Outside Plant Fiber and Copper Solutions

Transcription

1 Outside Plant Fiber and Copper Solutions OmniReach FTTP Solutions Outdoor FDH Sealed Fiber Distribution Closure Fiber Cross Connect Passive Optical Splitter Modules Wavelength Division Multiplexer Modules Multiport Service Terminal and Hardened Drop Cables Access Terminals MDU Rapid Fiber System Indoor FDH Fiber Splitter Box (FSB) Outdoor Fiber Distribution Terminals MDU ifdt Indoor Fiber Distribution Terminals CPE Wall Splice Cabinet RealFlex Drop Cables OmniReach FTTN Solutions NCX-1000 Cabinets NCX-1000s Cabinets ComProtect Gas Discharge Tube KRONE Series 2 K HighBand ComProtect Building Entrance Terminals (BET) Building Entrance Terminals

2 Outdoor FDH 3000 ADC s OmniReach FTTX Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability, OmniReach solutions simplify FTTX network installation, maintenance and management from the central office/headend to the outside plant. The OmniReach FDH 3000 is designed to meet and serve the distinct needs of diverse markets and customer segments. The unique design of the FDH 3000 provides for rapid connection between fiber optic cables and passive optical splitters in the outside plant segment of the network, facilitating fast service connection and reconfiguration, simplified network installations and improved installation efficiencies in the field. Features and Benefits Unique swing-out frame design Allows for easy maintenance and access to back of distribution panels and cables In-hub distribution splicing option Incorporates splicing of distribution cables within the cabinet. Three-point latch Provides weather-tight seal Angled bulkhead panels Eliminates 90 bends and assists technician with routing Integrated slack storage spools Allows for storage of excess fiber while providing positive bend radius control Dust-cap friendly parking lot Conveniently stores splitter output ports not in service 144 terminations: up to 64 parking lots; 288 terminations: up to 72 parking lots; 432 terminations: up to 144 parking lots; 864 terminations: up to 288 parking lots Six-inch spacer/riser Included with spacer/riser Included with ground mount cabinets Pole mounting configurations Available with extra small (24-144), small (72-288) and medium (72-432) termination models Re-skinnable casing design Allows replacement of cabinet shell without break in customer service Intelligent design Allows for standardized splitter modules and accessories across all cabinet sizes Common mini Plug-and-Play splitter module with common output length Allows for true Plug-and-Play functionality Supports diverse splitter module configurations 1x32, 2x32, 1x16, 1x64, dual 1x16, 1x8, dual 1x8, 1x4, dual 1x4, 1x2, dual 1x2 Craft friendly splitter module design Easy to insert and remove without affecting adjacent splitters Discrete ground and cable location access Allows for locating wires without entry into the cabinet Extreme temperature tubing Improved performance at high and low temperatures See ADC literature #102496AE 404

3 Outdoor FDH 3000 Extra Small Ground Mount Cabinet ( Fibers) Distribution Fiber Panels Loaded fibers fibers fibers fibers fibers Adapters/Connector Type Singlemode N J SC/UPC SC/APC Number of Splitter Modules* 0 No splitter modules 1 1 splitter module 2 2 splitter modules Splitter Type Loaded 0 No splitters L Dual 1x8 A 1x32 M Dual 1x16 C 1x16 N 1x4 S 1x64 P 2x16 G 2x32 U Dual 1x4 J 1x8 *See page 420 to order individual splitters Catalog Number FD3 - AC Feeder Cable Size 1 12 fiber 2 24 fiber Splitter Style P Mini Plug-and-Play Feeder/Distribution Cable Stub Length B 100 foot Distribution Cable Configuration A H J K B All 72 fiber stubs All 24 fiber stubs All 48 fiber stubs All 96 fiber stubs All 144 fiber stubs Feeder/Distribution Cable Type G J L T Single armor loose tube Dielectric loose tube Armored ribbon Dielectric ribbon All shaded configuration options are lead configurations and have best delivery dates. See ADC literature #102496AE 405

4 Outdoor FDH 3000 Small Ground Mount Cabinet ( Fibers) Distribution Fiber Panels Loaded Catalog Number FD3 - AE fibers fibers fibers fibers Adapters/Connector Type Singlemode N SC/UPC J SC/APC Number of Splitter Modules* 0 No splitter modules 1 1 splitter module 2 2 splitter modules Splitter Type Loaded 0 No splitters L Dual 1x8 A 1x32 M Dual 1x16 C 1x16 N 1x4 S 1x64 P 2x16 G 2x32 U Dual 1x4 J 1x8 *See page 420 to order individual splitters Feeder Cable Size 1 12 fiber 2 24 fiber 4 48 fiber Splitter Style P Mini Plug-and-Play Feeder/Distribution Cable Stub Length B 100 foot Distribution Cable Configuration A B C All 72 fiber stubs All 144 fiber stubs All 216 stubs D All 144 fiber stubs, except (72 fiber stubs) 73+ (144 fiber stubs) G All 288 fiber stubs Feeder/Distribution Cable Type G J L T Single armor loose tube Dielectric loose tube Armored ribbon Dielectric ribbon All shaded configuration options are lead configurations and have best delivery dates. See ADC literature #102496AE 406

5 Outdoor FDH 3000 Medium Ground Mount Cabinet ( Fibers) Distribution Fiber Panels Loaded fibers fibers fibers fibers fibers fibers Adapters/ Connector Type Singlemode N J SC/UPC SC/APC Number of Splitter Modules* 0 No splitter modules 1 1 splitter module 2 2 splitter modules Splitter Type Loaded 0 No splitters L Dual 1x8 A 1x32 M Dual 1x16 C 1x16 N 1x4 S 1x64 P 2x16 G 2x32 U Dual 1x4 J 1x8 *See page 420 to order individual splitters Catalog Number FD3 - AG Feeder Cable Size 1 12 fiber 2 24 fiber 4 48 fiber Splitter Style P Mini Plug-and-Play Feeder/Distribution Cable Stub Length B 100 foot Distribution Cable Configuration A B C All 72 fiber stubs All 144 fiber stubs All 216 fiber stubs D All 144 fiber stubs, except (72 fiber stubs) 73+ (144 fiber stubs) G All 288 fiber stubs Feeder/Distribution Cable Type G J L T Single armor loose tube Dielectric loose tube Armored ribbon Dielectric ribbon All shaded configuration options are lead configurations and have best delivery dates. See ADC literature #102496AE 407

6 Outdoor FDH 3000 Large Ground Mount Cabinet ( Fibers) Catalog Number FD3 - AJ Distribution Fiber Panels Loaded fibers fibers fibers fibers fibers fibers fibers fibers fibers fibers fibers fibers Adapters/Connector Type Singlemode N J SC/UPC SC/APC Number of Splitter Modules* 0 No splitter modules 1 1 splitter module 2 2 splitter modules Splitter Type Loaded 0 No splitters L Dual 1x8 A 1x32 M Dual 1x16 C 1x16 N 1x4 S 1x64 P 2x16 G 2x32 U Dual 1x4 J 1x8 All shaded configuration options are lead configurations and have best delivery dates. Feeder Cable Size 1 12 fiber 2 24 fiber 4 48 fiber 7 72 fiber Splitter Style P Mini Plug-and-Play Feeder/Distribution Cable Stub Length B 100 foot Distribution Cable Configuration A B C All 72 fiber stubs All 144 fiber stubs All 216 fiber stubs D All 144 fiber stubs, except (72 fiber stubs) 73+ (144 fiber stubs) G All 288 fiber stubs Feeder/Distribution Cable Type G J L T Single armor loose tube Dielectric loose tube Armored ribbon Dielectric ribbon * See page 420 to order individual splitters See ADC literature #102496AE 408

7 Sealed Fiber Distribution Closure 3000 ADC s OmniReach FTTX Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability, OmniReach solutions simplify FTTX network installation, maintenance and management from the central office/headend to the outside plant. ADC s OmniReach Sealed Fiber Distribution Closure 3000 is a compact and flexible closure that provides for connections between fiber optic cables and passive optical splitters in the Outside Plant. The closure can be mounted to support aerial, buried and underground applications. It offers a robust, user-friendly and cost-effective solution for connecting feeder and distribution cables via optical splitters in FTTP networks and is distinctive for such applications as rural and brownfield deployments. The unique design of the Sealed Fiber Distribution Closure 3000 supports the needs of discrete and varied deployment options and provides for rapid network installation and service turn-up. Features Extremely Compact/High Capacity Design Accommodates 12 feeder fibers, 96 distribution fibers, and 3 splitter modules in a low profile closure Rigorous Testing and Quality Standards Meets Telcordia GR-771, GR-1209, GR-1221 and GR-326 requirements Superior Performance Unsurpassed reliability makes it ideal for aerial, buried and underground applications Environmental Protection Thermoplastic dome provides UV stabilization, flame retardancy, and chemical and impact resistance Field Proven Hermetically Sealed Closure Provides air/water tight seal Re-Enterable/Reusable Shell No re-entry kits or tools required Mini Plug-and-Play Splitter Module Allows for true Plug-and-Play functionality Supports Diverse Splitter Module Configurations 1x32, 2x32, 1x16, dual 1x16, 1x8, dual 1x8, dual 1x4 Craft Friendly Splitter Module Design Easy to insert and remove without affecting adjacent splitters Diverse Cable Types Accommodates loose tube, ribbon, dielectric and armored cable options Compatible Mounting Kits (sold separately) Allow for easy strand, pole, pedestal and hand-hole installations Flexible Configuration Options Allows for splicing interior to closure or stubbed with OSP cable Product Dimensions Overall enclosure length - 28" (711 mm) x Dome Length - 24" (609 mm) x Enclosure Diameter - 9" (228 mm) See ADC literature #103983AE 409

8 Sealed Fiber Distribution Closure 3000 Ordering Information Description Catalog Number Pole/ Wall Mount Kit FD3S-ACC-P01 Strand Mount Kit FD3S-ACC-S01 F2 Fibers Loaded Fibers Fibers Fibers Fibers* * Only available for stubbed option Connector Type N SCUPC J SCAPC Stub Type* T Ribbon Dielectric L Ribbon Armored G Single Armored Loose Tube J Dielectric Loose Tube P Stranded Pigtails R Ribbon Pigtails * Input and output stub Splitter Type Loaded A 1x32 standard C 1x16 standard G 2x32 standard power J 1x8 standard L Dual 1x8 standard M Dual 1x16 standard Catalog Number FD3S Catalog Number FPS-MPP 2 F1 Cable Stub Length* 0 Pigtailed - 2m pigtails A 25' Cable B 100' Cable * Standard 12 fiber size Input Type P Plug-and-Play 0 No input/no splitter chassis F2 Cable Stub Length 0 Pigtailed - 2m pigtails A 25' Cable Output Connector Style N SC ultra polish J SC angled polish Input Connector Style N SC ultra polish J SC angled polish N 1x4 standard P 2x16 standard R Dual 2x16 standard U Dual 1x4 standard W 1x2 standard See ADC literature #103983AE. 410

9 Fiber Cross Connect 3000 ADC s OmniReach FTTX Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability, OmniReach solutions simplify FTTX network installation, maintenance and management from the central office/headend to the outside plant. The OmniReach Fiber Cross Connect 3000 is designed to meet and serve the distinct needs of diverse markets and customer segments. The unique design of the Fiber Cross Connect 3000 provides for a rapid connection, facilitating fast service connection and reconfiguration, simplified network installations and improved installation efficiencies in the field. Unique Design to Meet Diverse Customer Requirements Craft Friendly to support both low and highdensity applications, different network system designs, and diverse installation environments Flexible and Modular Standardized modules and accessories for all Fiber Cross Connect 3000 cabinets Easy to Order Streamlined configurations simplify the ordering process Incorporates ADC Quality and Innovation ADC is a high quality, industry-leading brand you can rely on to future-proof your network, with a complete portfolio of FTTX products and services to ensure seamless deployment and maintenance over the life of the network The Fiber Cross Connect 3000 incorporates four time-tested elements that have long impacted reliability, flexibility and operational costs within the central office/headend: Bend radius protection Intuitive cable routing Easy fiber/connector access Physical protection See ADC literature #104002AE 411

10 Fiber Cross Connect 3000 Features and Benefits Three cabinet sizes Small ( fibers) Medium ( fibers) Large ( fibers) Intelligent design Allows for standardized modules and accessories across all cabinet sizes Unique swing-out frame design Allows for easy maintenance and access to back of modules and cables Features discrete ground and cable location access Allows for locating wires without entry into the cabinets Integrated slack storage spools Allows for storage of excess fiber while providing positive bend radius control Angled bulkhead panels Eliminates 90 bends and assists technician with routing Pole mounting option Available with small and medium termination models Three-point latch Provides weather-tight seal Six-inch pad mount skirt Included with all cabinets Hand hole options Available in polymer-concrete NEMA-4 Design Provides heavy duty protection from wind, rain and other contaminants Accessible with standard 216B tool Offers flexible security options, including pad lock provisions See ADC literature #104002AE. 412

11 Fiber Cross Connect 3000 Catalog Number F3X- Cabinet Size Cable 6 Type E 288 Cabinet 30"(H) x 27"(W) x 18"(D) G 432 Cabinet 41"(H) x 27"(W) x 18"(D) J 864 Cabinet 48"(H) x 46"(W) x 22"(D) Distribution Fiber Count Singlemode Fiber Distribution Fiber Distribution Fiber Distribution Fiber Distribution Fiber Distribution Fiber Distribution Fiber Distribution Fiber Distribution Fiber Distribution Fiber Distribution Fiber Distribution Fiber Distribution Adapter Style N SC/UPC J SC/APC Cable Configuration J Dielectric Loose Tube G Single Armor Loose Tube T Dielectric Ribbon L Single Armor Ribbon Cable Length B 100 foot E 300 foot G 500 foot Cable 1 type A 72 Fiber Distribution B 144 Fiber Distribution D 216 Fiber Distribution 0 No Cable A 72 Fiber Distribution B 144 Fiber Distribution D 216 Fiber Distribution E 288 Fiber Distribution Cable 5 Type 0 No Cable A 72 Fiber Distribution B 144 Fiber Distribution D 216 Fiber Distribution E 288 Fiber Distribution Cable 4 type 0 No Cable A 72 Fiber Distribution B 144 Fiber Distribution D 216 Fiber Distribution E 288 Fiber Distribution Cable 3 Type 0 No Cable A 72 Fiber Distribution B 144 Fiber Distribution D 216 Fiber Distribution E 288 Fiber Distribution Cable 2 Type O No Cable A 72 Fiber Distribution B 144 Fiber Distribution D 216 Fiber Distribution E 288 Fiber Distribution E 288 Fiber Distribution See ADC literature #104002AE. 413

12 Passive Optical Splitter Modules Mini Plug-and-Play Splitter Modules The FDH 3000 utilizes a Mini Plug-and-Play Splitter Module which is common to all of the cabinets and features a common output length. This module allows for true Plug-and-Play functionality. Standardized splitter modules for all cabinet sizes Features bend-optimized fiber and ruggedized extreme temperature cabling rated for material handling in cold temperatures and superior loss performance at 1490 and 1550 nm wavelengths Rated from -55 C to 85 C Allows pass-through of up to 2 fibers per splitter set Splitters are easy to insert and remove without affecting adjacent splitters Reversible dust cap makes test and turn-up easy Wide band pass nm to ensure optical performance for all applications Splitter types supported with specifications Standard Max Loss* Typical Loss* Uniformity Return Loss Directivity PDL 1x2 3.7 db 3.1 db 0.8 db 55 db 55 db 0.3 db 1x4 7.2 db 6.2 db 0.8 db 55 db 60 db 0.2 db 1x db 9.8 db 1.0 db 55 db 60 db 0.2 db 1x db 13.2 db 1.5 db 55 db 60 db 0.3 db 1x db 16.5 db 1.5 db 55 db 60 db 0.3 db 1x db 19.7 db 2.0 db 55 db 60 db 0.4 db 2x db 13.0 db 2.0 db 55 db 60 db 0.4 db 2x db 16.3 db 2.5 db 55 db 60 db 0.4 db * Does not include connector loss Splitter Type A 1x32 S Single 1x64 C 1x16 N 1x4 G 2x32 P 2x16 J 1x8 U Dual 1x4 L Dual 1x8 W 1x2 M Dual 1x16 X Dual 1x2 Catalog Number FPS-MPP 1 Feeder Pass-Thru Feature Output Connector Style N J SC ultra polish SC angled polish Input Connector Style N J SC ultra polish SC angled polish All shaded configuration options are lead configurations and have best delivery dates. Additional options are available, please contact the ADC Technical Assistance Center. See ADC literature #102902AE 414

13 Wavelength Division Multiplexer Modules ADC s OmniReach FTTP Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTP networks. Designed for operational efficiency and scalability, ADC s OmniReach solutions simplify FTTP network installation, maintenance, and management from the central office/headend to the outside plant. Installed in central office/headend fiber panels or frames, or in outside plant enclosures, wavelength division multiplexers (WDMs) enable carriers to mux and demux optical signals to combine analog or digital video with voice and data. There are flexibility advantages for placing the WDM inside the fiber distribution frame lineup as opposed to placing it beside the optical line terminal (OLT) equipment. Features Integrated into traditional ADC fiber management systems Qualified to GR-1209 and GR-1221 Rugged package protects delicate splitters from installer handling or in harsh environments Industry-leading low loss Terminated with GR-326 certified connectors Adapter port modules in a variety of package styles allow adaptation to many applications Removable retainers allow access to rear ports for cleaning Colored retainers and designation labeling help technicians distinguish between ports LGX is a registered trademark of Furukawa Electric North America, Inc. FDF/standard style LGX style MicroVAM style 9" LGX style See ADC literature #103166AE. 415

14 Wavelength Division Multiplexer Modules Ordering Information Description Dimensions (HxWxD) Catalog Number VAMs unloaded chassis 7" vertical mount; accommodates up to 12 modules 3.5" horizontal mount; accommodates up to 4 modules Package Style A D H M FDF/standard style LGX style MicroVam style 9" LGX style Wavelength Plan V 1310/1490 nm and 1550 nm Output (Common) Connector Style N J SC/UPC SC/APC x 482.6/584.2 x mm (7" x 19/23" x 11") 88.9 x x mm (3.50" x 18.76" x 11") Catalog Number VPM - 0 Number of Circuits 1 One 2 Two 6 Six* FVM-VLM19X700-W FVM-LGX19X350-W *Package Style M only Input 2 Connector Style N J Input 1 Connector Style N J SC/UPC SC/APC SC/UPC SC/APC See ADC literature #103166AE. 416

15 Multiport Service Terminal (MST) and Hardened Drop Cables ADC s OmniReach FTTX Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability, OmniReach solutions simplify FTTX network installation, maintenance and management from the central office/headend to the outside plant. The OmniReach Multiport Service Terminal (MST) incorporates hardened connector technology that is designed to withstand the rugged outside plant environment. These uniquely designed hardened connectors are factory-terminated and environmentally sealed for use in optical drop cable deployments. ADC s OmniReach Hardened Cables are environmentally robust to provide a reliable interface for fiber drop cables in the outside plant environment. At the same time, the hardened connector approach dramatically reduces splicing labor requirements. The rugged optical connector is hardened to protect against extreme temperature, moisture, UV, chemical exposure and other harsh conditions typically found in the outside plant. Benefits: Robust environmental performance: Withstands extremes in temperature and conditions Technician-friendly features: Intuitive design for ease of use Decreased installation and incremental maintenance hours: Significant savings Protection: Self-contained unit features hardened connectors for superior durability and reliability in the drop segment of the network Compatibility: Interoperability with industry standard hardened connectors See ADC literature #106021AE. 417

16 Multiport Service Terminal (MST) and Hardened Drop Cables Features: MST Ordering Information Terminal Model 02 2-Port 04 4-Port 06 6-Port 08 8-Port Cable Type A B C Available in 2, 4, 6, and 8 port configurations Flexible mounting options including pole, pedestal, hand hole or strand to support both aerial and below grade applications Tested to meet GR-326, GR-771 and GR standards for robust environmental performance Connection interface utilize factory terminated high-performance SC/APC connectors Hardened adapters provide environmentally secure interface for fiber drops Factory sealed enclosure provides resistance to environment Improved structural design withstands stress and impact Re-enterable enclosure allows for easy technician access for repairs Superior cable and fiber management ensures proper bend radius, prevents cable strain and minimizes kinking Available with dielectric and armored input stub cables in standard lengths Compatible with OptiTap connector system User-friendly packaging allows for easy un-spooling Dielectric Flat Loose Tube Locatable Flat Loose Tube Catalog Number MST - M H U Armored Round Loose Tube Cable Stub Length Feet Feet Feet Feet Feet Feet Feet Feet Standard lengths shown. OptiTap is a registered trademark of Corning Cable Systems Brands, Inc. See ADC literature #106021AE. 418

17 Multiport Service Terminal (MST) and Hardened Drop Cables The 4x3 terminal body is optimized form factor below grade enclosures and hand holes. The 12 port configuration provides superior technician access by providing three rows of four hardened adapters. MST Ordering Information Catalog Number MST - R H U Terminal Model Cable Stub Length 06 6-Port Feet 08 8-Port Feet Port Feet Feet Feet Cable Type Feet A Dielectric Flat Loose Tube Feet B Locatable Flat Loose Tube Feet Standard lengths shown. See ADC literature #106021AE. 419

18 Multiport Service Terminal (MST) and Hardened Drop Cables MST Universal Mounting Brackets ADC s OmniReach MST products have a versatile mounting scheme, allowing all versions of the product to be mounted on a pole, in a pedestal, in a hand hole or to a strand in support of both aerial and below grade applications. All mounting solutions provide a robust, user friendly and costeffective option for delivering fiber optic service drops in FTTX deployments and allow for efficient craft access to connections. ADC s OmniReach MST Universal Mounting Brackets provide a universal mounting solution to support the versatile MST mounting options including pole, pedestal, hand hole and strand applications. These brackets provide for simple, secure, economical and rapid terminal installation in any FTTP deployment. Features: Single bracket compatibility for all mounting schemes Designed to save time and cost, reduce complexity and necessary logistics, and streamline process of mounting MST Snap-in/snap-out installation easily engages/ disengages MST with an audible snap engagement and single latch release making MST readily available for drop cable connections or re-connections Rigid plastic structure using same materials as MST to withstand environmental exposures, including contracting/expanding temperatures Bracket mounted separately minimizing risk of damage to MST Eliminates need for additional bracket inventory and materials in field Stands up under high vibration or stress created by cables placed in the MST Pole Mount Hand Hole Mount Pedestal Mount Strand Mount See ADC literature #106021AE. 420

19 Multiport Service Terminal (MST) and Hardened Drop Cables MST Mounting Accessories Ordering Information Description Universal Mounting Bracket Pole Mount Installation Below Grade Installation Catalog Number 2- and 4-port dielectric cable stub MST MST-UMB and 8-port dielectric cable stub MST / 2- and 4-port armored stub MST MST-UMB x3 Terminal in all Configurations. Strand Mount Bracket ADC 8" Pedestals 1 with Vented Cover with Bell Jar Cover with Vented Cover and Grounding with Bell Jar Cover and Grounding Hand Hole Kits 17"x30" kit with swing arm 24"x36" kit with swing arm MST-UMB-4312 MST-ACC-M02 MST-ACC-W10 MST-ACC-Y10 MST-ACC-W10G MST-ACC-Y10G MST-ACH-C730Y300 MST-ACH-C436Y300 1 Industry standard pedestals with mounting hardware also available. Please contact the ADC Technical Assistance Center at for more information. Aerial Mount Installation See ADC literature #106021AE. 421

20 Multiport Service Terminal (MST) and Hardened Drop Cables Features Benefits Single-fiber, single-mode hardened connector SC APC drop cable assemblies Available with one or both ends connectorized Available standard lengths from 75 to 2000 ft increments (longer assemblies available upon request) Environmentally sealed connector Easy connection to hardened adapters on terminals or closures Arrow on hardened connector shell ensures precise alignment of connector into optical port. Connector can be pulled through 1.25-inch conduit Pulling eye on connector cap is designed for 100 lb. maximum pulling tension Drop cable fully tested to GR-20 and designed to GR-3120 Hardened Drop Cable Ordering Information Connector 1 H Catalog Number FHD - H 1-0 Hardened ASC Connector 2 H Hardened ASC 0 Stub end/none Cable Type A B Dielectric/Flat Locatable/Flat Unit of Measure F Length XXXX Feet Length Standard Lengths (all in feet): Single Ended Cables Double Ended Cables Provide the ultimate Plug-and-Play solution for durable and reliable service connection in the outside plant/drop segment of the network Technician-friendly to greatly simplify installation and maintenance by minimizing splicing required on the distribution side of the network Cost effective solutions that provide for lower overall installed costs throughout the FTTX network See ADC literature #106021AE. 422

21 Multiport Service Terminal (MST) and Hardened Drop Cables Hybrid Cables As the leader in flexible, value added cable management solutions, ADC allows customers to connect the Optical Network Terminal (ONT) to the drop point in multiple ways: OmniReach hardened connectors Spliced cables Standard SC adapters Features Standard connector on one end, stub or hardened connector on other end 18" 2.0 mm breakout from flat drop cable Dielectric toneable cable type Ability to be pulled through smaller conduit sizes (1/2", 3/4") Eliminates need for purchased pigtails and splice tray at ONT Hardened Connector Test Kit ADC s OmniReach Hardened Connector Test Kit is a durable, waterproof and portable bag that houses all the testing and maintenance tools needed for a hardened connector architecture. This kit includes a heavy duty water-resistant carrying case with individual pockets for organizing the test cables, adapters, cleaning kit, technical cleaning and turn-up documentation and the product reference sheet. The rugged case also allows for additional space for carrying other related items and/or test equipment required by the technician. Features Durable, waterproof, and portable bag houses all testing and maintenance tools needed for a hardened connector architecture Test cables and adapters provide transition from hardened to standard SC connector interfaces Cleaning kit for the hardened drop cable/adapter includes a cleaning cassette and 50 hardened adapter cleaning swabs Quick reference ordering guide is included to replenish kit consumables Simplified turn-up and cleaning instructions One-stop test resource for technicians supporting hardened connector architectures User friendly packaging to accommodate additional space/compartments for key testing equipment (i.e. OTDRs, power meters) to support overall technician needs See ADC literature #106021AE. 423

22 Access Terminals 300 ADC s OmniReach FTTX Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability, OmniReach solutions simplify FTTX network installation, maintenance and management from the central office/headend to the outside plant. OmniReach AT 300 Access Terminal Solutions are designed to meet and serve the wide range of customer requirements, providing a robust, user friendly and cost-effective platform for delivering fiber optic service drops in FTTX deployment. Benefits Intelligent Design smart cable management system maximizes performance, prevents damage and allows for future growth. Practical Matches optical node terminal deployment to service request. Future-Proof Supports efficient service deployment, management and technology upgrades. Flexible provides for a wide number of service applications See ADC literature #103800AE. 424

23 Access Terminals 300 8" Non-Metallic Pedestal Features Molded from polypropylene material which is lightweight and non-corrosive The unique, unobtrusive design provides an attractive profile for residential deployments Includes a winter drop access door Provides intuitive, flexible fiber cable management meeting all bend radius specifications Includes grounding for armored cables and towable conduit Ordering Information Uses standard 216B tools Removing the cover is quick and easy a quarter turn with a can wrench releases the top for immediate access. The cover is self locking Cover can be ordered with either bell jar or condensation venting options Meets GR-13 and NEMA 6 requirements Includes a barrier plate which provides protection against ground moisture and rodents Description Catalog Number AT 300 8" Non-Metallic Pedestals Pass-through spliced drop only FAT-YNB0012Y0-000G 2 ADC hardened adapter drops wtih pigtails. HS fusion splice FAT-YNA1200Y0-H02G 4 ADC hardened adapter drops with pigtails. HS fusion splice FAT-YNA1200Y0-H04G 6 ADC hardened adapter drops with pigtails. HS fusion splice FAT-YNA1200Y0-H06G AT 300 8" MST Mounting Pedestal 8" Pedestal with bell jar cover MST-ACC-Y10 8" Pedestal with bell jar cover with grounding MST-ACC-Y10G Additional configurations available. May require minimum order quantity. See ADC literature #103800AE. 425

24 Access Terminals " Non-Metallic Pedestal Features Molded from polypropylene material which is lightweight and non-corrosive The unique, unobtrusive design provides and attractive profile for residential deployments Includes a winter drop access door and drop wire channel standard Provides intuitive, flexible fiber cable management meeting all bend radius specifications Includes grounding for armored cables and towable conduit Uses standard 216B tools Removing the cover is quick and easy a quarter turn with a can wrench releases the top for immediate access. The cover is self locking Cover can be ordered with either bell jar or condensation venting options Meets GR-13 and NEMA 6 requirements Includes a barrier plate which provides protection against ground moisture and rodents Split base Ordering Information Description Catalog Number AT " Non-Metallic Pedestals Pass-through spliced drop only FAT-ZNB0012Y0-000G 4 ADC hardened adapter drops with pigtails. HS fusion splice FAT-ZNA1200Y0-H04G 6 ADC hardened adapter drops with pigtails. HS fusion splice FAT-ZNA1200Y0-H06G 8 ADC hardened adapter drops with pigtails. HS fusion splice FAT-ZNA1200Y0-H08G AT " MST Mounting Pedestal 11" MST Mounting Pedestal MST-ACC-Z11 11" MST Mounting Pedestal with grounding MST-ACC-Z11G *Additional configurations available. May require minimum order quantity. See ADC literature #103800AE. 426

25 OmniReach FTTP Solutions BD4 Metallic Pedestals Industry standard BD4 8" metallic pedestal provides access for splice connectorized drops Value Added Features ADC cable management Pedestal meets industry standards Drop cable clamp Grounding features User friendly for technical field Flexible management of buffer tubes Easy to use strength member clamp Pedestal Cover AE Next Gen Network Solutions Features 28.0 Above Grade Level /09 Security Fastener Base 9.0 Grade Level See ADC literature #103800AE

26 BD4 Metallic Pedestals Ordering Information Description Catalog Number AT 300 BD4 Metallic Pedestal Pass-through spliced drop only FAT-4NB0012Y0-000G 4 ADC hardened adapter drops with pigtails. HS fusion splice FAT-4NA1200Y0-H04G 6 ADC hardened adapter drops with pigtails. HS fusion splice FAT-4NA1200Y0-H06G 8 ADC hardened adapter drops with pigtails. HS fusion splice FAT-4NA1200Y0-H08G *Additional configurations available. May require minimum order quantity. Accessories Ordering Information Description Catalog Number Splice trays 12 fiber AT 300 splice tray FAT-FST-HS01 24 fiber AT 300 splice tray* FAT-FST-HS02 Sealing kits 8" pedestal sealing kit FAT-ACC-SLKT1 12" pedestal sealing kit FAT-ACC-SLKT2 Mounting stakes ADC non-metallic 32" mounting stake MST-ACC-Y32S ProForm/BD 42" mounting stake MST-ACC-J42S ProForm/BD 32" mounting stake MST-ACC-J32S Replacement Moisture Barrier Plate Kit** 8" ADC non-metallic FAT-MBP-Y 11" ADC non-metallic FAT-MBP-Z 8" ProForm FAT-MBP-R 10" ProForm FAT-MBP-J *24 fiber splices with use of 250 micronfibers **Configured for use with ADC AT300 cable management systems See ADC literature #103800AE. 428

27 MDU Rapid Fiber System ADC s new OmniReach Rapid Fiber System is designed to eliminate the unique challenges posed by today s Multiple Dwelling Unit (MDU) buildings, when deploying FTTX networks. MDU buildings present service providers with diverse challenges such as varying cable pathways and distances between logical distribution points, demanding installation schedules and increased quality risks due to splicing. ADC s Rapid Fiber system is designed specifically to assist service providers when deploying MDU optical fiber distribution networks for a variety of architectures and do so in less time and with less total cost on a consistent, high quality basis for every building. ADC s Rapid Fiber system is the ultimate plugand-play solution for delivering fast, durable and reliable service for mid- and high-rise MDUs and is available in multiple configurations to meet the unique requirements of each building. The OmniReach Rapid Fiber system for MDU applications includes the following Fiber-to-the-Premises (FTTP) products: Rapid Indoor Fiber Distribution Hub 3000i Rapid MDU Collector Enclosure Rapid Fiber Distribution Terminal ADC s Rapid Fiber system provides for quick and easy deployment with increased reliability which allows for fast service turn-up, improved network reach and lower overall network operating and maintenance costs. Features and Benefits Reduces overall lead-time and installation process Innovative RapidReel technology Provides flexibility in deployment with various size terminals, cable types and standard cable lengths Utilizes Reduced Bend Radius Fiber Miniaturized cable requires less space for slack storage of excess fiber cable Simplifies ordering and inventory See ADC literature #105783AE. 429

28 MDU Rapid Fiber System ADC s OmniReach Rapid ifdh is an inside plant cabinet which serves as the main distribution and cross-connect point for the MDU. It supports integrated splicing, stubbed cables or integrated MT connectors. The Rapid ifdh is available in a variety of fiber counts accommodating up to 432 living units from a single cabinet. Features and Benefits Configurations include spliced, stubbed and MT connectors All configurations can be either wall or rack mounted with the hardware provided The MT connector configuration eliminates the need for MDU Collector Enclosure Traditional swing-frame design allows superior rear access Designed to meet NEMA-12 requirements Rapid Indoor FDH with built-in MT Rapid Indoor FDH with easy access to built-in MT panel See ADC literature #105783AE 430

29 MDU Rapid Fiber System Catalog Number FD3-M Cabinet Size Feeder Fiber Count K Indoor 72 cabinet A 12 fibers M Indoor 288 cabinet N Indoor 432 cabinet Distribution Fiber Count fiber distribution fiber distribution fiber distribution fiber distribution fiber distribution fiber distribution Adapter Style J SC/APC N SC/UPC No. Splitter Modules 0 No splitters 1 1 splitter 2 2 splitters 4 4 splitters Splitter Type 0 No splitters A 1x32 standard C 1x16 standard G 2x32 standard-power J 1x8 standard L Dual 1x8 standard M Dual 1x16 standard N 1x4 standard P 2x16 standard U Dual 1x4 standard B 24 fibers C 48 fibers D 72 fibers Feeder Cable Length A 100' stub top entry 0 Spliced input Feeder Cable Type A Indoor/outdoor ribbon stub B Riser ribbon stub C Indoor/outdoor loose tube stub D Riser loose tube stub E Stranded pigtails (splice) F Ribbon pigtails (splice) Distribution Cable Configuration A All 72 fiber stubs B All 144 fiber stubs C Highest stub count possible D All 144 fiber stubs, except first Spliced distribution M MT patch Distribution Stub Length A 50' stub 0 No stub Distribution Cable Type R Riser ribbon stub L Riser loose tube stub V Loose tube pigtails 0 Ribbon pigtails M MT connectors See ADC literature #105783AE. 431

30 MDU Rapid Fiber System ADC s OmniReach Rapid MDU Collector Enclosure serves as zoned, intermediate distribution points within the MDU for designs using MT cable stubs instead of splices. Each enclosure is wall mounted within the MDU building and accommodates up to six MT pairs and ships with 72-fiber riser ribbon stubs. Features and Benefits Accommodates up to 6 MT mated pairs Ships with 72-fiber riser ribbon stubs Slotted foam grommet provides easy drop installs while maintaining seal Same mounting pattern as the Fiber Distribution Terminal Fiber Count fiber fiber Cable Type A B C Length A 50' Indoor/outdoor ribbon Riser ribbon Plenum ribbon B 100' Catalog Number MCA-S 1 Rapid MDU Collector Enclosure (open) Enclosure Type A 6 MT indoor enclosure Stubbed End Configuration 0 Stub (no connector) Enclosure End Configuration M 12F MT's with enclosure 0 Stub (no connector) See ADC literature #105783AE. 432

31 MDU Rapid Fiber System ADC s OmniReach Rapid Fiber Distribution Terminal serves as the final distribution point between the ifdh and living unit. It eliminates the need for splice cases and separate cable assemblies by integrating the patent-pending RapidReel cable payout system. The RapidReel system includes a built-in reel enabling quick payoff of up to 500 feet of MT stubbed 12 or 24 count optical fiber cable from a single 6"x 9" wall box. The MT stub is pulled for installation into either the MDU Collector Enclosure or directly to an ifdh equipped with an MT patch panel. After installation the spool flanges can be broken away and the wall box is secured to the wall safely storing the remaining slack cable. Use of factory terminated and tested MT connectors instead of splicing provide a Plugand-Play environment that reduces labor costs and speeds project completion. Features and Benefits Built-in spool allows for easy payoff of MT stub RapidReel technology allows the cable to payoff from the complete stubbed enclosure assembly Patented break-away spool flanges reduce slack storage size to within the enclosures footprint Designed for indoor and outdoor use Utilizes Reduced Bend Radius Fiber Designed to meet NEMA-4 and NEMA 12 requirements Rapid FDT using slider adapter packs Rapid FDT with built-in spool See ADC literature #105783AE. 433

32 MDU Rapid Fiber System Catalog Number RDT- Configuration Stubbed End Configuration S Standard A MT connectors Enclosure Type J 24 fiber Fiber Count Connector Type J SC/APC Splice Trays 0 No tray 2 Heat shrink fusion 3 Mechanical/ribbon Customer Side Pigtails P 3 mm, 12 fiber fanouts with 2 mm outputs 0 No pigtails, no splice trays 0 No connectors Enclosure End Configuration 2 2 mm fanouts 0 No connectors Cable Length ' ' ' ' ' Cable Type B D 3 mm loose tube riser (zipcord for 24 fiber) 3 mm loose tube plenum (zipcord for 24 fiber) See ADC literature #105783AE. 434

33 Indoor FDH 3000 ADC s OmniReach Indoor Fiber Distribution Hub 3000 series cabinets (FDH 3000i) are designed to organize and administer fiber optic cables and passive optical splitters in an inside plant environment typically found at the Multiple Dwelling Unit (MDU). These cabinets are used to connect feeder and distribution cables via optical splitters in a Fiber-to-the-Premises (FTTP) network application. This cabinet provides a vital cross-connect/interconnect interface for optical transmission signals at the MDU. The FDH hardware and components support the architectural flexibility of FTTP allowing fast and reliable interconnection between equipment and cables. The cabinet provides mechanical protection for cables, splices, connectors and passive optical splitters. In addition the product is designed to accommodate a range of fiber counts and support factory installation of pigtails, fanouts, and splitters. The FDH cabinet is designed for front access via a swing frame configuration. The unit accommodates either riser or indoor/outdoor cables via sealed grommet entry. Cables are secured with standard grip clamps to provide required pull out strength. The cabinet provides grounding for metallic members and for the cabinet. Features Integrated splice tray offers flexible splice management for individual or full splice capacity Sealed cabinets protect fibers from dust, water spray, insects and other contaminants Accommodates high-density pre-terminated configurations, typically 72, 144, 288 or 432 fibers Accommodates high-density modular splitter options; 1x16, 1x32, dual 1x8, dual 1x4 Utilizes mini Plug-and-Play splitter modules that allows for true Plug-and-Play functionality; allows for standardized splitter modules and accessories across all cabinet sizes Unique swing out frame design that allows for easy maintenance and access to back of modules and cables Identification and labeling assure product traceability and ease of identification Designed to NEMA-12 Designed to GR-3123 Complete fiber management allows for flexible re-arrangement Cable management and routing limits bend radius and adds strain relief 216-Tool (can wrench), key lock or padlock offers flexible security options Traditional swing frame design allows for superior rear access Rack, wall or pad mountable Bend insensitive fiber on splitter outputs True Plug-and-Play splitter technology See ADC literature #104470AE. 435

34 Indoor FDH 3000 Catalog Number FD3-M Cabinet Size Feeder Fiber Count K Indoor 72 Cabinet A 12 Fibers M Indoor 288 Cabinet N Indoor 432 Cabinet Distribution Fiber Count Fiber Count Fiber Count Fiber Count Fiber Count Fiber Count Fiber Count Adapter Style J SC/APC No. Splitter Modules 0 No Splitters 1 1 Splitter 2 2 Splitters 4 4 Splitters Splitter Type 0 No Splitters A 1x32 standard C 1x16 standard G 2x32 standard - power J 1x8 standard L Dual 1x8 standard M Dual 1x16 standard N 1x4 standard P 2x16 standard U Dual 1x4 standard Feeder Cable Type A C D E F Distribution Cable Configuration A B C D Distribution Stub Length A All 72 Fiber Stubs All 144 Fiber Stubs Highest Stub Possible All 144 Fiber Stubs, except first Spliced Distribution 50 foot Stub 0 No Stub Distribution Cable Type R L V B C Feeder Cable Length A I/O Ribbon 24 Fibers 48 Fibers I/O Loose Tube Riser Loose Tube Stranded Pigtails Ribbon Pigtails Riser Ribbon Stub Riser Loose Tube Stub Loose Tube Pigtails 0 Ribbon Pigtails 100 foot Stub 0 Spliced Input See ADC literature #104470AE 436

35 Fiber Splitter Box (FSB) ADC s new OmniReach Fiber Splitter Box (FSB) enables customers to accelerate their FTTX deployments more effectively and is an ideal solution when deploying FTTX networks in non-residential Multiple Tenant Unit (MTU) and residential Multiple Dwelling Unit (MDU) applications. These wall boxes provide a small footprint for splitting, splicing and terminating and are environmentally rated for indoor or outdoor use. Available in three sizes, each box is equipped with a 12-fiber splice tray allowing for an input splicing option. FSB s accept standard Plug-and-Play (PNP) splitters (same as in the Fiber Distribution Hub 3000 or FDH 3000) and splitters can be easily added after the wall box has been installed. FSB s accommodate 1x4, 1x8, 1x16 and 1x32 splitters; up to 72 fibers. FSB s offer increased efficiency within distinct FTTX network applications. Featuring a compact solution for wall mounting, these boxes provide a significant space savings while maintaining hand access to connectors. The unique swing frame design also allows for easy access to the back section of the wall box. For use in MTU s, as well as garden style, mid-rise and high-rise MDU buildings, FSB s allow for a de-centralized MDU- ONT (Optical Network Termination) architecture and offer an economical solution for MTU/MDU applications where a larger sized FDH is not economical, i.e. strip malls and rural areas. See ADC literature #105947AE. 437

36 Fiber Splitter Box (FSB) FSB-16 - Indoor/Outdoor Enclosure Features and Benefits Accommodates up to 16 ports Rated for indoor or outdoor use Traditional swing frame design allows for access to the back section of the wall box Splitter can be easily installed after wall box install Standard 12-fiber splice tray allows for input splicing option Output pigtails can either be stored internally or routed externally for MDU-ONT connection Accepts standard PNP splitter (same as FDH 3000) See ADC literature #105947AE. 438

37 Fiber Splitter Box (FSB) FSB-32 Indoor Enclosure Features and Benefits Dual hinge design creates separation between rear splitter section and front customer side access Splitters can be easily installed after wall box install allowing for separate purchase Standard 12-fiber splice tray allows for input splicing option Accommodates up to 32 splitter ports for one splitter module Dual hinge provides small footprint on the wall while maintaining excellent hand access to connectors Accepts standard PNP splitter (same as FDH 3000) FSB-72 Outdoor Enclosure Features and Benefits Traditional swing frame design allows for access to the back section of the wall box Splitter can be easily installed after wall box install Standard 12-fiber splice tray allows for input splicing option Accommodates up to 3 PNP splitter modules 72 port capacity with built-in 32-port parking Easily wall mounts to buildings Accepts standard PNP splitter (same as FDH 3000) See ADC literature #105947AE. 439

38 Fiber Splitter Box (FSB) Catalog Number FSB Configuration 11 Key Locks S Connector Type J Standard Enclosure Type Code Description Capacity Size (HxWxD) B Indoor FSB Fiber 8"x13"x5" G Outdoor FSB Fiber 13"x19"x8" H Indr/Outdr FSB Fiber 9"x9"x3.5" SC/APC Splice Tray (Feeder Side) 2 Heat Shrink Fusion 3 Mechanical/Ribbon 0 No Splice Tray Fiber Count (Distribution) Fibers Fibers Fibers Fibers Fibers 6 7 Splitter Type Installed 0 None Installed A C G J L M N P U 1x32 Standard 1x16 Standard 2x32 Standard Power 1x8 Standard Dual 1x8 Standard Dual 1x16 Standard 1x4 Standard 2x16 Standard Dual 1x4 Standard Splitter Qty Installed 0 None 1 One (1) Installed 2 Two (2) Installed 3 Three (3) Installed 10 Feeder Fiber Count 9 8 Feeder Cable Length Feet Feet Feet Feet Feet Feet Cable Type (Feeder Cable) Adapters 0 Adapters Only (No Pigtail for Feeder) Pigtails A C Stubs 0 No Stub 2 2 Fibers 4 4 Fibers 6 6 Fibers 8 8 Fibers S R T V M 0 None (Pad Lock Ready) A Front Lock 1, Rear Lock 1 B Front Lock 1, Rear Lock 2 C D Front Lock 1, No Rear Lock Rear Lock 2, No Front Lock Splice Ribbon Pigtail Assy Splice Pigtails (900 Micron) Ribbon OSP Cable Ribbon IFC Cable Loose Tube OSP Cable Loose Tube IFC Cable 900um IFNR Cable See ADC literature #105947AE. 440

39 Outdoor Fiber Distribution Terminal 24 (ofdt-24) The Outdoor Fiber Distribution Terminal 24 (ofdt-24) is designed to terminate, splice and interconnect fiber optic cables in an outdoor environment. This terminal may be adapted to Fiber-to-The-Premise (FTTP) Multiple Dwelling Unit (MDU) applications and is particularly suited for garden style MDU buildings. The enclosure is mounted to the exterior surface of a dwelling and connects the distribution cable and drops routed to individual living units. The cables meet at a central connector field that includes termination for the distribution cable and parking for the drop cables. The cabinet may be configured with splice trays for splicing the cable to connector pigtails. The ofdt- 24 may be pre-terminated on the distribution side with outside plant cable stubs so that the unit is quickly connected to the plant. The ofdt-24 may also be pre-wired with pigtails on the drop side so that individual drops routed into the unit can be spliced to the connectorized pigtails. The ofdt-24 features a unique swing frame type design that separates the splicing in the rear from the patch access in the front of the swing frame. It allows for easy connector access to the rear connectors for maintenance and cleaning. This approach allows for a single door sealing method, ensuring reliability to withstand longterm outdoor conditions. The unit accommodates a variety of OSP cable types via sealed grommet entry. Cables are secured with standard grip clamps to provide required pull out strength. The enclosure provides grounding for metallic members and for the cabinet. The ofdt-24 product accommodates 6, 12, or 24 living units. Distribution cable fibers are terminated on standard SC/APC adapters that are easily accessible for service connection and maintenance. Drop pigtails are initially terminated on parking adapters adjacent to the distribution termination adapters and staged at the parking positions until the living units request service. Moving the drop pigtails from the parking position to the assigned distribution fiber allows for easy service connections. See ADC literature #103335AE 441

40 Outdoor Fiber Distribution Terminal 24 (ofdt-24) Advantages and Cost Benefits of New ofdt-24 The new ofdt-24 design allows for micro-ducts to enter into the back of the ofdt box. The 8" x 3" oval cut-out on the right side of the back wall allows the installer to locate the ofdt right over the micro-ducts exiting the building. This feature eliminates the need for the transitional NEMA box used to transition from the micro-duct exit location into the ofdt. This new feature offers cost, labor, and aesthetic benefits to the MDU building owners over the current installation method. When not used, the oval cut-out can be covered with the provided gasketed plate. There is also a knock-out hole in the bottom of the cabinet to accommodate every type of installation application. Features and Benefits Accommodates smaller fiber counts; 6-, 12- and 24-fiber Eliminates need for transitional NEMA box that provides for mini-ducts Liquid tight fittings offer cost savings Aesthetic benefits to MDU building owners Supplied with parking, pigtails and splice tray Wall-mount; efficient use of wall space Cable termination and splicing Complete connector access Lockable 216 tool/padlock offers flexible security options Environmental enclosure provides heavy-duty protection from wind, dust, rain, and other contaminants Aluminum welded construction provides strength and resists corrosion Lightweight structure provides for easy installation Cable entrance ports seal cable at entry Cable management and routing limits radius and adds strain relief Standard stub lengths of 100, 300, 500, and 1000 feet NEMA 3R Enclosure Liquid Tight Fitting 1.25 Liquid Tight Conduit New Outdoor FDT Installation Method Liquid Tight Fitting Current Outdoor FDT Installation Method See ADC literature #103335AE 442

41 Outdoor Fiber Distribution Terminal 24 (ofdt-24) Catalog Number FDT- Enclosure Stub Length G ofdt-24 Connector Type J SC/APC Splice Tray 0 No Tray 2 Heat Shrink Fusion 3 Mechanical/Ribbon Fiber Count 06 6 Fiber Fibers Fibers Parking P Parking N No Parking Feet Feet Feet Feet Feet Feet Cable Type Pigtails A C Stubs S R T V Pigtails P X Bare Ribbon Pigtail Assembly Pigtails (Colored) Ribbon OSP w/conn Ribbon IFC w/conn Loose Tube OSP w/conn Loose Tube IFC w/conn Pigtails (2mm) No Pigtails See ADC literature #103335AE. 443

42 Outdoor Fiber Distribution Terminal 48 (ofdt-48) The ADC Outdoor Fiber Distribution Terminal 48F (ofdt-48) is designed to terminate, splice and interconnect fiber optic cables in an outdoor environment. This terminal may be adapted to Fiber-to-The-Premise (FTTP) Multiple Dwelling Unit (MDU) applications by mounting the enclosure to the exterior surface of a dwelling and connecting between the distribution cable and drops routed to individual living units. The ofdt-48 is typically divided into two side-by-side sections with distribution cable routed into one side and drop cable routed into the other side. The cables meet at a central connector field that includes termination for the distribution cable and parking for the drop cables. Each side of the cabinet may be configured with splice trays for splicing the cable to connector pigtails. The ofdt-48 may be pre-terminated on the distribution side with outside plant cable stubs so that the unit is quickly connected to the plant. The ofdt-48 may be pre-wired with pigtails on the drop side so that individual drops routed into the unit can be spliced to the connectorized pigtails. The unit accommodates a variety of OSP cable types via sealed grommet entry. Cables are secured with standard grip clamps to provide required pull out strength. The enclosure provides grounding for metallic members and for the cabinet. See ADC literature #103333AE 444

43 Outdoor Fiber Distribution Terminal 48 (ofdt-48) Sizes The ofdt-48 product accommodates up to 48 living units. Distribution cable fibers are terminated on standard SC/APC adapters that are easily accessible for service connection and maintenance. Drop pigtails are initially terminated on parking adapters adjacent to the distribution termination adapters and staged at the parking positions until the living units request service. Moving the drop pigtails from the parking position to the assigned distribution fiber easily makes service connections. Mounting Applications All units are configurable for a variety of mounting arrangements including wall, pole and pedestal mounting. Each unit is provided nominally with a wall mount bracket. Optional pole-mount brackets and pedestals may be ordered separately. Special Features These heavy gauge aluminum enclosures provide the necessary protection against rain, wind, dust, rodents and other environmental contaminants while remaining lightweight for easy installation. The aluminum construction with heavy powder coat finish also provides for corrosion resistance. Features and Benefits Environmental enclosure provides heavyduty protection from wind, rain, and other contaminants Aluminum welded construction provides strength and resists corrosion Flexible design accommodates 24 and 48 fibers including termination and parking Lightweight structure provides for easy installation Lockable tool or padlock offers flexible security options Cable entrance ports seal cable at entry Cable management and routing limits radius and adds strain relief See ADC literature #103333AE 445

44 Outdoor Fiber Distribution Terminal 48 (ofdt-48) Catalog Number FDT- Pigtails Enclosure F ofdt-48 Connector Type J SC/APC Splice Tray 0 No Tray 2 Heat Shrink Fusion 3 Mechanical/Ribbon Fiber Count Fibers Fibers Parking P Parking N No Parking P Pigtails (2mm) X No Pigtails Cable Type Pigtails A Bare Ribbon Pigtail Assembly C Pigtails (Colored) Stubs S Ribbon OSP w/conn R Ribbon IFC w/conn T Loose Tube OSP w/conn V Loose Tube IFC w/conn Stub Length Feet Feet Feet Feet Feet Feet See ADC literature #103333AE. 446

45 MDU ifdt The Indoor Fiber Distribution Terminal (ifdt) provides Multiple Dwelling Unit (MDU) applications with a compact and secure family of enclosures for connecting fiber cables at MDUs. The ifdt products utilize a rugged double-hinged design that effectively isolates the splicing and cable termination in the rear compartment from the jumper interconnection in the front compartment. Separating the cable splicing and termination into a layered configuration provides a space efficient and craft friendly interface unit. The layered ifdt staggered interconnection field provides ease of access to all connections. The ifdt enclosure provides standard SC/APC connections and parking adapters for locating the connectorized pigtails prior to deployment. Features Designed to splice and terminate 6-, 12-, 24- and 48-fibers Integrated splice tray offers flexible splice management for individual or mass splicing Sealed enclosure protects fibers from dust, water spray, insects and other contaminants Dual-hinged design ensures separation of owner/client network segments NEMA-12 Rated Tested to GR-2898-CORE Front and rear layer maximizes wall space utilization for both splicing and interconnect Robust steel construction protects fibers against damage and ensures network reliability Slotted cable entrance ports allow for rapid cable installation and pass-through capability Cable management and routing limits bend radius and adds strain relief 216-Tool (can wrench), key lock or padlock offers flexible security options 6-Port 24-Port 12-Port 48-Port See ADC literature #103266AE. 447

46 MDU ifdt Catalog Number FDT- Stub Length Enclosure Type Max Capacity Code Desc. w/prkg w/o Prkg A ifdt-6/12 6-Fiber 12-Fiber B ifdt-12/24 12-Fiber 24-Fiber C ifdt-24/48 24-Fiber 48-Fiber E ifdt-48/96 48-Fiber 96-Fiber Connector Type J SC/APC Splice Tray 0 No Tray 2 Heat Shrink Fusion 3 Mechanical/Ribbon Fiber Count 06 6 Fiber Fibers Fibers Fibers Fibers Fibers Feet Feet Feet Feet Feet Feet Cable Type Pigtails A Bare Rbn Pgtl Assy C Pigtails (Colored) Stubs S Ribbon OSP w/conn R Ribbon IFC w/conn T Loose Tube OSP w/conn V Loose Tube IFC w/conn Pigtails P Pigtails (2mm) X No Pigtails Parking P Parking N No Parking See ADC literature #103266AE. 448

47 Indoor Fiber Distribution Terminals - CPE Product Description The ADC Indoor Fiber Distribution Terminal (ifdt) series provides Customer Premises Equipment applications with a compact and secure family of enclosures for connecting fiber cables within building entrance locations, communication closets, computer rooms and other indoor environments. The ifdt products utilize a rugged double-hinged design that effectively isolates the splicing and cable termination in the rear compartment from the jumper interconnection in the front compartment. Separating the cable splicing and termination function from the interconnection function allows the unit to be used as a dual-access product with secure lockable access provided for each compartment. The layered ifdt and staggered interconnection field provides ease of access to all connections. The ifdt enclosure provides mounting positions for standard APLH modular adapter panels(12- packs, 8-packs, 6-packs, etc.) accommodating any industry standard adapters. Sizes The ifdt products are designed to splice and terminate fibers in a range of sizes including 6, 12, 24, 48, 72, and 96 fibers. Mounting Applications The ADC ifdt Series cabinets are for indoor wall mount applications and are designed to NEMA-12 rating. The dual hinged design allows complete front and rear access. The two secure doors are locked with a standard can wrench tool and may optionally be secured with a standard pad-lock. The unit may also be configured for single lock entry thus allowing the products to be used for single access applications. See ADC literature #103562AE. 449

48 Indoor Fiber Distribution Terminals - CPE Fiber Management The enclosures accommodate optical component modules allowing the unit to house splitters, WDMs, filters and other optical components. For splicing applications, ADC s splice trays can be installed to support either individual fusion splicing or mass fusion splicing. The units provide sealed cable ports for cables and interconnection cables and gaskets to protect against dust and water spray. The units can also be configured with a standard cable grip kit to provide strain relief for incoming fiber cables. The splice compartment provides ample space for storing loose-tube, ribbon or individual fiber slack. Features 12-Packs provide for high-density terminations and conserve wall space. Integrated splice tray offers flexible splice management for individual or mass splicing. Sealed enclosure protect fibers from dust, water spray, insects and other contaminants. Dual-hinged design ensures separation of owner/client network segments. Designed to NEMA-12 Designed to GR-2898-CORE Front and rear layer maximizes wall space utilization for both splicing and interconnect. Robust steel construction protects fibers against damage and ensures network reliability. Slotted cable entrance ports allow for rapid cable installation and pass-through capability. Cable management and routing limits bend radius and adds strain relief. 216-Tool (can wrench), key lock or padlock offers flexible security options. See ADC literature #103562AE. 450

49 Indoor Fiber Distribution Terminals - CPE Catalog Number FDT- N X Enclosure Type/Capacity A ifdt Fiber B ifdt Fiber C ifdt Fiber D ifdt Fiber E ifdt Fiber Connector Type N SC/UPC J SC/APC Splice Tray 0 No Tray 2 Heat Shrink Fusion 3 Mechanical/Ribbon Fiber Count 06 6 Fiber Fiber Fiber Fiber Fiber Fiber Stub Length Feet Feet Feet Feet Feet Feet Cable Type Pigtails A Bare ribbon pigtail assy C Pigtails (Colored) Stubs S Ribbon OSP w/conn R Ribbon IFC w/conn T Loose Tube OSP w/conn V Loose Tube IFC w/conn See ADC literature #103562AE. 451

50 Wall Splice Cabinet ADC s new OmniReach Wall Splice Cabinets (WSC) provide a versatile splicing solution when deploying FTTX networks in today s Multiple Dwelling Unit (MDU) buildings. The cabinets are available in indoor and indoor/outdoor configurations making them suitable for splicing requirements anywhere in an MDU architecture. The WSC also offers slack storage and is easily accessible with its wall-mount design. WSC-24 Features Rated for indoor use Accommodates up to (2) 12-fiber splice trays Built-in slack storage around splice trays Flexible cable entry location with its 4 cable entry port design Top and bottom cable entry ports allow for pass through splicing capability Standard 216 tool access Padlock and/or key lock security option WSC-48 Features Rated for indoor and outdoor use Accommodates up to (4) 12-fiber splice trays Built-in slack storage around splice trays Standard 216 tool access Padlock security One part number can accommodate indoor or outdoor demand See ADC literature #106425AE 452

51 Wall Splice Cabinet Catalog Number WSC-S 0 1 Enclosure Type Key Locks B Indoor WSC-24 (24-fiber) H Indoor/Outdoor WSC-48 (48-fiber) Splice Tray (provider side) 2 Heat Shrink Fusion 3 Mechanical/Ribbon 0 No Splice Tray 0 None (Padlock Ready) E Front Lock 1 Fiber Count Fibers Fibers Fibers Fibers See ADC literature #106425AE 453

52 RealFlex MDU Drop Cables ADC s new RealFlex MDU Drop Cables are an ideal solution for the unique challenges encountered when deploying FTTX networks in today s Multiple Dwelling Unit or MDU buildings. RealFlex MDU Drop Cables are offered in Indoor/ Outdoor, Riser and Plenum cable types making them suitable for all types of MDU structures. RealFlex MDU Drop Cables allow for a bend radius as small as 7.5 mm without changing attenuation characteristics of the cable and improve insertion loss (IL) performance for 90 degree bend locations. With the average MDU installation including as many as seven 90 degree turns, this new fiber greatly reduces the risk to bend induced IL during installation. In addition to the improved bend radius performance, the rugged 3mm cable construction provides the flexibility and durability to withstand the most demanding applications. The rugged 3 mm indoor/outdoor cable can be stapled*, allowing for fast and easy securing of cables to most surfaces. The reduced bend radius glass allows the technician to staple around tight corners without compromising insertion loss performance. ADC s RealFlex MDU Drop Cables provide for quick and easy deployments with increased reliability which allow for fast service turn-up, improved network reach and lower overall network operating and maintenance costs. *ADC approved staplers and staples. Typical Applications: Garden or horizontal; indoor/outdoor cable used to transition from an outdoor fiber distribution terminal to each indoor living unit Mid or high-rise; all three cable types can be used to transfer from an indoor fiber distribution terminal to each individual living unit within a building Indoor/outdoor and riser cables are suitable for all OFNR applications; OFNP applications will require plenum cable See ADC literature #105715AE 454

53 RealFlex MDU Drop Cables Features and Benefits Bend radius as small as 7.5 mm without changing cable characteristics Greatly reduces risk to bend induced insertion loss created during installation Indoor/Outdoor, Plenum and Riser cable options available Rugged 3 mm cable jacket construction 1550 nm Reference Standard Fiber Stapled 3mm RealFlex MDU Drop Cables G.657 Table A and B compliant Two cable configurations available: connectors on both ends or connector on one end Spooling options: end with connector pulled first or end without connector pulled first Ivory cable color helps distinguish cable in the field dbr Reduced Bend Radius Fiber See ADC literature #105715AE 455

54 RealFlex MDU Drop Cables Catalog Number MDC- - Connector 1 Type J N APC SC UPC SC Connector 2 Type J N APC SC UPC SC 0 Stub Number of Fibers 1 One Cable Type (RBR) Reduced Bend Radius F G H RBR Indoor/Outdoor Ivory RBR Plenum Ivory RBR Riser Ivory Spool Option 0 No Spool J Standard Spool F Spooled Connector First L Spooled Connector Last Standard Cable Measurement F Feet M Meters Standard Cable Lengths See ADC literature #105715AE 456

55 RealFlex 5 Drop Cables ADC s new RealFlex Drop Cables are an ideal solution for the unique challenges encountered in the diversity of multi-tenant unit (MTU) and multi-dwelling unit (MDU) FTTX deployments. RealFlex Drop Cables allow for a bend radius as small as 7.5 mm without changing attenuation characteristics of the cable and improve insertion loss (IL) performance for 90 degree bend locations. With the average MTU or MDU installation including as many as seven 90 degree turns, this new cable greatly reduces the risk to bend induced IL during installation. In addition to the improved bend radius performance, the rugged cable construction provides the flexibility and durability to withstand the most demanding applications. The rugged indoor/outdoor cables can also be stapled *, allowing for fast and easy securing of cables to most surfaces. The reduced bend radius glass allows the technician to staple around tight corners without compromising insertion loss performance. * ADC approved staplers and staples. ADC s RealFlex 5 Drop Cables use 5.0 mm cable with Reduced Bend Radius fiber for optimal performance in the most constraining installation environments and hardened connectors for fast service turn-up. The hardened connectors are environmentally sealed and terminated in the factory to produce the highest reliability standards. Multiple dwelling units and commercial business applications are ideal environments for this indoor/outdoor reduced bend radius hardened drop cable. Features and Benefits Bend radius as small as 7.5 mm without changing cable characteristics Greatly reduces risk to bend induced insertion loss created during installation Rugged 5.0mm indoor/outdoor cable jacket is composed of Low-Smoke Zero-Halogen rated materials and incorporates water swellable yarns Hardened connector option fully compatible with OptiTap connector system OptiTap is a registered trademark of Corning Cable Systems Brands, Inc. See ADC literature #106501AE. 457

56 RealFlex 5 RealFlex HD knot Ordering Information Connector Type H Hardened Connector Connector Type 0 None - Stub End H Hardened Connector Catalog Number FHD- 1K-0 M RealFlex HD 90 degree bend Length Meters Meters Meters Meters Meters See ADC literature #106501AE 458

57 OmniReach FTTN Solutions NCX-1000: Large Cabinet for FTTN Broadband Service Delivery The NCX-1000 is a passive fiber-to-the node (FTTN) service delivery cabinet that is easily placed in the feeder or distribution plant to support any re-sectionalizing or broadband overbuild application. It is typically installed with an adjunct DSLAM cabinet or remote terminal that houses a broadband DSLAM. The compact cabinet is designed for FTTN applications where re-sectionalizing the network requires either a new cross-connect interface with a 1:2 ratio of feeder to distribution pairs or for 1:1 ratios where ADC s patented Distribution Intercept (DI) service delivery solution is used. The NCX-1000 family of cabinets supports up to 900 feeder circuits and 1800 distribution circuits with 432 DSLAM input and output ports in a non-protected FDI configuration. Options for non-protected and protected DSLAM circuits utilizing ComProtect high performance protection are available. ADC s OmniReach FTTX Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability, OmniReach solutions simplify FTTX network installation, maintenance and management from the central office/headend to the outside plant. Features Drop down panels offer easy access to OSP cable stubs for splicing into DSLAMs and network FDI (1:2) and patented Distribution Intercept (DI) (1:1) configurations available Works with existing F1/F2 cross box or can replace it Able to groom all existing xdsl shelves into a single format and provide cross-connect capability in addition to pair-bonding Supports in-cabinet circuit protection Meets GR-487 requirements See ADC literature #105052AE 459

58 OmniReach FTTN Solutions NCX-1000: Large Cabinet for FTTN Broadband Service Delivery Ordering Information Description Catalog Number NCX-1000 Cabinet FDI (1:2) Protected Configuration KCE-FJA600X Equipped with 600 feeder pairs and 1200 distribution pairs with 864 DSLAM ports in/out protected. Includes Insertion Tool and LSA-PLUS Series 2 test cord. Order ComProtect protection modules separately. NCX-1000 Cabinet FDI (1:2) Non-Protected Configuration KCE-FJA900X1800-2N Equipped with 900 feeder pairs and 1800 distribution pairs with 432 DSLAM ports in/out non-protected. Used for applications where adjunct DSLAM cabinet is equipped with protection for DSLAM input and output circuits. Includes Insertion Tool and LSA-PLUS Series 2 test cord. NCX-1000 Cabinet FDI (1:2) Non-Protected Configuration KCE-FJA900X1350-3N Equipped with 900 feeder pairs and 1350 distribution pairs with 648 DSLAM ports in/out non-protected. Used for applications where adjunct DSLAM cabinet is equipped with protection for DSLAM input and output circuits. Includes Insertion Tool and LSA-PLUS Series 2 test cord. NCX-1000 Cabinet DI (1:1) Non-Protected Configuration KCE-DJA1600-1N Equipped with 1600 OSP Intercept pairs in/out and 216 DSLAM ports in/out. Can accommodate up to 864 DSLAM ports. Additional block assemblies ordered separately. Used for applications where adjunct DSLAM cabinet is equipped with protection for DSLAM input and output circuits. Includes Insertion Tool and LSA- PLUS Series 2 test cord and green activation plugs. Accessories Insertion Tool Look-both-ways test cord for Series LSA-PLUS Series 2 green activation plugs for xdsl activation (for KCE-DJA1600-1N) Quantity: 1 (order in multiples of 100) Pad Mount Frame for NCX-1000 Large Cabinet ACE-304PMF ComProtect solid state overvoltage protection module for applications up to ADSL2+. Two protectors required per circuit. Black housing. ComProtect gas discharge tube overvoltage protection module PRO B for applications up to VDSL2. Two protectors required per circuit. See ADC literature #105052AE 460

59 OmniReach FTTN Solutions NCX-1000: Small and Medium Cabinets for FTTN Broadband Service Delivery The NCX-1000 service delivery cabinet integrates ADC s patented Distribution Intercept (DI) broadband service delivery cross-connect inside a compact pad or pole mounted cabinet specifically designed for today s new breed of hardened (brick) DSLAMs. The NCX-1000 family of cabinets supports from 48 to 144 DSLAM ports and up to 600 OSP Intercept pairs in/out. It allows strategic placement deep in the network to achieve required loop lengths for optimum bandwidth on xdsl services. Simple, straight splicing to the outside plant cable is all that is needed to begin turning up customers from a central location. ADC s OmniReach FTTX Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability, OmniReach solutions simplify FTTX network installation, maintenance and management from the central office/headend to the outside plant. Features and Benefits Single cabinet solution houses DSLAMs and DI service delivery cross connect Works with existing crossbox or can replace it Easily splices into the feeder or distribution plant Able to groom all existing xdsl shelves into a single format and provide cross-connect capability in addition to pair-bonding Provides a consistent interface for technicians Can be deployed in feeder or distribution outside plant cable, the most flexible solution available Fastest to deploy, only straight splicing activities to OSP required Unique look-both-ways test capability without lifting wires reduces time for technicians to isolate network problems Distribution Intercept (DI) offers the most streamlined approach to xdsl delivery, green activation plugs offer visual indication of working broadband customers Preserves investment in existing copper plant See ADC literature #104975AE 461

60 OmniReach FTTN Solutions NCX-1000: Small and Medium Cabinets for FTTN Broadband Service Delivery Ordering Information Description Catalog Number Small Pole-or Pad-Mount Cabinet NCX-10487P00 Distribution intercept service delivery cabinet with 200 pair OSP with MS 2 NCX-10487P00 connectors and 96 DSLAM ports in/out with 710 connectors. Includes Insertion Tool and LSA-PLUS Series 2 green activation plugs. Bracket supports first Adtran Total Access-1148 DSLAM and first 1100F aggregation unit Bracket for second Adtran Total Access-1148 only Pole mount kit for NCX-10487P00 OSP-PMK-100 Pad mount frame for NCX-10487P00 ACE-102PMF NCX-10487P00 split skirt riser 6" for pad mount frame ACE-ACCSPCR06S-102 Medium Pole-or Pad-Mount Cabinet NCX Distribution intercept service delivery cabinet, 1-3 hardened DSLAMs, 144 ports NCX in/out with 710 connectors and 600 OSP intercept in/out pairs with MS 2 connectors. Includes Insertion Tool and LSA-PLUS Series 2 green activation plugs. Bracket supports first Adtran Total Access-1148 DSLAM and first 1100F aggregation unit Bracket for second Adtran Total Access-1148 only Bracket for third Adtran Total Access-1148 and second 1100F aggregation Pole mount kit for NCX OSP-PMK-001 Pad mount frame for NCX ACE-152PMF NCX split skirt riser 6" for pad mount frame ACE-ACCSPCR06S-152 Accessories Insertion Tool Look-both-ways test cord for LSA-PLUS Series 2 blocks LSA-PLUS Series 2 green activation plugs used for xdsl activation Quantity: 1 (order in multiples of 100) See ADC literature #104975AE 462

61 OmniReach FTTN Solutions NCX-1000s Distribution Intercept Cross-Connect for CoolPed Cabinets The NCX-1000s service delivery cross connect is designed for customers who use the Emerson CoolPed cabinet for hardend DSLAM applications. The NCX-1000s utilizes ADC s patented Distribution Intercept (DI) broadband service delivery cross-connect and mounts inside the CoolPed cabinet offering the same streamlined broadband service delivery as found in ADC's family of NCX-1000 cabinets. The NCX- 1000s combined with the CoolPed allows you to strategically place the cabinet anywhere in the network to achieve the required loop lengths for optimum bandwidth. Simple straight splicing to the outside plant cable is all that is needed to begin turning up customers. ADC s OmniReach FTTX Solutions are the industry s first infrastructure solutions designed from the ground up to meet the unique requirements of FTTX networks. Designed for operational efficiency and scalability, OmniReach solutions simplify FTTX network installation, maintenance and management from the central office/headend to the outside plant. Features NCX-1000s and mounting brackets for CoolPed cabinet installation, OSP cable stubs 12' for easy splicing into DSLAMs and network Works with existing feeder/distribution cross box or can replace it Sized from 48 DSLAM ports and 100 OSP intercept pairs to 144 DSLAM ports and 600 OSP intercept pairs Able to groom all existing xdsl shelves into a single format and provide cross-connect capability in addition to pair-bonding Provides a consistent interface for technicians CoolPed is a trademark of Emerson Network Power. See ADC literature #104982AE 463

62 OmniReach FTTN Solutions NCX-1000s Distribution Intercept Cross-Connect for CoolPed Cabinets Ordering Information Description Catalog Number Distribution Intercept Cross Connect for Mounting in CoolPed Cabinet. Includes mounting bracket, Insertion Tool and LSA-PLUS Series 2 green activation plugs. 96 DSLAM ports in/out, 200 OSP intercept pairs NIB N12S 144 DSLAM ports in/out, 600 OSP intercept pairs NIB N12S Accessories Insertion Tool Look-both-ways test cord for LSA-PLUS Series LSA-PLUS Series 2 green plugs for xdsl activation Quantity: 1 (order in multiples of 100) See ADC literature #104982AE 464

63 OmniReach FTTN Solutions ComProtect Gas Discharge Tube: Single-Pair Protectors for Series 2 Switching Blocks ADC's ComProtect 2/1 CP TP280A1 GDT (Gas Discharge Tube) single-pair protection module, when combined with ADC's LSA-PLUS Series 2 connectivity, is a high-density system that increases the pair capacity that can be supported in OSP cabinets. The ComProtect GDT system provides up to a 50% space savings over traditional systems utilizing separate cross-connect and protection fields. By reducing the number of connection points, the ComProtect GDT system improves technician productivity and reduces failure rates. The ComProtect GDT module has been designed for protecting high bandwidth circuits, like VDSL2. Features and Benefits Meets applicable GR-1361-CORE, GR-63- CORE, GR-78-CORE, GR-1252-CORE, and SR-NWT-2759 Telcordia standards Meets the "High-Speed Digital Networks Operating up to 100 MHz" requirements of Telcordia GR-974-CORE Listed to UL 497 Meets NEBS Level 3 compliance Supports VDSL2 transmission Quick VDSL2 migration for upgrading from xdsl2+ circuits by simply changing out solidstate ComProtect to ComProtect GDT Cross-connection and protection in the same footprint Termination Block with integrated protection Provides protection to your FTTN network elements against overvoltage surges ComProtect utilizes LSA-PLUS technology therefore reducing network failure frequency rates. LSA-PLUS technology offers monitoring, look-both-ways testing, without lifting crossconnect jumpers Ordering Information Description Catalog Number ComProtect GDT 2/1 CP TP280A1 Quantity per Pack: Pair Block With 6' 25-Pair Cable Stubs and 710 Connectors 100-Pair Block 6' Stub and 710 Connectors (4) 25-Pair 6 Cable Stubs and 710 Connectors PRO B /06A /06A /06A See ADC literature #104560AE 465

64 OmniReach FTTN Solutions ComProtect Gas Discharge Tube: Single-Pair Protectors for Series 2 Switching Blocks ADC's ComProtect 2/1 CP ASU240A1 solid state single-pair protection modules provide maximum overvoltage protection in a minimum of space. Plugging directly into ADC's LSA-PLUS Series 2 switching blocks, ComProtect products save space and protect valuable, system-critical equipment. Designed for optimum performance integrated, solid-state design enables quick, reliable response Saves space combines protection and crossconnect fields into a single KRONE Series 2 block no additional interconnect terminal blocks required Up to 50% space savings over traditional systems utilizing seperate cross-connect and protection fields Easy to use and maintain when inserted into a Series 2 switching block, the field pair can be isolated from the equipment side by removing the protector and opening the circuit Features and Applications Meets applicable GR-974-CORE, GR-78-CORE and GR-63-CORE standards Meets UL 497 standard for paired conductor communications circuit protection Unique, high-density single-pair design allows pairs to be isolated and easily replaced Both 24- and 26-gauge wire can be used to create a fuse link from the protection field to the OSP network cable Meets all standards for controlled environments including temperature, humidity, office vibration and airborne contaminants Meets all standards for uncontrolled environments including salt-fog, rain, fungus, airborne contaminants and aging. Also meets standards for environmental cycling for impulse and AC surges. Meets GR-63 standards for transport and storage NEBS Level 3 compliant Insertion loss of less than 0.6 db (up to 16 MHz) The ComProtect module supports broadband circuits, such as ADSL2+ Fiber to the Curb Applications Provides a technician-friendly method of connecting and protecting outgoing line powering pairs in ONU (optical network unit) host cabinets. DLC Remote Terminal OSP Pair Applications Compact solution for all OSP pairs leaving DLC cabinets. Saves space in the end chamber by providing cross-connect and protection in one field up to 100% space savings in certain applications. Cabinet Overlay Applications Compact 307 type replacement for protecting inputs and outputs of DSLAM equipment. See ADC literature #104560AE 466

65 OmniReach FTTN Solutions ComProtect Gas Discharge Tube: Single-Pair Protectors for Series 2 Switching Blocks Ordering Information Description Catalog Number ComProtect Protectors with Ground Bars Package of 10, black housing Package of 8, black housing ComProtect Protectors without Ground Bars Package of 25 Black housing Yellow housing Red housing Package of 100 Black housing Yellow housing Red housing Ground Bars - Package of pair used on 10-pair Series 2 blocks pair used on 8-pair Series 2 blocks See ADC literature #104560AE 467

66 OmniReach FTTN Solutions KRONE Series 2 K110: 10-Pair Disconnect Block Features The original IDC termination block system Can be custom configured to meet specific application requirements Available in 8- and 10-pair configurations Unique center port design allows for patching or testing without removing cross-connect wires or disrupting the circuit Versatile mounting hardware allows mounting on wall, in racks, etc. Comprehensive labeling options Ordering Information Series 2 10-pair disconnect block Description Dimensions (HxWxD) Catalog Number 8-pair Series 2 block Quantity: 1 (order in multiples of 10) Snaps into Type 85 rod mount bracket or standard Type 85 back mount frame 0.88" x 4.88" x 1.63" (22.35mm x 123mm x 41.4mm) pair Series 2 K110 disconnect block Quantity per Pack: 10 Snaps into universal mounting system, Type 105 rod mount bracket or standard Type 105 back mount frame. Wires can be terminated with either KRONE insertion tool or industry-standard punchdown tool equipped with 110-blade 10-pair Series 10 block Quantity: 1 (order in multiples of 10) Snaps into Type 85 rod mount bracket 10-pair Series 10 block Quantity: 1 (order in multiples of 10) Includes (20) 5mm spacers for even spacing on Type 85 rod mount bracket 0.88" x 4.88" x 1.63" (22.35mm x 123mm x 41.4mm) 0.88" x 4.06" x 1.63" (22.35mm x 103.1mm x 41.4mm) 0.88" x 4.06" x 1.63" (22.35mm x 103.1mm x 41.4mm) See ADC literature #

67 OmniReach FTTN Solutions KRONE Series 2 K110: 25-/50-pair 89D-Style Blocks Features Upgrade from 66-type technology Unique center port allows monitoring and look-both-ways testing without disturbing IDC Double the density at the demarcation point Available in traditional 25- and 50-pair increments Fits 89D-style mounting brackets Preterminated blocks available with a range of connector styles and positioning options The K110 feature enables the termination of wire with either the KRONE insertion tool or any industry-standard punchdown tool with a 110 blade. Please note, the 5-pair disconnect block is not K110 compatible. Ordering Information 25-pair block 5-pair block 50-pair block Description Dimensions (HxWxD) Catalog Number 25-pair disconnect block assembly Quantity: 1 Field-terminated disconnect block; snaps into 89D bracket; includes label for empty half 10" x 3.38" x 1.38" (254mm x 85.85mm x 35.05mm) pair disconnect block assembly Quantity: 1 Field-terminated disconnect block; snaps into 89D bracket; includes label and label holder 5-pair disconnect block Quantity: Field-terminated disconnect block; mounts directly to wall or in an enclosure This block is not K110 compatible 10" x 3.38" x 1.38" (254mm x 85.85mm x 35.05mm) 2" x 2" x 1.25" (50.8mm x 50.8mm x 31.8mm) See ADC literature #

68 OmniReach FTTN Solutions HighBand 10: Termination Blocks HighBand 10 Category 5e termination blocks utilize the silver plated, world renowned LSA- PLUS contact principle. This technology has become the industry standard in over 140 countries. The gas-tight contacts ensure a reliable and long lasting connection. The frequent rewiring that occurs in today s deployments can quickly degrade the quality of wire terminations. ADC products maintain superior connectivity during hundreds of re-terminations and deliver the best electrical performance in the industry. The HighBand 10 block is available in both preterminated units and field-terminated kits. HighBand 10 preterminated blocks are wired to industry standard 25-pair Telco connectors that are mounted in the rear of the back mount frame, allowing for fast Broadband/DSL service installations. The 25-pair connectors are oriented for top feed cable assemblies. These blocks are available in 100-, 200- or 300-pair configurations. HighBand 10 field-terminated kits are a flexible solution for custom applications where preterminated blocks are not ideal. Preterminated Block Assemblies HighBand 10 Termination Block Field-terminated Block Kits See ADC literature #103789AE. 470

69 OmniReach FTTN Solutions HighBand 10: Termination Blocks Features & Benefits HighBand 10 blocks meet TIA/EIA Category 5e component specifications, resulting in increased throughput for DSL and other broadband applications. 10-pair increment block is ideal for multi-pair backbone cables. HighBand 10 blocks are familiar to LSA-PLUS Series 2 users and installers, eliminating the need for additional training. Test port provides look-both-ways testing capability without the removal of any wires; also allows simple monitoring of a circuit using ADC test cords. Ordering Information Description Preterminated Blocks HighBand pair block HighBand pair block HighBand pair preterminated block Field-Terminated Kits HighBand pair field-terminated back mount frame kit HighBand pair field-terminated back mount frame kit HighBand pair field-terminated rod mount frame kit Accessories Preterminated blocks reduce installation time. Labeling options allow for comprehensive identification. The high-density IDC termination system allows for more pair terminations in standard relay rack applications. Field-terminated kits are a flexible solution for custom applications. Silver plated LSA-PLUS contacts provide corrosion resistance. Dimensions (H x W x D) Catalog Number 245 mm x 124 mm x 94 mm (9.66" x 4.88" x 3.69") 468 mm x 124 mm x 94 mm (18.44" x 4.88" x 3.69") 689 mm x 124 mm x 94 mm (27.12" x 4.88" x 3.69") 468 mm x 124 mm x 94 mm (18.44" x 4.88" x 3.69") 689 mm x 124 mm x 94 mm (27.12" x 4.88" x 3.69") 473 mm x 124 mm x 94 mm (18.63" x 4.88" x 3.69") HighBand pair termination block HighBand to Series 2 one-pair adapter Red marking plugs - Quantity per pack: Red marking cap - Quantity per pack: One-pair Monitoring test cord with two banana plugs (1-foot cord) One-pair Look-both-ways test cord with four banana plugs (1-foot cord) Disconnection plugs, green - Quantity per pack: See ADC literature #103789AE. 471

70 OmniReach FTTN Solutions ComProtect Building Entrance Terminals (BET) ADC s ComProtect Building Entrance Terminals provide high-density primary protection at commercial demarcations and are fully compliant to UL and Telcordia specifications. These units can be used in both indoor and outdoor applications and provide up to 50% space savings over traditional Building Entrance Terminals using 5-pin protection. Features Telcordia approved ComProtect protection modules safeguard valuable cable plant and equipment from voltage surges and spikes Lockable metal enclosure with Telco override cover and a splicing chamber with the choice of either 710 or MS 2 splice connectors LSA-PLUS cross connect field and protection field combined for High-Density Solution Lightweight, compact and removable top to enable stacking units Instructions, template and mounting hardware included to mount the terminal directly to a wall Reduced size over traditional BET footprint for tight to fit spaces Applications Primary protection at commercial and MDU demarcation points Primary protection for campus environments MS 2 is a registered trademark of 3M. UL is a registered trademark of Underwriters Laboratories. Telcordia is a registered trademark of Telcordia Technologies, Inc. Compliances 100 pair 50 pair UL 497 listed 100% compliant with Telcordia GR-937 See ADC literature #106712AE 472

71 OmniReach FTTN Solutions ComProtect Building Entrance Terminals (BET) Ordering Information Description Catalog Number 25-pair Indoor/Outdoor Enclosed building entrance terminal Quantity: splice connector input 6649CP MS 2 splice connector input 6649CP pair Indoor/Outdoor Enclosed building entrance terminal Quantity: splice connector input 6649CP MS 2 splice connector input 6649CP pair Indoor/Outdoor Enclosed building entrance terminal Quantity: splice connector input 6649CP MS 2 splice connector input 6649CP ComProtect overvoltage protection modules sold seperately. Other configurations available; please contact ADC Technical Assistance Center. MS 2 is a registered trademark of 3M. See ADC literature #106712AE. 473

72 OmniReach FTTN Solutions Building Entrance Terminals: Enclosed, 5-Pin Protection with KRONE Series 2 Blocks Features 100-pair indoor enclosed 5-pin building entrance terminal with doors open 5-pin protection devices safeguard valuable cable plant and equipment from voltage surges and spikes Lockable metal enclosure with Telco override cover and a splicing chamber with the choice of either 710 or MS 2 splice connectors 5-pin protectors are rated 300 volts 10-pair Series 2 disconnect block output field provided for cross-connection, look-both-ways testing and monitoring without removing wires or protectors MS 2 is a registered trademark of 3M 100-pair 5-pin indoor enclosed building entrance terminal with doors closed with RJ-21X output shown 25-pair female Telco (RJ-21X) connectors available on indoor units Lightweight, compact and fully stackable Instructions, template and mounting hardware included to mount the terminal directly to a wall UL 497 listed 100% compliant with Telcordia TR-NWT See ADC literature #

73 OmniReach FTTN Solutions Building Entrance Terminals: Enclosed, 5-Pin Protection with KRONE Series 2 Blocks Ordering Information Description 25-pair indoor enclosed 5-pin building entrance terminal Quantity: splice connector input and RJ-21X optional output MS2 splice connector input and RJ-21X optional output Dimensions (H x W x D) Catalog Number 7.5" x 15.5" x 5.4" ( mm x mm x mm) 7.5" x 15.5" x 5.4" ( mm x mm x mm) 25-pair outdoor enclosed 5-pin building entrance terminal Quantity: splice connector input 11.35" x 10.65" x 6.08" ( mm x mm x mm) MS2 splice connector input 11.35" x 10.65" x 6.08" ( mm x mm x mm) 50-pair indoor enclosed 5-pin building entrance terminal Quantity: splice connector input 11.25" x 15.63" x 5.38" ( mm x 397 mm x mm) MS2 splice connector input 11.25" x 15.63" x 5.38" ( mm x 397 mm x mm) 710 splice connector input and RJ-21X optional output MS2 splice connector input and RJ-21X optional output 11.25" x 15.63" x 5.38" ( mm x 397 mm x mm) 11.25" x 15.63" x 5.38" ( mm x 397 mm x mm) 50-pair outdoor enclosed 5-pin building entrance terminal Quantity: splice connector input 13.88" x 19.63" x 6.38" ( mm x 499 mm x 162 mm) MS2 splice connector input 13.88" x 19.63" x 6.38" ( mm x 499 mm x 162 mm) 100-pair indoor enclosed 5-pin building entrance terminal Quantity: splice connector input 11.25" x 18.25" x 5.38" ( mm x mm x mm) MS2 splice connector input 11.25" x 18.25" x 5.38" ( mm x mm x mm) 710 splice connector input and RJ-21X optional output MS2 splice connector input and RJ-21X optional output 11.25" x 18.25" x 5.38" ( mm x mm x mm) 11.25" x 18.25" x 5.38" ( mm x mm x mm) 100-pair outdoor enclosed 5-pin building entrance terminal Quantity: splice connector input 13.88" x 19.63" x 6.38" ( mm x 499 mm x 162 mm) MS2 splice connector input 13.88" x 19.63" x 6.38" ( mm x 499 mm x 162 mm) Other configurations available; please contact ADC Technical Assistance Center MS 2 is a registered trademark of 3M See ADC literature #

74 OmniReach FTTN Solutions Building Entrance Terminals: High-Density, 5-Pin Protection with KRONE Series 2 Blocks 50-pair 5-pin protection building entrance terminal Features High-density primary protection allows up to eighteen (double-sided) 100-pair units to be mounted in a standard 7-foot, 19-inch rack 26 AWG cable stub is provided for splicing to the incoming 24 AWG cable Building entrance terminals available with 5-pin protectors in 25-, 50- and 100-pair units 5-pin protectors are rated 300 volts 25-pair 5-pin protection building entrance terminal Telecordia is a registered trademark of Telecordia Technologies, Inc. 100-pair 5-pin protection only building entrance terminal with top and bottom stubs Allow look-both-ways testing and monitoring without removing wires or protection Numerous labeling options allow comprehensive marking Variety of mounting hardware options UL 497 listed 100% compliant with Telcordia TR-NWT See ADC literature #

75 OmniReach FTTN Solutions Building Entrance Terminals: High-Density, 5-Pin Protection with KRONE Series 2 Blocks 100-pair 5-pin protection building entrance terminal with bottom entrance stub Ordering Information Description 25-pair 5-pin protection building terminal, bottom entrance stub Quantity: 1 50-pair 5-pin protection building entrance terminal, bottom entrance stub Quantity: pair 5-pin protection building entrance terminal, bottom entrance stub Quantity: 1 5-pin protectors included 5-pin protectors included; (4) 25-pin Telco (RJ-21X) connectors mounted on back for fast installation 100-pair 5-pin protection building entrance terminal, top entrance stub Quantity: pair 5-pin protection building entrance terminal, bottom rear entrance stub Quantity: 1; 5-pin protectors included 5-pin protectors included; (4) 25-pin Telco (RJ-21X) connectors mounted on back for fast installation 100-pair 5-pin protection building entrance terminal, top rear entrance stub Quantity: pair 5-pin protection building entrance terminal, protection only, bottom and top stubs Quantity: 1 Dimensions (H x W x D) Catalog Number 8.75" x 6" x 4.88" /XX (222.3 mm x mm x mm) 14" x 6" x 4.88" /XX (355.6 mm x mm x mm 19.88" x 6.06" x 4.88" /XX (505 mm x mm x mm) 19.88" x 6.06" x 4.88" (505 mm x mm x mm) 19.88" x 6.06" x 4.88" (505 mm x mm x mm) 19.88" x 6.06" x 4.88" (505 mm x mm x mm) 10.75" x 6.06" x 2.75" ( mm x mm x mm) /XX /XX /XX /XX /XX /XX * Replace XX with: 25 = 25' 50 = 50' See ADC literature #