16-Channel Digital Input Termination Card 24Vdc

Size: px
Start display at page:

Download "16-Channel Digital Input Termination Card 24Vdc"

Transcription

1 TDI16BIA 16-Channel Digital Input Termination Card 24Vdc (TDI16BIA) Issue 3 October 2005 INTRODUCTION PURPOSE The TDI16BIA16-channel digital input termination card acts as an interface between the digital signalling devices in the field device and the digital input circuits of an SC300E chassis. It provides: DIN41612 connector for the field wiring Power supply inputs for the field devices Fuse protection for the field loops with local and remote indication of fuse failure Overvoltage and transient protection This document is intended to provide a general understanding of the function of the TAI16BIA, sufficient to enable basic maintenance operations to be effected in the field. ASSOCIATED DOCUMENTATION Reference Title MDI32BIS 32-Channel Digital Input Module User Manual PDD24 Power Distribution Panel User Manual

2 SPECIFICATION Model TDI16BIA Power supply inputs Has two separate connectors (FS1and FS2) for redundant dc power supplies. The positive supplies feed a common bus via auctioneering diodes. When auctioneering takes place outside the card, the required power may be supplied via a single connector. No. of digital input channels 16 Nominal field supply voltage Maximum field supply voltage Current rating Fuse in each positive line to field Chassis cable connector Field cable connector Fuse blown indication Transient suppression Safety ground terminal TS1 Overall size (mm) Overall size (inches) Weight 24Vdc 33Vdc 50mA per channel. NOTE: In normal operation when used with a Digital Input Module having a 10k ohm input resistance, the current in each channel will be 2.4mA with 24V field supply. 1A, fast acting, indicating 34 way DIN41612 DIN41612 Local: Fuse blown LED (one per card) Remote: Fuse blown alarm output (PL1) can be connected to Fuse blown LED on Power Distribution Panel (PDD24). A transient suppressor device between each field return line and a common 0V bus clamps the field return line voltage (with respect to 0V common) as follows: +37Vdc to 1mA (maximum for continuous overload) 69A maximum peak pulse current for 8ms to 20ms M3 threaded bush provision for a ring terminal. Allows the common 0V supply bus to be grounded via a 10k ohm resistor. Prevents the channels from floating if the card is disconnected from the chassis. 162L x 125W x 107H 6.4L x 4.9W x 4.2H 0.27kg 2 TDI16BIA October 2005 Issue 3

3 TDI16BIA 16-Channel D/I Termination Card 24Vdc ENVIRONMENTAL SPECIFICATIONS The maximum ambient temperature measured at the hottest point within the Triguard system shall not be greater than 60 degrees centigrade. Temperature operating: +5 C to +60 C Temperature storage: -25 C to +70 C Humidity: 5% to 95% non-condensing at ambient < 40 C The maximum ambient temperature measured at the hottest point within the Triguard system shall not be greater than 60 degrees centigrade. EMC/RFI Immunity: Tested and certified to IEC 1131-Part Vibration/Shock: Tested and certified to IEC 1131-Part Certification: General Certification: Ref. SC300E TMR Product Guide (ref ). TRANSPORT AND HANDLING The termination card must be transported and stored in its original packing material which should be retained for this purpose. TDI16BIA October 2005 Issue 3 3

4 TECHNICAL DESCRIPTION PHYSICAL The TDI16BIA comprises a PCB assembly mounted in a moulded carrier that can be snapped onto all commercially available styles of DIN mounting rail. Connection to the chassis backplane is via a multicore cable terminated at either end by a DIN41612 connector. Figure 2-2 shows the TDI16BIA with the DIN41612 connector attached and mounted on rail EN type NS 35/5. Figure 2-1 identifies the main components on the PCB. Figure 2-1 General view and component layout 4 TDI16BIA October 2005 Issue 3

5 TDI16BIA 16-Channel D/I Termination Card 24Vdc Figure 2-2 Leading dimensions and mounting schematic TDI16BIA October 2005 Issue 3 5

6 Figure 2-3 Circuit diagram showing a single channel 6 TDI16BIA October 2005 Issue 3

7 TDI16BIA 16-Channel D/I Termination Card 24Vdc EXTERNAL CONNECTIONS Fixed Terminal Field connector J2 Chassis connector J1 Field power supply inputs FS1 and FS2 Alarm output PL1 Ground terminal TS1 Details Connector, 34-way, DIN41612, female Connector, 34-way, DIN41612, female Header, 2-way, Molex Minifit Jr Header, 2-way, Molex KK Provision for M3 ring terminal THEORY OF OPERATION Figure 2-3 is a circuit diagram showing a typical digital input channel. Power supplies for the termination cards are normally provided by a Power Distribution Panel PDD24 which performs diode auctioneering of its dual redundant power supplies. Power for the digital input circuits (normally from the PDD24) is fed to input FS1 or FS2. Where the PDD24 is not used and dual supplies are required, these are connected to FS1 and FS2 respectively and auctioneered on the termination card by D17 and D18. Each digital input channel is powered via an indicating fuse from a common +ve bus. The fuse failed output from each fuse is connected to a common alarm bus. If any fuse fails, local indication is provided by the illumination of Fuse blown LED LD1. A signal to operate a remote alarm is available at Alarm output PL1. NOTE The PDD24 has a Fuse blown alarm indicator with provision for multiple inputs. This facility can be wired to provide fuse blown indication for an entire cabinet. The -ve bus may be grounded via TS1 if required, preventing the power supplies from floating when the chassis cable is disconnected. TDI16BIA October 2005 Issue 3 7

8 TRANSIENT SUPPRESSION A transient suppressor is fitted across each digital input channel input to the SC300E chassis. It provides a discharge path for transient energy pulses that may appear on the digital input line following lightning strikes etc. The suppressor is effectively a zener diode with a breakdown voltage just above that of the normal supply voltage. In normal operation, therefore, the suppressor does not conduct (apart from leakage current). In the presence of a transient pulse, zener breakdown occurs. The voltage developed across the suppressor varies to some extent with the pulse current and is known as the clamping voltage. The following characteristics are typical: Table 2-1. Transient suppressor characteristics Clamping voltage Pulse currents Pulse duration Comments +37V to +43V *1mA Continuous *Maximum current for continuous overload +70V **6gAmps 8 to 20µs **Maximum peak pulse current SUPPLEMENTARY INFORMATION Table 2-2 lists the digital input channel wiring connections and associated fuses for connectors J1 and J2. Pin J1-1a is connected to the +ve bus (Figure 2-3 ). Pins J1-1c and J2-1c are interconnected. J1/J2 pins other than J1-1a, J1-1c, J2-1c and those listed in Table 2-2 are not connected. 8 TDI16BIA October 2005 Issue 3

9 TDI16BIA 16-Channel D/I Termination Card 24Vdc Table 2-2. Digital input channel connections DIN41612 Connector J2 DIN41612 Connector J1 Channel Fused +ve Digital input Digital Chassis Fuse 1 supply to field d i J2-2a from field device J2-2c output to chassis J1-2a common return J1-2c F1 2 J2-4a J2-4c J1-4a J1-4c F2 3 J2-6a J2-6c J1-6a J1-6c F3 4 J2-8a J2-8c J1-8a J1-8c F4 5 J2-10a J2-10c J1-10a J1-10c F5 6 J2-12a J2-12c J1-12a J1-12c F6 7 J2-14a J2-14c J1-14a J1-14c F7 8 J2-16a J2-16c J1-16a J1-16c F8 g J2-18a J2-18c J1-18a J1-18c Fg 10 J2-20a J2-20c J1-20a J1-20c F10 11 J2-22a J2-22c J1-22a J1-22c F11 12 J2-24a J2-24c J1-24a J1-24c F12 13 J2-26a J2-26c J1-26a J1-26c F13 14 J2-28a J2-28c J1-28a J1-28c F14 15 J2-30a J2-30c J1-30a J1-30c F15 16 J2-32a J2-32c J1-32a J1-32c F16 TDI16BIA October 2005 Issue 3 g

10 SERVICING SCOPE The TDI16BIA contains all-passive circuitry that is extremely robust. Servicing operations will therefore not normally extend beyond the replacement of failed fuses. CAUTION Before replacing a failed fuse, ascertain the cause of failure, and take the appropriate remedial action. CONFIGURATION No configurable links. 10 TDI16BIA October 2005 Issue 3

11 TDI16BIA 16-Channel D/I Termination Card 24Vdc SERVICE SUPPORT SPARE PARTS Spare parts and technical advice can be obtained from your local area offices. LIST OF SPARES Circuit Ref. Part No. Details F1 to F A Indicating fuse 12 TDI16BIA October 2005 Issue 3

16-Channel Digital Input Termination Card 24Vdc

16-Channel Digital Input Termination Card 24Vdc TDI16AIA 16-Channel Digital Input Termination Card 24Vdc (TDI16AIA) Issue 3 October 2005 INTRODUCTION PURPOSE The TDI16AIA 16-channel digital input termination card acts as an interface between the digital

More information

16-Channel Input Digital Input Termination Card

16-Channel Input Digital Input Termination Card TDI16EIA 16-Channel Input Digital Input Termination Card (TDI16EIA) Issue 3 October 2005 Introduction Purpose The TDI16EIA 16-channel digital input termination card acts as an interface between the digital

More information

Chassis Power Supplies

Chassis Power Supplies PDC24 / PAC Chassis Power Supplies (PDC24 / PAC) Issue 3 October 2005 INTRODUCTION PURPOSE Two Power Supply Units (PSUs) provide a dual-redundant source of 5.4Vand 12Vdc onto the backplane for the modules

More information

32-Channel Analogue Input Module Differential Input

32-Channel Analogue Input Module Differential Input MAI32*AD 32-Channel Analogue Input Module Differential Input (MAI32*AD) Issue 4 October 2005 INTRODUCTION PURPOSE The Analogue Input Module provides up to 32, low voltage or current analogue input signals.

More information

Remote Bus Extender Slave Module

Remote Bus Extender Slave Module Triguard SC300E MRB01XS Remote Bus Extender Slave Module (MRB01XS) Issue 4 October 2005 INTRODUCTION AND TECHNICAL DATA PURPOSE A Remote Bus Extender Slave Module MRB01XS (Figure 1-1 ) is located in each

More information

De-multiplexed Display Driver. Revision 02. User Manual. TM117-DMX Motherboard Daughterboard

De-multiplexed Display Driver. Revision 02. User Manual. TM117-DMX Motherboard Daughterboard Triguard SC300E TM117-DMX 64 Channel De-multiplexed Display Driver Revision 02 008-5216-02 User Manual This manual covers the following items: Model Ref Part No for standard item. TM117-DMX -------------

More information

16-Channel Digital Output Module 120Vac/dc

16-Channel Digital Output Module 120Vac/dc Triguard SC300E MDO16FNS 16-Channel Digital Output Module 120Vac/dc (MDO16FNS) Issue 4 October 2005 INTRODUCTION PURPOSE The 120Vac/dc Digital Output Module MDO16FNS provides the output control interface

More information

AOZ8900. Ultra-Low Capacitance TVS Diode Array PRELIMINARY. Features. General Description. Applications. Typical Application

AOZ8900. Ultra-Low Capacitance TVS Diode Array PRELIMINARY. Features. General Description. Applications. Typical Application Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning. This device

More information

Operating Instructions

Operating Instructions Introduction To protect the signal lines of field devices and systems in the cabinet against lightning. Pepperl+Fuchs covers the complete range of Surge Protection Barriers. Housing types Depending on

More information

AOZ8101. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application

AOZ8101. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application Ultra-Low Capacitance TS Diode Array General Description The AOZ8101 is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning.

More information

INPAQ Global RF/Component Solutions

INPAQ Global RF/Component Solutions TVL SC7 4 AC Specification Product Name Series Part No Package Size Transient Voltage Suppressor TVS Series TVL SC7 4 AC SC7-6L TVL SC7 4 AC Engineering Specification 1. Scope TVL SC7 4 AC s are TVS arrays

More information

PDD-300 pulsed diode driver

PDD-300 pulsed diode driver rev 1.08 / 2019 02 13 PDD-300 pulsed diode driver User manual Warning! This equipment may be dangerous. Please read user manual before starting operations. Important note. Please measure output with adequate

More information

Surge Protection Devices Ex9UE2

Surge Protection Devices Ex9UE2 Surge Protection Devices Ex9UE2 Surge Protection Devices Type 2 (Class II, T2, C) Tested according to EN 61643-11 Maximum continuous operational voltage U c from 275 V up to 440 V AC Versions with 1+0,

More information

I/O Expansion Module Installation & Reference

I/O Expansion Module Installation & Reference Overview The In-Sight vision sensor supports up to ten discrete inputs and ten discrete outputs. Two inputs and two outputs are built-in to the In-Sight processor. The remaining eight inputs and outputs

More information

AOZ8102. Ultra-Low Capacitance TVS Diode Array. Features. General Description. Applications. Typical Application

AOZ8102. Ultra-Low Capacitance TVS Diode Array. Features. General Description. Applications. Typical Application Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from SD and lightning. This device incorporates eight surge

More information

TMP & TMPM Series, 4 to 60 Watt. Order code Output power max. Output Efficiency

TMP & TMPM Series, 4 to 60 Watt. Order code Output power max. Output Efficiency TMP & TMPM Series, 4 to 60 Watt Features Ultra compact, low profile plastic casing Fully encapsulated (pollution/dust) Single-, dual- and triple output models standard package versions: - Screw terminal

More information

SPM Series Plug-in Surge Protector Type 2/3 (Test Class II/III) Single & Three Phase Surge Arresters

SPM Series Plug-in Surge Protector Type 2/3 (Test Class II/III) Single & Three Phase Surge Arresters The SPM series of modular surge protection devices provides protection of equipment connected to incoming low voltage AC power supplies against the damaging effects of transient over voltages caused by

More information

TM3AI4 module TM3-4 analog inputs

TM3AI4 module TM3-4 analog inputs Characteristics module TM3-4 analog inputs Main Range of product Product or component type Range compatibility Analogue input number 4 Analogue input type Complementary Analogue input resolution Permissible

More information

digiclip Data sheet DF31CAN Special features B en

digiclip Data sheet DF31CAN Special features B en digiclip DF31CAN Data sheet Special features Digital amplifier for industrial automation tasks and production process monitoring 600 Hz CF measurement technology with TEDS sensor detection for SG full

More information

I R T Electronics Pty Ltd A.B.N. 35 000 83 575 6 Hotham Parade, ARTARMON N.S.W. 064 AUSTRALIA National: Phone: (0) 9439 3744 Fax: (0) 9439 7439 International: +6 9439 3744 +6 9439 7439 Email: sales@irtelectronics.com

More information

Allen-Bradley PLCs. 100 Programmable Controller Processor Unit -Catalog Nos LPI01, -LP102, -LP103, -LP104 SLC TM. The Unit

Allen-Bradley PLCs. 100 Programmable Controller Processor Unit -Catalog Nos LPI01, -LP102, -LP103, -LP104 SLC TM. The Unit PRODUCT DATA SLC TM 100 Programmable Controller Processor Unit -Catalog Nos. 1745-LPI01, -LP102, -LP103, -LP104 The SLC 100 programmab/e Contro"er The SLC 100 Programmable Controller is easy to program,

More information

AOZ8882. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application

AOZ8882. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application Ultra-Low Capacitance TS Diode Array General Description The AOZ8882 is a transient voltage suppressor array designed to protect high speed data lines such as HDMI, MDDI, USB, SATA, and Gigabit Ethernet

More information

OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m

OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Main Range of product Product or component type Integrated connection type Mar 31, 2018 Modicon OTB I/O distributed module Discrete

More information

digiclip Data sheet DF31DP Special features B en

digiclip Data sheet DF31DP Special features B en digiclip DF31DP Data sheet Special features Digital amplifier for industrial automation tasks and production process monitoring 600 Hz CF measurement technology with TEDS sensor detection for SG full bridges

More information

Zener Barriers Bulletin 937Z

Zener Barriers Bulletin 937Z Technical Data Zener Barriers Bulletin 937Z Topic Page Introduction 2 Mounting 2 Housing 3 Operating Principle 3 Specifications 6 Introduction Allen-Bradley Zener barriers are a cost-effective solution

More information

KEPCO GIVES YOU ZERO-UP PROGRAMMABILITY IN AN AFFORDABLE POWER MODULE

KEPCO GIVES YOU ZERO-UP PROGRAMMABILITY IN AN AFFORDABLE POWER MODULE 146-1915 More than switch mode boxes with wide-range a-c/d-c input power factor correction and current-share capacity... KEPCO GIVES YOU ZERO-UP PROGRAMMABILITY IN AN AFFORDABLE POWER MODULE RKW 300W 92

More information

INPAQ. Specification TVN AB0. Product Name Transient Voltage Suppressor Series TVS Series Part No TVN AB0 Size EIA 0201

INPAQ. Specification TVN AB0. Product Name Transient Voltage Suppressor Series TVS Series Part No TVN AB0 Size EIA 0201 TVN 0201 01 AB0 Specification Product Name Transient Voltage Suppressor Series TVS Series Part No TVN 020101 AB0 Size EIA 0201 TVN 0201 01 AB0 Engineering Specification 1. Scope TVN 0201 01 AB0 is a TVS

More information

AOZ8234. Four-line TVS Diode

AOZ8234. Four-line TVS Diode AOZ8 Four-line TS Diode General Description The AOZ8 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and ESD. This state-of-the-art device utilizes

More information

F101, F102, F104. Relcom Installation Instructions. Fieldbus Power Supply F101-PS

F101, F102, F104. Relcom  Installation Instructions. Fieldbus Power Supply F101-PS F101, F102, F104 Fieldbus Power Supply F101-PS Installation Instructions Relcom www.mtl-fieldbus.com CONTENTS PAGE 1 OVERVIEW 2 2 DESCRIPTION 2 3 COMPONENTS AND ACCESSORIES 2 4 MECHANICAL 3 4.1 Mounting

More information

TM3TI4 module TM3-4 inputs temperature

TM3TI4 module TM3-4 inputs temperature Characteristics module TM3-4 inputs temperature Main Range of product Product or component type Range compatibility Analogue input number 4 Analogue input type Complementary Analogue input resolution Permissible

More information

MODULES FOR SAFETY AND MONITORING

MODULES FOR SAFETY AND MONITORING MODULES FOR SAFETY AND MONITORING Woertz AG Hofackerstrasse 47, P.O. Box 948, CH-43 Muttenz, Switzerland Tel. ++4 6 / 466 33 33, Fax ++4 6 / 46 96 06 http://www.woertz.ch Woertz-USA 5 Discovery Drive,

More information

OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m

OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m Product datasheet Characteristics OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Complementary Concept Port Ethernet Bus length Main Number of devices per segment 0...256 Communication

More information

Overvoltage Protection Devices

Overvoltage Protection Devices Siemens AG 2010 Overvoltage Protection Devices /2 Introduction /3 Lightning Arresters, Type 1 /5 Combination Surge Arresters, Type 1 and Type 2 /7 Surge Arresters, Type 2 /11 Surge Arresters, Type 3 /12

More information

Safety Standards. Model Number: Unit Weight:

Safety Standards. Model Number: Unit Weight: MEA-250A24C Highlights & Features Meet Efficiency Level VI Safety Approvals to IEC 60601-1 3.1 Ed. & IEC 60950-1 Compliant with IEC 60601-1-2 3 th and 4 th Ed. Requirements IP22 ingress protection rating

More information

1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors

1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors 1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors CM1210 Features 1,2,4 and 8 channels of ESD protection Very low loading capacitance (1.0pF typical) ±6 kv ESD protection per channel (IEC 61000-4-2

More information

Priva Blue ID Digital input module DI4/DI8/DI16

Priva Blue ID Digital input module DI4/DI8/DI16 Priva Blue ID Digital input module Modular design An Priva Blue ID DI4 Digital input module, Priva Blue ID DI8 Digital input module or Priva Blue ID DI16 Digital input module are used to take status and

More information

SPM Series Plug-in Surge Protection

SPM Series Plug-in Surge Protection SPM Series Plug-in Surge Protection The SPM series of modular surge protection devices provides protection of equipment connected to incoming low voltage AC power supplies against the damaging effects

More information

Trusted 40 Channel Digital Input Versatile FTA

Trusted 40 Channel Digital Input Versatile FTA PD-T8843 Trusted Trusted 40 Channel Digital Input Versatile FTA Product Overview The Trusted 40 Channel Digital Input Versatile Field Termination Assembly (VFTA) T8843 is designed to act as the main interface

More information

Series AME5-CJZ 5 Watt AC-DC / DC-DC Converter

Series AME5-CJZ 5 Watt AC-DC / DC-DC Converter Click on Series name for product info on aimtec.com FEATURES: I/O Isolation 000V Continuous Short circuit protection Operating Temp: -2 C to 0 C Energy Star compliant Input: -26V, -6Hz, or 20-0VDC pact

More information

ENGINEERING SPECIFICATION SHEET SPEC. Revision History

ENGINEERING SPECIFICATION SHEET SPEC. Revision History SPEC. Revision History Revision Change Information Date No. Description Current version 2010/08/01 1 New revision Initial 2011-1-25 2 Fuse is changed T4.0A 2.0 2011-4-1 3 Add AC adapter external dimension

More information

NMID. Remote control. SAPIM I/O number. SAPIM I/O number NBRN (RS485) ZM100. Relay, 24 VDC - + UO07 UI11 UI10 UI09 UI08 UI07 UI06 UI05 UI04 UI03 UI02

NMID. Remote control. SAPIM I/O number. SAPIM I/O number NBRN (RS485) ZM100. Relay, 24 VDC - + UO07 UI11 UI10 UI09 UI08 UI07 UI06 UI05 UI04 UI03 UI02 1/8 NRK16/A, NRK16-B/A, (NRK16-T /A, NRK14-T /A, NRK16-WEB/A) Control and interlock devices with pre-programmed system-specific application modules The controllers may be used as stand-alone control and

More information

NMEA Expander. Operation And. Installation Manual

NMEA Expander. Operation And. Installation Manual NMEA Expander Operation And Installation Manual XXXXXX_20130331 Revision B0 Syberg Maritim 1. OPERATION AND CONFIGURATION... 3 SYSTEM SUMMARY... 3 INPUT POWER SUPPLY, D CONFIGURATION... 4 INPUT POWER SUPPLY,

More information

Click Desktop Kit. Click Desktop Kit

Click Desktop Kit. Click Desktop Kit Click Desktop Kit Click Desktop Kit The Click Desktop Kit is a desktop-mounted set that gives you the building blocks necessary to work with your Click modules at your computer, whether you re testing

More information

INSTRUCTION SHEET. Eaton Logic Controller ELCB Controllers

INSTRUCTION SHEET. Eaton Logic Controller ELCB Controllers 2010-12-10 5011699201-PBB1 Eaton Logic Controller ELCB Controllers INSTRUCTION SHEET [Applicable Controllers] ELCB-PB10 ELCB-PB14 ELCB-PB20 ELCB-PB30 ELCB-PB40 IL05001005E 002-1310020-02 Thank you for

More information

TM3TI8T module TM3-8 inputs temperature

TM3TI8T module TM3-8 inputs temperature Characteristics module TM3-8 inputs temperature Main Range of product Product or component type Range compatibility Analogue input number 8 Analogue input type Complementary Analogue input resolution Input

More information

OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m

OTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Complementary Concept Port Ethernet Bus length Main Number of devices per segment 0...256 Communication service Web services Discrete

More information

Industrial Power Supplies

Industrial Power Supplies 75-600 Watt Features Switch mode power supplies for DIN-rail mounting 4 power ranges with 3, 6, 12 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise EMI complies

More information

DALI Bus Power Supply. DLP- 04 series VAC

DALI Bus Power Supply. DLP- 04 series VAC 0 05 VAC Ⅱ,. { File Name: DLP-0-SPEC 08-08-6 SPECIFICATION MODEL DLP-0R DLP-0L OUTPUT RATED POWER SETUP, RISE TIME HOLD UP TIME (Typ.) 70ms/0VAC 6ms/5VAC at full load VOLTAGE RANGE 90 ~ 6VAC 0 ~ 70VDC

More information

TM3TM3 module TM3-2 temperature inputs and 1 analog output

TM3TM3 module TM3-2 temperature inputs and 1 analog output Characteristics module TM3-2 temperature inputs and 1 analog output Main Range of product Product or component type Range compatibility Analogue input number 2 Analogue input type Analogue output number

More information

SPM Series. Plug-in Surge Protection

SPM Series. Plug-in Surge Protection SPM Series Plug-in Surge Protection The SPM series of modular surge protection devices provides protection of equipment connected to incoming low voltage AC power supplies against the damaging effects

More information

NI REM Remote I/O Overview DATASHEET. Digital Output Module for Remote I/O

NI REM Remote I/O Overview DATASHEET. Digital Output Module for Remote I/O DATASHEET NI REM-11178 Digital Output Module for Remote I/O Short circuit and overload protection Drives up to 500 ma per channel (up to 8A per module) Spring-terminal connectors allow fast wiring without

More information

ABL8BBU24200 battery control module V DC - 24 V - 20 A - for regulated SMPS

ABL8BBU24200 battery control module V DC - 24 V - 20 A - for regulated SMPS Characteristics battery control module - 24..28.8 V DC - 24 V - 20 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Phaseo Battery

More information

Micro Contactor MA Series

Micro Contactor MA Series Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC

More information

Industrial Power Supplies

Industrial Power Supplies 50-600 Watt Features Switch mode power supplies for DIN-rail mounting 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise

More information

ABL8BBU24400 battery control module V DC - 24 V - 40 A - for regulated SMPS

ABL8BBU24400 battery control module V DC - 24 V - 40 A - for regulated SMPS Characteristics battery control module - 24..28.8 V DC - 24 V - 40 A - for regulated SMPS Main Range of product Product or component type Input voltage Output voltage Maximum output current Complementary

More information

Series AMES40-MAZ 40 Watt AC-DC / DC-DC Converter

Series AMES40-MAZ 40 Watt AC-DC / DC-DC Converter FEATURES: Click on Series name for product info on aimtec.com Models Single output Model (VAC/Hz) (VDC) Output Voltage (V) Output Current max (A) Efficiency (%) AMES40-3.3SMAZ 90-264/47-440 130-370 3.3

More information

MAINTENANCE MANUAL. EDACS REDUNDANT POWER SUPPLY SYSTEM 350A1441P1 and P2 POWER MODULE CHASSIS 350A1441P3, P4, AND P5 POWER MODULES TABLE OF CONTENTS

MAINTENANCE MANUAL. EDACS REDUNDANT POWER SUPPLY SYSTEM 350A1441P1 and P2 POWER MODULE CHASSIS 350A1441P3, P4, AND P5 POWER MODULES TABLE OF CONTENTS MAINTENANCE MANUAL EDACS REDUNDANT POWER SUPPLY SYSTEM 350A1441P1 and P2 POWER MODULE CHASSIS 350A1441P3, P4, AND P5 POWER MODULES TABLE OF CONTENTS SPECIFICATIONS*... 2 INTRODUCTION... 3 DESCRIPTION...

More information

CitrusCom CS0806U. Features. Applications. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration

CitrusCom CS0806U. Features. Applications. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration Features Transient protection for high-speed data lines IEC 1000--2 (ESD) ±1kV (Air) ±8kV (Contact) IEC 1000-- (EFT) 0A (/0 ns) Cable Discharge Event (CDE) Small package (2.9mm 2.8mm 1.mm) Protects four

More information

TF501, TF521 Terminal Bases

TF501, TF521 Terminal Bases Ordering Data DATA SHEET TF501, TF521 Terminal Bases 1 Ordering Data Part No. Scope of delivery Product life cycle status 1SAP 117 000 R0271 1SAP 317 000 R0271 1SAP 117 200 R0271 1SAP 317 200 R0271 TF501-CMS,

More information

MINI-PS AC/10-15DC/8

MINI-PS AC/10-15DC/8 Primary-Switched Power Supply, Narrow Design Data Sheet 08/2004 MINI POWER provides: An extra narrow design, with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a

More information

PHOENIX CONTACT - 07/2006

PHOENIX CONTACT - 07/2006 Buffer module with maintenance-free capacitor-based power storage device INTERFACE Data sheet 102035_03_en PHOENIX CONTACT - 07/2006 Description Short-term mains interruptions are bridged by QUINT BUFFER,

More information

CPT-COM-U Card. TTL Serial USB Isolated Interface Board. Technical Brief

CPT-COM-U Card. TTL Serial USB Isolated Interface Board. Technical Brief CPT-COM-U Card TTL Serial USB Isolated Interface Board Technical Brief June 2014 Manual Release 1.0 Card Version 1.1 Copyright 2014 Creative Power Technologies P/L P.O. Box 714 MULGRAVE Victoria, 3170

More information

TM3TI4 module TM3-4 inputs temperature

TM3TI4 module TM3-4 inputs temperature Characteristics module TM3-4 inputs temperature Complementary Analogue input resolution Permissible continuous overload Input impedance LSB value Conversion time Sampling duration Main Range of product

More information

MPU-120S Series. Single Output, 180W Compact, U-Channel AC/DC Power Supplies. Key Features:

MPU-120S Series. Single Output, 180W Compact, U-Channel AC/DC Power Supplies.   Key Features: MPU-120S Series Single, 180W Compact, U-Channel AC/DC Power Supplies Key Features: 180W Power Universal 90-264 AC Power Factor Correction EN 60950 Approved Compact U-Channel Five Single Models Meets EN

More information

AOZ Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications

AOZ Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications Ultra-Low Capacitance TS Diode General Description The -03 is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2.0, USB 3.1, MDDI, SATA, and Gigabit thernet

More information

OTB1S0DM9LP I/O distributed module OTB - Modbus non isolated serial link m

OTB1S0DM9LP I/O distributed module OTB - Modbus non isolated serial link m Characteristics I/O distributed module OTB - Modbus non isolated serial link - 0..10 m Complementary Topology Bus length Main Number of devices per segment 0...32 Data format Parity Discrete input voltage

More information

Vital. Safety controller. Approvals: Control of: Features: Entire safety system based on the dynamic safety circuit.

Vital. Safety controller. Approvals: Control of: Features: Entire safety system based on the dynamic safety circuit. Safety controller Vital Approvals: TÜV Nord Vital 1 TÜV Rheinland Vital and 3 Control of: Entire safety system based on the dynamic safety circuit. Features: Vital is based on a single channel safety concept

More information

AOZ8312. Low Capacitance 2.5 V TVS Diode. Features. General Description. Applications

AOZ8312. Low Capacitance 2.5 V TVS Diode. Features. General Description. Applications Low Capacitance 2.5 V TVS Diode General Description The is a transient voltage suppressor array designed to protect high speed data lines from ESD and lightning. This incorporates twelve low capacitance

More information

Series AME25-JZ 25 Watt AC-DC / DC-DC Converter

Series AME25-JZ 25 Watt AC-DC / DC-DC Converter FEATURES: Click on Series name for product info on aimtec.com Series AME-JZ I/O Isolation 000VAC Low Ripple and Noise Operating Temp: -0 C to +70 C Over Voltage Protection Over current Protection Up to

More information

INPAQ Global RF/Component Solutions

INPAQ Global RF/Component Solutions TVN 0201 01 SP0 Specification Product Name Series Part No Transient Voltage Suppressor TVS Series TVN 0201 01 SP0 Size EIA 0201 TVN 0201 01 SP0 Engineering Specification 1. Scope TVN 0201 01 SP0 is a TVS

More information

TT-ST-M-2-PE-24DC. Extract from the online catalog. Order No.:

TT-ST-M-2-PE-24DC. Extract from the online catalog. Order No.: Extract from the online catalog TT-ST-M-2-PE-24DC Order No.: 2858904 TERMITRAB, spring-cage modular terminal block with integrated surge protection and disconnect knives, for assembly on NS 35/7.5, voltage

More information

VersaMax IP I/O Module

VersaMax IP I/O Module Module accepts four digital input signals and provides four digital outputs. It connects to a local bus that is interfaced to a Profibus-DP / PROFINET network by a Profibus Interface Unit (IC677PBI001)

More information

ABL8REM24050 regulated SMPS - 1 or 2-phase V AC - 24 V - 5 A

ABL8REM24050 regulated SMPS - 1 or 2-phase V AC - 24 V - 5 A Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 5 A Main Range of product Product or component type Power supply type Input voltage Output voltage Rated power in W Input protection

More information

CliQ II DC-UPS Module 24V 40A / DRU-24V40ABN

CliQ II DC-UPS Module 24V 40A / DRU-24V40ABN Highlights & Features Full corrosion resistant Aluminium chassis Suitable for 24V system up to 40A Built-in diagnostic monitoring for DC OK, Discharge and Battery Fail by relay contacts LED indicator for

More information

MDSP-Series 90kA, 150kA, 300kA Modular Distribution Surge Protector Type 2 Class II Surge Arrester

MDSP-Series 90kA, 150kA, 300kA Modular Distribution Surge Protector Type 2 Class II Surge Arrester These modular distribution panel protectors for three phase power systems are designed to prevent damage to electrical distribution systems from mainsborne transient voltages which can occur as the result

More information

ENGINEERING SPECIFICATION SHEET. Table of Contents 1 SCOPE ELECTRICAL SPECIFICATION...5

ENGINEERING SPECIFICATION SHEET. Table of Contents 1 SCOPE ELECTRICAL SPECIFICATION...5 Table of Contents 1 SCOPE...5 2 ELECTRICAL SPECIFICATION...5 2.1 INPUT REQUIREMENT... 5 2.1.1 Input voltage range... 5 2.1.2 Input frequency range... 5 2.1.3 AC inrush current... 5 2.1.4 Input current...

More information

OTB1C0DM9LP I/O distributed module OTB - CANopen bus m

OTB1C0DM9LP I/O distributed module OTB - CANopen bus m Characteristics I/O distributed module OTB - CANopen bus - 0..1000 m Complementary Topology Main Range of product Product or component type Integrated connection type Bus type Number of slave 0...63 Bus

More information

RClamp0551P. Ultra-Low Capacitance 1-Line, 5V ESD protection. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description

RClamp0551P. Ultra-Low Capacitance 1-Line, 5V ESD protection. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description - RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive

More information

PCD3.C90. Date Modification Asked by: Version E/A Bus Connector PCD2.K106 change to PCD3.K106 Müller.R 1.1

PCD3.C90. Date Modification Asked by: Version E/A Bus Connector PCD2.K106 change to PCD3.K106 Müller.R 1.1 Manual PCD3.C90 Revision History Date Modification Asked by: Version 14.09.09 E/A Bus Connector PCD2.K106 change to PCD3.K106 Müller.R 1.1 22.09.09 Added E/A Bus Connector PCD3.K116 Müller.R 1.2 06.01.10

More information

NI REM Remote I/O Overview DATASHEET. Analog Output Module for Remote I/O

NI REM Remote I/O Overview DATASHEET. Analog Output Module for Remote I/O DATASHEET NI REM-11115 Analog Output Module for Remote I/O Four voltage output ranges to choose from (0 V to 10V, ±10V, 0 V to 5 V, and ±5V) Two current output ranges to choose from (0 ma to 20mA, 4 ma

More information

ABL8REM24050 regulated SMPS - 1 or 2-phase V AC - 24 V - 5 A

ABL8REM24050 regulated SMPS - 1 or 2-phase V AC - 24 V - 5 A Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC - 24 V - 5 A Complementary Input voltage limits Network frequency Inrush current Main Range of product Product or component type Power supply

More information

OTB1C0DM9LP. Main , length of segment <= 185 m , length of segment <= 160 m. 3.4 kohm for I8...I kohm I0...I1 5.7 kohm I6...

OTB1C0DM9LP. Main , length of segment <= 185 m , length of segment <= 160 m. 3.4 kohm for I8...I kohm I0...I1 5.7 kohm I6... Product datasheet Characteristics OTB1C0DM9LP Complementary Topology Number of slave 63 Bus length Number of devices per segment Discrete input voltage Discrete input voltage type Discrete input type Input

More information

RClamp TM 0504M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features

RClamp TM 0504M RailClamp Low Capacitance TVS Diode Array PRELIMINARY Features Description RailClamps are surge rated diode arrays designed to protect high speed data interfaces. The RClamp series has been specifically designed to protect sensitive components which are connected

More information

STBEHC3020KC counter kit STB - 1 CH Hz - 2 I

STBEHC3020KC counter kit STB - 1 CH Hz - 2 I Characteristics counter kit STB - 1 CH - 0..40000 Hz - 2 I Main Range of product Product or component type Number of channels 1 Complementary Kit composition Counting input number 2 Counting frequency

More information

NI REM Remote I/O Overview DATASHEET. Digital Input Module for Remote I/O

NI REM Remote I/O Overview DATASHEET. Digital Input Module for Remote I/O DATASHEET NI REM-11154 Digital Input Module for Remote I/O Read digital input frequencies up to 5 khz Adjustable filter time to improve measurement quality Spring-terminal connectors allow fast wiring

More information

8B0C0320HW General information. 2 Order data. 3 Technical data 8B0C0320HW

8B0C0320HW General information. 2 Order data. 3 Technical data 8B0C0320HW 1 General information Connections for supplying external 24 V devices Extensive protective measures 2 Order data Model number Short description Figure Wall mounting ACOPOSmulti auxiliary supply module,

More information

AOZ8809ADI. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications

AOZ8809ADI. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications Ultra-Low Capacitance TVS Diode General Description The AOZ889ADI is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2., USB 3./3.1, MDDI, SATA, and Gigabit

More information

GS202 Encoder Switch

GS202 Encoder Switch GS202 Encoder Switch 20:2 encoder switch 20 encoder inputs (TTL / RS422 standard) Input signals A, /A, B, /B, Z, /Z on each encoder input 2 x 6 control inputs (HTL / PNP) 2 encoder outputs (TTL / RS422

More information

AOZ8808. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications

AOZ8808. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications Ultra-Low Capacitance TVS Diode General Description The is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2.0, USB 3.0, MDDI, SATA, and Gigabit thernet

More information

Expansion Module HZS 541-1S

Expansion Module HZS 541-1S Expansion Module HZS 541-1S 12.10.2015 Page 1 System Description The external HZS 541-1S expansion module provides users of biomass heating systems with additional 230 V AC relay outputs, analog inputs

More information

DPO A4. Description. Module with 4 digital outputs. Datasheet

DPO A4. Description. Module with 4 digital outputs. Datasheet DPO A4 Module with 4 digital outputs Datasheet Description Module with 4 digital outputs. Main characteristics: 4 digital outputs Maximum output current: 2 A for each output, 7 A total Overcurrent and

More information

XPSMCMDO Digital output pairs expansion modules with screw term

XPSMCMDO Digital output pairs expansion modules with screw term Characteristics 2 Digital output pairs expansion modules with screw term Main Range of product Product or component type Device short name Electrical connection [Us] rated supply voltage Number of inputs

More information

Time Counters mini "h", DC Version

Time Counters mini h, DC Version Type 633-DC Time Counters mini "h", DC Version Type 633.0 Type 633.7 Type 633.8 High shock resistance Miniature dimensions Electrical connections in standard grid Suitable for PCB mounting Machine-solderable

More information

Assembly and operating instructions DULCOMARIN II, N-Module (Power Supply Module without Relay) DXMaN

Assembly and operating instructions DULCOMARIN II, N-Module (Power Supply Module without Relay) DXMaN Assembly and operating instructions DULCOMARIN II, N-Module (Power Supply Module without Relay) DXMaN Please enter the identity code of your device here! DXMa _ Please carefully read these operating instructions

More information

Channel Switch CS. General Operating, Maintenance and Installation Manual

Channel Switch CS. General Operating, Maintenance and Installation Manual Channel Switch CS General Operating, Maintenance and Installation Manual D-91056 Erlangen Phone: +49 9131 7677 47 Fax: +49 9131 7677 74 Internet: http://www.ipcomm.de Email: info@ipcomm.de Edition September

More information

VL BPC MINI. A configurable industrial computer platform. Data sheet 2930_en_F. 1 Description. 2 Features

VL BPC MINI. A configurable industrial computer platform. Data sheet 2930_en_F. 1 Description. 2 Features A configurable industrial computer platform Data sheet 90_en_F Description PHOENIX CONTACT 0-08- Features The VL BPC MINI is an embedded box PC and is part of the Valueline family of industrial computers.

More information

Installation Instructions

Installation Instructions Installation Instructions (Catalog Number 1771-OD) This document provides information on: Because of the variety of uses for the products described in this publication, those responsible for the application

More information

EMOSAFE EN-100 Network Isolators for PCB assembly

EMOSAFE EN-100 Network Isolators for PCB assembly ENGLISH EMOSAFE EN-100 Network Isolators for PCB assembly Product Datasheet 1 FEATURES AND ADVANTAGES Suitable for PCB assembly: pluggable or solderable Ultra-compact Conforms to IEC 60601-1 10/100/1000

More information

MODEL: MD7ST. [3] LOOP DISCONNECT FUSE 0: Without 1: With (CENELEC/ATEX approval Not selectable)

MODEL: MD7ST. [3] LOOP DISCONNECT FUSE 0: Without 1: With (CENELEC/ATEX approval Not selectable) MODEL: MDST Lightning Surge Protectors for Electronics Equipment M-RESTER LIGHTNING SURGE PROTECTOR FOR STANDARD SIGNAL LINE (ultra-slim) Functions & Features High discharge current capacity 0 ka ( / 0μs),

More information

OTB1C0DM9LP I/O distributed module OTB - CANopen bus m

OTB1C0DM9LP I/O distributed module OTB - CANopen bus m Characteristics I/O distributed module OTB - CANopen bus - 0..1000 m Main Range of product Product or component type Integrated connection type Bus type Jan 28, 2018 Modicon OTB I/O distributed module

More information