Prices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by Lighthorse Technologies, Inc.
|
|
|
- Florence Preston
- 6 years ago
- Views:
Transcription
1 Section Index Connectors Specifications Flexible Cable Panel Mount Bulkhead PCB Mount In Series Adaptors Other Information Assembly Instructions Cable Assembly Cable Information Numerical Index Prices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by 92 Tel: u Fax: info@rfconnector.com
2 Specifications connectors are the most popular coaxial connector. The special bayonet design allows easy mating and unmating. 50 ohm connectors provide repeatable electronic perfomance from DC to 4 GHz. 75 ohm connectors are suitable for appliations up to 1 GHz. All 50 and 75 ohm connectors are intermatable. connectors are designed to accomodate a large variety of RG and industry standard cables. They are available in crimp, clamp, and twist on cable styles. A full line of printed circuit board receptacles, bulkhead receptacles, and other accesories complement the product offering. LTI connectors are designed to conform to MIL-C specifications. The series coaxial connector works well in lower microwave frequency applications including monitors, LAN, telecommuniction devices and test equipment. Interface Mating Dimensions PLUG Letter Minimum Maximum A B Slotted and flared to meet electrical and mechanical requirements C D E F G H I J K Letter Minimum Maximum A B C D E F G H I J K L M N O P Q JACK 93
3 O Specifications ELECTRICAL RATINGS Impedance 50 ohm 75 ohm Frequency Range DC to 4 GHz DC to 1 GHz VSWR Straight Right Angle 1.3 max 1.35 max Voltage Rating (at sea level, in R rms, 50Hz) 500 max Dielectric Withstanding Voltage (at sea level, in R rms, 50Hz) 1500 Insulation Resistance 5000 MΩ min Insertion Loss 0.2 db 3.0 GHz Contact Resistance Center Contact Outer Contact 2.0 mω max 2.0 mω max MECHANICAL RATINGS Mating Bayonet style snap-on coupling Durability 500 matings max Coupling Nut Torque 0.6 to 2.5 in-lbs Coupling Nut Retention Force lbs max Contact Captivation 6.1 lbs max Cable Retention RG-174, 188, 316, 179 RG-58, lbs. minimum 28.7 lbs. minimum ENVIRONMENTAL RATINGS Temperature Range -65 C to C Thermal Shock MIL-STD-202F, Method 1017G, Condition A Vibration MIL-STD-202F, Method 204D, Condition A Corrosion MIL-STD-202F, Method 101D, Condition B Mechanical Shock MIL-STD-202F, Method 213B, Condition A MATERIALS Material Plating Connector Body Brass per QQ-B-626 Nickel Center Contact Male Brass per QQ-B-626 Gold Female Beryllium Copper per QQ-C-530 Gold Insulator Teflon, Delrin, Polypropylene None Gasket Silicone Rubber None Crimp Ferrule Annealed Copper per WW-T-799 Same as body 94
4 Flexible Cable Straight Crimp Plug Cable Type LTI-BSM11NT-XXX RG-316,174,188;Q1,D316 LTI-7BSM11NT-179 RG-179 (75 ohm) TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Page 172, Line 16 Straight Crimp Plug Cable Type Dimension LTI-BSM11NT- XXX RG-58,141,142,223,400 A: 3.1 B: 4.4 LTI-7BSM11NT-59 RG-59 (75 ohm) A: 3.9 B: 5.6 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Page 172, Line 16 Right Angle Crimp Plug Cable Type LTI-BLM11NT-XXX RG-316,174,188;Q1,D316 LTI-7BLM11NT-179 RG-179 (75 ohm) TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. ASSEMBLY INST.: Page 177 Page 172, Line 17 95
5 Flexible Cable Right Angle Crimp Plug Cable Type Dimension LTI-BLM11NT-XXX RG-58,141,142,223,400 A: 3.1 B: 4.4 LTI-7BLM11NT-59 RG-59 (75 ohm) A: 3.9 B: 5.6 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. ASSEMBLY INST.: Page 177 Page 172, Line 17 Straight Crimp Jack Cable Type LTI-BSF11NT-XXX RG-316,174,188;Q1,D316 LTI-7BSF11NT-179 RG-179 (75 ohm) TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Page 172, Line 16 Straight Crimp Jack Cable Type Dimension LTI-BSF11NT-XXX RG-58,141,142,223,400 A: 3.1 B: 4.4 LTI-7BSF11NT-59 RG-59 (75 ohm) A: 3.9 B: 5.6 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Page 172, Line 16 96
6 Flexible Cable Bulkhead Crimp Jack Cable Type M.H. LTI-BSF13RNT-XXX RG-316,174,188;Q1,D LTI-7BSF13RNT-179 RG-179 (75 ohm) 14 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Page 172, Line 18 Bulkhead Crimp Jack Cable Type M.H. Dimension LTI-BSF13RNT-XXX RG-58,141,142,223, A: 3.1 B: 4.4 LTI-7BSF13RNT-59 RG-59 (75 ohm) 14 A: 3.9 B: 5.6 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See Part Numbering Chart on page 3 for more info. Page 172, Line 18 Isolated Bulkhead Crimp Jack Cable Type M.H. LTI-BSF13RENT-XXX RG-316,174,188;Q1,D LTI-7BSF13RENT-179 RG-179 (75 ohm) 14 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. Page 172, Line 18 97
7 Flexible Cable Isolated Bulkhead Crimp Jack Cable Type M.H. Dimension LTI-BSF13RENT-XXX RG-58,141,142,223, A: 3.1 B: 4.4 LTI-7BSF13RENT-59 RG-59 (75 ohm) 14 A: 3.9 B: 5.6 TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See Part Numbering Chart on page 3 for more info. Page 172, Line 18 Straight Clamp Plug Cable Type LTI-BSM21NT-XXX RG-58,141,142,223,400 LTI-7BSM21NT-59 RG-59 (75 ohm) TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. ASSEMBLY INST.: Page 178 Page 172, Line 19 Straight Clamp Plug Cable Type LTI-BSM21NT-XXX RG-8,213,214; Q LTI-7BSM21NT-11 RG-11 (75 ohm) TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. ASSEMBLY INST.: Page 178 Page 172, Line 19 98
8 Flexible Cable Right Angle Clamp Plug Cable Type LTI-BLM21NT-XXX RG-58,141,142,223,400 LTI-7BLM21NT-59 RG-59 (75 ohm) TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. ASSEMBLY INST.: Page 179 Page 172, Line 20 Straight Clamp Jack Cable Type LTI-BSF21NT-XXX RG-58,141,142,223,400 LTI-7BSF21NT-59 RG-59 (75 ohm) TO CREATE COMPLETE PART NUMBER: Fill in Cable Type where XXX is. See ing Chart on page 3 for more info. ASSEMBLY INST.: Page 179 Page 172, Line 21 Panel Mount Plug with Solder Cup Termination M.H. LTI-BSM42NT 39 LTI-7BSM42NT (75 ohm) 39 MOUNTING HOLE (M.H.): Page
9 Panel Mount/Bulkhead Panel Mount Jack with Solder Cup Termination M.H. LTI-BSF42NT 39 LTI-7BSF42NT (75 ohm) 39 MOUNTING HOLE (M.H.): Page 175 Front Mount Bulkhead Plug with Solder Cup Termination M.H. LTI-BSM43NT 10 LTI-7BSM43NT (75 ohm) 10 Front Mount Bulkhead Jack with Solder Cup Termination M.H. LTI-BSF43NT 10 LTI-7BSF43NT (75 ohm)
10 Bulkhead/PCB Mount Isolated Front Mount Bulkhead Jack with Solder Cup Termination M.H. LTI-BSF43ENT 10 LTI-7BSF43ENT (75 ohm) 10 Right Angle Bulkhead Jack with Solder Cup Termination M.H. LTI-BLF43NT 10 LTI-7BLF43NT (75 ohm) 10 Vertical PCB Thru Hole Jack, Short M.H. LTI-BSF54ZNT 28 LTI-7BSF54ZNT (75 ohm)
11 PCB Mount Vertical PCB Thru Hole Jack, Medium M.H. LTI-BSF54MNT 28 LTI-7BSF54MNT (75 ohm) 28 Vertical PCB Thru Hole Jack, Tall M.H. LTI-BSF54LNT 28 LTI-7BSF54LNT (75 ohm) 28 Vertical PCB Thru Hole Jack, Commercial High Profile M.H. Housing LTI-BSF54HNPB 12, 33 Black LTI-BSF54HNPW 12, 33 White LTI-7BSF54HNPB (75 ohm) 12, 33 Black LTI-7BSF54HNPW (75 ohm) 12, 33 White,
12 PCB Mount Right Angle PCB Thru Hole Jack, Commercial M.H. Profile Housing LTI-BLF54_NP_ LTI-7BLF54_NP_ (75 ohm) 12, 33 Z Dim A: 12.5 B: Black W: White LTI-BLF54_NP_ LTI-7BLF54_NP_ (75 ohm) 12, 33 M Dim A: 13.1 B: Black W: White LTI-BLF54_NP_ LTI-7BLF54_NP_ (75 ohm) 12, 33 H Dim A: B: Black W: White TO CREATE PART NUMBER: Insert the corresponding letter from the required profile in the space after the 4, at the center of the part number. Insert the letter from the desired housing color at the end of the part number. TO CREATE PART NUMBER: Take first part of number, insert letter for profile (H, M, or L) after 4 and before N then specify housing color by adding the first letter of color to the end, i.e, LTI-BLF54HNTW., 175 Right Angle Commercial PCB Thru Hole Jack, Metal Housing M.H. Profile LTI-BLF54_NPM LTI-7BLF54_NPM (75 ohm) 12, 33 M Dim A: 13.1 LTI-BLF54_NPM LTI-7BLF54_NPM (75 ohm) 12, 33 H Dim A: TO CREATE PART NUMBER: Insert the letter from the desired housing color at the end of the part number.,
13 In Series Adapters Straight Plug to Plug Adapter LTI-A2BSMMNT LTI-7A2BSMMNT (75 ohm) Straight Jack to Jack Adapter LTI-A2BSFFNT LTI-7A2BSFFNT (75 ohm) Panel Mount Jack to Jack Adapter M.H. LTI-A2BSFF2NT 39 LTI-7A2BSFF2NT (75 ohm) 39 MOUNTING HOLE (M.H.): Page
14 In Series Adapters Straight Bulkhead Jack to Jack Adapter M.H. LTI -A2BSFF3NT 14 LTI -7A2BSFF3NT (75 ohm) 14 Straight Jack to Plug Adapter LTI-A2BSFMNT LTI-7A2BSFMNT (75 ohm) Right Angle Jack to Plug Adapter LTI-A2BLFMNT LTI-7A2BLFMNT (75 ohm) 105
15 In Series Adapters T Adapter, Plug to Plug to Plug LTI-A3BTMMMNT LTI-7A3BTMMMNT (75 ohm) T Adapter, Jack to Jack to Jack LTI-A3BTFFFNT LTI-7A3BTFFFNT (75 ohm) T Adapter, Jack to Plug to Jack LTI-A3BTF MFNT LTI-7A3BTFMFNT (75 ohm) 106
N Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount Bulkhead In Series Adaptors...
Section Index Connectors Specifications... 137 Flexible Cable... 139 Semi-Rigid Cable... 145 Panel Mount... 147 Bulkhead... 148 In Series Adaptors... 149 Other Information Assembly Instructions... 176
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
SMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
TNC SERIES Miniature Coaxial Connectors
SERIES Miniature Coaxial Connectors FEATURES connectors, medium sized coaxial connectors with thread coupling, are designed for applications where extreme vibration is encountered.the increased rigidity
Mating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
Cannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
SERIES MCX 50 MICRO MINIATURE CONNECTORS
SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications
SMA - 50 Ohm Connectors
142-0701-621 4 142-0701-626 4 142-0701-631 4 142-0701-636 4 142-0701-701 7 142-0701-706 7 142-1701-011 5 142-1701-016 5 142-1701-031 4 142-1701-036 4 142-1701-041 5 142-1701-046 5 142-1701-121 5 142-1701-126
SMA Series - Crimp Plug and Jack
Plug Features: SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance. These devices offer broadband performance with low reflection. These properties, along
SMA - 50 Ohm Connectors
Alphabetical Index 142-0701-201 4 142-0701-206 4 142-0701-231 4 142-0701-235* 4 142-0701-236 4 142-0701-301 5 142-0701-306 5 142-0701-335* 6 142-0701-421 5 142-0701-426 5 142-0701-491 5 142-0701-496 5
The Custom Interconnect Leader
7-16 Series.354.276.843.811 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: 50 ohms DC to 7 GHz 2,700 volts
SMA SERIES COAXIAL CONNECTORS
General Information Features Part Number Index Applications Coupling types and interface mating dimensions Semi-rigid conformable cable connectors Flexible cable connectors Connectors for modules Bulkhead
The Custom Interconnect Leader
SC Series.337.307.040.003.085.194 MIN FLARE TO MEET GAGE TEST.276 MIN.549.781 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR:
MCX Connectors. Alphabetical Index. Johnson Components P.O. Box 1732 Waseca, MN Fax:
MCX Connectors Alphabetical Index 133-3701-201 3 133-3701-206 3 133-3701-211 3 133-3701-216 3 133-3701-221 3 133-3701-226 3 133-3701-231 4 133-3701-236 4 133-3701-301 5 133-3701-306 5 133-3701-311 5 133-3701-316
INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
Our Most Important Connection is with You. SECTION 3. Board-to-Board: MMBX / SMP-MAX R223 / R222M
SECTION 3 Board-to-Board: MMBX / R223 / R222M Contents MMBX Introduction... 3-4 Interface... 3-5 Characteristics... 3-6 Plugs... 3-7 PCB receptacles... 3-7 to 3-8 Adapters... 3-9 Demo board... 3-10 Panel
Corona 70,000 Ft. Permeability Risetime Degradation (Mated Pair) 2.0 max MH z
NDL Ultraminiature Triaxial Connectors Connector Specifications Interface Dimensions Ø.020 Ø.082 Ø.168 Ø.162 Electrical Specifications Dielectric Center contact to intermediate contact: 1000 Vrms min Withstanding
SMA Connectors Series
SMA Connectors Series Content Page Description.. 2 Interface Dimensions.. 2 Interface Dimensions in mm/inches.. 2 Characteristics. 3 Cable Connectors 4 PCB Connectors 11 Panel Receptacles.. 13 Adapter
SMP / SMP-COM / SMP-MAX series R222
3 SMP / SMP-COM / SMP-MAX series R222 SMP-MAX INTRODUCTION BOARD TO BOARD SOLUTIONS The Best Systems Radiall s engineers work with your engineers allowing us to develop the best competitively priced misalignment
SMP. Description. Compatibility. Content. Interface dimensions (mm/inches) SMP female. Interface dimensions conformable to the following standards:
Description Compatibility HUBER+SUHNER Astrolab connectors provide a robust, proven and fully compatible plug-in solution for applications up to 40 GHz. HUBER+SUHNER Astrolab connectors have been MIL-SPEC
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
Connectors. High Performance to 65 GHz. Applications. PDF Volume 1. Click Here for Table of Contents Click Here for Specifications
SMP/SMPM Applications DELTA ELECTRONICS MANUFACTURING CORP. Connectors High Performance to 65 GHz PDF Volume 1 Click Here for Table of Contents Click Here for Specifications (978) 927-1060 FAX (978) 922-6430
Board-to-Board connections
Board-to-Board connections MBX/MFBX/MMBX connectors Edition 2014/08 Innovative connections Your partner for system solutions The HUBER+SUHNER Group is a leading global supplier of components and systems
OSMP Microminiature Push-On Coaxial Connectors
Introduction Features Intermateable with Gilbert GPO Series Enhanced performance features Simplified ssembly etween Series dapters For OSMP etween Series dapters, see Page 438. OSMP microminiature push-on
Series SMPM-T. Description. Compatibility. Content. Interface dimensions (mm/inches) SMPM-T male (pin contact), smooth bore
Series Description The is the smallest threaded open source connector on the market. Its unique and innovative combination of a MIL- STD-348 SMPM female interface connector together with a retractable
SMA. Precision 26.5GHz Connectors
SMA Precision 26.5GHz Connectors SMA Precision Connectors SMA subminiature connectors are 50 ohm precision connectors initially designed for performance through 18GHz, however the standard interface is
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
Product Performance Specification Mini Coaxial Connector
Product Performance Specification Mini Coaxial Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Coaxial connector and connector system.
N Series Connectors Medium sized connector for high-voltage applications Suited for critical applications and environments Performance to 11 GHz (commercial) and 18 GHz (hi frequency) Intermateable with
ndl-q & ndl-t SerieS CONNECTORS
ndl-q & ndl-t SerieS CONNECTORS TRIAXIAL CONNECTORS Interface Dimensions Mechanical & Environmental Specifications (Ø.168) Temperature Rating Corrosion -65 C to + 165 C MIL-STD-202 Method 101, Test Condition
EN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
SMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data
SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for
Ganged Board to Board SMP Solutions. Catalog. belfuse.com/cinch
Ganged Board to Board SMP Solutions Catalog belfuse.com/cinch SMP CONNECTORS One of the key benefits of the SMP connector interface is its use in high frequency blind-mate applications. The design of the
SMP connectors. the easy connection. Products overview. Applications
Products overview PCB mount SMD mount plug and Centre pin in SMD, BGA or throughhole configurations Surface mount technology plug and Centre pin in SMD, BGA or throughhole configurations Bulkhead mount
In-Series and Between-Series Adapters SMA
Adapters SMA In-Series and Between-Series Adapters SMA If your choice of SMA Adapter is not shown in this section, please refer to the Table below to determine other possible locations. Should you not
2.92mm (SMK) Connectors
2.92mm (SMK) Connectors Catalog belfuse.com/cinch The Johnson 2.92mm Connector provides an excellent solution for demanding applications requiring high frequency transmission. Although similar to the SMA
Applications & Features, Type SSMP When using blind mate connectors in an application, careful consideration has to be given to choosing the right con
SSMP Push-On Connectors & Adapters THE SSMP (Sub-Sub-Miniature-Push-On) is a 1.7 mm connector, using solid dielectric interface. The connector is 70% of the size of the SMP and therefore allows even higher
SECTION 7 SMA/SMA-COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 7 /COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents BMA Introduction... 74 Characteristics... 75 Plugs... 76 Jacks... 77 to 78 Receptacles...78
CONTENTS. Center Contact Configuration. Specifications, Materials etc Receptacles. Plug Receptacles Adapters. Convertible Adapters
CONTENTS Center Contact Configuration Specifications, Materials etc. Receptacles Plug Receptacles Adapters Convertible Adapters Connectors for Semi-Rigid Cable Connectors for Flexible Cable 3 4 5-9 10-11
Product Performance Specifications QuadraPaddle Connector
Product Performance Specifications QuadraPaddle Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the QuadraPaddle Connector and connector system.
GMS Interconnect Series Product Information
GMS Interconnect Series Product Information Microwave Products Product Features: Frequency range: DC up to 23 GHz, Force to engage/disengage: 10 ounces min./2.5 pounds max., Male connectors have full self-centering
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
Series 3402 lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz
lightning EMP protectors Gas discharge tube (GDT) technology up to 2.5 GHz Description HUBER+SUHNER gas discharge tube protectors make the best of the traditional spark gap protection principle for general
TXC ULTRA-MINIATURE COAXIAL CONNECTORS. Ultra-Miniature Coaxial Connectors. Features. Materials/Finish. Specifications
ULTRA-MINIATURE COAXIAL CONNECTORS TXC Ultra-Miniature Coaxial Connectors Features 1: Ultraminiaturization provided by using hermetic beads. 2: The low profile and narrow flange leads to high density mounting.
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-553/3F w/amendment 8 July 7 SUPERSEDING MIL-DTL-553/3F May 6 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, 3 thru CONTACT POSITIONS,
SECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
Miniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
Product Specification AMP Connector USB Consortium, Plug & Receptacle. Lead Free Version
Product Specification 108-60034 AMP Connector USB Consortium, Plug & Receptacle Lead Free Version 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
FISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
Product Performance Specification Mini Power Connector
Product Performance Specification Mini Power Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Power Connector and connector system.
N-50 N-50. Technical Data. Microminiature Coaxial Connector. Material Data. Interface Dimensions. Plug (Male) Jack (Female) Material Female.
N0 N0 Microminiature Coaxial Connector Technical Data Description KJCOMTECH N connectors are available in both 7 and 0 impedance. The highest possible frequency is 8GHz accord ing to the connector type.
Series 3400 lightning EMP protectors Quarter-wave stub technology
Series 3400 lightning EMP protectors Quarter-wave stub technology Description HUBER+SUHNER quarter-wave lightning EMP protectors offer the best lightning protection available in the market, as they form
Electrical Test voltage (Vrms) Service sea level at m M I II
Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
Accessories. SMA Terminator Plug. SMA Terminator Jack. BNC Terminator Plug. BNC Terminator Jack
Terminators SMA Terminator Plug Gold Plated Brass Nickel Plated Brass LTI-TRM-SAMGT (50 ohm) LTI-TRM-SAMNT (50 ohm) SMA Terminator Jack Gold Plated Brass Nickel Plated Brass LTI-TRM-SAFGT (50 ohm) LTI-TRM-SAFNT
Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
RTX series EN
RTX series EN3716 10 CONTENTS RTX series Page RTX series Introduction... 10-4 Applications... 10-4 Product overview... 10-5 Technical characteristics... 10-6 & 10-7 How to order connectors... 10-8 Dimensions
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
Advance Concept Release for. Initial Pre-Production Sampling Only. Device Bay Connector System
Advance Concept Release for Initial Pre-Production Sampling Only R Device Bay Connector System Molex Device Bay Interconnection System Simplifying PC & Peripheral Installation and Upgrades Driven by customers
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
Dura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: MINI SAS Connectors Product Specification G40 Series 0.80mm Pitch, Cable End and Board Mount Revisions Control Rev. ECN
Amphenol High Density HDB 3 /HSB 3 Connectors
Amphenol HDB 3 /HSB 3 Connectors TABLE OF CONTENTS Amphenol HDB 3 and HSB Connectors 3 Table of Contents..............................45 Introduction - Features, Options, Performance...............................
USB. Amphenol UNIVERSAL SERIAL BUS CONNECTORS
Amphenol USB UNIVERSAL SERIAL BUS CONNECTORS S E R I E S DESCRIPTION The Amphenol UE27 and UE28 Series is a complete RoHS compliant interconnect solution designed in accordance with Universal Serial Bus
PRODUCT SPECIFICATION
RECEPTACLE 1.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME
8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
D-SUBMINIATURE (D-SUB) ECONOMY RANGE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE (D-SUB) OVERVIEW FCI s D-Subminiature (D-Sub) connectors are part of an industry standard for applications requiring robust and reliable connectors. These proven
Modular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
fischer connectors 4032 Series HIGH-PERFORMANCE IN A VERSATILE PACKAGE MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION INSTRUMENTATION Edition 1.
fischer connectors 4032 Series Plastic connectors Edition 1.2 MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION HIGH-PERFORMANCE IN A VERSATILE PACKAGE INSTRUMENTATION PERFECT PACKAGE www.fischerconnectors.com
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
Ultra-Small Surface Mount Coaxial Connectors mm Mated Height
All non- products have been discontinued, or will be discontinued soon. the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Ultra-Small
Datamate High-Reliability Connectors
Datamate High-Reliability Connectors Industry recognised, British Standard approved Datamate is the field-proven high-reliability range of choice for many industries. Approved to British Standard 9525-F0033
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
ATP SERIES ATP Series
ATP SERIES ATP Series 87 ATP Series Overview ATP Series connectors are designed as a high-performance, cost-effective, thermoplastic solution to be used within the Marine, Heavy Equipment, Agricultural,
VITA 67 Series. Ideal For Blind Mate Applications. Electrical, Mechanical & Environmental Specifications
VITA 67 Series Delta Electronics Manufacturing Corp. introduces 4 position (VITA 67.1) and 8 position (VITA 67.2) RF connector housings designed for 3U and 6U formats within the OpenVPX architecture. Ideal
REFERENCE PLANE Referenzebene
1Series RPC- 2.92 Interface Dimensions Series RPC-2.92 (code 02) D REFERENCE PLANE Referenzebene REFERENCE PLANE Referenzebene D A E B C F F C B E A MALE Stecker FEMALE Kuppler Series RPC-2.92 Male Stecker
MRJR Rugged RJ45 Connector
MRJR Rugged RJ45 Connector Product Specification S6055C Rev 1.6 MRJR-3461-0F Shown 6 Position RJ11, Vertical PCB Tail MRJR-5381-01 Shown 8 Position RJ45, MRJ/MRJR PCB Options MRJR-5481-0C Shown 8 Position
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
Introduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
BMA. 1. Applications & Features, Specifications & Interface Dimensions 2. Connectors of Type BMA 3. Adapters to BMA
CONTENT BMA INTRODUCTION to CONNECTORS & ADAPTERS Page 9 7/16 Page 15 N BMA Page 45 SBX SBY Page 61 Page 85 1. Applications & Features, Specifications & Interface Dimensions 2. Connectors of Type BMA 37
HS-Lok Connector. Range Overview IP 68. Receptacle to Overmolded with Cable. In Line. HS-Lok Connector I Range Overview. Mated. Overmolded with Cable
HS-Lok Connector I Range Overview HS-Lok Connector IP 68 Mated Range Overview Receptacle to Receptacle In Line - Amphenol LTW Technology Co., Ltd. HS-Lok Connector I Specification Specification Identifications
Features / Options. - MP-62 Series
MULTIPIN CONNECTORS Amphenol has an extensive range of circular and rectangular multipin connectors ideally suited to the entertainment industry. Featuring rugged housings and precision made contacts these
PERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE, JAM NUT MOUNTED, HERMETIC SEAL, CLASS 2)
INCH-POUND MIL-PRF-39012/14C 10 August 2016 SUPERSEDING MIL-PRF-39012/14B 18 September 1977 PERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE,
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HIGH POWER CONNECTORS Panel Mounts and Cord Plugs HPC Series Switchcraft
decoupled connectors RF Coax Connectors Product Facts
Decoupled Connectors Product Facts Built-in chip capacitors filter high-frequency noise to panel ground PC board mounting with vertical and standard or low-profile right-angle configurations Cable mount
SSMC Connectors. Microminiature, screw-on mating High performance to 12.4 GHz. General Description
SSMC Connectors Microminiature, screw-on mating High performance to 12.4 GHz General Description Delta SSMC connectors are microminiature, 50Ω impedance connectors with 6-40 threaded coupling. SSMC connectors
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
AXOMACH E-16. High data rate links for faster data transmission. Microwave coaxial cables. Panel mount connector QUASI-FLEX. Cable mount connector 2
AXOMACH High data rate links for faster data transmission AXON proposes AXOMACH, a range of high data rate links composed of low loss microwave coaxial cables and different connector types: AXOMACH Micro-D
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
M-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
triaxial CONtaCts Overview Features
triaxal CONtaCts triaxial CONtaCts Overview Smiths Connectors concentric twinax/triax contacts provide flexibility in the design of high speed data systems. The contacts, including the unique sizes 10
Automotive Camera Module RF Connector POK15 Series
Features 1. Superior locking mechanism Our exclusive locking method keeps the mating part in constant contact with the electric reference plane(top Touch), ensuring high contact stability and reliability.