AFLEX MAGNITUDE 40W PROGRAMMABLE LED DRIVER QUICK SPECS FEATURES WIRING DIAGRAM ENCLOSURE DETAILS

Size: px

Start display at page:

Download "AFLEX MAGNITUDE 40W PROGRAMMABLE LED DRIVER QUICK SPECS FEATURES WIRING DIAGRAM ENCLOSURE DETAILS"

Jesse Edwards
6 years ago
Views:

MAGNITUDE L I G H T I N G DIM DOWN TO 0.

Programming the Driver doesn t require any power and can be done in less then one second.

1 MAGNITUDE L I G H T I N G DIM DOWN TO 0.1% DIMMABLE AFLEX E W PROGRAMMABLE LED DRIVER CLASS P CLASS 2 E The AFlex Series of Constant Current Programmable LED Drivers offers high efficiency, smooth flicker-free dimming and Dim to off capability. Magnitude s wireless programing technology (FlexTool) enables full flexibility for OEMs to easily con figure the drivers output current, dimming curve, dim-to-off, NTC settings and more. Programming the Driver doesn t require any power and can be done in less then one second. The auxiliary output provides power source for sensors and/or cooling devices and eliminates the need for an additional power supply. The Drivers wide operating window, dimming performance and programming options gives luminaire manufacturers high level of flexibility. As always, 5-year warranty is a standard on all of Magnitude lighting products. QUICK SPECS Input Voltage Max Power VAC / VDC +/-10% 40W Voltage 3-57VDC Current Max Load Max. Load > 89% < 20% mA WIRING DIAGRAM Input Black Green VAC 50\60Hz > 0.95 IP21 Weight 166gr / 5.85oz Compliant with Title 24 Requirements* Wireless RFID Programming - No power required N Envir. Protection Rating FEATURES RFID White Power Max. Load 12V AUX NTC DIM 0-10V LED 0-10V Dimmable - Dim Down to 1mA Gray Yellow Dim To Off Capability Orange NTC - LED Temperature Sensor Orange Auxiliary Power Purple Gray Wide Operating Window Red CLO (constant lumen output) Blue Up to 90% Efficiency Universal Input Voltage ENCLOSURE DETAILS UL Listed 8750, Class 2, Class P In. (mm) 4.19 (106.4) Mounting Length 4.94 (125.7) Width 2.59 (65.8) Height 1.00 (25.4) WI MO DT H HEIGHT Length UN LE NG TH TIN GL EN GT H * Most models are compliant with Title 24 flicker, standby power, and start-up time requirements. Please contact Magnitude Lighting for more details. page 1

2 GENERAL Part Number: AFLEX-xxW- - - Driver Type: Constant Current Programming Tool: FlexTool Software: link SPECIFICATIONS *Specifications are at 25 c (unless specified otherwise) Input Input Voltage Range Input Frequency Input current Inrush Current Efficiency Power Factor VAC / VDC ± 10% 50 / 60Hz 0.39A@120VAC / 0.18A@277VAC 38A Max (refer to graph, page 10) > 89% (refer to graph, page 6) 0.992@120VAC / 0.927@277VAC (refer to graph, page 7) Voltage Range Current Range Current Tolerance Current Ripple Line Regulation Load Regulation Turn On Delay Time Sensor Power Supply (Auxiliary) Stand-By Power 3-57VDC mA (1mA step programmable) ± 5% ± max load ± 0.5% ± 0.5% 0.4 max load 12V up to 80mA > 1W Environmental Sepcification Env. Protection Rating Surge Protection Operating Ambient temperature Max Case Temp. (Tcase) Storage temperature Expected life time EMI Compliance Audible Noise Withstanding Voltage IP 21 - indoor use only 2.5 KV -40ºc - +60ºc 85ºc -40ºc - +85ºc 100K hours at 70ºc (refer to graph, page 10) FCC 47CFR Part 15 Class B < 24db Class A 2.5 KV page 2

3 Dimming Dimming Control Dimming input Range Dimming Curves Min. Dimming level Dim to Off Current Consumption PWM Dimming 0-10V -2V - +15V Linear / Logarithmic (Programmable) Dim down to 0.1% Yes (Programmable) 0.35mA / Source 2000Hz LED Thermal Protection (NTC) - refer to page 8 NTC Value Manufaturer: Vishay 15 kω ± Manufacturer P/N: NTCS0805E3153JMT Level range 1mA step programmable (0-100%) Protections Specifications Over Current Protection Short Circuit Protection Over Voltage Protection Over Temperature Protection Mis-Wiring Protection Yes; current limit Yes; hiccup mode Yes; hiccup mode Yes; power derating (refer to graph, page 9) Yes; auto shutdown Mechanical & Housing Specifications Length Mounting Length Width Height Housing material Housing Color Junction Box Input Connectors type Connectors type Dimming Connectors type Auxiliary Connectors type NTC Connectors type Mounting 4.19 Inch (106.4mm) 4.94 Inch (125.7mm) 2.59" Inch (65.8mm) 1.00" Inch (25.4mm) Aluminium Blue anodized No black & white/ Wago 253, dual side / 16-20AWG strip 3/8 red & blue / Wago 253, dual side / 16-20AWG strip 3/8 purple & gray / Wago 253, dual side / 16-20AWG strip 3/8 yellow & gray / Wago 253, dual side / 16-20AWG strip 3/8 orange & orange / Wago 253, dual side / 16-20AWG strip 3/8 Two hole flange mounting Approval markings Certificates/Approval signs UL 8750 class 2, class P page 3

4 MECHANICAL DIAGRAM Dual Feed Side Feed page 4

5 AFLEX 40W PROGRAMMABLE LED DRIVER FLICKER PERFORMANCE The IEEE P1789 flicker test results are presented graphically with no observable effect (green area), low-risk (yellow area), and high risk (red area) Modulation [%] 1 1mA 100mA 350mA 500mA 700mA 1050mA 1400mA Frequency [Hz] page 5

6 AFLEX 40W PROGRAMMABLE LED DRIVER 60 OPERATING RANGE 50 OUTPUT VOLTAGE [V] OUTPUT CURRENT [ma] DIMMING CURVES LINEAR LOGARITHMIC MAXIMUM DIMMING LEVEL LIGHT OUTPUT LEVEL 1.5V MINIMUM DIMMING LEVEL SWITCH OFF SWITCH ON V page 6

7 EFFICIENCY VS. OUTPUT VOLTAGE (120VAC) EFFICIENCY [%] OUTPUT VOLTAGE [V] 100mA 350mA 500mA 700mA 1100mA 1400mA EFFICIENCY [%] EFFICIENCY VS. OUTPUT VOLTAGE (277VAC) OUTPUT VOLTAGE [V] 100mA 350mA 500mA 700mA 1100mA 1400mA page 7

8 POWER FACTOR VS. OUTPUT POWER POWER FACTOR VAC 277VAC OUTPUT POWER [W] THD VS. OUTPUT POWER THD [%] VAC 277VAC OUTPUT POWER [W] page 8

9 LED THERMAL PROTECTION (NTC) RFID The AFlex Series of drivers helps protect the LED's lifetime and will reduce the temperature of the LED module by derating the output current in case of high temperatures. The negative temperature coefficient (NTC) thermistor must be connected to the LED driver as shown in the wiring diagram. For maximum performance, the NTC thermistor must be placed close to the Tc point of the LED module. The power derating parameters can be programed using the FlexTool programmer. The NTC outputs can be left disconnected if thermal protection is not required. Input White Black Green N VAC 50\60Hz 12V AUX NTC DIM 0-10V LED Gray Yellow Orange Orange Purple Gray Red Blue NTC THERMISTOR Compatible NTC thermistor: Specification Manufacturer Manufacturer P/N 15 kω ± Vishay NTCS0805E3153JMT 120 Iout (%) VS. LED TEMPERATURE 100 Iout [%] LED TEMPERATURE [ºc] page 9

10 DRIVER THERMAL PROTECTION 120 Iout (%) VS. Tcase Iout [%] Tcase [ºc] Normal operation Derating area Protection area Return to work after thermal protection activated Min -40ºc +75ºc +80ºc +70ºc Max +75ºc +85 ºc page 10

11 AFLEX 40W PROGRAMMABLE LED DRIVER LIFETIME VS. Tcase LIFETIME (KHrs) Tcase [ºc] INRUSH CURRENT Vin [V] Ipeak [A] T Ipeak ) 120 VAC usec 277VAC usec Ipeak T Ipeak ) page 11

12 1.600 OUTPUT CURRENT VS. LED VOLTAGE OUTPUT CURRENT [A] L1=1ft. L2=100ft L3=300ft. L4=500ft. L5=1000ft LED VOLTAGE [V] TEST CONDITION: 1. Power = 40W 2. Current = 1.4A 3. Wire parameters = 18AWG, 16/ 30, 6.75Ω/ 1000 Note Above L=100ft. min LED voltage = 10V page 12

13 AFLEX - ORDER PART NUMBER CONFIGURATION FOR EXAMPLE: 3. Case Style AFLEX- W Max Power (W) 2. Current 4. Dimming Curve 5. Auxilary Power 1. Max Power: 30 / 40 / 50 / 60W 2. Current: mA 3. Case Style: D - Double Feed (Back and Sides) / S - Single Feed (Sides) 4. Dimming Curve: L - For Linear / G - For Logarithmic 5. Auxilary Power: A - For Aux / Empty - Non Aux Please Note! for special requirements, please contact our sales team at: sales@magnitudeinc.com page 13

14 COMPATIBLE 0-10 DIMMER LIST Dimming Lutron Lutron Lutron Leviton Watt Stopper Lightolier Controls Phillips Part Number Diva - DVTV Diva - NFTV Nova T - NTFTV illumatech - IP7 DCLV1 ZP600FAM120 Sunrise - SR1200ZTUNV page 14

FLEXTOOL PROGRAMMING THE AFLEX DRIVER The FlexTool is a wireless programer used to program Magnitude s Flex Series of LED Drivers.

With the FlexTool software you can easily save driver configuration profiles to an external file and use as needed.

PROGRAMMABLE OUTPUT CURRENT 1mA step programmable.

Dimming level before Dim to Off Dimming type: 0-10V / Non. Factory Default: 0-10V LED THERMAL PROTECTION Temperature Derating start.

15 FLEXTOOL PROGRAMMING THE AFLEX DRIVER The FlexTool is a wireless programer used to program Magnitude s Flex Series of LED Drivers. By using the FlexTool, OEM s can quickly and smoothly configure the drivers parameters without applying power or wires to the driver. With the FlexTool software you can easily save driver configuration profiles to an external file and use as needed. The software provides graphic and audio indication that the driver was successfully configured. PROGRAMMABLE OUTPUT CURRENT 1mA step programmable. DIMMING CONTROL Dim to Off: yes/no (check box) Factory Default: yes Dimming Curve: Linear or Log. Factory Default: Linear Min. Dimming level before Dim to Off Dimming type: 0-10V / Non. Factory Default: 0-10V LED THERMAL PROTECTION Temperature Derating start. Factory Default: 70 C Temperature Derating end. Factory Default: 100 C Minimum Current Level Before Shutoff: 1mA page 15 MAGNITUDE LIGHTING The specifications are subject to change without notice Bentley Circle, Tustin, CA Customer Service: (714) Fax: (714) WE DRIVE LIGHT

OPTOTRONIC LED Driver

www.osram.us/optotronic OPTOTRONIC LED Driver OTi55W Gen2 Programmable Technical Specifications General Information Electrical Specifications Item Number(s) Type Output Power Programming Tool Programmable