Phased Array Probes - Wedges. New Offering Update December 2017

Transcription

1 Phased Array Probes - Wedges New Offering Update December 2017

2 X series PA Probes & Wedges X0 - Low Profile X1 - Miniature X2 - Compact Sectorial Scan X3 - Sectorial & Linear Scan X3 Glider - Flexible Linear Scan X4 - Small Integral Wedge X5 - Deep Penetration (AWS & HT) X6 - Large Linear Scan Wide range with the assurance of industry standard configurations All X-series probes are now delivered with Quick I-PEX connector QX (including bracket) Integral 2.5m cable Other length and connector options are available upon request

3 PA Probes X series X0 - Low Profile These probes have a low profile design to fit in between small pipes (bore pipe). Elements are mechanically focused to optimize detection of defects into the welds of small-diameter pipes. Paired with a low profile scanner, it makes the ultimate scanning solution for PA inspection of circumferential welds in small bore pipework's. Applications: Bore pipe & small tube inspection Fits on most low profile scanners

4 PA Probes X series X0 - Low Profile Designed to be used with small pipe, low profile or bore pipe scanners Jireh - CIRC-IT Phoenix- BRACELET Olympus - COBRA New Sonatest X0 Series Wedges SW and LW inspection modes CIRC-IT & COBRA compatible BRACELET needs Phoenix wedges

5 PA Probes X series X3-Glider - Flexible Linear Scan Developed with the same rubber material as the patented Sonatest WheelProbe. 25mm rubber delay line Similar acoustic properties as water Both the linear array probe and the rubber delay line are enclosed in a robust metal jacket. The 3-Glider rubber will conform to a multitude of applications.

6 PA Probes X series X3 Glider - Flexible Linear Scan FAST to mount. EASY to manipulate. FEXIBLE and compatible with all the X3 Series probes. Linear Array up to 64E 4x frequencies (2.25, 3.5, 5 & 10MHz) Applications: Compact solution optimized for small composite manual inspection Aerospace parts (composite)

7 DAAH series Unique Sonatest Concept! Detachable Active Array Head Design where the phased array probe detaches from the cable DAAH concept & advantages Multiple cable length and splitter options Flexibility for a low investment Cost effective when to repair a cable rather than replace a complete probe set DAAH cable standard delivery Quick I-PEX connector (QX) 2m cable length Other length and connector options are available upon request DAAH is recognized for high performance & quality for more than 10 years

8 DAAH series PA Probes & Wedges DAAH 1A High Performance DAAH 1B Stainless Steel Dual Linear Array DAAH 1Z High Perfo & Compact Wedge DAAH 5A High Perfo & Large Linear Scan

9 PA Probes DAAH-series D1B - Dual Linear Array for Stainless Steel DAAH DLA Probes The new DAAH phased array Sonatest probe series are packaged in Dual Linear Array configuration to benefit from the low noise advantage of a Pitch & Catch design and the focussing and steering capabilities of the phased array beam forming (up to 32E). Based on the unique Sonatest DAAH design, these probes can be quickly replaced and support 2.25 MHz, 5 MHz and 7.5 MHz range of frequencies. High Resolution Stainless Steel Inspection Solution with VEO+ Because Sonatest veo+ has the best SNR performance on the market, it is not always required to sacrifice sensitivity and sizing capability over SNR anymore for stainless steel weld inspection. Paired with the good sizing capability of a 7.5 MHz DAAHTM DLA probe and high sensibility of veo+, Sonatest is proud to deliver a true solution to customers facing the challenges of inspecting stainless steel welds.

10 PA Probes DAAH series D1B - Stainless Steel DLA Same D1A acoustic specifications but mounted in a P&C configuration The only high resolution solution for stainless steel on the market (when paired with VEO+). Applications: General & critical welds (butt, T and corner joints) Austenitic stainless steel alloys Dissimilar welds Pressure vessels Very attenuative material

11 Quick I-PEX (QX) Connector New Standard for All The Quick I-PEX (QX) connector is now the new standard connector for all Sonatest Phased Array equipment X series probes DAAH series cables WP2 cables & adapters Custom extension or adapters Some exceptions apply, std I-PEX (IX) 128E connectors (cables and probes) DAAH dual cables or armor cables PA splitter boxes

12 Sonatest PA Probes New Description series & sub unique part # X0A-999 Probe Series & Sub Array Crystal Specifications Cable & Connector Specifications Probe series Wedge sub-series Crystal Frequency (MHz) X0A-2.25M16EFC35-0.5x10-SQX5 Array Element Quantity Crystal Option (Focusing, HardFace, Integral Wedge) Array Inter- Element Pitch (mm) Crystal Elevation (mm) Connector Type Cable Length (m) Probe QTY per Connector

13 Sonatest PA Wedges New Description series & sub unique part # X5AW-999 Wedge Series & Sub Wedge Acoustic Specifications Wedge Design Options Probe series Wedge sub-series Probe Mounting Normal / Lateral X5AW-N60S-IHC-HT Angle in steel Wave Mode SW or LW + delay line (mm) Wedge Design Options* *Additional options when manufacturing: AOD (mm or inch) COD (mm or inch) Other customization

14 Contact Sonatest to define your Phased Array solution Sonatest (Head Quarter) Milton Keynes, United Kingdom t: +44 (0) e: Sonatest USA San Antonio Texas, United States t: +1 (210) e:

15 You re a Sonatest Partner? Find the complete editable PPTx presentation (and more) online on your Sonatest Resource Centre (SRC)