1N47- Series DO-41. Mechanical Data. Page <1> 18/07/08 V1.1
|
|
|
- Bennett Cobb
- 6 years ago
- Views:
Transcription
1 Features: Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Typical I R less than 5.0µA above 11V. High temperature soldering guaranteed: 260 C/10 seconds at terminals Plastic package has underwriters laboratory flammability classification 94V-0 DO-41 Dimensions : Inches (Millimetres) Mechanical Data Case : Moulded plastic DO-41. Lead : Pure tin plated lead free, solderable per MIL-STD-202, Method Polarity : Color band denotes cathode end. Mounting position : Any. Weight : ounces, 0.3 gram. Page <1> 18/07/08 V1.1
2 Maximum Ratings and Electrical Characteristics Rating at 25 C Ambient Temperature Unless Otherwise Specified. Type Number Symbol Value Units Peak Power Dissipation at T A = 50 C, Derate above 50 C (Note 1) Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 2) P D Watts mw/ C I FSM 10.0 Amps Operating and Storage Temperature Range T J, T STG -55 to +150 C Notes : 1. Mounted on 5.0mm 2 (0.013mm thick) land areas. 2. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. Electrical Characteristics (T A = 25 C Unless Otherwise Noted) V F = 1.2V maximum, I F = 200mA for all types. Power (Watt) Nom. (Notes 2 & 3) Zener Voltage V Z at I ZT Voltage Test Current I ZT ma Maximum Zener Impedance (Note 4) Z Z ZT at ZK at I ZK I ZT Minimum Maximum Ohms Ohms ma Leakage Current I V R ua Maximum Volts Surge Current at T A = 25 C I r = ma (Note 5) Part Number N4742A N4743A N4744A N4745A N4746A N4747A N4748A N4749A N4750A N4751A N4752A N4753A N4756A N4757A N4758A N4760A N4761A N4764A Page <2> 18/07/08 V1.1
3 Notes 1: Tolerance and Type Number Designation. The type numbers listed have a standard tolerance on the nominal zener voltage of ±5%. 2. Specials Available Include: A. Nominal zener voltages between the voltages shown and tighter voltage tolerances. B. Matched sets. 3. Zener Voltage (VZ) Measurement. Guarantees the zener voltage when messured at 90 seconds while maintaining the lead temperature (TL) at 30oC± 1oC, from the diode body. 4. Zener Impedance (ZZ) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results when an accurrent having and rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed on IZT or IZK. 5. Surge Current (Ir) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration; however, actual device capability is as described. Ratings and Characteristics Curves ( 1N4742A thru 1N4753A, 1N4756A thru 1N4758A, 1N4760A, 1N4761A and 1N4764A Power Temperature Derating Curve Typical Forward Characteristics P D, Maximum Pwer Dissipation (watts) Ambient Temperature ( C) I F - Forward Current (ma) V F - Forward Voltage (Volts) Effect of Zener Current on Zener Impedance Effect of Zener Voltage on Zener Impedance Z Z - Dynamic Impedance (Ohms) Z Z - Dynamic Impedance (Ohms) I Z - Zener Current (ma) I Z - Zener Current (ma) Page <3> 18/07/08 V1.1
4 Typical Leakage Current Typical Capacitance verses Vz C - Capacitance (pf) I R, Leakage Current (µa) V Z - Forward Voltage (Volts) V Z, Nominal Zener Voltage (Volts) Temperature Coefficients a - Range for Units to 12 Volts Temperature Coefficients b - Range for Units to 12 to 100 Volts θv Z, Temperature Coefficient (mv/ C) V Z, Zener Voltage (Volts) θv Z, Temperature Coefficient (mv/ C) V Z, Zener Voltage (Volts) Page <4> 18/07/08 V1.1
5 Effect of Zener Current Typical Thermal Resistance versus Lead Length θv Z, Temperature Coefficient (mv/ C) V Z, Zener Voltage (Volts) θ JL, Junction to Lead Thermal Resistance ( C/W) L, Lead Length to Heat Sink (Inches) Maximum Surge Power P Pk, Peak Surge Power Iwattso PW, Pulse Width (ms) Page <5> 18/07/08 V1.1
6 Notes: International Sales Offices: AUSTRALIA Farnell Tel No: Fax No: FINLAND Farnell Tel No: Fax No: ITALY Farnell Tel No: Fax No: SPAIN Farnell Tel No: Fax No: AUSTRIA Farnell Tel No: Fax No: FRANCE Farnell Tel No: Fax No: MALAYSIA Farnell-Newark Tel No: Fax No: SWEDEN Farnell Tel No: Fax No: BELGIUM Farnell Tel No: Fax No: GERMANY Farnell Tel No: Fax No: NETHERLANDS Farnell Tel No: Fax No: SWITZERLAND Farnell Tel No: Fax No: BRAZIL Farnell-Newark Tel No: Fax No: HONG KONG Farnell-Newark Tel No: Fax No: NEW ZEALAND Farnell Tel No: Fax No: UK Farnell Tel No: Fax No: CHINA Farnell-Newark Tel No: Fax No: HUNGARY - Farnell NORWAY Farnell Tel No: Fax No: UK CPC CZECH REPUBLIC - Farnell INDIA - Farnell PORTUGAL Farnell Tel No: Fax No: USA Newark Tel No: DENMARK Farnell Tel No: Fax No: IRELAND Farnell Tel No: Fax No: RUSSIA Farnell export EXPORT Farnell Tel No: Fax No: For enquiries from all other markets ESTONIA Farnell Tel No: Fax No: ISRAEL Farnell Tel No: Fax No: SINGAPORE Farnell-Newark Tel No: Fax No: Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. Premier Farnell plc Page <6> 18/07/08 V1.1
SF5x Series DO-201AD. Page <1> 26/07/08 V1.1. Dimensions : Inches (Millimetres)
Features: High efficiency, low V F. High current capability. High reliability. High surge current capability. Low power loss. For use in low voltage, high frequency inventor, free wheeling, and polarity
CM and SB Series Single Phase Bridge Rectifiers
Features: Electrically isolated metal case for maximum heat dissipation. Metal case with an electrically isolated mylar. Rating to 0 Volts PRV. Ampere surge capability. High efficiency. Mounting: Through
HMV Series Ceramic Cased Wirewound Resistors
Features: Especially designed for crowded PCB's. Ceramic stand-off's act as heatsink. Vertical mounting ceramic cased wirewound resistors. Physical Configuration Type Power Rating at 70 C W Dimensions
Voltage Regulator Example Ying Sun
Voltage Regulator Example Ying Sun Voltage Regulator Circuit Vin is 9V. We want to regulate Vout at 5V. We use a zener diode of 3.3 V as shown in the attached data sheet. 1) Determine R1. R1 provides the
Z1SMA4736A Z1SMA4757A
1W Surface Mount Zener Diodes Features For surface mounted applications in order to optimize board space Built-in strain relief Glass passivated junction Low inductance High temperature soldering guaranteed:
MCC SMA2EZ5.1D5 THRU SMA2EZ75D5. Features. 2 W Glass Passivated Junction Silicon Zener Diode Volts.
Features Mechanical Data TERMINALS : Solder plated, solderable per MIL-STD-7, method 6 POLARITY : Color band denotes positive end (cathode) omponents 76 Marilla Street Chatsworth!"# $%!"# Lead Free Finish/Rohs
MCC 2EZ5.1D5 THRU 2EZ75D5. Features Glass Passivation Junction. 2 W Glass Passivated Junction Silicon Zener Diode 5.
omponents 76 Marilla Street Chatsworth!"# $%!"# EZ.D THRU EZ7D Features Glass Passivation Junction Lead Free Finish/RoHS Compliant (Note C) ("P"Suffix designates Compliant. See ordering information) Excellent
SMA Series - Crimp Plug and Jack
Plug Features: SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance. These devices offer broadband performance with low reflection. These properties, along
MCC. Revision: /06/09 1N5338B THRU 1N5369B
Features Zener Voltage From 5.V to 5V Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 For Available Tolerances See Note Marking : Cathode band and type number Maximum Ratings:
2M6.8Z - 2M200Z Taiwan Semiconductor
2W, 6.8V - 200V Glass Passivated Junction Silicon Zener Diodes FEATURES - Glass passivated chip junction - Typical I R less than μa - Compliant to RoHS Directive 20/65/EU and in accordance to WEEE 2002/96/EC
SZAF5.1A~SZAF220A ZENER DIODE 1.5W
DESCRIPTION The are available in SMAF Package ORDERING INFORMATION Package Type Part Number SZAF5.1A SZAF36A SZAF5.6A SZAF39A SZAF6.2A SZAF43A SZAF6.8A SZAF47A SZAF7.5A SZAF51A SZAF8.2A SZAF56A SZAF9.1A
Surface Mount Silicon Zener Diodes
FEATURES CREAT BY ART - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Low inductance - Typical IR less than 0.5μA above 11V - ESD Rating of
Transient Voltage Suppressor
Features: Glass Passivated Junction Low Incremental Surge Resistance, Excellent Clamping Capability Low Profile Package With Built-In Strain Relief for Surface Mounted Applications 600W Peak Pulse Power
CZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free
CZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free Features - Glass passivated chip - Low leakage - Built-in strain relief - Low inductance - High peak reverse power
ACZRC5340B-G Thru. ACZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device
CZRC5340B-G Thru. CZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device Features - Glass passivated chip. - Low leakage. - Built-in strain relief. - Low inductance. - High peak reverse power
technický list 1N5333B through 1N5388B 5 Watt Surmetic 40 Silicon Zener Diodes TECHNICAL DATA str 1
Dodavatel: GM electronic, spol. s r.o., Křižíkova 77, 86 Praha 8 zákaznická linka: 84 6 7 technický list TECHNICAL DATA Watt Surmetic 4 Silicon Zener Diodes This is a complete series of Watt Zener Diodes
Silicon 5 Watt Zener Diodes
Compliant Silicon 5 Watt Zener Diodes DESCRIPTION The 1N5334Be3 through IN5388Be3 JEDEC registered series of axial-leaded 5.0 watt Zeners provides a voltage selection of 3.6 V to 200 V with different tolerances
ELECTROSÓN. 1N53 Series. 5 Watt Surmetic 40 Zener Voltage Regulators
5 Watt Surmetic 40 Zener Voltage Regulators This is a complete series of 5 Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon oxide
CHENMKO ENTERPRISE CO.,LTD
CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT ZENER SILICON PLANAR POWER ZENER DIODES VOLTAGE RANGE.V TO 9V MMPZBGP THRU MMPZBGP FEATURE * High temperature soldering type. * ESD rating of class (> kv) per human
MCC. Revision: E 2014/02/26 1N5338B THRU 1N5388B. Features. 5 Watt Zener Diode 5.1 to 200 Volts. Maximum Ratings:
Features Zener Voltage From 5.V to 00V Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level Lead Free Finish/RoHS Compliant (Note) ("P"Suffix designates Compliant. See ordering information)
1N5333B Series. 5 Watt Surmetic 40 Zener Voltage Regulators
Preferred Device Watt Surmetic 40 Zener Voltage Regulators This is a complete series of Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of
SEMICONDUCTOR GENERAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 0 mw DO-35 Glass Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP 0 Milliwatt Hermetically Sealed Glass Silicon Zener Diodes Specification
500mW 5% Zener Diodes
MMSZ522B - MMSZ5262B 500mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 20/65/EU and in
Transient Voltage Suppressor
Features: Optimized for LAN Protection Applications Low Profile Package With Built-In Strain Relief For Surface Mounted Applications Low Incremental Surge Resistance, Excellent Clamping Capability 400W
Continental Device India Limited
5W AXIAL LEAD ZENER DIODES Axial Lead Plastic Package Features 1). Silicon Planar Power Zener Diodes. 2). For use in Stabillizing and Clipping Circuits with High Power Rating. 3). Standard Zener Voltage
Surface Mountable PTC Resettable Fuse
Specifications: Applications : All high-density boards Product Features : Small surface mountable, Solid state, Faster time to trip than standard SMD devices, Lower resistance than standard SMD devices
TSZL52C2V4 thru TSZL52C39 Taiwan Semiconductor. SMD Zener Diode. Small Signal Product FEATURES MECHANICAL DATA
SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 39V - Designed for mounting on small surface - Extremely thin / leadless package - Packing code with suffix "G" means green compound
500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Surface mounting device (SMD) type Moisture sensitivity level: level, per J-STD-020
500mW 5% Zener Diodes
5mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 36V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 211/65/EU and in accordance to WEEE 22/96/EC
Fast Acting PTC Resettable Fuse SMD - Case Style 0603
Features: Compact design to save board space-0603 footprint. Small size results in very fast time to react to fault events. Low profile. Halogen free. Applications: USB port protection. PC motherboards
500mW, 2% Tolerance Zener Diodes
500mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 2% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-free
500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide Zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC
500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V V Z tolerance selection of ± 5% Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
500mW, 2% Tolerance SMD Zener Diode
500mW, 2% Tolerance SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 75V - Surface mount device type - Moisture sensitivity level - Pb free and RoHS compliant - V Z Tolerance Selection
1N4728A-G SERIES SILICON ZENER DIODE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS FEATURES MECHANICAL DATA
SILICON ZENER DIODE VOLTAGE 3.3 to 75 Volt POWER 1 Watt FEATURES Low inductance High temperature soldering : 260 C /10 seconds at terminals Glass package has Underwriters Laboratory Flammability Classification
BAT42W/BAT43W SURFACE MOUNT SCHOTTKY BARRIER DIODE
Features: Low Turn-on Voltage Fast Switching PN Junction Guard Ring Transient and ESD Protection Designed for Surface Mount Application Plastic Material UL Recognition Flammability Classification 94V-O
High Power Resistors HP03 Series
Features High power in standard size Suitable for both wave and reflow soldering Application: AV adapters, LCD back light, Camera strobe Shipped in reels of 5K Specification Table Type : MCHP03 Power Rating
500 mw SURFACE MOUNT ZENER DIODES
Available on commercial versions 0 mw SURFACE MOUNT ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The 1N4678UR-1 thru 1N4717UR-1 series of 0.5 watt glass surface mount DO-213AA
500 mw AXIAL-LEADED ZENER DIODES
Available on commercial versions 0 mw AXIAL-LEADED ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The series of 0.5 watt Zener voltage regulators provides a selection from 1.8
M3Z2V4~M3Z75V ZENER DIODES 200mW ZENER VOLTAGE REGULATORS
DESCRIPTION This series of Zener Diodes is packaged in a SOD-323 surface mount package that has a power dissipation of 200mW. They are designed to provide voltage regulation protection and are especially
Single-Phase 6.0A Glass Passivated Bridge Rectifier
0 Single-Phase 6.0A Glass Passivated Bridge Rectifier 0 Features D3K Glass passivated die construction Low forward voltage drop High current capability High surge current capability Designed for surface
200mW, 2% Tolerance Zener Diodes
200mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 3.6V to 36V V Z tolerance selection of ± 2% Moisture sensitivity level: level 1, per J-STD-020 Compliant to RoHS directive
BZD17C SERIES Taiwan Semiconductor
0.8W, 11V - 220V Voltage Regulator Diodes FEATURES - Silicon zener diodes - Low profile surface-mount package - Zener and surge current specification - Low leakage current - Excellent stability - Compliant
Zener Voltage Regulators
Zener Voltage Regulators 200 mw SOD 323 Surface Mount This series of Zener diodes is packaged in a SOD 323 surface mount package that has a power dissipation of 200 mw. They are designed to provide voltage
M C C. 1N5221 THRU 1N5267
omponents 736 Marilla Street Chatsworth!"# $%!"# N522 THRU N5267 Features Wide Voltage Range Available Glass Package High Temp Soldering: 260 C for Seconds At Terminals Marking : Cathode band and type
2 Anode. Parameter Symbol Value Units. Max Reverse Leakage Current V IZT IZT IZK VR Nom. V Min. V Max.
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4~33 Volt POWER 25 mwatt FEATURES.42(.5).37(.95) Planar Die construction 25mW Power Dissipation Zener Voltages from 2.4~ Ideally Suited for Automated Assembly
Molded plastic body over glass passivated junction Plated axial leads, solderable per MIL-STD-750, Method 2026
T6L Features Stand-off voltage from 5.0 to 250 volts Glass passivated junction 5000W Peak Pulse Power capability on 10/1000μs waveform repetition rate(duty cycle): 0.05% Fast response time: typically less
Power Metal Fixed Resistors
Type Designation: (EX.) The type designation shall be in the following form: Type Power Rating Resistance Tolerance Nominal Resistance MCPMR 2W-S J 100 KΩ Ratings: Ratings shall be shown in the table 1
Surface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
Thick Film Chip Resistor
Features: Small size and light weight. Highly reliable multilayer electrode construction. Compatible with all soldering process. Applications: Telecommunication equipments. Radio and tape recorders, TV
P6KE6.8A - 600CA. 600W Transient Voltage Suppressor. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) DO-15
Features Glass passivated chip junction 600W peak pulse power capability on 10/1000μs waveform repetition rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR Min. 600W
P1SMA5914-AU ~ 1SMA5945-AU Series
SILICON ZENER DIODE oltage 3.6~68 Power 1.5 W Features Silicon planar Zener diode Low profile surface-mount package Low leakage current Excellent stability High temperature soldering: 260 o C/ seconds
1N5333B-1N5388B. Features. Mechanical Data DO - 201AE POWER DISSIPATION: 5.0 W. Zener Diodes MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
N333B-N388B POWER DISSIPTION:.0 W Features DO - E Silicon planar power zener diodes For use in stabilizing and clipping curcuits with high power rating. Standard zener voltage tolerance is ±%. dd suffix
BZW04-5V8 thru BZW TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors DO-41 (DO-204AL) FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 400 W peak pulse power capability with a 10/0 μs waveform,
Part Number Compliance Case Packaging (Type Number)-7* Commercial SOD323 3,000/Tape & Reel
SURFACE MOUNT PRECISION ZENER DIODE Features Very Sharp Breakdown Characteristics Very Tight Tolerance on V Z Ideally Suited for Automated Assembly Processes Very Low Leakage Current Totally Lead-Free
Multilayer Chip Varistors
Features: Multilayer fabrication technology. -55 C to 125 C operating temperature range. Operating voltage range V M (DC) at 5.5V to 85V. Able to withstand ESD test of IEC-61000-4-2. Bi-directional clamping
SMP75. Trisil for telecom equipment protection. Features. Description. Applications. Benefits
Trisil for telecom equipment protection Features bidirectional crowbar protection voltage: 8 V low leakage current: I R = 2 µa max holding current: I H = 15 ma min repetitive peak pulse current: I PP =
Thick Film Chip Resistor
Power Rating: Ratings: Type 1206 Power Rating Max. Working Voltage Max. Overload Voltage Temperature Range 0.125W (1/8W) 200V 400V Ambient Temperature 70 C -55 C to +155 C Resistors shall have a power
SM320A~SM3200A SCHOTTKY DIODE REVERSE VOLTAGE 20 TO 200V FORWARD CURRENT 3.0A
320A~3200A DESCRIPTION The 320A~3200A are available in A Package. ORDERING INFORMATION Package Type Part Number 320A 340A 360A 380A A 3100A 3120A 3150A 3200A Note 5,000pcs/Reel AiT provides all RoHS Compliant
Surface Mount Zener Diode
Surface Mount Zener Diode FEATURES - Zener voltages from : 2.4V - 39V - Planar die construction - Ideally suited for automated assembly processes - Moisture sensitivity : Level 1 per J-STD-2 MECHANICAL
ESDA6V1-4BC6 QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION ASD
ASD ESDA6V1-4BC6 QUAD BIDIRECTIONAL TRANSIL SUPPRESSOR FOR ESD PROTECTION MAIN APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as: Computers Printers Communication
SMP30. Trisil for telecom equipment protection. Features. Applications. Description. Benefits
SMP3 Trisil for telecom equipment protection Features Bidirectional crowbar protection Voltage range from 62 V to 27 V Low capacitance from 1 pf to 2 pf typ.@ 5 V Low leakage current: I R = 2 µa max. Holding
MM3ZxxxT1G Series, SZMM3ZxxxT1G Series. Zener Voltage Regulators. 300 mw SOD 323 Surface Mount
MM3ZxxxT1G Series, SZMM3ZxxxT1G Series Zener Voltage Regulators 3 mw Surface Mount This series of Zener diodes is packaged in a surface mount package that has a power dissipation of 3 mw. They are designed
SEMICONDUCTOR GENERAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 5 mw SOT- Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP Zener Voltage Regulator Diodes Manufacturing Locations: WAFER FAB: Phoenix,
SOD123. Top View. Date Code Key Year Code A B C D E H I J K L
SURFACE MOUNT ZENER DIODE Features Mechanical Data Planar Die Construction 5mW Power Dissipation General Purpose, Medium Current Ideally Suited for Automated Assembly Processes Totally Lead-Free & Fully
5KP_A. VRM : Volts PPK : 5000 Watts MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Features 5000W Peak Pulse Power Excellent clamping capability Low incremental surge resistance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min) Typical IR less then 1μA above 10V
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (uni-directional) 6.4 V to 49.1 V V BR (bi-directional) 6.4 V to 49.1 V V WM
PMEG2010EH; PMEG2010EJ; PMEG2010ET
PMEG200EH; PMEG200EJ; PMEG200ET Rev. 04 20 March 2007 Product data sheet. Product profile. General description Planar Maximum Efficiency General Application (MEGA) Schottky barrier rectifiers with an integrated
JEDEC DO-214AB(SMC) molded plastic. Solder plated, solderable per MIL-STD-750, Method 2026 Cathode indicated by color band except Bi-directional
3000W Surface Mount Transient Voltage Suppressor 3000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 220 volts Glass passivated junction Excellent clamping capability
ESDA25LY Automotive dual Transil array for ESD protection Features Applications Description Benefits
Automotive dual Transil array for ESD protection Features 2 Unidirectional Transil functions Low leakage current: 1 µa @ 24 V 300 W peak pulse power (8/20 µs) Benefits High ESD protection level: up to
NZQA5V6AXV5 Series. Transient Voltage Suppressors
Transient Suppressors ESD Protection Diode with Low Clamping This integrated transient voltage suppressor device (TVS) is designed for applications requiring transient overvoltage protection. It is intended
MM3ZxxxST1G Series, SZMM3ZxxxST1G Series. Zener Voltage Regulators. 300 mw SOD 323 Surface Mount Tight Tolerance Portfolio
MM3ZxxxST1G Series, SZMM3ZxxxST1G Series Zener Voltage Regulators 3 mw Surface Mount Tight Tolerance Portfolio This series of Zener diodes is packaged in a surface mount package that has a power dissipation
0201 Thick Film Chip Resistor
Features: Small size and light weight Highly reliable multilayer electrode construction Compatible with all soldering process Applications: Telecommunication Equipments Radio and Tape Recorders, TV Tuners
Transient Voltage Suppression Diodes Axial Leaded 1500W TVS Diode1.5KE Series
The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Dimension Dim Millimeters Inches Min
Small Signal Zener Diodes
MMSZ22 to MMSZ267 Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.3 to 7 V Test current I ZT 1.7 to 2 ma V Z specification Thermal equilibrium Int. construction
DATA SHEET ZENER DIODES 1 W DO-41 GLASS SEALED PACKAGE
DATA SHEET ZENER DIODES 1 W DO-41 GLASS SEALED PACKAGE ZENER DIODES RD2.0F to RD82F DESCRIPTION NEC type RD F Series are DHD (Double Heatsink Diode) Construction planar type zener diodes possessing an
SOD123F (Type B) Top View. Part Number Compliance Case Packaging (Type Number)-7* AEC-Q101 SOD123F (Type B) 3,000/Tape & Reel
SURFACE MOUNT ZENER DIODE Features Flat Lead Package Design for Low Profile and High Power Dissipation Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note
Resistor Kit CFR 1/4 W 5% (2.5 x 6.8)
Specifications: Kit No : 1171087 E12 Series = 85 values Quantity : 100 pieces per value Total Quantity : 8,500 pieces Ratings: Ratings shall be shown in the table 1. Power Rating: Type CR Rated Power 0.25W
ESDAxxSCx. Quad Transil array for ESD protection. Features. Applications. Description. Benefits. Complies with the following standards:
Quad Transil array for ESD protection Features 4 unidirectional Transil Functions Low leakage current: I R max. < 20 µa at V RM 400 W peak pulse power (8/20 µs) Benefits High ESD protection level: up to
Maximun Ratings and Electrical Characteristics at 25 C
SOD123W Voltage Power Dissipation 9.1 to 220 V 1 W FEATURE Low profile package Ideal for automated placement Low leakage current High surge current and zener capability Low differential resistance Low
EMIF02-MIC01F2 2-line IPAD, EMI filter including ESD protection Features Application Description Complies with the standards:
2-line IPAD, EMI filter including ESD protection Features 2-line symetrical low-pass filter Lead-free package High-density capacitor High-efficiency EMI filtering Very small PCB footprint: 1.42 mm x 1.92
EMIF01-SMIC01F2 IPAD. Single line EMI filter including ESD protection. Main application. Description. Benefits. Pin configuration (Bump side view)
IPAD Single line EMI filter including ESD protection Main application Single ended microphone in mobile phones and portable devices Description The is a highly integrated device designed to suppress EMI/RFI
BZT52-B2V4~BZT52-B75 SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 4 mwatt FEATURES Planar Die construction 4mW Power Dissipation.154(3.9).141(3.6).1(2.8).98(2.5) Zener Voltages from 2.4~75V Ideally Suited
Metal Film Precision Resistors CSR Series
Features Excellent overall stability Tight tolerance down to ±0.1% Extremely low TCR down to ±10 PPM/ C High power rating up to 1 Watts Applications Automotive Telecommunication Medical Equipment Measurement
Obsolete Product(s) - Obsolete Product(s)
8 line low capacitance EMI filter and ESD protection Main product characteristics Where EMI filtering in ESD sensitive equipment is required: LCD and camera for mobile phones Computers and printers Communication
Zener Voltage Regulators
Zener Voltage Regulators 200 mw SOD-323 Surface Mount This series of Zener diodes is packaged in a SOD 323 surface mount package that has a power dissipation of 200 mw. They are designed to provide voltage
SOT23-6L ESDALCL6-2SC6
Very low capacitance and low leakage current ESD protection Features 2 data-line protection Datasheet production data Protects V BUS Very low capacitance: 2.5 pf typ. Very low leakage current: 10 na at
TELECOM EQUIPMENT PROTECTION: TRISIL
SMP1LC-xxx TELECOM EQUIPMENT PROTECTION: TRISIL FEATURES Bidirectional crowbar protection Voltage range from 8V to 262V Low capacitance from 3 pf to 45pF typ @ 5V Low leakage current : I R =2µA max Holding
ESDA25B1 TRANSIL ARRAY FOR ESD PROTECTION. Application Specific Discretes A.S.D. I/O 6 I/O 1 I/O 2 I/O 5
Application Specific Discretes A.S.D. ESDA25B TRANSIL ARRAY FOR ESD PROTECTION APPLICATIONS Where transient overvoltage protection in ESD sensitive equipment is required, such as : - COMPUTER - PRINTERS
Multilayer Chip Varistors
Features: Multilayer fabrication technology -55 to 125 C operating temperature range Operating voltage range VM (DC) at 5.5 V to 85 V Able to withstand ESD test of IEC-61000-4-2 Bi-directional clamping
Features. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
Dual back-to-back Zener diode
Rev. 01 28 January 2008 Product data sheet 1. Product profile 1.1 General description in a SOD323 (SC-76) very small Surface-Mounted Device (SMD) plastic package. 1.2 Features Non-repetitive peak reverse
AN2408 Application note
Application note 900mA standalone linear Li-Ion battery charger with thermal regulation Introduction One way to minimize the size and complexity of a battery charger is to use a linear-type charger. The
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
ZENER DIODES RD2.0S to RD150S
DATA SHEET ZENER DIODES RD2.0S to RD150S ZENER DIODES 200 mw 2-PIN SUPER MINI MOLD DESCRIPTION Type RD2.0S to RD150S series are 2 pin super mini mold package zener diodes possessing an allowable power
EMIF M16. 8-line IPAD low capacitance EMI filter and ESD protection in micro QFN package. Features. Description.
8-line IPAD low capacitance EMI filter and ESD protection in micro QFN package Features EMI (I/O) low-pass filter High efficiency in EMI filtering: Greater than 30 db attenuation at frequencies from 900
EMIF M8. 4-line IPAD low capacitance EMI filter and ESD protection in micro QFN package. Features. Applications. Description
4-line IPAD low capacitance EMI filter and ESD protection in micro QFN package Features EMI symmetrical (I/O) low-pass filter High efficiency in EMI filtering: -34 db at frequencies from 900 MHz to 1.8
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 207 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
The Powermite Family. Contents. Introduction. Outperforms Conventional SMT
The Powermite Family Introduction Powermite is Microsemi s patented low-profile architecture for packaging surface mount devices with the industry's highest power density in the smallest possible footprint.
Low forward voltage Ultra small SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior
Rev. 02 15 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Schottky barrier triple diode with an integrated guard ring for stress protection. Three electrically isolated