GammaRay USB Module. Beta Innovations DOC No. : Rev. : A2-102 Date : 2, 2004 Part No. : ,
|
|
|
- Kathleen Wilkinson
- 6 years ago
- Views:
Transcription
1 GammaRay USB Module DOC No. : Rev. : A2-102 Date : 2, 2004 Part No. : , Beta Innovations (c)
2 Table of Contents Table of Contents...2 GammaRay-64 USB Module...3 GammaRay-256 USB Module...4 Main Features...5 Introduction...6 GammaRay-64 Pin-Out...7 GammaRay-256 Pin-Out...8 Connecting Various Switches...10 SPST Toggle Switches (On-Off) SPDT Switches (On-On) Rocker Switches (On-Off-On) Push Button Switches Knitter Rotary Switches Mechanical / Optical Rotary Encoders Hardware Specifications...12 Mechanical Specifications: GammaRay Bill Of Materials: GammaRay Mechanical Specifications: GammaRay Bill Of Materials: GammaRay Beta Innovations (c)
3 GammaRay-64 USB Module Figure 1 - GammaRay-64 Beta Innovations (c)
4 GammaRay-256 USB Module Figure 2 - GammaRay-256 Beta Innovations (c)
5 Main Features Easy installation The GammaRay devices are Low Speed USB HID compliant using default USB HID drivers and powered by the USB Bus. Digital Inputs GammaRay-64 device support up to 64 individual inputs. GammaRay-256 device support up to 256 individual inputs. Keyboard Emulation Keyboard emulation using Keyboard Studio. Beta Innovations (c)
6 Introduction The GammaRay USB module has been developed for applications requiring hardware input such as switches or digital circuitry such as ADCs. When used with switches, the multiplexed inputs prevent phantom signals or "ghosting" and do not require individual diodes such as scan matrix designs. Being a Low Speed USB HID compliant device, GammaRay utilizes default drivers included with operating systems. Beta Innovations (c)
7 GammaRay-64 Pin-Out JP1 JP2 Pin-Out Beta Innovations (c)
8 GammaRay-256 Pin-Out JP1 JP2 Pin-Out JP3 JP4 Pin-Out Beta Innovations (c)
9 JP5 JP6 Pin-Out JP7 JP8 Pin-Out Beta Innovations (c)
10 Connecting Various Switches The Plasma module does not use a scan matrix type of input layout. As such diodes are not required since it does not suffer from phantom signals when activating several switch inputs at the same time. SPST Toggle Switches (On-Off) SPDT Switches (On-On) Rocker Switches (On-Off-On) Beta Innovations (c)
11 Push Button Switches Knitter Rotary Switches These are special rotary type switches that do not require a decoder circuit in order to be used with the Plasma button inputs. Typical rotary encoders require a decoder circuit in order to convert the output signals into a form usable by this USB module. Mechanical / Optical Rotary Encoders These types of rotary encoders require a decoder circuit in order to convert the output signals into a form usable by this USB module. Rotary output signals can be 2-bit gray code or 2-bit quadrature code. Beta Innovations (c)
12 Hardware Specifications The GammaRay-64 firmware runs at 10 ms iteration rate whereas the GammaRay-256 firmware runs at 40 ms iteration rate. As such, any custom interface software should poll this device at least every 10 ms to prevent missing any input. All inputs are active low, which means you must ground an input in order to register a high on signal at the output. Windows will detect and load the appropriate HID driver for your the device and does not require that a custom device driver be installed. Maximum power consumption is 750mW (150mA) and is USB bus powered. You do not need to use an external power supply for this device, even when connecting (and powering) several rotary decoder modules to the onboard power pins specifically added for this purpose. Beta Innovations (c)
13 Mechanical Specifications: GammaRay-64 Figure 3 - GammaRay-64 Beta Innovations (c)
14 Bill Of Materials: GammaRay-64 C1 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C2 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C3 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C4 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C5 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C6 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C7 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) D1 1N914 Diode J1 USB Type 'B' Connector (Digi-Key Part No ND) JP1 Header, 17-Pin, Dual row JP2 Header, 17-Pin, Dual row JP3 Header, 2-Pin, Right Angle R1 10K, 10%, 1/4W R2 1.5K, 1%, 1/4W U1 HCF4067BEY Analog Multiplexer/Demultiplexer U2 HCF4067BEY Analog Multiplexer/Demultiplexer U3 HCF4067BEY Analog Multiplexer/Demultiplexer U4 HCF4067BEY Analog Multiplexer/Demultiplexer U5 PIC16C765-I/P EPROM-Based 8-Bit CMOS Microcontroller with A/D Converter 40 pin DIP socket for the PIC Micro Y1 6MHz Ceramic Resonator (Digi-Key Part no. X904-ND) Beta Innovations (c)
15 Mechanical Specifications: GammaRay-256 Figure 4 - GammaRay-256 Beta Innovations (c)
16 Bill Of Materials: GammaRay-256 C1 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C2 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C3 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C4 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C5 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C6 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C7 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C8 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C9 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C10 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C11 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C12 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C13 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C14 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C15 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C16 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C17 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C18 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) C19 0.1µF, 20%, 50VDC Ceramic (Digi-Key Part no. BC1127CT-ND) D1 1N914 Diode J1 USB Type 'B' Connector (Digi-Key Part No ND) JP1 Header, 17-Pin, Dual row JP2 Header, 17-Pin, Dual row JP3 Header, 17-Pin, Dual row JP4 Header, 17-Pin, Dual row JP5 Header, 17-Pin, Dual row JP6 Header, 17-Pin, Dual row JP7 Header, 17-Pin, Dual row JP8 Header, 17-Pin, Dual row JP9 Header, 2-Pin, Right Angle R1 1.5K, 1%, 1/4W R2 10K, 10%, 1/4W U1 HCF4067BEY Analog Multiplexer/Demultiplexer U2 HCF4067BEY Analog Multiplexer/Demultiplexer U3 HCF4067BEY Analog Multiplexer/Demultiplexer U4 HCF4067BEY Analog Multiplexer/Demultiplexer U5 HCF4067BEY Analog Multiplexer/Demultiplexer U6 HCF4067BEY Analog Multiplexer/Demultiplexer U7 HCF4067BEY Analog Multiplexer/Demultiplexer U8 HCF4067BEY Analog Multiplexer/Demultiplexer U9 HCF4067BEY Analog Multiplexer/Demultiplexer U10 HCF4067BEY Analog Multiplexer/Demultiplexer U11 HCF4067BEY Analog Multiplexer/Demultiplexer U12 HCF4067BEY Analog Multiplexer/Demultiplexer U13 HCF4067BEY Analog Multiplexer/Demultiplexer U14 HCF4067BEY Analog Multiplexer/Demultiplexer U15 HCF4067BEY Analog Multiplexer/Demultiplexer U16 HCF4067BEY Analog Multiplexer/Demultiplexer U17 PIC16C765-I/P EPROM-Based 8-Bit CMOS Microcontroller with A/D Converter 40 pin DIP socket for the PIC Micro Y1 6MHz Ceramic Resonator (Digi-Key Part no. X904-ND) Beta Innovations (c)
17 IMPORTATNT: You can substitute the analog multiplexer IC's (HCF4067BEY) with practically any other kind without any degradation in performance. Feel free to buy the least expensive types available from your local supplier of electronic components. Please verify the specs of the ceramic resonator before substituting with any other kind. If you have a hard time finding these ceramic resonators, you can order them from Digi-Key. Installing the headers and the USB 'B' connector is up to you. You can connect all the buttons and USB wires directly to the PCB board but I do not recommend doing this. Visit for the availability of preprogrammed Microchip micros. Beta Innovations (c)
Sim-Factory Plasma USB Module. DOC No. : Rev. : A7 Date : 10, 2003 Part No. : (c) 2003 Leo Lacava 1
Plasma USB Module DOC No. : 16409 Rev. : A7 Date : 10, 2003 Part No. : 600-100 (c) 2003 Leo Lacava 1 Table of Contents Table of Contents...2 Plasma USB Module...3 Main Features...4 Introduction...5 Plasma
Plasma Lite USB Module
Plasma Lite USB Module DOC No. : 16511 Rev. : A8-100 Date : 6, 2004 Firmware Rev. : 600-100 Beta Innovations (c) 2004 http:\\www.betainnovations.com 1 Table of Contents Main Features...4 Introduction...5
Plasma V2 USB Module
Plasma V2 USB Module DOC No. : 16411 Rev. : A7-211 Date : 5, 2004 Firmware Rev. : 600-210 Beta Innovations (c) 2004 1 Table of Contents Main Features...4 Introduction...5 Plasma Configuration...6 Mode
GammaTron USB Module
GammaTron USB Module Product ID. : 710 Board Rev. : 1.00 Date : June 24, 2007 Firmware Rev. : 1.11 Beta Innovations (c) 2006 http://www.betainnovations.com Table of Contents Main Features...5 Introduction...6
AL3159 Evaluation Module
Device Features Description V IN Range: 2.7V to 5.5V Up to 93% Max Power Efficiency 1% Current Matching Accuracy Between Channels Three Simple Logic Decoding LED On/Off Control Inputs Low Transition Threshold
M68HC705L4 PROGRAMMER BOARD APPLICATION NOTE
M68HC705L4PGMR JUNE 1992 M68HC705L4 PROGRAMMER BOARD (REVision A PWBs only) APPLICATION NOTE INTRODUCTION This application note describes the programming technique used to program and verify the XC68HC705L4
LO-LED64 Latched Output Card
LO-LED64 Latched Output Card Product ID. : LO-LED64 Rev. : 1.00 Date : Nov 23, 2007 Firmware Rev. : N/A Beta Innovations (c) 2007 http://www.betainnovations.com Table of Contents Connecting the LO-LED64
AP3156 Evaluation Module
Features V IN Range: 2.7V to 5.5V Fully Programmable Current with Single Wire - 32-Step Logarithmic Scale - 20/25mA Max Current per Channel - Four Low Current Settings Down to 50μA - Low IQ (50μA) for
KK1L 2x6 Antenna Switch Relay Controller / Dual Band Decoder Basic Assembly Version 4.8 (new 24-Aug-2009) Parts List updated 19-AUG-2016
KK1L 2x6 Antenna Switch Relay Controller / Dual Band Decoder Basic Assembly Version 4.8 (new 24-Aug-2009) Parts List updated 19-AUG-2016 Ronald Rossi, KK1L http://home.comcast.net/~kk1l Design Features:
ElectronFlux USB Module
ElectronFlux USB Module Product ID. : 800 Board Rev. : 1.00 Date : Mar 28, 2008 Firmware Rev. : 1.10 Node Firmware Rev. : 1.30 Beta Innovations Inc. (c) 2006-2008 http://www.betainnovations.com Table of
DMX512-4 Channel PWM Driver Board #805
DMX512-4 Channel PWM Driver Board #805 Overview The 4-channel PWM driver board provides four open drain (collector) type outputs that can be directly controlled from a DMX512 network. The four channels
Freescale Semiconductor, I
M68HC705X4PGMR/D1 August 1991 M68HC705X4 PROGRAMMER BOARD (REVision A PWBs only) INTRODUCTION This application note describes the programming technique used to program and verify the XC68HC705X4 microcontroller
MIDI CPU Hardware Rev K. User Manual
MIDI CPU Hardware Revision K User Manual Updated 2010-09-08 Additional documentation available at: http://highlyliquid.com/support/ Page 1 / 18 Table of Contents 1.0 Important Safety Information...2 2.0
PIC DESIGN (version 1) 2/11/2009
PIC DESIGN (version 1) 2/11/2009 The decision to design and construct a custom microcontroller was dictated by both practical and educational reasons. Although microcontroller development boards are readily
EVAL-ADG2128EB. Evaluation Board I 2 C CMOS, 8 12 Analog Switch Array with Dual/Single Supplies FEATURES DESCRIPTION
Evaluation Board I 2 C CMOS, 8 12 Analog Switch Array with Dual/Single Supplies EVAL-ADG2128EB FEATURES Full featured evaluation board for ADG2128 Various link options Direct hook up to USB port of PC
S USB-PC Connection (Cable Not Included) S USB Powered (No External Power Supply Required) S Real-Time Data Acquisition Through the USB
19-5610; Rev 1; 8/11 MAXADClite Evaluation Kit General Description The MAXADClite evaluation kit (EV kit) evaluates the MAX11645, Maxim's smallest, very-low-power, 12-bit, 2-channel analog-to-digital converter
NITRO Expansion Card
NITRO Expansion Card Product ID. : NITRO Rev. : 1.00 Date : Nov 23, 2007 Firmware Rev. : N/A Beta Innovations (c) 2007 http://www.betainnovations.com Table of Contents NITRO Expansion Card...3 Connecting
Mega128-DEVelopment Board Progressive Resources LLC 4105 Vincennes Road Indianapolis, IN (317) (317) FAX
Mega128-DEVelopment Board Progressive Resources LLC 4105 Vincennes Road Indianapolis, IN 46268 (317) 471-1577 (317) 471-1580 FAX http://www.prllc.com GENERAL The Mega128-Development board is designed for
EVAL-ADT7516. SPI -/I 2 C -Compatible, Temperature Sensor, 4-Channel ADC and Quad Voltage Output DAC FEATURES APPLICATIONS
SPI -/I 2 C -Compatible, Temperature Sensor, 4-Channel ADC and Quad Voltage Output DAC EVAL-ADT7516 FEATURES Easy evaluation of the ADT7516 Can be used to emulate ADT7517 and ADT7519 Evaluation software
Motor driver board. EB022
Motor driver board www.matrixmultimedia.com EB022 Contents About this document 3 Board layout 3 General information 4 Circuit description 5 Circuit diagram 6 2 Copyright About this document This document
Rapid40i PIC Prototyping PCB User Manual
Description This is a PCB designed to facilitate the rapid prototyping of a device based on a 40 pin Microchip PIC microcontroller. To allow users to focus on their application, we take care of key housekeeping
MegaAVR-DEVelopment Board Progressive Resources LLC 4105 Vincennes Road Indianapolis, IN (317) (317) FAX
MegaAVR-DEVelopment Board Progressive Resources LLC 4105 Vincennes Road Indianapolis, IN 46268 (317) 471-1577 (317) 471-1580 FAX http://www.prllc.com GENERAL The MegaAVR-Development board is designed for
solutions for teaching and learning
RKP18Motor Component List and Instructions PCB layout Constructed PCB Schematic Diagram RKP18Motor Project PCB Page 1 Description The RKP18Motor project PCB has been designed to use PIC microcontrollers
Building and using JasperMIDI
Building and using JasperMIDI Table of Contents Introduction... Bill Of Materials... 2 Building Choices... 3 Construction... 4 Installing in a Jasper enclosure... 5 Standalone use... 6 Using JasperMIDI...
DEV-1 HamStack Development Board
Sierra Radio Systems DEV-1 HamStack Development Board Reference Manual Version 1.0 Contents Introduction Hardware Compiler overview Program structure Code examples Sample projects For more information,
Trends in Prototyping Systems. ni logic Pvt. Ltd., Pune, India
Trends in Prototyping Systems ni logic Pvt. Ltd., Pune, India Focus of design dept. Electronic system & Flow Design problems Educating design Prototype USDP Features Applications Conclusion Agenda Faster
RASPBERRY PI MEGA-IO EXPANSION CARD USER'S GUIDE VERSION 2.3
RASPBERRY PI MEGA-IO EXPANSION CARD www.sequentmicrosystems.com USER'S GUIDE VERSION 2.3 GENERAL DESCRIPTION... 2 BOARD LAYOUT... 3 BLOCK DIAGRAM... 4 COMPONENT DESCRIPTION... 5 CONFIGURATION JUMPERS...
Rapid28iXL PIC Prototyping PCB User Manual
Description Features This is a PCB designed to facilitate the rapid prototyping of a device based on a 28 pin Microchip PIC microcontroller. To allow users to focus on their application, we take care of
CDN503 HIGH DENSITY I/O ADAPTER USER GUIDE
CDN503 HIGH DENSITY I/O ADAPTER USER GUIDE 13050301 (c) Copyright DIP Inc., 1996 DIP Inc. P.O. Box 9550 MORENO VALLEY, CA 92303 714-924-1730 CONTENTS DN503 PRODUCT OVERVIEW 1 DN503 INSTALLATION 1 POWER
CV Arpeggiator Rev 2 Build Documentation.
CV Arpeggiator Rev Build Documentation. Last updated 8-0-03 The CV Arpeggiator is a modular synth project used for creating arpeggios of control voltage. It utilizes a custom programmed PIC 6F685 micro
Rapid40iXL PIC Prototyping PCB User Manual
Description This is a PCB designed to facilitate the rapid prototyping of a device based on a 40 pin Microchip PIC microcontroller. To allow users to focus on their application, we take care of key housekeeping
Assignment 5. You can configure hardware options by setting jumper on the mainboard. See Figure 2-1 for jumper locations. Set a jumper as follows:
CIS 170 Microcomputer Hardware Name: Assignment 5 From the lack of having enough peripherals for this course (at least at this point), we have the necessity of doing some experiments mentally rather than
FUNCTIONAL BLOCK DIAGRAM DIGITAL POWER SUPPLY +5V +3.3V EXT. EXTERNAL ANALOG POWER SUPPLY V LOGIC V DD V SS SPI INTERFACE RDY RESET AD5292 GND
Evaluation Board for the 10-Bit, Serial Input, High Voltage Digital Potentiometer EVAL-AD5292EBZ FEATURES Full-featured evaluation board for the AD5292 Wiper buffer 4-wire ohm measurement capability Various
AN-719 APPLICATION NOTE One Technology Way P.O. Box 9106 Norwood, MA Tel: 781/ Fax: 781/
APPLICATION NOTE One Technology Way P.O. Box 9106 Norwood, MA 02062-9106 Tel: 781/329-4700 Fax: 781/326-8703 www.analog.com ADuC7024 Evaluation Board Reference Guide MicroConverter ADuC7024 Development
Turning Ideas Into Reality ABCircuits POB 123 New Hill NC (919) C922-SO IC
ABCircuits www.abcircuits.com POB 123 New Hill 27562 (919) 290-7104 74C922-SO IC Keyboard / Keypad Encoder for up to 16 switches MM74C922 Replacement IC General Description The 74C922-SO is designed as
Schematic Diagram: R2,R3,R4,R7 are ¼ Watt; R5,R6 are 220 Ohm ½ Watt (or two 470 Ohm ¼ Watt in parallel)
Nano DDS VFO Rev_2 Assembly Manual Farrukh Zia, K2ZIA, 2016_0130 Featured in ARRL QST March 2016 Issue Nano DDS VFO is a modification of the original VFO design in Arduino Projects for Amateur Radio by
RKP08 Component List and Instructions
RKP08 Component List and Instructions PCB layout Constructed PCB RKP08 Scematic RKP08 Project PCB Page 1 Description The RKP08 project PCB has been designed to use PIC microcontrollers such as the Genie
HFRD REFERENCE DESIGN High-Frequency XFP Host Board. Reference Design: (Includes Integrated RS-232 to I 2 C Conversion)
Reference Design: HFRD-18.0 Rev. 7; 11/09 REFERENCE DESIGN High-Frequency XFP Host Board (Includes Integrated RS-232 to I 2 C Conversion) Reference Design: High-Frequency XFP Host Board Table of Contents
VKey Voltage Keypad Hookup Guide
Page 1 of 8 VKey Voltage Keypad Hookup Guide Introduction If you need to add a keypad to your microcontroller project, but don t want to use up a lot of I/O pins to interface with it, the VKey is the solution
BSCB-2 BASIC STAMP CARRIER BOARD
BSCB-2 BASIC STAMP CARRIER BOARD Technical Manual Document Revision: 1.04 Date: 06 August 2003 BiPOM Electronics, Inc. 16301 Blue Ridge Road, Missouri City, Texas 77489 Telephone: 1-713-283-9970 Fax: 1-281-416-2806
ADT7470 Evaluation Board EVAL-ADT7470EB
Evaluation Board Data Sheet FEATURES On-board and remote temperature sensing On-board and remote fan control No calibration necessary Programmable over/under temperature limits USB serial interface Supports
Mini-TNC Rev 0711 is designed exclusively to work as an APRS TNC.
Fox Delta Amateur Radio Projects & Kits Mini-TNC Technical Details and Schematic: Mini-TNC - A 1200-Baud Packet TNC Rev. 0711 Completed Mini-TNC: Mini-TNC Rev 0711 is designed exclusively to work as an
Evaluate: MAX14589E/MAX14594E/ MAX MAX14589E/MAX14594E/ MAX14689 Evaluation Kits. Features and Benefits. General Description.
Evaluation Kits General Description The MAX14589E/MAX14594E/ evaluation kits (EV kits) are fully assembled and tested circuit boards that demonstrate the functionality of the MAX14589E, MAX14594E, and
MAXREFDES24EVSYS User Manual
MAXREFDES24EVSYS User Manual Rev 1; 1/15 ADCLITE2 ANALOG SIGNAL CAPTURE GUI Windows PC REFDES24 4-CHANNEL ANALOG OUTPUT GUI 20 30VDC (>150mA) MAXREFDES24 MAX1659 LDO MAX17498 FLYBACK CONTROL MAX6126 VREF
Anadigm FPAA Solutions Training Class III
Anadigm FPAA Solutions Training Class III Agenda Learning Goals Evaluation board components Board architecture Power connection COM connection Output connection Development board Verify proper connection
Modtronix Engineering Modular Electronic Solutions SBC28DC. Single board computer for 28 pin DIP PICs
Modtronix Engineering Modular Electronic Solutions Single board computer for 28 pin DIP PICs Table of Contents 1 Introduction...2 2 Features...4 3 Expansion Connectors...5 3.1 Daughter Board Connectors...5
CPLD board datasheet EB
CPLD board datasheet EB020-00- Contents. About this document... 2 2. General information... 3 3. Board layout... 4 4. Testing this product... 5 5. Circuit description... 6 Appendix Circuit diagram Copyright
Summary. Introduction
A 2 B - I 2 S MODULE - MODULE EVM SYSTEM A 2 B - I 2 S MODULE Summary SUPPORTS ANALOG DEVICES Off the shelf module for A 2 B interfacing to I 2 S and I 2 C devices Based on Analog Devices newest AD2428W
V1BOOST-STEPPER Unipolar Stepper Motor BoosterPack for the MSP430 LaunchPad. User s Guide
V1BOOST-STEPPER Unipolar Stepper Motor BoosterPack for the MSP430 LaunchPad User s Guide Revised July 2012 CONTENTS 1 Introduction... 3 1.1 Overview... 3 1.2 Features... 3 1.3 Additional Information...
Images Scientific OWI Robotic Arm Interface Kit (PC serial) Article
Images Scientific OWI Robotic Arm Interface Kit (PC serial) Article Images Company Robotic Arm PC Interface allows real time computer control and an interactive script writer/player for programming and
A Programmer for the 68HC705C8 MicroController Figure 1 PROG05 As Built PROG05 User Guide Version C1 Page 1 of 14
A Programmer for the 68HC705C8 MicroController Figure 1 PROG05 As Built PROG05 User Guide Version C1 Page 1 of 14 Table of Contents midon design 1. Introduction...3 2. Description...4 3. Construction...5
MAX4899AE Evaluation Kit. Evaluates: MAX4899AE/MAX4899E
19-4025; Rev 0; 1/08 General Description The MAX4899AE evaluation kit (EV kit) provides a proven design to evaluate the MAX4899AE USB 2.0 high-speed, fault-tolerant 4:1 multiplexer. The EV kit routes a
LOW ENERGY ANDROID GAMEPAD. Project Proposal
LOW ENERGY ANDROID GAMEPAD Project Proposal Marty Lewis Andrzej Forys Table of Contents Introduction 3 Implementation 4 Target Platform and Wireless Medium 4 Hardware.. 5 Software... 7 Interface Specifications
Bolt 18F2550 System Hardware Manual
1 Bolt 18F2550 System Hardware Manual Index : 1. Overview 2. Technical specifications 3. Definition of pins in 18F2550 4. Block diagram 5. FLASH memory Bootloader programmer 6. Digital ports 6.1 Leds and
QUASAR PROJECT KIT # ATMEL AVR PROGRAMMER
This kit is a simple but powerful programmer for the Atmel AT90Sxxxx ( AVR ) family of microcontrollers. The Atmel AVR devices are a low-power CMOS 8-bit microcontroller using a RISC architecture. By executing
Future Technology Devices International
Future Technology Devices International Datasheet UMFT51AA 8051 Compatible Module UMFT51AA is an FT51A DIP module that is compatible with an 8051 microcontroller. 1 Introduction 1.1 Features The UMFT51AA
CPLD board datasheet EB
CPLD board datasheet EB020-00-3 Contents. About this document... 2 2. General information... 3 3. Board layout... 4 4. Testing this product... 5 5. Circuit description... 6 Appendix Circuit diagram Copyright
Contents. The USB Logic Tool... 2 Programming... 2 Using the USB Logic Tool... 6 USB Logic Tool Features... 7 Device Hardware...
USB Logic Tool Contents The USB Logic Tool... 2 Programming... 2 Using the USB Logic Tool... 6 USB Logic Tool Features... 7 Device Hardware... 11 The USB Logic Tool The device is meant to be a prototyping
WT6510. USB Keyboard Controller (Mask ROM Type)
WT6510 USB Keyboard Controller (Mask ROM Type) REV 110 25, May, 2000 Weltrend Semiconductor, Inc All Rights Reserved 1!"#$%$&'%() &*$&+&& %,-/01 2-/01 // %,- //012,- //01 3!4,56!&&5 3!4,786!&&5 #9$,&:,
PVK40. User's manual. Feature Rich Development and Educational Kit for 40-pin Microchip PIC microcontrollers
PVK40 User's manual Feature Rich Development and Educational Kit for 40-pin Microchip PIC microcontrollers CONTENTS PVK40 3 On-board peripherals: 3 Power supply 4 Microcontroller 4 Reset circuitry 4 Oscilator
GRAVITECH GROUP
GRAVITECH.US uresearch GRAVITECH GROUP Description The I2C-ADC board is a 14-pin CMOS device that provides 8-CH, 12-bit of Analog to Digital Converter (ADC) using I 2 C bus. There are no external components
DIY KIT 123. ATMEL 89xxxx PROGRAMMER
INTRODUCTION This kit is a powerful programmer for the Atmel 8051 family of microcontrollers. It supports the following devices: 89C1051, 89C2051 and 89C4051 89C51, 89LV51 89C52, 89LV52 89C55, 89LV55 89S8252,
VINCULUM-BASED TEMPERATURE / HUMIDITY / VOLTAGE DATA LOGGER FEATURES:
DLP-VLOG *LEAD-FREE* VINCULUM-BASED TEMPERATURE / HUMIDITY / VOLTAGE DATA LOGGER FEATURES: Virtually Unlimited Data Storage Utilizing FTDI s New Vinculum USB Host IC Data Logged to USB Flash Drive Low-Power
BMC056. Utility Buttons Last updated
BMC056. Utility Buttons Last updated -0-209 If you have any questions, or need help trouble shooting, please e-mail Michael@Bartonmusicalcircuits.com I Controls/Inputs/Outputs II Schematic III Construction
Homework 5: Circuit Design and Theory of Operation Due: Friday, February 24, at NOON
Homework 5: Circuit Design and Theory of Operation Due: Friday, February 24, at NOON Team Code Name: Motion Tracking Laser Platform Group No.: 9 Team Member Completing This Homework: David Kristof NOTE:
EZ GUI Expansion Board Design Guide
www.teamfdi.com Rev. 1.1 Nov. 3, 2016 EZ GUI Expansion Board Design Guide Rev. 1.1 Nov. 3, 2016 P a g e 1 Table of Contents 1.0 Introduction... 3 2.0 Board Layout and Connector Orientation... 3 3.0 Power
N8VEM S-100 BACKPLANE VERSION 04 MAY 3, 2015 J.B.
N8VEM S-100 BACKPLANE VERSION 04 MAY 3, 2015 J.B. Background. This board is a copy of Andrew Lynch s Version 03 board (with 8 slots) but with added features. Added features: 9 SLOT Active Termination (copied
PIC Dev 14 Through hole PCB Assembly and Test Lab 1
Name Lab Day Lab Time PIC Dev 14 Through hole PCB Assembly and Test Lab 1 Introduction: The Pic Dev 14 is a simple 8-bit Microchip Pic microcontroller breakout board for learning and experimenting with
PICmicro Microcontroller Lite programmer datasheet
PICmicro Microcontroller Lite programmer datasheet Contents 1. About this document 2. General information 3. Board overview 4. Getting Started 5. Block schematic and description Appendix A. Circuit diagram
Applications Wi-Fi sensors Wi-Fi automation Internet of things Wi-Fi enterteinment Serial to Wi-Fi
Introduction Flyport is a revolutionary WiFi module based on the open source platform openpicus. Flyport is not simply a serial to WiFi solution, but a smart module with no need of an external host processor
Maxim Integrated Products 1
9-2479; Rev 0; 6/02 MAX28 Evaluation Kit General Description The MAX28 evaluation kit (EV kit) is designed to evaluate the MAX28. The MAX28 is a 2-bit, 2-channel (six differential-channel) ADC with a 2-wire
Features. General Description. Component List
General Description The MAX5217 evaluation kit (EV kit) demonstrates the MAX5217, 16-bit, single-channel, low-power, buffered voltage-output DAC. The IC comes in an 8-pin µmax package. The EV kit provides
+Denotes lead(pb)-free and RoHS compliant. C76, C77, C83 C86
19-5061; Rev 0; 11/09 MAX11046 Evaluation Kit General Description The MAX11046 evaluation kit (EV kit) provides a proven design to evaluate the MAX11046 8-channel, 16-bit, simultaneous-sampling ADC. The
Maxim Integrated Products 1
19-2467; Rev 0; 4/02 MAX1236 Evaluation Kit General Description The MAX1236 evaluation kit (EV kit) is designed to evaluate the MAX1236. The MAX1236 is a 12-bit, four-channel (two differential-channel)
IOCards USB Axes Manual. Date:15/03/12 Rev.:2.0
Date:15/03/12 Rev.:2.0 Index: IOCARDS USB AXES MANUAL... 1 INDEX:... 2 INTRODUCTION:... 3 USBAXES:... 3 Outline and components:... 3 Description of connectors:... 3 CONNECTION OF THE PUSHBUTTONS:... 3
Group 10 Programmable Sensor Output Simulator Progress Report #2
Department of Electrical Engineering University of Victoria ELEC 499 Design Project Group 10 Programmable Sensor Output Simulator Progress Report #2 March 5, 2005 Submitted by: Group No.: 10 Team: Exfour
LIN bus board datasheet EB
LIN bus board datasheet EB027-00-1 Contents 1. About this document... 2 2. General information... 3 3. Board layout... 4 4. Testing this product... 5 5. Circuit description... 7 Appendix 1 Circuit diagram
Zippy AVR Programmer. Zippy Programmer Features. Lomae Pty Ltd PO BOX 1297 Baulkham Hills, NSW,1755 ACN
PO BOX 97 ACN 0 80 56 Zippy AVR Programmer Introduction When Atmel released their 8 Bit AVR Microcontroller range, they also released a complete development system that allowed engineers to start developing
32 bit Micro Experimenter Board Description and Assembly manual
32 bit Micro Experimenter Board Description and Assembly manual Thank you for purchasing the KibaCorp 32 bit Micro Experimenter. KibaCorp is dedicated to Microcontroller education for the student, hobbyist
Table of Contents. Introductory Material
Table of Contents Introductory Material 0.1 Equipment Intoduction 1 breadboard area stimulator board 2 The Board of Education The TDS 340 oscilloscope 0.2 Getting Started with the Micro-controller The
HFRD-26.0 Rev. 8; 11/08
Reference Design: HFRD-26.0 Rev. 8; 11/08 As of July, 2008 this reference design board is no longer available. Gerber files and schematics are available upon request. REFERENCE DESIGN GEPON SFF Host Board
Evaluation Board for AD5590 EVAL-AD5590
Evaluation Board for AD5590 EVAL-AD5590 FEATURES Full-featured evaluation board for the AD5590 USB interface PC software for register programming Various reference voltages available Standalone operation
Operating Hardware Manual
USB--IC Conversion Kit for HDJD-JD Operating Hardware Manual Introduction The USB--IC kit is a simple conversion board, which allows USB connectivity for existing Illumination & Color Management (ICM)
Thursday, September 15, electronic components
electronic components a desktop computer relatively complex inside: screen (CRT) disk drive backup battery power supply connectors for: keyboard printer n more! Thursday, September 15, 2011 integrated
Advance Robotics with Embedded System Design (ARESD)
Advance Robotics with Embedded System Design (ARESD) LEARN HOW TO: Use Arduino hardware &Arduino programming for microcontroller based hobby project development Use WinAVRcross compiler formicrocontroller
ZL10AVR. Versatile Evaluation Board for AVR Microcontrollers
Versatile Evaluation Board for AVR Microcontrollers Thank you for buying ZL10AVR evaluation board. We hope that the power and quality of our tool allow you to appreciate the advantages of AVR microcontrollers
Sidewinder Development Board rev 1.0
33 Sidewinder Development Board rev 1.0 Features Altera MAX V CPLD 5M160ZT100C5 JTAG programmable USB programmable USB powered 12 On board LEDs 10 on board switches 3 RGB LEDs One 40 pin expansion headers
MAX14535E Evaluation Kit. Evaluates: MAX14535E
19-4510; Rev 0; 3/09 General Description The MAX14535E evaluation kit (EV kit) demonstrates the MAX14535E double-pole/double-throw (DPDT) analog switch featuring negative signal capability, low onresistance
B1DIL. AVR32 USB Module. Rev. 1.0 Documentation Rev. 4. Reusch Elektronik Reusch Elektronik, Dipl.-Ing. (FH) Rainer Reusch
AVR32 USB Module Rev. 1.0 Documentation Rev. 4 Reusch Elektronik 2011 Reusch Elektronik, Dipl.-Ing. (FH) Rainer Reusch www.reusch-elektronik.de http://products.reworld.eu/b1dil.htm File: _Manual Created:
16 CHANNEL USB GPIO MODULE
16 CHANNEL USB GPIO MODULE WWW.NUMATO.COM Table of Contents 1. Introduction 2. Electrical Specification 3. I/O Details and Dimensions 4. Using the Module 5. Command Reference 6. Frequently Asked Questions
Maxim Integrated Products 1
19-4581; Rev 0; 4/09 MAX4989 Evaluation Kit General Description The MAX4989 evaluation kit (EV kit) provides a proven design to evaluate the MAX4989 Hi-Speed 2-of-4 USB 2.0 crosspoint switch. The EV kit
Slick Line Acquisition System Manual
SCIENTIFIC DATA SYSTEMS, INC. SLICK LINE ACQUISITION BOX Slick Line Acquisition System Manual This document contains proprietary information. Copyright 2005 Scientific Data Systems, Inc. All rights reserved.
Web Site: Forums: forums.parallax.com Sales: Technical:
Web Site: www.parallax.com Forums: forums.parallax.com Sales: sales@parallax.com Technical: support@parallax.com Office: (916) 624-8333 Fax: (916) 624-8003 Sales: (888) 512-1024 Tech Support: (888) 997-8267
BMC24. MIDI TO GATE CONVERTER DOCUMENTATION. This documentation is for use with the "Euro Style" bottom board.
BMC24. MIDI TO GATE CONVERTER DOCUMENTATION. This documentation is for use with the "Euro Style" bottom board. A. USING THE MIDI TO GATE CONVERTER B. PARTS LIST C. BUILDING INSTRUCTIONS D. SCHEMATICS Revision.
PICado Alpha Development Board V1.0
V1.0 Bluetooth Transceiver Module HC-05 Four onboard FET power output stage 34 freely assignable I/O pins ICSP interface 2015 Jan Ritschard, All rights reserved. V1.0 Table of Contents 1. Introduction...
INSTALL.EXE. Maxim Integrated Products 1
9-258; Rev 0; 9/02 MAX06 Evaluation Kit General Description The MAX06 evaluation kit (EV kit) is designed to evaluate the MAX06. The MAX06 is an 8-bit four-channel (two-differential-channel) ADC with a
12v Power Controller Project Board
12v Power Controller Project Board 12 Volt Power Controller Introduction This board provides three functions... DC power gate Low voltage disconnect Voltage / current display The typical usage for this
Introduction to Microcontroller Apps for Amateur Radio Projects Using the HamStack Platform.
Introduction to Microcontroller Apps for Amateur Radio Projects Using the HamStack Platform www.sierraradio.net www.hamstack.com Topics Introduction Hardware options Software development HamStack project
Team Gnomes Presents. P38X9-WXZZZ45397ERV.JAS95_MGD A Black Box solution to turning old monitors into digital picture frames
Team Gnomes Presents P38X9-WXZZZ45397ERV.JAS95_MGD A Black Box solution to turning old monitors into digital picture frames Outline of Presentation Team member introduction Overview of Project Block Diagram
U6DIL. AVR USB Module. Rev. 1.1 Documentation Rev. 18. Reusch Elektronik Reusch Elektronik, Dipl.-Ing. (FH) Rainer Reusch
AVR USB Module Documentation Rev. 18 2011, Dipl.-Ing. (FH) Rainer Reusch www.reusch-elektronik.de http://products.reworld.eu/u6dil.htm File: _Manual Created: 2011-02-22 Changed: 2011-03-31 Table of Contents