MCC. Revision: E 2014/02/26 1N5338B THRU 1N5388B. Features. 5 Watt Zener Diode 5.1 to 200 Volts. Maximum Ratings:
|
|
- Caren Mosley
- 6 years ago
- Views:
Transcription
1 Features Zener Voltage From 5.V to 00V Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level Lead Free Finish/RoHS Compliant (Note) ("P"Suffix designates Compliant. See ordering information) Marking : Cathode band and type number Halogen free available upon request by adding suffix "-HF" MCC Maximum Ratings: omponents 0736 Marilla Street Chatsworth!"# $%!"# Operating Temperature: -55 C to +50 C Storage Temperature: -55 C to +50 C 5 Watt DC Power Dissipation Maximum Forward A:. Volts Power Derating: 67 mw/ Above 75 Maximum thermal resistence: 5 o C/W from junction to lead 83 O C/W from junction to ambient Mechanical Data Case: JEDEC DO-5. Terminals: Solder plated, solderable per MIL-STD-750, Method 06. Standard Packaging: 5mm tape N5338B THRU N5388B 5 Watt Zener Diode 5. to 00 Volts DO-5 D A Cathode Mark B D C DIMENSIONS Note:. High Temperature Solder Exemption Applied, see EU Directive Annex 7. INCHES MM DIM MIN MAX MIN MAX NOTE A B C D of 6
2 MCC N5338B THRU N5388B ELECTRICAL CHARACTERISTICS (T A =5 C unless otherwise noted, V F =. I F =A for all types) MCC PART NUMBER REGULATOR VOLTAGE VZ TEST IZ DYNAMIC IMPEDANCE ZZT REVERSE IR TEST VOLTAGE VR REGULATOR IZM DYNAMIC KNEE IMPEDANCE ZZK@.0mA SURGE IZSM VOLTAGE REGULATION NOTE: VOLTS ma OHMS A VOLTS ma OHMS A VOLTS N5338B N5339B N5340B N534B N534B N5343B N5344B N5345B N5346B N5347B N5348B N5349B N5350B N535B N535B N5353B N5354B N5355B N5356B N5357B N5358B N5359B N5360B N536B N536B N5363B N5364B N5365B N5366B N5367B N5368B N5369B N5370B N537B N537B N5373B N5374B N5375B N5376B N5377B N5378B N5379B N5380B N538B N538B N5383B N5384B N5385B N5386B N5387B N5388B TOLERANCE AND VOLTAGE DESIGNATION - The JEDEC type numbers shown indicate a tolerance of+/-% with guaranteed limits on only Vz, I R,I r, and V F as shown in the electrical characteristics table. Units with guaranteed limits on all seven parameters are indicated by suffix B for+/-5% tolerance.. ZENER VOLTAGE (Vz) AND IMPEDANCE (Z ZT &Z ZK ) - Test conditions for Zener voltage and impedance are as follows; Iz is applied 40+/- ms prior to reading. Mounting contacts are located from the inside edge of mounting clips to the body of the diode(ta=5 o C) of 6
3 MCC N5338B THRU N5388B 3. SURGE (Ir) - Surge current is specified as the maximum allowable peak, non-recurrent square-wave current with a pulse width, PW, of 8.3 ms. The data given in Figure 5 may be used to find the maximum surge current for a quare wave of any pulse width between ms and 00ms by plotting the applicable points on logarithmic paper. Examples of this, using the 6.8v, is shown in Figure 6. Mounting contact located as specified in Note 3. (T A =5 ). 4. VOLTAGE REGULATION (Vz) - Test conditions for voltage regulation are as follows: Vz measurements are made at % and then at 50% of the Iz max value listed in the electrical characteristics table. The test currents are the same for the 5% and % tolerance devices. The test current time druation for each Vz measurement is 40+/- ms. (T A =5C ). Mounting contact located as specified in Note. 5. REGULATOR (I ZM ) - The maximum current shown is based on the maximum voltage of a 5% type unit. Therefore, it applies only to the B-suffix device. The actual I ZM for any device may not exceed the value of 5 watts divided by the actual Vz of the device. T L =75Cat maximum from the device body. APPLICATION NOTE: Since the actual voltage available from a given Zener diode is temperature dependent, it is necessary to determine junction temperature under any set of operating conditions in order to calculate its value. The following procedure is recommended: Lead Temperature, T L, should be determined from: T L = LA P D + T A LA is the lead to ambient thermal resistance and P D is the power dissipation. Junction Temperature, T J, may be found from: T J = T L + T JL T JL is the increase in junction temperature above the lead temperature and may be found from Figure 4 for a train of power pulses or from Figure for dc power. T JL = JL P D For worst case design, using expected limits of I Z, limits of P D and the extremes of T J ( T J ) may be estimated. Changes in voltage, V Z, can then be found from: V = VZ T J VZ, the Zener voltage temperature coefficient, is found from Figures and 3. Under high power pulse operation, the Zener voltage will vary with time and may also be affected significantly by the zener resistance. For best regulation, keep current excursions as low as possible. Data of Figure 4 should not be used to compute surge capability. Surge limitations are given in Figure 5. They are lower than would be expected by considering only junction temperature, as current crowding effects cause temperatures to be extremely high in small spots resulting in device degradation should the limits of Figure 5 be exceeded. 3 of 6
4 RATING AND CHARACTERISTICS CURVES N5338B THRU N5388B MCC TEMPERATURE COEFFICIENTS PD, MAXIUMU POWER DISSIPATION (WATTS) θvz, TEMPERATURE COEFFICIENT (mv/ I ZT RANGE VZ, ZENER (VOLTS) TL, LEAD TEMPERATURE Fig. -POWER TEMPERATURE DERATING CURVE θjl (t, D), TRANSIENT THERMAL RESISTANCE JUNCTION TO LEAD ( C/W) D = 0.5 D = 0. D = 0. D = 0.05 D = 0.0 NOTE: BELOW 0. SECOND, THERMAL NOTE: RESPONSE CURVE IS APPLICABLE NOTE: TO ANY LEAD LENGTH (L). Fig. -TEMPERATURE COEFFICIENT-RANGE FOR UNITS 6TO5VOLTS D = t, TIME (SECONDS) Figure 3. Typical Thermal Response L, Lead Length = 3/8 Inch P PK DUTY CYCLE, D = t /t SINGLE PULSE T JL = JL (t)p PK REPETITIVE PULSES T JL = JL (t, D)P PK t t JL, JUNCTION-TO -LEAD THERMAL RESISTANCE (C/W) MOUNT ON 8.0mm COPPER PADS TO EACH TERMINAL IR, PEAK SURGE (AMPS) 40 0 PW = ms* PW = 8.3ms* 4 PW = 00ms* SINE / SQUARE WAVE PW = 0ms* L, LEAD LENGTH TO HEAT SINK (INCH) NOMINAL VZ(V) Fig. 4-TYPICAL THERMAL RESISTANCE Fig. 5- NON-REPETITIVE SURGE VERSUS NOMINAL ZENER VOLTAGE (SEE NOTE 3) 4 of 6
5 RATING AND CHARACTERISTICS CURVES N5338B THRU N5388B ZENER VOLTAGE VERSUS ZENER (FIGURES 7,8) MCC I r, PEAK SURGE (AMPS) VZ = 6.8V PLOTTED FROM INFORMATION GIVEN IN FIGURE IZ, ZENER (ma) 00 0 T C =5 T= VZ, ZENER VOLTAGE (VOLTS) Fig. 6-PEAK SURGE VERSUS PULSE WIDTH(SEE NOTE 3) Fig. 7-ZENER VOLTAGE VERSUS ZENER VZ = 6.8 THRU VOLTS 00 IZ, ZENER (ma) 0 T= VZ, ZENER VOLTAGE (VOLTS) Fig. 8-ZENER VOLTAGE VERSUS ZENER VZ = THRU 5 VOLTS *** Data of Figure 3 should not be used to compute surge capability. Surge limitations are given in Figure 5. They are lower than would be expected by considering only junction temperature, as current crowding effects cause temperatures to be extremely high in small spots resulting in device degradation should the limits of Figure. 5 be exceeded 5 of 6
6 MCC Ordering Information : Device Part Number-TP Part Number-AP Part Number-BP Packing Tape&Reel: 4Kpcs/Reel Ammo Packing: 3Kpcs/Ammo Box Bulk: 5Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Corp. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights,nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Corp. and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. 6 of 6 3
MCC. Revision: /06/09 1N5338B THRU 1N5369B
Features Zener Voltage From 5.V to 5V Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 For Available Tolerances See Note Marking : Cathode band and type number Maximum Ratings:
More informationMCC 2EZ5.1D5 THRU 2EZ75D5. Features Glass Passivation Junction. 2 W Glass Passivated Junction Silicon Zener Diode 5.
omponents 76 Marilla Street Chatsworth!"# $%!"# EZ.D THRU EZ7D Features Glass Passivation Junction Lead Free Finish/RoHS Compliant (Note C) ("P"Suffix designates Compliant. See ordering information) Excellent
More informationMCC SMA2EZ5.1D5 THRU SMA2EZ75D5. Features. 2 W Glass Passivated Junction Silicon Zener Diode Volts.
Features Mechanical Data TERMINALS : Solder plated, solderable per MIL-STD-7, method 6 POLARITY : Color band denotes positive end (cathode) omponents 76 Marilla Street Chatsworth!"# $%!"# Lead Free Finish/Rohs
More informationM C C. 1N5221 THRU 1N5267
omponents 736 Marilla Street Chatsworth!"# $%!"# N522 THRU N5267 Features Wide Voltage Range Available Glass Package High Temp Soldering: 260 C for Seconds At Terminals Marking : Cathode band and type
More informationM C C. SMAJ4733A THRU SMAJ4764A. Features. 1 Watt Zener Diode 5.1 to 100 Volts DO-214AC (SMA)( LEAD FRAME)
Features omponents 20736 Marilla Street Chatsworth!"# $%!"# Halogen free available upon request by adding suffix "-HF" Low Zener Impedance Low egulation Factor VZ tolerance: ±5% For Surface Mount Applications
More informationtechnický list 1N5333B through 1N5388B 5 Watt Surmetic 40 Silicon Zener Diodes TECHNICAL DATA str 1
Dodavatel: GM electronic, spol. s r.o., Křižíkova 77, 86 Praha 8 zákaznická linka: 84 6 7 technický list TECHNICAL DATA Watt Surmetic 4 Silicon Zener Diodes This is a complete series of Watt Zener Diodes
More informationELECTROSÓN. 1N53 Series. 5 Watt Surmetic 40 Zener Voltage Regulators
5 Watt Surmetic 40 Zener Voltage Regulators This is a complete series of 5 Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon oxide
More information1N5333B Series. 5 Watt Surmetic 40 Zener Voltage Regulators
Preferred Device Watt Surmetic 40 Zener Voltage Regulators This is a complete series of Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of
More information2M6.8Z - 2M200Z Taiwan Semiconductor
2W, 6.8V - 200V Glass Passivated Junction Silicon Zener Diodes FEATURES - Glass passivated chip junction - Typical I R less than μa - Compliant to RoHS Directive 20/65/EU and in accordance to WEEE 2002/96/EC
More informationCZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free
CZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free Features - Glass passivated chip - Low leakage - Built-in strain relief - Low inductance - High peak reverse power
More informationM C C. ESDLC3603P3. Features Low Capacitance 0.4pF typical(i/o to I/O) Low operating Voltage: 5.0 V Low clamping voltage
Features Low Capacitance 0.4pF typical(i/o to I/O) Low operating Voltage: 5.0 V Low clamping voltage IEC61000 4 4 (EFT) 40A (5/50ns) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level
More informationSEMICONDUCTOR GENERAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 0 mw DO-35 Glass Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP 0 Milliwatt Hermetically Sealed Glass Silicon Zener Diodes Specification
More informationSilicon 5 Watt Zener Diodes
Compliant Silicon 5 Watt Zener Diodes DESCRIPTION The 1N5334Be3 through IN5388Be3 JEDEC registered series of axial-leaded 5.0 watt Zeners provides a voltage selection of 3.6 V to 200 V with different tolerances
More informationSurface Mount Silicon Zener Diodes
FEATURES CREAT BY ART - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Low inductance - Typical IR less than 0.5μA above 11V - ESD Rating of
More informationACZRC5340B-G Thru. ACZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device
CZRC5340B-G Thru. CZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device Features - Glass passivated chip. - Low leakage. - Built-in strain relief. - Low inductance. - High peak reverse power
More information1N47- Series DO-41. Mechanical Data. Page <1> 18/07/08 V1.1
Features: Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Typical I R less than 5.0µA above 11V. High temperature soldering guaranteed: 260 C/10 seconds at terminals
More informationZ1SMA4736A Z1SMA4757A
1W Surface Mount Zener Diodes Features For surface mounted applications in order to optimize board space Built-in strain relief Glass passivated junction Low inductance High temperature soldering guaranteed:
More informationContinental Device India Limited
5W AXIAL LEAD ZENER DIODES Axial Lead Plastic Package Features 1). Silicon Planar Power Zener Diodes. 2). For use in Stabillizing and Clipping Circuits with High Power Rating. 3). Standard Zener Voltage
More informationCHENMKO ENTERPRISE CO.,LTD
CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT ZENER SILICON PLANAR POWER ZENER DIODES VOLTAGE RANGE.V TO 9V MMPZBGP THRU MMPZBGP FEATURE * High temperature soldering type. * ESD rating of class (> kv) per human
More informationSZAF5.1A~SZAF220A ZENER DIODE 1.5W
DESCRIPTION The are available in SMAF Package ORDERING INFORMATION Package Type Part Number SZAF5.1A SZAF36A SZAF5.6A SZAF39A SZAF6.2A SZAF43A SZAF6.8A SZAF47A SZAF7.5A SZAF51A SZAF8.2A SZAF56A SZAF9.1A
More informationBZD17C SERIES Taiwan Semiconductor
0.8W, 11V - 220V Voltage Regulator Diodes FEATURES - Silicon zener diodes - Low profile surface-mount package - Zener and surge current specification - Low leakage current - Excellent stability - Compliant
More information1N5333B-1N5388B. Features. Mechanical Data DO - 201AE POWER DISSIPATION: 5.0 W. Zener Diodes MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
N333B-N388B POWER DISSIPTION:.0 W Features DO - E Silicon planar power zener diodes For use in stabilizing and clipping curcuits with high power rating. Standard zener voltage tolerance is ±%. dd suffix
More information200mW, 2% Tolerance Zener Diodes
200mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 3.6V to 36V V Z tolerance selection of ± 2% Moisture sensitivity level: level 1, per J-STD-020 Compliant to RoHS directive
More information500mW, 2% Tolerance SMD Zener Diode
500mW, 2% Tolerance SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 75V - Surface mount device type - Moisture sensitivity level - Pb free and RoHS compliant - V Z Tolerance Selection
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Surface mounting device (SMD) type Moisture sensitivity level: level, per J-STD-020
More informationTSZL52C2V4 thru TSZL52C39 Taiwan Semiconductor. SMD Zener Diode. Small Signal Product FEATURES MECHANICAL DATA
SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 39V - Designed for mounting on small surface - Extremely thin / leadless package - Packing code with suffix "G" means green compound
More information500mW 5% Zener Diodes
MMSZ522B - MMSZ5262B 500mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 20/65/EU and in
More informationM3Z2V4~M3Z75V ZENER DIODES 200mW ZENER VOLTAGE REGULATORS
DESCRIPTION This series of Zener Diodes is packaged in a SOD-323 surface mount package that has a power dissipation of 200mW. They are designed to provide voltage regulation protection and are especially
More informationPart Number Compliance Case Packaging (Type Number)-7* Commercial SOD323 3,000/Tape & Reel
SURFACE MOUNT PRECISION ZENER DIODE Features Very Sharp Breakdown Characteristics Very Tight Tolerance on V Z Ideally Suited for Automated Assembly Processes Very Low Leakage Current Totally Lead-Free
More informationSOD123F (Type B) Top View. Part Number Compliance Case Packaging (Type Number)-7* AEC-Q101 SOD123F (Type B) 3,000/Tape & Reel
SURFACE MOUNT ZENER DIODE Features Flat Lead Package Design for Low Profile and High Power Dissipation Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note
More informationSOD123. Top View. Date Code Key Year Code A B C D E H I J K L
SURFACE MOUNT ZENER DIODE Features Mechanical Data Planar Die Construction 5mW Power Dissipation General Purpose, Medium Current Ideally Suited for Automated Assembly Processes Totally Lead-Free & Fully
More information500mW, 2% Tolerance Zener Diodes
500mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 2% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-free
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V V Z tolerance selection of ± 5% Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
More informationSEMICONDUCTOR GENERAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 5 mw SOT- Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP Zener Voltage Regulator Diodes Manufacturing Locations: WAFER FAB: Phoenix,
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide Zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC
More informationMM3ZxxxST1G Series, SZMM3ZxxxST1G Series. Zener Voltage Regulators. 300 mw SOD 323 Surface Mount Tight Tolerance Portfolio
MM3ZxxxST1G Series, SZMM3ZxxxST1G Series Zener Voltage Regulators 3 mw Surface Mount Tight Tolerance Portfolio This series of Zener diodes is packaged in a surface mount package that has a power dissipation
More information500mW 5% Zener Diodes
5mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 36V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 211/65/EU and in accordance to WEEE 22/96/EC
More informationZener Voltage Regulators
Zener Voltage Regulators 200 mw SOD 323 Surface Mount This series of Zener diodes is packaged in a SOD 323 surface mount package that has a power dissipation of 200 mw. They are designed to provide voltage
More informationFeatures. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
More information500 mw AXIAL-LEADED ZENER DIODES
Available on commercial versions 0 mw AXIAL-LEADED ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The series of 0.5 watt Zener voltage regulators provides a selection from 1.8
More informationBZT52-B2V4~BZT52-B75 SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 4 mwatt FEATURES Planar Die construction 4mW Power Dissipation.154(3.9).141(3.6).1(2.8).98(2.5) Zener Voltages from 2.4~75V Ideally Suited
More informationMM3ZxxxT1G Series, SZMM3ZxxxT1G Series. Zener Voltage Regulators. 300 mw SOD 323 Surface Mount
MM3ZxxxT1G Series, SZMM3ZxxxT1G Series Zener Voltage Regulators 3 mw Surface Mount This series of Zener diodes is packaged in a surface mount package that has a power dissipation of 3 mw. They are designed
More information1N4728A-G SERIES SILICON ZENER DIODE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS FEATURES MECHANICAL DATA
SILICON ZENER DIODE VOLTAGE 3.3 to 75 Volt POWER 1 Watt FEATURES Low inductance High temperature soldering : 260 C /10 seconds at terminals Glass package has Underwriters Laboratory Flammability Classification
More informationBAT42W/BAT43W SURFACE MOUNT SCHOTTKY BARRIER DIODE
Features: Low Turn-on Voltage Fast Switching PN Junction Guard Ring Transient and ESD Protection Designed for Surface Mount Application Plastic Material UL Recognition Flammability Classification 94V-O
More informationMMSZ5221B-AU~MMSZ5262B-AU
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 51 Volt POWER 500 mwatt FEATURES 0.154(3.90) 0.141(3.60) Planar Die construction 500mW Power Dissipation Ideally Suited for Automated Assembly Processes
More information5KP_A. VRM : Volts PPK : 5000 Watts MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Features 5000W Peak Pulse Power Excellent clamping capability Low incremental surge resistance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min) Typical IR less then 1μA above 10V
More information500 mw SURFACE MOUNT ZENER DIODES
Available on commercial versions 0 mw SURFACE MOUNT ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The 1N4678UR-1 thru 1N4717UR-1 series of 0.5 watt glass surface mount DO-213AA
More informationMM3Z2V4C-MM3Z75VC Zener Diodes
MM3Z2V4C-MM3Z75VC Zener Diodes Features Wide Zener Voltage Range Selection, 2.4V to 75V VZ Tolerance Selection of ±5% (C Series) Very Small and Thin SMD package Matte Tin(Sn) finish, Pb Free 1 Connection
More informationI/O 4 NC I/O 3 I/O 1 V SS I/O 2
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Features Low Clamping Voltage Typical 9V at 10A 100ns, TLP Typical 9V at 10A 8μs/20μs IEC 61000-4-2 (ESD): Air ±30kV, Contact ±30kV IEC 61000-4-4 (EFT): 60A(5/50ns,
More informationFeatures U-DFN Pin Description (Top View)
4 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C I/O (Typ) 5.5V 3.5A 0.45pF Description The is a high-performance device suitable for protecting four high speed I/Os. These
More informationSOD123. Top View. Date Code Key Year Code P R Z A B C D E F G H
YM SURFACE MOUNT PRECISION ZENER DIODE Features Very Tight Tolerance on V Z Ideally Suited for Automated Assembly Processes Totally Lead-Free & Fully RoHS Compliant (Notes & 2) Halogen and Antimony Free.
More informationSurface Mount Zener Diode
Surface Mount Zener Diode FEATURES - Zener voltages from : 2.4V - 39V - Planar die construction - Ideally suited for automated assembly processes - Moisture sensitivity : Level 1 per J-STD-2 MECHANICAL
More informationDATA SHEET ZENER DIODES 1 W DO-41 GLASS SEALED PACKAGE
DATA SHEET ZENER DIODES 1 W DO-41 GLASS SEALED PACKAGE ZENER DIODES RD2.0F to RD82F DESCRIPTION NEC type RD F Series are DHD (Double Heatsink Diode) Construction planar type zener diodes possessing an
More informationZener Voltage Regulators
Zener Voltage Regulators 200 mw SOD-323 Surface Mount This series of Zener diodes is packaged in a SOD 323 surface mount package that has a power dissipation of 200 mw. They are designed to provide voltage
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W TVS Diode1.5KE Series
The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Dimension Dim Millimeters Inches Min
More information2 Anode. Parameter Symbol Value Units. Max Reverse Leakage Current V IZT IZT IZK VR Nom. V Min. V Max.
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4~33 Volt POWER 25 mwatt FEATURES.42(.5).37(.95) Planar Die construction 25mW Power Dissipation Zener Voltages from 2.4~ Ideally Suited for Automated Assembly
More informationP1SMA5914-AU ~ 1SMA5945-AU Series
SILICON ZENER DIODE oltage 3.6~68 Power 1.5 W Features Silicon planar Zener diode Low profile surface-mount package Low leakage current Excellent stability High temperature soldering: 260 o C/ seconds
More informationBZT52-C2V4S SERIES SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 200 mwatt FEATURES Planar Die construction 200mW Power Dissipation Zener Voltages from 2.4~75V 0.078(1.95) 0.068(1.75) Ideally Suited for
More informationSingle-Phase 6.0A Glass Passivated Bridge Rectifier
0 Single-Phase 6.0A Glass Passivated Bridge Rectifier 0 Features D3K Glass passivated die construction Low forward voltage drop High current capability High surge current capability Designed for surface
More informationZENER DIODES RD2.0S to RD150S
DATA SHEET ZENER DIODES RD2.0S to RD150S ZENER DIODES 200 mw 2-PIN SUPER MINI MOLD DESCRIPTION Type RD2.0S to RD150S series are 2 pin super mini mold package zener diodes possessing an allowable power
More informationMM5Z2V4 - MM5Z75V Zener Diodes
June 2015 MM5Z2V4 - MM5Z75V Zener Diodes Features Wide Zener Voltage Range Selection, 2.4 V to 75 V Flat Lead, Surface Mount Device Under 0.70 mm Height Extremely Small Outline Plastic Package SOD523F
More informationS3N 3 A, 1200 V Surface Mount Rectifier
S3N 3 A, 1200 V Surface Mount Rectifier Features Low-Profile Package Glass-Passivated Junction High Breakdown Voltage Rating UL Flammability Classification: 94V-0 August 2013 ELECTRICAL SYMBOL SMC/DO-214AB
More informationBZT52-B2V4S SERIES SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 200 mwatt FEATURES Planar Die construction 200mW Power Dissipation Zener Voltages from 2.4~75V Ideally Suited for Automated Assembly Processes
More informationMM3Z2V4B-MM3Z75VB Zener Diodes
MM3Z2V4B-MM3Z75VB Zener Diodes Features Wide Zener Voltage Range Selection, 2.4V to 75V VZ Tolerance Selection of ±2% (B Series) Very Small and Thin SMD package Matte Tin(Sn) finish, Pb Free 1 Connection
More informationCRY62~CRZ47 CRY62~CRZ47. Applications: Communication, Control and Measurement Equipment Constant Voltage Regulation Transient Suppressors
TOSHIBA Zener Diode Silicon Epitaxial Type CRY62~CRZ47 Applications: Communication, Control and Equipment Constant Regulation Transient Suppressors Unit: mm Average power dissipation: P = 0.7 W Zener voltage:
More information20 Zener rise operating resistance RZK IZ = 0.5 ma. 60 Reverse current. 0.1 A Temperature coefficient of zener voltage *3 SZ IZ = 5 ma IR VR = 4 V
Established : 009--09 Revised : 03-07- Doc No. TT4-EA-78 Silicon epitaxial planar type For constant voltage / For surge absorption circuit DZJ068 in SSMini type package Features Excellent rising characteristics
More informationMaximun Ratings and Electrical Characteristics at 25 C
SOD123W Voltage Power Dissipation 9.1 to 220 V 1 W FEATURE Low profile package Ideal for automated placement Low leakage current High surge current and zener capability Low differential resistance Low
More information1Z6.2~1Z390, 1Z6.8A~1Z30A
TOSHIBA ZENER DIODE SILICON DIFFUSED JUNCTION TYPE 1Z6.2~1Z390, 1Z6.8A~A CONSTANT REGULATION TRANSIENT SUPPRESSORS Unit: mm Average Power Dissipation : P = 1 W Peak Reverse Power Dissipation : P RSM =
More informationNZQA5V6AXV5 Series. Transient Voltage Suppressors
Transient Suppressors ESD Protection Diode with Low Clamping This integrated transient voltage suppressor device (TVS) is designed for applications requiring transient overvoltage protection. It is intended
More informationPackaging 1. Cathode 2. Anode V Zener operating resistance. 120 Reverse current IR VR = 1 V
Established : -3- Revised : 3-5-8 Doc No. TT4-EA-35 Silicon epitaxial planar type For constant voltage / For surge absorption circuit DZ43 in Mini type package.6 Unit: mm.3 Features Excellent rising characteristics
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationFeatures. Part Number Compliance Marking Reel Size (inches) Tape Width (mm) Quantity DT1240A-08LP Standard MW ,000/Tape & Reel
8 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C I/O (Typ) 5V 5.5A 0.6pF Description The is a high-performance device suitable for protecting four high-speed I/Os. These
More informationMBR2035CT - MBR2060CT 20 A Schottky Barrier Rectifiers
MBR2035CT - MBR2060CT 20 A Schottky Barrier Rectifiers Features Low Power Loss, High Efficiency High Surge Capacity Metal Silicon Junction, Majority Carrier Conduction High Current Capacity, Low Forward
More informationFeatures. Bottom View
2 CHANNEL LOW CAPACITANCE CSP TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C I/O (Max) 6V 5.5A.75pF Description This new generation TVS is designed to protect sensitive electronics from the damage
More informationDZ2S180C0L Silicon epitaxial planar type
Established : -5-7 Revised : 3-7- Doc No. TT-EA-597 DZS8CL DZS8CL Silicon epitaxial planar type For ESD protection Bi-directional type.8 Unit: mm.3 Features High ESD Low terminal capacitance Ct Halogen-free
More informationP6KE6.8A - 600CA. 600W Transient Voltage Suppressor. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) DO-15
Features Glass passivated chip junction 600W peak pulse power capability on 10/1000μs waveform repetition rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR Min. 600W
More information300 Zener rise operating resistance RZK IZ = 0.5 ma. 300 Reverse current A Temperature coefficient of zener voltage *3 SZ IZ = 2 ma
Silicon epitaxial planar type For constant voltage / For surge absorption circuit DZJ390 in SSMini type package Features Excellent rising characteristics of zener current Iz Low zener operating resistance
More informationMPLAD36KP14A MPLAD36KP400CA
Available Surface Mount 36,000 Watt Transient Voltage Suppressor DESCRIPTION These high power 36 kw rated transient voltage suppressors in a surface mount package are provided with design features to minimize
More informationCharacteristics Symbol Limit Unit IF = 1.5A V F -- IF = 3.0A V F -- VR = 800V I R -- --
GLASS PASSIVATED SURFACE MOUNT BRIDGE RECTIFIERS REVERSE VOLTAGE 800 Volts FORWARD CURRENT 3.0 Ampere GENERAL DESCRIPTION Suitable for AC-to-DC bridge full wave rectification for SMPS, LED lighting, adapter,
More informationSOD-723 Electrostatic discharge *2 ESD ±30 kv Junction temperature Tj 150 C
Established : 0-0-3 Revised : 03--0 Doc No. TT4-EA-4067 Silicon epitaxial planar type For ESD protection DES06 in SSSMini type package 0.6 Unit: mm 0.3 Features High ESD Halogen-free / RoHS compliant (EU
More informationSmall Signal Zener Diodes
MMSZ22 to MMSZ267 Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.3 to 7 V Test current I ZT 1.7 to 2 ma V Z specification Thermal equilibrium Int. construction
More informationMPLAD18KP7.0A MPLAD18KP200CA
Available Surface Mount 18,000 Watt Transient Voltage Suppressor DESCRIPTION These high power 18 kw rated transient voltage suppressors in a surface mount package are provided with design features to minimize
More informationSM320A~SM3200A SCHOTTKY DIODE REVERSE VOLTAGE 20 TO 200V FORWARD CURRENT 3.0A
320A~3200A DESCRIPTION The 320A~3200A are available in A Package. ORDERING INFORMATION Package Type Part Number 320A 340A 360A 380A A 3100A 3120A 3150A 3200A Note 5,000pcs/Reel AiT provides all RoHS Compliant
More informationDZ5X120D0R Silicon epitaxial planar type
Silicon epitaxial planar type For surge absorption circuit 2.9.3 Unit: mm.3 Features Excellent rising characteristics of Zener current Iz Low zener operating resistance Rz Halogen-free / RoHS compliant
More informationDZ4J036K0R Silicon epitaxial planar type
Established : 2009-2-2 Revised : 20-0-0 Doc No. TT-EA-2026 Silicon epitaxial planar type For constant voltage / For surge absorption circuit 2.0 0. Unit: mm 0. Features Excellent rising characteristics
More information1.0 V Zener voltage *1, *2 VZ IZ = 5 ma Zener operating resistance RZ IZ = 5 ma. 40 Zener rise operating resistance RZK IZ = 0.
Established : 9--4 Revised : 3-7- Doc No. TT4-EA-557 DZJ5 L Silicon epitaxial planar type For constant voltage / For surge absorption circuit.5.35 DZJ5 L Unit: mm.3 Features Excellent rising characteristics
More informationFeatures. Product Compliance Marking Reel Size (inches) Tape Width (mm) Quantity per Reel D5V0P4UR6SO-7 Standard DE ,000/Tape & Reel
YM ADVANCE INFORMATION CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (Min) I PP (Max) C T (Typ).5V 5A.1pF Description The is a high-performance device suitable for protecting four high-speed
More informationTOSHIBA Zener Diode Silicon Epitaxial Type. CRY62 to CRZ39
TOSHIBA Zener Diode Silicon Epitaxial Type CRY62 to CRZ39 Surge absorber Unit: mm Average power dissipation : P = 0.7 W Zener voltage : VZ = 6.2 to 39 V Suitable for compact assembly due to small surface-mount
More informationCD0603/1005-Z Surface Mount Zener Diode Series
*RoHS OMPLINT S3 Features RoHS compliant* Zener voltages 2. V to 39 V Fits SO323 and SO523 pplications - converters Portable electronics Industrial controllers esktop Ps and notebooks 63/5-Z Surface Mount
More information1N5221B - 1N5263B Zener Diodes
1N5-1N5 Zener Diodes Tolerance = 5% 1N5-1N5 Zener Diodes DO-35 Glass case COLOR BAND DENOTES CATHODE Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The
More informationDZ L Silicon epitaxial planar type
Established : -9-9 Revised : 3-5-8 Doc No. TT4-EA-378 DZ456L DZ456L Silicon epitaxial planar type For constant voltage / For surge absorption circuit Capability of withstanding a high surge type DZW56
More informationRB521S30 Schottky Barrier Diodes
RB521S30 Schottky Barrier Diodes Features Low Forward Voltage Drop Flat Lead, Surface Mount Device Under 0.70mm Height Extremely Small Outline Plastic Package SOD523F Moisture Level Sensitivity 1 Pb-free
More informationDual back-to-back Zener diode
Rev. 01 28 January 2008 Product data sheet 1. Product profile 1.1 General description in a SOD323 (SC-76) very small Surface-Mounted Device (SMD) plastic package. 1.2 Features Non-repetitive peak reverse
More informationCRY62~CRZ47 CRY62~CRZ47. Use in Communication, Automation and Measurement Equipment Constant Voltage Regulation Transient Suppressors
TOSHIBA Zener Diode Silicon Epitaxial Type CRY62~CRZ47 Use in Communication, Automation and Equipment Constant Regulation Transient Suppressors Unit: mm Average power dissipation: P = 0.7 W Zener voltage:
More informationIs Now Part of. To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need
More informationPMURA2J / MURB2J / MUR260K
SUPERFAST RECOVERY RECTIFIERS Voltage 600 V Current 2 A Features Superfast recovery times-epitaxial construction Low forward voltage, high current capability Hermetically sealed. Low leakage High surge
More informationPART OBSOLETE NO ALTERNATE PART. Features W-WLB Bottom View
2 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY Product Summary V BR (min I PP (max C T (typ 6V 7.5A.8pF Description The is a high-performance device suitable for protecting two high speed I/Os. These devices
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (uni-directional) 6.4 V to 49.1 V V BR (bi-directional) 6.4 V to 49.1 V V WM
More informationSOTxxC. Dual Transient Voltage Suppressors Array for ESD Protection WILLAS ELECTRONIC CORP
General Description The is a dual monolithic voltage suppressor designed to protect components which are connected to data and transmission lines against ESD. It clamps the voltage just above the logic
More informationMBR0540 Schottky Rectifier
MBR0540 Schottky Rectifier Features 0.5 A, Low Forward Voltage less than 460 mv 400 mw Power Dissipation Package Compact Surface Mount Package with The Same Footprint as Mini-melf October 2014 MBR0540
More information