VZBs. Power PCB Relay RT2 2 pole 8 A, DC and AC-coil. Features. Contact data

Transcription

1 Features 2 C/O or 2 N/O contacts Sensitive coil 400 mw DC- or AC-coil 5 kv / 10 mm coil-contact Protection class II (VDE 0700) Height 15.7 mm Sockets with PCB-type or screw-type terminals Applications Domestic appliances, heating control, emergency lighting, modems F0149-B Contact data Configuration of contact / max.breaking voltage AC Maximum breaking capacity AC Make current (max. 4 s at duty cycle 10%) Contact material 2 C/O contact or 2 N/O contact single contact 8 A 250 Vac / 440 Vac 2000 VA 15 A AgNi 90/10, AgNi 90/10 gold plated VBs of approved types on request Contact ratings Load Operations Standard RT A, 230 Vac, cosϕ= x10 5 RT (2) A, 250 Vac, on the N/O- N/C contact VDE 0631 RT 424 1/2 hp / 240 Vac, 1/4 hp / 120 Vac 6x10 3 UL 508 Coil data Nominal voltage DC coil Vdc AC coil Vac Nominal coil power DC coil 400 mw AC coil 0.75 VA Operate category 2 / b Coil versions, DC-coil Coil Nominal Pull-in Release Maximum Coil Coil code voltage voltage voltage voltage resistance current Vdc Vdc Vdc Vdc Ω ma ±10% ±10% ±10% ±10% ±10% ±12% ±12% 4.1 All figures are given for coil without preenergization, at ambient temperature +20 C Other coil voltages on request

2 Coil versions, AC-coil Coil Nominal Pull-in Release Maximum Coil Coil code voltage voltage voltage voltage resistance current Vac Vac Vac Vac Ω ma ±10% ±15% ±15% 3.2 All figures are given for coil without preenergization, at ambient temperature +20 C Insulation Dielectric strength coil-contacts 5000 V rms open contact circuit 1000 V rms adjacent contacts 2500 V rms Clearance / creepage 10 / 10 mm Insulation to IEC Voltage rating 250 V Pollution degree 3 Overvoltage category III Insulation to VDE 0110b (2/79) Insulation category / reference voltage C / 250 Other data Flammability class according to UL 94 V-0 Coil insulation system according to UL 1446 Class F Ambient temperature C Mechanical life DC-coil >30x10 6 operations AC-coil >5x10 6 operations Max. switching rate at rated- / minimum load 6 min -1 / 1200 min -1 Operate- / release time DC-coil typ. 7 / 2 ms Bounce time N/O contact/n/c contact typ. 1 / 3 ms Vibration resistance N/O / N/C contact 20 / 5 g, Hz Shock resistance (destruction) 100 g Category of protection (IEC 61810) RT II - flux proof, RT III - wash tight Relay weight 13 g 20 / 500 pcs. Accessories see accessories RT

3 Dimensions PCB layout / terminal assigment View on solder pins S0418-BA S0272-AA *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. 2 C/O contacts S0163-BJ 2 N/O contacts S0163-BK Rights to change data / design reserved

4 Accessories Industrial Power Relay RT / RP / SR2 and similar design: pinnings 3.5mm / 5mm; relay heights 15.7 / 25.5mm F0228-A Features New retainer clip with ejection function Easy replacement of relays on a densely packed DIN rail High quality rising clamp terminals Captive combination terminal screws No reduction of protection class or creepage/clearance with plastic retainer Simple plug-in indicator- and protection modules White snap-on tags Not suitable for bistable relays with 2 coils Accessories for sockets: Rejector LED- and protection modules Marking tags Socket with screw-type terminals for DIN rail mounting YRT Socket with screw-type terminals, pinning 3.5 mm for DIN rail mounting F0229-A YRT and YRT Logical setup of connections (input / output) Safe separation to VDE 0106 S0416-AA 12 A 250 Vac Ambient temperature C Protection category IP 20 Wire cross section 2 x 2.5 mm 2 with bootlace crimp 2 x 1.5 mm 2 Terminal torque 0.5 Nm max. 0.7 Nm 10 pcs. YRT Socket with screw-type terminals, pinning 5 mm for DIN rail mounting F0230-A S0416-AB Socket with screw-type terminals for DIN rail mounting YRT Socket with screw-type terminals, pinning 3.5 mm for DIN rail mounting YRT Socket with screw-type terminals, pinning 5 mm for DIN rail mounting 1 pole 12 A *) 2 pole 2 x 12 A 250 Vac Ambient temperature C Protection category IP 20 Wire cross section 2 x 2.5 mm 2 with bootlace crimp 2 x 1.5 mm 2 Terminal torque 0.5 Nm max. 0.7 Nm 10 pcs. *) For 1 pole relays (16 A) the relay terminals 11-21, and have to be bridged For 1 pole relays (12 A) the relay terminals have to be connected to the socket terminals August 2001

5 Accessories Industrial Power Relay RT / RP / SR2 and similar design: pinnings 3.5mm / 5mm; relay heights 15.7 / 25.5mm Accessories for YRT , YRT YRT Plastic retaining clip, relay height 15.7 and 25.5 mm YRT Marking tag LED- and Protection Modules for YRT , YRT Easy insertion of module into the socket Wiring in parallel to the coil YMFDG 230 Protection diode (A1+, A2-), 6/230 VDC YMRCW 024 RC-network Vac YMRCW 230 RC-network Vac YMVAW 024 Varistor 24 Vac YMVAW 230 Varistor 230 Vac S0416-AC Marking tags White marking area 15.5 x 6 mm Snaps on socket in up to 4 positions LED red LED green YMLRA 024 YMLGA 024 LED Vdc/Vac YMLRD 024-A YMLGD 024 LED Vdc w. prot.diode (A1+, A2-) YMLRD 024 LED Vdc w. prot. diode (A1-, A2+) YMLRW 230 YMLGW 230 LED Vac F0231-A Socket with PCB terminals F0116-A S0322-AC RP Socket with PCB terminals, pinning 3.5 mm 12 A 300 Vac Dielectric strength coil/cont. >5000 V rms Ambient temperature C 100 pcs. F0117-A Socket with PCB terminals RP Socket with PCB terminals,pinning 3.5 mm RP Socket with PCB terminals,pinning 5 mm Accessories for RP , RP RT Plastic retaining clip RT, relay height 15.7 mm RP Plastic retaining clip RP, relay height 25.5 mm RT Metal retaining clip RT, relay height 15.7 mm RP Metal retaining clip RP, relay height 25.5 mm S0322-AD RP Socket with PCB terminals, pinning 5 mm 1 pole 12 A 2 pole 2 x 12 A 300 Vac Dielectric strength coil/cont. >5000 V rms Ambient temperature C 100 pcs. August 2001