STRICKER MODULAR DOOR CONTROL SMT 750 RELIABLE ELECTRONICS FOR STABLE OPERATION AND MAXIMUM EASE OF USE

Transcription

1 STRICKER MODULAR DOOR CONTROL SMT 750 RELIABLE ELECTRONICS FOR STABLE OPERATION AND MAXIMUM EASE OF USE

2 RELIABLE ELECTRONICS AND MAXIMUM EASE OF USE OUR CONSULTANTS ARE AT YOUR SERVICE We are happy to answer all your questions about the Stricker Control SMT 750 and all other door system products. Feel free to contact our consultants. POSTAL CODE 1-5 AND BENELUX COUNTRIES POSTAL CODE 6-0 AND ABROAD The modern door system only fulfills its purpose 100 percent when it is based on an ingenious control system. To ensure that it best fits your individual requirements and at the same time functions exactly according to our own ideas, we have taken the matter into our own hands. The Stricker Control SMT 750 that we have developed for highspeed doors is far more stable than conventional solutions. It operates reliably, the range of functions is specially designed for door systems and the handling is easy and straightforward. The Stricker Control SMT 750 not only meets the highest standard requirements, but also conforms to all current legal directives. Our Stricker Control SMT 750 is suitable for use with new door systems, but can also be easily retrofitted to models from other manufacturers. Thomas Musekamp Northern Germany/Benelux Phone Fax Henning Suuck Northern Germany/Benelux Phone Fax Ralf Mertens Southern Germany/Abroad Phone Fax Florian Thier Southern Germany/Abroad Phone Fax For further information about our Stricker Control and all other products please visit

3 DESIGN OF THE CONTROL The SMT 750 is composed of a control power module (CPM) and an operating module (OM). The operating module of the SMT 750 may be integrated in the cover of the control power module, but is also available as a separate component, for example, for integration in the guide rail of the door. The control power module can be mounted to the drive using available optional adapters. If the control functions of the control should be available on both sides of a door, another operating module can be connected to the control power module without any problem using the CAN-bus system architecture of the SMT 750. SMT 750 BENEFITS Modular, stable and versatile ease of use and programming The modular door control of Stricker is designed for use with your motor-driven, industrially used door. The SMT 750 takes care of a number of important tasks. This includes the control of the drive and the brake as well as the communication with the position sensor and the associated position evaluation of the door. Furthermore, the SMT 750 monitors and evaluates all connected safety elements. high stability and functionality control unit and control panel can be installed in physically separated locations the control can be easily retrofitted to models of other manufacturers designed for use with dynamically operated section doors and other door systems Control power module with separate operating module mounted to the drive Control power module with integrated operating module In addition, the SMT 750 meets the requirements of many different users and thus functions as the central interface for the use of your door for the operator who operates the door daily and the technician, who carries out maintenance on a regular basis. also light grids, RFID systems etc. can be operated with the control all standard requirements and current legal guidelines are met or exceeded the operator module also serves as a traffic light for increased safety THE CONTROL POWER MODULE Function and performance logic of the SMT 750 are combined in the control power module. The connecting terminals are removable, colored-coded and labeled according to function for an easier connection of the components. To ensure better safety, separate areas for high and low voltage are provided.

4 THE OPERATING MODULE The control can be operated and programmed using the OPEN, STOP and CLOSE button. Three capacitive buttons ensure easy and straightforward operation. They work without a pressure point and react merely to the proximity of the finger. Thus, for example, constant putting on and taking off work gloves can be avoided. The expected feedback from actuating a button occurs via a yellow background illumination. The red and green keyboard illumination serves as a traffic light for increased safety. The display shows operating and error messages. Display STOP button OPEN button CLOSE button Supply voltage and external consumers CEE-coupling (blue) Supply feed lines (on site) 1~230 V AC ±15 %, 50 Hz to 60 Hz; fuse protection of 16 A, k-characteristic 2 outputs for external consumers 230 V External consumer 230 V Output voltage 230 V AC ±15 %, 50 Hz to 60 Hz; output current maximum 1 A; output power max. 230 W External consumer 24 V Motor, brakes and position sensor connections 2 outputs for external consumers 24 V Output voltage 24 V DC ±5 % (at 230 V nominal voltage); output current maximum 1 A; output power max. 50 W 1 connection for three-phase motors Motor connection Output power 0.75 kw (at 230 V nominal voltage); output current maximum 5 A, short-term overload to 15 A for max. 500 ms, 22 A for max. 150 ms and 25 A for max. 100 ms; duty cycle of the motor (continuous energisation) maximum 80 % FUNCTIONAL CHARACTERISTICS conforms to the new EU Machinery Directive (2006/42/EC) factory pre-configured, parameters can easily be adjusted via laptop or manually control unit with compact dimensions (20 cm height, 40 cm width and 10 cm depth) operating module IP 67 no emergency stop is needed anymore compliance with the ASR 1.7 TECHNICAL SPECIFICATIONS Environmental requirements Operation 0 50 c Functional reliability c Storage c Humidity % rh, non-condensing Control power module Housing version Die-cast aluminum housing painted RAL 7001 Protection type IP x 360 x 90 mm without cable glands Dimensions (w x h x d) 195 x 360 x 90 mm including cable glands Weight approx. 5 kg Operating module Housing version Protection type Dimensions (w x h x d) Installation depth Weight Plastic housing ral 7016 with operating foil and encapsulated electronics IP67 75 x 126 x 26 mm 20 mm approx. 0.5 kg Break connection Position sensor connections Safety inputs Emergency open Security contact system Safety light grid Inputs and outputs Inputs Relay outputs 1 connection for work and fail-safe brakes Electronically integrated rectifier Nominal capacity of the brake 29 W / 32 W; output voltage 102/104 V DC ; output current 0.27 A / 0.28 A (at 104 V), maximum 1 A 1 rs485 interface for digital limit switches type A and type B Nominal output voltage 12 V DC ±5 % (at 230 V supply voltage); output current maximum 100 ma; output power max W 3 inputs with the function emergency open ; switching threshold high 16 V, low switching threshold 5 V; input current 50 ma 1 input with the function STOP/OPEN for opto-electronic safety strips Nominal input voltage 12 V; switching threshold high 10 V, low switching threshold 3 V; input current up to 20 ma; Frequency 1 khz; sampling frequency 5 khz 1 input with the function STOP/OPEN ; switching threshold high 16 V, low switching threshold 5 V; input current 15 ma ±5 ma; test input GND 6 programmable inputs for sensors with potential-free contact ; switching threshold high 16 V, low switching threshold 5 V; input current 15 ma ±5 ma 3 programmable relay outputs Switching voltage (AC) nominal 230 V, maximum V; switching voltage (AC1) nominal 1 A, maximum 2 A; switching capacity (AC1) nominal 230 W, maximum 530 W Switching voltage (DC) nominal 24 V, maximum 25 V; switching voltage (DC1) nominal 1 A, maximum 2 A; switching capacity (DC1) nominal 24 W, maximum 50 W Conformity Machinery Directive 2006/42/EC EN ISO / EN / EN / EN / EN EMC Directive 2004/108/EC EN / EN / EN / EN Low Voltage Directive 2006/95/EC EN / EN RoHS II 2011/65/EU EN Approval Type examination

5 Stricker GmbH & Co. KG An der Kleimannbrücke Münster Phone: Fax: torsysteme@stricker.ms