ELECTRICAL CONNECTORS ALL PRODUCTS

Transcription

1 ELECTRICAL CONNECTORS ALL PRODUCTS RENEWAL PARTS Supersedes: NOTHING Form RP1 (103) LD08685

2 TABLE OF CONTENTS PAGE Single Line Micropanel...3 Optiview Panels...4 VSD's and Solid State Starters...5 System Electrical Components...6 Application & Extraction Hand Tools YORK INTERNATIONAL

3 Connectors for Micropanel Control Panel Board Board Position Circuits Plug Housing p/n Pin p/n Microboard XXX J or Microboard XXX J Microboard XXX J Microboard XXX J Microboard XXX J Microboard XXX J Microboard XXX J Microboard XXX J Microboard XXX J Microboard XXX J Microboard XXX J I/O Exp. Board XXX J I/O Exp. Board XXX J I/O Exp. Board XXX J I/O Exp. Board XXX J I/O Exp. Board XXX J I/O Exp. Board XXX J I/O Exp. Board XXX J Power Supply XXX J Power Supply XXX J Power Supply XXX J Power Supply XXX J Power Supply XXX J Power Supply XXX J Level Control J Level Control J Level Control J CM-2 J CM-2 J CM-2 J Relay Output J Digital Input J Start/Stop Reset J Logic Board J Trigger Board J Dangling Door Connector Connector Door Dangling Door Connector Pin Door Dangling Door Connector Mate Door Dangling Door Connector Socket Door YORK INTERNATIONAL 3

4 Connectors for Optiview Panels Board Board p/n Position Circuits Plug p/n Pin p/n Microboard J Microboard J Microboard J Microboard J Microboard J Microboard J Microboard J CM-2 Board J CM-2 Board J CM-2 Board J I/O Board J ACC Board J ACC Board J ACC Board J ACC Board J ACC Board J ACC Board J Hot Gas By-Pass P1-P Screw Hot Gas By-Pass P Hot Gas By-Pass P Screw Digital I/O P1-P Screw Digital I/O P7 & P Terminal Block 7 Beige Feed Through Block Proximity Probe to Optiview Panel Proximity Probe P Proximity Probe J Proximity Probe Complete Assembly (includes 21 of cable) Proximity Probe, Female Mil Connector Only Attached to 21 of Cable Proximity Probe, With Male Mil Connector Only Harnesses for Optiview Panels Power Supply J Power Supply P Power Supply P Aux J Aux P Aux P Door Connr. J Door Connr. P YORK INTERNATIONAL

5 Connectors for VSD starters Board Board p/n Position Circuits Plug housing p/n Pin p/n Logic Board J Logic Board J Logic Board J Logic Board J Logic Board J Logic Board J Filter Logic Board XXX J Filter Logic Board XXX J Filter Logic Board XXX J Filter Logic Board XXX J Filter Logic Board XXX J VSD Logic Board J VSD Logic Board J VSD Logic Board J VSD Logic Board J VSD Logic Board J VSD Logic Board J n/a VSD Logic Board J n/a VSD Logic Board J n/a VSD Logic Board J n/a VSD Logic Board J Bus Isolator Board J Bus Isolator Board J SCR Trigger Board J SCR Trigger Board J SCR Trigger Board J SCR Trigger Board J SCR Trigger Board J SCR Trigger Board J SCR Trigger Board J Filter Logic Board XXX J n/a Filter Logic Board XXX J Filter Logic Board XXX J Filter Logic Board XXX J Filter Logic Board XXX J Filter Logic Board XXX J n/a Line Isolator Board J Line Isolator Board J Solid State Starters Logic/trigger XXX J Logic/trigger XXX J5 & J Logic/trigger XXX J6 thru J YORK INTERNATIONAL 5

6 System Electrical Connections Application / location Description Part Number Shielded cable at sensor end Thermistor Transducer Two pin housing for temperature thermistors Three pin housing for pressure transducers Rubber collars to fi t over wire insulation Contact receptacles (metal terminals) Two pin housing for sensor end (supplied with thermistor) Rubber collars to fi t over wire insulation (supplied with thermistor) Contact tabs (supplied with thermistor) Alternate harness end connector assembly (old style thermistors) Three pin housing for transducer (supplied with transducer) Rubber collars to fi t over wire insulation (supplied with transducer) Contact tabs (metal terminals) (supplied with transducer) Alternate harness end connector assembly (old style transducers) Miscellaneous 2-conductor shielded cable*, gray cable with foil shield & drain wire 20 AWG - for thermistors conductor shielded cable*, gray cable with foil shield & drain wire 20 AWG - for tranducers Insulated spring spade terminal for shielded cable drain wire connection to panel Insulated spring spade terminal AWG Un-insulated straight push-on connection terminal with insulation support clamp Copper ferrule splice cap for electrical connections Nylon electrical insulator for use with copper ferrule splice cap DIN plug for solenoid valve with suppressor DIN plug for solenoid valve without suppressor Diode Bridge Surge suppressor.250 VAC, 0.1 MFD, 100 ohm Varistor, metal oxide (MOV) 30 volt, 1.4 joules Varistor, metal oxide (MOV) 56 volt, 2.0 joules Varistor, metal oxide (MOV) 230 volt, 35 joules * Specify Required Cable Length in Feet When Ordering 6 YORK INTERNATIONAL

7 APPLICATION & EXTRACTION HAND TOOLS PIN CONTACTS SOCKET Use to extract metal pins and sockets from plastic housings of (Commercial Mate-N-Lok) Source 1 Part No: York Part No: Description: Commercial Mate-N-Lok Removal Tool NON - YORK APPLICATION & EXTRACTION HAND TOOLS PIN CONTACTS SOCKET Source 1 Part No: Description: Universal Mate-N-Lok Removal Tool Use to extract metal pins and sockets from plastic housings of (Commercial Mate-N-Lok) SOCKET CONTACT HOUSING PLUG Source 1 Part No: Description: Mini-Universal Mate-N-Lok Removal Tool Use to extract metal pins and sockets from plastic housings of (Commercial Mate-N-Lok) LEAF CONTACT Source 1 Part No: Description: Bifurcated Leaf Contact Removal Tool Use to extract metal pins and sockets from plastic housings of (Commercial Mate-N-Lok) YORK INTERNATIONAL 7

8 P.O. Box 1592, York, Pennsylvania USA Copyright by York International Corporation 2003 Form RP1 (103) Supersedes: NOTHING Tele Subject to change without notice. Printed in USA ALL RIGHTS RESERVED