Uninterruptible power supply - TRIO-UPS/1AC/24DC/

Transcription

1 Uninterruptible power supply with integrated power supply unit, 5A, in combination with MINI-BAT/24/DC/.3 AH, QUINT-BAT/24DC 3,4AH, 7,2AH or 2 AH Key commercial data Packing unit PCE GTIN Custom tariff number Country of origin CHINA Input data Nominal input voltage range 00 V AC V AC Input voltage range AC 85 V AC V AC (Derating < 90 V AC: 2.5%V) Input voltage range DC 00 V DC V DC (UL508: V) AC frequency range 45 Hz Hz Frequency range DC 0 Hz 0.95 A. A (230 V AC).7 A.8 A (20 V AC) Inrush surge current < 44 A (<.3 A 2 s) Power failure bypass (refer to the diagram) Buffer period 20 min (5 A) Input fuse 6.3 A (slow-blow, internal)

2 Input data Power factor (cos phi) approx. 0.5 Type of protection Protective circuit/component Output data Nominal output voltage Setting range of the output voltage Output current Derating Transient surge protection Varistor 24 V DC Connection in parallel Yes, 2 Connection in series 22.5 V DC V DC (Network operation; in the buffer mode, dependent on the battery voltage of 27.9 V DC V DC) 5 A (-25 C C) 55 C C (2.5%/K) Control deviation < % (change in load, static 0%... 90%) Residual ripple Peak switching voltages nominal load General data Width Height Depth Net weight Memory medium Operating mode Efficiency Efficiency Efficiency Insulation voltage input/output Insulation voltage input/output Degree of protection Protection class MTBF (IEC 6709, SN 29500) Ambient temperature (operation) No < 0 mv PP < 25 mv PP 60 mm 30 mm 8 mm. kg External, battery.3 Ah / 3.4 Ah / 7.2 Ah / 2 Ah > 88 % (230 V AC, network operation) > 86 % (20 V AC, network operation) > 86 % (Battery operation) 4 kv (type test) 2 kv (Routine test) IP20 I > h Ambient temperature (storage/transport) -40 C C Max. permissible relative humidity (operation) -25 C C (> 55 C derating) 95 % (at 25 C, no condensation) Mounting position horizontal DIN rail NS 35, EN 6075 Assembly instructions Electromagnetic compatibility Noise emission EN Noise immunity EN :2005 Can be aligned: Horizontally 0 mm, vertically 50 mm Conformance with EMC Directive 2004/08/EC

3 General data Low Voltage Directive Standard Electrical equipment of machines EN Standard - Electrical safety Conformance with LV directive 2006/95/EC EN /VDE 0805 (SELV) Shipbuilding approval Germanischer Lloyd (EMC ) Standard Electronic equipment for use in electrical power installations and their assembly into electrical power installations Standard Safety extra-low voltage Standard Safety extra-low voltage EN 5078/VDE 060 (PELV) EN (SELV) EN (PELV) Standard - Safe isolation DIN VDE Standard - Safe isolation DIN VDE Standard Protection against electric shock DIN Standard Protection against shock currents, basic requirements for protective separation in electrical equipment DIN VDE Standard Limitation of mains harmonic currents EN UL approvals UL/C-UL listed UL 508 UL approvals UL/C-UL Recognized UL Connection data, input Connection method Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 2 Screw thread Connection data, output Connection method Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 2 Stripping length Signaling Screw connection M3 Screw connection 8 mm + 24 V Green LED

4 Signaling Mains voltage OK: Green LED, static at Conductor cross section solid min. Conductor cross section solid max. Conductor cross section stranded min. Conductor cross section stranded max. Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 2 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Screw thread M3 Output name Alarm Output description Transistor switching output Maximum switching voltage 24 V 24 V Continuous load current 200 ma Alarm Red LED, static at Output name Battery charge Output description Transistor switching output Maximum switching voltage 24 V 24 V Continuous load current 200 ma Battery (battery charge) is being charged Yellow LED, flashing Output name Battery mode Output description Transistor switching output Type of signaling LED, active switching output Maximum switching voltage 24 V 24 V Continuous load current 200 ma Battery operation (Battery Mode) LED yellow, static at Charging process Charge characteristic curve I/U characteristic curve Battery presence check/time interval 60 s Charge current 0.2 A....5 A (Default.0 A)

5 Charging process End-of-charge voltage 25 V DC V DC (Default 27.6 V DC) Classifications ETIM ETIM 2.0 ETIM 3.0 ETIM 4.0 ETIM 5.0 UNSPSC UNSPSC 3920 UNSPSC UNSPSC UNSPSC UNSPSC ecl@ss ecl@ss ecl@ss ecl@ss ecl@ss ecl@ss ecl@ss Drawings Block diagram Diagram t...[min] 2x 2V Battery L (+) N (-) PS IFS R Config.-Port Confirm Remote On/Off R2 Alarm Bat.-Mode Bat.-Charge Output DC 24 V 5 A Time [min] Time [h] =,3Ah 2 = 3,4Ah 3 = 7,2Ah 4 = 2Ah 0 0,5,5 2 2,5 3 3,5 4 4,5 5 Current [A]

6 Diagram Netzwiederkehr während der eingestellten Verzögerungszeit AC - Eingang 20/23 3 DC - Ausgang 6 Bat.-Mode delayed: aktiver Schaltausgang (parametrierbar) 0 LED grün POWER IN OK 9 LED gelb Bat.-Mode Verhalten des PCs Verzögerungszeit PC-Herunterfahren

7 Diagram Netzwiederkehr während der eingestellten Zeit PC-Herunterfahren AC - Eingang 20/23 3 DC - Ausgang 6 Bat.-Mode delayed: aktiver Schaltausgang (parametrierbar) 0 LED grün POWER IN OK 9 LED gelb Bat.-Mode Verhalten des PCs Verzögerungszeit PC-Herunterfahren PC- Leerlaufzeit