Qseven Gen 2.0 Carrier User Manual

Transcription

1 Qseven Gen 2.0 Carrier User Manual Connect Tech Inc. 42 Arrow Road Guelph, Ontario N1K 1S6 Tel: Toll: (North America only) Fax: Web: CTIM Revision: 0.02, July 10, 2014

2 Table of Contents Customer Support Overview... 4 Contact Information... 4 Limited Lifetime Warranty... 5 Copyright Notice... 5 Trademark Acknowledgment... 5 Revision History... 5 Introduction... 7 What is Qseven?... 7 What is Qseven Gen 2.0?... 7 ESD Warning... 7 Product Features and Specifications... 8 Block Diagram... 9 Connector Locations...10 Top View Jumper and Connector Summary...11 Detailed Feature Pinouts and Descriptions...11 Embedded DisplayPort Connector DisplayPort Connector /100/1000 Ethernet (GBE) Software Support for the Intel RS-232 Serial SATA Power minipcie/msata Slots Dual Function minipcie/msata Slots...15 minipcie/msata Dual Functionality Diagram SATA/mSATA Switching...15 SATA/mSATA Switching Functionality Diagram Jumper Selection...16 Half and Full Length minipcie/msata module Installation...16 SIM Socket Qseven Gen 2.0 Connector System Qseven Fan USB 20 CAN Bus AUDIO microsd CARD Typical Hardware Installation...22 Current Consumption Details Revision 0.02

3 Mechanical Details...24 Top View Bottom View Cables & Interconnect...26 CBG079 - SATA HDD Cable CBG127 - DB-9 to Minitek Cable CBG113 - DisplayPort to 20-Pin Minitek Cable CBG117 - RJ-45 to 10-Pin Minitek Cable CBG118 - Dual Audio to 8-Pin Minitek Cable CBG134 - QCG Pin Minitek System Cable CBG131 - Dual USB 3.0 to 20-Pin Cable Revision

4 Customer Support Overview If you experience difficulties after reading the manual and/or using the product, contact the Connect Tech reseller from which you purchased the product. In most cases the reseller can help you with product installation and difficulties. In the event that the reseller is unable to resolve your problem, our highly qualified support staff can assist you. Our support section is available 24 hours a day, 7 days a week on our website at: See the contact information section below for more information on how to contact us directly. Our technical support is always free. Contact Information Mail/Courier Connect Tech Inc. Technical Support 42 Arrow Road Guelph, Ontario Canada N1K 1S6 /Internet sales@connecttech.com support@connecttech.com Note: Please go to the Download Zone or the Knowledge Database in the Support Center on the Connect Tech website for product manuals, installation guides, and technical tips. Submit your technical support questions to our customer support engineers via the Support Center on the Connect Tech website. Telephone/Facsimile Technical Support representatives are ready to answer your call Monday through Friday, from 8:30 a.m. to 5:00 p.m. Eastern Standard Time. Our numbers for calls are: Toll Free: (North America only) Telephone: (Live assistance available 8:30 a.m. to 5:00 p.m. EST, Monday to Friday) Facsimile: (on-line 24 hours) 4 Revision 0.02

5 Limited Lifetime Warranty Connect Tech Inc. provides a Lifetime Warranty for all Connect Tech Inc. products. Should this product, in Connect Tech Inc.'s opinion, fail to be in good working order during the warranty period, Connect Tech Inc. will, at its option, repair or replace this product at no charge, provided that the product has not been subjected to abuse, misuse, accident, disaster or non-connect Tech Inc. authorized modification or repair. You may obtain warranty service by delivering this product to an authorized Connect Tech Inc. business partner or to Connect Tech Inc. along with proof of purchase. Product returned to Connect Tech Inc. must be pre-authorized by Connect Tech Inc. with an RMA (Return Material Authorization) number marked on the outside of the package and sent prepaid, insured and packaged for safe shipment. Connect Tech Inc. will return this product by prepaid ground shipment service. The Connect Tech Inc. Lifetime Warranty is defined as the serviceable life of the product. This is defined as the period during which all components are available. Should the product prove to be irreparable, Connect Tech Inc. reserves the right to substitute an equivalent product if available or to retract Lifetime Warranty if no replacement is available. The above warranty is the only warranty authorized by Connect Tech Inc. Under no circumstances will Connect Tech Inc. be liable in any way for any damages, including any lost profits, lost savings or other incidental or consequential damages arising out of the use of, or inability to use, such product. Copyright Notice The information contained in this document is subject to change without notice. Connect Tech Inc. shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Connect Tech, Inc. Copyright 2014 by Connect Tech, Inc. Trademark Acknowledgment Connect Tech, Inc. acknowledges all trademarks, registered trademarks and/or copyrights referred to in this document as the property of their respective owners. Not listing all possible trademarks or copyright acknowledgments does not constitute a lack of acknowledgment to the rightful owners of the trademarks and copyrights mentioned in this document. Revision History Revision Date Changes /02/2014 Original Document /03/2014 Added PCB REV A Image for PCB and Connectors /06/2014 Modifying Carrier Information, Added Power Consumption Information, Correcting Display Outputs Revision

6 6 Revision 0.02

7 Introduction Connect Tech s Qseven Gen 2.0 Carrier is a compact ruggedized carrier that integrates with any industry standard Qseven Gen 2.0 module. With dual Gigabit Ethernet, USB 3.0, and DisplayPort; the Qseven Gen 2.0 Carrier is a compact modern carrier. With the addition of msata/sata switching that utilizes the Qseven Gen 2.0 Modules SATA connections, a maximum configuration of 2 msata SSD or 2 Mini-PCIe with 2 SATA HDD or 1 msata SSD, 1Mini-PCIe, and 1 SATA HDD is possible. Combined with the new Gen 2.0 features, the Qseven Gen 2.0 Carrier performs exceptionally with low power consumption. What is Qseven? Qseven is an off-the-shelf, multi-vendor, computer-on-module that integrates the core components of a common PC. The Qseven standard allows upgrading to the latest processor and memory technology with ease, while maintaining the I/O interfaces. To learn more about Connect Tech s Qseven carrier, visit What is Qseven Gen 2.0? Qseven Gen 2.0 is the latest generation of Qseven modules. Expanding upon the original feature set of the Qseven with the addition of a new µqseven module size, as well as industry standards like USB 3.0 and DisplayPort. Qseven Gen 2.0 updates the previous architecture of the Qseven module. To learn more about Connect Tech s Qseven carrier, visit ESD Warning Electronic components and circuits are sensitive to Electro Static Discharge (ESD). When handling any circuit board assemblies including Connect Tech Qseven Gen 2.0 Carrier, it is recommended that ESD safety precautions be observed. ESD safe best practices include, but are not limited to: Leaving circuit boards in their antistatic packaging until they are ready to be installed. Using a grounded wrist strap when handling circuit boards, at a minimum you should touch a grounded metal object to dissipate any static charge that may be present on you. Only handling circuit boards in ESD safe areas, which may include ESD floor and table mats, wrist strap stations and ESD safe lab coats. Avoiding handling circuit boards in carpeted areas. Try to handle the board by the edges, avoiding contact with components. Revision

8 Product Features and Specifications Feature PCB Size / Overall Size QCG mm x mm (NanoITX Compliant) Mini-PCIe/mSATA with SATA Switching 3D STEP Model: download here 2x (Use of msata removes standard SATA, See minipcie/msata Slots) SATA Up to 2x SATA SIM Card 2x SIM Cards Display 1x DisplayPort 1x Embedded DisplayPort Serial 1x RS-232 CAN 1x Isolated CAN USB 2x USB 3.0 2x USB 2.0 (Integrated into USB 3.0) SD Card 1x microsd Card Ethernet 2x Gigabit Ethernet Audio HD Audio: 1x Input, 1x Output Power Connector 1x Screw Terminal (Default Configuration) 1x Molex HDD (Optional Configuration) Accessories Cable Kit (DisplayPort, DP++ Passive Adapter) Operating Temperature Industrial Temp: -40 to +85 Celsius Power Input +5V ± 5% Embedded Power 4A (Provided from on-board supply, sourced from +5V rail) 0.5A (Provided from on-board supply, sourced from +3.3V rail) Warranty and Support Lifetime warranty and free support 8 Revision 0.02

9 Block Diagram 9

10 Connector Locations Top View

11 Jumper and Connector Summary Designator Connector Description P1A edp Embedded DisplayPort P1B DP++ DisplayPort P2A GBE 1 Gigabit Ethernet 1 P2B GBE 2 Gigabit Ethernet 2 P3 SERIAL RS-232 Serial P4A SATA 0 SATA Port 0 P4B SATA 1 SATA Port 1 P5 PWR Screw Terminal Power Connector (Default Configuration) P6A minipcie/msata 0 minipcie/msata Port 0 P6B minipcie/msata 1 minipcie/msata Port 1 P7A SIM 0 SIM Card Holder 0 P7B SIM 1 SIM Card Holder 1 P8 QSEVEN Qseven Gen 2.0 Module Connector P9 SYSTEM System Header P10 FAN Qseven Gen 2.0 Module Fan Connector P11 USB USB 3.0 and USB 2.0 Connector P12 CAN CAN Bus Connector P13 AUDIO HD Audio Connector P14 SD CARD microsd Card Connector P15 PWR Molex HDD Power Connector (Optional Configuration) J1A J1B J2 J3 J4 msata/sata Jumper 0 msata/sata Jumper 1 FAN PWR Jumper FAN PWM Jumper CAN Jumper Jumper 0 for selecting msata 0 or SATA 0 Connection to Qseven Module Jumper 1 for selecting msata 1 or SATA 1 Connection to Qseven Module Detailed Feature Pinouts and Descriptions In Qseven systems, the processor and chipset are implemented on the Qseven CPU module. This connects to the Qseven carrier via a MXM connector. Many of the existing Qseven Gen 1.0 modules use the Intel Atom mobile architecture, Z series processor SCH US15W chipset. The Qseven Gen 2.0 modules are focused on the Intel Atom E3800 architecture (Previously called Bay Trail). For a list of Qseven module vendors, visit Revision

12 Embedded DisplayPort Connector Function Location Embedded DisplayPort Connector P1A Type FCI Minitek Double Row 10 x 2 P/N Cable G06-20LF CBG113 Pinout Pin Description Pin Description 1 DP0+ 2 DP3+ 3 DP0-4 DP3-5 GND 6 GND 7 DP1+ 8 DPAUX- 9 DP1-10 DPAUX+ 11 GND 12 GND 13 DP2+ 14 DP Hot Plug Detect 15 DP2-16 GND 17 GND 18 GND 19 DP Power 20 N/A DisplayPort Connector Function Location DisplayPort Connector P1B Type FCI Minitek Double Row 10 x 2 P/N Cable G06-20LF CBG113 Pinout Pin Description Pin Description 1 DP0+ 2 DP3+ 3 DP0-4 DP3-5 GND 6 GND 7 DP1+ 8 DPAUX- 9 DP1-10 DPAUX+ 11 GND 12 GND 13 DP2+ 14 DP Hot Plug Detect 15 DP2-16 GND 17 GND 18 GND 19 DP Power 20 N/A 12 Revision 0.02

13 10/100/1000 Ethernet (GBE) Function Location Gigabit Ethernet Connector P2A, P2B Type FCI Minitek Double Row 5 x 2 P/N Cable G06-10LF CBG117 Pinout Pin Description Pin Description 1 MX0-2 MX0+ 3 MX1-4 MX1+ 5 SHELL 6 SHELL 7 MX2-8 MX2+ 9 MX3-10 MX3+ Software Support for the Intel Additional drivers will be needed to properly operate the GBE Port 1 on the carrier. These drivers can be downloaded directly from Intel website from the below link: ductline=ethernet+controllers&productproduct=intel%c2%ae gigabit+ethernet+controller RS-232 Serial Function Location RS-232 Serial P3 Type FCI Minitek Double Row 5 x 2 P/N Cable G52-10LF CBG127 Pinout Pin Description Pin Description 1-2 RX 3 TX 4-5 GND 6-7 RTS 8 CTS Revision

14 SATA The Qseven Gen 2.0 Carrier provides two SATA plugs that are SATA/mSATA switched. Please see minipcie/msata Slots description for additional details. Function Location Type SATA P4A, P4B Molex Vertical Serial ATA Plug P/N Cable CBG079 Pinout Pin Description 1 GND 2 TX+ 3 TX- 4 GND 5 RX- 6 RX+ 7 GND Power The required power rails for the Qseven Gen 2.0 carrier are available from the 4 pin Screw Terminal (Default Configuration) or the 4 pin Molex HDD (Optional Configuration). Function Location Type P/N Power P5 or P15 (Combined Component Footprint) P5 - FCI Terminal Block P15 - Molex HDD P C041A01LF P Pinout Pin Description 1-2 GND 3 GND 4 +5V 14 Revision 0.02

15 minipcie/msata Slots Dual Function minipcie/msata Slots The Qseven Gen 2.0 carrier has two special dual purpose functional minipcie/msata. Each of these slots can accept either a minipcie module or a msata SSD module. These slots have special circuitry that allows for the selection between connecting PCIe lanes or SATA lanes. Each of these slots are also provided with a USB 2.0 in addition to the PCIe as per the mini PCIe specification, see below for a block diagram of the slots functionality. minipcie/msata Dual Functionality Diagram SATA/mSATA Switching In addition to having dual functionality minipcie/msata slots, the Qseven Gen 2.0 carrier has circuitry to allow for the unused SATA lines to be routed out to a standard SATA plug. See the block diagram for the SATA/mSATA switching functionality. SATA/mSATA Switching Functionality Diagram Revision

16 If a minipcie Card is placed into the minipcie/msata 0 slot, then the msata/sata Jumper 0 (J1A) will select the SATA to be routed to the SATA 0 plug, causing the SATA lanes routed to the minipcie/msata 0 slot to be disconnected. If however a msata Card is placed into the minipcie/msata 0 slot, then the msata/sata Jumper 0 (J1A) will select the SATA to be routed to the minipcie/msata 0 slot, causing the SATA lanes routed to the SATA 0 plug to be disconnected. This allows for the following maximum configurations: A. 2x minipcie Cards, with 2x SATA plug connections B. 1x minipcie Card, with 1x msata Card, and 1x SATA plug connection C. 2x msata Cards Jumper Selection Jumper Location Jumper ON Jumper OFF J1A Slot 0 minipcie, Slot 0 msata External SATA Plug 0 J1B Slot 1 minipcie, External SATA Plug 0 Slot 1 msata Half and Full Length minipcie/msata module Installation The Qseven Gen 2.0 carrier comes with mounting holes to allow for the population of a half and a full length module. One of the two slots will need to use a half-length module. To install a half-length module you must populate the half-length holes, as shown below. If you would prefer to have a single slot or both slots populated with half-length hardware at the time of your production order please contact sales@connecttech.com for further details. 16 Revision 0.02

17 Function Location Type minipcie/msata Slots P6A, P6B Molex Edge Card Connector P/N Pinout Pin minipcie Description msata Description V +3.3V GND GND V +1.5V 7 CLKREQ# - 8 UIM_PWR - 9 GND GND 10 UIM_DATA - 11 PCIe CLK UIM_CLK - 13 PCIe CLK UIM_RESET - 15 GND GND 16 UIM_VPP GND GND W_DISABLE# - 21 RESV RESV PCIe RX+ SATA TX V +3.3V 25 PCIe RX- SATA TX- 26 GND GND 27 GND GND V +1.5V 29 GND GND 30 SMB_CLK - 31 PCIe TX- SATA RX- 32 SMB_DATA - 33 PCIe TX+ SATA RX+ 34 GND GND 35 GND GND 36 USB D GND GND 38 USB D V +3.3V 40 GND GND V +3.3V RESV RESV V +1.5V GND GND V +3.3V Revision

18 SIM Socket Function Location Type P/N SIM Socket P7A, P7B FCI Push Pull SIM Socket 7111S1615A01LF Pinout Pin Description 1 UIM_PWR 2 UIM_RST 3 UIM_CLK 4-5 GND 6 UIM_VPP 7 UIM_DATA 8 SHELL 9 SHELL Qseven Gen 2.0 Connector The processor and chipset are implemented on the Qseven Module. This is connected to the carrier via a Foxconn MXM edge card connector. Function Qseven Gen 2.0 Connector Location P8 Type P/N Foxconn 230 Position MXM Edge Card Connector AS0B326-S78N-7F Pinout Refer to Qseven Revision 2.0 Specification (Pg ) 18 Revision 0.02

19 System The System header can be used to connect the power button, reset button, and LED s required to monitor the module performance or state. Function Location System Connector P9 Type FCI Minitek Double Row 5 x 2 P/N Cable G52-10LF CBG134 Pinout Pin Description Pin Description 1 PWR_BTN# 2 GND 3 RST_BTN# 4 GND 5 BATLOW# 6 GND 7 WAKE# 8 GND 9 SUS_S3# 10 GND Qseven Fan If provided, the Qseven CPU Fan can be powered from the carrier. Jumper J2 is used to select the power (+VCC) that the fan will operate at. Function Location Type Qseven Fan Power P10 P/N Molex Solid Header with Friction Lock Pinout Pin Description 1 TACH 2 +VCC 3 GND Revision

20 USB The maximum configuration for a Qseven Gen 2.0 module allows for 2 external USB 3.0 ports, and 2 external USB 2.0 ports. The USB 3.0 signals are sourced from the Qseven module, and run through a Pericom Semiconductor PI3EQX7502AIZDE re-driver. Over current protection, power supply filtering and ESD protection is provided. Function Location USB P11 Type Lotes Co. Ltd Double Row 10 x 2 P/N Cable ABA-USB-152-K01 CBG131 Pinout Pin Description Pin Description 1 Port A - VBUS 20-2 Port A - SSRX- 19 Port B - VBUS 3 Port A - SSRX+ 18 Port B - SSRX- 4 GND 17 Port B - SSRX+ 5 Port A - SSTX- 16 GND 6 Port A - SSTX+ 15 Port B - SSTX- 7 GND 14 Port B - SSTX+ 8 Port A - D- 13 GND 9 Port A - D+ 12 Port B - D Port B - D+ 20 Revision 0.02

21 CAN Bus Function Location CAN Bus P12 Type FCI Minitek Double Row 5 x 2 P/N Cable G52-10LF CBG127 Pinout Pin Description Pin Description 1 CAN PWR 2 CAN L 3 CAN GND CAN GND 7 CAN H 8-9 CAN PWR 10 - AUDIO The Qseven Gen 2.0 Carrier features HD Audio capabilities with the assistance of the Cirrus Logic CS4207 Codec device. From the codec, 1 microphone input and 1 headphone output are available. Function Location HD Audio P13 Type FCI Minitek Double Row 4 x 2 P/N Cable G52-08LF CBG118 Pinout Pin Description Pin Description MIC IN R 4 MIC IN L 5 GND 6 GND 7 HP OUT R 8 HP OUT L microsd CARD Function Location Type microsd Card P14 Molex microsd Memory Card Connector P/N Pinout Pin Description 1 SD_D2 2 SD_D3 3 SD_CMD 4 SD_VDD 5 SD_CLK 6 GND 7 SD_D0 8 SD_D1 9 GND 10 SD_CD# Revision

22 Typical Hardware Installation 1. Ensure all external system power supplies are off. 2. Install the Qseven module into the MXM connector P8. Be sure to follow the manufacturer s directions for proper installation of mounting hardware, heatsink/heatspreader, and any other applicable requirements from the manufacturer. 3. Install the necessary cables for application. At a minimum these would include: a) Power Cable b) CBG113 - DisplayPort Cable or Display Device c) CBG131 - USB Cable (With Keyboard/Mouse Attached) d) msata HDD or external SATA HDD For additional information on the relevant cables, please see the Cables and Interconnects section of this manual. 4. Connect the Power Cable to the Power Supply 5. Switch ON the Power Supply. DO NOT power up your system by plugging in live power. 22 Revision 0.02

23 Current Consumption Details Below are the maximum ratings of the Qseven Gen 2.0 Carrier. Maximums Amps Watts Theoretical absolute maximum total draw of all functionality on the board 6.75A 33.75W Below are measurements taken with the Qseven Gen 2.0 Carrier running in various configurations. Some values will change depending on what Qseven Gen 2.0 module is installed. Please refer to the module manufacturer s manual for full details on the current consumption of the particular module you are using. Actual Measurements Amps Watts Carrier standalone no module installed, powered ON, with no loads W Module Installed [3], single DisplayPort video output, USB keyboard with system sitting in BIOS 0.75A 3.75W Module Installed [3], single DisplayPort video output, single Gigabit Ethernet, USB keyboard, USB mouse, booted Windows running CPU stress test 1.5A 7.5W Note [3]: TBA Revision

24 Mechanical Details A complete 3D STEP Model file of Xtreme/GPU can be downloaded here: 2D Mechanical Dimensioned Drawing (Top and Bottom Views) - All dimension are in (mm) Top View 24 Revision 0.02

25 Bottom View Revision

26 Cables & Interconnect The following table summarizes the Qseven Gen 2.0 Carrier cables available. Drawing No. Part No. Description CKG024 Starter CKG025 Full CTIC Rev 0.00 CBG079 SATA HDD Cable 1 2 CTIC Rev 0.00 CBG127 DB-9 to Minitek Cable 2 2 CTIC Rev 0.00 CBG113 DisplayPort to 20-Pin Minitek Cable 1 2 CTIC Rev 0.00 CBG117 RJ-45 to 10-Pin Minitek Cable 1 2 CTIC Rev 0.00 CBG118 Dual Audio to 8-Pin Minitek Cable 1 1 CTIC Rev 0.00 CBG134 QCG Pin Minitek System Cable 1 1 OEM CBG131 Dual USB 3.0 to 20-Pin Cable 1 1 Up to date cable drawings are available upon request. The cable drawings within this manual are subject to change without notice. Send an request to: support@connecttech.com 26 Revision 0.02

27 CBG079 - SATA HDD Cable 27

28 CBG127 - DB-9 to Minitek Cable 28 Revision 0.02

29 CBG113 - DisplayPort to 20-Pin Minitek Cable Revision

30 CBG117 - RJ-45 to 10-Pin Minitek Cable 30 Revision 0.02

31 CBG118 - Dual Audio to 8-Pin Minitek Cable Revision

32 CBG134 - QCG Pin Minitek System Cable 32 Revision 0.02

33 CBG131 - Dual USB 3.0 to 20-Pin Cable The CBG131 cable is an OEM 19-pin internal type cable, to panel mountable USB 3.0 Type-A Connector(s). Note: Cable will not ship with bracket Revision