Product Catalog. Tracer Controller MP501 BAS-PRC008-EN. May 2012
|
|
- Piers Carroll
- 6 years ago
- Views:
Transcription
1 Product Catalog Tracer Controller MP501 May 2012 BAS-PRC008-EN
2 Copyright 2012 Trane. All rights reserved. This document and the information in it are the property of Trane and may not be used or reproduced in whole or in part, without the written permission of Trane. Trane reserves the right to revise this publication at any time and to make changes to its content without obligation to notify any person of such revision or change. Trademarks Trane and its logo are trademarks of Trane in the United States and other countries. All trademarks referenced in this document are the trademarks of their respective owners. Revision Summary BAS-PRC008-EN (30 May 2012) Cost Savings: Update to mount plate and metal enclosure to remove metal screw/nut and use plastic PEM nut. Change to figure illustrations. 2 BAS-PRC008-EN
3 Table of Contents Product Overview Inputs and Outputs Features Wiring Diagram Network Architecture Dimensions and Specifications Dimensions Power Operating Environment Storage Environment Agency Listings/Compliance BAS-PRC008-EN 12 Jun
4 Product Overview The Tracer MP501 controller is a configurable, multi-purpose controller used to provide directdigital control for heating, ventilation, and air conditioning (HVAC) equipment. The controller can operate as a stand-alone device or as part of a building automation system (BAS). Communication between the controller and a BAS occurs via a LonTalk Comm5 communication link. The Tracer MP501 provides a single control loop with the following output types: 2-stage, tri-state modulating, and 0 10 Vdc analog. The controller can be configured in two possible modes: Space Comfort Controller (SCC) or generic. In SCC mode, the Tracer MP501 conforms to the LonMark SCC profile and controls space temperature to an active setpoint. SCC mode supports the following applications: Heating control loop Cooling control loop Two-pipe heat/cool automatic changeover using a communicated water loop temperature In generic mode, the Tracer MP501 provides control flexibility in a variety of applications that do not necessarily follow a LonMark profile. The control loop accepts inputs of the following types: temperature, pressure, flow, percent, or parts per million (ppm). Generic mode supports many applications including: Fan speed control based on duct static pressure Pump speed control based on water differential pressure or flow Humidifier control based on space or duct relative humidity Inputs and Outputs Tracer MP501 inputs and outputs include: Analog inputs SCC mode; zone temperature, zone temperature setpoint Generic mode: 4 20 ma input Binary inputs SCC mode: 0ccupancy Generic mode: enable/disable Outputs 2-stage, tri-state modulation, or 0 10 Vdc analog SCC mode: fan on/off Generic mode: interlock device on/off (follows the enable/disable binary input) Generic point For use with a Tracer Summit building automation system: binary input (shared with occupancy/enable) Generic inputs pass information to the building automation system. They do not directly affect the operation of the Tracer MP501 outputs. 4 BAS-PRC008-EN 12 Jun 2012
5 Inputs and Outputs Features Easy Installation The Tracer MP501 is suitable for indoor mounting in a variety of locations. Clearly labeled screw terminals ensure that wires are connected quickly and accurately. A compact enclosure design simplifies installation in minimal space. Flexible Control Using a single proportional, integral, and derivative (PID) control loop, the Tracer MP501 controller controls an output based on a measured input value and a specified setpoint. The output can be configured as a 2-stage, a tri-state modulating, or a 0 10 Vdc analog signal to control to the active setpoint. Adjustable PID Loop The Tracer MP501 provides a single control loop with adjustable PID control parameters, which allows control to be customized for a variety of applications. Interoperability In SCC mode, the Tracer MP501 conforms to the LonMark SCC profile. In generic mode, the controller does not conform to a specific LonMark profile, but supports standard network variable types (SNVTs). Both modes communicate via the LonTalk protocol. This allows the Tracer MP501 to be used with a Trane Tracer Summit system as well as other building automation systems that support LonTalk. Occupied/Unoccupied Operation Available in SCC mode only, the occupancy input works with a motion (occupancy) sensor or a time clock. A communicated value from a building automation system can also be used. The input allows the controller to use unoccupied (setback) temperature setpoints. Control Interlock Available in generic mode only, the interlock input works with a time clock or other binary switching device to enable or disable the controller process. When disabled, the control output is driven to a configurable (0 100%) default condition. Continuous or Cycling Fan Operation Available in SCC mode only, the fan can be configured to run continuously or cycle on and off automatically during occupied operation. The fan will always cycle in unoccupied mode. Timed Override Available in SCC mode only, the timed override function for after-hours operation allows users to request unit operation by the touch of a button on the zone temperature sensor. The override timer is configurable with a range of minutes. Additionally, users can press the Cancel button at any time to place the unit back into unoccupied mode. Manual Output Test Pressing the Test button on the controller exercises all of the outputs in sequence. This feature is an invaluable troubleshooting tool that does not require a PC-based service tool. Peer-to-peer Communication The Tracer MP501 can share data with other LonTalk-based controllers. Several controllers can be bound as peers to share data such as setpoint, zone temperature, and heating/cooling mode. Space temperature control applications having more than one unit serving a single large space can benefit from this feature, which prevents multiple units from simultaneously heating and cooling. BAS-PRC008-EN 12 Jun
6 Wiring Diagram Wiring Diagram 2nd stage or drive closed* 1st stage or drive open* Fan (on/off) H 24 Vac N Analog output (0 10 Vdc)* GND 24V 24V 1 24V 2 24V 3 AC POWER BINARY OUTPUTS OUT GND AO STATUS LED COMM5 BI AI ZONE SENSOR SERVICE LED PIN A B A B BI 1 GND +20 AI1 SET GND ZN COMM5 LED In Comm5 communication link Out Not used Trane zone temperature sensor * Only one type of output can be used at one time (2-stage, tri-state modulation, or analog) Occupancy or generic input Comm BAS-PRC008-EN 12 Jun 2012
7 Wiring Diagram 2nd stage or drive closed* 1st stage or drive open* Interlock device (on/off) H 24 Vac N Analog output (0 10 Vdc)* GND 24V 24V 1 24V 2 24V 3 AC POWER BINARY OUTPUTS OUT GND AO STATUS LED SERVICE LED PIN COMM5 BI AI ZONE SENSOR A B A B BI 1 GND +20 AI1 SET GND ZN COMM5 LED Comm5 In communication link Out Not used } Analog input (4 20 ma) Enable/disable or generic input * Only one type of output can be used at one time (2-stage, tri-state modulation, or analog) BAS-PRC008-EN 12 Jun
8 TM Network Architecture The Tracer MP501 can operate on a Tracer Summit building automation system (refer to Figure 1 below), on a peer-to-peer network (refer to Figure 2, p. 9), or as a stand-alone device. The Tracer MP501 can be configured using the Rover service tool for Tracer controllers or any other PC-based service tool compliant with the EIA/CEA-860 standard. This tool can be connected to a communication jack on a zone temperature sensor or at any accessible location on the LonTalk Comm5 communication link. Figure 1. Tracer Summit Building Automation System and MP501. Tracer Summit PC Workstation LAN (Ethernet or ARCNET) TRA CER SUMMI T ALM PWR Building control unit (BCU) BCU TRA CER SUMMI T ALM PWR Perimeter fin tube radiation Fan controlling building pressurization LonTalk Comm5 link Zone temperature sensor. MP501 Additional LonTalk devices MP501 Additional LonTalk devices o o o TM ROVER H L PC-based service tool Fin tube with control valve Building static pressure sensor VFD Exhaust fan with variable frequency drive (VFD) 8 BAS-PRC008-EN 12 Jun 2012
9 Network Architecture Figure 2. Peer-to-peer Network and MP501. One zone temperature sensor for multiple MP501 controllers MP501 MP501 Additional LonTalk devices Multiple fan coils serving a large space Fan coil BAS-PRC008-EN 12 Jun
10 Dimensions and Specifications Dimensions Plastic Cover Model Dimensions Height: in. (137 mm) Width: in. (175 mm) Depth: 2.0 in. (51 mm) Metal Enclosure Model Dimensions Height: 9.0 in. (25 mm) Width: in. (263 mm) Depth: 2.25 in. (58 mm) 6.3 in (160 mm) in. (143 mm) 2.0 in. (51 mm) in. (137 mm) in. (175 mm) in. (175 mm) in. (48 mm) 6.5 in. (165 mm) 9.0 in. (229mm) 7.0 in. (178 mm) 9.0 in. (229 mm) in. (263 mm) with cover 1.0 in. (25 mm) 2.25 in. (58 mm) in. (260 mm) without cover 10 BAS-PRC008-EN 12 Jun 2012
11 Dimensions and Specifications Power Operating Environment Storage Environment Supply: Vac (24 Vac nominal) at 50/60 Hz Consumption: 10 VA plus 70 VA (maximum) utilization Temperature: From 32 to 140 F (0 to 60 C) Relative humidity: From 5 to 95% non-condensing Temperature: From 40 to 185 F ( 40 to 85 C) Relative humidity: From 10to 90% non-condensing Agency Listings/Compliance CE Immunity: EN :1997 CE Emissions: EN :1992 (CISPR 22) EN , EN UL/C-UL listed: Energy management system UL 94-5V (UL flammability rating for plenum use) FCC Part 15, Class A BAS-PRC008-EN 12 Jun
12 Trane optimizes the performance of homes and buildings around the world. A business of Ingersoll Rand, the leader in creating and sustaining safe, comfortable and energy efficient environments, Trane offers a broad portfolio of advanced controls and HVAC systems, comprehensive building services, and parts. For more information, visit Trane has a policy of continuous product and product data improvement and reserves the right to change design and specifications without notice Trane. All rights reserved. BAS-PRC008-EN 12 Jun 2012 Supersedes BAS-PRC008-EN 23 Aug 2010 We are committed to using environmentally conscious print practices that reduce waste.
Tracer Controls. Tracer MP501 Controller BAS-PRC008-EN. January 2005
Tracer Controls Tracer MP501 Controller January 2005 BAS-PRC008-EN Introduction The Tracer MP501 controller is a configurable, multi-purpose controller used to provide direct-digital control for heating,
More informationTracer Controls. Tracer MP.501 Controller BAS-PRC008-EN. June 2001
Tracer Controls Tracer MP.501 Controller June 2001 BAS-PRC008-EN Introduction The Tracer MP.501 controller is a configurable, multi-purpose controller used to provide direct-digital control for heating,
More informationProduct Catalog. Tracer Controls Tracer ZN517 Unitary Control BAS-PRC012-EN. August 2010
Product Catalog Tracer Controls Tracer Unitary Control August 2010 BAS-PRC012-EN Introduction The Tracer unitary controller provides digital control that is similar to that of a wall thermostat. It supports
More informationTracer Controls. Tracer ZN517 Unitary Controller BAS-PRC012-EN
Tracer Controls Tracer Unitary Controller 7 April 2003 BAS-PRC012-EN Introduction The Tracer unitary controller provides digital control that is similar to that of a wall thermostat. It supports the following
More informationTracer Controllers. Tracer MP503 Input/Output Module BAS-PRC009-EN. January 2005
Tracer Controllers Tracer MP503 Input/Output Module January 2005 BAS-PRC009-EN Introduction The Tracer MP503 input/output (I/O) module is a configurable, multi-purpose device used to provide data monitoring
More informationTracer Controllers. Tracer MP503 Input/Output Module BAS-PRC009-EN. September 2001
Tracer Controllers Tracer MP503 Input/Output Module September 2001 BAS-PRC009-EN Introduction The Tracer MP503 input/output (I/O) module is a configurable, multi-purpose device used to provide data monitoring
More informationInstallation and Operation. Tracer MP501 Controller CNT-SVX08B-EN
Installation and Operation Tracer MP501 Controller CNT-SVX08B-EN Installation and Operation Tracer MP501 Controller CNT-SVX08B-EN April 2005 CNT-SVX08B-EN Tracer MP501 Controller Installation and Operation
More informationHardware Installation. Tracer MP581 Programmable Controller CNT-SVN01C-EN
Hardware Installation Tracer MP581 Programmable Controller CNT-SVN01C-EN Hardware Installation Tracer MP581 Programmable Controller CNT-SVN01C-EN November 2005 Tracer MP581 Programmable Controller Hardware
More informationInstalling the Tracer MP503 Input/Output Module Ordering number: ,
Installing the Tracer MP503 Input/Output Module Ordering number: 4950 0490, 4950 0590 Product overview The Tracer MP503 input/output (I/O) module is a field-installed device used to monitor inputs and
More informationTAC Xenta 101-VF. 3-Speed Fan Coil Controller. TAC Xenta
TAC Xenta TAC Xenta 101-VF 3-Speed Fan Coil Controller TAC Xenta 101-VF is a zone controller intended primarily for fan coil applications with the ability to control fans with multiple speeds, with one
More informationProduct Catalog. Tracer SC System Controller For Tracer Building Automated Systems BAS-PRC031-EN. January 2011
Product Catalog Tracer SC System Controller For Tracer Building Automated Systems January 2011 BAS-PRC031-EN Copyright 2011 Trane All rights reserved This document and the information in it are the property
More informationTAC Xenta 121-FC Programmable Fan Coil Application
TAC Vista TAC Xenta 121-FC Programmable Fan Coil Application TAC Xenta 121-FC is an easily programmable controller intended for both 2-pipe and 4-pipe applications, with or without re-heat. It can be configured
More informationInstallation and Operation Tracer. MP503 Input/Output Module CNT-SVX09A-E4
Installation and Operation Tracer MP503 Input/Output Module Special Notifications Special notifications Warnings, Cautions, Important statements, and Notes appear at appropriate locations throughout this
More informationTAC Xenta 121-HP Programmable Heat Pump Application
TAC Vista TAC Xenta 121-HP Programmable Heat Pump Application TAC Xenta 121-HP is an easily programmable controller intended for heat pumps, with or without re-heat. It can be configured for use with 1,
More informationWSHP-IOP-2 May Installation, Operation, and Programming. Tracer ZN510 Controller
WSHP-IOP-2 May 1998 Installation, Operation, and Programming Tracer ZN510 Controller Literature History The Trane Company has a policy of continuous product improvement and it reserves the right to change
More informationViconics VT76x6W Water-source Heat Pump Controllers Engineering Guide Specification
Viconics VT76x6W Water-source Heat Pump Controllers Engineering Guide Specification General The VT76xxW series is designed for single-stage and multi-stage control of water source heat pumps with dedicated
More informationSuitable for a wide range of installations with wall-mount, flush-mount and hand-held remote control options.
TUC03 Configurable Terminal Unit Controller Product Bulletin The TUC03 Configurable Terminal Unit Controller is designed specifically to provide direct digital control of terminal unit applications with
More informationField selectable application type and room module series, via dip-switches on controller
TUC03 Plus Configurable Terminal Unit Controller Product bulletin The TUC03 Plus configurable Terminal Unit Controller is specifically designed to provide an improved BACnet integration. It allows the
More informationUNT1100 Series. Binary Output Jumpers AO2 AO1 AO3 AO4 AOCM AOCM AOCM AOCM AO1. AI Switches Job Information N2 Address. Ref N2+ N2- ADDR 0 = ALL OPEN
1 2 8 4 AI6 R R Installation Bulletin UNT1100 Issue Date 0309 UNT1100 Series Introduction The Unitary (UNT) controller (UNT1100 Series) is a digital controller with applications for air handling units,
More informationSiemens BACnet Programmable TEC Dual Duct Two Air Velocity Sensors Controller
Technical Specification Sheet Document No. 149-851 September 24, 2014 Siemens BACnet Programmable TEC Dual Duct Two Air Velocity Sensors Controller The Siemens BACnet PTEC Dual Duct Controller provides
More informationTemperature controller Ducted systems
2 725 Temperature controller Ducted systems Standard model without zoning functions RRV851 Multifunctional controller used for central control of ducted HVAC systems in combination with a QAX850 master
More informationLN Series Remote Input/Output (I/O) Modules
LN Series Remote Input/Output (I/O) Modules Product Bulletin LN-IO301-1, LN-IO401-1, LN-IO520-1 Code No. LIT-12011316 Issued June 5, 2012 Supersedes November 9, 2007 The LN Series Remote Input/Output (I/O)
More informationSiemens BACnet Programmable TEC Constant Volume
Technical Specification Sheet Document No. 149-852 September 24, 2014 Siemens BACnet Programmable TEC Constant Volume Returns from power failure without operator intervention. No calibration required,
More informationBACnet Terminal Box (VAV) Controller
Technical Specification Sheet May 30, 2012 BACnet Terminal Box (VAV) Controller Figure 1. BACnet Terminal Box Controller. The BACnet Terminal Box Controller (Figure 1) provides high performance Direct
More informationSiemens BACnet Programmable TEC Unit Conditioner Controller
Technical Specification Sheet Document No. 149-831 September 24, 2014 Siemens BACnet Programmable TEC Unit Conditioner Controller Returns from power failure without operator intervention. No calibration
More informationSiemens BACnet Programmable TEC Unit Conditioner (Fan Coil) Controller for Smoke Control
Technical Specification Sheet Document No. 149-844 August 12, 2011 Siemens BACnet Programmable TEC Unit Conditioner (Fan Coil) Controller for Smoke Control Returns from power failure without operator intervention.
More informationFCU-4 FAN COIL CONTROLLER
FCU-4 FAN COIL CONTROLLER BACnet Enabled Description The FCU-4 is designed to provide complete control of fan coil units. The FCU-4 incorporates all the inputs and outputs to ensure that this advanced
More informationECP-VAV Series. ECP-VAV Series. 10-Point Single Duct VAV / VVT Free Programmable Controller. Applications. Features
ECP-VAV Series 10-Point Single Duct VAV / VVT Free Programmable Controller Applications Designed to meet the requirements of single duct variable air volume (VAV) or variable volume according to temperature
More informationSE7600E Series Application Guide
Schneider Electric SE7600E Series RTU Controller with IAQ Control Application Guide CONTENTS Solution Overview 2 Product Overview 3 Features & Benefits 3 System Overview & Architecture 4 Models Available
More informationM1000 INTELLIGENT ZONE CONTROL SYSTEM
HARDWARE GUIDE DIMENSIONS & SPECIFICATIONS REV. 5.2 M1000 INTELLIGENT ZONE CONTROL SYSTEM ROOFTOP CONTROLLER 2 Table of Contents GENERAL INFORMATION... 3 PL-M1000 Rooftop Controller...3 Description...3
More informationDatasheet ECB /6. BACnet B-ASC 10-Point Programmable Controller. Overview
Datasheet ECB-103 BACnet B-ASC 10-Point Programmable Controller Overview Applications Meets the requirements of the following applications: Fan Coil Units Heat Pumps Unit Ventilators Chilled Ceilings Improves
More informationSiemens BACnet Programmable TEC Unit Vent Controller
Technical Specification Sheet Document No. 149-833 August 12, 2011 Siemens BACnet Programmable TEC Unit Vent Controller The Siemens BACnet PTEC Unit Vent Controller provides high performance Direct Digital
More informationSiemens BACnet Programmable TEC Unit Conditioner (Fan Coil) Controller
Technical Specification Sheet Document No. 149-831 August 12, 2011 Siemens BACnet Programmable TEC Unit Conditioner (Fan Coil) Controller No calibration required, thereby reducing maintenance costs. PID
More informationUser Guide. FreeCool : Free Cooling unit V1.1 ENGY-SVU001A-GB
User Guide FreeCool : Free Cooling unit V1.1 ENGY-SVU001A-GB Table of Contents Introduction...3 General features...4 User interface...5 Top display area... 5 Bottom display area... 5 Main display area...
More informationExactLogic BACnet Communicating Zone Damper EXL01710 Sequence Datasheet
ExactLogic BACnet Communicating Zone Damper EXL01710 Sequence Datasheet DataSheet ev 1.12.302/4.3 October 27, 2014 Operating Sequence Standard Occupied During normal occupied operation the display will
More informationTC-9102 Terminal Controller
Metasys Network Sales Resource Manual 635 Application Specific Controllers Section Product Bulletin Issue Date 1095 TC-9102 Terminal Controller The TC-9102 Terminal Controller, the latest addition to the
More informationExactLogic BACnet Communicating Pressure Dependent VAV Damper Control with Heat EXL01820 Sequence Datasheet
ExactLogic BACnet Communicating Pressure Dependent VAV Damper Control with Heat EXL01820 Sequence Datasheet DataSheet ev 1.12.307/4.0 June 14, 2018 Operating Sequence Standard Occupied During normal occupied
More informationSiemens BACnet Programmable TEC Dual Duct Two Air Velocity Sensors Controller
Technical Specification Sheet Document No. 149-851 August 12, 2011 Siemens BACnet Programmable TEC Dual Duct Two Air Velocity Sensors Controller The Siemens BACnet PTEC Dual Duct Controller provides high
More informationSE7600E Series Application Guide
SE7600E Series Application Guide Schneider Electric SE7600E Series RTU Controller with IAQ Control Application Guide CONTENTS Solution Overview 2 Product Overview 3 Features & Benefits 3 System Overview
More informationECON-ZIP-BASE. ZIP Economizer Base Unit. Wiring Diagram USA CANADA LATIN AMERICA / CARIBBEAN
ECON-ZIP-BASE ZIP Economizer Base Unit 24 VAC ± 20%, 50/60 Hz; Class 2 power source 4 VA Base Control (ECON-ZIP-BASE) 5.5 VA Base Control with Energy Module (ECON-ZIP-BASE + ECON-ZIP-EM) Power Consumption
More informationTHERMOSTATS & CONTROLLERS
DESCRIPTION The Belimo ZIP Economizer Series saves energy in buildings by using cool outside air as a means of cooling the indoor space. This application can drastically reduce HVAC energy costs while
More informationFCU-4 FAN COIL CONTROLLER
FCU-4 FAN COIL CONTROLLER BACnet Enabled Description The FCU-4 is designed to provide complete control of fan coil units. The FCU-4 incorporates all the inputs and outputs to ensure that this advanced
More informationLX Series Free Programmable LX-PRG6x0-11 Controllers and LX Series Input/Output (I/O) Extension Modules
LX Series Free Programmable LX-PRG6x0-11 Controllers and LX Series Input/Output (I/O) Extension Modules Product Bulletin LX-PRG600-11, LX-PRG610-11, LX-IOE400-0 LX-IOE410-0, LX-IOE420-0 Code No. LIT-12011854
More informationSiemens BACnet Programmable TEC VAV with Series Fan and 3-Stage Electric Heat Controller
Technical Specification Sheet Document No. 149-834 August 23, 2010 Siemens BACnet Programmable TEC VAV with Series Fan and 3-Stage Electric Heat Controller The Siemens BACnet PTEC VAV with Series Fan and
More informationFast Route to Reliable Energy Savings ZIP Economizer
Fast Route to Reliable Energy Savings ZIP Economizer LCD Display Automotive quality, easy-to-read display allows easy verifi cation of set values and real time operating information Alarm Notification
More informationSiemens BACnet Programmable TEC Unit Vent Controller for Smoke Control
Technical Specification Sheet Document No. 149-841 August 12, 2011 Siemens BACnet Programmable TEC Unit Vent Controller for Smoke Control The Siemens BACnet PTEC Unit Vent Controller provides high performance
More informationLX Series Free Programmable Controllers
Code No. LIT-1900565 Issued November 5, 2012 LX-PRG203-1, LX-PRG300-1, LX-PRG4x0-1, LX-PRG5x0-1 LX Series Free Programmable Controllers Description The LX Series Free Programmable Controllers are microprocessor-based
More informationPre-programmed room controller with display and communication
revision 01 2014 RC-C3DOC Pre-programmed room controller with display and communication RC-C3DOC is a complete pre-programmed room controller from the Regio Midi series intended to control heating, cooling
More informationDatasheet ECB /6. BACnet B-ASC 10-Point Programmable Controller. Overview
Datasheet BACnet B-ASC 10-Point Programmable Controller Overview Applications Meets the requirements of the following applications: Fan Coil Units Heat Pumps Unit Ventilators Chilled Ceilings Improves
More informationUnderfloor Controllers
Price Underfloor Controllers work with the entire line of Price Diffusers and Terminal Units. The whole system can be easily integrated with plug-and-play connections and BACnet communication. With a full
More informationAndover ContinuumTM. b3850 Series Terminal Controllers
TM b3850 Series Terminal Controllers The TM b3850 series controllers are native BACnet controllers that communicate on an RS-485 field bus as Master devices using the MS/TP BACnet protocol. 02 Features
More informationRWD68U Universal Controller
Document No. 155-738 RWD68U Universal Controller Description Features Product Number The Universal Controller is intended for heating, air conditioning, ventilation and refrigeration in comfort control
More informationRoom Temperature Controller
3 023 Room Temperature Controller for four-pipe fan coil units RCC30 Outputs for on / off valve actuators Outputs for three-speed fan Control depending on room or return air temperature Operating modes:
More informationAndover ContinuumTM Infinet II
Andover ContinuumTM Infinet II i2850 Series The i2850, i2851, and i2853 controllers provide cost-effective DDC control of individual terminal units (e.g. VAV boxes, fan-powered induction units, unit ventilators,
More informationFeatures and Benefits of XeteX Controls. Other Unit Control Functions. Energy Recovery Functions
Controls Guide for XeteX Units Beyond meeting the typical specification and performance requirements, controlling the equipment is usually the most important success factor for HVAC projects. XeteX provides
More informationTemperature Controller (Heat Pumps)
3 347 Temperature Controller (Heat Pumps) For comfort control in HVAC & R systems Standalone electronic controller Programmable controller with preconfigured applications Three universal inputs for Ni1000,
More informationLN Series Free Programmable LN-PRG6x0-12 Controllers and LN Series Input/Output (I/O) Extension Modules
LN Series Free Programmable LN-PRG6x0-12 Controllers and LN Series Input/Output (I/O) Extension Modules Product Bulletin LN-PRG600-12, LN-PRG610-12, LN-IOE400-0 LN-IOE410-0, LN-IOE420-0 Code No. LIT-12011800
More informationBACnet Product Overview
BACnet Product Overview Comfort and energy-saving of a HVAC system are all about control. With networking devices, you can monitor and control your equipment via a communication system anywhere and anytime
More informationAndover ContinuumTM b3865/866 VAV Controllers with Built-in Actuator
Andover ContinuumTM b3865/866 VAV Controllers The Andover Continuum TM b3865 and b3866 are native BACnet controllers that communicate on an RS-485 field bus as Master devices using the MS/TP BACnet protocol.
More informationoom Pressurization Con
Technical Specification Sheet Rev. 3, December, 1998 Room Pressurization Controllers equipment. This approach to room control includes the following features. Features gure 1. Roo oom Pressurization Con
More informationDual Duct Controller - One Air Velocity
Technical Specification Sheet Rev. 4, December, 1998 Dual Duct Controller - One Air Velocity Sensor gure 1. Dual Duct Con ontr troll ller One Air Velocity Sen ensor. The Dual Duct Controller (re 1) is
More informationSatchwell MicroNet. Building Management System MicroNet 50 Series
Satchwell MicroNet Building Management System MicroNet 50 Series MicroNet 50 Series THE NEW GENERATION OF MICRONET SOLUTIONS MicroNet is an easy-to-use, scaleable and modular building automation system
More informationAndover Continuum Infinet II i2865/866 VAV Controllers with Built-in Actuator
Andover Continuum Infinet II i2865/866 VAV Controllers with Built-in Actuator The i2865 and i2866 are unique, low-cost VAV box controllers that come equipped with a built-in actuator to streamline hardware
More informationQUICK START GUIDE M2000 SERIES rue Charles, Suite 100, Mirabel, QC, J7J 1X9
QUICK START GUIDE M2000 SERIES www.proloncontrols.com info@proloncontrols.com 17 510 rue Charles, Suite 100, Mirabel, QC, J7J 1X9 REV.2.0 PL-QCK-M2000-EN Copyright 2018 Prolon. All rights reserved. No
More informationBACnet. b3867 Terminal Controllers
BACnet b3867 Terminal Controllers The Andover Continuum TM b3867 is a native BACnet controller that communicates on an RS-485 field bus as a Master device using the MS/TP BACnet protocol. 02 Features Product
More informationVZ7000 Series. BACnet Commercial Zoning System
VZ7000 Series BACnet Commercial Zoning System A cost-effective, scalable zoning system for the commercial market that delivers unparalleled flexibility via the open BACnet communication protocol. VZ7000
More informationOnboard Inputs and Outputs. Remote User Interface. Integral LCD User Interface
Product Bulletin: FX06 Field Controller Issue Date: March 2006 FX06 Field Controller The FX06 is a compact field controller in the Facility Explorer range of products. The controller is designed specifically
More informationECP-PTU Series. ECP-PTU Series. 14-Point High-Voltage Programmable Power Terminal Unit Controller. Applications. Features
ECP-PTU Series 14-Point High-Voltage Programmable Power Terminal Unit Controller Applications Control of equipment such as: roof top units, fan coils, heat pumps, ventilator units, terminal units, lighting
More informationclarity 3 Programmable Controller
clarity 3 Programmable Controller BACnet General Purpose Controllers (B-AAC) DESCRIPTION Taco Clarity 3 FPC series controllers are designed to control building systems and HVAC equipment. The integrated
More informationTLR-D42 with OPA-D42 Intelligent PI fan coil controller for modulating actuators. Cabinet mounted base, wall mounted operation terminal.
TLR-D42 with OPA-D42 Intelligent PI fan coil controller for modulating actuators. Cabinet mounted base, wall mounted operation terminal. Features Temperature control for 2-pipe and 4-pipe fan coil systems.
More informationBACnet Lab and Pressurized Room Controllers with Off-board Air Modules
Technical Specification Sheet Document No. 149-855 October 5, 2012 BACnet Lab and Pressurized Room Controllers with Off-board Air Modules Off-board Air Module Figure 1. Lab Controller Module. The OAM (Figure
More informationTrane Controls. Smart Solutions for Smart Buildings
Trane Controls Smart Solutions for Smart Buildings Experience and Application Knowledge The Trane Advantage With over 35 years of experience in the controls industry and over 100 years of accumulated knowledge
More informationLX Series Remote Input/Output (I/O) Controller
LX Series Remote Input/Output (I/O) Controller Product Bulletin LX-IO520-1, LX-IO401-1, LX-IO301-1 Code No. LIT-12011491 Issued June 22, 2009 The LX Series Remote Input/Output (I/O) controller extends
More informationFree Energy Band RCC30U Room Temperature Controller for Four-pipe Fan Coil Unit
Document No. 155-324 Free Energy Band RCC30U Room Temperature Controller for Four-pipe Fan Coil Unit Description Features Application Product Number Room temperature controller for four-pipe fan coil units.
More informationZone Pressure Touch (ZPT) Sensor - Standard Range
Product Identification BAPI s Touch Pressure Sensor is an accurate, rugged and economical solution for measuring and reporting duct/ building static pressure, room-to-room differential pressure or air
More informationProduct Data. Features/Benefits. 50RLP Water Source Heat Pumps System Control Panel
Product Data 0RLP Water Source Heat Pumps System Control Panel TM Single packaged system control panel for use with Aquazone water source heat pumps in stand-alone or direct digital control applications
More informationRichmond Heights. Smart Wi-Fi Capacitive Touch With Dual Protocols Universal Controller. Go Green
Richmond Heights Smart Wi-Fi Capacitive Touch With Dual Protocols Universal Controller Presentation Agenda 1. Introduction To Richmond Heights 2. Smart Universal Controller Features Of DAS-G01 3. DAS-G01
More informationDUKE UNIVERSITY DESIGN & CONSTRUCTION STANDARDS
1 25 95 00 Integrated Automation Control Sequences for HVAC GENERAL The HVAC operational sequences in this guideline are commonly used by Duke University. They are being provided as a preferred design
More informationSiemens BACnet VAV Actuator
Technical Specification Sheet Document No. 149-481 May 30, 2012 Siemens BACnet VAV Actuator Setpoints and control parameters assigned and changed locally or remotely. Setpoints and control parameters stored
More informationCTR21, CTR22, CTR23, and CTR24 Wall Modules
CTR21, CTR22, CTR23, and CTR24 Wall Modules FEATURES SPECIFICATION DATA The CTR21, CTR22, CTR23, and CTR24 family of wall modules include: Models with setpoint adjustment. Models with occupied/unoccupied
More informationECON-ZIP-BASE. ZIP Economizer Base Module
ECON-ZIP-BASE ZIP Economizer Base Module You can mount the ZIP Economizer in any orientation; it is recommended that you mount it in a position that will allow full utilization of the LCD and key pad and
More informationIntroduction. To use Carrier wireless sensors, you must have: A i-vu v6.5 or later system v6-00 or later drivers
Wireless Sensor CARRIER CORPORATION 2017 A member of the United Technologies Corporation family Stock symbol UTX Catalog No. 11-808-583-01 6/2/2017 Verify that you have the most current version of this
More informationUniversal Controller
3 342 Universal Controller For comfort control in HVAC & R-Systems Standalone electronic universal controller with P or PI response Operating voltage in accordance to type AC 24 V Control application selectable
More informationRoom controller STRA-17
Room controller STRA-17 Application example Room 2 Room 3 Room 4 SCADA EXOline alt. RS485 Modbus Transformer STRZ-24 (Required component) STRA-17 is a preprogrammed room controller intended to control
More informationZone Pressure Touch Sensor - Standard Range
Overview The Zone Pressure Touch (ZPT) Sensor is an accurate, rugged and economical solution for measuring and reporting duct/ building static pressure, room-to-room differential pressure or air velocities/volumes.
More informationRC-CDTO. Pre-programmed room controller with display, communication and three-point control
revision 02 2016 RC-CDTO Pre-programmed room controller with display, communication and three-point control RC-CDTO is a complete pre-programmed room controller from the Regio Midi series intended to control
More informationSubmittal Data Sheet intelligent Touch Manager DCM601A71
For use with the following VRV Models: FXAQ, FXDQ, FXEQ, FXFQ, FXHQ, FXLQ, FXMQ, FXMQ_MF, FXNQ, FXTQ, FXUQ, FXZQ, VAM For use with the following Daikin SkyAir Models: FAQ, FBQ, FCQ, FHQ, FTQ Capacity:
More informationDescription. descriptors, makes set-up and monitoring very user friendly.
Description The Meridian CV & CV-EX Control Systems are designed as an alternative to multiple programmable thermostats or expensive building automation systems in facilities that have unitary type, HVAC
More informationAndover ContinuumTM Infinet II
Andover ContinuumTM Infinet II i2920 System Controllers The Andover Continuum Infinet II i2920 System Controller is designed to meet the needs of your most demanding control and monitoring applications
More informationMicroTech II Vertical Self-contained Systems Unit Controller
Installation and Maintenance IM-710 Group: Applied Systems Part Number: IM710 Date: February 2002 MicroTech II Vertical Self-contained Systems Unit Controller Used with McQuay models: SWP and SWT BACK
More informationTAC Xenta 301. Controller, Freely Programmable
TAC Xenta TAC Xenta 300 Controller, Freely Programmable TAC Xenta 300 belongs to a family of freely programmable controllers designed for small and medium-sized heating and air handling systems. A TAC
More informationTALON Network Manager- 2 & 6 Express
Technical Specification Sheet October 30, 2010 TALON Network Manager- 2 & 6 Express Description The TALON Network Manager-2 & 6 Express (TNM-2 XPR and TNM-6 XPR) is an embedded controller/server platform
More informationRoom Temperature Controllers
3 021 Room Temperature Controllers for two-pipe fan coil units RCC10 Output for on / off valve actuator Outputs for three-speed fan Control depending on the room or return air temperature (RCC10) Automatic
More informationLONMARK Certified Powered Fan Coil Configurable Controllers. Overview
Datasheet RCL-PFC Series LONMARK Certified Powered Fan Coil Configurable Controllers Overview Applications Meets the requirements of the following applications: Fan Coil Units Unit Ventilators Chilled
More informationSEZ7000 Series. Wireless Commercial Zoning System
SEZ7000 Series Wireless Commercial Zoning System A cost-effective, scalabe zoning system for the commercial market that delivers unparalleled flexibility via the ZigBee communication protocol. SEZ7000
More informationBT300 HVAC Drives. Designed for HVAC. Description. Technical Specification Sheet Document No March 4, 2013
Technical Specification Sheet Document No. 149-711 March 4, 2013 BT300 HVAC Drives Designed for HVAC Figure 1. BT300 HVAC Drive without and with Integral Disconnect. Description Siemens Industry's BT300
More informationMaster room unit for RRV controllers
2 722 Master room unit for RRV controllers 2 wire bus connection QAX850 Multifunctional, digital room unit for installer and end-user interface with RRV controllers. Use Use Application Room unit in combination
More informationOP10. Pre-programmed, configurable controller for simple applications
revision 10 2013 OP10 Pre-programmed, configurable controller for simple applications The Optigo OP10 range of controllers can be set to handle everything from temperature or humidity control to control
More informationExactLogic BACnet Communicating Thermostat EXL01816 Sequence Datasheet
ExactLogic BACnet Communicating Thermostat EXL01816 Sequence Datasheet DataSheet ev 1.12.307/4.0 Jun 20, 2018 Operating Sequence Standard Occupied During normal occupied operation the display will show
More informationTstat8. Bacnet Thermostat
Tstat8 Bacnet Thermostat This full-featured thermostat is designed for cooling and heating systems in residential and commercial buildings. The thermostat can be configured for use with air handlers, fan
More information