Metering. Lovato E-1 Socomec E-7. Modular energy (kwh) meters. Lovato E-2 Socomec E-8. Modular multi-meters. Lovato E-3 4 Socomec E-8 9

Transcription

1 7% Metering E Modular energy (kwh) meters Lovato E-1 Socomec E-7 Modular multi-meters Lovato E-2 Socomec E-8 Panel mount network analysers Lovato E-3 4 Socomec E-8 9 Digital panelmeters Lovato E-5 6 Digiware power montoring system Socomec E Current transformers (CT's) MBS E EM E-20 Split core (CT's) MBS E-18 J&D E-20 Analog panel meters EM E-21 Portable network analysers Circuitor E-22 Power analyser Socomec E-23

2 Energy meters (kwh meters) Energy meters are digital instruments for the measurement of electrical energy consumption in single and three phase systems with direct connection or via current transformer (CT) Digital meters with LCD screen static module type input description pulse width x current output 18 mm DMED110T1 Single phase direct connection 40/63A Rated supply voltage: VAC % Input current: 40/63A (direct connection) Active energy: Class 1 (IEC/EN ) Reactive energy: Class 2 (IEC/EN ) Compliant with standards: IEC/EN , , (modular design DIN rail mountable) DMED100T1 40A direct connection digital energy meter Multi-measurements: Total and partial active, reactive energy, active, reactive power, voltage, current and power factor. DMED110T1 40A direct connection digital energy meter DMED120T1 63A direct connection digital energy meter DMED121 63A as above with RS485 interface DMED130 63A expandable with EXM1001 module DME120T1 3 phase direct connection 63A/80A (modular design DIN rail mountable) Multi-measurements: Total and partial active, reactive energy, active, reactive power, voltage, current and power factor. Graphic backlit LCD screen with 6+1 digits Tariff selection (2 tariffs) DMED300T2 63A 3ph+N digital energy meter DMED301 80A 3ph+N digital energy meter (RS485) phase CT connection /5A (modular design DIN rail mountable) Multi-measurements: Total and partial active, reactive energy, active, reactive power, voltage, current and power factor. DMED300T2 Backlit LCD screen (128 x 80 pixels) DMED310T2 /5A 3ph digital energy meter DMED330 /5A 3ph digital energy meter (RS485) Accepts EXM... (up to 3) plug-in optic expansion modules Data concentrator (modular design DIN rail mountable) DMECD data concentrator designed in combination with energy meters, permitting connection to (up to 8) devices, eliminating online communication interface requirements. The concentrator is able to count static pulse outputs from the connected energy meters, storing data for viewing on its display or directly on a PC through the built-in RS485 port, using Xpress software. DMECD Graphic backlit LCD screen (128 x 80 pixels) 8 inputs for pulse count, expandable up to 14 using EXM type expansion modules 8 total and 8 partial energy meters Built-in RS485 interface (Modbus-RTU or ASCII) Expandable with EXM... (up to 3) plug-in optic expansion modules DMECD data concentrator for up to 8 connected energy meters EXM1000 Expansion modules for DMED310T2 and DMECD (modular design DIN rail mountable) EXM digital inputs and 2 static outputs, opto-isolated EXM opto-isolated digital inputs and 2 relay outputs (5A 250 VAC) EXM1010 opto-isolated USB interface EXM1011 opto-isolated RS232 interface EXM1012 opto-isolated RS485 interface EXM1013 opto-isolated Ethernet interface with Web server function EXM1020 opto-isolated RS485 interface and 2 relay outputs (5A 250 VAC) EXM1030 data storage, clock-calendar (RTC) with backup for data logging E-1 Above s do not include VAT. E&OE

3 DMG series digital multimeters / Power analysers new DMG digital multimeters and power analysers are equipped with a digital LCD display providing extremely clear, intuitive and flexible viewing of all electrical parameters in an installation. DMG digital multimeters in a modular housing (4 modules wide) Modular DIN rail mounting (aligns with standard MCB 45mm cutout) Accuracy: Voltage/Current: ±0.5% (True RMS measurements) Power: ±1% f.s. Frequency: ±0.05% Active energy: Class 1 Metering DMG100 Main measurements: - Voltage: phase, line and system values - Current: phase values (neutral current calculated) - Power: apparent, active and reactive phase and total values - Power Factor (PF) per phase and total - Frequency of measured voltage value - HIGH-LOW-AVERAGE value functions of all measurements - Maximum demand of power and current values - Asymmetric voltage and current - Total harmonic distortion (THD) of voltage and current values - Energy meters for active, reactive and apparent values - Hour counter (total and partial) type description module width x 18 mm DMG200 DMG100 series LCD multimeters economical with icon display Auxiliary power supply: VAC / VDC Input current: CT - 1A or 5A Voltage measurement: VAC L-L Harmonic analysis of V and I up to the 15th order DMG100 modular power analyser DMG110 modular power analyser with RS485 interface DMG200 series LCD multimeters Auxiliary power supply: Input current: Voltage measurement: with graphic backlight LCD display VAC / VDC CT - 5A VAC L-L DMG300 DMG200 modular power analyser DMG210 modular power analyser with RS485 interface DMG300 series (expandable) with graphic backlight LCD display Auxiliary power supply: VAC / VDC Input current: CT - 1A or 5A Voltage measurement: VAC L-L / VAC L-N Optional communication ports: USB, RS232, RS485, Ethernet Harmonic analysis of voltage and current up to the 31 order Energy meters for active, reactive, apparent power with programmable tariff function Accuracy: voltage/current ±0.2% power/power factor ±0.5% frequency ±0.05% active energy class 0.5S (IEC/EN ) EXM1000 DMG300 modular power analyser (up to 344 measured quantities) Accepts EXM...(up to 3) plug-in optic expansion modules Expansion modules and accessories for DMG300 EXM8004 sealable terminal cover for DMG200/210/ EXM1010 EXM digital inputs and 2 static outputs, opto-isolated EXM opto-isolated digital inputs and 2 relay outputs (5A 250 VAC) EXM1010 opto-isolated USB interface EXM1011 opto-isolated RS232 interface EXM1012 opto-isolated RS485 interface EXM1013 opto-isolated Ethernet interface with Web server function EXM1020 opto-isolated RS485 interface and 2 relay outputs (5A 250 VAC) EXM1030 data storage, clock-calendar (RTC) with backup for event logging Above s do not include VAT. E&OE E-2

4 DMG series digital multimeters / Power analysers new Flush mounting expandable digital multimeters (96 x 96 mm) Rear expansion slots accept plug-in modules suitable for numerous applications True RMS measurements of voltage and current values Main measurements and functions : DMG Voltage: phase, line and system values - Current: phase values (neutral current calculated) - Power: apparent, active and reactive phase and total values - Power Factor (PF)per phase and total - Frequency of measured voltage value - HIGH-LOW-AVERAGE value functions for all measurements - Maximum demand of power and current values - Voltage and current asymmetry - Total harmonic distortion (THD): voltage and current - Energy meters with programmable tariff functions - Hour counter for programmable total and partial hours type description expansion slots DMG600 series economical with backlit LCD icon display Harmonic analysis of voltage and current up to the 15 order Auxiliary power supply: VAC / VDC Input current: CT - 1A or 5A Voltage measurement: VAC L-L Accuracy: Voltage/current ±0.5% Power/power factor ±1% f.s. Frequency ±0.05% Active energy Class 1 (IEC/EN ) Reactive energy Class 2 (IEC/EN ) DMG600 digital panel mount power analyser DMG610 digital panel mount power analyser (with RS485 port) Expandable with EXP module (1) DMG700 series with backlit graphic LCD display DMG 700 Auxiliary power supply: VAC / VDC Input current: CT - 5A Voltage measurement: VAC L-L / VAC L-N Pulse counter for consumption of water, gas, etc., (only with expansion module) Accuracy: Voltage/current ±0.5% Power ±1% f.s. Frequency ±0.05% Active energy Class 1 (IEC/EN ) Reactive energy Class 2 (IEC/EN ) DMG700 panel mount power analyser Expandable with EXP module (up to 4 modules) DMG800 series with backlit graphic LCD display Graphic LCD display Harmonic analysis of voltage and current up to the 31 order Auxiliary power supply: VAC / VDC Input current: CT - 1A or 5A Voltage measurement: VAC L-L / VAC L-N Accuracy: Voltage/current ±0.2% Power/power factor ±0.5% Frequency ±0.05% Active energy Class 0.5S (IEC/EN ) Reactive energy Class 2 (IEC/EN ) DMG800 panel mount power analyser DMG 800 DMG800D048 (as above but with 9-70 VDC supply) Expandable with EXP module (up to 4 modules) E-3 Above s do not include VAT. E&OE

5 DMG series digital multimeters / Power analysers DMG900 Flush mounting expandable digital multimeters (96 x 96 mm) Graphic touch-screen LCD display for extremely simple interaction Rear expansion slots accept plug-in modules suitable for numerous applications True RMS measurements of voltage and current values Main measurements and functions : - Voltage: phase, phase-neutral and ground neutral-earth - Current: phase values - Neutral current calculated and true values - Power: apparent, active and reactive phase and total values - P.F. Power Factor per phase and total - Cosφ per phase - Frequency of measured voltage value - Voltage and current asymmetry - Total harmonic distortion (THD) of voltage and current - Harmonic analysis of voltage and current up to the 63 order - HIGH-LOW-AVERAGE value functions for all measurements - Maximum demand of power and current values - Energy meters with programmable tariff functions - Hour counter for programmable total and partial hours - Pulse counter for consumption of water, gas, etc., (only with expansion module) - Energy quality analysis to EN (only with expansion module) Metering type description expansion slots DMG900T DMG900 series Graphic touch-screen LCD display Auxiliary power supply: VAC / VDC Input current: CT - 1A or 5A Voltage measurement: VAC L-L / VAC L-N Accuracy: voltage/current ±0.2% power/power factor ±0.5% f.s. frequency ±0.05% active energy Class 0.5S (IEC/EN ) reactive energy: Class 2 (IEC/EN ) DMG900 panel mount power analyser DMG900D048 (as above but with 9-70 VDC supply) DMG900T DIN rail mount measurement transducer (expandable) DIN rail mounting measurement transducer for chassis mounting, incorporating 4 expansion slots to accommodate expansion modules for added I/O's or communication requirements. DMG900T panel mount power analyser DMG900TD048 (as above but with 9-70 VDC supply) DMG900RD remote panel mount (96 x 96 mm) touch screen display for above DMG900T Expansion modules and accessories for DMG700/800/900 (up to 4 per meter) DMG900RD Inputs and outputs EXP digital opto-isolated inputs EXP static opto-isolated outputs EXP digital inputs and 2 static outputs, opto-isolated EXP output relays (5A 250 VAC) EXP analog opto-isolated inputs 0/4-20mA or 0-5/10V (only for DMG800/900) EXP analog opto-isolated outputs 0/4-20mA or 0-5/10V (only for DMG800/900) Communication ports EXP1010 opto-isolated USB interface EXP1011 opto-isolated RS232 interface EXP1012 opto-isolated RS485 interface EXP1013 opto-isolated Ethernet interface EXP1014 opto-isolated Profibus-DP interface (only for DMG800/900) EXP1015 GPRS/GSM modem without antenna EXP1030 data storage, clock-calendar (RTC) with backup for data logging EXP1031 as above with energy quality (EN 50160) (only for DMG900/900T) Software and accessories for DMG300/700/800/900 EXP1000 C2 PC - RS232 connecting cable (1.8m) C5 RS232 analog modem cable (1.8m) C9 cable PC - analog modem cable (1.8m) CX03 GSM Quad-band antenna for EXP1015 (850/900/1800/1900/2100MHz) Above s do not include VAT. E&OE E-4

6 Digital meters (measuring and monitoring instruments) DMK modular digital monitoring devices Modular DIN rail mounting (3 modules 54 mm wide) Auxiliary supply: VAC Memorises minimum and maximum measured values (since last reset) Instantaneous or preset trip delays (0-900sec) 1 changeover relay output (8A 250 VAC) type description monitored range DMK80R1 Voltage monitors (measures and displays single and three phase voltages) Overvoltage range: Off / % (delay 0-900sec) Undervoltage range: Off / 70-98% (delay 0-900sec) Voltage/phase loss or failure: Off / 5-85% (delay 0-900sec) Programmable PT ratio : (accuracy: ±0.25% f.s. ±1digit) DMK80R1 1-phase over/under voltage meter/monitor VAC DMK70R1 3-phase over/under voltage meter/monitor VAC Current monitors (measures and displays single and three phase currents) Measurement range: 0.05A A (CT ratio: A) ±0.5% Overcurrent range: Off / % (delay 0-900sec) Undercurrent range: Off / 5-98% (delay 0-900sec) Instantaneous tripping: Off / % DMK81R1 1-phase over/under current meter/monitor 0.05A A DMK71R1 3-phase over/under current meter/monitor 0.05A A DMK81R1 Frequency monitors (measures and displays line frequency) Measurement range: 0.05A A (CT ratio: A) ±0.5% DMK83R1 frequency meter/monitor 45-65Hz Three-phase multi-measurement instrument Measurement range: Voltage Phase loss or failure: Off / 5-85% VAC Maximum voltage: Off / % Minimum voltage Off / 70-98% Asymmetry: Off / 2-20% Phase sequence: Off / L1-L2-L3 / L3-L2-L1 DMK83R1 Current Current loss: Off / 2-100% A Maximum current: Off / % Maximum current instantaneous trip: Off / % Power Rated power: Maximum power: Off / % Max power instantaneous trip: Off / % Minimum power: Off / 10-99% Frequency Maximum frequency: Off / % 45-65Hz Minimum frequency: Off / 90-99% DMK75R1 3-phase multi measurement digital meter/monitor DMK75R1 E-5 Above s do not include VAT. E&OE

7 Digital panel meters (measuring and monitoring instruments) DMK00R1 Digital panel meters Panel mount (H) 48 x (W) 96 mm Auxiliary supply VAC (others on request) True RMS measurements Class 0.5 (±0.25% full scale ± 1 digit) Memory storage of maximum and minimum values 1 changeover relay output 8A 250 VAC 1 Flush 96 x 48 mm panel mounting Programmable time delay for max, min or voltage/current loss (0-900 sec) Metering type description output Voltmeters (panel mounting 96 x 48 mm) Voltage measurement range: VAC Operating frequency range: 45-65Hz Programmable VT ratio: Accuracy: ±0.25% f.s. ±1 digit monitored range DMK00 single phase digital voltmeter meter only VAC DMK10 three phase digital voltmeter meter only VAC Voltmeter / monitor 1 changeover relay output time delay DMK10R1 Settings Voltage loss or failure: % Ue (0-900sec) Maximum voltage: 5-85% Ue (0-900sec) Minimum voltage: 70-98Ue (0-900sec) DMK00R1 single phase digital voltage monitor relay out VAC DMK10R1 three phase digital voltage monitor relay out VAC Ammeters accuracy: ± 0.5% full scale ± 1 digit Current measurement range: A Operating frequency range: 45-65Hz Programmable CT ratio: Accuracy: ±0.5% f.s. ±1 digit DMK01 single phase digital ammeter only meter only A DMK11 three phase digital ammeter only meter only A DMK01R1 Ammeter / monitor 1 changeover relay output time delay Settings Current loss: Off / 2-100% (0-900sec) Maximum current: Off / % (0-900sec) Instantaneous trip:: Off / % Minimum current: Off / 5-98% (0-900sec) DMK01R1 single phase digital current monitor relay out A DMK11R1 three phase digital current monitor relay out A Frequency meter Measurement input: Frequency measure range: Accuracy: accuracy: ± 1 digit VAC 15-65Hz ±1 digit DMK03R1 DMK03 digital frequency meter only meter only 15-65Hz Frequency meter / monitor 1 changeover relay output time delay Settings: Maximum frequency: Off / % ( sec) Minimum frequency: Off / 90-99% ( sec) DMK03R1 digital frequency monitor relay output 15-65Hz Multi-meter combination voltage, current, power factor Voltage: phase-to-phase values Power factor Current: 3 phase Frequency Active, reactive, apparent power and energy Hour counter DMK11R1 Voltage measurement range: VAC Current measurement range: A Operating frequency range: 45-65Hz Programmable VT ratio: Programmable CT ratio: DMK16 three-phase multi-meter only meter only multi-meter DMK16R1 three-phase multi-meter and monitor relay out multi-meter Above s do not include VAT. E&OE E-6

8 COUNTIS active energy meters (kwh meters) COUNTIS Active energy meters (kwh meters) Energy meters are digital instruments for the measurement of electrical anergy consumption in single and three phase systems with direct connection or via a current transformer (CT) type current reading RS485 dual width in description modbus tariff 17.5 mm Single phase direct connection kwh meters (modular design DIN rail mounting) LCD display Measurement accuracy: 1 % Rated supply voltage: 230 VAC Pulse output: 100Wh Active energy: Class 1 (IEC/EN ) class B (EN 50470) new E00 32A direct no no single phase kwh meter E03 40A direct yes yes single phase kwh meter E10 63A direct no no single phase kwh meter E11 63A direct no yes single phase kwh meter E13 80A direct yes yes single phase kwh meter E17 80A direct no yes single phase kwh meter Ethernet web server embedded Three phase kwh meters (modular design DIN rail mounting) Backlit LCD display Rated supply voltage: VAC Pulse output: 100Wh Phase/neutral inversion protection Detection of connection errors Measurement accuracy: 1 % Bidirectional (energy consumption and production) E27, E33, E45 only Active energy: Class 1 (IEC/EN ) class B (EN 50470) E20 63A direct no no three phase kwh meter E21 63A direct no yes three phase kwh meter E23 80A direct yes yes three phase kwh meter E27 80A direct no yes three phase kwh meter E30 100A direct no no three phase kwh meter E31 100A direct no yes three phase kwh meter E33 100A direct yes via com three phase kwh meter Ethernet web server embedded Note MID compliant devices available on request. CT operated.../5a E40../5A CT no no three phase kwh meter E43../5A CT yes via com three phase kwh meter E45../5A CT yes via com three phase kwh meter Mbus Pulse concentrator (modular design DIN rail mounting) COUNTIS ECi2 multi-utility pulse concentrator allows for up to 7 pulse inputs from water, gas, compressed air and electricity meters to be registered and stored. All data can be centralised via RS485 communication using MODBUS protocol Load curves are available for each of the 7 logical inputs Partial, total, daily, weekly or monthly kwh or other types of data (litres, m 3 ) Customisation by selection of the measuring unit: kwh, m 3, litres Generate event alarms (1 dedicated relay output) VAC supply ECi2 yes pulse concentrator for up to 7 inputs E-7 Above s do not include VAT. E&OE

9 DIRIS multi-function meters (PMD) DIRIS multi-function meters Compact and ergonomic, the DIRIS multifunction meter specially adapted for monitoring and managing electrical energy. Its communication function allows the analysis of data collected via a PLC energy management software. Compact: Compliant: Advanced: RS485: Ease of use: Panel or Din rail mount options enables easy integration into any type of electrical cabinet IEC high-level standard for all PMDs (Performance Monitoring Devices) Programmable input and output as standard including pulse metering, alarm report and pulse output Communication permits the extraction of data and device configuration remotely. Permits easy navigation via direct keys and easy to read backlit LCD screen display Metering new Multi-measurement (model dependant) Current - Instantaneous and maximum average I1, I2, I3, In Voltage and frequency - Instantaneous V1, V2, V3, U12, U23, U31,F Frequency - 45~65 Hz Power - Instantaneous and maximum average 3P, ΣP, 3Q, ΣQ, 3S, ΣS Power factor - Instantaneous 3PF, ΣPF and maximum average Energy - Active energy: +/- kwh Reactive energy: +/- kvarh - hours Harmonic analysis - THD Current, voltage, phase-to-phase voltage Events - Alarms on all electrical values Energy accuracy - Active energy class auxiliary number type power plug-in description supply modules DIRIS A10 multi-function meter DIN rail mount The DIRIS A10 is a modular multifunction meter for measuring electrical values in low voltage networks. It allows all electrical parameters to be displayed and utilised for communication and/ or output functions. Navigation is via 5 direct access keys and easy to read screen display Harmonic analysis up to (level 51) Integrated temperature sensor Detects wiring errors to automatically correct CT installation errors Dual tariff selection Dimensions: 72 x 90 mm x 64 mm deep VAC 4 A10 72 x 90 mm DIN rail mount multifunction meter VAC 4 A10 as above with RS485 MODBUS comms Available in light grey on request DIRIS A14 multi-function meter DIN rail mount DIRIS A14 with MID certification provide the guaranteed accuracy required for applications in which sub-billing of the electrical energy consumed is necessary. A14 Bi-directional metering (four quadrants) function is for measuring energy production or consumption. Auxiliary power supply : Self supply Display of electrical values ( I,U,V, ΣP, ΣQ, ΣQ, ΣS, PF) and P + load curve Over a 7 day period via communication Total and partial metering +/- Kwh +/- Kvarh Harmonic analysis (via comm) up to level 63 Multi traffic functions (via comm.) selection of one our of four billing tariffs Dimensions: 72 x 90 mm x 64 mm deep to 460 VAC +/- 15% 4 A14 72 x 90 mm MID + RS485 MODBUS comm DIRIS A17 multi-function meter panel mount The DIRIS A17 compact meter includes a programmable input and output as standard on all versions, functions include pulse metering, alarm report and pulse output. Navigation is via 4 direct access keys and easy to read screen display Harmonic analysis up to (level 31) Dimensions: 72 x 72 mm x 60 mm deep VAC A17 72 x 72 mm panel mount multifunction meter VAC A17 as above with RS485 MODBUS comms Above s do not include VAT. E&OE E-8

10 DIRIS multi-function meters (PMD) auxiliary number type power plug-in description supply modules DIRIS A20 multi-function meter panel mount DIRIS A20 multifunction meters are panel mounted measurement units which ensure the user has access to all the measurements required for successfully carrying out energy efficiency projects and ensuring the electric distribution is monitored Detects wiring errors to automatically correct CT installation errors Hours metering Harmonic analysis up to (level 51) Accepts 1 x functional plug-in module for 1 x output or RS485 MODBUS communication Dimensions: 96 x 96 mm x 60 mm deep VAC 1 A20 96 x 96 mm panel mount multi-function meter DIRIS A40/41 multi-function meter panel mount The Diris A40/41 series provides access to all measurements required for successfully carrying out energy efficiency projects for electrical distribution monitoring, the units are easily customisable or upgradeable through optional plug-in modules (up to 4). A41 has CT current input for measuring neutral current as well Provides accurate instantaneous, average and maximum levels of most important measurements Metering Active, reactive and apparent energy with hours Harmonic analysis up to (level 53) Provide load curves of Active/Reactive power with voltages and frequency Internal temperature and external temperature (via 3 PT100 sensors) Accepts 4 x functional plug-in modules Dimensions: 96 x 96 mm x 60 mm deep VAC 4 A40 96 x 96 mm panel mount multi-function meter VAC 4 A41 as above with neutral monitoring VDC 4 A40 96 x 96 mm panel mount multi-function meter VDC 4 A41 as above with neutral monitoring DIRIS A60 multi-function meter energy monitoring and event analysis The Diris A60 incorporates all functions of the A40 with additional enhanced data logging functions, recording curves for quality events. All information can be analysed remotely using freely downloadable analysis software from the SOCOMEC website. Indicates current and voltage imbalances and tangent φ Stores load curves (60 days with intervals of 10 mins) for active, reactive, apparent power Detects and stores last 40 events - overvoltage, voltage dips, cut-offs, overcurrent for each stored event A60 records the relevant RMS 10ms interval curves Dimensions: 96 x 96 mm x 60 mm deep VAC 4 A60 96 x 96 mm panel mount multi-function meter Accessories for DIRIS meters Plug-modules (for customisation or upgrading of meters) type function description for model x output plug-in optional modules A RS485 MODBUS comms plug-in optional modules A configurable pulse outputs plug-in optional modules A40/41/A RS485 MODBUS comms plug-in optional modules A40/41/A Analog outputs plug-in optional modules A40/41/A inputs / 2 outputs plug-in optional modules A40/41/A Sub D9 PROFIBUS DP comm plug-in optional modules A40/ Memory plug-in optional modules A40/ Ethernet communication with Embedded Webserver function A40/41/A Ethernet + RS485 MODBUS with Embedded Webserver function A40/41/A IP65 protection IP65 protection cover for DIRIS meters A40/41/A E-9 Above s do not include VAT. E&OE

11 Introducing Digiware (measurement and monitoring for electrical installations) The DIRIS Digiware is a multi-circuit power monitoring device that is the most effective solution for metering consumption. Measuring and monitoring the quality of electrical energy in industrial and commercial applications. Can monitor several circuits via a single current measurement module thanks to independent current inputs Implementation in a quarter of the time vs existing metering technologies Accuracy as per standard IEC (Class 0.5) Installation of measurement modules and current sensors at the closest point to the load Compact and flexible design: suitable for new and existing installations including panels with space restrictions Build a system: Metering Display/ No display module Voltage measurement module Multiple current measurement modules Current sensors The solution for Industry Building Infrastructure Local authority Advantages Multi-circuit Global accuracy class 0.5 Cost effective and flexible Plug & play new type Control and power supply interface description Power supply 24 VDC (required see page B-56) Communication via RS485 Modbus and Digiware BUS C-31 data Interface system No-display mode Centralises all of the systems' data on MODBUS RS485 module width modular centralisation unit 18 mm D-40/50 centralisation and display of data panel mount 96 x 96 mm High-resolution LCD display Local view of data from the voltage and current modules Keys on the front face for direct access to, measurement data,circuit selection,device configuration Power supply 24 VDC (required see page B-56) D centralisation unit with multi-point display and RS485 output D centralisation unit with multi-point display and Ethernet communication (Modbus TCP) C-32 range extending repeater Required when Digiware bus length exceeds 100m Maximum bus length 300m (2 repeaters) Power supply 24 VDC (required see page B-56) range extending repeater 18 mm Note: For RJ45 connecting cables for above see E-12 E-10

12 Digiware power monitoring / energy management new Voltage measurement modules 1 single voltage measurement point for the entire system. A complete,dedicated solution for : metering,voltage monitoring,quality analysis of the voltage RJ45 bus allows you measurement of voltage as well as supply power to all connected devices 3 phase voltage and frequency monitoring type description module width U-10 metering module modular voltage measurement metering module 18 mm U-20 monitoring module (as above but with additional 3ph THDu monitoring) modular voltage measurement monitoring module (harmonics) 18 mm U-30 analysis module (all electrical parameters including history of average values) modular voltage measurement analysis module 18 mm Current measurement modules TE... Allocates the load to be measured or to monitor independent current inputs i.e three-phase load and 3 single-phase loads. A complete,dedicated solution for : metering,voltage monitoring,quality analysis of the voltage RJ45 and RJ12 rapid connection and automatically configures connected current sensors Wiring errors are also prevented and implementation is simplified Metering: ± kwh, ± kvarh, kvah Multi-measurement: I1, I2, I3, In, ΣP, ΣQ, ΣS, ΣPF type I-30/60 metering modules description current inputs module width I-30 modular current measurement metering module 3 18 mm I-60 modular current measurement metering module 6 36 mm I-31/61 metering and load curve modules I-31 modular current measurement metering module 3 18 mm I-61 modular current measurement metering module 6 36 mm I-35/45 analysis module (all electrical parameters including history of average values) I-35 modular current measurement analysis module 3 18 mm I-45 modular current measurement analysis module 4 27 mm Current sensors TE 90 Various types of current sensors can be connected to the Solid TE,split-core TR,TF current sensors. These sensors automatically recognizes the sensor size and type and can be adapted to all types of new and existing installations. Plug and play RJ12 connections (for ease of wiring preventing wiring errors) Automatic detection of sensor type and current rating type model nominal pitch hole size description current (A) (mm) (mm) TR... TF... TE - solid current sensors Suitable for new installations - match the pitch of protective devices TE solid current sensor 18 Ø TE solid current sensor 18 Ø TE solid current sensor TE solid current sensor TE solid current sensor TE solid current sensor TE solid current sensor TR - split-core current sensors TR split-core current sensors Ø TR split-core current sensors Ø TR split-core current sensors Ø TR split-core current sensors Ø TF - flexible current sensors (Rogowski coil) TF flexible current sensors Ø TF flexible current sensors Ø TF flexible current sensors Ø E-11 Above s do not include VAT. E&OE

13 Digiware power monitoring / energy management new type model description Cables and accessories for current sensor RJ12 current sensor connection Automatic detection of ratings Identification of cables by colour-coding Disconnection of the current sensor secondary under load cable length pack size Metering RJ12 RJ RJ12 current sensor connection cable 0.2 m (3x cables) RJ12 current sensor connection cable 0.5 m (3x cables) RJ12 current sensor connection cable 1.0 m (3x cables) RJ12 current sensor connection cable 2.0 m (3x cables) RJ12 current sensor connection cable 1.0 m (6x cables) RJ12 current sensor connection cable 2.0 m (6x cables) RJ12 current sensor cable + 50 connectors 50 m (cable roll) RJ45 current sensor connection Interconnection of I and U modules via Digiware bus Auto-configuration of parameters: Network and load type - addressing of devices connected to the bus RJ45 Digiware bus connection cable 0.1 m RJ45 Digiware bus connection cable 0.5 m RJ45 Digiware bus connection cable 1.0 m RJ45 Digiware bus connection cable 2.0 m RJ45 current sensor cable + 50 connectors 50 m (cable roll) Maximum cable distance between current measurement modules and current sensors is 10 m A/CT adapter (measurement >1000 A) coupling link for interconnecting sensors staggered or linear mounted (30pcs) sealable cover (guarantees the immunity of sensor connection) (20pcs) Communication gateways wireless and cabled RS485 to Ethernet DIRIS G communication gateways communicate all information from metering and measurement devices wirelessly or via RS485 bus, centralised in a single device and made available on the Ethernet network via Modbus TCP. The gateway has an embedded WEBVIEW web server, permitting real time monitoring of electrical values and analysis of consumption data. Plug and Play automatic detection and addressing of measurement and metering devices Automatic recording and storage of measurements and consumption data, sending of alarms Ethernet/RS485 Modbus communication with embedded WEBVIEW power monitoring type description module width Consumption history (Webview) DIRIS G power and energy monitoring communication gateway 62 mm DIRIS G-60 wireless (radio frequency) and cabled RS485 to Ethernet power and energy monitoring communication gateway 62 mm Power monitoring device (stand alone unit) The DIRIS B-30 is a PMD in modular format that communicates wirelessly or via RS485. The 4 RJ independent current inputs allows it to manage several types and number of circuits i.e 4 single-phase loads or 1 three phase load + 1 single-phase load (compatible G-50 /60) B-30 RS RS485 MODBUS communication 54 mm B-30 RF Radio Frequency communication (wireless) 54 mm B-30 RS D-30 single point display for B-50 panel mount 96 x 96 mm RJ9 cable for above D-30 display unit 1.5m RJ9 cable for above D-30 display unit 3.0m Above s do not include VAT. E&OE E-12

14 Current transformers Made in Germany General specifications Nominal frequency: Isolation class: Nominal thermal short-time current: Maximum operating voltage: Over-current limiting factor: 50Hz (others on request) E Ith = 60 x In Um 0.72 kv FS 5 up to 1500 A nominal current MBS AG conform fully to: DIN VDE 0414/1 - DIN IEC 61869/1+2 - VBG 4 ASR 20.3 type ratio description class VA dimensions (mm) (H) (W) (D) Tube/ring type 5A secondary - class 1 ASR 20.3 tube Ø round conductor: 21 mm /5A tube current transformer /5A tube current transformer /5A tube current transformer /5A tube current transformer /5A tube current transformer /5A tube current transformer /5A tube current transformer DIN rail adaptor for above ASK 31.3 Busbar mounted 5A secondary - class 1 ASK 31.3 Primary bar conductor: 30 x 10 / 20 x 20 mm Ø round conductor: 26 mm /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer DIN rail adaptor for above ASK 41.4 ASK 41.4 Primary bar conductor: 40 x 10 / 30 x 10 mm Ø round conductor: 32 mm /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer DIN rail adaptor for above ASK 51.4 Primary bar conductor: 50 x 10 / 40 x 20 mm Ø round conductor: 44 mm ASK /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer E-13 Above s do not include VAT. E&OE

15 Current transformers Made in Germany type ratio description class VA dimensions (mm) (H) (W) (D) ASK 61.4 Primary bar conductor: 60 x 10 / 50 x 20 mm Ø round conductor: 44 mm /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer Metering ASK 61.4 Standard 5A secondary - class 1 ASK 81.4 Primary bar conductor: 80 x 10 / 60 x 30 mm Ø round conductor: 55 mm /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer ASK ASK Primary bar conductor: 100 x 10 / 80 x 30 mm Ø round conductor: 70 mm /5A std current transformer /5A std current transformer /5A std current transformer ASK Primary bar conductor: 100 x 30 / 80 x 50 mm Ø round conductor: 85 mm /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer Rectangular shaped 5A secondary - class 1 ASK 41.4 ASK Primary bar conductor: 103 x 41 mm Ø round conductor: 40 mm /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer ASK Primary bar conductor: 128 x 38 mm Ø round conductor: 38 mm /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer ASK Above s do not include VAT. E&OE E-14

16 Current transformers Made in Germany type ratio description class VA dimensions (mm) (H) (W) (D) ASK 41.4 Class 0.5 5A secondary ASK 41.4 (class 0.2 available on request) Primary bar conductor: 40 x 10 / 30 x 10mm Ø round conductor: 32 mm /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer ASK 51.4 Primary bar conductor: 50 x 10 / 40 x 20mm Ø round conductor: 44 mm /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer ASK 61.4 Primary bar conductor: 60 x 10 / 50 x 20mm Ø round conductor: 44 mm /5A std current transformer /5A std current transformer /5A std current transformer ASK ASK 81.4 Primary bar conductor: 80 x 10 / 60 x 30mm Ø round conductor: 55 mm /5A std current transformer /5A std current transformer /5A std current transformer ASK Primary bar conductor: 100 x 30 / 80 x 50mm Ø round conductor: 85 mm /5A std current transformer /5A std current transformer /5A std current transformer /5A std current transformer WSK 40 Primary wound 5A secondary - class 1 WSK 30 primary wound /5A wound current transformer /5A wound current transformer /5A wound current transformer /5A wound current transformer WSK 40 primary wound /5A wound current transformer /5A wound current transformer Summation 5A secondary - class 1 KSU 2/3 summation /5A wound current transformer /5A wound current transformer SUSK 4 SUSK 4 summation /5A wound current transformer E-15 Above s do not include VAT. E&OE

17 Current transformers Made in Germany type ratio description class VA dimensions (mm) (H) (W) (D) ASK 41.4 Class 1 ASK A secondary Primary bar conductor: 40 x 10 / 30 x 10 mm Ø round conductor: 32 mm /1A std current transformer /1A std current transformer /1A std current transformer /1A std current transformer /1A std current trans former /1A std current transformer /1A std current transformer /1A std current transformer /1A std current transformer Metering ASK 61.4 ASK DIN rail adaptor for above ASK 51.4 Primary bar conductor: 50 x 10 / 40 x 20 mm Ø round conductor: 44 mm /1A std current transformer /1A std current transformer /1A std current transformer /1A std current transformer /1A std current transformer ASK 61.4 Primary bar conductor: 60 x 10 / 50 x 20 mm Ø round conductor: 44 mm /1A std current transformer /1A std current transformer /1A std current transformer /1A std current transformer /1A std current transformer ASK 81.4 Primary bar conductor: 80 x 10 / 60 x 30 mm Ø round conductor: 55 mm /1A std current transformer /1A std current transformer /1A std current transformer /1A std current transformer ASK plug-in Primary bar conductor: 100 x 30 / 80 x 50 mm Ø round conductor: 85 mm /1A std current transformer /1A std current transformer /1A std current transformer /1A std current transformer /1A std current transformer Above s do not include VAT. E&OE E-16

18 Current transformers Made in Germany The CTB range with "cage clamp " termination (uneffected by vibration and shock) offers a higher maximum operating voltage (Um < 1,2 kv) and increased isolation test voltage (6 kv Ueff, 1 min., 50 Hz) as well as increased ambient temperature range (-5 C < T < +50 C). cage clamp General specifications Nominal thermal current Icth: 1.2 x In (continuous) Therm. nominal short-time current Ith: 60 x In, 1 sec. Maximum operating voltage Um: 1.2 kv Isolation test voltage: 6 kv, Ueff, 50 Hz, 1 min. Nominal rated frequency: 50 Hz Isolation class: E UL-zertifiziert - Certificate Number E336996, DIN EN part 1+2 Ø round dimensions (mm) type ratio description class VA conductor (H) (W) (D) Current transformers with screwless connection technology CTB A secondary class 1 CTB Primary bar conductor: 30 x 10 / 25 x 12 / 20 X 20 mm /5A 25.7 mm std current transformer /5A 25.7 mm std current transformer /5A 25.7 mm std current transformer /5A 25.7 mm std current transformer /5A 25.7 mm std current transformer /5A 25.7 mm std current transformer /5A 25.7 mm std current transformer /5A 25.7 mm std current transformer CTB A secondary class 1 CTB Primary bar conductor: 40 x 10 / 30 x 15 mm /5A 31.8 mm std current transformer /5A 31.8 mm std current transformer /5A 31.8 mm std current transformer /5A 31.8 mm std current transformer /5A 31.8 mm std current transformer /5A 31.8 mm std current transformer CTB A secondary class 1 CTB Primary bar conductor: 50 x 10 / 40 x 30 mm /5A 43.7 mm std current transformer /5A 43.7 mm std current transformer /5A 43.7 mm std current transformer /5A 43.7 mm std current transformer CTB A secondary class 1 Primary bar conductor: 63 x 10 / 50 x 30 mm /5A 43.7 mm std current transformer /5A 43.7 mm std current transformer /5A 43.7 mm std current transformer /5A 43.7 mm std current transformer CTB CTB A secondary class 1 Primary bar conductor: 80 x 10 / 60 x 30 mm /5A 54.7 mm std current transformer /5A 54.7 mm std current transformer /5A 54.7 mm std current transformer /5A 54.7 mm std current transformer CTB A secondary class 1 Primary bar conductor: 100 x 10 / 80 x 30 mm /5A 70 mm std current transformer /5A 70 mm std current transformer /5A 70 mm std current transformer /5A 70 mm std current transformer CTB Accessories for above CTB DIN rail mounting adaptor for CTB quick fix quick action busbar fastening support clip all CTs E-17 Above s do not include VAT. E&OE

19 Splitcore current transformer Made in Germany The split measuring system facilitates a simple installation into existing panel boards without additional mounting requirements. Simply open the locking mechanism of the current transformer place around the primary conductor and lock ensuring that the circuit is closed. Once the secondary conductors are connected, the unit is ready for operation. General specifications Nominal frequency: Isolation class: Nominal thermal short-time current: Maximum operating voltage: Over-current limiting factor: 50Hz (others on request) E Ith = 60 x In Um 0.72 kv FS 5 up to 1500 A nominal current Metering MBS AG conform fully to: DIN VDE 0414/1 - DIN DIN EN 60044/1 - VBG 4 type ratio round conductor description class VA KBU 23 split core 5A secondary - class 1/3 KBU 23 Dimensions: Primary bar conductor: Round conductor: (H) 106 x (W) 93 x (D) 58 mm 20 x 30 mm max. Split core /5A split core split-core current transformer /5A split core split-core current transformer /5A split core split-core current transformer /5A split core split-core current transformer KBU 58 split core 5A secondary - class 1 Dimensions: Primary bar conductor: (H) 158 x (W) 125 x (D) 58 mm 50 x 80 mm max. KBU /5A split core split-core current transformer /5A split core split-core current transformer /5A split core split-core current transformer /5A split core split-core current transformer /5A split core split-core current transformer /5A split core split-core current transformer /5A split-core split-core curren t transformer KBU 812 split core 5A secondary - class 1 Dimensions: Primary bar conductor: (H) 198 x (W) 155 x (D) 58 mm 80 x 12 mm max /5A split core split-core current transformer /5A split core split-core current transformer KBU 816 split core 5A secondary - class 1 Dimensions: Primary bar conductor: (H) 243 x (W) 195 x (D) 79 mm 80 x 160 mm max. KBU /5A split core split-core current transformer /5A split core split-core current transformer /5A split core split-core current transformer /5A split core split-core current transformer /5A split core split-core current transformer /5A split core split-core current transformer Above s do not include VAT. E&OE E-18

20 Split-core JS series split-core 5A or 1A secondary from sensed primary current for metering applications. They can be used for power meters, distribution systems, control panels, switchgear and other equipment. Designed to install to live power lines without disconnection of the power source. Built-in over voltage protection provides a safe, fast and cost-effective installation. Light weight, compact dimensions Simple installation Built-in over-voltage protection Incorporated cable tie support for securing to cable Accuracy : class 0.5/1.0/3.0 Output terminals : 2 x M3 screw terminals with terminal cover Overload withstand : 720V (0.72 kv) Compliant with : IEC/EN & IEC Operating temperature : -24 C to 55 C Test voltage : 3kV for 1 minute type ratio round conductor description class VA Miniature split-core 5A secondary JS24S dimensions: (H) 74.5 x (W) 45 x (D) 33.7 mm JS24S-100/5A 100/5A Ø 24 mm mini split-core current transformer JS24S-150/5A 150/5A Ø 24 mm mini split-core current transformer JS24S-200/5A 200/5A Ø 24 mm mini split-core current transformer JS24S-250/5A 250/5A Ø 24 mm mini split-core current transformer JS24S-300/5A 300/5A Ø 24 mm mini split-core current transformer JS24S-400/5A 400/5A Ø 24 mm mini split-core current transformer JS17S JS36S dimensions: (H) 91.4 x (W) 57.1 x (D) 40.2 mm JS36S-400/5A 400/5A Ø 36 mm mini split-core current transformer JS36S-500/5A 500/5A Ø 36 mm mini split-core current transformer JS36S-600/5A 600/5A Ø 36 mm mini split-core current transformer Miniature split-core 1A secondary JS17S dimensions: (H) 64 x (W) 33 x (D) 35.8 mm JS17S-60/1A 60/1A Ø 17 mm mini split-core current transformer JS17S-75/1A 75/1A Ø 17 mm mini split-core current transformer JS24S dimensions: (H) 75 x (W) 45 x (D) 34 mm JS24S-100/1A 100/1A Ø 24 mm mini split-core current transformer JS24S-125/1A 125/1A Ø 24 mm mini split-core current transformer JS24S-150/1A 150/1A Ø 24 mm mini split-core current transformer JS24S-200/1A 200/1A Ø 24 mm mini split-core current transformer JS24S-250/1A 250/1A Ø 24 mm mini split-core current transformer JS24S-300/1A 300/1A Ø 24 mm mini split-core current transformer JS24S JS36S dimensions: (H) 91 x (W) 57 x (D) 40.2 mm JS36S-400/1A 400/1A Ø 36 mm mini split-core current transformer JS36S-500/1A 500/1A Ø 36 mm mini split-core current transformer JS36S-600/1A 600/1A Ø 36 mm mini split-core current transformer RMS series - output current transducers (4-20mA) RMS Series Split-core Current Transducers are designed for energy management with a convenient connection to electronic submeters, current measurement in distributed power line carriers (PLCs) or remote controls such as SCADA software for automation and supervision. Max. permissable current : 120% (continuous), 150% (1 min.) Output : 4-20mA (average)/0-rated current (load resistance: 600Ω at P/S : 24V) Accuracy / linearity : ±2% FS. Dynamic range 1:100 at 50/60Hz sinewave Output terminals : 2 x M3 screw terminals with terminal cover Sensor supply voltage : 24 VDC loop power Operating condition : -20 C to 50 C 85% RH (any direction installable) JC16F dimensions: (H) 55 x (W) 29.5 x (D) 31 mm JC16F-5-RMS 0-5A Ø 16 mm 4-20mA split-core current transducer JC16F-10-RMS 10A Ø 16 mm 4-20mA split-core current transducer JC16F-25-RMS 25A Ø 16 mm 4-20mA split-core current transducer JC16F-50-RMS 50A Ø 16 mm 4-20mA split-core current transducer JC16F-100-RMS 100A Ø 16 mm 4-20mA split-core current transducer JS36S JC24S dimensions: (H) 75 x (W) 45 x (D) 34 mm JC24S-250-RMS 250A Ø 24 mm 4-20mA split-core current transducer JC36S dimensions: (H) 91 x (W) 57 x (D) 40.2 mm JC36S-500-RMS 500A Ø 36 mm 4-20mA split-core current transducer E-19 Above s do not include VAT. E&OE

21 Current transformers / DC shunts IMN1... IRB1... IRB3... type ratio description class VA IMN1 ring type transformers Ø round conductor: 32 mm dimensions (mm) (H) (W) (D) IMN1/05 50/5A ring current transformer IMN1/06 60/5A ring current transformer IMN1/07 75/5A ring current transformer IMN1/10 100/5A ring current transformer IMN1/12 125/5A ring current transformer IMN1/15 150/5A ring current transformer IMN1/16 160/5A ring current transformer IMN1/20 200/5A ring current transformer IMN1/25 250/5A ring current transformer IMN2 Primary bar conductor: 40 x 12.5 mm Ø round conductor: 38 mm IMN2/16 160/5A ring current transformer IMN2/20 200/5A ring current transformer IMN2/25 250/5A ring current transformer IMN2/30 300/5A ring current transformer IMN2/40 400/5A ring current transformer IMN2/50 500/5A ring current transformer IMN2/60 600/5A ring current transformer IBR1 Primary bar conductor: 60 x 20 mm Ø round conductor: 60 mm IBR1/06 600/5A ring current transformer IBR1/08 800/5A ring current transformer IBR1/ /5A ring current transformer IBR1/ /5A ring current transformer IBR3 Primary bar conductor: 100 x 30 mm Ø round conductor: 110 mm IBR3/ /5A ring current transformer IBR3/ /5A ring current transformer IBR3/ /5A ring current transformer IBR3/ /5A ring current transformer IBR3/ /5A ring current transformer IBNP primary wound IBNP/05 5/5A primary wound CT IBNP/10 10/5A primary wound CT IBNP/15 15/5A primary wound CT IBNP/20 20/5A primary wound CT IBNP/25 25/5A primary wound CT IBNP/30 30/5A primary wound CT IBNP/40 40/5A primary wound CT Metering ACN10-5 ACN30-5 B C D E A ACN60-5 Above s do not include VAT. E&OE DC shunts 50mV output Accuracy: 0.5% Overload: 120% continuously, 1000% for 5 seconds dimensions (mm) A B C D E ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV ACN A 50mV Intermediate and larger sizes up to A available on request E-20

22 Analog panel instruments type range description 48mm² 72mm² 96mm Ammeters (AC) moving iron (overscale 2 x In) (90º movement) BEA01A 1A direct reading AC ammeter BEA05A 5A direct reading AC ammeter BEA10A 10A direct reading AC ammeter BEA15A 15A direct reading AC ammeter BEA25A 25A direct reading AC ammeter BEA40A 40A direct reading AC ammeter BEA40A BEA01AT 1A CT operated AC ammeter BEA05AT 5A CT operated AC ammeter Voltmeters (AC) moving iron (90 movement) BEV25A 250V direct reading AC voltmeter BEV40A 400V direct reading AC voltmeter BEV50A 500V direct reading AC voltmeter BEV60A 600V direct reading AC voltmeter BEV40A BEF50AP Frequency meters (90º movement) BEF50AP 45-55Hz frequency (pointer type) V BEF50AR 47-53Hz frequency (vibrating reed) V BEF50AR Hz frequency (vibrating reed) V Maximum demand ammeters (90 movement) delay time: 15 min (standard) ERB01A /1A maximum demand ammeters ERB05A /5A maximum demand ammeters Combination maximum demand ammeters ERBC01A /1A com. Max. demand ammeters ERBC05A /5A com. Max. demand ammeters Power factor indicator (90 movement) V BEP05A /5A power factor indicator ( ) BEF50AR Ammeters (DC) moving coil (90 movement) BEA05D 5A direct reading DC ammeter BEA10D 10A direct reading DC ammeter BEA15D 15A direct reading DC ammeter BEA20D 20A direct reading DC ammeter BEA25D 25A direct reading DC ammeter BEA30D 30A direct reading DC ammeter BEV50MVD 50mV shunt operated ammeter BEA01MAD 1mA DC (low current) ammeter BEA20MAD 4-20mA DC (low current) ammeter For DC shunts please refer to page E-20 BEMC01A Voltmeter (DC) (90 movement) BEV03D 0-30V DC voltmeter BEV15D 1-150V DC voltmeter BEV60D V DC voltmeter BEHCD BEHCA4 Extra charges and accessories Running hour meters 144 mm² housing (90 movement) add to 96 mm² coloured bezels R / W / B for instruments IP65 housing front protection spare glass BEHCA AC running hour meter 24/110/230/380 VAC BEHCD DC running hour meter VDC = 48 x 48 mm / 7 = 72 x 72 mm / 9 = 96 x 96 mm E-21 Above s do not include VAT. E&OE

23 Portable network analyser / Supervision and energy management M85050 Canvas carrying bag A portable high-performance recorder designed for energy audits. The compact design and ease of operation is ideal for analysis of networks with power quality supply. Most portable recorders follow highly complex parameter configuration and start-up processes the CIRe+ has been designed to simplifying the setup and execution of measurements and, as a consequence, the analysis of energy and audit studies. Measures main and three-phase electrical networks in 2 quadrants Measure (TRMS) true root mean square Energy meter (4 quadrants) 4 voltage and 3 current circuits Configurable via a PC application - Compatible with PowerVision software EN Recording of parameters and quality events on SD card (up to 2 GB) Compact size, allowing the unit to be installed in standard double insulation boxes Light and easy to transport Self-detection of current clamps Magnetic attachment to facilitate fastening to an electric panel or metal supports 128 samples per gate (used to calculate data over selected recording period) Metering CIRe+ 3 phase economy portable network analyser type description Voltage : VAC, VAC Operating temperature: 10ºC - 65ºC Standard: IEC , IEC , IEC , UL94, VDE 110 Accuracy : Voltage : 0.5% M85050 Analyzer supplied complete with: CP E-Flex 20/54 cm 200/2000/20000 Amp Voltage leads SD memory card and USB/SD card reader (1GB) PC software Canvas carrying bag is a remote control and supervision software for LOVATO Electric devices equipped with communication capabilities via serial ports, Ethernet or modem in a simple and reliable way. The supported protocols are Modbus-RTU, Modbus-ASCII and Modbus-TCP. Its structure and applications are based on MS SQL Express that uses a MS IIS Express web server to control the user interface. The software is capable of: Managing multiple communication channels simultaneously Connecting the devices to the various channels Collecting data from all the devices and storing them in a database Displaying collected data in graphical pages and tables Allowing access to the devices and their data according to the rights of the different users type description SYN1SET supervision and energy management software (parameterising, measurement, monitoring, control, web server, and FTP file transfer) + enablement of monitoring on 1 LOVATO Electric device. SYN1S005 enable licence of supervision function for 5 additional devices SYN1S020 enable licence of supervision function for 20 additional devices SYN1S050 enable licence of supervision function for 50 additional devices Above s do not include VAT. E&OE SYN1S100 enable licence of supervision function for 100 additional devices Note: For the number of licences, only devices equipped with communication ports can be considered. E-22

24 Power analyser DIRIS Q800 is a high-end power quality analyser, able to monitor and record the major power quality parameters. Operating as an event/fault recorder, capable to store a high number of voltage events and disturbances, frequency variations, inrush current, etc. Additional PQ data can be recorded, such as Flicker, Unbalance, Harmonics and Inter harmonics, Mains Signalling. It also provides standard power measurement data for three-phase systems. Extra voltage and current measurement channels give the possibility to monitor Neutral Potential and Earth Leakage current. Main benefits: Embedded Web Server Large colour touch screen with user-friendly instrument web interface Fast simultaneous sampling on 9 channels at 1024 samples / cycle Voltage event recording (sags,swells,interruptions) with storage of 1/2 cycle RMS values and waveforms Frequency variation monitoring and recording with of 1/2 cycle RMS values and waveforms Overcurrent recording on three-phase channels with storage of 1/2 cycle RMS values and waveforms Continuous monitoring of the power quality and Class A certified measurements for voltage characteristics Simultaneous recording of events, Min/Avg/Max LOG and energy counters Analyser software is provided to perform analysis on recorded data according to EN50160 PQ standard Export standard file formats (PQDIF and CSV) to allow quick view and analysis on all stored data Specifications: Power supply: Backup Battery: Recording Memory: VAC, 50/60 Hz / VDC Li-Ion,2500 mah (>15 min autonomy) 4 GB (16 GB Optional) new DIRIS Q800 Measurement inputs: - Direct voltage measurement input: P-N: max 580 V RMS CAT III, L-L: max 1000 V RMS CAT III - U4 Direct voltage measurement input: Max 580 V RMS CAT III Accuracy: - Three-phase voltage: ±0.1% Un over % Un range - U4 voltage: ±0.2% measurement - Currents: ±0.2% measurement (device) - Powers: ±0.2% measurement - Frequency: ±8 mhz - Harmonics: Class 1 (IEC/EN ) - Realtime clock (RTC): <1s in 24h without synchronisation; <5ms with GPS synchronisation - Active energy: Class 0.5S, compliant to IEC/EN Reactive energy: Class 1, compliant to IEC/EN Communication: - Ethernet ports: 2 x Auto MDIX RJ45 10/100 Base Ethernet - RS485 port (slave): 1 x Optoisolated, 0.5UL, bps - WIFI antenna: 1 x Passive antenna, SMA connector on rear panel - GPS antenna: Active patch antenna, remote powered, SMA connector - Protocols: HTTP, HTTPS, FTP, SFTP, NTP, NMEA, Modbus TCP, Modbus RTU - USB port: 1 x USB 2.0 A type socket, high speed 480 Mbit/s Standard: - Product compliance: IEC/EN , IEC/EN Certification: Class A, IEC/EN :2015 Ed.3 for voltage type operating temperature DI DO AI memory description DIRIS Q800 multifunction network quality analyser C GB (16 GB optional) network quality analyser E-23 Above s do not include VAT. E&OE

25 Notes

26