GE Digital Energy Multilin EPM 4600 Quickstart Guide TELEPHONE: FAX: HOME PAGE:
|
|
- Arnold Dorsey
- 6 years ago
- Views:
Transcription
1 GE Digital Energy Multilin EPM 4600 Multi-feed Power and Energy Metering Solution Quickstart Guide GE publication number: GEK ( A1) GE Digital Energy 650 Markland Street Markham, Ontario Canada L6C 0M1 TELEPHONE: Worldwide Europe/Middle East Africa North America toll-free FAX: Worldwide multilin.tech@ge.com Europe multilin.tech.euro@ge.com HOME PAGE: GE Multilin's Quality Management System is registered to ISO9001:2008 Internet: QMI #
2 Copyright 2013 GE Multilin Inc. All rights reserved. EPM 4600 Metering System. EPM 4600, Digital Energy, Multilin, and GE Multilin are trademarks or registered trademarks of GE Multilin1.0x Inc. The contents of this manual are the property of GE Multilin Inc. This documentation is furnished on license and may not be reproduced in whole or in part without the permission of GE Multilin. The manual is for informational use only and is subject to change without notice. Part number: A1 (August 2013)
3 EPM 4600 Table of Contents CHAPTER 1: MECHANICAL INSTALLATION Recommended Tools...3 Installation...4 CHAPTER 2: ELECTRONIC INSTALLATION Electronic Installation...7 CHAPTER 3: METERING SYSTEM CONFIGURATION Connecting the EPM Configuring the EPM Communications Settings...17 Updating the Device:...19 EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE i
4 ii EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE
5 EPM 4600 Multi-feed Power and Energy Metering Solution Chapter 1: Mechanical Installation Mechanical Installation Recommended Tools Recommended Tools for EPM 4600 Unit Installation: #2 Phillips screwdriver 1/4-inch (0.250 ) nut driver socket box, or open-end wrench wire cutters. The EPM 4600 unit is designed to withstand harsh environmental conditions; however it is recommended you install it in a dry location, free from dirt and corrosive substances EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE 3
6 CHAPTER 1: MECHANICAL INSTALLATION. 7.60in 3.03in 193.1mm 76.9mm 0.19in 4.8mm 0.80in 20.4mm 4.50in 114.3mm 0.12in centered 2.9mm 10.98in 278.9mm centered 11.28in 286.5mm 0.28in 7.2mm Installation To install the EPM 4600 Unit: 1. Mount the unit against any firm, flat surface. 2. Use a #10 screw in each of the four slots on the flange to ensure that the EPM 4600 unit is installed securely. IMPORTANT! For safety reasons, mount the EPM 4600 unit in an enclosed and protected environment, such as in a switchgear cabinet. 4 EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE
7 CHAPTER 1: MECHANICAL INSTALLATION 3. Connect an earth ground to the post on the side of the EPM 4600 unit, using an AWG 12 wire. 4. Install a switch or circuit breaker nearby; label it clearly as the EPM 4600 unit s disconnecting mechanism. 3.18in 80.6mm 4.36in 110.6mm 0.81in 20.5mm 7.62in 193.5mm EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE 5
8 CHAPTER 1: MECHANICAL INSTALLATION 6 EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE
9 EPM 4600 Multi-feed Power and Energy Metering Solution Chapter 2: Electronic Installation Electronic Installation Electronic Installation All Primary and Secondary circuits can, at times, produce lethal voltages and currents. Avoid contact with any current-carrying surfaces. The current inputs are only to be connected to external current transfomers (CTs). EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE 7
10 CHAPTER 2: ELECTRONIC INSTALLATION SERVICES: WYE, 4 WIRE. CONNECTION TYPE: Direct Voltage, CTs 3 N 1 2 LINE C B A N CT Shorting Block I1-LO I1-HI I2-LO I2-HI I3-LO I3-HI Earth Ground Only one 3 phase circuit is shown. Duplicate for additional circuits. C FUSES 3 x 0.1A Earth Ground B A N FUSE 3A L(+) N(-) Power Supply Connection LOAD Service: Three Phase, 4-Wire WYE Service Direct Voltage and 3 CT Connection for Metering 8 Three Phase Loads: EPM 4600-T All CTs must have one side grounded to reduce shock hazard. GE Digital Energy highly recommends using shorting blocks so that the meter can be removed from service while the CT is energized. 8 EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE
11 CHAPTER 2: ELECTRONIC INSTALLATION SERVICES: WYE, 4 WIRE. 3 CONNECTION TYPE: 3PTs, CTs N 1 2 LINE C B A N CT Shorting Block I1-LO I1-HI I2-LO I2-HI I3-LO I3-HI Earth Ground Only one 3 phase circuit is shown. Duplicate for additional circuits. C FUSES 3 x 0.1A Earth Ground B A N FUSE 3A Earth Ground L(+) N(-) Power Supply Connection LOAD Service: Three Phase, 4-Wire WYE Service with 3 PT Voltage and 3 CT Connection for Metering 8 Three Phase Loads - EPM 4600-T All CTs must have one side grounded to reduce shock hazard. GE Digital Energy highly recommends using shorting blocks so that the meter can be removed from service while the CT is energized. EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE 9
12 CHAPTER 2: ELECTRONIC INSTALLATION SERVICES: SINGLE PHASE, 2-WIRE CONNECTION TYPE: Direct Voltage, CTs N 1 LINE VL N CT Shorting Block I1-LO I1-HI I2-LO I2-HI I3-LO I3-HI Earth Ground Only three circuits are shown. Duplicate for additional circuits. Earth Ground VL N Short Voltage inputs together FUSE 3A L(+) N(-) Power Supply Connection LOADS Service: Single Phase, 2-Wire Service with Direct Voltage and 1 CT Connection for Metering 24 Single Phase Loads: EPM 4600-S All CTs must have one side grounded to reduce shock hazard. GE Digital Energy highly recommends using shorting blocks so that the meter can be removed from service while the CT is energized. 10 EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE
13 CHAPTER 2: ELECTRONIC INSTALLATION SERVICE: SINGLE PHASE, 3-WIRE CONNECTION TYPE: Direct Voltage, CTs To monitor 24 individual loads. See accuracy table for limiting factors. N 2 1 LINE VL1 VL2 N CT Shorting Block Run lines VL1 and VL2 through the CT in opposite directions Set PT ratio to half in the meter. VL2 VL1 I1-LO I1-HI I2-LO I2-HI I3-LO I3-HI Earth Ground Only one circuit is shown. Duplicate for additional circuits. Earth Ground VL1 FUSES 2 x 0.1A Short Voltage inputs together FUSE 3A VL2 L(+) N(-) Power Supply Connection LOADS Service: Single Phase, 3-Wire Service with Direct Voltage and 1 CT Connection for Metering 24 Single Phase Loads - EPM 4600-S All CTs must have one side grounded to reduce shock hazard. GE Digital Energy highly recommends using shorting blocks so that the meter can be removed from service while the CT is energized. EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE 11
14 CHAPTER 2: ELECTRONIC INSTALLATION 12 EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE
15 EPM 4600 Multi-feed Power and Energy Metering Solution Chapter 3: Metering System Configuration Metering System Configuration Connecting the EPM 4600 To configure the EPM 4600 Metering System: 1. Connect to the EPM 4600 unit through its USB port: Use a USB Type A to B plug to connect from your PC s USB port to the EPM 4600 unit s USB port. If your PC doesn t automatically find the USB driver, download it from the product CD that came with the EPM 4600 unit (see Chapter 11 in the EPM 4600 Metering System Installation and Operation Manual on the CD). NOTE: The EPM 4600 Quickstart guide shows connection using the USB port. For Ethernet/Wifi or RS485 connection, see the EPM 4600 Instruction Manual. EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE 13
16 CHAPTER 3: METERING SYSTEM CONFIGURATION USB Port 2. Open GE Communicator software (download from product CD). 3. Click Connect on the tool bar. You will see the Connect screen, shown on the right. Make sure the Address, Baud Rate, and Protocol settings match the ones here. 4. Click Connect - the Device Status screen confirms the connection; then click OK - the GE Communicator application s main screen opens. 14 EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE
17 CHAPTER 3: METERING SYSTEM CONFIGURATION Configuring the EPM Click the Profile button on the tool bar. The Device Profile screen opens. The Tree menu on the left side of the screen lets you choose setting screens. 2. Click System Settings to open one of the screens shown below. Use this screen to name the EPM 4600 unit (CPU) and to label the circuits (individual meters). You must give the EPM 4600 CPU an individual, unique name to properly download data to the database. EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE 15
18 CHAPTER 3: METERING SYSTEM CONFIGURATION 3. Click Communications (see instructions below). 4. Click CT, PT Ratios and System Hookup (see instructions below). 16 EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE
19 CHAPTER 3: METERING SYSTEM CONFIGURATION Communications Settings COM 1: RS485/ Ethernet/WIFI (optional) Address: 1-247; Baud Rate: 57600; Protocol: Modbus RTU/Modbus ASCII; EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE 17
20 CHAPTER 3: METERING SYSTEM CONFIGURATION Response Delay: 0-750ms; Parity: Odd, Even or None COM 2: USB port NOTE: The USB port settings are fixed. COM 3: RS485 Address: 1-247; Protocol: Modbus RTU/ASCII Baud Rate: 9600, 19200, 38400, Response Delay: 0-750ms NOTE: Click the (1)Default to Ethernet or (2)Default to Display button to set either the (1)Ethernet settings for COM1 or (2)Display settings for COM3, to their default values. CT, PT Ratios and System Hookup Note that the settings you see on the screen depend on your EPM 4600 unit s circuit configuration. The top screen is for an EPM 4600 unit with the single phase circuit configuration (EPM 4600-S). The bottom screen is for an EPM 4600 unit with the three phase circuit configuration (EPM 4600-T). For PT settings, see the EPM 4600 Metering System Instruction manual, on the enclosed CD. The CT settings are: CT Ratios CT Numerator (Primary): EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE
21 CHAPTER 3: METERING SYSTEM CONFIGURATION CT Denominator (Secondary): 10 or 2 Amps, depending on the EPM 4600 unit s ordered option (this field is display only). Updating the Device: To Update the EPM 4600: 1. When changes are complete, click the Update button to send a new profile to the EPM 4600 unit. 2. Click Cancel to Exit the screen. NOTE: For further details and additional programming screens, refer to the GE Communicator Software User Manual on the enclosed CD (access the software manual by clicking Help>Contents from the GE Communicator application s Title bar). EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE 19
22 CHAPTER 3: METERING SYSTEM CONFIGURATION 20 EPM 4600 POWER AND ENERGY METERING SOLUTION QUICKSTART GUIDE
Multilin EPM 4600 Metering Solution
GE Digital Energy Multilin EPM 4600 Metering Solution Multi-feed Power and Energy Metering Solution Quick Start Guide GE publication code: 1601-0297-A2 (GEK-119590A) 1601-0297-A2 Copyright 2014 GE Multilin
More informationDoc# E V.1.02 QS - 1
Mechanical Installation Recommended Tools for MP200 Unit Installation: #2 Phillips screwdriver; 1/4-inch (0.250 ) nut driver, socket, box, or open-end wrench; wire cutters. OTE: The MP200 unit is designed
More informationA1. Multilin EPM 4600 Meter Displays DIS3500/DIS5700. Quick Start Guide. GE Digital Energy
GE Digital Energy Multilin EPM 4600 Meter Displays DIS3500/DIS5700 Quick Start Guide Product version: 1.0x GE publication code: 1601-0500-A1 (GEK-119644) 1601-0500-A1 Copyright 2014 GE Multilin Inc. All
More informationMM300 Motor Management System Firmware Version 1.71 Update Release Notes
GE Grid Solutions MM300 Motor Management System Firmware Version 1.71 Update Release Notes GE Publication Number: GER-4827 Copyright 2018 GE Multilin Inc. Overview Summary GE Grid Solutions releases firmware
More informationInstruction Manual. Multilin TM 8 Series Retrofit Kit * A1* GE Grid Solutions LISTED
GE Grid Solutions Multilin TM 8 Series Retrofit Kit Instruction Manual 8 Series version: 1.6x GE publication code: 1601-0701-A1 (GEK-130906) LISTED *1601-0701-A1* Copyright 2016 GE Multilin Inc. All rights
More informationCopyright 2016 GE Multilin Inc. All rights reserved. EnerVista Integrator Quickstart Guide for version 8.0x. EnerVista, Integrator, POWER LEADER,
Copyright 2016 GE Multilin Inc. All rights reserved. EnerVista Integrator Quickstart Guide for version 8.0x. EnerVista, Integrator, POWER LEADER, Multilin, and GE Multilin are trademarks or registered
More informationMM300 Motor Management System
GE Grid Solutions MM300 Motor Management System Firmware Version 1.70 Update Release Notes GE Publication Number: GER-4783 Copyright 2017 GE Multilin Inc. Overview Summary GE Grid Solutions releases Firmware
More informationMultilin 650 Family. Firmware v7.60, Software v7.60 Release Note. GE Grid Solutions. Summary
GE Grid Solutions Multilin 650 Family Firmware v7.60, Software v7.60 Release Note Copyright 2017 GE Multilin Inc. Summary GE Grid Solutions issues the Multilin 650 Family Firmware version 7.60 and Enervista
More informationPanduit Basic Rack PDU
Panduit Basic Rack PDU User Manual Release 1.0 Issue 1.0 Copyright 2014 Panduit Corp. All rights reserved. No part of this book shall be reproduced, stored in a retrieval system, or transmitted by any
More informationPDU Branch Current Monitoring Board Installation and Configuration
PDU Branch Current Monitoring Board Installation and Configuration Inventory (1) (1) (3) (3) Note The branch current monitoring board can be installed only in a PDU with a serial number of XF0314 or higher.
More informationPanduit Basic Rack PDU with Local Meter
Panduit Basic Rack PDU with Local Meter User Manual Release 1.0 Issue 1.0 Copyright 2014 Panduit Corp. All rights reserved. No part of this book shall be reproduced, stored in a retrieval system, or transmitted
More informationPowerLogic ION7300 Series
PowerLogic ION7300 Series Power and Energy Meter Advanced Field Retrofit Instructions August 2006 Danger This symbol indicates the presence of dangerous voltage within and outside the product enclosure
More informationPowerLogic High Density Metering System 1-Meter Enclosure
PowerLogic High Density Metering System 1-Meter Enclosure Installation Guide 63230-508-211A1 Safety information PowerLogic High Density Metering System 1-Meter Enclosure Important information Read these
More informationCommunications guide. Line Distance Protection System * F1* GE Digital Energy. Title page
Title page GE Digital Energy D90 Plus Line Distance Protection System Communications guide D90 Plus firmware revision:.9x GE publication code: 60-9070-F (GEK-3469) GE Digital Energy 650 Markland Street
More informationMultilin EPM 6010 YEAR. GE Grid Solutions. Building Automation Power Meter with BacNET /IP Communications. Monitoring & Metering
GE Grid Solutions Multilin EPM 6010 Building Automation Power Meter with BacNET /IP Communications The Multilin EPM 6010 is an industry leading revenue grade power meter with native BACnet/ IP communications.
More informationHID. GE Consumer & Industrial Multilin. High Impedance Differential Module Instruction manual GEK Copyright 2005 GE Multilin
g GE Consumer & Industrial Multilin HID High Impedance Differential Module Instruction manual GEK-113064 Copyright 2005 GE Multilin GE Multilin 215 Anderson Avenue L6E 1B3 Markham, ON -CANADA T (905) 294
More informationInstallation Instructions & User Manual
Installation Instructions & User Manual ZONEMASTER PRO AC Panel Transient Voltage Surge Suppressors The Wiremold Company In US: 60 Woodlawn Street, West Hartford, CT 06110 800-621-0049 FAX 860-232-2062
More informationTraceTek Leak Detection Master Module Installation Instructions TOOLS REQUIRED STORAGE
TTDM-128 TraceTek Leak Detection Master Module Installation Instructions TRACETEK APPROVALS AND CERTIFICATIONS TYPE NM General Signaling Equipment 76LJ GENERAL INFORMATION Please read these instructions
More informationMultiVOIP SIP Gateways
MultiVOIP SIP Gateways MultiVOIP Analog Models MultiVOIP SS Models MultiVOIP FX Models Cabling Guide Copyright and Technical Support Cabling Guide MultiVOIP SIP Gateway MultiVOIP FX Models MVP210-FX, MVP410-FX
More informationTRC-190 User s Manual
First Edition, November 2008 www.moxa.com/product 2008 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. The software described in this manual is furnished under a license agreement
More informationInstalling the Cisco AS5400XM Universal Gateway
CHAPTER 3 Installing the Cisco AS5400XM Universal Gateway This chapter guides you through the installation of the Cisco AS5400XM universal gateway and includes the following sections: Setting Up the Chassis,
More informationMultilin EPM Energy and Demand Submeter with Wi-Fi. Monitoring & Metering. Communications. Key Benefits. Applications
Multilin EPM 6100 Energy and Demand Submeter with Wi-Fi The EPM 6100 is a powerful tool that allows customers to monitor and manage their energy usage within factories, businesses and across campuses.
More information3300 ACM. Installation & Operation Manual. Economical Digital Power Meter/Transducer CONTENTS
3300 ACM Economical Digital Power Meter/Transducer Installation & Operation Manual CONTENTS Danger During normal operation of this device, hazardous voltages are present which can cause severe injury or
More informationSEM3 - Embedded Micro Metering Module
SEM - Embedded Micro Metering Module Quick Reference Guide and Installation Instructions Scan QR Code for more information usa.siemens.com/sem Installation! DANGER Hazardous Voltage. Will cause death or
More informationHydroGuard 4 to 20 ma Output Module. For use with HydroGuard Water Quality Monitor and Controller
HydroGuard 4 to 20 ma Output Module For use with HydroGuard Water Quality Monitor and Controller Technician's Manual Installation, Operation, and Maintenance Guide Chapter 1: Preface... 3 1.1 Intended
More informationPower Monitor / Power Monitor 51A. Quick guide to set up a connection with the Power Monitor devices through the Weidmüller Serial/Ethernet Converter
Power Monitor / Power Monitor 51A Quick guide to set up a connection with the Power Monitor devices through the Weidmüller Serial/Ethernet Converter 1.1 Revision history Version Date Change 0.0 11/2013
More informationAcquiSuite Ally 12 & 48 Advanced Multi-Circuit Meter
AcquiSuite Ally 12 & 48 Advanced Multi-Circuit Meter Install Guide Revision C (12/18) DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Revision C (12/18) Turn off all power supplying equipment
More informationEnerSure Installation Guide
EnerSure Installation Guide Danger!!! The electrical components of this system may contain voltage and /or amperage sufficient to injure or kill. Installation is only to be performed by a licensed, bonded
More informationOptical Multiplexer. Quick Start Guide
Optical Multiplexer Quick Start Guide Part Number: 07M1195-QS, Rev. A Revised: February 12, 2009 Sales Office: +1 (301) 975-1000 Technical Support: +1 (301) 975-1007 E-mail: support@patton.com WWW: www.patton.com
More informationEPM g Energy. Multilin BUILDING AUTOMATION POWER METER. BACnet /IP Communications and Energy Measurement KEY BENEFITS APPLICATIONS FEATURES
Multilin EPM 6010 BUILDING AUTOMATION POWER METER BACnet /IP Communications and Energy Measurement KEY BENEFITS Rapid integration into BACnet management systems High accuracy multifunction power meter,
More informationTRC-190 User s Manual
User s Manual Edition 3.2, May 2017 www.moxa.com/product 2017 Moxa Inc. All rights reserved. User s Manual The software described in this manual is furnished under a license agreement and may be used only
More informationC30. Controller System. Instruction Manual AF2. GE Grid Solutions. Product version: 7.6x GE publication code: AF2 (GEK A)
GE Grid Solutions C30 Controller System Instruction Manual Product version: 7.6x GE publication code: 1601-0088-AF2 (GEK-130993A) E83849 LISTED IND.CONT. EQ. 52TL 1601-0088-AF2 Copyright 2017 GE Multilin
More informationInstruction Manual: IM E
Innovative Technology TVSS Products The I.T. Equalizer Installation Instruction Manual: IM01005011E Rev. 2 May 2009 Contents Page 1 Introduction... 1 1.1 Scope... 1 1.2 I.T. Equalizer Catalog Numbering
More informationMU110-6U. Analog output module 6 channel. User guide
MU110-6U Analog output module 6 channel User guide MU110-6U_2016.12_0221_EN All rights reserved Subject to technical changes and misprints akytec GmbH Vahrenwalder Str. 269 A 30179 Hannover Тел.: +49 (0)
More informationG5 PDU Installation Guide
G5 PDU Installation Guide 1 Contents Before You Begin... 3 Overview... 3 Important Safety Information... 3 Required Tools... 5 Section 1 Introduction... 6 Classification Overview... 6 Features... 7 Form
More informationNGC-40-BRIDGE. Control and Monitoring Modules for use with the nvent Raychem NGC-40 System Installation Instructions
NGC-40-BRIDGE Control and Moniting s f use with the nvent Raychem NGC-40 System Installation Instructions B C D A DESCRIPTION The nvent RAYCHEM NGC-40-BRIDGE module provides the interface between a panel's
More informationChecker is the sensor. CheckMate is the software that runs on your PC. You use CheckMate to set up Checker mm mm 4.
Quick Reference About Checker Checker is the sensor. CheckMate is the software that runs on your PC. You use CheckMate to set up Checker. Minimum PC Requirements Microsoft Windows 2000 or Windows XP 400MHz
More informationPowerLogic ION7300 series Power and energy meter
70002-0198-08 06/2010 PowerLogic ION7300 series Power and energy meter Installation guide Danger This symbol indicates the presence of dangerous voltage within and outside the product enclosure that may
More informationNGC-40-BRIDGE CONTROL AND MONITORING MODULES FOR USE WITH THE RAYCHEM NGC-40 SYSTEM INSTALLATION INSTRUCTIONS
NGC-40-BRIDGE CONTROL AND MONITORG MODULES FOR USE WITH THE RAYCHEM NGC-40 SYSTEM STALLATION STRUCTIONS B C D APPROVALS A Shown not to scale Hazardous Locations Class I, Div. 2, Groups A,B,C,D T4 Class
More informationCisco CRS 3-Phase AC Power Distribution Unit Installation Guide 2. Cisco CRS 3-Phase AC Power Distribution Unit 2
Cisco CRS 3-Phase AC Power Distribution Unit Installation Guide Cisco CRS 3-Phase AC Power Distribution Unit Installation Guide 2 Cisco CRS 3-Phase AC Power Distribution Unit 2 Revised: November 18, 2016,
More informationTRP-C08M. USB To 4 RS232/422/485 Isolated Converter. User s Manual. Printed Jun Rev 1.0
TRP-C08M USB To 4 RS232/422/485 Isolated Converter User s Manual Printed Jun. 2013 Rev 1.0 Trycom Technology Co., Ltd 1F, No.2-11, Sihu street, Yingge Township, Taipei, Taiwan ROC Tel: 886-2-86781191,
More informationTRP-C08. USB to RS232/422/485 Isolated Converter. User s Manual. Printed Sep.2014 Rev 1.4
TRP-C08 USB to RS232/422/485 Isolated Converter User s Manual Printed Sep.2014 Rev 1.4 Trycom Technology Co.,Ltd No.35, Zhongxing Rd., Guishan Township, Taoyuan County 333, Taiwan. Tel : 886-3-350-3351
More informationPower Xpert Meter 2000 Gateway Card Kit
Quick Start Guide IL02601011E PXM 2250 PXM 2260 IQ 250 IQ 260 Power Xpert Meter 2000 Gateway Card Kit Table of Contents Remove the Meter From Service.... 2 Disconnect Power Connections, CTs, and Modbus....
More informationINTEGRATED SYSTEMS AND CONTROL, INC. User s Hardware Manual. PCMNET V 7. xx
INTEGRATED SYSTEMS AND CONTROL, INC. User s Hardware Manual PCMNET V 7. xx INTEGRATED SYSTEMS AND CONTROLS, INC. PCMNET Users Manual Revised 2/4/2005 2003-2005 Integrated Systems and Control. Inc. PO Box
More informationDTS 310. DIN Rail Mounted, Indoor Rated Revenue Grade Electrical Sub-meter. Page 1. Measurlogic MQ A
DTS 310 DIN Rail Mounted, Indoor Rated Revenue Grade Electrical Sub-meter Page 1 1 PRODUCT OVERVIEW... 3 1.1 SUPPLIED ITEMS... 3 1.2 DOCUMENT CONVENTIONS... 4 1.3 PRODUCT SPECIFICATION... 4 1.3.1 Current
More informationPower Xpert Meter 2000 Gateway Card Kit
Quick Start Guide IL02601011E Rev. 2 December 2011 PXM 2250 PXM 2260 IQ 250 IQ 260 Power Xpert Meter 2000 Gateway Card Kit Table of Contents Remove the Meter From Service.... 2 Disconnect Power Connections,
More informationPower Xpert Meter 2000 Gateway Card Kit
Quick Start Guide IL02601011E PXM 2250 PXM 2260 IQ 250 IQ 260 Power Xpert Meter 2000 Gateway Card Kit Table of Contents Remove the Meter From Service... 2 Disconnect Power Connections, CTs, and Modbus....
More informationGeneral Specifications. P2-SCM Serial Communications
General Specifications Module Type Intelligent Modules per Base I/O Points Used Field Wiring Connector Operating Temperature Storage Temperature Humidity Environmental Air Vibration Shock Field to Logic
More informationEnerVista 489 Setup Software
GE Digital Energy EnerVista 489 Setup Software Version 4.02 elease Notes GE Publication Number: GE-4381 Copyright 2010 GE Multilin Summary Overview GE Multilin releases the EnerVista 489 Setup software
More informationOilCop Component Wiring Installation Manual
OilCop Component Wiring Installation Manual This info sheet contains important information. READ AND KEEP FOR REFERENCE. 2311 S. Edwards Wichita, KS 67213 TEL: 316-943-5477 FAX: 316-943-4760 TOLL FREE:
More informationGE Grid Solutions. Instruction Manual. GE Energy Aggregator revision: 4.2 GE publication code: GEK Manual Part Number: A1
GE Grid Solutions Instruction Manual GE Energy Aggregator revision: 4.2 GE publication code: GEK-119642 Manual Part Number: 1601-0501-A1 1601-0501-A1 Copyright 2017 GE Multilin Inc. All rights reserved.
More informationRS232C/RS485 Data can be easily monitored by LAN
KS SIGNAL CVERTER (AKS) RSC/RS8 Data can be easily monitored by LAN KS SIGNAL CVERTER FEATURES The connectors are located on the front panel. Easy to connect Easy to operate Can be connected to the LAN
More informationEM QUICK START GUIDE. Quick Start Guide EM BG0504 REV.A2
Quick Start Guide EM132-133 Mechanical Installation Figure 1: Instrument Dimensions 2 Mechanical Installation Figure 2: Mounting the EM133 on DIN Rail or on flat surface IMPORTANT! Only qualified personnel
More informationTRP-C08 User s Manual
TRP-C08 User s Manual USB To RS232/422/485 Optical Isolated Converter Printed Aug. 2005 Rev 1.0 Trycom Technology Co., Ltd 1F, No.2-11, Sihu Street, Yingge Township, Taipei, Taiwan ROC Tel: 886-2-86781191,
More informationUSP-070-B08 USP-104-B10, USP-104-M10 USP-156-B10
UniStream HMI Panel Installation Guide USP-070-B10, USP-070-B08 USP-104-B10, USP-104-M10 USP-156-B10 Unitronics UniStream platform comprises control devices that provide robust, flexible solutions for
More informationH704-42(H)(E), H704-42/1(H)(E)
POWER MONITORING INSTALLATION GUIDE H704-42(H)(E), H704-42/1(H)(E) Branch Current Monitor DANGER NOTICE Installer's Specifications General: Operating Temp. Range 0 to 60 C (32 to 140 F) (
More informationP3-SCM. General Specifications
General Specifications Module Type Modules per Base Modules per Group I/O Points Used Field Wiring Connector Operating Temperature Storage Temperature Humidity Environmental Air Vibration Shock Field to
More informationQuick Start. This document describes how to install the Juniper Networks PTX5000 Packet Transport
PTX5000 Packet Transport Router Quick Start September 2017 Part Number: 530-066788 Revision 01 This document describes how to install the Juniper Networks PTX5000 Packet Transport Router. Contents Quick
More informationInstallation RA5112-C-16A-C20. Basic Rack Power Distribution Unit
Installation RA5112-C-16A-C20 Basic Rack Power Distribution Unit Contents Before You Begin........................1 Safety and grounding information..........1 How to Install the Rack PDU...............2
More informationAD-8923-BCD. Remote Controller (BCD) INSTRUCTION MANUAL 1WMPD
AD-8923-BCD Remote Controller (BCD) INSTRUCTION MANUAL 1WMPD4002137 2010 A&D Company, Limited. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated
More informationALPHA Plus and A3 ALPHA Switchboard Meters with the CPS Power Supply
October 2012 IL42-4031C ALPHA Plus and A3 ALPHA Switchboard Meters with the CPS Power Supply General This leaflet contains general installation instructions for ALPHA Plus and A3 ALPHA meters with the
More informationAC Power Meter GPM-8212 USER MANUAL
AC Power Meter GPM-8212 GW INSTEK PART NO. 82PM-82120MB This manual contains proprietary information, which is protected by copyrights. All rights are reserved. No part of this manual may be photocopied,
More informationInfinity 1U 19 Converter Shelf Models: J L217 - Individual +24V Inputs Bulk -48V Output L218 - Individual -48V Input Bulk+24V Output
GE Critical Power Quick Start Guide Infinity 1U 19 Converter Shelf Models: J5964803 L217 - Individual +24V Inputs Bulk -48V Output L218 - Individual -48V Input Bulk+24V Output Edge Controller This shelf
More informationSmartZone Gateway- Enabled M Series Rack PDU
SmartZone Gateway- Enabled M Series Rack PDU User Manual Release 1.0 Issue 1.0 Copyright 2014 Panduit Corp. All rights reserved. No part of this book shall be reproduced, stored in a retrieval system,
More informationICPDAS FSM-510G Series Ethernet Management Switch Quick Start
ICPDAS FSM-510G Series Ethernet Management Switch Quick Start Version 1.0, Dec 2014 Overview The Management Ethernet Switch solutions are designed for supporting standard industrial applications. Managed
More information3700 SERIES USER MANUAL
SAFETY GUIDE This manual contains the precautions necessary to ensure your personal safety as well as for protection for the products and the connected equipment. These precautions are highlighted with
More informationRS-FX-N01 wind transmitter user's Guide (485type)
RS-FX-N01 wind transmitter user's Guide (485type) Issue:. V1. 0 1 2 Context 1. Introduction...4 2. Installation instructions... 5 3. Configure the software installation and use...7 4. Communication Protocol...
More informationGE Multilin technical note
GE Digital Energy Multilin GE Multilin technical note Synchronizing multiple buses using common voltage measurements GE publication number: GET-8532 Copyright 2009 GE Multilin Synchronizing multiple buses
More informationModel 2380 Rack-Mount Kit
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley Model 2380 Rack-Mount Kit Installation Instructions Introduction The Model 2380 Fixed Rack-Mount
More informationAPPENDIX B SERIAL I/O MODULE INSTALLATION / OPERATION WHEN USING T&D VER. 5.2 OR 5.3
SERIAL I/O MODULE INSTALLATION / OPERATION WHEN USING T&D VER. 5.2 OR 5.3 APPENDIX B In This Appendix... H2 SERIO(-4) Overview................................B 2 Specifications........................................B
More informationWiring Section 3-3. NQ-Series communication ports support various types of (serial) communication.
3-3 Wiring NQ-Series models have, besides one power connector, a number of communication ports. Please refer to Table 2.2: Common specifications for NQ-Series and Table 2.3: Specifications per NQ-Series
More informationUser s Manual Printed Sep Rev 1.2
TRP-C08M USB To 4 RS232/422/485 Isolated Converter User s Manual Printed Sep. 2014 Rev 1.2 Trycom Technology Co.,Ltd No.35, Zhongxing Rd., Guishan Township, Taoyuan County 333, Taiwan. Tel : 886-3-350-3351
More informationHigh Power over Ethernet Midspans PD Port Model PD Port Model
Data and Power on a Single Line High Power over Ethernet Midspans PD-8006-6 Port Model PD-8012-12 Port Model User Guide Notice The information contained herein is believed to be accurate and reliable at
More informationFA-2448 SIX POSITION Filter Wheel
15 Discovery Way, Acton, MA 01720 Phone: (978)263-3584, Fax: (978)263-5086 Web Site: www.acton-research.com Operating Instructions Acton Research Corporation FA-2448 SIX POSITION Filter Wheel Rev. 3.05.17
More informationVersion 7.7x Release Notes
GE Grid Solutions UR Family Version 7.7x Release Notes GE Publication Number: GER-4834A opyright 2018 GE Multilin Inc. Overview This document contains the release notes for firmware and software versions
More informationTechnical Specifications. Dual Source kwh Energy Meter
Technical Specifications of Dual Source kwh Energy Meter (SPKG300) Class 0.5S Sai PowerrZerve 29/3B, Rajalakshmi Nagar, 1 st Main Road, Velachery Bye Pass, Chennai 600 042. Website :www.spowerz.com Email
More informationVersion 7.6x Release Notes
E rid Solutions UR Family Version 7.6x Release Notes E Publication Number: ER-4799A opyright 2017 E Multilin Inc. Overview This document contains the release notes for firmware and software versions 7.60
More informationThe power behind competitiveness. Delta Infrasuite Power Management. Power Distribution Unit. User Manual.
The power behind competitiveness Delta Infrasuite Power Management Power Distribution Unit User Manual www.deltapowersolutions.com Save This Manual This manual contains important instructions and warnings
More informationDM3058/DM3058E Digital Multimeter
Quick Guide RIGOL Publication number QGA03109-1110 Feb. 2014 DM3058/DM3058E Digital Multimeter 2008 RIGOL Technologies, Inc. All Rights Reserved Copyright 2008 RIGOL Technologies, Inc. All Rights Reserved.
More informationMulti Unit Enclosed Meter
Contents Description Page Introduction Preliminary comments and safety precautions............................... 2 Warranty and liability information................ 2 Safety precautions..............................
More informationTRP-C08S. USB To 1* RS232 and 1*RS422/485 Isolated Converter. User s Manual. Printed Jun Rev 1.2
TRP-C08S USB To 1* RS232 and 1*RS422/485 Isolated Converter User s Manual Printed Jun. 2007 Rev 1.2 Trycom Technology Co., Ltd 1F, No.2-11, Sihu street, Yingge Township, Taipei, Taiwan ROC Tel: 886-2-86781191,
More informationConfigurable Output Distribution. 120V / 208V / 240V 60Hz. User Manual English
Configurable Output Distribution 120V / 208V / 240V 60Hz User Manual English TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS.......................... 1 GLOSSARY OF SYMBOLS....................................
More informationRGM180 Display Series
Quick Start Guide RGM180 Display Series BG0509 REV.A2 RGM180 QUICKSTART LIMITED WARRANTY The manufacturer offers the customer a 24-month functional warranty on the instrument for faulty workmanship or
More informationTechnical Specificaions. kwh Energy Meter
Technical Specificaions of kwh Energy Meter (SPK301) Class 1.0S Sai PowerrZerve 29/3B, Rajalakshmi Nagar, 1 st Main Road, Velachery Bye Pass, Chennai 600 042. Website :www.spowerz.com Email : info@spowerz.com
More informationModels beginning with 2M, 2L or 2X. Product Description. Technical Specifications. Installation Instructions. Series 2000 Multiple Meter Units (MMUs)
Models beginning with 2M, 2L or 2X Series 2000 Multiple Meter Units (MMUs) Product Description Technical Specifications Installation Instructions February 28 th, 2013 List of Figures...2 List of Tables...2
More informationLVN5200A-R2, rev. 1, Hardware Installation Guide
LVN5200A-R2 LVN5250A-R2 LVN5200A-R2, rev. 1, Hardware Installation Guide Customer Support Information Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support
More information469 Motor Management Relay
GE Digital Energy 469 Motor Management Relay GE Digital Energy 650 Markland Street Markham, Ontario Canada L6C 0M1 TELEPHONE: Worldwide +1 905 927 7070 Europe/Middle East Africa +34 94 485 88 54 North
More informationRemote RMM-1400 Intelligent Remote Site Management Device. Installation Guide
Remote RMM-1400 Intelligent Remote Site Management Device Guide INSTALLATION GUIDE Westell Technologies Part # 030-300645 Rev. A Copyright 2015 by Westell Technologies. All Rights Reserved. Westell, Kentrox
More informationFSM-510G Series Ethernet Management Switch Quick Start Guide
FSM-510G Series Ethernet Management Switch Quick Start Guide Overview The Management Ethernet Switch solutions are designed for supporting standard industrial applications. Managed switches are easily
More informationPM Series Power Meter
PM Series Power Meter Quick Setup Guide - PMC-1000, PMC- 1001, PMM-1000, PMB-1960 Safety Information DANGER! HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Follow safe electrical work practices. See
More information3710 ACM 3750 PDC 3800 RTU. ISOCOM Communications Card Retrofit Instructions
3710 ACM 3750 PDC 3800 RTU ISOCOM Communications Card Retrofit Instructions Danger During normal operation of this device, hazardous voltages are present which can cause severe injury or death. These
More informationModel 2380 Rack-Mount Kit
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley Model 2380 Rack-Mount Kit Installation Instructions Introduction The Model 2380 Fixed Rack-Mount
More informationAI130 AIswitch Series 130 Chassis Installation Guide
AI130 AIswitch Series 130 Chassis Installation Guide Part Number QR-130 Rev 3 2007 by Kentrox, Inc. All rights reserved. Copyright 2007 by Kentrox, Inc. All Rights Reserved. The material discussed in this
More informationQUICK SETUP GUIDE PMC-1000, PMC-1001, PMM-1000, PMB PM Series Power Meter. Safety Information. Equipment Maintenance and Service.
PM Series Power Meter QUICK SETUP GUIDE PMC-1000, PMC-1001, PMM-1000, PMB-1960 Safety Information DANGER! HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Follow safe electrical work practices. See NFPA
More informationSimple but elegant look and ease of installation make it ideal for various industrial applications.
This LDD240-WU DC/DC converter is the optimal response to the applications where compactness and high reliability are requested. It is isolated and offers a wide range of input and output voltages. Simple
More informationSmartMod DC Digital Input Module HE359DIM610 12/24VDC Negative Logic
MAN0842-02 DIM610 PAGE 1 of 6 SmartMod DC Digital Input Module HE359DIM610 12/24VDC Negative Logic 1 SPECIFICATIONS Number of Channels Input Ranges DIM610 12 PLC Update Rate 12/24 VDC Terminal Type DIM610
More informationHPE Intelligent Power Distribution Unit Installation Instructions
HPE Intelligent Power Distribution Unit Installation Instructions Important safety information For important safety, environmental, and regulatory information, see Safety and Compliance Information for
More informationEM-1000 /EM-2000/ EM-3000 Series Multifunction Power and Energy Meters
Power and Energy Meters Code No. LIT-1900845 Issued December 4, 2013 EM-1000 /EM-2000/ EM-3000 Series Multifunction Power and Energy Meters EM-1000 Series Meter Description The EM-1000 Series monitor is
More informationConnecting Power and Ground
This chapter explains how to connect the power and ground for NCS 2006 shelf. The sections are: Power and Ground Description, page 1 NTP-L12 Installing Power and Ground to the NCS 2006 Shelf, page 2 Power
More informationMultilin EPM 7000/7000T Power Quality Meter
GE Grid Solutions Multilin EPM 7000/7000T Power Quality Meter Instruction Manual Software Revision:.0 Manual P/N: 60-0266-A5 Manual Order Code: GEK-3584D LISTED *60-0266-A5* Copyright 206 GE Multilin Inc.
More information