Elos Fixturlaser AB. Generator alignment

Size: px
Start display at page:

Download "Elos Fixturlaser AB. Generator alignment"

Transcription

1 Elos Fixturlaser AB Generator alignment with Fixturlaser GO WORK Applies INSTRUCTION on Vestas turbines FOR of the USING types: FIXTURLASER V47, V52, V63, V66, GO V80, ON V90 VESTAS GENERATORS HHI 7/9/2009

2 Elos Fixturlaser AB Generator alignment with Fixturlaser GO Page 2 of 13 CONTENTS Work instruction for using Fixturlaser GO on Vestas generators... 1 Safety... 3 Educational Requirements... 3 Required Documentation... 3 Purpose... 3 Risk Assessment... 3 NOTE... 3 TOOLS... 3 Spare parts... 3 Weights... 3 Estimated time use... 3 Procedure... 3 Preparation... 3 Dismounting of coupling... 4 Alignment equipment Fixturlaser GO... 4 Mounting of equipment for alignment... 5 Measurement procedure... 7 Setting of tolerances... 7 Setting of target values (were applicable)... 8 Measuring... 9 Explanation of the result screen Alignment... 13

3 Elos Fixturlaser AB Generator alignment with Fixturlaser GO Page 3 of 13 SAFETY Carry out the work in accordance EDUCATIONAL REQUIREMENTS The service technician must possess REQUIRED DOCUMENTATION Document this Document that PURPOSE This instruction describes how to align the generator with the Fixturlaser GO alignment equipment RISK ASSESSMENT Some info goes here NOTE Always read the entire instruction and the attached risk assessment before the work is started TOOLS Item No Quantity Text 1 Laser alignment tool VT Turning Brake Disc SPARE PARTS Item No Quantity Text WEIGHTS Some info goes here ESTIMATED TIME USE Some info goes here PROCEDURE PREPARATION Before aligning with Fixturlaser GO the gearbox must be aligned according to the type of turbine, see O&M manual for the turbine type in question.

4 Elos Fixturlaser AB Generator alignment with Fixturlaser GO Page 4 of 13 For dismounting of the composite coupling the turbine must be braked and locked During the alignment the turbine and the rotor must be braked and locked, the blades must be in 90 position and the nacelle must be against the wind Maximum wind speed is according to Safety Regulations for Operators and Technicians. Turn off main switches. DISMOUNTING OF COUPLING Rotating parts Risk of being caught by rotating parts Do not work on rotating parts Lock the rotor before carrying out any work on the coupling or other rotating parts in the drive train. Stay at a safe distance from the coupling when it is being rotated without the cover mounted over it. Risk of hurting hands and feet Risk of squeezing hands and feet between brackets and brake disc flange when turning brake disc by hand Do not turn the brake disc by hand, always use VT , Turning Brake Disc. ALIGNMENT EQUIPMENT FIXTURLASER GO 1. RS-485 connectors (IP 54) 2. Alfa-numeric keyboard 3. Alignment status indicators a. Green within tolerance b. Orange within double tolerance c. Red out of double tolerance 4. On/Off button 5. Navigation buttons

5 Elos Fixturlaser AB Generator alignment with Fixturlaser GO Page 5 of 13 MOUNTING OF EQUIPMENT FOR ALIGNMENT Mounting of equipment with the coupling dismounted The S unit mounted on the gearbox side The M unit mounted on the generator side The picture shows how the fixtures are mounted on the respective side of the coupling

6 Elos Fixturlaser AB Generator alignment with Fixturlaser GO Page 6 of 13 Alternative mounting of equipment without removing the coupling Utilizing exiting coupling bolts to attach the fixtures with the S and M units. NOTE The M unit must be mounted on the generator side and the S unit on the gearbox side Each sensor unit is connected with cable to the display unit. It does not matter to which connector each unit is connected.

7 Elos Fixturlaser AB Generator alignment with Fixturlaser GO Page 7 of 13 MEASUREMENT PROCEDURE Operator Description Turn on the system Use the arrow keys to navigate to the icon for Horizontal shaft alignment. Press the OK button. Unlock the post fixings on the M unit and adjust the height of the unit so the laser line projected on the S unit is approximately in the middle of the sensor area. Lock the post fixings. SETTING OF TOLERANCES Operator Description Navigate to the Toolbox icon and press the OK button. Navigate to the tolerance table and press the OK button. Enter the specified tolerances for the machine you are about to align. Tolerances are found in the machine specification documents. Navigate to the exit icon and press the OK button.

8 Elos Fixturlaser AB Generator alignment with Fixturlaser GO Page 8 of 13 SETTING OF TARGET VALUES (WERE APPLICABLE) Operator Description Navigate to the Target values icon and press the OK button. Navigate to the Coupling values icon and press the OK button. Enter the specified target values, i.e. thermal growth values, in each of the available fields. The target values can be found in the machine specification documents. When finished, navigate to the OK icon and press the OK button. By entering target values into the system the alignment can be accomplished towards zero values and thereby utilizes the systems functionality for guiding the operator towards an alignment within tolerances.

9 Elos Fixturlaser AB Generator alignment with Fixturlaser GO Page 9 of 13 MEASURING Operator Description Measure the distance between the sensor heads. The measurement must be taken between the post centres. Enter the distance between the sensor heads. Press the OK button. The next measurement is automatically entered as half of the previous measurement. It represents the center of the coupling. Press the OK button. Measure the distance from the post centre of the M unit to the centre of the front generator foot Enter the value and press the OK button.

10 Elos Fixturlaser AB Generator alignment with Fixturlaser GO Page 10 of 13 Measure the distance between the centers of the front foot and the rear foot of the generator. Enter the values and press the OK button. Rotate the sensors to the 9 o clock position. The angle indicator on top of the screen guides you to position both sensors correctly. Navigate with the arrow keys to the measure icon and press the OK button to register the first reading of three. While the system samples the data this symbol is displayed on the screen. Rotate both sensor heads to the 3 o clock position and press the OK button to register the second reading.

11 Elos Fixturlaser AB Generator alignment with Fixturlaser GO Page 11 of 13 Rotate the sensor heads to the 12 o clock position and press the OK button to register the third and final reading. The result screen shows the generator position relative to the gearbox. Navigate to the Save icon and press the OK button. Save the measurement as an As found measurement. Name the measurement with the turbine identification. Note that the system utilizes multi tap technology, i.e. press the button several times to select between alphanumerical characters.

12 Elos Fixturlaser AB Generator alignment with Fixturlaser GO Page 12 of 13 EXPLANATION OF THE RESULT SCREEN The generators vertical position The generators horizontal position Parallel offset Angular misalignment Foot values shows the position relative to ideal position Within tolerance Outside tolerance Three LEDs on the Display Unit indicates the status of the coupling Green Within tolerance. Yellow Within double tolerance. Red Out of double tolerance.

13 Elos Fixturlaser AB Generator alignment with Fixturlaser GO Page 13 of 13 ALIGNMENT Operator Description Navigate with the arrow keys to the Shim icon and press the OK button. The screen displays live values and the arrows show you the direction you need to move the generator. Move the generator vertically by adding or removing shims until the alignment is within tolerances. Rotate the sensor heads to the 3 0 clock position. The screen changes to display the horizontal position of the generator. Move the generator according to the arrows until alignment within tolerances is achieved. When alignment is achieved, navigate with the arrow keys to the Re measure icon and press the OK button. Repeat the procedure under the Measurement headline and finalize by saving the measurement as an As left measurement.

E710 / E720. Machine Alignment and Installation E710 / E720

E710 / E720. Machine Alignment and Installation E710 / E720 E710 / E720 Machine Alignment and Installation E710 / E720 SHAFT ALIGNMENT HORIZONTAL MACHINES Horizontally coupled machines often consist of a pump and motor, but there can also be other types of machine

More information

SHAFT ALIGNMENT. Quick, simple and effective! PC SOFTWARE INCLUDED PRINTER CONNECTION EXPANDABLE MEASUREMENT VALUE FILTER COMPENSATION THERMAL GROWTH

SHAFT ALIGNMENT. Quick, simple and effective! PC SOFTWARE INCLUDED PRINTER CONNECTION EXPANDABLE MEASUREMENT VALUE FILTER COMPENSATION THERMAL GROWTH D505 D525 SHAFT ALIGNMENT Quick, simple and effective! PC SOFTWARE INCLUDED PRINTER CONNECTION EXPANDABLE COMPENSATION THERMAL GROWTH TOLERANCE CHECK MEASUREMENT VALUE FILTER 40 MINIMUM ROTATION FOR ALL

More information

D550 Extreme SHAFT ALIGNMENT. For alignment in potentially explosive environments (ATEX/Ex) 4-YEAR WARRANTY

D550 Extreme SHAFT ALIGNMENT. For alignment in potentially explosive environments (ATEX/Ex) 4-YEAR WARRANTY D550 Extreme 4-YEAR WARRANTY SHAFT ALIGNMENT For alignment in potentially explosive environments (ATEX/Ex) FOR EXTREME ENVIRONMENTS Easy-Laser Extreme is one of the toughest and most robust measurement

More information

SHAFT ALIGNMENT. Compact size! Professional measurement and alignment system for rotating machines.

SHAFT ALIGNMENT. Compact size! Professional measurement and alignment system for rotating machines. EXPANDABLE QUICK START 40 MIN. ROTATION BUILT-IN WIRELESS UNITS Compact size! Fits most machine types also when space is limited. SHAFT ALIGNMENT Professional measurement and alignment system for rotating

More information

SKF Shaft Alignment Tool Vertical machines app

SKF Shaft Alignment Tool Vertical machines app SKF Shaft Alignment Tool Vertical machines app Flange mounted machines Instructions for use Table of contents 1. Using the Vertical shaft alignment app... 2 1.1 How to change the app language...2 1.2

More information

S-650 Coupling Alignment System

S-650 Coupling Alignment System S-650 Coupling A new generation of 5-axis, real-time coupling alignment systems. Geometric Alignment Laser Systems The Best Choice in Coupling Alignment is Easy to See 1 Largest target cell size on the

More information

Geometry Measurements

Geometry Measurements Geometry Measurements Welcome to our world Since the very beginning in 1984, ACOEM AB has helped industries throughout the world to achieve more profitable and sustainable production. We have reached where

More information

How to use Leica DISTO D510

How to use Leica DISTO D510 How to use Leica DISTO D510 Switch On and Off The Press key switches and activates the laser in a single press. once quickly to shoot a distance or... Press and hold for 2 seconds to activate continuous

More information

USER MANUAL Fixturlaser ECO

USER MANUAL Fixturlaser ECO USER MANUAL Fixturlaser ECO CONTENT Welcome to our world 1.1 Declaration of Conformity 2.1 Safety 3.1 Care 4.1 Main Menu 5.1 Shaft Alignment 6.1 Horizontal Machines Softcheck 7.1 Memory Manager 8.1 Global

More information

QUICK START 40 MIN. ROTATION ENTERING SHAFT ALIGNMENT. Professional measurement and alignment system for rotating machines

QUICK START 40 MIN. ROTATION ENTERING SHAFT ALIGNMENT. Professional measurement and alignment system for rotating machines EXPANDABLE QUICK START 40 MIN. ROTATION BARCODE ENTERING SHAFT ALIGNMENT Professional measurement and alignment system for rotating machines SIMPLY EFFICIENT! OPTIMIZE OPERATING CONDITIONS Easy-Laser E530

More information

SHAFT ALIGNMENT. Quick, simple and effective! PC SOFTWARE INCLUDED PRINTER CONNECTION EXPANDABLE MEASUREMENT VALUE FILTER COMPENSATION THERMAL GROWTH

SHAFT ALIGNMENT. Quick, simple and effective! PC SOFTWARE INCLUDED PRINTER CONNECTION EXPANDABLE MEASUREMENT VALUE FILTER COMPENSATION THERMAL GROWTH D505 D525 SHAFT ALIGNMENT Quick, simple and effective! PC SOFTWARE INCLUDED PRINTER CONNECTION EXPANDABLE COMPENSATION THERMAL GROWTH TOLERANCE CHECK MEASUREMENT VALUE FILTER 40 MINIMUM ROTATION FOR ALL

More information

OPERATING INSTRUCTIONS:

OPERATING INSTRUCTIONS: List OPERATING INSTRUCTIONS: Preparation For Installation, Product Identification Charging The Batteries ing And Adjusting The Lift Mounting Head s Brackets Mounting Clamps And Quick-Locking Arms Installation

More information

E540. Shaft Alignment E540

E540. Shaft Alignment E540 E540 Shaft Alignment E540 SIMPLY EFFICIENT! OPTIMIZE OPERATING CONDITIONS Easy-Laser E540 is a precise and competent alignment system for your rotating machinery. Easy-Laser E540 provides the ideal balance

More information

USER MANUAL Fixturlaser NXA

USER MANUAL Fixturlaser NXA USER MANUAL Fixturlaser NXA CONTENT Welcome to our world 1.1 Declaration of Conformity 2.1 Safety 3.1 Care 4.1 Main Menu 5.1 Shaft Alignment 6.1 Horizontal Machines Shaft Alignment 7.1 Vertical Machines

More information

Welcome to our world.

Welcome to our world. Fixturlaser NXA Pro Welcome to our world. Since the very beginning in 1984, ELOS Fixturlaser has helped industries throughout the world to achieve more profitable and sustainable production. We have reached

More information

STEALTH SERIES SHAFT ALIGNMENT SYSTEMS S - 670CRT & S - 670T W I R E L E S S 3 - A X I S

STEALTH SERIES SHAFT ALIGNMENT SYSTEMS S - 670CRT & S - 670T W I R E L E S S 3 - A X I S ALIGN WITH THE BEST STEALTH SERIES SHAFT ALIGNMENT SYSTEMS S - 670CRT & S - 670T W I R E L E S S 3 - A X I S Highest Accuracy in its Class MS Windows 8 Rugged Tablets Patented Dual-Beam Technology Any

More information

ALiSENSOR. ALiSENSOR SHAFTLASER. Modern Shaft Alignment

ALiSENSOR. ALiSENSOR SHAFTLASER. Modern Shaft Alignment ALiSENSOR SHAFTLASER ALiSENSOR SHAFTLASER Modern Shaft Alignment Index 1 Introduction 2 The System 3 Shaft Alignment Horizontal machines 4 Equipment Setup 5 Alternative Setup methods 6 Start Shaft Alignment

More information

SKF Shaft Alignment Tool TKSA 31 & TKSA 41. Quick Start Guide

SKF Shaft Alignment Tool TKSA 31 & TKSA 41. Quick Start Guide SKF Shaft Alignment Tool TKSA 31 & TKSA 41 Quick Start Guide 1. Case content 8 1 6 9 5 2 7 4 4 3 1. 1 TKSA 31/41 Display unit 2. 1 TKSA 31/41 S Measuring unit 3. 1 TKSA 31/41 M Measuring unit 4. 2 Shaft

More information

TABLE OF CONTENTS TABLE OF CONTENTS... 1 MANUAL REVISION HISTORY... 2 IMPORTANT SAFETY NOTICE...

TABLE OF CONTENTS TABLE OF CONTENTS... 1 MANUAL REVISION HISTORY... 2 IMPORTANT SAFETY NOTICE... TABLE OF CONTENTS TABLE OF CONTENTS... 1 MANUAL REVISION HISTORY... 2 IMPORTANT SAFETY NOTICE... 3 1.0 General Information... 5 1.1 System Components... 5 1.2 Specifications... 5 1.2.1 Torque Ranges...

More information

Welcome to our world.

Welcome to our world. Fixturlaser NXA Pro Welcome to our world. Since the very beginning in 1984, ACOEM AB has helped industries throughout the world to achieve more profitable and sustainable production. We have reached where

More information

STEALTH SERIES SHAFT ALIGNMENT SYSTEMS

STEALTH SERIES SHAFT ALIGNMENT SYSTEMS ALIGN WITH THE BEST STEALTH SERIES SHAFT ALIGNMENT SYSTEMS S - 6 7 0 T W I R E L E S S 3 - A X I S Highest Accuracy in its Class Win 7/8 IP65 Rugged Tablets 9" or 10" Touchscreen Displays Patented Dual-Beam

More information

STEALTH SERIES SHAFT ALIGNMENT SYSTEMS S T W I R E L E S S 5 - A X I S

STEALTH SERIES SHAFT ALIGNMENT SYSTEMS S T W I R E L E S S 5 - A X I S ALIGN WITH THE BEST STEALTH SERIES SHAFT ALIGNMENT SYSTEMS S - 6 8 0 T W I R E L E S S 5 - A X I S Highest Accuracy in Industry Win 7/8 IP65 Rugged Tablets 10" Outdoor Touchscreen Display Patented Dual-Beam

More information

XT550. Intrinsically safe for potentially explosive environments. Shaft Alignment

XT550. Intrinsically safe for potentially explosive environments. Shaft Alignment XT550 Intrinsically safe for potentially explosive environments. Shaft Alignment THIS IS EASY ALIGNMENT HORIZONTAL PROGRAM The user interface is intuitive and guides you through the measurement process.

More information

Stealth SerieS. Shaft alignment SyStemS S-680BT WIRELESS 5-AXIS

Stealth SerieS. Shaft alignment SyStemS S-680BT WIRELESS 5-AXIS ALIGN WITH THE BEST Stealth SerieS Shaft alignment SyStemS S-680BT WIRELESS 5-AXIS Highest Accuracy in Industry IP65 Windows 8.1 Rugged Tablet 10" Touchscreen Display Patented Dual-Beam Technology Duo-Plane

More information

BMW KDS Wheel Alignment System

BMW KDS Wheel Alignment System OPERATION INSTRUCTIONS Form 5215T, 09-04 BMW KDS Wheel Alignment System WinAlign Program Version 8.0 Copyright 2004 Hunter Engineering Company Contents 1. Getting Started... 1 1.1 Introduction... 1 1.2

More information

XT550. Intrinsically safe for potentially explosive environments. Shaft Alignment

XT550. Intrinsically safe for potentially explosive environments. Shaft Alignment XT550 Intrinsically safe for potentially explosive environments. Shaft Alignment THIS IS EASY ALIGNMENT HORIZONTAL PROGRAM The user interface is intuitive and guides you through the measurement process.

More information

Up to 50% of all costs related to rotating machinery breakdowns is caused by shaft misalignment

Up to 50% of all costs related to rotating machinery breakdowns is caused by shaft misalignment Up to 50% of all costs related to rotating machinery breakdowns is caused by shaft misalignment Shaft misalignment is responsible for up to 50% of all costs related to rotating machinery breakdowns. These

More information

Welcome to our world.

Welcome to our world. FIXTURLASER NXA Pro Welcome to our world. ble production. We have reached where we are today by having the courage to think beyond the norm and follow slightly unconven- we have become a global player

More information

XT660. Alignment system for all important steps of machine installation. Shaft Alignment

XT660. Alignment system for all important steps of machine installation. Shaft Alignment XT660 Alignment system for all important steps of machine installation. Shaft Alignment MEASUREMENT INDEPENDENCE EASY-LASER GENERATION XT Easy-Laser XT660 is the second member of our Generation XT alignment

More information

Stealth SerieS. Shaft alignment SyStemS S-680T WIRELESS 5-AXIS

Stealth SerieS. Shaft alignment SyStemS S-680T WIRELESS 5-AXIS ALIGN WITH THE BEST Stealth SerieS Shaft alignment SyStemS S-680T WIRELESS 5-AXIS Highest Accuracy in Industry IP65 Windows 8.1 Rugged Tablet 10" Outdoor Touchscreen Displays Patented Dual-Beam Technology

More information

Welcome to our world.

Welcome to our world. FIXTURLASER NXA Pro Welcome to our world. Since the very beginning in 1984, ACOEM AB has helped industries throughout the world to achieve more profitable and sustainable production. We have reached where

More information

Wireless Cold Clearance Measurement System For Power Plant Turbines

Wireless Cold Clearance Measurement System For Power Plant Turbines USER MANUAL Wireless Cold Clearance Measurement System For Power Plant Turbines Model CMS-3000 Serial Nos. PHILTEC www.philtec.com Fiberoptic Sensors for the Measurement of Distance, Displacement and Vibration

More information

TABLE OF CONTENTS TABLE OF CONTENTS... 1 IMPORTANT SAFETY NOTICE...

TABLE OF CONTENTS TABLE OF CONTENTS... 1 IMPORTANT SAFETY NOTICE... TABLE OF CONTENTS TABLE OF CONTENTS... 1 IMPORTANT SAFETY NOTICE... 2 1.0 General Information... 3 1.1 System Components... 3 1.2 Specifications... 3 1.2.1 Torque Ranges... 3 1.2.2 Electrical Specifications...

More information

STEALTH SERIES TM S T WIRELESS 5 -AXIS SHAFT ALIGNMENT SYSTEMS

STEALTH SERIES TM S T WIRELESS 5 -AXIS SHAFT ALIGNMENT SYSTEMS ALIGN WITH THE BEST STEALTH SERIES TM SHAFT ALIGNMENT SYSTEMS S - 6 8 0 T WIRELESS 5 -AXIS Highest Accuracy in Industry Win 7/8 IP65 Rugged Tablets 10" Outdoor Touchscreen Display Patented Dual-BeamTM

More information

USER MANUAL. Turbine Blade Tip-to-Casing Cold Clearance. Wireless Measurement Kit CMS Model

USER MANUAL. Turbine Blade Tip-to-Casing Cold Clearance. Wireless Measurement Kit CMS Model USER MANUAL Turbine Blade Tip-to-Casing Cold Clearance Wireless Measurement Kit Model CMS-3400 PHILTEC 1 www.philtec.com Fiber Optic Sensors for the Measurement of Distance, Displacement and Vibration

More information

High-End System Accuracy at Entry-Level Pricing Windows Rugged Industrial Tablets 8 & 10 Touchscreen Displays Innovative Dual-Fan Technology Any

High-End System Accuracy at Entry-Level Pricing Windows Rugged Industrial Tablets 8 & 10 Touchscreen Displays Innovative Dual-Fan Technology Any High-End System Accuracy at Entry-Level Pricing Windows Rugged Industrial Tablets 8 & 10 Touchscreen Displays Innovative Dual-Fan Technology Any Point Live Move Screen Embedded Bluetooth Class II IP67

More information

High-End System Accuracy at Entry-Level Pricing Windows Rugged Industrial Tablets 8 & 10 Touchscreen Displays Innovative Dual-Fan Technology Any

High-End System Accuracy at Entry-Level Pricing Windows Rugged Industrial Tablets 8 & 10 Touchscreen Displays Innovative Dual-Fan Technology Any High-End System Accuracy at Entry-Level Pricing Windows Rugged Industrial Tablets 8 & 10 Touchscreen Displays Innovative Dual-Fan Technology Any Point Live Move Screen Embedded Bluetooth Class II IP67

More information

XT660. Alignment system for all important steps of machine installation. Shaft Alignment

XT660. Alignment system for all important steps of machine installation. Shaft Alignment XT660 Alignment system for all important steps of machine installation. Shaft Alignment MEASUREMENT INDEPENDENCE EASY-LASER GENERATION XT Easy-Laser XT660 is the second member of our Generation XT alignment

More information

SHAFTALIGN Redefining the standard of laser shaft alignment

SHAFTALIGN Redefining the standard of laser shaft alignment SHAFTALIGN Redefining the standard of laser shaft alignment More than fourty years of experience in precision shaft alignment For over four decades, PRÜFTECHNIK Alignment Systems has continued to develop

More information

SKF Shaft Alignment Tool TKSA 31

SKF Shaft Alignment Tool TKSA 31 SKF Shaft Alignment Tool TKSA 31 SKF Maintenance Products April 2015 E&OE SKF Shaft Alignment Tool TKSA 31 The intuitive and affordable laser shaft alignment system. Slide 3 Introduction of the TKSA 31

More information

XT660. Alignment system for all important steps of machine installation. Shaft Alignment

XT660. Alignment system for all important steps of machine installation. Shaft Alignment XT660 Alignment system for all important steps of machine installation. Shaft Alignment MEASUREMENT INDEPENDENCE EASY-LASER GENERATION XT Easy-Laser XT660 is the second member of our Generation XT alignment

More information

ЗАО «БЕРГ АБ», (495) , Intrinsically safe shaft alignment tool with printer

ЗАО «БЕРГ АБ», (495) ,  Intrinsically safe shaft alignment tool with printer Intrinsically safe shaft alignment tool with printer Intrinsically safe shaft alignment tool with printer TMEA 1PEx Application Perfect alignment of machinery shafts is crucial to prevent premature bearing

More information

DEFLECTION AND TWIST MEASUREMENT SYSTEM (DTMS) Model 47

DEFLECTION AND TWIST MEASUREMENT SYSTEM (DTMS) Model 47 Features DEFLECTION AND TWIST MEASUREMENT SYSTEM (DTMS) Model 47 Results are not affected by the motion or acceleration of the structure being tested Three or five degrees of freedom are measured between

More information

from P.R.Engineering Ltd Tel:

from P.R.Engineering Ltd   Tel: Quick Start FRE-205 INSTRUCTIONS from P.R.Engineering Ltd www.laser-level.co.uk Tel: 01246 269 777 Thank you for purchasing the FRE-205 Auto Rotary laser level kit. These instructions are intended to explain

More information

Stealth SerieS. Shaft alignment SyStemS S-660CRT & S-660T WIRELESS 3-AXIS

Stealth SerieS. Shaft alignment SyStemS S-660CRT & S-660T WIRELESS 3-AXIS ALIGN WITH THE BEST Stealth SerieS Shaft alignment SyStemS S-660CRT & S-660T WIRELESS 3-AXIS High-End System Accuracy at Entry-Level Pricing Windows 7/8 Rugged Industrial Tablets 8" & 10" Touchscreen Displays

More information

Navigator II INstallatIoN MaNUal For static and PaN/tIlt configurations

Navigator II INstallatIoN MaNUal For static and PaN/tIlt configurations Navigator II Installation MANUAL For Static and Pan/Tilt Configurations Document Number: 432-0001-00-12, rev 100 FLIR Systems, Inc., 2008. All rights reserved worldwide. No parts of this manual, in whole

More information

Portable equipment N130/N330 QUICK GUIDE BASIC OPERATIONS

Portable equipment N130/N330 QUICK GUIDE BASIC OPERATIONS Portable equipment N130/N330 QUICK GUIDE BASIC OPERATIONS Instruments overview N330 Ports for sensors, power supply and USB CONNECTION PORTS 5 4 3 2 1 Connector 1: sensor Channel A input Connector 2: sensor

More information

Using the Android teach-pad

Using the Android teach-pad with ROBWIN 7 and ROBOFORTH II v15/16 Components The components of the system are: 7 inch hand-held tablet Android software (apk or app ) already loaded. Bluetooth adaptor Serial port on rear of controller

More information

Fixturlaser SMC Balancer. QUICK TIPS Fixturlaser SMC BALANCER

Fixturlaser SMC Balancer. QUICK TIPS Fixturlaser SMC BALANCER QUICK TIPS Fixturlaser SMC BALANCER Products FIXTURLASER SMC DU ACCELEROMETERS 2 ASH accelerometers 2 straight cables for ASH 2 high-power magnets for ASH Fixturlaser SMC Trap For connectors (USB, power

More information

Basic Modeling 1 Tekla Structures 12.0 Basic Training September 19, 2006

Basic Modeling 1 Tekla Structures 12.0 Basic Training September 19, 2006 Tekla Structures 12.0 Basic Training September 19, 2006 Copyright 2006 Tekla Corporation Contents Contents 3 1 5 1.1 Start Tekla Structures 6 1.2 Create a New Model BasicModel1 7 1.3 Create Grids 10 1.4

More information

SHAFTALIGN OS3 The efficiency of laser shaft alignment

SHAFTALIGN OS3 The efficiency of laser shaft alignment SHAFTALIGN OS3 The efficiency of laser shaft alignment Thirty years laser shaft alignment Precision shaft alignment pays back Precision shaft alignment extends machine uptime. It contributes in more than

More information

ROTALIGN Ultra is The Alignment intelligent System

ROTALIGN Ultra is The Alignment intelligent System ROTALIGN Ultra is The Alignment intelligent System We care about your assets Present in all industries PRÜFTECHNIK Alignment Systems, the inventor of laser alignment, has many decades experience developing,

More information

SYSTEM WORLD PRODUCT INFO

SYSTEM WORLD PRODUCT INFO SYSTEM WORLD PRODUCT INFO August 208 System case.. System Case Configuration.. Width x depth x height (inches).56 x 0.62 x 3.3 inches Number of System Boxes Material Lid Type Art. No. Empty* ABS Black

More information

BND TechSource. Ergonomic Manikin Manipulation using CATIA V5 DMU Kinematics. (Steps 5-11 the optimized solution)

BND TechSource. Ergonomic Manikin Manipulation using CATIA V5 DMU Kinematics. (Steps 5-11 the optimized solution) Ergonomic Manikin Manipulation using CATIA V5 DMU Kinematics (Steps 5-11 the optimized solution) In the previous example, we showed a simple solution to manipulate an Ergonomic Manikin using CATIA DMU

More information

SKF TKSA 51. Instructions for use

SKF TKSA 51. Instructions for use SKF TKSA 51 Instructions for use Table of contents EC Declaration of conformity...2 Safety recommendations...3 1. Introduction...4 1.1 Shaft alignment overview... 4 1.2 Principle of operation... 5 1.3

More information

Scanner 2000 microefm QuickStart. Installing the Scanner Remote Mount. Direct Mount NUFLO. Part No , Rev. A

Scanner 2000 microefm QuickStart. Installing the Scanner Remote Mount. Direct Mount NUFLO. Part No , Rev. A NUFLO Part No. 30165024, Rev. A Scanner 2000 microefm QuickStart Installing the Scanner 2000 H L H L Flow Direct Mount To install the Scanner 2000 microefm using a direct mount to an orifice or cone meter

More information

Fixturlaser SMC Supervisor QUICK TIPS. Fixturlaser SMC

Fixturlaser SMC Supervisor QUICK TIPS. Fixturlaser SMC QUICK TIPS Fixturlaser SMC Products FIXTURLASER SMC WIRELESS SENSOR Protection of the USB input Fixturlaser SMC Trap For connectors (USB, power supply, Ethernet...) USB Cable for the wireless sensor (power

More information

medemagroup Joystick DX2 User guide P Q ver October 2011

medemagroup Joystick DX2 User guide P Q ver October 2011 medemagroup P9-0290-Q ver. 1.0.2 - October 2011 GB User guide Joystick DX2 Quick guide P9-0290-Q 2 of 16 Version 1.0.2/2011 Contents Introduction...4 Joystick parts...5 Operating...5 Clock on/off...6 Set

More information

QUICK START HAWK BALANCER. NOT3052 November 2014 A

QUICK START HAWK BALANCER.   NOT3052 November 2014 A QUICK START HAWK BALANCER www.acoemgroup.com NOT0 November 0 A Products HAWK MEASUREMENT KIT Accelerometers ASH accelerometers straight cables for ASH high-power magnets for ASH HAWK Trap for connectors

More information

Ag Leader Technology Insight. Direct Command Installation Spra-Coupe 7000 Series

Ag Leader Technology Insight. Direct Command Installation Spra-Coupe 7000 Series Note: Indented items indicate parts included in an assembly listed above. Part Name / Description Part Number Quantity Direct Command Spra-Coupe 7000 Kit 4100531 1 Liquid Product Control Module 4000394

More information

GCI-5K INSTALLATION AND OPERATOR S MANUAL

GCI-5K INSTALLATION AND OPERATOR S MANUAL GCI-5K INSTALLATION AND OPERATOR S MANUAL Grid-tied inverter for wind Ningbo Ginlong Technologies 1 INTRODUCTION 2 SAFETY GUIDELINES AND WARNINGS 3 INSTALLATION 3.1 Selecting a location for the inverter

More information

OPTALIGN smart RS The Real Sense in machinery alignment

OPTALIGN smart RS The Real Sense in machinery alignment OPTALIGN smart RS The Real Sense in machinery alignment Many decades of experience in precision shaft alignment PRÜFTECHNIK Alignment Systems, the inventor of laser alignment, has many decades experience

More information

OPTALIGN smart RS5 The power of precision shaft alignment

OPTALIGN smart RS5 The power of precision shaft alignment OPTALIGN smart RS5 The power of precision shaft alignment Always one step ahead with precision shaft alignment RS5 technology 5-axis XL HD PSD Precision built-in inclinometer Ambient light compensation

More information

OPTALIGN smart RS5 The power of precision shaft alignment

OPTALIGN smart RS5 The power of precision shaft alignment OPTALIGN smart RS5 The power of precision shaft alignment Always one step ahead with precision shaft alignment RS5 technology 5-axis XL HD PSD Precision built-in inclinometer Ambient light compensation

More information

Bore Alignment. Extruder Alignment. Application Notes

Bore Alignment. Extruder Alignment. Application Notes Bore Alignment Application Notes Extruder Alignment System Recommendations L-705 Laser Borescope for Extruders L-700 Twin Barrel Extruder Alignment System The L-705 Laser Borescope Alignment System In

More information

E710 / E720. Machine Alignment and Installation THE TOTAL ALIGNMENT SOLUTION. E710 / E720

E710 / E720. Machine Alignment and Installation THE TOTAL ALIGNMENT SOLUTION.  E710 / E720 www.easylaser.com E710 / E720 Machine Alignment and Installation Laser shaft alignment systems for all important steps of machine installation. TM THE TOTAL ALIGNMENT SOLUTION E710 / E720 A PRECISION CHOICE

More information

Sentinel PRESS BRAKE GUARDING SYSTEM

Sentinel PRESS BRAKE GUARDING SYSTEM Sentinel PRESS BRAKE GUARDING SYSTEM Sentinel Sentinel is an advanced press brake guarding system designed for retrofit applications. Sentinel provides the highest level of operator protection while maintaining

More information

O T Rotating Laser Target System.

O T Rotating Laser Target System. O T - 0 0 Rotating Laser Target System. The OT-00. Portable, Accurate Measurement. The OT-00 Rotating Laser Target System, in tandem with a rotating laser, provides the fastest, most accurate way to measure

More information

FITTING TOOL SET BETEX IMPACT 33. Part No.: TB-FT

FITTING TOOL SET BETEX IMPACT 33. Part No.: TB-FT FITTING TOOL SET BETEX IMPACT 33 For safe, precise and quick mounting of bearings, bushings, sealing rings, cam wheels and pulleys the use of an Impact fitting tool set is an absolute necessity. Specially

More information

CHAPTER 3B: ELECTRONIC POWER STEERING

CHAPTER 3B: ELECTRONIC POWER STEERING Electronic Power Steering CHAPTER 3B: ELECTRONIC POWER STEERING NOTE: The basic steering system, such as the tie rod ends, drag links axles, etc., is covered in Chapter 3A: Steering. In 2012, Cub Cadet

More information

OPTALIGN smart EX Maintaining high standards in machinery alignment

OPTALIGN smart EX Maintaining high standards in machinery alignment OPTALIGN smart EX Maintaining high standards in machinery alignment Expertise in precision laser alignment For over three decades, PRÜFTECHNIK Alignment Systems has continued to develop undisputed precision

More information

Smart Door Lock. Set-Up Guide

Smart Door Lock. Set-Up Guide Smart Door Lock Set-Up Guide Thanks for choosing Rogers Smart Home Monitoring! Once you ve set-up your Smart Door Lock, the lock will allow keyless entry without sacrificing any safety. Its Touchpad makes

More information

Two-door Access Controller

Two-door Access Controller Two-door Access Controller Quick Start Guide V1.0.0 Preface Overview This document elaborates on structure, installation, interface and wiring of two-door access controller. Symbol Definition The following

More information

Wiring Instructions. Gatekeeper h4.0. Technical Support.

Wiring Instructions. Gatekeeper h4.0. Technical Support. Wiring Instructions Gatekeeper h4.0 Technical Support support@gymmastersoftware.com USA: 415 678 1270 Australia: 03 9111 0323 : 03 974 9169 Copyright 2016 Treshna Enterprises. All rights reserved. Table

More information

Product Information. RCN 6000 Absolute Angle Encoder with Integral Bearing and Large Hollow Shaft

Product Information. RCN 6000 Absolute Angle Encoder with Integral Bearing and Large Hollow Shaft Product Information RCN 6000 Absolute Angle Encoder with Integral Bearing and Large Hollow Shaft 08/2018 RCN 6000 series Absolute angle encoder with Integrated stator coupling Hollow through shaft 180

More information

flipit SFI & IFI Computer Desks

flipit SFI & IFI Computer Desks Prepared for Princess Noura Bint Abdul Rahman University A S S E M B L Y I N S T R U C T I O N S flipit SFI & IFI Computer Desks SFI-352730-K19 FI Series Student Desk flipit US Patent No. 7,784,412 www.smartdesks.com

More information

BG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c

BG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c BG 0 Spare parts list Trowel BG0 HSQP BG0 HSQP BG0 HSTP BG0 HSTP Valid from serial number BGB00000 BGB00000 BGF000000 BGF000000 0 Atlas Copco Construction Tools AB No. 900 0 0c 00 BG 0 Contents Contents

More information

UltraRack. Advanced Data Centre Enclosures SR SERIES

UltraRack. Advanced Data Centre Enclosures SR SERIES UltraRack Advanced Data Centre Enclosures SR SERIES Designed for scaleable growth The SR Series UltraRack SR Series - Universal rack enclosure solutions for advanced storage, cooling, power distribution,

More information

ERC Quick Start Guide

ERC Quick Start Guide ERC Quick Start Guide 1. Parts Confirmation Please contact your sales representative if any of these parts are missing or incorrect: - ERC Actuator: Slider type (ERC-SA6/SA7) or (ERC-RA54/RA64) - Relay

More information

SHAFT ALIGNMENT SYSTEM

SHAFT ALIGNMENT SYSTEM 1 2 Table of Contents LASE-A-LIGN Shaft Alignment System Packages...4 LASE-A-LIGN Shaft Alignment System package 89373458...4 Safety Notes...6 Operating information...7 LASE-A-LIGN Shaft Alignment System

More information

ROTALIGN Ultra. Highest standards in machinery shaft alignment

ROTALIGN Ultra. Highest standards in machinery shaft alignment ROTALIGN Ultra Highest standards in machinery shaft alignment Highest standards in machinery shaft alignment Present in all industries We care about your assets PRÜFTECHNIK Alignment Systems, the inventor

More information

DIGITAL BATTERY TORQUE WRENCH (DB-RAD) USER GUIDE

DIGITAL BATTERY TORQUE WRENCH (DB-RAD) USER GUIDE DIGITAL BATTERY TORQUE WRENCH (DB-RAD) USER GUIDE Ref: WCOI.094 Date: August 2017 Issue: 5 Page Description CONTENTS 1 Introduction 2 Training Requirements General Safety 3 Battery Pack Safety DB-RAD Wrench

More information

Work with RSS Feeds. Procedures. Add an RSS Text Object CHAPTER. Procedures, page 7-1

Work with RSS Feeds. Procedures. Add an RSS Text Object CHAPTER. Procedures, page 7-1 CHAPTER 7 Revised: November 15, 2011 s, page 7-1 s Add an RSS Text Object, page 7-1 Rename an RSS Text Object, page 7-2 Delete or Restore an RSS Text Object, page 7-4 Manipulate an RSS Text Object, page

More information

OFP401P0189. Color Sensor. Operating Instructions

OFP401P0189. Color Sensor. Operating Instructions OFP401P0189 Color Sensor Operating Instructions Last update: 23 May 2013 2 Table of contents 1. Proper Use 4 2. Safety Precautions 4 3. EC Declaration of Conformity 4 4. Technical Data 5 4.1. Connection

More information

EPS 06 in rear housing type A1

EPS 06 in rear housing type A1 Field Installation and / or Replacement of RACO Electronic Position Sensor Board EPS 02 & EPS 06 - Electronic Limit Switches - Analog Output Position Signal - Very Accurate - Easy To Use - Robust - Dependable

More information

Ultra short throw lens installation

Ultra short throw lens installation Ultra short throw lens installation The ultra short throw lens 0.36 UST GS (P/N: 140-133108-XX) allows you to position your projector as close as possible to your screen or display. Unless otherwise indicated,

More information

D45 System. Digital colour entrance panel with addresses list

D45 System. Digital colour entrance panel with addresses list D45 System Digital colour entrance panel Description Front view D45 System entrance panel with colour camera and backlighted alphanumeric keyboard equipped with pushbutton to direct calls to the porter

More information

Turbine Controller Integration

Turbine Controller Integration Turbine Controller Integration Turbine Model: GE 1.5 SLE Overview The BlueScout Optical Control System (OCS) is designed to improve turbine performance by enhancing alignment of the turbine with approaching

More information

BRx6 Sensor Calibration Using SurvCE/SurvPC

BRx6 Sensor Calibration Using SurvCE/SurvPC OVERVIEW BRx6 Sensor Calibration Using SurvCE/SurvPC The BRx6 internal sensors (tilt, accelerometer and compass) must be calibrated in order to use the electronic bubble and tilted pole corrections in

More information

Wizard PDS. Automated Perimeter Definition System. January Education and Training Center Wizard Date 5/4/2016. Page 1

Wizard PDS. Automated Perimeter Definition System. January Education and Training Center Wizard Date 5/4/2016. Page 1 PDS Automated Perimeter Definition System January 2016 Page 1 Table of Contents Information Page 3 O Page 32 Operating Procedures Basic Operation Manually Reposition a Truss Snap to Rail Centerline Flip

More information

1. Home Multiple print head XY calibration manual Downloading the XY calibration file Printing the XY calibration

1. Home Multiple print head XY calibration manual Downloading the XY calibration file Printing the XY calibration Home..................................................................................................... 2 Multiple print head XY calibration manual.........................................................................

More information

Multimedia web page Board

Multimedia web page Board Page where the users have a space (board) to create their own compositions with graphics and texts previously inserted by the author; furthermore, the users will be able to write their own texts: Multimedia

More information

INSTRUCTION. Motor operation device NM for NAL and NALF switch/switch fuse disconnector Designed for remote control.

INSTRUCTION. Motor operation device NM for NAL and NALF switch/switch fuse disconnector Designed for remote control. INSTRUCTION Motor operation device NM 24...220 for NAL and NALF switch/switch fuse disconnector Designed for remote control. Contents 1. General... 1 2. Function... 1 3. Technical data... 1 4. Mounting...

More information

TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION

TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT

More information

LABEL MATRIX TEKLYNX V E R S I O N 8 Q U I C K S T A R T G U I D E

LABEL MATRIX TEKLYNX V E R S I O N 8 Q U I C K S T A R T G U I D E TEKLYNX LABEL MATRIX V E R S I O N 8 Q U I C K S T A R T G U I D E Note Quick Start Guide The information in this manual is not binding and may be modified without prior notice. Supply of the software

More information

Contents. - i - Ver.:2

Contents. - i - Ver.:2 Contents 1 Accessories of D-Point 2... 2 2 Connecting Projector to PC... 4 3 Pen Action... 4 4 Driver Installation... 5 5 Configuration Setting... 8 6 D-Point 2 Pull-up Menu... 12 7 DT02 Multi-touch Interactive

More information

Further Information can be found at

Further Information can be found at Below is a step by step guide to assembling the Hurricane-Rig. Remember that this is a precision optical instrument. Excessive force can bend critical parts. If treated well it should give many years of

More information

Design a Simple Fan in 123D Design

Design a Simple Fan in 123D Design Design a Simple Fan in 123D Design Learn to use 123D Design to make and print this simple fan. 123D Design is a free, powerful, yet simple 3D creation and editing tool. It allows you to design and build

More information

Safety light beam Spot

Safety light beam Spot Safety light beam is a light beam mainly used for body detection. It consists of a transmitter and a receiver. Infrared light is sent from the transmitter to the receiver and when the light beam is interrupted

More information

MOSS-DVR-810 Mobile Digital SD Recorder User Manual

MOSS-DVR-810 Mobile Digital SD Recorder User Manual MOSS-DVR-810 Mobile Digital SD Recorder User Manual Before installing and using, be sure to read this Manual for best performance. ATTENTION This product is to be used within the vehicle interior. In order

More information