 000~00 Access programming mode CARD CODE CARD CODE Delete All Tags Input (or Master Code) SITE CODE SITE CODE Mode At this mode, User Address = Card Code Add Tags Input (or Master Code) SSSSS EEEEE OK [e.g.] Add User Address: 0000~0 Access programming mode OK Delete Tags Input (or Master Code) 0 SSSSS (or )EEEEE OK [e.g.] Delete a tag with card code Access programming mode 0 OK Delete All Tags Input (or Master Code)

6 Access Touch-panel Metal Housing / Illuminated Touch-panel V0 Operation process A. Enter/ Exit Program Mode Enter the program mode Input or PPPPPP [e.g.] The Default Value=, if already changed the Master Code=, input program mode accessed Exit the program mode Master Code modification Input Access programming mode 0 PPPPPPRRRRRR [Input the -digit new master code twice.] [e.g.] Set the Master code to be, input 0 B. Chang the de ID of Access programming mode 00 NNN [de ID: 00~] C.Set up M/M/M Access programming mode 0 N [N=//] D. Set up the password M/M: Individual pass code Card or PIN: Access programming mode UUUUU PPPP [e.g. User address: 0000 and pass code:, input 0000 ] Card and PIN: Access programming mode UUUUU PPPP [e.g. User address: 0000 and pass code:, input 0000 ] M: Public pass word Card or PIN: Access programming mode PPPP [Input -digit pass code, default value: ] Card and PIN: Access programming mode PPPP [Input -digit pass code, default value: ; PPPP=0000: change into Card Only] E. Dual Door Control(M/M) with an reader to do the "Dual Door Control". Access programming mode 0 [0= Dual Door Control] F. Anti-pass-back(M/M) Usually, anti-pass-back is commonly applied to parking areas in order to prevent from multi-entry with one card at a time, or to situations need access and exit monitor. Enable controller Access programming mode 0 DDD [= Anti-pass-back(0=Disable; =Enable)/ 0=Access/Exit(0=Exit; =Access).] [e.g.] Enable Anti-pass-back, and set to Exit door= ( x ) + (0 x 0) = Access programming mode 0 (Please refer to function default value for details.) Enable card Access programming mode SSSSS EEEEE N [SSSSS= User address start; EEEEE= User address end; N=0(control)/ (t control)/ (reset)] [e.g.] User address from 00 to 00 enable the anti-pass-back function: [e.g.]. enable the anti-pass-back, and induction into the door has not been induced to leave. When he represent into the door will become invalid, then he needs to set the reset. Access programming mode Reset G. Auto Open Time Zone Door will keep open after the first flashing card.there are time zones supported when Stand-Alone, and time zones when it connect to AR-E. Enable/Disable auto open zone Access programming mode 0 00 [00= enable Auto-Open Time Zone; 000= disable Auto-Open Time Zone] Enable/Disable auto open door without presenting card Access programming mode 00 [00= enable Auto-Open Time Zone; 000= disable Auto-Open Time Zone] Set up open time Access programming mode 0 N HHMMhhmm H N: sets of auto-open zone (N=0=st set; N==nd set) HHMMhhmm=Staring time to ending time (e.g. 0000=0:0 to :00) H= days of week + Holiday (Sun/Mon/Tue/Wed/Thu/Fri/Sat) (H= 0: disable; : enable); Holidays establish by the software. [e.g.] To set the second time zone as :0 AM to :0 PM, Monday, Wednesday and Friday: Done H. Lift control Connect with AR-0ROB to control floors which the user will be able to access. Enable Please refer to below floor chart Access programming mode 00 [00= enable lift control] Floor/ Stop Single floor Set F F F F F F F Access programming mode UUUUU FF 0 UUUU=User Address FF=Floor number (0~ floor) 0 [e.g.] User address NO., allow to access the th floor: Multi floors 0 Access programming mode UUUUU S FFFFFFFF [UUUUU=User address S: sets of lift control (Input: 0~) FFFFFFFF: floors setting (F=0=Disable, F==Enable) [e.g.] User address NO., only to the th and the 0th floor: Access programming mode F

7 SOYAL AR- (H) / AR- (H)/ AR-(H) / AR- (H) / AR- (H) ACCESS CONTROL SYSTEM V0 I. Setting Up the Arming Alarm conditions:. Arming is enabled.alarm system connected Application:. Door open too long: Door is open longer than door relay time plus door close time.. Force open (Opened without a valid user card): Access by force or illegal procedure.. Door position abnormal: Arming is enabled and the power is suddenly off then on. Enable/Disable Arming status (for M/M; Factory default armingcode is: ) : Standby Mode After door open The normal procedure to open door Input digit arming code Do not open the door Input digit arming code Present valid card Enter Program Mode Enable: Access programming mode [The normal procedure to open door] can refer to [Access Mode]. Function Default Value AR- (H) / AR- (H) / AR- (H) / AR- (H) / AR- (H) 0 DDD Default Value Function Selection Value Application Attendance Auto Re-lock Auto Open Door open button input Master of Network Access/Exit Anti-pass-back 0: 0: Disable 0: Disable 0: Disable 0: Slave 0: Exit 0: Disable : : Enable : Enable : Enable : Mater : Access : Enable /Stand-Alone /Stand-Alone /Stand-Alone DDD Default Value Function Selection Value Application Dual Door Control 0: Disable : Enable 0 /Stand-Alone Force Open Alarm Output 0: Disable : Enable /Stand-Alone AR- (H) / AR- (H) / AR- (H) / AR- (H) DDD Default Value Function Selection ValueApplication Auto-open door without 0: Disable : Enable 00 /Stand-Alone cards at auto open zone Alarm Output/ Lift 0: Alarm Output : Lift Control 00 /Stand-Alone Control Stop Alarm by door 0: ne : 0 /Stand-Alone close or by push button Door bell 0: Disable : Enable /Stand-Alone Mode / Mode / Mode Mode M M M / Stand-Alone / Stand-Alone Stand-Alone / Stand-Alone User Capacity,0 { (H)/ (H)},000 { (H)/ (H)/ (H)},,0 { (H)/ (H)},000 { (H)/ (H)/ (H)} Factory Reset by its commands Access Mode.Card only.card and PIN (-digit PIN)+.Card or User address (-digit) + Individual PIN (-digit individual PIN) +.Card only.card and PIN (-digit public PIN= Arming PWD)+.Card or PIN (-digit public PIN= Duress code).card only.card and PIN (-digit individual PIN)+.Card or PIN (-digit individual PIN) Disable: Access programming mode AR- (H) Selection= 0(none value)/ ( x each value) [e.g.] DDD value of Enable Auto Open + Exit by Push Button + Anti-pass-back =00+0+=; As a result of that, the command will be 0. DDD Default Value Function Selection Value Application Auto-open door without 0: Disable cards at auto open zone : Enable 00 /Stand-Alone Lift Control/ Duress Function 0: Duress :Lift Control 00 /Stand-Alone Stop Alarm by door open or door close button 0: ne : 0 /Stand-Alone Auto-show Duty time Mode, the number of users up to, since it reads CARD CODE( digits) only, unlike that Mode/Mode read SITE CODE and CARD CODE(0 digits). When the device is stand-alone (not networking) Access programming mode te: After the Master Code is changed, factory reset doesn t restore the Master Code back to. Event log Capacity,00 (H),00 (H)/ (H)/ (H),000 (H),00 (H),00 (H)/ (H)/ (H),000 (H) 0 Holidays Anti force Time Zone Lift Control Anti-passback

8 Access Touch-panel Metal Housing / Illuminated Touch-panel V0 Command List Function Entering programming mode Command PPPPPP PPPPPP=Master Code, default value= Mode M/M/M Exiting programming mode M//MM Exiting programming mode and enabling arming status de ID setting (Connecting to E) de ID setting (Connecting to PC directly 00 NNN 00 NNN VVV nnn NNN=de ID, range: 00~ NNN=de ID of Access, VVV=Virtual E de ID, M/M M/M M/M without via E) Mifare tag / card format (Optional) 0 N nnn=door number; range:00~ N: 0=ISOA; =ISOB; =ISO; M/M =I Code; =I Code PS.. Please select the compliance,first.. Make sure reader and card using the same compliance. Door relay time setting 0 TTT TTT=Door relay time 000= Output constantly M/MM 00~00=~00 sec. 0~0=0.~0. sec. Alarm relay time setting Control mode setting Arming delay time setting Alarm delay time setting Master card setting 0 TTT 0 N 0 TTT 0 TTT 0 SSSSS EEEEE TTT=Alarm relay time 000= Output constantly 00~00=~00 sec. N=Mode =Mode;=Mode;=Mode TTT=Arming delay time 00~00=~00 sec. TTT=Alarm delay time 00~00=~00 sec. SSSSS-EEEEE= ( for AR-H); M/M/M M/M/M M/M/M M/M/M M/M SSSSS=Starting user address; EEEEE=Ending user address Auto-open time zone setting 0 N HHMMhhmm H N= 0(st time zone) / (nd time zone) M/M/M HHMM= Starting time; hhmm= ending time (i.e.: 0000=0:0 to :00) H= days of week (Sun/Mon/Tue/Wed/Thu/Fri/Sat)+ Holiday (H= 0: disable; : enable); Holidays establish by the software. Master code setting 0 PPPPPPRRRRRR PPPPPP=New master code M/M/M RRRRRR=Repeat the new master code Suspend / Delete tag Set a sequence of cards as "read and access" 0 SSSSS EEEEE 0 SSSSS EEEEE SSSSS EEEEE =Suspend =Delete; SSSSS=Starting user address, EEEEE=Ending user address SSSSS=Starting card number M/M/M M EEEEE=Ending card number Active the suspended cards SSSSS EEEEE SSSSS=Starting user address M/M EEEEE=Ending user address Set the cards as Card mode OR PIN mode UUUUU PPPP Access mode: Card or PIN; UUUUU=user address; M/M by user address Set the cards as Card AND PIN mode UUUUU PPPP PPPP=-digit pass code 000~ Access mode: Card and PIN; UUUUU=user address; M/M by user address PPPP=-digit pass code 000~ Arming output time setting M/M: Duress code setting TTT PPPP TTT=Arming output time; 000~0=0~. sec. PPPP=-digit pass code ( default value=0000 ) M/M M/M/M M: Public PIN setting (Card or PIN) P.S. Duress code will be unavailable and become a public PIN at access mode Card or PIN of M Card number modification M/M: Arming pass code setting UUUUU SSSSSCCCCC PPPP UUUUU= User address; SSSSS=-digit site code; CCCCC=-digit card code PPPP=-digit pass code ( default value=; disable Arming PWD=0000) M/M M/M/M M: Public PIN setting (Card and PIN) P.S. Arming PWD code will be unavailable and become a public PIN at access mode Card PIN and of M Door open waiting time Set the card by induction(m/m) TTT UUUUU QQQQQ TTT=Door open waiting time: 00~00=~00 sec.; default value: sec. UUUUU=User address; M/M/M M/M QQQQQ=Card quantity(0000=continuously inducting) Reader additional setting Lift control setting: multi-doors 0 DDD UUUUU S FFFFFFFF Please refer to function default value for details. UUUUU=User address, S= sets of lift control(0~); FFFFFFFF= assigned floor M/M/M M/M (F=0: Disable, : Enable) Add/Delete tag by induction (M only) AR-0RO Lift Relay Activated TM parameter setting time clock setting Anti-pass-back (Enable user) N NNN TTT DDD YYMMDDHHmmss SSSSS EEEEE N N=0(Delete tag); N=(Add tag) NNN=site number, TTT= relay time: 000~00=~00 sec. Please refer to function default value for details. YYMMDDHHmmss: Year/ Month/ Day/ Hour/ Min./ Sec. SSSSS=Starting user address; EEEEE=Ending user address; M M/M M/M/M M/M/M M/M N=0/Enable; N=/Disable; N=/Initial Single floor setting Dual door control/ Active or inactive arming for force open Delete all tags Enable the security trigger signal ( with AR-RB) UUUUU FF DDD (H/H/H/H) 0 (H) 000 (Disable) UUUUU=User Address; FF=Floor (0~ floor) Please refer to function default value for details. To Change the "Arming" (in P ) become the security trigger signal, when controller is connected with AR-RB. M/M M/M/M M/M/M M/M/M

SOYAL AR-321H/AR-331H/ AR-721H/AR-725H/AR-757H ACCESS CONTROL SYSTEM V Contents AR-321H [Touch-panel Metal Housing] 1 Product 2 User Guide 3 Ter

SOYAL AR-321H/AR-331H/ AR-721H/AR-725H/AR-757H ACCESS CONTROL SYSTEM V Contents AR-321H [Touch-panel Metal Housing] 1 Product 2 User Guide 3 Ter SOYAL AR-H/AR-H/ AR-H/AR-H/AR-H ACCESS CONTROL SYSTEM Contents AR-H [Touch-panel Metal Housing] Product User Guide Terminal Cables Water proof Strip d x AR-H [Touch-panel Metal Housing]/ AR-H-S [Metal

More information

SOYAL AR-321H/AR-721H/ AR-725H/AR-757H ACCESS CONTROL SYSTEM. Contents AR-321H [Metal Case] AR-721H. AR-725H [Illuminated Touch-panel] AR-725H-M

SOYAL AR-321H/AR-721H/ AR-725H/AR-757H ACCESS CONTROL SYSTEM. Contents AR-321H [Metal Case] AR-721H. AR-725H [Illuminated Touch-panel] AR-725H-M SOYAL AR-H/AR-H/ AR-H/ ACCESS CONTROL SYSTEM Contents AR-H [Metal Case] Product Water proof Strip d x AR-H Product f x AR-H [Illuminated Touch-panel] AR-H-M Products c x e x A. B. C. D. AR-H Products f

More information

Option. AR-701B-X Fit 35mm DIN Rail or Mount directly AR-721K AR-725K AR-331K 1456 RAM. WG 26 / WG 34 Power Supply. YES Power Consumption

Option. AR-701B-X Fit 35mm DIN Rail or Mount directly AR-721K AR-725K AR-331K 1456 RAM. WG 26 / WG 34 Power Supply. YES Power Consumption SOYAL ACCESS CTROL SYSTEM AR-E V0 Contents Product User Guide Panel Mounting Base WG Key-panel Reader Option AR-0B-X Fit mm DIN Rail or Mount directly AR-K AR-K AR-K Option For Stand-alone Command Setting

More information

SOYAL AR-725E-M / AR-725E / AR-725X V Contents AR-725E-M. Installation AR-725E-M AR-725E AR-725X. Parts Description AR-725E AR-725X

SOYAL AR-725E-M / AR-725E / AR-725X V Contents AR-725E-M. Installation AR-725E-M AR-725E AR-725X. Parts Description AR-725E AR-725X SOYAL ACCESS CONTROL SYSTEM AR-E-M / AR-E / AR- 0909 Contents AR-E-M Products User Guide Terminal Cables Tools P P P P c x d x A. B. C. D. P P P P AR-E Products User Guide Terminal Cables Tools P P P P

More information

SOYAL AR-725 (E-V2) V Contents AR-725 (E-V2-M) Installation AR-725 (E-V2-M) AR-725 (E-V2) AR-725 (X) Parts Description AR-725 (E-V2) AR-725 (X)

SOYAL AR-725 (E-V2) V Contents AR-725 (E-V2-M) Installation AR-725 (E-V2-M) AR-725 (E-V2) AR-725 (X) Parts Description AR-725 (E-V2) AR-725 (X) SOYAL ACCESS CONTROL SYSTEM AR- (E-V) V0 Contents AR- (E-V-M) Products User Guide Terminal Cables Tools P P P c x d x A. B. C. D. P P P P AR- (E-V) Products User Guide Terminal Cables Tools P P P e x A.

More information

ECL-ACC980IP-V2/VP. Contents ECL-ACC980IP-V2. Installation ECL-ACC980IP-V2 ECL-ACC980IP-VP. Parts Description ECL-ACC980IP-VP A. B. C.

ECL-ACC980IP-V2/VP. Contents ECL-ACC980IP-V2. Installation ECL-ACC980IP-V2 ECL-ACC980IP-VP. Parts Description ECL-ACC980IP-VP A. B. C. EC-ACC90IP-/P Contents EC-ACC90IP- Products User Guide Terminal Cables Tools P P P a x A. E. F. P P P P EC-ACC90IP-P Products User Guide Terminal Cables Tools P P P b x A. B. C. D. P P P P c x Parts Description

More information

AR-881(EF-MT) P4 P5 P6 P7. P7 only provide to the controller that have doorbell function.

AR-881(EF-MT) P4 P5 P6 P7. P7 only provide to the controller that have doorbell function. SOYAL ACCESS CONTROL SYSTEM AR- (EF) V00 Contents Product User Guide Terminal Cables Tools Optional P P P Flat Head Cap Philips Tapping Screw: x0 Security Torx: Mx0 WG keyboard AR-(EF-DO) Installation

More information

Biometrics Device Access controller Fingerprint & Finger Vein V Connector Table () Cable: P Wire Application Anti-Tamper Switch Wire Color Red Orange

Biometrics Device Access controller Fingerprint & Finger Vein V Connector Table () Cable: P Wire Application Anti-Tamper Switch Wire Color Red Orange SOYAL ACCESS CONTROL SYSTEM AR- (EF-V) / (EV-V) V Contents AR- (EF-V):Fingerprint Products User Guide Terminal Cables Tools Optional P P P AR- (EV-V):Vein P P P AR-RB Products User Guide Terminal Cables

More information

SOYAL AR-331(EF) Contents. Front Panel & Indicator. Installation. Connector Table CN6 CN2 V Option. 4 Accessories. 2 Terminal Cables 3 Tools

SOYAL AR-331(EF) Contents. Front Panel & Indicator. Installation. Connector Table CN6 CN2 V Option. 4 Accessories. 2 Terminal Cables 3 Tools SOYAL ACCESS CONTROL SYSTEM AR- (E/EF) V0 Contents Product Terminal Cables Tools Accessories Option P P Flat Head Cap Philips Tapping Screw: x0 Security Torx: Mx0 AR-(E) AR-(EF) P P P Security Torx Wrenches

More information

P4 P5 P6. Security trigger signal 2 Purple Security trigger signal Output 6 Thin Blue Wiegand DAT: 1 Input

P4 P5 P6. Security trigger signal 2 Purple Security trigger signal Output 6 Thin Blue Wiegand DAT: 1 Input SOYAL ACCESS CONTROL SYSTEM AR- (E) / (EF) V Contents AR- (EF):Fingerprint Products User Guide Terminal Cables Tools DO AR- (E) Or MT P P P P P P P P P P P P Water proof Strip Optional Products User Guide

More information

Function Menu. 1.Add/Delete. 1. Password 2. Access Mode 3. Extend Options 4. Single Floor 5. Multi Floors 6. Enroll FP 7.

Function Menu. 1.Add/Delete. 1. Password 2. Access Mode 3. Extend Options 4. Single Floor 5. Multi Floors 6. Enroll FP 7. Function Menu 1.Add/Delete 2.User Setting 1. Password 2. Access Mode 3. Extend Options 4. Single Floor 5. Multi Floors 6. Enroll FP 7. Delete FP 1. Add - Card ID 2. Add - RF-learn 3. Suspend - Addr 4.

More information

CV-550SPK V2 Waterproof Keypad/Reader/Controller Installation Instructions

CV-550SPK V2 Waterproof Keypad/Reader/Controller Installation Instructions CV-550SPK V2 Waterproof Keypad/Reader/Controller Installation Instructions Packing List NAME MODEL/SIZE QTY Self tapping screw 0.15 x 1.06 (4mm 27 mm) Rubber plug 0.23 x 1.2 (6mm 30 mm) Star screw driver

More information

Digital Keypad Introduction

Digital Keypad  Introduction K2 Digital Keypad Introduction The K02 uses the latest microprocessor technology to operate door strikes and security systems that require a momentary (timed) or latching dry contact closure. All programming

More information

QUICK START GUIDE. 2.4 Inch Finger Vein Terminal Time Attendance & Access Control

QUICK START GUIDE. 2.4 Inch Finger Vein Terminal Time Attendance & Access Control QUICK START GUIDE 2.4 Inch Finger Vein Terminal Time Attendance & Access Control Version: 1.0 Date: Apr., 2017 1 2.4-Inch TFT LCD USB Storage Device Port Keypad& Card Reader Doorbell & LED Indicator Fingerprint

More information

AR-721E-V2 (AR-721E-V2-X) AR-701B-X Fit 35mm DIN Rail or Mount directly 16,000 32,000. Connector CN18 Host TCP/IP. Code Pin Description

AR-721E-V2 (AR-721E-V2-X) AR-701B-X Fit 35mm DIN Rail or Mount directly 16,000 32,000. Connector CN18 Host TCP/IP. Code Pin Description SOYAL ACCESS CTROL SYSTEM AR-E-V V0 Contents Product User Guide Panel Mounting Base (AR-E-V-X) Metal Box (AR-E-V-M) Option Option Specification CPU Memory Power Supply Power Consumption Interface / Baud

More information

Partizan PAB-FC2. Fingerprint scan time Fingerprint identification time. <0.5 s < % <0.0198% Ingress protection rating

Partizan PAB-FC2. Fingerprint scan time Fingerprint identification time. <0.5 s < % <0.0198% Ingress protection rating 1. Features & Technical Parameters 1.1 Features: Partizan PAB-FC2 Metal vandalproof housing Secure and reliable biometric fingerprint recognition Simple for using, wiring can be done by a user without

More information

CV-110SPK Standalone Keypad/Prox Access Control Installation Instructions

CV-110SPK Standalone Keypad/Prox Access Control Installation Instructions CV-110SPK Standalone Keypad/Prox Access Control Installation Instructions 1. Packing List Qty Name Remarks 1 1 1 2 2 1 Keypad User manual Screwdriver Wall plugs Self-tapping screws Torx screw 0.8 x 2.4

More information

CM-110SK Standalone Keypad Installation Instructions

CM-110SK Standalone Keypad Installation Instructions CM-0SK Standalone Keypad Installation Instructions. Packing List Qty Name Remarks 2 2 Keypad User manual Screwdriver Wall plugs Self-tapping screws Torx screw 0.8 x 2.4 Φ(20 mm 60 mm) 0.24 x.2 Φ (6 mm

More information

EL-ST100 KEYPAD CONTROLLER

EL-ST100 KEYPAD CONTROLLER WIRING DIAGRAM EL-ST100 KEYPAD CONTROLLER WEATHER-PROOF STANDALONE ACCESS CONTROLLER WITH KEYPAD & PROXIMITY TECHNOLOGY Programming and Installation Manual NOTE: www.elock2u.com ICT at work! Version 3.6

More information

Single Door Standalone Access Control User Manual

Single Door Standalone Access Control User Manual Single Door Standalone Access Control User Manual Reading this manual carefully before install and use the device 1. Packing List Name Quantity Remarks Keypad User manual Screw driver Rubber plug Self

More information

AR-727H. Technical Manual. 26 August Version 1.00

AR-727H. Technical Manual. 26 August Version 1.00 AR-727H Technical Manual 26 August 2008 Version 1.00 Southern Office: Raytel House Brook Road Rayleigh Essex, SS6 7XH Tel: (01268) 749310 Fax: (01268) 749315 Northern Office: Unit 3 Block 5 Oakbank Industrial

More information

AR-727HB-RAY AR-716E-RAY EAR-727HB-RAY Series of Controllers

AR-727HB-RAY AR-716E-RAY EAR-727HB-RAY Series of Controllers AR-727HB-RAY AR-716E-RAY EAR-727HB-RAY Series of Controllers Installation and Programming Guide AR-716E-RAY EAR-727HB-RAY AR-727HB-RAY 10th August 2011 Version 1.00 Southern Office: Raytel House Brook

More information

Standalone Keypad Access Control. User Manual. Please read the manual carefully before use this unit

Standalone Keypad Access Control. User Manual. Please read the manual carefully before use this unit Standalone Keypad Access Control User Manual Please read the manual carefully before use this unit 1. Packing List Name Quantity Remarks Keypad 1 User manual 1 Screw driver 1 Φ20mm 60mm,Special for keypad

More information

Standalone Keypad Access Control. User Manual. SS-TS2000 Size:120*80*25 mm

Standalone Keypad Access Control. User Manual. SS-TS2000 Size:120*80*25 mm Standalone Keypad Access Control User Manual SS-TS2000 Size:120*80*25 mm Please read the manual carefully before use this unit 1. Packing List Name Quantity Remarks Keypad 1 User manual 1 Screw driver

More information

EZTAG3 PROXIMITY AND KEYPAD DOOR ENTRY

EZTAG3 PROXIMITY AND KEYPAD DOOR ENTRY EZTAG PROXIMITY AND KEYPAD DOOR ENTRY USER MANUAL www.espuk.com EZTAG Manual_Layout.indd 8//06 5:8:0 System Components Proximity and Reader 0 x Proximity Tags x Hex Key x Plastic wall plug x Countersunk

More information

Quick Start Guide. ProBio & ProFAC + ZKBioSecurity 3.0

Quick Start Guide. ProBio & ProFAC + ZKBioSecurity 3.0 Quick Start Guide ProBio & ProFAC + ZKBioSecurity 3.0 CONTENT 1 Safety Precautions...2 On Using Face Recognition Device...3 Device Overview...5 Product Dimensions & Installation...6 Power Connection...7

More information

DG-800 Stand-Alone Proximity Reader Instruction Manual

DG-800 Stand-Alone Proximity Reader Instruction Manual DG-800 Stand-Alone Proximity Reader Instruction Manual I. Features 1. Memory volume up to 1000+10 proximity cards/tokens and PINs with the programming time up to 0.5 seconds. 2. Access modes: a. Only Proximity

More information

W3-H Waterproof Keypad/Reader/Controller

W3-H Waterproof Keypad/Reader/Controller W3-H Waterproof Keypad/Reader/Controller User Manual 1. Packing list Name Quantity Digital Keypad W3-H 1 User Manual 1 Screw Driver Rubber Bungs Self Tapping Screws Diode 1 4 4 1 Manager Card 2 Remark

More information

Waterproof. Keypad/Reader/Controller

Waterproof. Keypad/Reader/Controller Waterproof Keypad/Reader/Controller User Manual W1-C W3-C User manual 1. Packing List Name Quantity Remarks Digital Keypad-W1-C/W3-C 1 User manual 1 Screw driver 1 Rubber bungs 4 6*27mm, used for fixing

More information

EZTAG3 PROXIMITY AND KEYPAD DOOR ENTRY

EZTAG3 PROXIMITY AND KEYPAD DOOR ENTRY EZTAG Manual.qxp_Layout 0/0/06 :7 Page EZTAG PROXIMITY AND KEYPAD DOOR ENTRY USER MANUAL www.espuk.com EZTAG Manual.qxp_Layout 0/0/06 :7 Page System Components Proximity and Reader 0 x Proximity Tags x

More information

QUICK START GUIDE. 2.4 Inch TFT Terminal Time Attendance & Access Control

QUICK START GUIDE. 2.4 Inch TFT Terminal Time Attendance & Access Control QUICK START GUIDE 2.4 Inch TFT Terminal Time Attendance & Access Control Safety Precautions The following precautions are to keep user safe and prevent any damage. Please read carefully before installation.

More information

EZ-TAG2 Manual_Layout 5 11/12/ :14 Page 1 U S E R M A N UAL

EZ-TAG2 Manual_Layout 5 11/12/ :14 Page 1 U S E R M A N UAL EZ-TAG2 Manual_Layout 5 11/12/2012 09:14 Page 1 USER MANUAL EZ-TAG2 Manual_Layout 5 11/12/2012 09:14 Page 2 Contents EZ-TAG2 and Back Plate 1 x Security Torx Key 4 x Screws and raw plugs 1 x Marking out

More information

F6-Fingerprint. Access Control/Reader. User Manual. F6 - Simplified Instruction. (Master Code) # (Factory default:1234) Enter the Programming Mode

F6-Fingerprint. Access Control/Reader. User Manual. F6 - Simplified Instruction. (Master Code) # (Factory default:1234) Enter the Programming Mode -Fingerprint Access Control/Reader Function Description Enter the Programming Mode - Simplified Instruction Operation (Factory default:1234) Change the Master Code Add Fingerprint User Add Card User Add

More information

Instruction Manual. Vogue. Security. Technology. Innovation 2013-V01

Instruction Manual. Vogue. Security. Technology. Innovation 2013-V01 Instruction Manual DH16A-60DTE Model 60 with plastic keypad, stand alone access control DH16A-60DTQE Model 60 with plastic keypad, networked access control 2013-V01 Security Technology Vogue Innovation

More information

User Manual. Split access control with intelligent secured power supply.

User Manual. Split access control with intelligent secured power supply. User Manual Split access control with intelligent secured power supply. Contents. Introduction, features and specifications. Installation and Wiring Diagram 3. Manager Card Operation 4. User Settings 5.

More information

Fingerprint Access Control F1. User Manual

Fingerprint Access Control F1. User Manual Fingerprint Access Control F1 User Manual 1. Introduction F1 is a metal shell standalone fingerprint access control, using the America Atmel s MCU, with precise electron circuit and good productive technology.

More information

SF200. Installation Guide & Quick Start Guide. 2 TFT AC Terminal Version: 1.0 Date: June 2014

SF200. Installation Guide & Quick Start Guide. 2 TFT AC Terminal Version: 1.0 Date: June 2014 SF200 Installation Guide & Quick Start Guide 2 TFT AC Terminal Version: 1.0 Date: June 2014 All design and specification declared are subject to change without notice in advance. Contents Safety Precautions

More information

W3-M. Metal waterproof standalone access control/reader. User Manual

W3-M. Metal waterproof standalone access control/reader. User Manual W3M Metal waterproof standalone access control/reader User Manual Name Digital Keypad W3M User Manual Screw driver Rubber bungs Selftapping screws Diode 1. Packing List Quantity 1 1 1 4 4 1 Remark 6*27mm,

More information

INSTALLATION INSTRUCTIONS 920P EntryCheck TM

INSTALLATION INSTRUCTIONS 920P EntryCheck TM 801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS 920P EntryCheck TM The EntryCheck 920P Indoor/Outdoor Keypad is a surface-mount

More information

GV-AS/EV Controller. User s Manual

GV-AS/EV Controller. User s Manual GV-AS/EV Controller User s Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. AS100.110.120.210.400.410.810-EV48-C

More information

2000 Series e/em Style Keypad Installation and Programming Manual

2000 Series e/em Style Keypad Installation and Programming Manual 2000 Series e/em Style Keypad Installation and Programming Manual Document Number: 6054022 Revision: 0 Date: 12/21/06 Table of Contents Table of Contents Section 1: Introduction... 6 1 Product Description...6

More information

Finger Vein Access Control device Quick Start Guide Version: 1.0 Date: June USB slot. USB slot

Finger Vein Access Control device Quick Start Guide Version: 1.0 Date: June USB slot. USB slot Overview Fingerprint & Finger Vein Device Front Left Side: Finger Vein Device Touch screen Card reader Fingerprint reader Finger vein reader Finger vein sensor: During registration, after finger touches

More information

CC Series metal access control Manual

CC Series metal access control Manual CC Series metal access control Manual 1.Description CC Series is a standalone for two doors, support card, pin, card+pin access way. It is with 2 relays to control 2 doors and supports up to 2000 users

More information

GV-AS Controller. Installation Guide

GV-AS Controller. Installation Guide GV-AS Controller Installation Guide Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 2011 GeoVision, Inc. All rights reserved.

More information

GV-Card Reader. User s Manual

GV-Card Reader. User s Manual GV-Card Reader User s Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. READER-B 2016 GeoVision, Inc. All rights

More information

HSY-S209 EM Metal waterproof access control system User Manual

HSY-S209 EM Metal waterproof access control system User Manual HSY-S209 EM Metal waterproof access control system User Manual Reading carefully before Install and use this manual 1. Product Profile The product is Contact-less inductive card Metal Password Access Controller,

More information

REX F-0-9 Standalone or Access Controller

REX F-0-9 Standalone or Access Controller REX F-0-9 Standalone or Access Controller Power supply The controller need s external power supply to operate. The Spider W40 power supply is sufficient to power two controllers and two 12V electric strikes

More information

TEC100 USER/INSTALLER MANUAL V2.0 REV. 03/2018

TEC100 USER/INSTALLER MANUAL V2.0 REV. 03/2018 TEC100 USER/INSTALLER MANUAL V2.0 REV. 03/2018 00. CONTT 01. SAFETY INSTRUCTIONS INDEX 01. SAFETY INSTRUCTIONS STANDARDS TO FOLLOW 02. PRODUCT PRODUCT PROFILE TECHNICAL PARAMETERS 03. INSTALLATION PRODUCT

More information

VIDI-AC-2CS Access Controller/ Reader

VIDI-AC-2CS Access Controller/ Reader VIDI-AC-2CS Access Controller/ Reader User Manual CONTENTS INTRODUCTION 2 INSTALLATION.4 STANDALONE MODE 6 CONTROLLER MODE.11 WIEGAND READER MODE.. 13 ADVANCE APPLICATION..14 1 INTRODUCTION The VIDI-AC-2CS

More information

KP2000E/EM Series Style Keypad

KP2000E/EM Series Style Keypad 23852973 KP2000E/EM Series Style Keypad Installation and Programming Instructions Models KP2000EXX and KP2000EMXX Specifications Parameter Voltage Requirements Keypad Current Requirements (Max) Relay Contact

More information

Operation manual For NG BIOSINGLE Version 1.1

Operation manual For NG BIOSINGLE Version 1.1 Operation manual For NG BIOSINGLE Version 1.1 SMART-I ELECTRONICS SYSTEMS PVT. LTD.(An ISO 9001:2008 certified company) R&D, Training & Customer Support Center: First Floor, Arihant Plaza Phase II, Village-Ovala,

More information

Safety Precautions How to place the finger Product Contents Product PIN Diagram Product Dimensions Cables and Connectors Installation of Back Plate

Safety Precautions How to place the finger Product Contents Product PIN Diagram Product Dimensions Cables and Connectors Installation of Back Plate www.zkaccess.com Safety Precautions How to place the finger Product Contents Product PIN Diagram Product Dimensions Cables and Connectors Installation of Back Plate Power Connection Ethernet Connection

More information

212iL Rev. 1.1

212iL Rev. 1.1 212iL 1 International Electronics, Inc. 427 Turnpike Street Canton, Massachusetts 02021 212iL (illuminated Luxury) Keypad Single Unit Keypad- Control Installation Manual Features: 120 User Capability Illuminated

More information

RD-SR2 ACCESS SECURITY PRODUCTS LTD. Proximity Card Reader with Remote Control. User Manual

RD-SR2 ACCESS SECURITY PRODUCTS LTD. Proximity Card Reader with Remote Control. User Manual RD-SR2 Proximity Card Reader with Remote Control User Manual INTRODUCTION The RD-SR2 is a compact, weather resistant multi-function card reader that can be used as a standalone programmable access control

More information

Click Save to return to the main Setup screen.

Click Save to return to the main Setup screen. ON-SITE Setup Guide Thank you for purchasing the ON-SITE. This guide will assist you in the setup of the system. You can call for FREE technical support to get help anytime at 757-258-0910. Please note,

More information

INSTALLATION GUIDE 2.4 Inch TFT Terminal Time Attendance & Access Control

INSTALLATION GUIDE 2.4 Inch TFT Terminal Time Attendance & Access Control STALLATION GUIDE.4 Inch TFT Terminal Time Attendance & Access Control Optional accessories Safety Precautions The following precautions are to keep user s safe and prevent any damage. Please read carefully

More information

INSTALLATION INSTRUCTIONS 920 EntryCheck TM

INSTALLATION INSTRUCTIONS 920 EntryCheck TM 801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS 920 EntryCheck TM The EntryCheck 920 Indoor/Outdoor Keypad is a surface-mount

More information

DOLXFD1000B. Waterproof Access Control/Reader

DOLXFD1000B. Waterproof Access Control/Reader DOLXFD1000B Waterproof Access Control/Reader INTRODUCTION The DOLXFD1000B is a single- entry multi-function Access Controller with integrated keypad and card reader. It is designed and manufactured to

More information

MS-7000: SuperStar Reader

MS-7000: SuperStar Reader The MS-7000 SuperStar Reader The MS-7000 SuperStar Reader is intended for installation in proximity applications where an extended read range is required. The reader provides an audio beeper and a multi

More information

User Manual. PCKeypad Wireless Keypad

User Manual. PCKeypad Wireless Keypad User Manual PCKeypad Wireless Keypad Description The PCKeypad is a wireless keypad with a PentaCODE transmitter built-in. It works with all of Elsema s PCR series receivers. The installer has the option

More information

Indoor/Outdoor Proximity Reader and Keypad with 10cm (4in) Read Range

Indoor/Outdoor Proximity Reader and Keypad with 10cm (4in) Read Range Indoor/Outdoor Proximity Reader and Keypad with 10cm (4in) Read Range Stand alone CR-R885-SB Installation and Operating Instructions V1.1 TABLE OF CONTENTS Installation... 2 Mounting and Wiring... 2 Mounting

More information

Standalone Access Control

Standalone Access Control Standalone Access Control BELL_A BELL_B D0 D1 D_in(LED) Open (BZ) COM ALARM- Light Green Pink Red Black Green White Brown Yellow Blue Purple Orange Grey Door Bell DC 12V Power Green White Reader Red Black

More information

BC Digital Keypad. User Manual

BC Digital Keypad. User Manual BC2200 Digital Keypad User Manual Name Digital Keypad BC2200 User manual Screw driver Rubber bungs Self tapping screws Diode 1. Packing List Quantity Remarks 1 1 1 4 Φ6mm 28 mm, used for fixing 4 Φ4mm

More information

GV-AS/EV Controller. User s Manual

GV-AS/EV Controller. User s Manual GV-AS/EV Controller User s Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ASEV-H 2016 GeoVision, Inc. All rights

More information

GV-RK1352 and GV-R1352 Card Reader

GV-RK1352 and GV-R1352 Card Reader GV-RK1352 and GV-R1352 Card Reader The GV-RK1352 and GV-R1352 are card readers designed to recognize identifications cards. GV-RK1352 comes with keypad, allowing it to also recognize PIN codes. Featured

More information

ACTpro Single Door IP Controller. Operating & Installation Instructions

ACTpro Single Door IP Controller. Operating & Installation Instructions ACTpro 1500 Single Door IP Controller Operating & Installation Instructions 18-00079 Issue 1 This manual refers to the ACTpro 1500 a TCP/IP based control unit supporting up to 32 doors. Access Control

More information

Installation Instructions

Installation Instructions Alliance Arming Station AL-1111, AL-1116 1048520C September 2006 Copyright 2006, GE Security Inc. Introduction This is the GE Alliance Arming Station for models AL-1111 (four-line LCD) and AL-1116 (four-line

More information

WELCOME. For customer support or any inquiries, please visit our web site at or contact us at

WELCOME. For customer support or any inquiries, please visit our web site at  or contact us at WELCOME Congratulations on purchasing the GBF Smart Four Wire Intercom System. Our factory engineers were the first to enable multiple security cameras being monitored through a smart mobile device and

More information

Installation and User Manual

Installation and User Manual S2 Metal Waterproof Access Control Unit Installation and User Manual (Ness Part No. 101-082) 1 Introduction Ness S2 is an advanced, waterproof (IP65 rated) proximity and PIN Access Controller. S2 can support

More information

Operating Instructions KEYPAD. Compatible WIRELESS ACCESS CONTROL

Operating Instructions KEYPAD. Compatible WIRELESS ACCESS CONTROL Operating Instructions KEYPAD Compatible WIRELESS ACCESS CONTROL Contents Technical specifications page 1 Approvals page 1 Changing the Master code page 2 Adding a User code page 3 Deleting a User code

More information

W Series. Color Screen Fingerprint & Card Time Attendance and Access Control W 1 W 2

W Series. Color Screen Fingerprint & Card Time Attendance and Access Control W 1 W 2 W Series Color Screen Fingerprint & Card Time Attendance and Access Control W 1 W 2 W1 & W2 Features * Standard 2.8-inch TFT LCD, 512MB Flash, industrial high speed CPU * Touch keypad & touch active sensor

More information

Connecting a Cisco Reader Module

Connecting a Cisco Reader Module CHAPTER 3 Overview The optional Cisco Reader Module (Figure 3-1) is similar to the Cisco Physical Access Gateway, providing the same ports for Weigand readers and other input and output devices. The Cisco

More information

MS-5000: MiniStar Reader

MS-5000: MiniStar Reader The MS-5000 MiniStar Reader The MS-5000 MiniStar Reader is intended for installation in a single gang electrical "J-Box," in proximity applications where an unobtrusive reader is required. It can also

More information

232iLM Keypad Installation and Programming Instructions

232iLM Keypad Installation and Programming Instructions 232iLM Keypad Installation and Programming Instructions Note: This product is designed to be installed and serviced by security and lock industry professionals. Specifications Case Dimensions: 6 1 / 2

More information

ACCESS CONTROL SYSTEM

ACCESS CONTROL SYSTEM ACCESS CONTROL SYSTEM System versions Standalone controllers series based on integrated models KZ-400, 500, 600, 700, KZC-300,800, 900 KaDe Lite system based on integrated controllers KZ-1000 KaDe Premium

More information

RBR-SB-KTZ001 LAR 2. User Manual

RBR-SB-KTZ001 LAR 2. User Manual RBR-SB-KTZ001 LAR 2 User Manual INTRODUCTION KTZ001 is a compact, waterproof stand-alone programmable access control system that provides proximity entry for up to 2000 users. Read both EM and HID card.

More information

MS-5000 MiniStar Reader. Quick Start Guide MS The MS-5000 MiniStar Reader. 1.0 Specifications

MS-5000 MiniStar Reader. Quick Start Guide MS The MS-5000 MiniStar Reader. 1.0 Specifications The MiniStar Reader The MiniStar Reader is intended for installation in a single gang electrical "J-Box," in proximity applications where an unobtrusive reader is required. It can also be mounted directly

More information

genesis TECHNICAL MANUAL Two-Door Controller GEN-045

genesis TECHNICAL MANUAL Two-Door Controller GEN-045 Two-Door Controller GEN-045 Genesis Electronics Australia Pty Ltd www.genesiselectronics.com.au info@genesiselectronics.com.au Australian Owned, Designed and Manufactured Distributed By:- Genesis reserves

More information

Cardax Prox Plus Mifare Reader

Cardax Prox Plus Mifare Reader Installation Note Cardax Prox Plus Mifare Reader CAUTION This equipment contains components that can be damaged by electrostatic discharge. Ensure both you and the equipment are earthed before beginning

More information

U-FLASH Setup Guide U-FLASH.

U-FLASH Setup Guide U-FLASH. U-FLASH Setup Guide Thank you for purchasing the U-FLASH. This guide will assist you in the setup of the system. You can call for FREE technical support to get help anytime at 757-258-0910. Please note,

More information

INSTALLATION INSTRUCTIONS 921P EntryCheck TM

INSTALLATION INSTRUCTIONS 921P EntryCheck TM 80 Avenida Acaso, Camarillo, Ca. 90 (805) 494-06 www.sdcsecurity.com E-mail: service@sdcsecurity.com INSTALLATION INSTRUCTIONS 9P EntryCheck TM The EntryCheck 9P Indoor/Outdoor Keypad is a surface mount

More information

Operation Manual. Thank you for selecting Keyking products. Please read this manual thoroughly before use. Models: TC418/419 Standalone Controller

Operation Manual. Thank you for selecting Keyking products. Please read this manual thoroughly before use. Models: TC418/419 Standalone Controller Operation Manual Thank you for selecting Keyking products. Please read this manual thoroughly before use. Models: TC418/419 Standalone Controller KEYKING GROUP Index Chapter 1: Summay...3 1.1 Outline...3

More information

Fingerprint Identification Proximity Reader. Quick Installation Guide

Fingerprint Identification Proximity Reader. Quick Installation Guide Fingerprint Identification Proximity Reader Quick Installation Guide 1. WHAT S INCLUDED Please unpack and check the contents of the box. If any of these parts are missing, please contact a nearby distributor

More information

VISTA 12a / 48a TECHNICAL TRAINING. The Best in Security plus Everyday Convenience & Control

VISTA 12a / 48a TECHNICAL TRAINING. The Best in Security plus Everyday Convenience & Control VISTA 12a / 48a TECHNICAL TRAINING The Best in Security plus Everyday Convenience & Control Version #.007 7th June 2005 VISTA 12a / 48a Training Guide Index 1. Vista Family Features....... p. 3 2. Wiring

More information

Specifications: Features:

Specifications: Features: ROFU Features: Applicable card mode EM Card / Key Fob 1 Administrator and 200 Users 200 Proximity Cards / Key fobs Access Modes:Use Bluetooth smartphone or Card / Key fob to access Built-in Tamper alarm

More information

Front-door station series for surface-mounting Profi-Economic PES Profi-Design PDS

Front-door station series for surface-mounting Profi-Economic PES Profi-Design PDS Product information Front-door station series for surface-mounting Profi-Economic PES Profi-Design PDS PI_GB_PES_PDS_Art0015689_1v0.doc 2 10/2005 In Table of contents Scope of delivery...3 Safety notices...3

More information

CP150B Vandal & Weather Resistant Keypad Security Systems

CP150B Vandal & Weather Resistant Keypad Security Systems Vandal & Weather Resistant Keypad Security Systems EN Security System CP150B - Vandal & Weather Resistant Keypad The CP150B keypad provides alarm and or access control functionality when used on selected

More information

Documentation on all Paxton products can be found on our web site -

Documentation on all Paxton products can be found on our web site - 02/23/2012 Ins-30168-US Net2 PaxLock Paxton Technical Support 1.800.672.7298 supportus@paxton-access.com Technical help is available: Monday - Friday from 02:00 AM - 8:00 PM (EST) Documentation on all

More information

Fingerprint Access Standalone User s Manual

Fingerprint Access Standalone User s Manual Fingerprint Access Standalone User s Manual V1.1.1 1 Table of Contents 1 Overview... 1 2 Device Structure and Installation... 2 2.1 Device Structure... 2 2.2 Device Installation... 3 3 System Structure...

More information

Installation Guide for PR311SE and PR311SE-BK v1.0 Access Controllers Rev. B

Installation Guide for PR311SE and PR311SE-BK v1.0 Access Controllers Rev. B Installation Guide for PR311SE and PR311SE-BK v1.0 Access Controllers Rev. B Introduction This document contains minimum information that is necessary to properly install the device and to perform its

More information

18/04/2013 Ins-30169 Net2 PaxLock Mifare Paxton Technical Support 01273 811011 support@paxton.co.uk Technical help is available: Monday - Friday from 07:00-19:00 (GMT) Saturday from 09:00-13:00 (GMT) Documentation

More information

SL2000E. Status Output. Electronic Code Lock. Features. Input. Exit Button Input. Introduction. Door Contact Input. Functional Description.

SL2000E. Status Output. Electronic Code Lock. Features. Input. Exit Button Input. Introduction. Door Contact Input. Functional Description. SL2000E Electronic Code Lock Features Door Relay output Status transistor output Aux transistor output Door Contact input Exit Button input INSTALLER code for programming MASTER code for arming/disarming

More information

VANDAL RESISTANT BACK-LIT WEATHERPROOF ACCESS CONTROL KEYPAD

VANDAL RESISTANT BACK-LIT WEATHERPROOF ACCESS CONTROL KEYPAD VANDAL RESISTANT BACK-LIT WEATHERPROOF ACCESS CONTROL KEYPAD Post Mount Keypad Programming & Installation Manual 1. Connect Power 12V DC to 24V AC/DC to terminals (+) and (-) Post Mount Keypad Quick Start

More information

Two Door Controller GEN-045

Two Door Controller GEN-045 Australian Owned, Designed and Manufactured Two Door Controller GEN-045 Genesis Electronics Australia Pty Ltd www.genesiselectronics.com.au Distributed by: Genesis reserves the right to change or modify

More information

Keypad CT2000. Art. No.: , (black) Art. No.: , (white) Installation Manual

Keypad CT2000. Art. No.: , (black) Art. No.: , (white) Installation Manual secure open Keypad CT Art. No.:, (black) Art. No.:, (white) Installation Manual CT_installation_ENGmay Conlan ApS Speditorvej A DK- Aalborg Tel: + Fax: + www.conlan.eu info@conlan.eu Table of contents.

More information

Revision Date: 02 Mar 2018

Revision Date: 02 Mar 2018 KAS Bluetooth Locks HOMES AIRBNB OFFICES SHARED SPACE Revision Date: 02 Mar 2018 COPYRIGHT: Information in this document is subject to change without further notice. No part of this document can be reproduced

More information

Installers & User guide Deadbolt 2S.

Installers & User guide Deadbolt 2S. Installers & User guide Deadbolt 2S. Version 0.2 05/18 As our igloohome app is frequently updated, there may be changes to this manual. Please refer to our website igloohome.co/support for the latest version

More information

-DTZ001- Stand-Alone Proximity Access Control. User Manual

-DTZ001- Stand-Alone Proximity Access Control. User Manual -DTZ001- Stand-Alone Proximity Access Control User Manual INTRODUCTION DTZ001 is a compact, waterproof stand-alone programmable access control system that provides proximity entry for up to 2000 users,

More information

Stand-alone Proximity Access Control

Stand-alone Proximity Access Control Stand-alone Proximity Access Control User Manual INTRODUCTION VIDI-AC-1C is a compact, waterproof stand-alone programmable access control system that provides proximity entry for up to 2000 users. It uses

More information

M U L TI - SP ORT SCOREBOARD

M U L TI - SP ORT SCOREBOARD M U L TI - SP ORT SCOREBOARD FEATURES: 24 hour clock display Count up timer with range to 9 hr. 59 min. 59 sec. Presettable countdown timer with loud beep Large 4 inch LCD digits for viewing from as far

More information