Operator Interface Business

Size: px

Start display at page:

Download "Operator Interface Business"

Howard Lester
6 years ago
Views:

1 Electrical Operator Interface Business 811 Green Crest Dr. Columbus, OH Tel: Fax: Toll free: COMMERCIAL TOPICS Operator Interface Business Frequently Asked Questions for PanelMate epro ES 1. What is PanelMate epro ES? The PanelMate epro ES is a new family of Operator Interface products. The first family member introduced is a 6 model (5.7 STN display). The unit features a compact size, touchscreen interface, color graphics, an onboard Ethernet communication port, and OPC Client/Server support. 2. What is the Catalog Number of the PanelMate epro ES? The PanelMate epro ES is Catalog number 7475T What software is used to create and edit pages for the PanelMate epro ES? The epro Canvas development software is used to build and edit pages and to configure unit information for the PanelMate epro ES. This software package provides an editing environment that delivers state-of-the-art features. The epro Canvas development software is included in the epro Software Suite (Cat # CANVAS) along with ES runtime software and supporting OPC server / drivers. 4. Is the PanelMate epro ES available in stainless steel? No. The PanelMate epro ES is not available in stainless steel. The unit is rated for NEMA 4 / IP65 installations when properly mounted in a correspondingly rated enclosure. 5. Can I customize the front panel of the PanelMate epro ES? No. The front panel of the PanelMate epro ES is Cutler-Hammer dark-gray. There are no markings on the front panel. Custom labels or silkscreens are not intended to be used on the front panel. 6. Is there an adapter plate available for installing a PanelMate epro ES into the cutout for a PanelMate 1000? Yes. A new adapter plate with Catalog number APPM1ES6 is available for mounting a PanelMate epro ES into a cutout for a PanelMate Is there a trade up program for PanelMate 1000 to PanelMate epro ES users? No. There are no trade-up programs for the PanelMate epro ES. Contact your local Eaton Electrical Distributor for support with special PanelMate 1000 upgrade sales situations. 8. Can I use the communication cables sold for use with the PanelMate Power Pro and PanelMate 1000 units? In most cases. The RS232 serial cables can be used with the PanelMate epro ES. A DB9 (F) / DB9 (F) port converter (gender changer) is required to convert one of the cable s DB9 (M) connector to a DB9 (F) connector so that it can attach to the DB9 (M) connectors on the PanelMate epro ES. Page 1 of 5 OI Business PanelMate epro ES FAQs PA E

2 9. Can I get the epro ES product manual in hard copy form from Eaton Electrical? No. The PanelMate epro ES hardware manual is supplied on CD-ROM with each PanelMate epro ES unit. The manual will also be posted on the Eaton Electrical Internet site. The manual is copyrighted but users can make copies of the electronic files for their personal use only. 10. Is the backlight field replaceable on the PanelMate epro ES? No. The bulb-life is 20,000 hours typical. The unit will need to be returned to have the bulb replaced. The end-user can extend the bulb life by turning the bulb off when not in use. There is a feature on the PanelMate epro ES where the backlight can be turned off automatically after a selected time of inactivity. 11. Are there any special introductory promotions available? Yes. For a limited time a PanelMate epro ES Customer Starter Kit will be available for end-user purchase at a discounted price. The kit includes one PanelMate epro ES unit (Catalog Number 7475T-6), one epro Canvas Software Kit (Catalog Number CANVAS) and one pre-wired power supply (only available with the Starter Kit). The Catalog Number of the Customer Starter Kit is EPROES6CSK. This introductory promotion will be limited to one Starter Kit per customer. Contact your local Eaton Electrical Distributor for details. 12. What kind of support is available? Standard support is available by calling your local Eaton Electrical Distributor or the OI Business Technical Support and Services Group at , 5. TECHNICAL TOPICS 13. What power supply should be used with the 7475T-6? The PanelMate epro ES 7475T-6 voltage specification is 24 VDC 15% / + 15% with power consumption of 15 Watts, current of 1.5 Amps and peak inrush current of 7 Amps. Any power source or AC to DC power conversion module meeting these specifications will be appropriate. The power conversion module with Catalog Number 1219B converts 115 /230 VAC to 24 VDC and is recommended for use with the 7475T What communication drivers are available for use with the PanelMate epro ES? At initial release, the following OPC servers/drivers are available for use with the PanelMate epro ES. More drivers will be added in the future. These supported KEPServer_ePro OPC servers/drivers are provided with the epro Software Suite. Allen-Bradley DF1 Serial, Ethernet, ControlLogix Ethernet (Ethernet/IP) AutomationDirect DirectNET, EBC, ECOM Cutler-Hammer Serial (D50/D300) GE Fanuc Ethernet, Ethernet Global Data (EGD), SNP, SNPX Mitsubishi A Series, Ethernet, FX, FX Net Modicon Modbus ASCII Serial, Modbus Ethernet, Modbus RTU, Modbus RTU Unsolicited Omron FINS Ethernet, FINS Serial Omron Host Link, Process Suite Siemens S5, S7 200, S7 200/300/400 TCP/IP Ethernet, S7 MPI (requires MPI to serial adapter) Simatic 505 Ethernet, 505 Serial SIXNET EtherTRAK I/O Square D SY/MAX Telemecanique Uni-Telway TIWAY Host Adapter User Configurable (UCON) driver for non-standard Ethernet and Serial protocols Page 2 of 5 OI Business PanelMate epro ES FAQs PA E

3 15. How many OPC drivers can I use simultaneously on the PanelMate epro ES? You can use 2 OPC drivers simultaneously on the PanelMate epro ES. 16. What Industrial Network interface cards can I use with the PanelMate epro ES? All PanelMate epro ES units come with an Ethernet 10Base-T port and 2 physical (3 logical) serial ports (2 RS232 and 1 RS485) connections for communications. High-speed network interface cards (NICs) such as Modbus Plus and Data Highway Plus are not supported by the PanelMate epro ES. All PanelMate epro ES communications are done using the provided KEPServer_ePro OPC servers/drivers for either serial or Ethernet protocols. Virtually all PLC s that communicate on Modbus Plus or Data Highway + networks can also be accessed through their local serial ports so a simple RS232 or RS485 connection is available for epro ES communications. If you need to network to multiple PLC s in this case, you can use a serial to Ethernet converter at each PLC s serial port and create a local Ethernet network. Then use the KEPServer_ePro Allen Bradley or Modicon serial drivers with Ethernet encapsulation enabled to communicate to the epro ES via that local Ethernet network. There are a number of suppliers of low cost serial to Ethernet converters (Digi, Lantronix, Sixnet, etc.) and because the KEPServer_ePro driver performs Ethernet encapsulation of the serial protocol you can use the simple converter models rather than the more expensive models that would otherwise be required to perform protocol conversion. In most cases the extra cost of an Ethernet switch and cabling will be more than offset by the savings of the serial to Ethernet converter over the cost of a proprietary Modbus Plus or DH+ network adapter for each epro ES unit. 17. Can I communicate to an Allen Bradley PLC using DH-485? Yes, but you must go through a RS232 to DH-485 converter such as the Allen Bradley K3 module. This is different from a commercially available RS232 to RS485 converter since the K3 module also performs protocol conversion from serial DF1 to DH Can I develop and/or edit epro Canvas data on the PanelMate epro ES? No. The epro Canvas development software runs on a computer with Microsoft Windows XP or Windows 2000 Operating Systems and does not run on the PanelMate epro ES. 19. Can I run 3 rd party software (not supplied by the OI Business) on the PanelMate epro ES? No. Only applications developed by the epro Canvas software and the PanelMate epro ES Runtime software and provided KEPServer_ePro OPC servers/drivers can be used on the PanelMate epro ES. 20. How many pages can I have in an epro ES configuration? There is no fixed limit to the number of pages built using the epro Canvas software. Typical users will have less than 10 average-sized pages configured for each PanelMate epro ES 7475T-6 unit. 21. How many controller references can I have in an epro ES configuration? There is no fixed limit to the number of controller references included in a configuration. Typical users will have less than 100 data references configured for each PanelMate epro ES 7475T-6 unit. 22. What type of memory is used on the 7475T-6 models? There is internal Flash memory that is used to store the operating system and support files and there is a removable CompactFlash memory card that is used to store the PanelMate epro ES Runtime software and application files. RAM memory is used for software execution. No rotating or magnetic media is used. Page 3 of 5 OI Business PanelMate epro ES FAQs PA E

4 23. Can I add more memory to my epro ES unit? No. PanelMate epro ES memory is not expandable at this time. 24. Can I use my own CompactFlash memory card with the PanelMate epro ES? No. To ensure product integrity you should only use the 16MB CompactFlash memory card supplied with the 7475T-6 unit. 25. Can I remove or insert the CompactFlash memory card while the 7475T-6 is running? No. The CompactFlash memory card should not be removed or inserted while the 7475T-6 is running. The unit should be turned off before removing or inserting the CompactFlash memory card in order to protect the integrity of the CompactFlash. 26. What happens if I remove the CompactFlash memory card from one epro ES unit and insert it in another epro ES? The CompactFlash memory card is used to store the PanelMate epro ES runtime software, OPC server/drivers and application files. The files will move with the CompactFlash memory card. Some hardware specific information is also stored on the CompactFlash memory card which may require adjustment when placed in another unit. 27. What Operating System is used on the PanelMate epro ES? The PanelMate epro ES utilizes technology based on the Microsoft Windows CE.net Operating System. However, the unit is an operator interface NOT a general purpose Windows CE PC. 28. What are the mounting ratings of the PanelMate epro ES? The PanelMate epro ES is rated for NEMA 4 and IP65 installations when mounted in a correspondingly rated enclosure. 29. What certifications does the PanelMate epro ES have? The PanelMate epro ES 7475T-6 models have CE and FCC Class B certifications. The initial release of the 7475T-6 models are not UL, cul, CSA or Class I, Div 2 certified. 30. What ports are on the 7475T-6? The 7475T model has 1 PS2 mouse port, 1 PS2 keyboard port, 1 Ethernet 10Base-T port, and 2 DB9 (M) serial ports. The first port is for COM1 (RS232) and the second port has signals for COM2 (RS232) and COM3 (RS485) simultaneously. The Type B USB port on the unit is reserved for future use and is not functional in the initial release of hardware. 31. Can the mouse and keyboard be connected and disconnected when using the 7475T-6? Yes. The mouse and keyboard can be connected and disconnected while the 7475T-6 is running. 32. Can I use ActiveSync with the PanelMate epro ES like I do with other Windows CE devices (i.e. PDAs)? No. ActiveSync is not supported by the PanelMate epro ES. File transfers are done by using a CompactFlash reader or over Ethernet by using the epro Canvas Send to File feature. 33. Why don t I see my PanelMate epro ES unit when I browse the network computers? The Windows CE.net Operating System does not allow other computers to locate the PanelMate epro ES when browsing the network. On the other hand, when browsing from Windows Explorer on the PanelMate epro ES other computers can be seen. This is a current limitation of CE.net. 34. Why is there an access plate on the back of my PanelMate epro ES 7475T-6 unit? There is no need for you to remove the access plate on the back of the PanelMate 7475T-6 unit. This feature is for the use of authorized technicians only. Page 4 of 5 OI Business PanelMate epro ES FAQs PA E

5 35. How do I turn my PanelMate epro ES 7475T-6 unit on and off? There is an ON/OFF switch on the back of the unit that should be used when powering the unit on and off. The power switch should be in the OFF position before disconnecting/connecting power. You do not need to run a Shut Down program before turning the unit off. 36. What should I do if my PanelMate epro ES unit needs to be repaired? If your PanelMate epro ES unit needs to be repaired you should follow the same procedures you have used in the past for other Cutler-Hammer Operator Interface products. Contact your local Eaton Electrical Distributor for details. "Eaton" the EATON LOGO MARK and/or other Eaton names or products referenced herein are trade names, trademarks and/or service marks of Eaton Corporation, or its subsidiaries and affiliates. Other product or company names mentioned herein may be the trade name, trademark, or service mark of their respective owners. Page 5 of 5 OI Business PanelMate epro ES FAQs PA E

PanelMate. Operator Interface. Product Focus

PanelMate. Operator Interface. Product Focus PanelMate Operator Interface Product Focus For Sales and Support, Contact Walker EMD Toll-free: (800) 876-4444 Tel: (203) 426-7700 Fax: (203) 426-7800 www.walkeremd.com PanelMate Operator Interface For