MODULES FOR SAFETY AND MONITORING
|
|
- Ralf Cobb
- 6 years ago
- Views:
Transcription
1 MODULES FOR SAFETY AND MONITORING Woertz AG Hofackerstrasse 47, P.O. Box 948, CH-43 Muttenz, Switzerland Tel / , Fax / Woertz-USA 5 Discovery Drive, Unit Colmar PA 895 Tel. (5) , Fax (800) woertz@erols.com 3
2
3 Modules for safety and monitoring Index Page Introduction 3.4 Diode terminals: SnapLine with diodes A / 3.5 Diode modules with diodes to be connected individually 3.6 Diode modules with common anode 3.7 Diode modules with common cathode 3.8 Diode modules for general alarm and lamp test 3.9 Modules with indicators: LED indicators with lamp test and general alarm 3.0 Modules with indicators: Signal recorder module 3. Modules with fuseboards for fuses type 5 x 0 mm 3. Modules with fuseboards with supervision 3.3 Transient Suppressor: SnapLine overvoltage protection 3.4 Modules for overvoltage protection with varistors
4 Modules for safety and monitoring Introduction Thanks to the modules described in this brochure, safety or monitoring functions may easily be incorporated into circuits. Diode modules have a wide field of applications such as polarity protection, logical functions, general alarm, lamp test, recovery diode or rectifier functions. Modules with indicators allow a direct and easy monitoring of the voltage applied on various conductors. Modules with fuseboards offer the possibility to protect power supplies or outputs against the failure of the individual devices and also to limit the supplied current. Overvoltage protection modules protect efficiently sensitive devices against short-time overvoltages. If you need modules with other functions, there are circuit boards available, which can be fitted with the desired components (see brochure Modules for special applications ). For special applications or if you need for instance another type of diodes, other specification or circuit diagram please contact us! Our flexible team will be pleased to help you fulfil your ideas and to develop new modules for you. 3.4
5 Diode terminals SnapLine with diodes A / - SnapLine terminals with integrated diodes - Through-going, lamp control and common alarm functions - Applications: rectifier, surge suppression, logical functions, polarity protection etc. - Two Snap-Lines can easily be connected as a.6 A full wave rectifier bridge - Modular stacking of common alarm or lamp control functions 45378T/D Accessories 30407T End barrier Compatible 3-level terminal 3043RO Cross connection 0-pole red 3043BL Cross connection 0-pole blue Cross connection 0-pole grey 8535/x Insulated cross-connections w. screws x =, 3, 4, 5, 0 poles 304, Isolation strip red, blue 8047, 48 Test plug red, black 35455/55xx Labels for custom use RB/5x5 Diodes Max. reverse voltage Max. continuous current (single terminals) Max. continuous current (stacked, continuously operating terminals) Max. surge current Voltage drop over diode Leakage current Terminal Max. operating voltage Max. terminal current Operating temperature range Nominal cross section of connecting terminals Maximum torque Size W x H x D (from rail) A 0.8 A 30 A about 0.8 V (max.. V) < 400 V (SEV), 300 V (UL) 0 A -55 C up to +80 C (AWG4-4) 0.4 Nm 5.08 x 86.5 x 44 mm diode, anode in the middle, an additional terminal on top diode, cathode in the middle, an additional terminal on top diodes with common anode (lamp control function) diodes with common cathode (common alarm function) diodes with serial connection and common middle terminal independent diodes 45378T/A 45378T/K 45378T/A 45378T/K 45378T/D 45378T/D 3.5
6 Diode modules with diodes to be connected individually Range 4547B/04E - Modules with diodes for general purpose - With white cover protecting against inadvertent contact - Wiring diagram printed on cover - For clipping on to DIN rails according to EN 6075 TH and EN 6075 TH 35-5 Accessories 3043RO Junction rack 0 pole red 3043BL Junction rack 0 pole blue 4547B/08E 4547B/6E 4547B/6E On request Other types of diodes 4 channels 8 channels 6 channels Versions Max. rated voltage Max. diode blocking voltage Max. diode blocking current Diode on-state voltage Max. diode on-state current at single load at simultaneous load Nominal cross section of connecting terminals Operating temperature range Weight Size W x H x D 50 g 30 x 83 x 45 mm 78 g 50 x 83 x 45 mm 0 g 60 x 83 x 54 mm 4547B/04E 4547B/08E 4547B/6E 3.6
7 Diode modules with common anode Range 4547B/08A - Modules with diode circuit with common anode - Modules with a great area of applications for instance for lamp tests - Removing the wire bridge J (under the cover) enables the module to be split into two separate units - With white cover protecting against inadvertent contact - For clipping on to DIN rails according to EN 6075 TH and EN 6075 TH B/6A 4547B/3A 4547B/3A Accessories 3043RO Junction rack, 0 poles, red 3043BL Junction rack, 0 poles, blue On request Other types of diodes 8 channels 6 channels 3 channels Versions Max. rated voltage Max. diode blocking voltage Max. diode blocking current Diode on-state voltage Max. diode on-state current at single load at simultaneous load Nominal cross section of connecting terminals Operating temperature range Weight Size W x H x D 5 g 30 x 83 x 45 mm 79 g 50 x 83 x 45 mm g 60 x 83 x 54 mm 4547B/08A 4547B/6A 4547B/3A 3.7
8 Diode modules with common cathode Range 4547B/08K - Modules with diode circuit with common cathode - Modules with a great area of applications for instance for general alarms - Removing the wire bridge J (under the cover) enables the module to be split into two separate units - With white cover protecting against inadvertent contact - Wiring diagram printed on cover - For clipping on to DIN rails according to EN 6075 TH and EN 6075 TH B/6K 4547B/3K 4547B/3K Accessories 3043RO Junction rack, 0 poles, red 3043BL Junction rack, 0 poles, blue On request Other types of diodes 8 channels 6 channels 3 channels Versions Max. rated voltage Max. diode blocking voltage Max. diode blocking current Diode on-state voltage Max. diode on-state current at single load at simultaneous load Nominal cross section of connecting terminals Operating temperature range Weight Size W x H x D 5 g 30 x 83 x 45 mm 79 g 50 x 83 x 45 mm g 60 x 83 x 54 mm 4547B/08K 4547B/6K 4547B/3K 3.8
9 Diode modules For general alarm and lamp test - Modules for general alarm and lamp test - Different types: 6U: 6 channels with general alarm, lamp test and longitudinal diodes 3Z: 3 channels with general alarm and lamp test - With white cover protecting against inadvertent contact - Wiring diagram printed on cover - For clipping on to DIN rails according to EN 6075 TH and EN 6075 TH B/6U 4547B/3Z Accessories 3043RO Junction rack, 0 poles, red 3043BL Junction rack, 0 poles, blue On request Other types of diodes Versions Max. rated voltage Max. diode blocking voltage Max. diode blocking current Diode on-state voltage Max. diode on-state current at single load at simultaneous load Nominal cross section of connecting terminals Operating temperature range Size W x H x D 6 channels 60 x 83 x 45 mm 3 channels 60 x 83 x 45 mm 4547B/6U 4547B/3Z 3.9
10 Modules with indicators LED indicators with lamp test and general alarm - Marking facilities with self-adhesive labels - Compact - With lamp test for checking the LED On request LED of different color 4595B/ Version General alarm output Diode blocking voltage Diode blocking current Diode on-state voltage LED Operating temperature Size W x H x D 6 channels max. red 50 x 83 x 45 mm Rated voltage V 4 V 48 V 4595B/ 4595B/ 4595B/3 3.0
11 Modules with indicators Signal recorder module - LED signalize and memorize one or several active inputs - Relay switches potential-free contact, as soon as one input is active - Reset-function by push button or over terminals - Easy marking by means of marker pen or labels 455B/4 455B/5 R+ R- 4 V DC 3 Reset V (N) + 4 (Ph) 4 V DC, 8 channels 5 V AC, 8 channels 30 V AC, 8 channels Versions Supply and signal voltage External reset voltage Max. external reset current Max. supply current (8 active inputs) Max. signal current / input Min. signal pulse length Relay contacts 0-30 V DC 0-30 V DC 0 ma (4 V DC) 60 ma 0.4 ma 5 ms AC / 6A ( A max. 0 s) 98-3 V AC (50-60 Hz) 0-30 V DC 0 ma (4 V DC) 40 ma 0.8 ma 0 ms AC / 6A ( A max. 0 s) 30 V AC ±0% (50-60 Hz) 0-30 V DC 0 ma (4 V DC) 35 ma 0.7 ma 0 ms AC / 6A ( A max. 0 s) Operating temperature range Dimensions W x H x D -0 C up to +65 C 80 x 83 x 50 mm -0 C up to +60 C 80 x 83 x 50 mm 80 x 83 x 50 mm 455B/4 455B/5 455B/30 3.
12 Modules with fuseboards for fuses type 5 x 0 mm Range 4530C - Compact - Protected fuses 4539A/4 4539A/8 4539A/ channels horizontal 4 channels vertical 8 channels vertical Versions Number of poles For fuses 5 x 0 mm up to max. 6.3 A 4 5 x 0 mm up to max. 0 A 8 5 x 0 mm up to max. 0 A Operating temperature Size W x H x D -0 C up to +40 C 30 x 83 x 43 mm -0 C up to +60 C 30 x 83 x 58 mm -0 C up to +60 C 60 x 83 x 58 mm 4530C 4539A/4 4539A/8 3.
13 Modules with fuseboards with supervision - Consist of 4 fuses, the state of which indicated through red LED - Failure of one of the fuses activates the general alarm relay (changeover contact may be used with an external visual or audible alarm) - For fuses type 5 x 0 mm up to 6.3 A 455B/ 455B/ 3 4 M N Versions Number of fuses Operating voltage (at the fuses) Minimum load current Maximum load current (fuse) Leakage resistance when fuse has blown Relay operating voltage (M+N) Type of relay switch Contact rating (general alarm relay) Operating temperature Size W x H x D V AC/DC V AC/DC 0.7 ma 6.3 A min. 330 kω 8-35 V AC/DC changeover contact, potential free 8 A / AC -0 C up to +50 C 60 x 83 x 57 mm V AC/DC V AC/DC 0.7 ma 6.3 A min. 330 kω V AC/DC changeover contact, potential free 8 A / AC -0 C up to +50 C 60 x 83 x 57 mm 455B/ 455B/ 3.3
14 Transient Suppressor SnapLine overvoltage protection - Very fast overvoltage protection for sensitive devices - Absorbs power pulses up to 600W during ms (0/000ms wave-shape) - If overloaded, it makes a short circuit (Serial fuse gives an excellent protection) - Through-going conductors for high security - Bidirectional protection - Integrated, insulated extra terminal 45385T/5 Accessories 30407T End barrier Compatible 3-level terminal 3043RO Cross connection 0-pole red 3043BL Cross connection 0-pole blue Cross connection 0-pole grey 8535/x Insulated cross-connections w. screws x=, 3, 4, 5, 0 poles 304, Isolation strip red, blue 8047, 48 Test plug red, black 35455/55xx Labels for custom use RB/5x5 Supply Fuse Typical use Protected device Protection diodes Maximum pulse energie Maximum surge current (one half wave 60Hz) Maximum repetitive surge current 5/ / 4/ 48/ 0 V DC Maximum repetitive surge current 5/ 30 V AC Breakdown voltage at 0 ma: 5 VDC Breakdown voltage at ma: / 4/ 48/ 0 V DC Breakdown voltage at ma: 5/ 30 V AC Maximum continuous overload 600W / ms; kw / 00 µs 00 A 57 / 33 / 6 / 8.6 / 3.6 A. / A 6.8 V DC ±5% 3 / 7 / 5 / 0 V DC ±5% 4 / 83 V AC ±5% W (5W / 60 s) Operating temperature range Maximum rated current through terminal Nominal cross section of connecting terminals Maximum torque Size W x H x D (from rail) -55 C up to +80 C 0 A (AWG4-4) 0.4 Nm 5.08 x 86.5 x 44 mm 5 V DC V DC 4 V DC 48 V DC 0 V DC 5 V AC 30 V AC 45385T/ T/ 45385T/ 45385T/ T/ T/ T/4 3.4
15 Modules for overvoltage protection with varistors On request Connection of pluggable PCB terminals. 458A/ G 3 Version Varistors Surge current max. 8 / 0 Max. continuous load capacity Operating temperature Size W x H x D 6 channels, common connection SIOV - S0K xx 6.5 ka W -0 C up to +40 C 30 x 83 x 45 mm Rated voltage varistor 4 V DC 4 V AC 0 V AC 0 V AC AC 458A/ 458A/ 458A/3 458A/4 458A/5 3.5
16 09.00 / 500 E
CONTA-ELECTRONICS. CONTA-PROTECT overvoltage protection
CONTA-ELECTRONICS CONTA-PROTECT overvoltage protection When choosing the correct device for overvoltage protection, it is important to consider the regulations VDE 110-1, IEC 61643-1, EN 61643-11 and VDE
More information34 SERIES. Slim electromechanical PCB relays 6 A Ultra-slim 1 Pole - 6 A relay
34 Slim electromechanical PCB relays 6 34 Ultra-slim 1 Pole - 6 relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in terminal sockets 34.51 34.51-5010
More informationCONTA-ELECTRONICS. Fuse, component, diode and indicator modules
Fuse, component, diode and indicator modules In the passive electronics sector, CONTA-CLIP offers a large variety of module types which support fast, secure, and compact functionality. These modules can
More informationSurge Protection Devices Ex9UE2
Surge Protection Devices Ex9UE2 Surge Protection Devices Type 2 (Class II, T2, C) Tested according to EN 61643-11 Maximum continuous operational voltage U c from 275 V up to 440 V AC Versions with 1+0,
More informationModule no: LabelId: Operator:Phoenix 14:20:45, Mittwoch, 1. März 2000
PLC-O M 8 "...6" Equipped with pluggable miniature optical coupler Terminal width 6.2 VDE, UL, CSA applied for (IEC) [mm 2 ] Connection data rigid solid 0.14-2.5 flexible stranded 0.14-2.5 AWG 26-14 I
More informationEasy Analog RNB130. Technical Information. Primary switched-mode power supply
Technical Information Easy Analog RNB130 Primary switched-mode power supply Your benefits Small housing, 35 mm (1.38") width High availability Wide range input - can be used world-wide Power reserve (Power
More informationem4 Accessories Digital expansions
em4 Accessories Digital expansions Up to two digital / analog expansions can be added to the em4 nanoplc to expand up to 46 I/Os 6 digital / analog configurable inputs (0-10 VDC, 0-28.8 VDC, Potentiometer)
More informationMonitoring technique. VARIMETER Voltage relay MK 9064N, MH 9064
Monitoring technique VARIMETER Voltage relay MK 9064N, MH 9064 0269462 Your Advantages Preventive maintenance For better productivity Quicker fault locating Precise and reliable Min-, Max. value or window
More information02/11/2015
24 x 48 Hour CTR24 non-backlit model Part number 87622162 Display : 8-digit LCD, height 8 mm Built-in module for voltage inputs 10 260 VAC/DC () 4 timing ranges : 99,999.99 hrs - 99,999.59 hrs - 999,999.9
More informationExtract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
More informationInterface Relay CRINT-1x
Interface Relay CRINT-1x 1 Features Space saving interface relay to combine with PLCs Coil voltage UC12, 24, 48, 60, 110-125, 220-240V Integrated protection circuit Relay is replaceable separately Available
More information40 Series - Miniature PCB/Plug-in relays A. 3.5 mm contact pin pitch 1 Pole 10 A PCB or 95 series sockets.
40 Series - Miniature PCB/Plug-in relays 8-10 - 12-16 40 1 & 2 Pole relay range 40.31-1 Pole 10 (3.5 mm pin pitch) 40.51-1 Pole 10 (5 mm pin pitch) 40.52-2 Pole 8 (5 mm pin pitch) PCB mount - direct or
More information93 SERIES. Timed socket for 34 series 93.68/93.69
93 93 Slim timed sockets for 34 series, 6.2 mm wide Timer adjustment via top mounted rotary knob accessible after assembly Control signal terminal DIP-switch for selection of 4 time scales and 8 functions
More informationElectronic timer CT-ERS.21
2CDC 251 057 F0t07 Features Rated control supply voltage 24 240 V AC/DC Single function ON delay timer One device includes 10 time ranges (0.05 s 300 h) 2 c/o contacts 2 LEDs for status indication Width
More informationLeutron. Lightningand. Surge Protection for Power Net Systems (SPD) with EnerPro Combi-Devices. Seite 0 von14
Leutron Lightningand Surge Protection for Power Net Systems (SPD) with EnerPro Combi-Devices Seite 0 von14 Novelties 2003 Combi Surge Protectors Leutron GmbH, 70771 Leinfelden-Echterdingen, Deutschland
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules 39 SERIES Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention
More informationVEO. V2PF480Y/277VSY01 Art.Nr.: V2PF480Y/277VSY01P Art.Nr.: TECHNICAL DATA
Monitoring of phase sequence and phase loss Monitoring of asymmetry Supply voltage 208-480 V AC Supply circuit = measuring circuit 1 change-over contact Width 22,5 mm Control elements Asymmetry Status
More information02/11/2015
DIN Rail Mount 35 mm HSV Part number 84874320 Control of overspeed, underspeed, operating rate, stopping Measurement via discrete sensors - 3-wire PNP or NPN, Namur, voltage 0-30V or volt-free contact
More informationPHOENIX CONTACT - 01/2007
Uninterruptible power supply INTERFACE Data Sheet 103123_00_en PHOENIX CONTACT - 01/2007 Description Especially compact and easy-to-use, the new MINI-DC-UPS/ 24 DC/2 is a combination of the power supply
More informationEngineering Guideline. pac-carriers Type for Honeywell system Experion Series C I/O
Engineering Guideline pac-carriers Type 995 for Honeywell system Experion Series C I/O pac-carrier Type 995 Engineering Guideline/Honeywell 04..009 pac-carrier Type 995 Integration of conventional process
More informationProduct Information Motor and machine protection
- Basic information The type 45 brake rectifier is used to supply DC operated disc brakes on motors where standard release reaction times of the brake are required. - Application The brake rectifier is
More informationMULTI-POLE PHOTOVOLTAIC SYSTEMS. COMPACT and MODULAR Housing
MULTI-POLE Lightning Current and Surge Arresters for PHOTOVOLTAIC SYSTEMS Class I / (B+C) and Class II / (C) COMPACT and MODULAR Housing 44 PV ISPRO BS(R) 12,5 The PV ISPRO BS(R) 12,5 series of over voltage
More informationElectronic timer CT-ERS.12 ON-delayed with 1 c/o contact Data sheet
2CDC 251 056 F0t07 Features Rated control supply voltage 24-48 V DC, 24-240 V AC Single-function ON-delay timer One device includes 10 time ranges (0.05 s - 300 h) 1 c/o contact 2 LEDs for status indication
More informationPLC-RSC- 24UC/21. Extract from the online catalog. Order No.:
Extract from the online catalog PLC-RSC- 24UC/21 Order No.: 2966184 The illustration shows the version PLC-RSC-24DC/21 PLC relay, consisting of base terminal block PLC-BSC.../21 with screw connection and
More informationMicro Contactor MA Series
Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC
More informationElectronic timer CT-AHD.22
2CDC 251 093 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationSPM Series Plug-in Surge Protector Type 2/3 (Test Class II/III) Single & Three Phase Surge Arresters
The SPM series of modular surge protection devices provides protection of equipment connected to incoming low voltage AC power supplies against the damaging effects of transient over voltages caused by
More informationElectronic timer CT-ARS.11
2CDC 251 088 F0t07 Features Rated control supply voltage 24 240 V AC/DC Single function OFF delay timer without auxiliary voltage One device includes 7 time ranges (0.05 s 10 min) 1 c/o (SPDT) contact
More informationMIC-2 MKII, Multi-instrument DATA SHEET
MIC-2 MKII, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)
More informationRSTI-EP Slice I/O. Digital Output Module
GFK-2959B December 2015 RSTI-EP Slice I/O Digital Output Modules EP-2214, EP-2614, EP-2634, EP-2218, EP-225F Relay Output Module Solid-state Relay Output Module EP-2814 Module Status LED Channel Status
More informationISOMETER isopv with coupling device AGH-PV
Insulation monitoring device for unearthed AC, AC/DC and DC systems (IT systems) for photovoltaic plants up to AC 793 V/DC 1100 V Vorläufiges Datenblatt IsoPV_D00024_02_D_XXEN/07.2018 ISOMETER with coupling
More informationQUINT-PS/ 1AC/24DC/ 5
Extract from the online catalog QUINT-PS/ 1AC/24DC/ 5 Order No.: 2866750 DIN rail power supply unit 24 V DC/5 A, primary switched-mode, 1- phase. The SFB technology (Selective Fuse Breaking Technology)
More informationMIC-2 Multi-instrument DATA SHEET
Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional) Profibus DP (optional) I/O modules
More informationPLC-OPT-230UC/ 24DC/2
Extract from the online catalog PLC-OPT-230UC/ 24DC/2 Order No.: 2900368 PLC-INTERFACE, consisting of PLC-BPT basic terminal block with Push-in connection and plug-in miniature solid-state relay, for mounting
More informationVEO. V2ZR V AC/DC Art.Nr.: V2ZR10P V AC/DC Art.Nr.: TECHNICAL DATA
Off-Delay 10 time ranges Supply voltage 24-240V AC/DC 1 change-over contact Width 22,5 mm Control elements Fine adjustment Setting of time range Status indication LED U/t: Supply voltage LED R: Relay status
More informationMiniature PCB Relays A
SЕRIES Miniature PCB Relays 8-10 - 12-16 Medical and dentistry Control panels Panels for electrical distribution Toys utomation for blinds, grilles and shutters Door and gate openers Electronic circuit
More information02/11/2015
35 mm - 1 Relay 8A OUR1 Part number 88867105 Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external
More information3RG7 Opto-BERO Photoelectric Proximity Switches
K 80 Sensing range 2 m (energetic sensor) Diffuse sensors Modulated infrared light DC or AC/DC M 12 plug or moulded plastic joint IP 67 ON-delay, OFF-delay, pulse shaping Timer 0.01 s to 10 s Enabling
More informationVAL-CP-1S-175. Extract from the online catalog. Order No.:
Extract from the online catalog VAL-CP-1S-175 Order No.: 2859479 Pluggable type 2 arrester (surge arrester) for 1-phase current supply networks with separate N and PE (3-conductor system: L1, N, PE), with
More informationMIC-2 MKII & MIC-2 MKII DIN, Multi-instrument DATA SHEET
& DIN, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)
More informationPI84 with socket GZM80 interface relays
RM84 + GZM80 Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load (capacity) Min. switching current Max. inrush current Rated current
More informationflare MOVE Relay modules Modular design H 10/02
flare MOVE Relay modules Modular design 0112.0 H 10/02 Relay modules flare MOVE Plug-in relays Overall width: 15.8 mm plug-in relay single changeover contact / 2 changeover contact Dimensions (mm): B x
More informationRM84 miniature relays
RM84 miniature relays RM84 Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load (capacity) AC AC1 AC15 DC1 DC13 Motor load acc. to
More informationSNO 4003 K plus. Areas of application for the unit. Connection circuit diagrams. Intended use. Competent persons. Equipment and functional description
SNO 4003 K plus Safety relay for emergency stop and guard door applications SILCL2 in accordance with EN 62061 PL d, Category 3 in accordance with EN ISO 13849-1 Stop category 0 in accordance with DIN
More informationPHOENIX CONTACT Features
Electronic monitoring relay for temperature monitoring Data sheet 107385_en_00 1 Description PHOENIX CONTACT - 2016-05-10 Features Safety and system availability requirements are constantly on the increase
More information4 C/O. Contact material AgNi AgNi gold-plated Nominal contact current Inrush current
Quattro-Relais Quattro Relay 4 Quattro Relay 4A4 Standard type / With LED and protection diode on request Quattro-Relais Order Code Order Code Quattro Relay 4 A 4 4 V DC N Type of relay Quattro Relay 4
More informationModule no: LabelId: Operator:Phoenix 18:32:42, Donnerstag, 28. Juni 2001
PLC-R SEN...6 M 3 8 Equipped with pluggable miniature relay, 1 N/O contact (1) Terminal width 6.2 VDE, UL, CSA applied for (IEC) [mm 2 ] Connection data rigid solid 0.14-2.5 flexible stranded 0.14-2.5
More informationIB ST 24 AO 4/EF. INTERBUS-ST analog output module, 4 outputs, 0-10 V, ±10 V, 0-20 ma, 4-20 ma. Data sheet. 1 Description
INTERBUS-ST analog output module, 4 outputs, 0-10 V, ±10 V, 0-20 ma, 4-20 ma Data sheet 105597_en_01 PHOENIX CONTACT 2014-10-24 1 Description The module is designed for use within an ST station. It is
More informationVZBs. Power PCB Relay RT2 2 pole 8 A, DC and AC-coil. Features. Contact data
Features 2 C/O or 2 N/O contacts Sensitive coil 400 mw DC- or AC-coil 5 kv / 10 mm coil-contact Protection class II (VDE 0700) Height 15.7 mm Sockets with PCB-type or screw-type terminals Applications
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
More informationOvervoltage Protection Devices
Siemens AG 2010 Overvoltage Protection Devices /2 Introduction /3 Lightning Arresters, Type 1 /5 Combination Surge Arresters, Type 1 and Type 2 /7 Surge Arresters, Type 2 /11 Surge Arresters, Type 3 /12
More informationRCMB20/RCMB Series
4 T M /-500 Series Integratable Ground Fault Monitoring Modules For Integration Into Frequency Converters and Combiner Boxes Technical Bulletin NAE1042510 / 10.2012 BENDER Inc. 700 Fox Chase, Coatesville
More informationVEO. V2UF230V10 Art.Nr.: TECHNICAL DATA
Continous voltage monitoring Mains fluctuation detection Detects voltage drop / short interruptions of at least 10ms Prevents undefined states in switching and control systems Generates reset pulse after
More informationG3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
More informationLED Driver Compact fixed output
Driver LC 100W 1100 2100mA flexc C EXC EXCITE series Product description Constant current LED Driver Dimmable via ready2mains Gateway Dimming range 15 100 % (Depending on load. For details refer to chapter
More informationAccessories for pluggable interface relays CR-P Sockets
Data sheet Accessories for pluggable interface relays CR-P Sockets Characteristics Logical and standard socket for pluggable interface relays CR-P Snap-on mounting on DIN rail Connector for pluggable function
More informationElectronic timer CT-APS.21 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-APS.21 OFF-delayed with 2 c/o (SPDT) contacts The CT-APS.21 is an electronic timer from the CT-S range with OFF-delay. It provides 10 time ranges and a continuous rated control
More informationVAL-CP-3S-350. Extract from the online catalog. Order No.:
Extract from the online catalog VAL-CP-3S-350 Order No.: 2859521 Commercial data EAN 4017918977610 Pack 1 Pcs. Customs tariff 85363030 Weight/Piece 388.83 g Product key J020 Catalog page information Page
More information02/11/2015
DIN Rail Mount 22.5 mm TU2R1 Part number 88865305 Product with 1 relays (88 865 100/103/105/115/125/135/145/155/185/503) : Replaced by the 17,5 mm range For instance : previous part number 88 865 XXX /
More informationSingle-phase ( V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable
70 Series - Line monitoring relay 70 Features 70.11 70.31 70.41 Electronic voltage monitoring relays for single and three-phase applications Multifunctional types, providing the flexibility of monitoring
More information16-Channel Digital Input Termination Card 24Vdc
TDI16AIA 16-Channel Digital Input Termination Card 24Vdc (TDI16AIA) Issue 3 October 2005 INTRODUCTION PURPOSE The TDI16AIA 16-channel digital input termination card acts as an interface between the digital
More information2U Congestion Alert Rack Insert for UK
2U Congestion Alert Rack Insert for UK 2U Congestion Alert Rack Insert for UK The 2U congestion alert rack insert comes fully assembled, wired and ready to be installed in a rack. The rack provides communications,
More informationSolid State Remote Power Controller E /627
Solid State Remote Power Controller E--623/62 Description The E-T-A Solid State Remote Power Controllers E--623/62 are electronic control modules suitable for inductive loads such as electromagnetic valves
More informationElectronic timer CT-ERD.12
2CDC 251 092 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationRedundancy unit CP-A RU
2CDC 271 010 F0t06 Features Decoupling of CP power supply units with 2 inputs, each up to 20 A per input / channel Output up to 40 A True redundancy by 100 % decoupling of two parallel connected power
More informationQUINT-PS/1AC/24DC/10. Extract from the online catalog. Order No.:
Extract from the online catalog QUINT-PS/1AC/24DC/10 Order No.: 2866763 DIN rail power supply unit 24 V DC/10 A, primary-switched mode, 1- phase. The SFB technology (Selective Fusebreaking Technology)
More informationTT-2-PE-M-24DC. Extract from the online catalog. Order No.:
Extract from the online catalog TT-2-PE-M-24DC Order No.: 2920641 Modular terminal block with two-stage surge protection for one operated floating double conductor, disconnect knife on both signal paths,
More informationPHOENIX CONTACT - 01/2010. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Uninterruptible power supply with integrated power supply unit INTERFACE Data sheet 104211_en_00 1 Description PHOENIX CONTACT - 01/2010 Features The MINI-DC-UPS provide an uninterruptible DC voltage both
More informationSPM Series Plug-in Surge Protection
SPM Series Plug-in Surge Protection The SPM series of modular surge protection devices provides protection of equipment connected to incoming low voltage AC power supplies against the damaging effects
More informationMINI MCR-SL-UI-REL(-SP)
Configurable Threshold Value Switch Data Sheet 11/2004 Method of Operation The configurable 3-way threshold value switch MINI MCR-SL-UI-REL(-SP) is used to control and monitor analog standard signals.
More informationPLC-OSC-120UC/ 24DC/ 2
Extract from the online catalog PLC-OSC-120UC/ 24DC/ 2 Order No.: 2966650 The illustration shows the version PLC-BSC- 24DC/21 PLC interface, consisting of base terminal block PLC-BSC with screw connection
More informationControl elements. Fine adjustment. Status indication. 24 V DC typ. 0,25 W / 0,25 VA. 24 V DC typ. 0,03 W / 0,09 VA. 0,15 3 s. 0,5 10 h.
On-Delay 10 time ranges Supply voltage 24-240V AC/DC 1 change-over contact Width 22,5mm Control elements Fine adjustment Setting of time range Status indication LED U/t: Supply voltage LED R: Relay status
More informationPHOENIX CONTACT - 07/2006
Buffer module with maintenance-free capacitor-based power storage device INTERFACE Data sheet 102035_03_en PHOENIX CONTACT - 07/2006 Description Short-term mains interruptions are bridged by QUINT BUFFER,
More informationKuhnke Technical Data. Contact Details
Kuhnke Technical Data The following page(s) are extracted from multi-page Kuhnke product catalogues or CDROMs and any page number shown is relevant to the original document. The PDF sheets here may have
More informationSNO 4062K SNO 4062KM SNO 4062 K / KM. Circuit diagram. Applications. Function. Function (Continued)
SNO 4062K SNO 4062 K / KM Basic unit for emergency stop and guard door applications Basic unit as per DIN EN 60204-1 and EN ISO 13849-1 for single or twin channel emergency stop monitoring. PL e and category
More informationMOTUS ContactronControl. Less is more.
MOTUS ContactronControl. Less is more. Content. MOTUS Less is more. Less wear, longer lifespan. Learn more about MOTUS at our website. 3 Our Company. Page 4. For more than 80 years, Wöhner has stood for
More informationResidual Current Devices drcm Digital
Digital Line voltage independent RCCB for fault or additional protection with additional digital features. System Monitoring: Preventive information / warning before the RCD trips in case of leakage currents.
More informationVEO. V2ZS V AC/DC Art.Nr.: V2ZS20P V AC/DC Art.Nr.: TECHNICAL DATA
4 time ranges 4 transition times Supply voltage 12-240V AC/DC 2 normally open contacts Width 22,5 mm Control elements Fine adjustment star contactor Setting of time range star contactor Transit time Status
More informationVoltage monitoring relays CM-ESS.1 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 For single-phase AC/DC voltages The CM-ESS.1 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationIndustrial Power Supplies
50-600 Watt Features Switch mode power supplies for DIN-rail mounting 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) Selectable 115/ 230 VAC input Very low ripple and noise
More information08/07/2015
DIN Rail Mount 22.5 mm TUR1 Part number 88865105 Product with 1 relays (88 865 100/103/105/115/125/135/145/155/185/503) : Replaced by the 17,5 mm range For instance : previous part number 88 865 XXX /
More informationPower Electronics. Semiconductor relay / - contactor
Power Electronics Semiconductor relay / - contactor PH 9260 POWERSWITCH 0247349 Semiconductor relay PH 9260.91 Semiconductor contactor PH 9260.91/000/01 AC semiconductor relay / -contactor According to
More informationBulletin 700-SH Solid-State Relays. Overview/Product Selection. Bulletin 700-SH. Product Selection
Overview/Product Selection Bulletin 700-SH 40 A (resistive) Max. Continuous (Output) Current with Heat Sink 264V AC or 528V AC Max. Voltage Range Options 5 24V DC, 100 120V AC, 200 240V AC Control Input
More informationResidual Current Devices FRCdM Type B, B+ and Bfq Digital
Residual Current Devices FRCdM Type B, B+ and Bfq Digital All-current sensitive RCCB for fault or additional protection Digital Features System Monitoring: Preventive information / warning before the RCD
More informationDEIF A/S. MIC Multi-instrument G. Data sheet. Features. Accuracy. Measurements. Installation. Intelligent. Display. Communication DEIF A/S
Multi-instrument 4921210107G Features Measurements All 3-phase AC measurements True RMS Replaces analogue meters Intelligent Suitable for all 3-phase network topologies Replaces transducers Accuracy U,
More informationBLITZDUCTOR XTU Universal lightning current / surge arrester
Pluggable DIN Rail Mounted SPDs Combined lightning current and surge arrester Max. discharge capacity for balanced data interfaces Capable of carrying lightning currents up to 10 ka (10/50 μs) For installation
More informationQUINT-PS AC/24DC/10
Extract from the online catalog QUINT-PS-100-240AC/24DC/10 Order No.: 2938604 DIN rail power supply unit 24 V DC/10 A, primary switched-mode, 1- phase Commercial data EAN 4017918890537 Pack 1 Pcs. Customs
More informationVital. Safety controller. Approvals: Control of: Features: Entire safety system based on the dynamic safety circuit.
Safety controller Vital Approvals: TÜV Nord Vital 1 TÜV Rheinland Vital and 3 Control of: Entire safety system based on the dynamic safety circuit. Features: Vital is based on a single channel safety concept
More informationPLC-RSC- 24DC/ Extract from the online catalog. Order No.:
Extract from the online catalog PLC-RSC- 24DC/21-21 Order No.: 2967060 PLC relay, consisting of base terminal block PLC-BSC.../21 with screw connection and pluggable miniature relay with power contact,
More informationRE17LAMW on-delay timing relay - 1 s..100 h V AC/ DC - solid state output
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC/ DC - solid state output Main Range of product Product or component type Discrete output type Width Component name Time delay type Time
More informationPSR-SCP- 24DC/URM4/4X1/2X2/B PSR-SPP- 24DC/URM4/4X1/2X2/B
Safety Relay as a Contact Extension Block INTERFACE Data Sheet PHOENIX CONTACT - 05/2006 Description The PSR-...- 24DC/URM4/4X1/2X2/B safety relay can be used as a contact extension block in safety circuits
More informationPower Supply HARTING pcon
HARTING pcon 2120 Advantages Compact design and high power density Easy installation and tool-less connection Wide input range for world-wide use Wide operating temperature range (up to 70 C without derating)
More informationSignal Doublers. VariTrans A 20300
ProLine Interface Technology Signal Doublers Signal doublers with two switchable calibrated outputs in a 6 mm housing, also for applications with high output loads. The Task Isolation and transmission
More informationPSM-ME-RS232/TTY-P Interface converter for RS-232 to TTY transmission systems
Interface converter for RS- to transmission systems. Short Description The rail-mountable and compact interface converters have been designed especially for industrial use in the switch cabinet or switch
More informationOvervoltage Protection Devices
Siemens AG 201 /2 Introduction /3 5SD7 lightning arresters, type 1 /5 5SD7 combination surge arresters, type 1 + type 2 /7 5SD7 combination surge arresters, type 1 / type 2 /9 5SD7 surge arresters, type
More informationRM17UAS. Product datasheet Characteristics. voltage control relay RM17-U - range V DC. Main. Complementary. Price* : 70.
Characteristics voltage control relay RM17-U - range 9..15 V DC Price* : 70.64 GBP Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters
More informationDEK-OV- 5DC/ 24DC/ 3. Extract from the online catalog. Order No.:
Extract from the online catalog DEK-OV- 5DC/ 24DC/ 3 Order No.: 2941361 The illustration shows the version DEK-OV- 24DC/24DC/3 Power optocoupler terminal block, input: 5 V DC, output: 3-30 V DC/3 A, terminal
More informationContact protection relay
Contact protection relay Ordering details SVR 450 08 F0000 The protects sensitive control contacts from excessive load. It can be used with latching function or without. Bounce time of control contacts
More informationTT-2-PE- 24DC. Extract from the online catalog. Order No.:
Extract from the online catalog TT-2-PE- 24DC Order No.: 2838186 Modular terminal block with three-stage surge protection for a floating double conductor, separate ground connection, nominal voltage: 24
More information