XS4-Locker 9000 Electronic Locker Lock Contactless MIFARE

Transcription

1 PROJECT NAME:... MODEL #:... APPLICATION:... DESCRIPTION:... ITEM #:... DATE:... /... / /8 4-1/8 2-21/ /32 19/ /16 1-3/16 1

2 The SALTO XS4 Locker is a locker lock designed to bring all the advantages of an electronic access control for lockers, and cabinets. Its ergonomic frontal knob has been designed to make easier the use of the locker. The electronical and mechanical components are located on the inside to enhance the security against vandalism or manipulation. The XS4-Locker 9000 uses DESfire Mifare RFID comunication and offers no end of interesting posibilities as multiaplication with other systems using the same card. Simple and intuitive use and the possibilities that the key can be any shape makes this system a good option for your special needs. The XS4-Locker is perfect for controlling access to lockers, cupboards, cabinets, cabins, boxes, show cases, where access control and full audit trailing are required, eg where valuables such as medical drugs, electronic equipment, museum pieces, confidential documentation, are stored. Access control features - Maximum number of users per door: 64,000 - Maximum number of doors per system: 64,000 - Maximum events on lock audit: 1,000 - Managed through SALTO software Pro Access or HAMS - Timezones: Timeperiods: 30 - Calendars in system: Zones in system: 1,024 - User groups: unlimited Opening modes - Fixed locker assignment where a specific ID credential operates a specific lock. - Free locker assignment where any ID credentials subsequently used to unlock a locker takes control. - Family option - Allows for multiple ID credentials to operate a single locker. - Emergency opening through Portable Programming Device (PPD). Mechanical features - Plastic cover characteristics: Highly resistant to chemicals, UV radiation and physical impacts. - Mechanism located on the inside and made of steel. - Inside cover measures: 3-15/16 x 4-11/32 x 1. - Outside Escutcheon measurements: 2-1/8 x 4-1/8 x 1-1/8. - Deadbolt projection: 19/32. - Sandwich construction with the reader on the outside and lock case on the inside. - Outer thumbturn with red & green indicator for availability of the locker, electronically managed release. - Cover colour: RAL 7016 Anthracite. - Surface mounted lock. Datasheet XS4_Locker - Eng - US

3 Electronic features - Read & Write I-locker Lock. - Wire free stand alone networked system though SVN technology. - Power supply: 3 alkaline batteries LR03 AAA 1.5V. optional lithium batteries FR03 - Audit of 1,000 last events. - Non volatile memory (is not deleted, even without power). - Locker lock equipped with a low consumption real time clock function, which allows time zones access planning and the use of 256 different calendars. - Acoustic LED to indicate lock authorization. - Possibility to enable/disable the acoustic signal. - Battery autonomy up to 30,000 openings. ID technology MHz contactless RFID identification, DESfire, DESfire EV1, Mifare, Mifare plus compatible. - Near Field Communication (NFC) compatible. - Key card available: 1Kbyte and 4Kbytes. - Key shape available: ISO 7810 Cards, fobs, bracelets, stickers, watches - Reusable key cards. - SALTO Virtual Network (SVN) compatible. - Read & Write technology, there s a contactless exchange of information between the card and the reader. - High security, by using password and encrypted Proximity cards. - Multiaplication with other systems using the same card through shared sectors. - Customized issuing card through the SALTO Authorization Media software (SAM). - Water proof cards which can be customized.

4 Installation 1- Mark the door with the SALTO template. 2- Drill the locker door as shown in the template. B B 7 mm [1/4"] deep, Hole only inside. O3 [1/8"] OUTSIDE INSIDE 3- Pass the cables through the drillings 4- "R" MOUNTING R = clik! "L" MOUNTING L = 5- Remark - No handing I closed open closed open Datasheet XS4_Locker - Eng - US

5 Most relevant features - Protection against manipulation and sabotage: XS4 Locker is carried out in sandwich construction. The shield with the turning knob and reader are placed on the outside, the locking mechanism and the electronic components with the battery pack are placed on the protected inside of the door. Manipulation and sabotage is only possible by leaving traces. - High operator convenience: The big turning knob is especially suited for elderly people or children. Even with wet hands (in baths) an easy use is guaranteed. The state of closure is indicated by a colour spot - red for locked or green for open, as well as by a melody. A refusal of a non-authorized ID-credential is also accompanied by a sound. - Low cost upgrading: The fastening screws on the inside are exactly adjusted to the dimensions of commercial locker locks and locks with coins. The outside shield may be mounted in an upright position or horizontally without any necessity to change the position of the lock case. Therefore the case makes it possible to cover holes made from previous locks without any difficulties. Use Just by presenting the card to the reader, the XS4 Locker will grant or deny access. The user is notified of the decision by both audible and visual signals. In R&W systems the XS4 locker will also record the event on the user card, record low battery status (if applicable) and update the latest black list of cancelled/deleted cards (SVN) in the locker. Certificates - EN Operating conditions External escutcheon: -4ºF / 158ºF Inner escutcheon: 32ºF / 122ºF -4ºF / 158ºF with lithium batteries (FR03 AAA). Salto Systems Inc McCall Drive - Suite 1 - Atlanta, GA Phone: (866) GO SALTO - Fax: (770) info@salto.us - Salto International Salto HQ, Spain - Salto Canada - Salto Mexico Salto Birmingham, UK - Salto Kuala Lumpur, Asia-Pacific Salto Melbourne, Sydney, Australia - Salto Dubai, Middle East Salto Netherlands - Salto Portugal - Salto Germany - Salto Denmark