Grosvenor Plus Technical

Transcription

1 533 Grosvenor Plus Technical wiring devices decorative Socket Outlets Grosvenor Plus Decorative finish 3A socket outlets comply with BS 363: Part : V a.c. 3A per socket outlet Terminal capacity: Live, neutral & earth 3 x 4mm x 6mm (stranded) (Dual earth terminals on list No. K4357) Ambient operating temperature: (not to exceed an average of more than 5 C in any 4 hour period) IPXD Cable management Decorative finish socket outlets can be mounted in a variety of MK trunking systems. A range of socket outlets designed for ease of installation and having all the advantageous design features of the Grosvenor Plus range. Non-standard clean earth sockets are for use on installations where restricted access is required and will only accept MK LN647 3A non-standard plug with T-shaped earth pin. The sockets have two independent earth terminals so that they can also be used for clean earth installations. K4357 is fitted with two earth terminals on a common busbar to provide a double earth facility for use when installations require a high integrity protective connection as specified within BS767 IEEWiring Regulations. The products can be quickly installed as replacement for existing 3 amp sockets or in a new installation. Round pin sockets A range of round pin sockets is also available, switched and unswitched. l Moulded on indicator flash on switches will not rub off totally safe l Optional neon indicators in the switch rockers with 75 visibility in the horizontal and vertical planes l 3 pin operated safety shutter l Printed terminal markings on grey rear mouldings for clearer identification l Top access, angled terminals make wiring easier and quicker l 3mm minimum switch contact gap l Double pole switching l Choice of black or white inserts l Additional electrical safety from neutral make first, break last feature l Switch contacts with silver contacts on both surfaces for good continuity l Only one size of screwdriver required for installation l Dual earth terminals for high integrity earthing on list No. K4357 l Backed out and captive terminal screws l Non-standard clean earth sockets available l Switchsockets available with matching metal caps For a full range of corresponding products, see pages in the product selector.

2 Grosvenor Plus Technical 534 technical hotline +44 (0) decorative wiring devices Socket Outlets Installation Socket outlets can be wall or bench mounted. Do not mount or use as a trailing socket or where they may be subject to excessive moisture or dampness gang switchsocket view from rear Top-facing, angled, backed-out terminals make wiring easier and quicker Box Types Flush Flush (for extra Surface Insulated wiring space) gang 86 ZIC 866 ZIC K40 WHI gang 86 ZIC 886 ZIC K4 WHI

3 white red on rcd protected 535 Grosvenor Plus Technical wiring devices decorative Sentrysocket RCD Protected Switchsocket Outlet Compliance with EC Directives, All Sentrysockets comply with the following EC Directives and are CEmarked: Low Voltage Directive Electromagnetic Compatibility Directive (89/336/EEC) Sentrysocket RCD Single Sockets also comply with the requirements of the following standards: BS 788: 990 BS EN Rated Voltage: 40V a.c. 3A resistive Rated tripping current 30mA and 0mA versions Terminal capacity: 3 x 4mm Ambient operating temperature: IPXD Single socket Sentrysockets are only suitable for use in TN-S system where the Supply Neutral Connection is connected to the Supply Earth. They are not suitable for connection across two lines of a 7V line to Neutral Voltage System. Cable management Sentrysocket provides a high level of protection against electrocution and gives further protection when used with appliances vulnerable to insulation damage, particularly when they are in damp environments or outdoors. These Sentrysocket units are not suitable for mounting in damp environments or outdoors. Sentrysocket, incorporating an RCD, is part of a complete range of fixed and portable wiring devices and circuit protection devices suitable for use in domestic, commercial and light industrial applications. Active control circuits Incorporate a Re-set mechanism and are mains failure sensitive, i.e. they will function under all the normal conditions expected of an RCD, but will also trip in the event of a power cut or a sudden, dramatic reduction in mains voltage. This makes them ideal for use where it would be hazardous for equipment to suddenly energise after return of mains power, such as use with rotating machinery and heat developing apparatus. Passive control circuits Incorporate a Stay-set mechanism and is mains failure proof, i.e. it will function under all the normal conditions expected of an RCD and will not trip in the event of a power cut. This makes it suitable for use with freezers or in inaccessible or unmanned locations. l Suitable for most residential, commercial and light industrial applications l Active and passive control circuit applications l Comply fully with current Wiring Regulations l Double pole switching l Flexible and versatile in use l Ideal for use with equipment subject to wet weather or high humidity l Part of a complete range of MK circuit protection devices l They are a.c. and pulsating d.c. sensitive for residual current Decorative finish Sentrysockets can be mounted in a variety of MK trunking systems. Installation Installation Sentrysocket outlets can be wall or bench mounted. Do not mount or use as a trailing socket or where they they may be subject to excessive moisture or dampness T test before use press button - T off (tripped) on active control device trips with loss of mains 0mA tripping current sentrysocke t Flush mounting steel wall box It should be noted that some of the conduit entries may be restricted, depending upon their positions and the depth of box used. Box Types Flush ZIC

4 Grosvenor Plus Technical 536 technical hotline +44 (0) decorative wiring devices Round Pin Socket Outlets Round pin socket outlets comply with BS 546: V a.c. Terminal capacities: amp sockets (K4380): 7 x mm 4 x.5mm x.5mm x 4mm 5 amp sockets (K438): x 4mm x 6mm (stranded) 5 amp sockets (K4383): 3 x 4mm x 6mm (stranded) Ambient operating temperature: (not to exceed an average of more than 5 C in any 4 hour period) IPXD A range of round pin socket outlets designed for ease of installation and having all the advantages and design features of the Grosvenor Plus range. These products can be quickly installed as replace ments for existing socket outlets or in new installations. l Top access terminals make wiring easier and quicker l Integral ON indicator on switches will not rub off totally safe l 3mm minimum switch contact gap l Double pole switching l Terminal screws backed out l Additional electrical safety from neutral make first, break last feature on switched sockets l Switch contacts with silver contact points on both surfaces for good continuity l 5A and 5A sockets contain a 3 pin operated safety shutter l Printed terminal markings on grey rear mouldings for clearer identification l A socket shuttered Installation Grosvenor Plus socket outlets can be wall or bench mounted Do not mount or use as a trailing socket or where they may be subject to excessive moisture or dampness. 9 Cable management Grosvenor Plus socket outlets can be mounted in a variety of MK trunking systems. Depth Amp sockets: mm 5 Amp sockets: mm 5 Amp sockets: 3mm Box Types Flush for extra Flush wiring space 5A and 5A 86 ZIC 866 ZIC A 3995 ZIC 866 ZIC 86 ZIC

5 537 Grosvenor Plus Technical wiring devices decorative 5AAmerican Socket Outlet Complies with SASO 03: 003 5AAmerican 7V a.c. 5A Terminal capacity: Live, neutral & earth x 4mm x 6mm (stranded) Ambient operating temperature: (not to exceed an average of more than 5 C in any 4 hour period) IPXD Installation Box Types Flush Flush for extra wiring space gang 86 ZIC 866 ZIC gang 86 ZIC 886 ZIC Grosvenor Plus socket outlets can be wall or bench mounted. Do not mount or use as a trailing socket or where they they may be subject to excessive moisture or dampness.

6 Grosvenor Plus Technical 538 technical hotline +44 (0) decorative wiring devices Power Modules K5830: BS 363: Part : 995 K583: IEC : 00 K583: SASO 03: 003 K5833: BS 546: 950 K5834: French National Standard NF C 6-34 A range of euro modules designed to provide a variety of power options. 3AUK 5AUK 6AGerman 6AFrench/Belgian 5AAmerican 50V a.c. 50V a.c. 50V a.c. 50V a.c. 7V a.c. 3A 5A 6A 6A 5A Terminal capacity: Live, neutral & earth 3 x 4mm x 6mm (stranded) Terminal capacity: Live, neutral & earth x 4mm x 6mm (stranded) Terminal capacity: Live, neutral & earth 4 x.5mm x.5mm x 4mm Terminal capacity: Live, neutral & earth x 4mm x 6mm Terminal capacity: Live, neutral & earth x 4mm x 6mm (stranded) Ambient operating temperature: (not to exceed an average of more than 5 C in any 4 hour period) Ambient operating temperature: (not to exceed an average of more than 5 C in any 4 hour period) Ambient operating temperature: (not to exceed an average of more than 5 C in any 4 hour period) Ambient operating temperature: (not to exceed an average of more than 5 C in any 4 hour period) Ambient operating temperature: (not to exceed an average of more than 5 C in any 4 hour period) IPXD IPXD IPXD IPXD IPXD 3AUK 5AUK 6AGerman 6AFrench/Belgian 5AAmerican K5830 K5833 K583 K5834 K583 BOX TYPES BOX TYPES BOX TYPES BOX TYPES BOX TYPES Minimum Minimum Minimum Minimum Minimum 5mm 5mm 46mm 46mm 5mm Extra wiring space Extra wiring space Extra wiring space 35mm 35mm 35mm Installation MK socket outlets can be wall or bench mounted. Do not mount or use as a trailing socket or where they may be subject to excessive moisture or dampness.

7 539 Grosvenor Plus Technical wiring devices decorative Shaver Supply Units Shaver supply units comply with BS EN : 998 Accommodates plugs as follows: l British 5mm diameter pins on 6.6mm pitch (30V socket) to BS 4573: 970. l European 4mm diameter pins on 7 to 9mm pitch (30V socket) to IEC 83: 975 Standard C5. l Australian 6.5 x.6 flat blades each set at 30 to the vertical on a nominal pitch of 3.7mm (30V socket) AS C: 964. l American 6.6 x.6 flat horizontal blades on.7mm pitch (5V socket) to ANSI C73.0. K70: 30V a.c. Input (will operate at 0-50V a.c.) K706: 7V a.c. Input (will operate at 0-30V a.c.) 30V or 5V nominal outputs Designed for ease of installation and having many of the advantageous design features of the Grosvenor Plus range. May be used in bathrooms and washrooms but must only be installed in accordance with the current IEE Wiring Regulations BS 767: 99: Amendment 3. K70: 00mA max. (internal thermister trip current) K706: 400mA max. (internal thermister trip current) Maximum load: 0VA No load voltage < 75V Terminal capacities: Each terminal will accommodate x 4mm or x.5mm solid conductors* Ambient operating temperature: IP4 (In Zone if fixed where direct spray from showers is unlikely) l Bottom access terminal screws make wiring quicker and easier l Automatic primary supply switching on insertion of plug l Choice of 30V or 5V output socket positions l Safety interlocked shutters to prevent insertion of two plugs simultaneously l Only one size of screwdriver required for installation 9 l Terminal screws supplied backed out and held captive within the terminal moulding l Printed terminal markings on grey rear mouldings for clearer identification l Front plate fixing screws retained on rear case moulding l Integral over current device to protect transformer Installation Shaver supply unit should be wall mounted. *The design of this unit means that on no load the transformer output is allowed to be as high as 75V. This means that rechargeable shavers intended for use on the continent may be damaged by the inrush current created by this higher voltage. Rechargeable shavers with a wide range of input voltage should be recharged at 5V. Shavers manufactured for the UK are designed to be used with a transformer unit. Loads in excess of 0VA may cause the solid state overload to operate before shaving is completed. This is to protect the transformer V shavers only 30V Wiring An installation instruction leaflet is available. List no PL. Cable management Decorative finish shaver supply units can be mounted in a variety of MK trunking systems. 3 5 Box Types Flush mounting only Metal box 878 ZIC (minimum metal mounting box depth is 47mm)

8 Grosvenor Plus Technical 540 technical hotline +44 (0) decorative wiring devices Connection Units All Decorative Finish connection units comply with BS 363: Part 4: 995. The 0A DP switch complies with BS 3676: Part : 989. Fuses are to BS 36 50V a.c. 3 amp Terminal capacity: Supply terminal: Load terminals: Flex outlet/cord grip capacities: x 6mm stranded x 4mm x 6mm stranded x 4mm min: core, 0.5mm max: 3 core,.5mm Ambient operating temperature: (not to exceed an average of more than 5 C in any 4 hour period) With flex outlet: IPXD Without flex outlet: IP4X A range of 3A fused connection units designed for the connection of refrigerators, water heaters, central heating boilers and other fixed appliances. The range is designed for ease of instal la tion and have the advantageous design features of the Grosvenor Plus range. Neon indicators Neon indicators can be included in the rockers of the switched connection units. In the case of unswitched units, they are located centrally and uppermost on the face plate. Neon indicators are integrally wired into the product and do not require separate connection when installing. The design gives 75 visibility in the horizon tal and vertical planes. Fuse carriers These are captive and are opened by a fast acting, screwdriver operated worm drive for ease of replacement. Fuse carriers can be locked open using a padlock, List No. K000. Flex outlets The products are equipped with very strong, push-fit nylon cord grips making installation safe, quick and easy. Cable management Decorative finish connection units and DP switches can be mounted in a variety of MK trunking systems. Box Types Flush 886 ZIC l Optional indicators in the switch rockers with 75 visibility in the horizontal and vertical planes l Worm-drive operated fuse carriers for additional security (tamper-proof version available) l Fuse carrier lockable in open position l All supply and load cables can be cut and stripped to the same length l Integrally wired indicators save installation time l Push-fit cord grips, for safer, quicker installation l Angled, top mounted terminal screws simplify wiring l Moulded on indicator flash on switches cannot rub off totally safe l Captive fuse carrier l Additional electrical safety from neutral make first, break last feature l Secure cable and flexible cord connection l All terminal and fixing screws operated by one-size (4mm) screwdriver l Backed out and captive terminal screws

9 54 Grosvenor Plus Technical wiring devices decorative Connection Units 9 fuse dia 9 Installation Decorative Finish connection units and 0A switches can be wall or bench mounted. Do not use on a trailing lead. Wiring Products must be installed in accordance with current IEE Regulations. Front outlet cord grip Supply and load cable cords cut and stripped to same length. Lockable fuse carrier

10 Grosvenor Plus Technical 54 technical hotline +44 (0) decorative wiring devices High Current Switches and Cooker Control Units All DP switches in the range conform to BSEN : 000 All Cooker Control Units in the range conform to BS 477: 99 (993). Specification for cooker control units. Cooker Connection Unit conforms to BS 5733: V a.c. Current: 3A/45A resistive Switch: 3mm contact gap Double pole operation except socket switch on CCUs Terminal capacity, 45A Switches and CCUs: 4 x 4mm 3 x 6mm x 6mm Terminal capacity, 3A Switch: x 4mm x 6mm Ambient operating temperature: (not to exceed an average of more than 5 C in any 4 hour period) IPXD (K56) IP4X (K4305, K4336) l Positive switch action l Positive double pole switching l Toggle action switches l Wide product choice l Chemically treated and lacquered to minimise corrosion A range of switches and cooker control units harmonising with the Grosvenor Plus style, suitable for the switching of all domestic, commercial and industrial appliances where higher current ratings are required, i.e. cookers, heaters, commercial refrigeration units etc. Metal units are particularly suitable for refurbishment projects. Box depths List No. Max. Cable Size Flush Surface Switches K4305 POB 6mm 35mm 30mm 0mm 46mm 40mm K4336 POB 6mm 35mm 40mm 0mm 46mm 40mm Cooker control units K56 POB 6mm 35mm 40mm 0mm 47mm N/A Box References Flush Surface metal Box depth gang gang gang gang ZIC 886 ZIC 40 K89 ALM/K899 ALM K830 ALM/K897 ALM ZIC ZIC Note: These switches are not recommended for switching large banks of PCs

11 543 Grosvenor Plus Technical wiring devices decorative High Current Switches and Cooker Control Units off on off on cooker off on socket K4305 K56 0 off on K4336 9

12 Grosvenor Plus Technical 544 technical hotline +44 (0) decorative wiring devices Plateswitches All Decorative Finish plateswitches comply with BS EN : V a.c. 50Hz 0 amps no derating when used on fluorescent or inductive loads Switches can be wired as either one-way or two-way. Choice of white or black inserts, or black inserts with matching metal rocker switches. Terminal capacity: All products 4 x mm 4 x.5mm x 4mm x 6mm Contact gap: 3mm switch contact gap Operating temperature: ) IP4X l Two way switches can be wired as one or two way l All products clearly printed with BS Nos., ratings, etc l Matching Grid switches available in 0 or 0A ratings l 3mm switch contact gap l Positive switch action l Top access, backed out and captive terminal screws l An earth terminal is provided attached to rear of product gang gang 3 gang Operational testing (all plateswitches): tested to 00,000 operations for mechanical life tested to 30,000 operations at 0 amp rating 7 All plateswitches in this ranges are rated 0AX. Cable management Decorative finish plateswitches can be mounted in a variety of MK trunking systems. Box Types Flush 3995 ZIC Sectional drawings show the furthest projections from the back of the frontplate (wall surface).

13 545 Grosvenor Plus Technical wiring devices decorative Plateswitches Wiring Diagrams One-way switching Common L N Lamp/s Two-way switching wire control Common Common L N Two-way switches Lamp/s Dotted lines show alternative switch positions Two-way switching plus intermediate switching wire control Common Common L N Two-way switch Intermediate switch Two-way switch Lamp/s Dotted lines show alternative switch positions Two-way switching 3 wire control Common Common L N Lamp/s SW.L Two-way switches Dotted lines show alternative switch positions Two-way switching plus intermediate switching 3 wire control Common Common L N Lamp/s SW.L Two-way switch Dotted lines show alternative switch positions Intermediate switch Two-way switch N.B. Terminal positions may alter. The above diagrams are to show wiring layout.

14 Grosvenor Plus Technical 546 technical hotline +44 (0) decorative wiring devices Dimmer Switches All CE marked Decorative finishes dimmer switches comply with the EC Low Voltage Directive: 73/3/EEC, Electromagnetic Compatibility Directive 89/336/EEC They also comply with BS EN and BS EN 5505 Non-UKdimmer switches conform to the relevant parts of BS 558. Mains Supply Voltage: 30V a.c. (Nominal) 0V a.c. (Nominal, Non-UK) Mains Supply Voltage Range: 6V a.c. to 53V a.c. 00V a.c. to 50V a.c Mains Supply Frequency: 50Hz ±3Hz 60Hz ±3Hz Type of Loads: Standard Dimmers: Fused GLSTungsten Filament lamps only to BS EN 60064: 996 and BS EN 6043-: 000, rated at 30/40V Intelligent Dimmers: Fused GLSTungsten Filament lamps to BS EN 60064: 996 and BS EN 6043-, rated at 30/40V. Dimmable wire wound or electronic Low Voltage Transformers of good quality. Can also be used with good quality mains voltage halogen lamps incorporating GU0 bases. Please check with lamp manufacturer to determine suitability. Note: Transformer must be suitable for dimming using phase delay (leading edge) and NOT only phase cut (trailing edge) type of dimmers. Warning: These dimmer switches are not suitable for use with Fluorescent Lamps or Energy Saving Lamps. Operating temperature: 0 C to +40 C) IP4X Grosvenor Dimmer Switches fall into three categories: ) Standard Dimmer Switches ) Intelligent Dimmer Switches 3) Non-UK Dimmer Switches Standard Dimmer Switches Dimmer Switches belonging to this category employ simpler electronic circuitry and the CE marked products make use of thermal switches to conform to the very stringent requirements of the Standard BS EN , for overload protection. They are only suitable for use with normal tungsten filament lamps with internal fuses, conforming to BS EN 60064: 996 and BSEN6043- standards and do not have any added features, e.g. soft start, ability to control dimmable transformers for low voltage, etc. Standard Dimmer Switches are not suitable for use with transformers for Low Voltage Lighting or Fluorescent Loads, including Energy Saving Lamps. Intelligent Dimmer Switches Dimmer Switches belonging to this category, employ the latest, state of the art, micro-controller based electronic circuitry and use current sensing to compute the load conditions. These products show progressive reaction to overload conditions, depending on the extent of overload as shown in the table below. List numbers belonging to this category are identified by the suffix letters LV, e.g. K4306 POB LV. All MKIntelligent Dimmer Switches employ one pole change over switches to facilitate two way switching. MKIntelligent Dimmer Switches are not suitable for use with Fluorescent Loads, including Energy Saving Lamps. Only one Dimmer Switch can be used in a two-way switching circuit. Overload reaction W CIRCUIT W CIRCUIT COMMENTS Overload management: overload management: W nominal 40-0W nominal W function without dimming 40-75W function without dimming > W dim to 68V±8V r.m.s. > W dim to 68V±8V r.m.s. This is the minimum > 700W switch off > 375W switch off controlled voltage Non-UK Dimmer Switches Dimmer switches belonging to this category only conform to the safety parts of BS EN , without conforming to the EMC requirements. Loads suitable for use with standard dimmer switches above are also suitable for use with this category of dimmer switch.

15 547 Grosvenor Plus Technical wiring devices decorative Dimmer Switches Intelligent Dimmer Switches incorporate the following advanced features l Suitable for dimming Low Voltage Halogen lamps via good quality, fully dimmable electronic or wire-wound transformers l Can be used with good quality mains voltage halogen lamps incorporating GU0 bases. Please check with lamp manufacturer to determine suitability l Load current sensing: These dimmers continuously monitor the load current to help protect against overheating in wire wound transformers and to prevent overloading of the dimmer for long term reliability. l Soft Start, which gradually increases the light output from the load over to 3 seconds after switch on. The Soft Start feature is also particularly beneficial when used to dim Mains Voltage Tungsten Halogen lamps which have inherent very high inrush current at switch on Standard Dimmer Switches l Suitable only for use with fused GLS Tungsten Filament lamps to BSEN and BS EN l One way dimmer switches incorporate manual soft start l Incorporate thermal switches for protection against overload gang single gang triple gang double Intelligent dimmer switches Rating Max No. of Transformers (total rating of all transformers must not exceed maximum VA rating of dimmer) gang single W (LV and mains voltage 4 dimmer halogen rating 40-40W/VA) gang double x W (LV and mains voltage 4 per dimmer dimmer halogen rating x 40-40W/VA) gang single W (LV and mains voltage 5 dimmer halogen W/VA) One-way switching L Supply 30V a.c. - 50Hz N Two-way switching (only one dimmer can be used) N Supply 30V a.c. - 50Hz L Load Load way switch Wires must be connected to the correct dimmer terminals. DO NOT connect earth to dimmer. L C L L L C L L C DIMMER DIMMER Please note the dimmer may be substituted for any of the Two-Way switches Box types Flush Surface gang (excluding double dimmers) 86 ZIC (5mm) gang (for double dimmers) 866 ZIC (35mm) gang 86 ZIC (5mm) gang switches (Albany MCOonly) K89 ALM/K899 ALM gang switches (Albany MCOonly) K830 ALM/897 ALM

16 Grosvenor Plus Technical 548 technical hotline +44 (0) decorative wiring devices TV/FM and Satellite Socket Outlets Grosvenor Plus TV sockets comply with the following: TV sockets K350, K35 and K353 BS 304: Part : 977/IEC 69-: 977, BS5733: 995 (where applicable) and IEC65, Cls 0., 0.3. TV sockets K355 BS 5733: 995 (where applicable). TV sockets cable specification: CT00 or equivalent Any standard low-loss TV co-axial cable: Outside 4-8mm diameter, inner conductor 0.5-mm diameter Insertion loss: Graphs showing insertion loss available on request F Type satellite socket (K355), cable specification: Co-axial cable: inner core diameter 0.5-.mm A part of the very wide range of products in the distinctive Grosvenor Plus style to meet the latest technical requirements and the standards applicable to modern technology in the installation of telephone and television equipment. Grosvenor Plus TV sockets will fit in plaster depth boxes. The F-type Satellite Socket may be used for connection of CATV, MATV and satellite TV installations. Digital TV modules are available. Ambient air: 0 C to +60 C IPXD l Single screw termination on TV outlets l Meet all relevant BS requirements l Quick, simple and reliable terminal connection l Part of a complete range of products for telephone, television and data processing requirements Typically 5 4 K430/43 K43 K435 5 Box types Flush gang 86 ZIC Sectional drawings show the furthest projections from the back of the frontplate (wall surface), including a typical coaxial connector in the case of TV sockets. All units will fit in 6mm plaster depth boxes.

17 549 Grosvenor Plus Technical wiring devices decorative TV/FM and Satellite Socket Outlets Installation (TV sockets) Product performance, systems compatibility Isolated Outlets are intended for use where safety isolation (rated at 000V a.c.) is required to provide protection against faults occurring within any mains powered product used on different parts of the distribution system. They are not suitable for use in systems where DC signals are passed through the socket, (e.g. where masthead/headend equipment is controlled by receiver/decoder equipment). FM TV DIST TV Diplexer Outlets are used in distribution systems where both TV and FM band signals are combined on a single aerial downlead. The filtering in the diplexer separates the appropriate signals and feeds them through to the relevant output connection port. TV VID 3 3 TV HI-FI Cable Routing and Use of Cable Clamp Sharp bends in the cable must be avoided during installation. The single TV/ FM socket is fitted with a cable clamp that can be fixed on either side of the termination position to facilitate this. When tightening the screening braid clamps ensure that the cable is firmly gripped and that the inner insulation is not squashed flat beyond a slight oval shape. TV 3 3 TV VID Safety Information TV outlets or modules must not be installed in the same enclosure as equipment rated in excess of 50V, (e.g. mains rated 3A sockets or switches). Method of installation of TV and FM aerial connection by using MK co-axial socket outlet and only one down lead. Conventional distribution system for TV and FM signals using a single aerial downlead. 3 A standard TV/FM diplexer product is required to combine the TV and FM signals from the separate aerials in the loft space. (Black lines in wiring diagram). The single cable feed from the diplexer then feeds to the input of a multi way distribution amplifier, typically located in the loft or garage. (Red line in wiring diagram). Each individual output from the distribution amplifier is then fed to the individual rooms in the house to a standard TV (single or diplexer) outlet to which the TV/VCR and/or Hi-Fi can be connected. (Blue lines in wiring diagram).

18 Grosvenor Plus Technical 550 technical hotline +44 (0) decorative wiring devices Euro and LJU6C Data Frontplates BS 5733: 995 Dimensions Height: mm Width: mm (G) 49.5mm (G) Depth: 9mm Aperture Dimensions (Nominal) Frontplates used for mounting snapfit data modules. Euro Frontplates Height: Width: 50mm 50mm (G) LJU6C Frontplates 00mm (G) Euro Frontplates Height: Width: 37mm mm gang K8 POB 9 l G and G frontplates l Grosvenor Plus style l Accept industry standard Euro or LJU6C snapfit modules l G Euro frontplate accepts Euro modules, (50 x 50mm aperture) l G Euro frontplate accepts 4 Euro modules, (00 x 50mm aperture) l G LJU6C frontplate accepts two LJU6C modules (7 x 37mm aperture) gang K84 POB l module (.5 x 50mm) blank available for Euro frontplates l Interchangeable modules clip into frontplate LJU6C Frontplates K7 POB

19 55 Grosvenor Plus Technical wiring devices decorative MK Modular Data Frontplates BS.5733: 995 Temperature range: Ambient air 0 C to +60 C IPXD l Meet all relevant BS, OFTEL and cabling standards l Interchangeable modules clip into grid frame which attaches to frontplate l Front fixing facilitates easy exchange of modules l Part of a range of products for telephone and data processing requirements A unique modular system in the distinctive Grosvenor Plus style comprising a range of socket modules for Data and Telephone use, with 4 matching frontplates capable of accepting combinations of interchangeable modules. Modules clip into mounting frames which, when attached to frontplates, provide a high degree of versatility, making the system ideal for use in all commercial, industrial and domestic applications. Dimensions 49.5 module K409 POB module K4093 POB 49.5 module K409 POB module K4094 POB

20 Grosvenor Plus Technical 55 technical hotline +44 (0) decorative wiring devices Grid Plus Front Plates BS 5733: 995 Grid Plus is a comprehensive modular switching and monitoring system ideal for a variety of applications within the commercial, public and domestic sectors. Dimensions module K433 POB module K433 POB 3 module K4333 POB 4 module K4334 POB module K4336 POB 8 module K4338 POB module K435 POB