PQube 3. Power Quality, Energy & Environment Monitoring. New Low-Cost, High-Precision

Transcription

1 Power Sensors Ltd New Low-Cost, High-Precision Power Quality, Energy & Environment Monitoring PQube 3 Power Quality Class A Edition 3 Energy Revenue Grade class 0.2/0.2s Accuracy Additional AC, DC, and Environment Sensor Channels World s Smallest & Most Advanced Power Analyzer LISTED E LISTED E LISTED E PQube 3 Power Analysis

2 General Energy (Revenue Class 0.2/0.2s Accuracy)) Three-phase, single-phase and split-phase monitoring 69~480V L-N, 100~830V 3-ph wye L-L, 100~960V splitphase L-L, 50Hz/60Hz 400Hz*. PTs also supported for higher voltages. 8 current channels for load monitoring. 3 channels with full power and energy. Auto-configuration auto-detects single-phase and multi phase voltage, nominal voltage, nominal frequency. Four analog inputs, one digital input, one relay output. Optional (up to two) environmental probes. Powers from 24 VAC, 24~48VDC, PoE (Power over Ethernet) Powers from 100~240 VAC with optional plug-in module. Optional plug-in module with 30 minute UPS backup power. Data storage on internal 8GB drive. Removable 8GB micro-sd card and USB (optional), with lockable cover for restricted access. Color touch screen display, can be operated with safety gloves on! DIN-rail or optional panel mount. Watts, VA, VARs, True Power Factor, watt-hours, VA-hours, VAR-hours. Calculates kwh every single minute! Bi-directional power* - received and delivered. Peak averages single-cycle, 1-minute, 15-minute, and at user-selected intervals. Daily, weekly, monthly trends; load duration curves. Energy accumulators daily, weekly, monthly. Direct 5 amp current input module. Available with PSL custom ultra-precision 333mV current transformers to meet the accuracy requirements of IEC Class 0.2s and ANSI C12.20 Class 0.2. Power Quality Monitoring Class A Ed 3 Certified Class A IEC Ed 3. High-speed 512-samples-per-cycle recording. PQ disturbance recording with waveform and RMS graphs. Voltage sags, swells and interruptions; over-frequency and under-frequency events, time-triggered snapshots. Voltage THD, current TDD and current THD; voltage and current unbalance; flicker (Pinst, Pst, Plt). Voltage and current harmonics and interharmonics up to the 50th, with statistics. Daily, weekly, and monthly trends (with min/avg/max) Daily cumulative probability, histograms, and more. Automatically generates GIF, CSV, and PQDIF files. Rapid Voltage Changes (RVC). Above and Beyond Class A Waveshape change triggers and recording. 1 Mhz high frequency impulse detection and recording (up to 4Mhz on a single channel). 2kHz-150kHz conducted emissions permanent recording. Process/Environment Monitoring PQube 3 Analog AC or DC and Digital inputs suitable for flow, RPM, fluid, pressure, etc... Programmable Relay output -triggered on events* PQube 3 accepts up to 2 optional Environment Sensors Standard sensor provides temperature and humidity (triggering and recording) plus barometric pressure. Advanced sensor includes shock/vibration, two ports for solar irradiance (W/m2) probe, K-Type thermocouple, etc... Communication Automatic notification after a power quality disturbance or trend generation. Free account provided. Remote configuration, setup, firmware upgrade, etc... Integrated Ethernet port on PQube 3. Direct remote access to built-in web server. Access to the data files through FTP. Real time meters with Modbus-TCP and SNMP (v2c and v3). NTP and SNTP for clock synchronization. GPS (requires receiver module). Local device configuration/data access: 1 USB 2.0 port for data transfer to thumb drives. 2 USB 1.0 ports for Environment Sensors Removable SD card NO SOFTWARE REQUIRED *coming soon Actual Size PQube 3 Rear Terminals (PQube 3-PQ- E08N) PQube 3 Brochure PQube 3 Front Terminals Tel Fax

3 Power Supply Modules PM1/PM2 Power Management modules Powers the PQube 3 in the voltage range from 100V~240VAC 50/60 Hz or 120~370VDC PM2 provides 24VDC output for accessories (up to 5W). Note: PQube 3 powers from 24VAC, 24VDC~48VDC, or PoE (Power over Ethernet) without additional modules UPS1 Power Storage module Configurable time battery backup up to 30 mins allows backup optimization for multiple outage situations Provides backup of optional 24VDC outputs (PM2) Environment and Advanced Environment Sensors ENV1 EnviroSensor TM Monitors ambient temperature, humidity, and barometric pressure Temperature/Humidity event triggers Supports up to 10-meter extension cables Temperature accuracy: Typical: ± 0.5 C Humidity accuracy: Typical: ± 5%RH (20~80% R.H.) PQube 3 connects to Environment Sensors through 2 of its USB connectors ENV2 EnviroSensor TM ENV1 EnviroSensor TM benefits PLUS: 3 axis X-Y-Z accelerometer Interface to 5 amp Output Current Transformers CTI-5A Choose the CTI-5A module to connect up to 4 standard metering / protection / instrumentation Current Transformers,with 5-amp secondaries. Certified to IEC Class 0.2 accuracy: both your PQube 3 and CTI-5A accuracies, combined! Certified to IEC Class A harmonic currents Overload capability: 250 amps for 1 second, <1VA burden GPS Time Synchronization Module MS1-GPS1 Intrinsic resolution 1 microsecond Meets and exceeds the IEC Class A time accuracy requirements Fully electrically isolated & calibrated GPS antenna Tel Fax PQube 3 Brochure 1.4.8

4 Lockable Cap Data access security PQube 3 at a glance Micro SD Slot Expandable storage options USB Port Data backup to thumb drives Touchscreen Display User friendly touchscreen interface Ethernet Port Built-in network connectivity and Power over Ethernet (PoE) Relay Outputs USB Ports For adding ambient temperature, humidity, barometric pressure sensors, etc... 4 Analog Inputs Digital Input 24V AC/24-48VDC Input 8 Current Inputs Ready for current transformers 1 to 6000 Amps PSL Ultra-Precision Calibrated current transformers L1, L2, L3, Neutral, Ground Voltage Inputs Expansion Bus Additional modules (both sides) PQube 3 with plug-in Power Supply and UPS modules PQube 3 Brochure Tel Fax

5 PQube 3 File Formats NO SOFTWARE REQUIRED Your PQube 3 provides data in several useful formats. Events, trends, and statistics as universal.gif images and.csv data files Text, XML and HTML summaries PQDIF files (IEEE standard for power quality data files) Each graph and chart is labeled in your choice of up to two languages (available languages growing). All graphs are generated by your PQube 3, without software, and can be viewed in a browser or opened in any picture viewer. They are included in event notification s as simple.gif file attachments, and can be forwarded to a third party, such as a facility engineer or utility company. NO SOFTWARE REQUIRED The PQube 3 web interface access screen. From here, you can check your PQube status, access meters, view events, and send commands. Each PQube can be labeled with a unique name and location, making it easy to monitor multiple PQubes. Overview of PQube 3 meters screen. Meters refresh every second. Tel Fax PQube 3 Brochure 1.4.8

6 Information at a Glance NO SOFTWARE REQUIRED Load Daily 1 minute voltage trends, load currents, DC channels, environment sensor channels... Temperature Humidity 2kHz-150kHz conducted emissions daily recording Flicker 1 MHz or 4 MHz impulse recording Waveform capture of voltages and currents triggered by events such as dips, swells or transients. PQube 3 Brochure Tel Fax

7 PQube 3 Example Wiring PQube 3 - Example Wiring PQube 3 - Dimensions PQube 3 Dimensions Tel Fax PQube 3 Brochure 1.4.8

8 Power Sensors Ltd LISTED E Our Company: PQube 3 Website: