MultiSwiss 6x16. Machine options. We keep you turning

Transcription

1 MultiSwiss 6x16 Machine options We keep you turning

2 Machine options Description Integrated X-Y numerical axes, position 3 Travel ± 15 mm. TB-DECO program is supplied (Not compatible with xxxx) Integrated X-Y numerical axes, position 4. Travel ± 15 mm. TB-DECO program is supplied (Not compatible with xxxx) Part separator and pneumatic chute for parts with a 40 mm max. length and chute of 70 mm max. Integrated carrousel, small capacity Integrated carrousel, small capacity. Specify the configuration of the baskets at the of order : - 5 x 270 cm 3 or 10 x 90 cm 3 or 20 x 50 cm 3 (requires 0100)

3 Description Integrated carrousel, large capacity. Includes 12 baskets of 1.7 L (requires 0100) (not compatible with 0110, 0115, 0125) Fixed re-chucking device mounted in position 1 (requires 0830 and 1200) Hydraulic loading device mounted in position 1, F16 collet not included. Recommended for bars at least Ø10 mm Mandatory for bars from Ø12 to 16 mm (requires ) Oil pan with grid

4 Machine options Description Status tower clamping collets Ø 4-16 available by 1 mm increment to be specified at time of order Clamping collet type F16 For hydraulic loading device Diameter to be specified at time of order clamping collets Ø 4-16 Grooved (by 1 mm) Ø to be specified at time of order

5 Description 1 re-chucking collet mounted on option 0200 Ø to be specified at time of order. Set of 6 clamping tubes Ø 15 (12-14) Set of 6 clamping tubes Ø 15 (12-14) Set of 6 clamping tubes Ø 12 (9-11) Set of 6 clamping tubes Ø 9 (6-8)

6 Machine options Description Set of 6 clamping tubes Ø 7 (4-6) Set of 6 clamping tubes Ø 5 (3-4) Set of 6 clamping tubes Ø 16,40 (15-16) Set of 6 reduction tubes Ø 15 (12-14)

7 Description Set of 6 reduction tubes Ø 12 (9-11) Set of 6 reduction tubes Ø 9 (6-8) Set of 6 reduction tubes Ø 7 (4-6) Set of 6 reduction tubes Ø 5 (3-4)

8 Machine options Description Set of 6 reduction tubes Ø 17 (15-16) pick up collet Ø 3-16 mm including blank ejector Collet Ø to be specified at time of order Turning tool holder, base (16x16) Additional turning tool holder (16X16) (requires 1010) (not compatible with 1200) Additional tool holder for drilling (16X16)

9 Description Additional tool holder for drilling (16X16) for short parts or short holes. (requires 1010 or 1020) (not compatible with 1200) Turning tool holder, base (16x16) for reversed rotation Transversal support for a HF spindle (not compatible with 1010, 1020) Cut-off tool holder monted on position

10 Machine options Description Support for 2 end units Ø 25 (not compatible with 0300, 1011, 1012, 1240) Clamping flange for HFspindle Ø25 mm. Needed with function Fixed end working drill holder Ø 25 with collet for ESX-16, 10 mm capacity. Pos. 2 to 5 (requires 1200) Support for 3 end units Ø 16 (not compatible with 0300, 1011, 1012, 1200)

11 Description Steady end working drill holder Ø 16 with collet for ESX-12, 7 mm capacity. Pos. 2 to 4 (requires 1240) Short steady end working drill holder Ø 16 with collet for ESX-12, 7 mm capacity. Pos. 2 to 5 (requires 1240) Support for tool holders in counter operation Counter operation tool holder for 16X16 cutting tool. (requires 1300)

12 Machine options Description Support for steady drill holder for counter operations. Thruspraying. (requires 1310) Steady drill holder for counter operations (requires 1330) Centering holder for the COP mounted in the 16x16 tool holder. (requires 1310) Double drill holders Ø 6 mm for the counter operation. (requires 1310 or 1450) (not compatible with 1330)

13 Description Reamer holder for counter operations (requires 1310 or 1450) (not compatible with 1330) Transversal support for a HF spindle in COP (requires 1300) (not compatible with 1310) Cross support for a Right Angle HF spindle for the COP. (Requires 1300) (not compatible with 1310 and 1450) GWS basic support mounted in position 1 to

14 Machine options Description Centering element for GWS basic support Protection of the GWS tool holder interface for turning (requires 1501) Not compatible with 1510) GWS turning tool holder 16x16 for MO and COP (requires ) (not compatible with 1503) Support for GWS cut off tool holder mounted in position

15 Description GWS cut off tool holder ISCAR type (requires 1540) Support with 2 axial bores Ø 25 (not compatible with 0300, 1240) GWS tool holder with 2 Ø 25 bores for fix drilling (requires 1551) (compatible with 1205 and 1220) GWS tool holder support for COP

16 Machine options Description GWS tool holder with 2 Ø 6 bores for fix drilling in COP (requires 1580) (not compatible with 1582) GWS tool holder with 1 Ø 12 bore for fix drilling in COP (requires 1580) (not compatible with 1581) Electrical interface for drilling or polygon attachments (DCS version). 2 attachments positions 3 to 5 (not compatible with 0001) Electrical interface for drilling or polygon attachments (DCS version). 2 additional attachments positions 2 and 5 (requires 2003)

17 Description Cross drilling attachment, ratio 1:1 Max RPM - max. 8.8 Nm Pos. 2 to 5 (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 2020, 2030, 2040) (not compatible with 2300, 2500) Cross drilling attachment, ratio 2:1 Max RPM - max. 4.4 Nm Pos. 2 to 5 Coolant through the center (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 2010, 2030, 2040) (not compatible with 2300, 2500) End drilling attachment, ratio 2:1 Max RPM - max. 4.4 Nm Pos. 2, 3, 4 (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 1200, 1205) (not compatible with 2010, 2020, 2040, 2300, 2500) Adaptation for 4 HF drilling attachments. (not compatible with 0752, 0753, 0755)

18 Machine options Description Drive for HF spindles (requires 2100) High frequency spindle RPM Nm (requires 1050 or 1205 or 1450) (requires 2110) High Frequency spindle 90 3,300-13,300 RPM Nm (Requires 1470) (requires 2110) FETTE T-120 thread rolling attachment

19 Description Milling attachment. For positions 2, 3, 4 or 5. Max RPM : 4,500 - Max 18 Nm a the tool. Max milling cutter Ø 50 mm. Max. width : 16 mm. (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 1200, 1205, 1501) (not compatible with 2010, 2020, 2030, 2040, 2300) Polygon attachment For positions 2, 3, 4 or 5. Max RPM - max. 8 Nm at tool Milling cutter Ø 80 mm max., max. width 12 mm. (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 1200, 1205) (not compatible with 2010, 2020, 2030, 2040, 2300) High pressure pump group 37,5 l/min. 40 bar (requires 3001 or 3003) (not compatible with 3020) High pressure pump group 26 l/min. 80 bar (requires 3001 or 3003) (not compatible with 3010)

20 Machine options Description Coolant fed, HP, rotating ejector. (requires 3010 or 3020) Chip tank recovery for paper Chip conveyor with belt *** and sump pump. (not compatible with 3100) Swarf tank for conveyor *** (requires 3200)

21 Description Additional roll of filter paper for the filtration device Replacement cartridge for the hydrostatic group filter (5 µm) Replacement cartridge for security filter for the hydrostatic group (20 µm) Group to produce cold water 33 kw, integrated to the container. (not compatible with 3601)

22 Machine options Description Fire fighting device KRAFT & BAUER *** Mechanical integration & interface included Extinction agent : CO 2 Use with a centralize air filtering system Fire fighting damper, with pneumatic activation (Not compatible with 3800 and 3802) Oilmist extractor 1400 m³/h (50 Hz) m³/h (60 Hz). Electrostatic filter Horizontal version, total height 2,9 m Electric tool breakage detector Middex type WK2. Detection of 1 tool per position max. Position 1 to

23 Description Tool pre-setter MultiSwiss *** (requires 4510) Adaptation to pre-set tools for tool pre-setter MultiSwiss Adaptation to pre-set Multiswiss tools for tool pre-setter Multi Spindle centering system - Mowidec

24 Machine options Description System for tool management Function axis C in main operations 6 spindles/increment 0,001 degree Function axis C in counter-operations 1 spindle/increment 0,001 degree Polar Milling function in polar coordinates (interpolation of the axis C with a linear axis) (requires ) Distance Angle

25 Description Machine warm up Automatic turn ON of the warm up cycle (requires ) C Remote Assistance Service allowing TORNOS the remote visualization of the machine CNC screen. Out of warranty intervention time included (requires a connection to the Internet) Router ethernet for remote maintenance secured Service allowing the visualization At a distance screens CNC by TORNOS (require connection to an Internet network) Software package all inclusiv - Remote assistance - Machine warm up - System of tool manager - Milling function in polar coordinates - Function C axis in main operations in counter operation

26 We keep you turning tornos.com TORNOS SA Rue Industrielle 111 CH-2740 Moutier Phone +41 (0) Fax +41 (0) Tornos throughout the world Conforms to the European CE / CEM Safety Standards This document is based on information available at the time of publication. While every effort has been made to be accurate, the information contained herein does not purport to cover all details or variations in hardware and software, nor to provide for every possible contingency in connection with installation, operation and maintenance. TORNOS SA assumes no obligation of notice to holders of this document with respect to changes subsequently made. TORNOS SA makes no representation or warranty, expressed, implied, or statutory with respect to, and assumes no responsibility for the accuracy, completeness, sufficiency or usefulness of the information contained herein. No warranties of merchantability nor fitness for purpose shall apply. Edition Mars 2016 Tornos 2016, All rights reserved cm