SPRING-LOADED CONNECTORS PAD CONNECTORS
|
|
|
- Bernard Sharp
- 6 years ago
- Views:
Transcription
1 SPRING-LOADED CONNECTORS PAD CONNECTORS GENERAL SPECIFICATIONS The values listed below are general specs applying for Preci-Dip spring-loaded connectors. Please see individual catalog page for additional and product specific technical data. OPERATING TEMPERATURE RANGE C CLIMATIC CATEGORY (IEC) 55/85/21 OPERATING HUMIDITY RANGE Annual mean 75% MAX. WORKING VOLTAGE 100 VRMS/150 VDC (2.54 mm grid) U L Preci-Dip products are recognized by Underwriters Laboratories Inc. and listed under Connectors for Use in Data, Signal, Control and Power Applications, File Nr. E SPRING LOADED CONNECTORS MECHANICAL CHARACTERISTICS BASIC LOW RESISTANCE LOW RESISTANCE HOLLOW PISTON TYPE SHAPED PISTON TYPE CLIP IN-LINE DESIGN TYPE MIN. INITIAL HEIGHT 3 mm 6 mm 10 mm STROKE/HEIGHT RATIO Max. 0.3 Max. 0.2 Max MAX STROKE 2 mm 2 mm 1.5 mm MIN. INITIAL SPRING FORCE 0.2 N 0.2 N 0.2 N PACKAGING Standard connector packaging is card box. SMD mount connectors available on request with Tape & Reel packaging acc. to EIA Standard 481. These products are marked with the symbol: ELECTRICAL CHARACTERISTICS INSULATION RESISTANCE BETWEEN ANY TWO ADJACENT CONTACTS CAPACITANCE BETWEEN ANY TWO ADJACENT CONTACTS Min MΩ at 500 VAC Max. 1 pf ENVIRONMENTAL CHARACTERISTICS The sockets withstand the following environmental tests without mechanical and electrical defects: Dry heat steady state IEC i / Bb: 125 C, 16 h Damp heat cyclic IEC m / Db: 25/55 C, %rh, 1 cycle of 24 h Cold steady state IEC j / A: -55 C, 2 h Thermal shock IEC d / Na: -55/125 C, 5 cycles 30 min Sinusoidal vibrations IEC d / Fc: 10 to 500 Hz, 10 g, 1 octave/min, 10 cycles for each axis Shock IEC c / Ea: 50 g, 11 ms, 3 shocks in three axis During the above two tests, no contact interruption >50 ns does appear. Please consult for availability, size of tape, size of reel, number of components per reel and packing units. Solderability J-STD-002A, Test A, 245 C, 5 s, solder alloy SnAg3.8Cu0.7 Resistance to soldering heat J-STD-020C, 260 C, 20 s Moisture sensitivity J-STD-020C level 1 Resistance to corrosion: 1) Salt spray test IEC Ka: 48 h 2) Sulfur dioxide (SO2) test IEC Kc: 96 h at 25 ppm SO2, 25 C, 75 %rh 3) Hydrogen sulfide (H2S) test IEC Kd: 96 h at 12 ppm H2S, 25 C, 75 %rh 31
2 1.25 mm GRID / SINGLE ROW / SOLDER TAIL Fine pitch connectors with spring-loaded contacts (SLC), solder tail. High-rel contacts with clip, patented in-line design. CONTACT CLIP Beryllium copper (C17200) SPRING Stainless steel X12 CrNi177, DIN MAX. STROKE 1.4 mm FORCES 0.2 N initial 0.36 N at 1 /2 stroke MECHANICAL LIFE OPERATING CURRENT CONTACT RESISTANCE 40'000 cycles Max. 2 A 20 mω (static measurement, halfway position) PLATING CODE PIN PISTON 28 Tin 0.3 μm min. gold Surface mount miniature SLC connectors available on request. Please consult. 8PD Straight SLC connector, solder tail, single row Standard number of contacts: 14 Please consult for other pin number or partially equipped connectors 8PC Right angle SLC connector, solder tail, single row Standard number of contacts: 14 Please consult for other pin number or partially equipped connectors 32
3 2.54 mm GRID / SINGLE ROW / DOUBLE ROW / SOLDER TAIL Low resistance modular connectors with spring-loaded contacts (SLC), solder tail. Contacts with improved, shaped piston design. SPRING Music wire DIN 17223, gold plated MAX. STROKE 1.4 mm FORCES 0.25 N initial 0.85 N at 1 /2 stroke MECHANICAL LIFE OPERATING CURRENT CONTACT RESISTANCE 50'000 cycles Max. 3.5 A 10 mω (static measurement, halfway position) SPRING LOADED CONNECTORS S μm gold 0.5 μm gold SS 0.5 μm gold 0.5 μm gold NNN number of poles: Replace NNN with the requested number of poles, e.g. 813-S1-NNN for a double row version with 16 pins becomes 813-S S1-NNN-10-XXX101 Straight SLC connector, low profile, solder tail, single row AVAILABILITY FROM 2 to 64 contacts (standard number of contacts: 64) 813-S1-NNN-10-XXX101 Straight SLC connector, low profile, solder tail, double row AVAILABILITY FROM 4 to 72 contacts (standard number of contacts: 72) 813-SS-NNN Straight SLC connector, solder tail, double row AVAILABILITY FROM 4 to 64 contacts (standard number of contacts: 64) INITIAL HEIGHT A (mm) PLASTIC BODY HEIGHT B (mm) XXX CODE
4 2.54 mm GRID / SINGLE ROW / DOUBLE ROW /SURFACE MOUNT Basic modular connectors with spring-loaded contacts (SLC), surface mount. Contacts with hollow piston design for low profile. SPRING Stainless steel X12 CrNi177, DIN (Music wire DIN 17223, gold plated for ) MAX. STROKE 1.4 mm (1 mm for and 811/ ) FORCES 0.25 N initial 0.6 N at 1 /2 stroke MECHANICAL LIFE 100'000 cycles OPERATING CURRENT Max. 3.5 A CONTACT RESISTANCE 15 mω (static measurement, halfway position) COPLANARITY SMD TERMINATIONS Max. 0.1 mm (measured on 25 mm long connectors) SS 0.5 μm gold 0.5 μm gold NNN number of poles. Replace NNN with the requested number of poles, e.g. 811-SS-NNN for a single row version with 16 pins becomes 811-SS SS-NNN Surface mount SLC connector, very low profile, single row 811-SS-NNN-30-XXX101 Surface mount SLC connector, low profile, single row 813-SS-NNN-30-XXX101 Surface mount SLC connector, low profile, double row AVAILABILITY FROM 4 to 20 contacts (standard number of contacts: 20) 34 INITIAL HEIGHT A (mm) STROKE S (mm) PLASTIC BODY HEIGHT B (mm) XXX CODE
5 2.54 mm GRID / SINGLE ROW / DOUBLE ROW / SURFACE MOUNT Low resistance modular connectors with spring-loaded contacts (SLC), surface mount. Contacts with improved shaped piston design. SPRING Music wire DIN 17223, gold plated MAX. STROKE 1.4 mm FORCES 0.25 N initial 0.85 N at 1 /2 stroke MECHANICAL LIFE OPERATING CURRENT CONTACT RESISTANCE 50'000 cycles Max. 3.5 A 10 mω (static measurement, halfway position) SPRING LOADED CONNECTORS COPLANARITY SMD TERMINATIONS Max. 0.1 mm (measured on 25 mm long connectors) S μm gold 0.5 μm gold NNN number of poles. Replace NNN with the requested number of poles, e.g. 813-S1-NNN for a double row version with 16 pins becomes 813-S S1-NNN-30-XXX101 Surface mount SLC connector, low profile, single row 813-S1-NNN-30-XXX101 Surface mount SLC connector, low profile, double row AVAILABILITY FROM 4 to 20 contacts (standard number of contacts: 20) INITIAL HEIGHT A (mm) PLASTIC BODY HEIGHT B (mm) XXX CODE
6 2.54 mm GRID / SINGLE ROW / DOUBLE ROW / SURFACE MOUNT Basic modular connectors with spring-loaded contacts (SLC), surface mount with positioning pins. Contacts with hollow piston design for low profile. SPRING Stainless steel X12 CrNi177, DIN MAX. STROKE 1.4 mm (1.15 mm for 811/ ) FORCES 0.25 N initial 0.6 N at 1 /2 stroke MECHANICAL LIFE 100'000 cycles OPERATING CURRENT Max. 3.5 A CONTACT RESISTANCE 15 mω (static measurement, halfway position) COPLANARITY SMD TERMINATIONS Max. 0.1 mm (measured on 25 mm long connectors) SS 0.5 μm gold 0.5 μm gold NNN number of poles. Replace NNN with the requested number of poles, e.g. 813-SS-NNN for a double row version with 16 pins becomes 813-SS SS-NNN-30-XXX101 Surface mount SLC connector, low profile, single row, with 2 positioning pins 813-SS-NNN-30-XXX101 Surface mount SLC connector, double row, with 4 positioning pins AVAILABILITY FROM 4 to 20 contacts (standard number of contacts: 20) INITIAL HEIGHT A (mm) STROKE S (mm) PLASTIC BODY HEIGHT B (mm) XXX CODE
SPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SLC CONNECTORS SEE PAGE Straight
SPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS Quick Selector Chart Spring-loaded connectors and Pad connectors TEL +1 32 21 0 00 2 mm 2.5 mm 3 35, 36 35, 36 Surface mount perpendicular with positioning
PGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
TO FIND INDIVIDUAL SPECIFICATIONS OF STANDARD CONTACTS, PLEASE CONSULT OUR SEARCH ENGINE AT
CONTACT TECHNOLOGY INTRODUCTION Preci-Dip, a world wide leading manufacturer of precision machined contacts and related interconnect components is continuously improving its ability to design innovative
TO FIND INDIVIDUAL SPECIFICATIONS OF STANDARD CONTACTS, PLEASE CONSULT OUR SEARCH ENGINE AT
CONTACTS CONTACTS CONTACT TECHNOLOGY INTRODUCTION PRECI-DIP, a world wide leading manufacturer of precision machined contacts and related interconnect components is continuously improving its ability to
TO FIND INDIVIDUAL SPECIFICATIONS OF STANDARD CONTACTS, PLEASE CONSULT OUR SEARCH ENGINE AT
CONTACTS CONTACTS CONTACT TECHNOLOGY INTRODUCTION PRECI-DIP, a world wide leading manufacturer of precision machined contacts and related interconnect components is continuously improving its ability to
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
Construction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
Construction. Mechanical data Number of Contacts 7. Electrical data Insulation resistance Contact resistance max. Environmental data.
1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 59 The is a connector for MultiMediaCards. These cards have been developed as small form factor memory cards with ROM and RAM capabilities. The connector provides
SSL - Top Load Socket
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
Mechanical data Number of Contacts 8 or 16. Card extraction force. Electrical data Insulation resistance Contact resistance max. Card detection switch
1136 ITT - CCM Catalog 11/20/00 12:27 PM Page 8 CCM01 MK I CCM01 MK I connectors have fixed contacts and a blade card detection switch (not sealed). These connectors are intended for applications where
SERIES MCX 50 MICRO MINIATURE CONNECTORS
SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications
MAXIMUM SOLUTIONS (2/14 -- PR606) Mill-Max Mfg. Corp. 190 Pine Hollow Road, Oyster Bay, NY Fax:
MAXIMUM SOLUTIONS Mill-Max Series 854 Single Row and 855 Double Row Pitch Surface Mount and Through-Hole Spring-Loaded Connectors and Mating Target Connectors Mill-Max has developed high density, (1,27
PRODUCT SPECIFICATION
Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 1 Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 2 1.0 SCOPE. This specification covers performance, tests
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
MULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
Amphenol Amphenol Taiwan Corporation Sheet 1 of 16
Amphenol Amphenol Taiwan Corporation Sheet 1 of 16 Title: USB3.0 Product Specification Part Number: GSB3 Series Description: USB3.0 A&B Type Plug & Receptacle Revisions Control Rev. ECN Number Originator
Automation Controls Group Catalog. Connectors High Current Connectors. industrial.panasonic.com/ac/e/ Active Optical Connectors
Automation Controls Group Catalog Connectors industrial.panasonic.com/ac/e/ 2016-2017 High Current Connectors Active Optical Connectors T A B L E O F C O N T E N T S Page Feature of TOUGH CONTACT...2 Guide
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.
Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors
PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
Connectors DIN 41612/IEC
Connectors DIN 41612/IEC 60603-2 and completions General information The DIN 41612/IEC 60603-2 connector family consists of 13 basic sizes and many complementary versions. It was developed for use in 19"
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES
NARROW-PITCH, THIN AN SLIM CONNECTOR FOR BOAR-TO-FPC CONNECTION FEATURES 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): 27% smaller, 38% smaller
Top Load Socket: BTB
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
PRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
Our Most Important Connection is with You. SECTION 3. Board-to-Board: MMBX / SMP-MAX R223 / R222M
SECTION 3 Board-to-Board: MMBX / R223 / R222M Contents MMBX Introduction... 3-4 Interface... 3-5 Characteristics... 3-6 Plugs... 3-7 PCB receptacles... 3-7 to 3-8 Adapters... 3-9 Demo board... 3-10 Panel
Product Specification
SLH Series Socket, Vertical Orientation TLH Series Terminal, Vertical Orientation See www.samtec.com for more information. Page 1 1.0 SCOPE 1.1 This specification covers performance, testing and quality
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. UHD FEATURES & BENEFITS 0.100 x 0.050 staggered grid - High density optimizes trace routing through the backplane
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
Product specification
SMT Modular Jack single port vertical and horizontal 1 of 12 H PAGE 1.0 OBJECTIVE 2 2.0 SCOPE 2 3.0 GENERAL 2 4.0 DEFINITIONS 3.1 Qualification 2 3.2 Material 2 3.3 Finish 2 3.4 Design and construction
RTE02 and RTE03 Miniature Rotary Switches
RTE02 and RTE03 Miniature Rotary Switches RTE02 and RTE03 are two types of a subminiature rotary changeover switch to be mounted on PC boards. PC pins are in a 2.54 mm (0.100) grid. RTE02 with 2 positions
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page 1 of 15 CONTENTS CLAUSE PAGE 1.0 SCOPE..
High-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
For board-to-board. Narrow pitch connectors (0.5mm pitch)
Discontinued Discontinued as as of of September September 30, 30, 013 013 For board-to-board Narrow pitch connectors (0.5mm pitch) P5KL Series 5.8mm 3.3mm Products are discontinued. FEATURES 1. Low profile
onlinecomponents.com
YF53 For FPC/FFC* FPC connectors (0.5mm pitch) Back lock / Series New Low profile and space saving body of 1.0 mm high and mm deep (3.70 mm including the lever) and can have a minimum of four and two contacts
Amphenol Amphenol Taiwan Corporation Sheet 1 of 11
Amphenol Amphenol Taiwan Corporation Sheet 1 of 11 Title: Part Number: Description: RJ-MAG Connector Product Specification RJMG21202XXXXXX RJmag 1 x 2-Port W/ LED Revisions Control Rev. ECN Number Originator
Motocraft Multilayer Varistor
MLV1005 / 1608 SERIES ENGINEERING SPECIFICATION 1. SCOPE (1) Lead free type (2) SMD type zinc oxide based ceramic chip (3) Insulator over coat keeps excellent low and stable leakage current (4) Plating
CR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 70 C: CR0603-0.10 W, CR0805-0.125 W, CR1206-0.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
M-Series. Lead Wire Length (H, mm)
Metal Film Fixed Resistor Specifications Per IEC 60115-1 MIL-R-10509 d L H D Features Conformal multi-layer coating Color code per MIL & EIA standards Special tin-plated electrolytic copper lead wire Products
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: MINI SAS Connectors Product Specification G40 Series 0.80mm Pitch, Cable End and Board Mount Revisions Control Rev. ECN
Product Specification
MEC8 Series Socket, Vertical Orientation Other configurations available for: Right Angle Application Edge Mount Application Press Fit Application See www.samtec.com for more information. 1.0 SCOPE 1.1
NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive FETURES 1. The product lineup consists of the low profile of 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 7.0 mm, 8.0 mm, 11.5 mm, and 13.0 mm 14.0
OSFP Connector Cage & Cable System
PAGE /6 /5/7 UNRESTRICTED OSFP Connector Cage & Cable System PAGE /6 /5/7 UNRESTRICTED.0 SCOPE This Product Specification covers performance, test and quality requirements for the JPC Quad Small Form Factor
For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) Excellent contact reliability and mating in a super miniature size (width 1.
For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Excellent contact reliability and mating in a super miniature size (width 1.7 mm) FEATURES 1. Slim: width 1.7mm 2. Low profile construction:
High-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
ERNIPRESS Trapezoidal-Connectors Series TMC
ERNIPRESS Trapezoidal-Connectors Series TMC Subminiatur-D Connectors to DIN 41 652/IEC 807-3 with Press-fit zone General Solderless press-in technology for connectors in bus systems permits rationalized
Board-to-Board connections
Board-to-Board connections MBX/MFBX/MMBX connectors Edition 2014/08 Innovative connections Your partner for system solutions The HUBER+SUHNER Group is a leading global supplier of components and systems
FPC connectors (0.2mm pitch) Back lock
0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 100 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
SMA SERIES COAXIAL CONNECTORS
General Information Features Part Number Index Applications Coupling types and interface mating dimensions Semi-rigid conformable cable connectors Flexible cable connectors Connectors for modules Bulkhead
Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
Narrow pitch connectors (0.4mm pitch) Radiation noise reduced by multi-point ground and shield construction
For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4S Shield type Radiation noise reduced by multi-point ground and shield construction FEATURES 1. Radiation noise is reduced thanks
onlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
Mini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
CAS SLIDE SWITCHES (SMD) FEATURES PART NUMBER DESIGNATION C A S T B 1. Please refer to the LIST OF PART NUMBERS when placing orders.
SLIDE SWITHES (SMD) AS RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES over Polyphenylenesulphide Slider Housing Slider contact Polyamide Polyphenylenesulphide UL94V- Fixed contact
EN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
Right Angle 2.0mm Pitch Connector
AVX extends their board-to-board right angle connectors with a new 2mm pitch version, an addition to the existing versions 9155-300 with a 3mm pitch and 9155-500 with a 2.5mm pitch. This new connector
P4S. High reliability, space saving type, 1.5 to 3.0 mm mated height
For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4S High reliability, space saving type, 1.5 to 3.0 mm mated height FEATURES 1. TOUGH CONTACT construction provides high resistance
Dubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
Meet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
AEM GcDiode TM ESD Suppressors
Part Number: ES0603V014BT, ES0402V014BT Features Glass ceramic monolithic structure Ultra low capacitance (0.25pF typical) Low leakage current (
For board-to-fpc. High Current Connectors. 20 pins signal terminals used. With power terminal. 20 pins signal terminals can be reduced.
For board-to-fpc High Current Connectors A35US With Power Terminal 4. Power terminal type means power line is ensured without having to use signal line. Contributes to space savings New Power terminals
HE Insert Series. Product Specification Sep 11 th, 2015 Rev. B. Table of contents
HE Insert Series Table of contents 1. SCOPE... 2 1.1. Content... 2 1.2. Qualifications... 2 2. APPLICABLE DOCUMENTS... 2 2.1. TE Connectivity Documents... 2 2.2. Other Documents... 2 3. REQUIREMENTS...
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
SECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
For board-to-fpc. Narrow pitch connectors (0.35mm pitch)
For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35S Contributes to device miniaturization and advanced functionality with 2.5 mm width, 0.35 mm pitch and 0.8 mm mated height! FEATURES 1. 0.35
PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
IDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A
mm Connectors Surface Mount Technology, Solderless Pressfit, IDC Electrical And Mechanical Characteristics Number of Pins Technical data Climate Category Bearing and operating temperature area Current
Ultra Slim Relays 24
Ultra Slim Relays 24 Technical Data... 1 Specifications.2 Model Number Structure - Relays...3 Model Number Selection...4 Accessories...5 Safety Precautions...6 Ultra Slim Relays WERNER`s embody the latest
For board-to-fpc. Narrow pitch connectors (0.4mm pitch)
For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4S Being 2.5 mm in width, it facilitates ever-increasing device miniaturization and advanced functionality! FEATURES 1. TOUGH CONTACT construction
The Custom Interconnect Leader
7-16 Series.354.276.843.811 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: 50 ohms DC to 7 GHz 2,700 volts
EGA10201V05A0 Product Engineering Specification
RoHS Pb EGA10201V05A0 Product Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients.
Mini PCI Express & msata Connector
09.Mar.2012 Rev. C Mini PCI Express & msata Connector 1 Scope: 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of MINI PCI
Extract from new. Device Connectivity catalogue. HARTING har-flex. People Power Partnership
Extract from new Device Connectivity catalogue HARTING har-flex People Power Partnership . har-flex CONNECTORS The continuous scalability by an even number of contacts, i.e. from 6 to 100, of the HARTING
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
Applications & Features, Type SSMP When using blind mate connectors in an application, careful consideration has to be given to choosing the right con
SSMP Push-On Connectors & Adapters THE SSMP (Sub-Sub-Miniature-Push-On) is a 1.7 mm connector, using solid dielectric interface. The connector is 70% of the size of the SMP and therefore allows even higher
SPRING-LOADED CONNECTORS
SPRING-LODED CONNECTORS SERIES 811 & 813 GRID SURFCE MOUNT, LOW PROFILE SINGLE ND DOULE ROW STRIPS SINGLE ROW Series 811 Number of Pins X 1,8 Modular contacts for use on grid, available in five heights
Product Specification
HSEC8-DV Series.062 (1,57 mm) Card Thickness Other configurations available for: Edge Mount, Right Angle, -Through, Board Lock, Guide Rails, Weld Tab, Latching, Pick & Place Pad, and ECDP Latching options
PRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
INPAQ Global RF/Component Solutions
TEA10201V05A0 Specification Product Name Series Part No ESD Guard TM TEA Series (Thin Film Air Gap) TEA10201V05A0 Size EIA 0201 TEA10201V05A0 Engineering Specification 1. Scope This specification is applied
A35P ORDERING INFORMATION. Narrow pitch connectors (0.35mm pitch) RoHS compliant. Rated current
High current type For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35P Rated current Number of power contacts Max. 4 pins Max. 8 pins Rated current Power contact Signal contact Total 1.5 A/pin
2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
In-Series and Between-Series Adapters SMA
Adapters SMA In-Series and Between-Series Adapters SMA If your choice of SMA Adapter is not shown in this section, please refer to the Table below to determine other possible locations. Should you not
Product Specification
MEC6 Series Socket, Vertical Orientation Other configurations available for: Right Angle Application See www.samtec.com for more information. Page 1 1.0 SCOPE 1.1 This specification covers performance,
RH R13. Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : 30μ Gold LED:L-Green/Orange;R-Yellow
To: Customer P/N: UDE P/N: Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : 30μ Gold LED:L-Green/Orange;R-Yellow Spec No. RH20006-00 Update Date 2014/8/27 Revision C Approved
Product Specification AMP Connector USB Consortium, Plug & Receptacle. Lead Free Version
Product Specification 108-60034 AMP Connector USB Consortium, Plug & Receptacle Lead Free Version 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods