AVG-UDA2. Features. 2 simultaneous HDMI outputs. Supports Hot-plugging. Compliant with HDMI 1.4, able to transmit 1080p 3D& 4K signals

Transcription

1 Features The AVG-UDA2 is a HDMI splitter with the capability to transmit a HDMI or DVI source to 2 displays synchronously. 2 simultaneous HDMI outputs Supports Hot-plugging Compliant with HDMI 1.4, able to transmit 1080p 3D& 4K signals Transmits 1080p HDMI up to 15m High bandwidth: 10.2Gbps HDCP compliant Auto-identify input resolution Supports EDID management, automatically adopts the lowest compatible resolution when connecting several displays Intuitive indicator for connection status & input HDCP compliance status

2 PLEASE READ THIS PRODUCT MANUAL CAREFULLY BEFORE USING THIS PRODUCT. This manual is only for operation instruction only, and not to be used in a maintenance capacity. The functions described in this version are current till March Any changes of functions and operational parameters will be updated in future manual versions. Please refer to your dealer for the latest product details. Version 1.0 1/3/15

3 SAFETY OPERATION GUIDE In order to guarantee the reliable operation of the equipment and safety of the user, please abide by the following procedures in installation, use and maintenance: 1. The system must be earthed properly. Please do not use two blade plugs and ensure the AC power supply ranges from 100v to 240v and from 50Hz to 60Hz. 2. Do not install the switcher in an environment where it will be exposed to extreme hot or cold temperatures. 3. This unit will generate heat during operation, please ensure that you allow adequate ventilation to ensure reliable operation. 4. Please disconnect the unit from mains power if it will be left unused for a long time. 5. Please DO NOT try to open the casing of the equipment, DO NOT attempt to repair the unit. Opening the unit will void the warranty. There are high voltage components in the unit and attempting to repair the unit could result in serious injury. 6. Do not allow the unit to come into contact with any liquid as that could result in personal injury and product failure.

4 TABLE OF CONTENTS Introduction... 1 Introduction to the AVG-UDH Features Whats in the Box... 2 Product Appearance of the AVG-UDH Front Panel Rear Panel System Connection... 4 Usage Precautions System Diagram Connection Procedure Application Firmware Upgrade Specification... 5 Supported Video Input Formats... 6 Panel Drawing... 7 Troubleshooting & Maintenance... 8

5 1. Introduction 1.1. Introduction to the AVG-UDA2 The AVG-UDA2 is a HDMI splitter with the capability to transmit a HDMI or DVI source to 2 displays simultaneously. Compliant with HDMI 1.4& HDCP1.4 the 4K HDMI Splitter 1x2 provides comprehensive resolution capacities up to 4K & 1080p 3D. It capable automatically recognizes the resolution and HDCP compliant status of the input signal. The Input signal is equalized for robust transmission with its EDID Management. The 4K HDMI Splitter 1x2 supports convenient online updates through its USB port. 1.2 Features 2 simultaneous HDMI outputs Supports Hot-plugging Compliant with HDMI 1.4, able to transmit 1080p 3D& 4K signals Transmits 1080p HDMI up to 15m High bandwidth: 10.2Gbps HDCP compliant Auto-identify input resolution Supports EDID management, automatically adopts the lowest compatible resolution when connecting several displays Intuitive indicator for connection status & input HDCP compliance status Convenient online firmware update 2. Whats in the Box 1 x 4K HDMI Splitter 1x2 2 x Mounting ears (separate from 4K HDMI Splitter 1x2) 4 x Screws 4 x Plastic cushions 1 x Power Adapter (DC 5V 1A) 1 x User Manual Note: Please confirm if the product and the accessories are all included, if not, please contact your dealer.

6 3. Panel Description 3.1 Front Panel No. Name Description 1 Power indicator Illuminates red once powered on Indicates the HDCP compliant status of the input signal Input HDCP Iluminates green when the input signal has HDCP 2 compliant Blinks green when the input signal does not have Indicator HDCP Remains off when there is no input signal 3 Output signal Illuminates green when there is HDMI output, corresponds Indicators with HDMI OUTPUT 1~2 separately 4 FIRMWARE USB port, used for firmware updates Note: Output HDCP compliant status depends on input signal. When the input signal is with HDCP, then output signal is with HDCP and vice versa.

7 3.2 Rear Panel No. Name Description 1 IN HDMI input port. connect with HDMI or DVI source device such as a DVD 2 OUT HDMI output ports, connect to HDMI displays, automatically captures the input resolution 3 DC 5V Power socket, plug a DC 5V power adapter into this socket Note: a) Pictures shown in this manual are for reference only, different models may vary slightly. b) HDMI signal contains both HDMI video signal and embedded audio signal (PCM, Dolby Digital, DTS, DTS-HD), while the DVI signal contains only a video signal. c) 4K HDMI Splitter 1x2 is capable of switching input signal format according to the displays. For example, when the input signal is HDMI and the display can only support a DVI signal, the 4K HDMI Splitter 1x2 will switch the signal into DVI format. d) EDID Management: automatically manages the output signal (e.g. output resolution) to fit all displays. 4. System Connection 4.1 Usage Precautions 1) System should be installed in a clean environment with temperature and humidity maintained to within equipment specification. 2) All of the power switches, plugs, sockets and power cords should be insulated and safe. 3) All devices should be connected before power on.

8 4.2 System Diagram The following diagram illustrates typical input and output connections that can be utilized with 4K HDMI Splitter 1x2:

9 AVG-UDA2 4.3 Connection Procedures Step1. Connect a HDMI/ DVI source device (e.g. Blue-ray DVD) to the HDMI INPUT socket of 4K HDMI Splitter 1x2 with HDMI cable. Step2. Connect HDMI displays to HDMI OUTPUT sockets of 4K HDMI Splitter 1x2 with HDMI cable. Step3. Plug a DC 5V power adapter to the power port of 4K HDMI Splitter 1x2. Note: All the ports support hot-plug. It s important to know that hot plugging a display may result in splash screen at output ends. 4.4 Application 4K HDMI Splitter 1x2 has a good application in various installations, such as computers, monitoring, conference rooms, big screen displaying, television, education, command & control centers, residential etc. 4.5 Firmware Upgrade 4K HDMI Splitter 1x2 boasts a USB port for online firmware upgrade. Follow these steps to upgrade firmware: Step1. Copy the latest upgrade file (.hex) to PC. Step2. Connect the USB ports of 4K HDMI Splitter 1x2 and the PC via USB cable. Step3. Launch the upgrade software by double-click the icon of EPFlash.exe, it will enter the upgrade interface shown as below: Step4. Select the right port number in the dropdown list of PORT, and click OpenFile to load the upgrade file. Click Start to start firmware upgrading.

10 5. Specification Video Input Input 1 HDMI Input Connector 1 female type A HDMI 1.4 Min/ Max Signal Level T.M.D.S. 2.9V~3.3V Input Impedance Differential 100Ω Video Output Output 2 HDMI Output Connector 1 female type A HDMI 1.4 Min/ Max Signal Level T.M.D.S. 2.9V~3.3V Output Impedance Differential 100Ω Video General Max data rate 10.2Gbit/s Max Resolution 4Kx2K, 1080P 3D@60Hz Max Pixel Clock 340MHz Gain 0dB HDCP Compliant with HDCP1.4 EDID In-built EDID management General Temperature -10 ~ +40 Reference Humidity Power Consumption Weight 10% ~ 90% 2.5 W Power DC 5V 1A 0.08kg Dimension (W*H*D) 100x 11x 70mm 5.1 Supported Input Video Formats Input Resolution HDMI DVI 720 x 480@60Hz 720 x 480I@30Hz 720 x 576@50Hz 720 x 576I@25Hz 1280 x720@50hz 1280 x720@60hz 1920 x 1080@25Hz 1920 x 1080@50Hz 1920 x 1080@60Hz 1920 x 1080I@25Hz 1920 x 1080I@30Hz 3840 x 2160@25Hz 3840 x 2160@30Hz 1080P 3D@60Hz Note: 4K HDMI Splitter 1x2 supports 4k& 3D HDMI signals, please adopt quality HDMI cables compliant with HDMI1.4 for better transmission when connecting 4K or 3D sources.

11 6. Panel Drawing

12 7. Troubleshooting & Maintenance Problems Causes Solutions Color loss or no video signal output in HDMI display No HDMI signal output in 4K HDMI Splitter 1x2 while local HDMI input is in normal working state The connecting cables may not be connected correctly or it may be broken. Check whether the cables are connected correctly and in working condition. Splash screen displayed on output devices Static becomes stronger when connecting the video connectors Poor quality of the connecting cable Bad grounding Change for another cable of good quality. Check the grounding and make sure it is connected well. If your problem persists after following the above troubleshooting steps, seek further help from authorized dealer or our technical support.