SED2 Variable Frequency Drives

Transcription

1 May 9, 0 SED Variable Frequency Drives Description The SED variable frequency drives are designed specifically for HVA applications. The SED supports a wide variety of digital and analog I/O for diverse control capability. uilt-in PID features control pumps and fans, and an integral system protocol can interface P/N networks. Using the SED multi-level parameter access, operators can quickly pinpoint relevant data. Features uilt-in ST P and JI N (Metasys ) building automation system protocols for easy network integration LON Interface and Modbus Interface optional Low harmonics design reduces noises and interference eliminates need for filters/reactors in most installations uilt-in PID for fast and accurate pressure control Pump staging for open loop, constant pressure, and constant flow-type applications Multi-level program access elt failure detection with or without an external sensor Service mode for applications requiring continuous, uninterruptible operation Accepts a wide variety of digital and analog I/O types, including direct Ni 000 RTD sensor level inputs One common interface throughout all power ranges Optional Advanced Operator Panel for uploading/downloading parameters Full form relay contacts for digital outputs s SED IP0 and NEMA Type frame sizes and power ranges are as follows: VFD0R HP kw V 80V 575V A A SED IP5/NEMA Type frame sizes and power ranges are as follows: D D E F E F HP kw VFD0R 80V 575V D E F

2 May 9, 0 SED Variable Frequency Drives Product Numbers Your Product Number: Example Product Number: S E D / X Model SED- VFD only kw rating 0.75,.,.5,., (Uses to,, 5.5, 7.5,, 5, spaces plus 8.5,, 0, 7, 5, a divider "/") 55, 75, 90 [See Note for these selections] Voltage 00 to 0V 80 to 80V 500 to 600V NEMA rating (IP 0) NEMA Type 5 NEMA Type (IP 5) [See Note] Filter X Factory Required Designator *** leave blank *** Note: Available only with Voltage odes and. Example Shown: SED-0.75/X SED VFD only, 0.75 kw ( hp), 00 to 0V, open type IP0. Typical Specifications SED shall provide control of fan and pump HVA applications. A wide range of I/O allows for simple control solutions, with integral P and N protocols embedded for full control capabilities. Page of 7

3 SED Variable Frequency Drives Submittal Sheet May 9, 0 Technical Data Drive Specifications Input voltage and power ranges (-phase) Table. Drive Specifications. Description 08V and 0V to 0V, ac±0%. hp to 60 hp (.9 amps to 5 amps) 80V to 80V, ac ±0% hp to 5 hp (. amps to 78 amps) 500V to 600V, ac ±0% hp to 5 hp (. amps to 5 amps) Input frequency 7 Hz to 6 Hz Output frequency 0 Hz to 50 Hz Power factor 0.9 VFD degree of efficiency 96% to 97% Switch-on current Less than nominal input current Auxiliary supply V Glavanically separated, unregulated auxiliary supply (8V to V) 00 ma Overload capacity 0% for 60 seconds ontrol method Linear, parabolic and programmable V/f; and flux current control low-power mode PWM frequency k Hz to 6k Hz (adjustable in k Hz increments) Fixed frequencies 5 programmable Skip frequency bands programmable Setpoint resolution 0.0 Hz digital 0.0 Hz serial 0 bit analog Digital inputs (sink/source) 6: fully programmable and scalable isolated digital inputs, switchable Analog inputs : 0 to 0 Vdc, 0/ to 0 ma, can also be configured as digital inputs or Ni 000 input Relay outputs : configurable 0 Vdc/5A (resistive), 50 Vac/A (inductive) Analog outputs : programmable (0/ ma to 0 ma, or 0 Vdc to 0 Vdc) Serial interface RS-85 transmission rate: Up to 8.k aud Protocols: USS, P and N Protection level IP0 NEMA Type with protective shield and gland plate installed IP5/NEMA Type Temperature ranges Operating: F to 0 F ( 0 to 0 ) Storage: 0 F to 58 F ( 0 to 70 ) Humidity 95% rh, non-condensing Operational altitudes Up to 80 ft (000m) above sea level without derating Protection features Under-voltage, Over-voltage, Overload, Ground fault, Short circuit, Stall prevention, Locked motor, Motor overtemperature l t PT, Over-temperature, Parameter PIN protection. Standards UL, cul, E, -tick E conformity onformity with E Low Voltage Directive 7//EE NOTE: SED ompliance with EN6000--: From September st, 005 all electrical apparatus covered by the EM directive will have to comply with EN Limits for harmonic currents produced by equipment connected to public low voltage systems with input currents > 6A and =< 75 A per phase. Siemens variable speed drives of the product range SED (Micromaster 6) fulfill the requirements of the EN (without the need for external line reactors) regarding the THD values of Table under the pre condition of Rsce > 90. The required PWHD values will not be achieved. Due to this fact it is recommended to apply for connection approval at the local electricity board. The local electricity board will evaluate among many other data the content of the 5th harmonic current and the Line Power Factor "Lambda, which is the ratio of active power and apparent power. Siemens frequency inverters are optimized in design and operation characteristics regarding energy efficiency and less interference with line supplies. Page of 7

4 May 9, 0 SED Variable Frequency Drives Table. Output Ratings. Product Number Output Rating Voltage (±0%) IP0 NEMA Type IP5/NEMA Type HP kw 08V and 0V to 0V (-Phase) 80V to 80V (-Phase) 500V to 600V (-Phase) Output urrent Max (amps) SED-0.75/X SED-0.75/X A SED-./X SED-./X SED-.5/X SED-.5/X SED-./X SED-./X SED-/X SED-/X SED-/X SED-/X SED-5.5/X SED-5.5/X SED-7.5/X SED-7.5/X SED-/X SED-/X D SED-5/X SED-5/X D SED-8.5/X SED-8.5/X D SED-/X SED-/X E SED-0/X SED-0/X E SED-7/X SED-7/X F SED-5/X SED-5/X F SED-0.75/X SED-0.75/X A SED-./X SED-./X SED-./5X.5..0 A * SED-.5/X SED-.5/X SED-.5/5X A * SED-./X SED-./X SED-./5X SED-/X SED-/X SED-/5X SED-/X SED-/X SED-/5X SED-5.5/X SED-5.5/X SED-5.5/5X SED-7.5/X SED-7.5/X SED-7.5/5X SED-/X SED-/X SED-/5X SED-5/X SED-5/X SED-5/5X SED-8.5/X SED-8.5/X SED-8.5/5X D SED-/X SED-/X SED-/5X D SED-0/X SED-0/X SED-0/5X D SED-7/X SED-7/X SED-7/5X E SED-5/X SED-5/X SED-5/5X E SED-55/X SED-55/X SED-55/5X F SED-75/X SED-75/X SED-75/5X F SED-90/X SED-90/X SED-90/5X F SED-0.75/X SED-0.75/X SED-./X SED-./X SED-./5X.5.. SED-.5/X SED-.5/X SED-.5/5X SED-./X SED-./X SED-./5X.0..9 SED-/X SED-/X SED-/5X SED-/X SED-/X SED-/5X SED-5.5/X SED-5.5/X SED-5.5/5X SED-7.5/X SED-7.5/X SED-7.5/5X SED-/X SED-/X SED-/5X SED-5/X SED-5/X SED-5/5X SED-8.5/X SED-8.5/X SED-8.5/5X D SED-/X SED-/X SED-/5X D SED-0/X SED-0/X SED-0/5X D SED-7/X SED-7/X SED-7/5X E SED-5/X SED-5/X SED-5/5X E SED-55/X SED-55/X SED-55/5X F SED-75/X SED-75/X SED-75/5X F SED-90/X SED-90/X SED-90/5X F * IP5/NEMA Type drives start at. Page of 7

5 SED Variable Frequency Drives Submittal Sheet May 9, 0 Accessories Gland Plates (included with NEMA Type ): SED-GL-A Gland Plate, A SED-GL- Gland Plate, SED-GL- Gland Plate, Protection Shield (included with NEMA Type ): SED-PS-A Protection Shield, A SED-PS- Protection Shield, SED-PS- Protection Shield, SED-PS-DE Protection Shield, D, E Operator Panel: SED-OP SED-AOP asic Operator Panel (included with all SEDs) Advanced Operator Panel OP/AOP Door Mounting Kits: SED-DOOR-KIT OP/AOP Single Inverter Door Mounting Kit SED-DOOR-KIT AOP Multi-Inverter Door Mounting Kit LON Interface Option SED-LONI/F Modbus Interface able SED-MODUS Enables serial communication between Modbus RTU and SED SED-MODUS_KIT Use to configure SED-MODUS interface. Only one kit required per installation. Dimensions Table. Overall Dimensions for IP0 SED VFDs in Inches (Millimeters). Height Width Depth Weight lb (kg) A 6.8 (7).9 (7) 5.9 (9).9 (.) 8.0 (0) 5.9 (9) 6.8 (7) 7.5 (.) 9.6 (5) 7. (85) 7.7 (95) (5.5) D 0.5 (50) 0.8 (75) 9.6 (5) 5 (6) E 5.6 (650) 0.8 (75) 9.6 (5) (0) F.5 (850). (50).6 (0) 6 (5) Table. Overall Dimensions for NEMA Type SED VFDs Assembled with Protective Shield and Gland Plate in Inches (Millimeters). Height Width Depth Weight lb (kg) A 9. ().9 (7) 5.9 (9). (.5).8 (00) 5.9 (9) 6.8 (7) 8. (.8).8 (5) 7. (85) 7.7 (95).6 (6.) D.6 (65) 0.8 (75) 9.6 (5) 7.5 (7) E 9.7 (75) 0.8 (75) 9.6 (5) 6. () F 5.5 (8) 6.0 (06).0 (56) 00 (9) Table 5. Overall Dimensions for IP5/NEMA Type SED VFDs in Inches (Millimeters). Height Width Depth Weight lb (kg) 5. (85) 0.6 (70) 0.6 (68) 0 ().9 (606).8 (50). (8) (9) D 7.0 (685). (60).9 (5) 77 (5) E.8 (885). (60) 7.8 (5) 05 (8) F 5. (50) 7.7 (50) 8.6 (7) 78 (8) Page 5 of 7

6 May 9, 0 SED Variable Frequency Drives Wiring Diagrams AIN On = [A], 0-0 ma Off = [V], 0-0 V ON RL N RL RL NO OM RL N RL RL NO OM AIN On = [A], 0-0 ma Off = [V], 0-0 V 0 5 AOUT AOUT PT + - A PT 5 AOUT AOUT ISO V P+ N V 0V AIN + AIN - ISO V AIN + AIN - VFD007R Figure. SED ontrol Terminals. VFD00R EXTERNAL 0-0V EXTERNAL 0-0 ma - + VFD V dc Powered 0-0 ma Device (Power consumption cannot exceed 00 ma) VFD00R ma V ac Power 9 8 VFD0050R.7k OHM MINIMUM SPEED POTENTIOMETER +0 V 0 V AIN+ A/D AIN- 0 AIN+ A/D AIN- Figure. Typical Analog Inputs and. VFD009R 7 8 Figure. Typical Analog Inputs and as Digital Inputs 7 and 8. VFD005R D / A D / A + AOUT AOUT - 7 V: 0-0 V - 0 V I: 0-0mA - 0mA V: 0-0 V - 0 V I: 0-0mA - 0mA ANALOG OUTPUT r P078 Figure 5. Typical Analog Outputs and. VFD008R PNP or NPN D-ISOLATED ISOLATED + Vdc (OUTPUT) ISOLATED 0 Vdc (OUTPUT) Figure. Typical Digital Inputs through 6. VFD050R 0V, A or 0V, A 0V, A or 0V, A 0 5 RELAY OUTPUT RELAY OUTPUT Figure 6. Typical Digital Outputs and. Page 6 of 7

7 SED Variable Frequency Drives Submittal Sheet May 9, 0 Table 6. Order Worksheet. Item Quantity Designation Part Number Description Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners. 0 uilding Technologies Division 000 Deerfield Parkway uffalo Grove, IL USA Your feedback is important to us. If you have comments about this document, please send them to sbt_technical.editor.us.sbt@siemens.com. Printed in the USA Page 7 of 7