PLC SPLITTER PRODUCTS
|
|
|
- Duane Toby Anderson
- 6 years ago
- Views:
Transcription
1 PLC SPLITTER PRODUCTS PLC Splitter Products FIBER OPTIC PRODUCTS PLC SPLITTER PRODUCTS Professional on providing complete, high-performance Optic Communication Components and Premise Distribution Solutions to the customers worldwide. Bare fiber PLC Splitter PLC Splitter Box Block less PLC Splitter PLC Splitter Module NETRADE ASIA COMPANY LIMITED Page 1 of 13
2 BARE FIBER PLC SPLITTER PRODUCTS Bare PLC Splitter Products Bare FIBER OPTIC PLC PRODUCTS Splitter Planar Lightwave Circuit (PLC) Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. Netrade provides whole series of 1xN splitter and 2xN splitter products that are tailored for specific applications. All products meet GR CORE-2001 and GR-1221-CORE-1999 requirements. Features: 1) Low Insertion loss 2) Low PDL 3) Compact Design 4) Good channel-to-channel uniformity 5) Wide Operating Wavelength: From 1260nm to 1650nm 6) Wide Operating Temperature: From -40 to 85 7) High Reliability and Stability Applications: 1) Can be used for FTTX Systems 2) Passive Optical Networks (PON) 3) CATV TV Networks (CATV) 4) Optical Signal Distribution Compliance: 1) Telcordia GR-1209-CORE ) Telcordia GR-1221-CORE ) YD/T NETRADE ASIA COMPANY LIMITED Page 2 of 13
3 BARE FIBER PLC SPLITTER PRODUCTS Bare PLC Splitter Products 1XN PLC FIBER Splitter OPTIC Specifications: PRODUCTS Port Configuration 1x2 1x4 1x8 1x16 1x32 1x64 Insertion Loss (db) Typical Max Loss Uniformity(dB) Max Polarization Dependent Loss(dB) Max Wavelength Dependent Loss(dB) Max Storage Temperature ( ) -40~85 Package Size (mm) 40x4x4 50x4x4 50x7x4 60x12x4 Note: All the data above does not include connectors. Add an additional 0.2dB loss per connector. 2XN PLC Splitter Specifications: Port Configuration 2x2 2x4 2x8 2x16 2x32 2x64 Insertion Loss (db) Typical Max Loss Uniformity(dB) Max Polarization Dependent Loss(dB) Max Wavelength Dependent Loss(dB) Max Storage Temperature ( ) -40~85 Package Size (mm) 40x4x4 50x7x4 60x7x4 60x12x4 Note: All the data above does not include connectors. Add an additional 0.2dB loss per connector. NETRADE ASIA COMPANY LIMITED Page 3 of 13
4 BARE FIBER PLC SPLITTER PRODUCTS Bare PLC Splitter Products ORDERING INFORMATION: NPS XXX X XX X XX X X Port Configuration Input Type Intput Length Type Input Connector Connector N=Netrade 102=1x2 B= 250um Bare 10= 1.0m B= 250um Bare 10= 1.0m 0=None 0=None P=PLC 104=1x4 S=Splitter 108=1x8, L= 900um Loose tube T= 900um Tight buffer 15= 1.5m R= Ribbon 15= 1.5m 1=FC/UPC 1=FC/UPC F= Fan out 20= 2.0m Box with 900um 20= 2.0m 2-FC/APC loose tube 2-FC/APC 116=1x16 3=SC/UPC 3=SC/UPC 132=1x32 4=SC/APC 4=SC/APC 164=1x64 5=LC/UPC 5=LC/UPC 202=2x2 6=LC/APC 6=LC/APC 204=2x4 X=customized X=customized 208=2x8, 216=2x16 232=2x32 NETRADE ASIA COMPANY LIMITED Page 4 of 13
5 BLOCK LESS PLC SPLITTER PRODUCTS Block less PLC Splitter Products Block FIBER less OPTIC PLC PRODUCTS Splitter Planar Lightwave Circuit (PLC) Splitter is a Type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. Netrade provides whole series of 1xN splitter and 2xN splitter products that are tailored for specific applications. All products meet GR CORE-2001 and GR-1221-CORE-1999 requirements. Features: 1) Low Insertion loss 2) Low PDL 3) Compact Design 4) Good channel-to-channel uniformity 5) Wide Operating Wavelength: From 1260nm to 1650nm 6) Wide Operating Temperature: From -40 to 85 7) High Reliability and Stability Applications: 1) Can be used for FTTX Systems 2) Passive Optical Networks (PON) 3) CATV TV Networks (CATV) 4) Optical Signal Distribution Compliance: 1) Telcordia GR-1209-CORE ) Telcordia GR-1221-CORE ) YD/T NETRADE ASIA COMPANY LIMITED Page 5 of 13
6 BLOCK LESS PLC SPLITTER PRODUCTS Block less PLC Splitter Products 1XN PLC FIBER Splitter OPTIC Specifications: PRODUCTS Port Configuration 1x2 1x4 1x8 1x16 1x32 1x64 Insertion Loss (db) Typical Max Loss Uniformity(dB) Max Polarization Dependent Loss(dB) Max Wavelength Dependent Loss(dB) Max Storage Temperature ( ) -40~85 Package Size (mm) 50x7x4 60x12x4 80x20x6 100x40x20 Note: All the data above does not include connectors. Add an additional 0.2dB loss per connector. 2XN PLC Splitter Specifications: Port Configuration 2x2 2x4 2x8 2x16 2x32 2x64 Insertion Loss (db) Typical Max Loss Uniformity(dB) Max Polarization Dependent Loss(dB) Max Wavelength Dependent Loss(dB) Max Storage Temperature ( ) -40~85 Package Size (mm) 50x7x4 60x12x4 80x20x6 100x40x20 Note: All the data above does not include connectors. Add an additional 0.2dB loss per connector. NETRADE ASIA COMPANY LIMITED Page 6 of 13
7 BLOCK LESS PLC SPLITTER PRODUCTS Block less PLC Splitter Products ORDERING INFORMATION: XXX X XX X XX X X NPL Port Configuration Input Type Intput Length Type Input Connector Connector N=Netrade 102=1x2 B= 250um Bare 10= 1.0m B= 250um Bare 10= 1.0m 0=None 0=None P=PLC 104=1x4 L= 900um Loose tube 15= 1.5m 15= 1.5m 1=FC/UPC 1=FC/UPC L=Blockless 108=1x8, T= 900um Tight buffer 20= 2.0m 20= 2.0m 2-FC/APC 2-FC/APC 116=1x16 3=SC/UPC 3=SC/UPC 132=1x32 4=SC/APC 4=SC/APC 164=1x64 5=LC/UPC 5=LC/UPC 202=2x2 6=LC/APC 6=LC/APC 204=2x4 X=customized X=customized 208=2x8, 216=2x16 232=2x32 NETRADE ASIA COMPANY LIMITED Page 7 of 13
8 PLC SPLITTER MODULE PRODUCTS PLC Splitter Module Products PLC Splitter Module FIBER OPTIC PRODUCTS Planar Lightwave Circuit (PLC) Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. Netrade provides whole series of 1xN splitter and 2xN splitter products that are tailored for specific applications. All products meet GR CORE-2001 and GR-1221-CORE-1999 requirements. Features: 1) Low Insertion loss 2) Low PDL 3) Compact Design 4) Good channel-to-channel uniformity 5) Wide Operating Wavelength: From 1260nm to 1650nm 6) Wide Operating Temperature: From -40 to 85 7) High Reliability and Stability Applications: 1) Can be used for FTTX Systems 2) Passive Optical Networks (PON) 3) CATV TV Networks (CATV) 4) Optical Signal Distribution Compliance: 1) Telcordia GR-1209-CORE ) Telcordia GR-1221-CORE ) YD/T NETRADE ASIA COMPANY LIMITED Page 8 of 13
9 PLC SPLITTER MODULE PRODUCTS PLC Splitter Module Products 1XN PLC FIBER Splitter OPTIC Specifications: PRODUCTS Port Configuration 1x2 1x4 1x8 1x16 1x32 1x64 Insertion Loss (db) Typical Max Loss Uniformity(dB) Max Polarization Dependent Loss(dB) Max Wavelength Dependent Loss(dB) Max Storage Temperature ( ) -40~85 Package Size (mm) 40x4x4 50x4x4 50x7x4 60x12x4 Note: All the data above does not include connectors. Add an additional 0.2dB loss per connector. 2XN PLC Splitter Specifications: Port Configuration 2x2 2x4 2x8 2x16 2x32 2x64 Insertion Loss (db) Typical Max Loss Uniformity(dB) Max Polarization Dependent Loss(dB) Max Wavelength Dependent Loss(dB) Max Storage Temperature ( ) -40~85 Package Size (mm) 40x4x4 50x7x4 60x7x4 60x12x4 Note: All the data above does not include connectors. Add an additional 0.2dB loss per connector. NETRADE ASIA COMPANY LIMITED Page 9 of 13
10 PLC SPLITTER BOX PRODUCTS PLC Splitter Box Products ORDERING INFORMATION: XXX X XX X XX X X NPS Port Configuration Input Type Intput Length Type Input Connector Connector N=Netrade 102=1x2 B= 250um Bare 10= 1.0m B= 250um Bare 10= 1.0m 0=None 0=None P=PLC 104=1x4 S=Splitter 108=1x8, L= 900um Loose tube T= 900um Tight buffer 15= 1.5m R= Ribbon 15= 1.5m 1=FC/UPC 1=FC/UPC F= Fan out 20= 2.0m Box with 900um 20= 2.0m 2-FC/APC loose tube 2-FC/APC 116=1x16 3=SC/UPC 3=SC/UPC 132=1x32 4=SC/APC 4=SC/APC 164=1x64 5=LC/UPC 5=LC/UPC 202=2x2 6=LC/APC 6=LC/APC 204=2x4 X=customized X=customized 208=2x8, 216=2x16 232=2x32 NETRADE ASIA COMPANY LIMITED Page 10 of 13
11 PLC SPLITTER BOX PRODUCTS PLC Splitter Box Products PLC Splitter Box FIBER OPTIC PRODUCTS Planar Lightwave Circuit (PLC) Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. It features small size, high reliability, wide operating wavelength range and good channel-to-channel uniformity, and is widely used in PON networks to realize optical signal power splitting. Netrade provides whole series of 1xN PLC Splitter and 2xN PLC Splitter products that are tailored for specific applications. All products meet GR-1209-CORE-2001 and GR-1221-CORE-1999 requirements. Features: 1) Low Insertion loss 2) Low PDL 3) Compact Design 4) Good channel-to-channel uniformity 5) Wide Operating Wavelength: From 1260nm to 1650nm 6) Wide Operating Temperature: From -40 to 85 7) High Reliability and Stability Applications: 1) Can be used for FTTX Systems 2) Passive Optical Networks (PON) 3) CATV TV Networks (CATV) 4) Optical Signal Distribution Compliance: 1) Telcordia GR-1209-CORE ) Telcordia GR-1221-CORE ) YD/T NETRADE ASIA COMPANY LIMITED Page 11 of 13
12 PLC SPLITTER BOX PRODUCTS PLC Splitter Box Products 1XN PLC FIBER Splitter OPTIC Specifications: PRODUCTS Port Configuration. 1x2 1x4 1x8 1x16 1x32 1x64 Insertion Loss (db) Typical Max Loss Uniformity(dB) Max Polarization Dependent Loss(dB) Max Wavelength Dependent Loss(dB) Max Storage Temperature ( ) -40~ U 2U Rack-Mount Box, LGX Box, ODF Box Package Size (mm) Note: All the data above does not include connectors. Add an additional 0.2dB loss per connector. 2XN PLC Splitter Specifications: Port Configuration 2x2 2x4 2x8 2x16 2x32 2x64 Insertion Loss (db) Typical Max Loss Uniformity(dB) Max Polarization Dependent Loss(dB) Max Wavelength Dependent Loss(dB) Max Storage Temperature ( ) -40~85 Package Size (mm) 19 1U 2U Rack-Mount Box, LGX Box, ODF Box Note: All the data above does not include connectors. Add an additional 0.2dB loss per connector. NETRADE ASIA COMPANY LIMITED Page 12 of 13
13 PLC SPLITTER BOX PRODUCTS PLC Splitter Box Products ORDERING INFORMATION: NPB XXX XX X X Port Configuration Box Type Intput Connector Connector N=Netrade 102=1x2 LX= LGX Box, metal 0= None 0= None P=PLC Splitter 104=1x4 19= 19" 1U Rack mount Box 1= FC/UPC 1= FC/UPC B=Box 108=1x8, TP=ODF Box 2= FC/APC 2= FC/APC 116=1x16 WM=Wall mount Box 3= SC/UPC 3= SC/UPC 132=1x32 XX=customized 4= SC/APC 4= SC/APC 164=1x64 5= LC/UPC 5= LC/UPC 202=2x2 6= LC/APC 6= LC/APC 204=2x4 X=cutomized X=cutomized 208=2x8, 216=2x16 232=2x32 264=2x64 NETRADE ASIA COMPANY LIMITED Page 13 of 13
DATA SHEET. PON Optical Splitters. Splice Tube, Flange, Flat Box, ODF and Rack Mount Types PLC OPTICAL SPLITTERS. Overview. Application.
PON Optical Splitters Splice Tube, Flange, Flat Box, ODF and Rack Mount Types Overview Planar Lightwave Circuit (PLC) optical splitters provide best performance being fabricated using silica optical waveguide
Optical Splitter for Telecommunication Networks
Introduction: Optical PLC splitter is a passive optical component which have a significant impact on the efficiency of communication network roll-outs especially in FTTx deployment. The incorporation of
PLC Splitter - Mini Type
Shenzhen Optostar Optoelectronics Co., Ltd 2017. 04(Version 2) Overview Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide
CWDM Module 1. Features
CWDM Module 1. Features Low Insertion Loss High Isolation Low PDL Compact Design Good Channel-to-channel Uniformity Wide Operating Wavelength: 1260nm~1620nm or 1460nm~1620nm Wide Operating Temperature:
PLC Splitter - Rackmount Type
Shenzhen Optostar Optoelectronics Co., Ltd 2013. 08Version 2) Overview Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide
FIBER OPTIC SPLITTERS
FIBER OPTIC SPLITTERS turksat.com.tr SPLITTERS FIBER OPTIC SPLITTERS SPLITTERS FEATURES APPLICATION» Optical performance 100% factory tested» Fiber to the home (FTTH)» UPC, and APC polish types available
Shenzhen KINGTON Optic Co.Ltd.,as a high-tech enterprise,is found in 2005 and engage in R&D,production and exporting fiber optic equipments.equipped with international artworks and test equipments,brought
PLC Splitter, Module/Cassette Type, LIIN25 Features
PLC Splitter, Module/Cassette Type, LIIN25 Features Wide operating wavelength range Good channel-to-channel uniformity High reliability and small size Low Insertion loss and Low PDL Compact Design Good
Planar Lightwave Circuit (PLC) Splitter, 1x4, 1x8, 1x12 and 1x16 Configurations in PEACOC Flexible Tray
FEATURES: Telcordia GR-1221 Compliant Patented accessibility; easy, fast and accurate Low Insertion Loss Up to 24 simplex LC connectors per tray or 12 SC Simplex Connector Excellent Uniformity Low PDL
Telecommunication Products
Telecommunication Products Media Converters Couplers / Splitters WDM CWDM Telecommunication Products Media Converters The media converter is the most economical way to deploy fibre into your network. This
ARIADROP: Fiber to the MDU (FTTM)
DROP: Fiber to the MDU (FTTM) 05 Issue BECAUSE PERFORMANCE MATTERS DROP: Fiber to the MDU (FTTM) DROP DS-BS- 04/07/05 Overview Technologies DROP System is designed to provide both labor and material savings
CWDM Passive Optical Add/Drop Multiplexers
Data Center & Cloud Computing DATASHEET CWDM Passive Optical Add/Drop Multiplexers Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2017 CWDM Passive Optical Add/Drop Multiplexers 01 Overview
Single Stage Isolator
Single Stage Isolator 1.Description: Single stage isolator is a kind of the optical passive device, its basic function is to realize the positive transfer optical signal, and inhibit reverse light. 2.Features:
FC Type Connector. Standards YD/T IEC GR-326-CORE
FC Type Connector Product Introduction Optical Fiber Jumper is the cable with a connector installed on its each end respectively to make the jumping connection of light path. Features Standard metal parts,
Passive components Introduction. Optical Splitters and Couplers. Passive components - Optical Splitters and Couplers
Introduction Optical Splitters and Couplers Today s leading TTH technology is PON (Passive Optical Network) technology. This approach differs from most of the telecommunications networks in place today
Introduction to WaveSmart Optical Components
Introduction to WaveSmart Optical Components Clearfield delivers unparalleled fiber performance with its WaveSmart optical components - custom built for the unique light requirements and interoperability
TECHNICAL SPECIFICATIONS. Planar Optical Splitter Module
Spec No. JCC121024-Cenkablo_P TECHNICAL SPECIFICATIONS For Planar Optical Splitter Module (1 N ISO Color) - Premium Grade - 1/11 Table of Contents 1. Document History.. 3 2. General Description... 3 3.
Max. db Channel Uniformity
General Information Applications: - TTX Deployments - GPON Networks - CATV Links - Optical Signal Distribution euroclust offers splitters based on planar lightwave circuit (PLC) technology and fusion based
Dual Stage Isolator. 1.Description:
Dual Stage Isolator 1.Description: Dual stage isolator is a kind of the optical component, its basic function is to realize the positive transfer optical signal, and inhibit reverse light. 2.Features:
FDH Sealed Fiber Distribution Hub. Features and Benefits
Introducing the sealed fiber distribution hub (FDH) 4000 from CommScope. Increasingly, aesthetic ordinances and equipment size restrictions are making it more difficult to secure permits in FTTx deployments.
Siemon PON Fiber Cabling Solutions
Siemon PON Fiber Cabling Solutions WWW.SIEMON.COM 8 Siemon Enterprise PON Fiber Cabling Solution Siemon Enterprise Passive Optical Network (PON) Fiber Cabling Solution improves the modularity, flexibility
Passive Optical Components An Evolant Solutions Product
Description offers a full line of passive optical component products that is specially designed for our complete fiber optic hardware portfolio to allow maximum network flexibility. Available components
NetSpan FDH Series. Integrated Fiber Distribution Hub Solution. Outside Plant for Business-Critical Continuity
NetSpan FDH Series Integrated Fiber Distribution Hub Solution Outside Plant for Business-Critical Continuity Description The NetSpan FDH (Fiber Distribution Hub) series of enclosures provides connections
Compact Optical Splitter Module for FTTH Outside Plant
Compact Optical Splitter Module for FTTH Outside Plant Norihiro Momotsu, 1 and Kazuya Ogata 1 Passive Optical Network (PON) system has expanded extensively as an optical network in the construction of
TFF Tap Splitter, 1x2 and 2x2 configurations in PEACOC Flexible Tray
FEATURES: RoHS 6/6 Compliant Low Insertion Loss Up to 24 simplex LC connectors per tray or 12 SC Simplex Connector Patented accessibility; easy, fast and accurate Flat and Wide Passband Low Polarization
3M TM PLC Splitters DATASHEET
DATASHEET 3M TM PLC Splitters 3M planar light circuit splitters are fully passive optical branching devices, that exhibit uniform signal splitting for the most advanced optical networks. These planar silica
Passive Optical Networking (PON)
Passive Optical Networking (PON) Standards: ITU-T G.984 GPON (Gigabit PON) is an evolution of the BPON standard. Uses new native Generic Encapsulation Method (GEM) transport layer that supports multiple
Data Center & Cloud Computing DATASHEET. SDH Erbium Doped Fiber Amplifier Data Center & Cloud Computing Infrastruture Solutions
Data Center & Cloud Computing DATASHEET SDH Erbium Doped Fiber Amplifier Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2017 SDH Erbium Doped Fiber Amplifier 01 Description The product is
Specification for Dispersion Slope Compensating Module for SMF Transmission Fiber SMF-DK
Specification for Dispersion Slope Compensating Module for SMF Transmission Fiber SMF-DK Version 1.45 2017-04-28 0 Ordering information Order code format: SMFDK-S-xxx-yy-zz Mechanical option Connector
Specification for Dispersion Slope Compensating Module for LEAF Transmission Fiber LEAF-DK
Specification for Dispersion Slope Compensating Module for LEAF Transmission Fiber LEAF-DK Version 1.4 2013-03-18 1 Ordering information Order code format: LEAFDK-S-xxx-yy-zz Mechanical option Connector
FttX Passives. Intelliport tm. Flexible, Customizable, Affordable. Data Sheet. LGX Cassette. Passive Filter Module
Intelliport tm FttX Passives LGX Cassette Passive Filter Module Multi-Service Aggregation Multiplexer (MSAM) FttX OSP Optical Taps FttX OSP Optical Splitters Flexible, Customizable, Affordable 1 LGX Cassette
Clearview Cassette. Clearview Blue
Application The Clearview Blue provides 12-24 ports of connectivity, scaling one cassette at a time, for patch and splice (Clearfield s in-cassette splicing solution), patch only (stubbed) or plug-and-play
Section 28 Fiber Optics: Fiber Distribution Cabinets and Accessories
Fiber Optics: Section 28 Section 28 Fiber Optics: Fiber Distribution Cabinets and Accessories Table of Contents Page COYOTE Axcess Solutions COYOTE Pre-Terminated Cabinets Wall Mount...28-2 Rack Mount...28-2
Specification for Dispersion Slope Compensating Module for TW-RS Transmission Fiber in the C-band TWRS-DK
Specification for Dispersion Slope Compensating Module for TW-RS Transmission Fiber in the C-band TWRS-DK Version 1.12 2015-09-09 1 Ordering information Order code format: TWRSDK-S-xxx-yy-zz Mechanical
Closet Connector Housing (CCH) Splitter Module
Closet Connector Housing Features and Benefits Gen III FTTx Splitter with bracket to fit LANscape Solutions housings Enables passive optical network (PON) design with existing LANscape Solutions housings
LEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE OPTICAL TERMINATOR TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http:// Optical Terminator Optical Terminators are used to terminate unused fiber connector ports in
BUSINESS CLASS SERVICES. COMMERCIAL ACCESS SOLUTIONS Ordering Guide
BUSINESS CLASS SERVICES COMMERCIAL ACCESS SOLUTIONS Ordering Guide POINT - TO - POINT ARCHITECTURE CUSTOMER$$PREMISES COMM$ACCESS$ ROUTER 8ch$&$10ch$CWDM$HiDT mounted$in$a$medium$ust Fiber$Splice$Shelf$5$1RU
LightMUX. Passive Optical Networking
PORTFOLIO OVERVIEW LightMUX LightMUX Passive Optical Networking Optelian FTTx/PON splitters and wavelength division multiplexers (WDMs) make the distribution of triple-play (voice, data, and video) traffic
FTTX Solutions Passive Optical Splitter Modules. 7th Edition
Passive Optical Splitter Modules 7th Edition Passive Optical Splitter Modules Introduction...1 Applications...2 Splitter Specifications...3 Mini Plug-and-Play Modules...4 GF Modular Splitter Block...5
SLD Drive SLD. Board FC/APC Connector. TEC Control. Board. Control Circuits. Control interface DB9 (Female)
Product Specification, Revision 1.0 SLD Light Source Module Part Number: IPSDS0902-1. Configuration SLD Drive Board SLD TEC Control Board FC/APC Connector Control Circuits Control interface DB9 (Female)
P. O Box , Riyadh SAUDI ARABIA HD- FIBER DISTRIBUTION TERMINAL ( HD-PROMEX- RA ) 768F
HD- FIBER DISTRIBUTION TERMINAL ( HD-PROMEX- RA ) 768F HD- PROMEX- RA-768 is a High Density Fiber Distribution terminal cabinets enables telecom operators and service providers to maintain and manage the
Rack Mounted Products
SRS3000 1U Patch Only Shelf Prysmian Part Number: See table on following pages. The SRS3000 Patch Only Shelf is a modular unit available in a variety of configurations for integration in to 19 and ETSI
Rack Mounted Products
SRS4000 Distribution Sub-Rack Prysmian Part Number: See Below The SRS4000 Distribution Sub-Rack is a modular sub-rack available in a variety of configurations for integration into 19 / ETSI / ANSI racks,
PLC Products. Dr. K.R.Suresh Nair
PLC Products Dr. K.R.Suresh Nair 2 Summary Established in 2005 Technical support from Hitachi, Japan FTTH splitters (1xN, 2xN where N=4,8,16,32,64) Capacity of 30K per annum Automated performance testing
Optical Component Environmental Test System OCETS Plus Series
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS Optical Component Environmental Test System OCETS Plus Series Key Features High Return Loss option (HiRL) monitors RL up to 70 db Up to 210 device channels (420
MTP/MPO Cable Assemblies
MTP/MPO Cable Assemblies MTP cable assemblies are multi-fiber patch cords suitable for high-density back plane and PCB solutions. MTP brand Fan-Out, Interconnect and Trunk cable offer up to 36 times the
SC/APC Connector. CATV Active device Telecommunication. Metro Local Area Data processing
Introduction As the industry s leading supplier of single-mode cable assemblies, Optical Fiber offers the most complete line of connectors and factory-terminated cables. From single-fiber jumpers to high
Medallion 7200 Series CATV Fiber Amplifier
MODEL Medallion 7200 Series CATV Fiber Amplifier ERBIUM/YTTERBIUM DOPED FIBER AMPLIFIER (EYDFA) The Medallion 7200 series product line is a family of state-of-the-art high performance CATV Erbium/Ytterbium
Medallion 7200 Series CATV Fiber Amplifier
The Medallion 7200 series product line is a family of state-of-the-art high performance CATV Erbium/Ytterbium Doped Fiber Amplifiers (EYDFA). Packaged in a convenient 2 RU housing, this line of fiber amplifiers
DWDM 200G Mux/Demux 4Ch 8Ch 16Ch 32Ch
4, 8, 16, 32Ch DWDM Mux and Demux Lightem DWDM Mux and Demux are designed to multiplex multiple DWDM channels into one or two fibers. The common configuration is 4, 8, 16 and 32 channels. Available in
PREMIUM GRADE PATCHCORD / PIGTAIL
01 Go4Fiber provides the broadest choice of patchcords and pigtails to the industry including LC, SC, FC, ST, E2000 with Ultra-polished (UPC), Angle-Polished (APC) or other polish requirement. With our
Fiber-to-the-Home (FTTH) Pedestal
Purpose: To describe Fiberdyne's FTTH distribution enclosure and its configuration options. Conceptual Usage: The FTTH Pedestal is a general-purpose, outdoor enclosure. It is the main node for voice, data
PREMIUM GRADE PATCHCORD / PIGTAIL
01 Go4Fiber provides the broadest choice of patchcords and pigtails to the industry including LC, SC, FC, ST, E2000 with Ultra-polished (UPC), Angle-Polished (APC) or other polish requirement. With our
Product Description. Features & Benefits. Multilink Inc All Rights Reserved. Removable Seal Window Opening:
SFX-0 Single In Line Fiber Optic Splice Enclosure 020-234-10 Product Description The Starfighter Xpress comes from a heritage of proven and established in-line splice enclosures that are tested in accordance
LEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE FIBER OPTIC ATTENUATOR Fixed plug-in type TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http://www.twfiberoptic.com Fixed plug in type Attenuator Fixed plug in fiber
OptiTect Indoor Local Convergence Cabinet, Gen III Series
Features and Benefits Industry-leading cabinet size Significant freight, storage and installation efficiencies Full factory-stubbed cabinets Enables quicker installation and rapid emergency restoration
PATCH-CORD. SC Patch-Cord APPLICATIONS AVAILABILITY FEATURES SPECIFICATIONS. Active device termination Local Area Networks (LANs)
SC Patch-Cord APPLICATIONS CATV Metro Test equipment Active device termination Local Area Networks (LANs) Premise installations Telecommunicatio n networks Data processing networks Wide Area Networks (WANs)
3M SLiC Fiber Aerial Terminal Closure 530 Internal for Direct Spliced Drop Terminations. 3M External Cable Assembly Module (ECAM) 12mm Drop Entry Kit
3M SLiC Fiber Aerial Terminal Closure 530 Internal Drop Terminations for Direct Spliced Drops The 3M SLiC Fiber Aerial Terminal Closure 530 with Internal Drop Termination is an aerial, strand-mount, free-breathing
Switch Protection Module
www.lumentum.com Data Sheet The Lumentum switch protection module offers quick protection and restoration to prevent data loss due to cable failure, port failure, or catastrophic failures. An optical signal
PIONEER GOODS COMMUNICATION CO.,LIMITED
PIONEER GOODS COMMUNICATION CO.,LIMITED PRODUCTS LIST PG201501 1.FIBER OPITC TESTING EQUIPMENTS PG-OLS200 dual wavelength laser source Wavelength: 1310/1550 (others specify on requests, Max wavelength
LATCHING FIBER OPTIC 1xN SWITCHES
LATCHING FIBER OPTIC 1xN SWITCHES OVERVIEW The fiber optic LATCHING 1xN switches are very fast bidirectional opto-mechanical switches based on the MEMS technology. The component makes an optical connection
3M Passive Optical Splitter Shelves and Modules
Communication Markets Division 3M Passive Optical Splitter Shelves and Modules 3M offers a robust portfolio of passive optical fiber splitter products made to enable easy configuration, design, ordering,
Ordering Guide of the Single-Mode Connectorized Fiber Cables (Pigtails & Jumpers) and Single-Mode Connector Mating Adapters
Page 1 of 9 Ordering Guide of the Single-Mode Connectorized Fiber Cables (Pigtails & Jumpers) and Single-Mode Connector Mating Adapters This document provides assistance with the selection of single-mode
Cable Assembly Test System. MS12001 System
Cable Assembly Test System KEY FEATURES MS10P is a powerful controller unit with 10 slots MS10E Expansion Chassis for up to 10 extra slots Remote control via Ethernet/GPIB card Turn-key software Local
LightBend TM Dual 2x2 Bypass Multimode Fiberoptic Switch
(Bidirectional) (Protected by U.S. patent 6823102 and pending patents) Features Low Optical Distortions 8 Ports Integration High Isolation High Reliability Fail-Safe Latching Epoxy-Free Optical Path Low
OAsys. 24 Fibre Swing Out Splicing and Patching Shelf. Rack Mounted Products. Features and Benefits. Prysmian Part Numbers: See Table on page 3
Fibre Swing Out Splicing and Patching Shelf Prysmian Part Numbers: See Table on page 3 Picture shows shelf fitted with one FC panel and one SC panel The OAsys Fibre Swing Out Splicing and Patching Shelf
DATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 40 Channels C21-C60 Dual Fiber DWDM Mux Demux + Monitor Port. 1U Rack Mount, LC/UPC
Data Center & Cloud Computing DATASHEET 40 Channels C21-C60 Dual Fiber DWDM Mux Demux + Monitor Port 1U Rack Mount, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2018 Overview DWDM
PASSIVE OPTICAL SPLITTER
1 GR-1209 & GR-1221: BENCHMARKING THE PERFORMANCE OF NEXT GENERATION HIGH SPEED ACCESS NETWORKS White Paper MAY 2015 PASSIVE OPTICAL SPLITTER Benchmarking the Performance of Next Generation High Speed
FTTX Fiber Optic Cabinet Packages Priority Electronics USA
Priority Electronics USA Priority Electronics Ltd Application Hoffman FTTX enclosures are designed to protect and manage fiber optic cable for broadband delivery in outdoor applications. Constructed with
DATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 40ch DWDM Mux Demux + Montior Port nm Port for 40G/100G. 1U Rack Mount, LC/UPC
Data Center & Cloud Computing DATASHEET 40ch DWDM Mux Demux + Montior Port + 1310nm Port for 40G/100G 1U Rack Mount, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV10 2018 Overview DWDM
Agilent Lightwave Solution Platform
Agilent Lightwave Solution Platform Configuration Guide May 2005 This guide provides configuration details for the Agilent 816xB family of mainframes and modules, including options and accessories. 8163B
FIBER OPTIC 1xN SWITCH coaxial design
FIBER OPTIC xn SWITCH coaxial design OVERVIEW sercalo's fiber optic xn switches are bidirectional opto-mechanical switches based on a coaxial design where a single MEMS mirror redirects light from a common
TAIHAN ELECTRIC WIRE CO.,LTD. FTTH Connectivity Material Presentation
TAIHAN ELECTRIC WIRE CO.,LTD FTTH Connectivity Material Presentation FTTH Diagram 5 Central Office Part FDF & ODF Part Description Product Interconnection frame Fiber Distribution Rack Cross connection
DATA CENTER SOLUTIONS
DATA CENTER SOLUTIONS MTP Cabling Solutions MTP Cassette Solutions MTP Distribution Center Solutions Aqua 10 (OM3) Gigabit Patchcords Tera Flow Single Mode Bend Insensitive Patchcords Fiber Optic Taps
Splitter Wave Division Multiplexer Modules Custom modules to meet your specialty network applications
Splitter Wave Division Multiplexer Modules Custom modules to meet your specialty network applications Features and Benefits Cost effective solutions Diverse range of split ratios Fits standard 7-inch LGX
FDH Sealed fiber distribution hub and integrated splitter module solution
FDH 4000 Sealed fiber distribution hub and integrated splitter module solution The United ations estimates that 70 percent of world population will be urban by 2050, meaning cities will need to have supercity
Updated in Free Product Guide for Your Network. WDM & FTTx. Catalog
Updated in 2017 Free Product Guide for Your Network WDM & FTTx Catalog FS.COM WDM & FTTx This catalog is a guide of FS.COM WDM & FTTH solutions. FS.COM self-develops a series of OTN (optical transport
Organics in Photonics: Opportunities & Challenges. Louay Eldada DuPont Photonics Technologies
Organics in Photonics: Opportunities & Challenges Louay Eldada DuPont Photonics Technologies Market Drivers for Organic Photonics Telecom Application Product Examples Requirements What Organics Offer Dynamic
Racks. IP41 RS3000 Rack RAL7038. Features and Benefits. Prysmian Part Numbers: See below. Kit Contents. Additional Items Recommended
IP41 RS3000 Rack RAL7038 Prysmian Part Numbers: See below Features and Benefits The rack can accommodate the range of SRS3000 shelves and sub-racks. Please note that other 19 rack mounted products and
Basic Fiber Optic Concepts
Basic Fiber Optic Concepts Advantages of Fiber Optics A signal can be sent over long distances (200 Km/125 miles) without the need for regeneration Not sensitive to electromagnetic or radio frequency
C2LINX. Ordering Guide
Ordering Guide Table of Contents Overview... 3 Key Benefits... 3 Panels... 3 Section One: Chassis... 4 Section 3: Trays... 5 Section 4: Modules... 6 a. Patch... 6 b. Patch and Splice... 7 c. Pre-terminated
Overview of the CWDM units cont.
DATA SHEET DB4133-E Issue F Page 6 of 8 Overview of the CWDM units cont. 8 channel CWDM - lower band FPM76/8LCWDM 8-channel CWDM, 1271-1451 FP65/8LCWDM 8 channel CWDM, 1271-1451 1271 1291 1311 1331 1351
3M Fiber Dome Terminal Closures FDTC 08M and FDTC 08S External Drop Termination
3M Fiber Dome Terminal Closures FDTC 08M and FDTC 08S External Drop Termination The compact 3M Fiber Dome Terminal Closures FDTC 08M and FDTC 08S are hermetically sealed fiber dome terminal closures for
Racks. RS3000 Rack. Features and Benefits. Prysmian Part Numbers: See below. Kit Contents. Additional Items Recommended. Prysmian Part Numbers
Racks RS3000 Rack Prysmian Part Numbers: See below The RS3000 Rack is a standard rack with 19 mounting rails, used to accommodate a range of SRS3000 shelves and sub-racks or any other 19 rack mounted products.
Product Catalog FIBEROPTIC TEST & MEASUREMENT
Product Catalog FIBEROPTIC TEST & MEASUREMENT TABLE OF CONTENT INTRODUCTION CORPORATE OVERVIEW...3 PRODUCTS WIDE BAND COMPONENT TEST SYSTEM WCS Wide Band Component Test System...5 TUNABLE LASERS TLS5 Tunable
Optical Fiber Systems. Optical Fiber. Premise Connectivity Systems S Y S T E M S
Premise Connectivity Systems Optical Fiber S Y S T E M S w w w. s i g n a m a x. c o m High-Density Rack-Mount Optical Fiber Enclosures Rack-Mount Optical Fiber Distribution Enclosures Rack-Mount Optical
OPCOM100 series CWDM System
Datasheet OPCOM100 Series CWDM System OPCOM100 series are Raisecom's Coarse Wavelength Division Multiplexing devices. The CWDM product line is developed and designed for fully utilizing the existing fiber
COYOTE Fiber Optic Closures. Featuring the Silicone Grommet Sealing System. The 2nd Generation of Products
Fiber Optic Closures Featuring the Silicone Grommet Sealing System The 2nd Generation of Products PAGE 1 2 3 4 5 6 7 8 10 12 14 18 19 20 22 24 25 26 28 CONTENTS Maximum Splice and Express Capacities for
PLANAR LIGHTWAVE CIRCUITS FOR USE IN ADVANCED OPTICAL INSTRUMENTATION
PLANAR LIGHTWAVE CIRCUITS FOR USE IN ADVANCED OPTICAL INSTRUMENTATION AN ENABLENCE ARTICLE WRITTEN BY DR. MATT PEARSON, VP TECHNOLOGY & ASHOK BALAKRISHNAN, DIRECTOR OF PRODUCT DEVELOPMENT PUBLISHED IN
FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU
FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU FIBREOPTIC RACK MOUNT ENCLOSURE: FIXED The JCS Technologies fixed rack mountable fibreoptic break out enclosure is suitable for patching
DATASHEET. Data Center & Cloud Computing Infrastruture Solutions. 40ch DWDM Mux Demux + Monitor Port. 1U Rack Mount, LC/UPC
Data Center & Cloud Computing DATASHEET 40ch DWDM Mux Demux + Monitor Port 1U Rack Mount, LC/UPC Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2017 Overview DWDM Mux Demux 01 The 40ch Mux
FACT OPTICAL DISTRIBUTION FRAME SYSTEM
FACT OPTICAL DISTRIBUTION FRAME SYSTEM Fiber Connectivity for Splice/ Patch and Patch/Patch For almost 30 years, TE Connectivity has led the industry with solutions such as FIST fiber management system,
GEOLT. Gigabit Ethernet Optical Line Terminal. About the Product
About the Product Presenting the new and advanced Light Link Series 2 (). Designed for IEEE802.3ah compliant GEPON, the is part of PBN s high density FTTx product range. The and the matching ONU subscriber
PLC Wafer. PLC Splitter. Patch Cord. FTTx MDF
PLC Wafer PLC Splitter Patch Cord FTTx MDF Contents Company Overview Honor& Certifications PLC Splitter Wafer PLC Splitter Chip 1 Channel Fiber Array Fiber Array Bare Type PLC Splitter Tube Type PLC Splitter
FTTH SOLUTION. Content. Contral. Apartment. house. house 13P. 11P Adapter 11P 10P 11P 13P 13P. 10P Mechanical Splice 11P 10P 11P 14P 10P.
FTTH SOLUTION OLT 9P Contral Office V-ONT FDF 10P 6P Sleeve PLC Splitter Apartment ONT 2.5G SFT 8P Patchcord V-ONT Optical hub 12P Cross Tap Fiber Closure 11P Field Installable 13P Connector Plier house
Pre-terminated Multi Fibre Cable Assemblies
AFL manufactures a broad range of factory terminated and tested multi-fibre cable assemblies. These assemblies are available in various fibre types and counts, cable constructions and connector options.
Opterna FTTx Product Guide.
Opterna FTTx Product Guide www.opterna.com Opterna is a US-based opto-electronic product company established in 1992. Opterna has manufacturing facilities and sales and support offices in the U.S, Europe,
FSC 288, 432, 576 or 1152-Port PON Cabinets
Application Provides an interconnect environment from the DF network through the optical passive splitter to the AF network in an FTTH PON OSP cabinet. The FieldSmart FSC PON 1152- Port Cabinet sets the
CONNECTOR SOLUTIONS. FASTConnect FUSEConnect Field Master
CONNECTOR SOLUTIONS FASTConnect Provide some of the fastest terminations in the industry Does not require a crimp or special assembly tools Mechanical, true no epoxy/no polish (NENP) connectors FUSEConnect
High Density LSX 288-Position Panel
CommScope introduces the new high-density LSX 288-position panel available preterminated with intrafacility (IFC) or outside plant (OSP) cables or in termination and splice configurations. CommScope s