光通維持 - 壽命試驗機 Lumen Maintenance Life Tester

Size: px

Start display at page:

Download "光通維持 - 壽命試驗機 Lumen Maintenance Life Tester"

Vincent Todd
6 years ago
Views:

1 巨孚儀器工業股份有限公司 LM-80 光通維持 - 壽命試驗機 Lumen Maintenance Life Tester April 2012, edition 1

2 Lumen Maintenance LED Light Source Life Tester ( 一 )Programmable LED High Power Tester ( 二 )Triple Type LED Light Source Test Chamber Feature: Low temp to 25, High temp up to 120 ( 二 ) ( 一 )

3 Tester ( 一 ) External Dim. Power Module Programmable Control System Module voltage range Module current range Module output power Output accuracy Programmable LED High Power Tester 600 * 1650 * 600 cm (W*H*D) (includes protruded things) 15 module/set, Each module is independent control, CC output,10 channel/module, Share the anodal design,150channel/ 台 color touch screen,rs232 interface 2. Total 15 independent output port, setting output port 10 channel as an unit 3. Can be set as power module model number 4. Can be set as power module name 5. Can be set at constant current output 6. Can be set the running time 0~9999.9hr (continuous output) 7. Micro SD card record device can record Vf If power T case temp and temp of chamber of each LED. 8. Can choose single channel to display the voltage current power T case temp. 9. Clock display. 10. Add value timer display 11. Auto reset upon power failure 12. Screen sleep function 13.Has auto compensation program for lie loss/voltage drop, software calibration function. DC0~6.0V DC0~1000mA Constant Current ±(1%+-2mA), subject to output terminal

4 Safety Device Data measuring device Standard Interface Micro SD 卡容量 Power Source a.over current protection b.led short circuit protection c.voltage upper limit protection d.current upper limit protection e.over heat in chamber protection Voltage (150points) current (150points) temperature (T case 15points) power (150 points) RS232 2G MB AC 220V, 50/60Hz, Max 15A

5 Chamber ( 二 ) Test Application Temp range Temperature Constancy Humidity Control system Water cooling Oil cooling Chamber Distribution inaccuracy T case Triple Type LED Light Source Test Chamber LM80 test +25 ~ 90 (2 room) +85 ~ 120 (1 room) The inaccuracy between controller set value and display is ±0.3 Set value within 5 in LED area of air Control and uniformity are less than ± 2 No control, but it have to keep under 65% relative humidity a. Adopt 3.1 LCD-9531 programmable controller, conversation mode by English-words. b. It could sign in 10 patterns x 100 steps. Each pattern can be executed up to 999 times; the maximum execution time of each step can reach 99 hours and 59 minutes. c. PID + S.S.R full-automation microcomputer control, easy and steady operation. d. The temperature can be controlled by slope, each program can be linked to each other and executed. e. Intelligent microcomputer controller, full automatic output function on individual refrigerant compressor, magnetic valve,heater etc f. Equipped with safety testing device to monitor main parts of each system. g. When trouble occurs, such as overheating, water lacking etc The related information would be displayed on the controller and power would be cut off. I. Chamber can be started on preset time. Set the start time Year /Month /Date /Hour / Minute. j. Convenient operation on shifting between fixes and program control. The maximum time of fix operation can up to 9999 hours and 59 minutes. k. Equipped with 10 years memory device in case of power failure. There are 3 options hot, cold and stop modes for restarting the machine. l. Hold, advance or other settings can be used when the program is being executed. m. Can display temperature, current running program and transferred into curves immediately.

6 Internal dimension External dimension Insulation material Water type fixture Temp set W50 x H45 x D50cm, total 3 room W116 x H198 x D116cm (not includes protruded things) Internal SUS#304, External SUS#430 + powder coated Temp range 25 ~ channel x 1 set at 55 ;50 channel x 1 set at 85 Oil type fixture Heading load Temp range Temp set Max. 250W (LED) 85 ~ channel x 1 set at 105 Heading load Safety device LED quantity Test duration Aluminum plate Accessories Max. 250W (LED) a. Over temp protection b. Compressor overload protection c. Fixture heating/cooling low water level protection d. Short circuit overload protection e. Water pump overload protection One room has 50 LED, total 3 rooms, 150LED (Max high power 5W/LED) Continuous 6000hours It should provide by buyer, buyer should send the sample of their aluminum plate w/led layout to us in advance. 10 LED converter x 15pcs; output flat cable x 15pcs ; 2G Micro SD card with software

7 LED SPEC LED application Suitable for under 5W/1000mA, 3W/750mA, 1W/, 50LED/room Current output T case temp LED quantity COB, 100W (Option) Constant Current Temp control Room (1) T case is needed to control within 55 ±2 Room (2) T case is needed to control within 85 ±2 Room (3) T case is needed to control within 105 ±2 50LED under 1W, total 150 LED 5 LED/room, total 15 LED (power supply for COB is an option)

11 Effective temperature control area

12 GCT-LM80 has refrigerating system Water cooling tank

13 Controller (SD card)

14 GCT-LM80-50-SD

15 Controller of Power Supply

16 Starting Condition Set Pattern Set

17 PV Display SUB Set

18 SD Record Set

19 Back side of Power Supply

20 LM80 Testing Report(1) LED test quantity LED model & spec Test equipment duration ambient Case temp LED drive current LED Initial flux lm CIE x,y (lm) 1000h CIE x,y (lm) 2000h 0 White light 1W LM-80 lumen tester 1000H 85 / 60RH% White light 1W LM-80 lumen tester 1000H 85 / 60RH% White light 1W LM-80 lumen tester 1000H 85 / 60RH% White light 1W LM-80 lumen tester 1000H 85 / 60RH% White light 1W LM-80 lumen tester 1000H 85 / 60RH% White light 1W LM-80 lumen tester 1000H 85 / 60RH% White light 1W LM-80 lumen tester 1000H 85 / 60RH% White light 1W LM-80 lumen tester 1000H 85 / 60RH% White light 1W LM-80 lumen tester 1000H 85 / 60RH% (lm) median (lm) standard deviation (lm) Min (lm) Max L% lumen depreciation L70% (hours) L50 % (hours)

21 LM80 Testing Report(2) CIE x,y (lm) CIE x,y (lm) 3000h 4000h CIE x,y (lm) 5000h CIE x,y (lm) 6000h CIE x,y LED failure no LED failure condition LED failure time LED monitoring interval Non determinacy 1H 1H 1H 1H 1H Parts6 No conduct 2010/12/2 9,15/02/05 1H 1H 1H

22 CUSTOMER LIST Lumen Maintenance Light Tester Customer name in Chinese 工業技術研究院 - 光電所光寶科技股份有限公司華興電子工業股份有限公司台灣表面黏著科技 ( 股 ) 公司台灣大電力研究試驗中心深圳市天電光電科技有限公司 ITRI - Electronics & Optoelectronics Research Laboratories LiteOn Technology Corp. Customer name in English Ledtech Electronics Co., Ltd. Taiwan Surface Mounting Technology Corp. Taiwan Electric Research & Testing Center Lightining Optoelectronic Technology (SZ) Co., Ltd..... Etc

23 Style of Alum. plate

TMJ-9712 Programmable Temperature & Humidity Chamber

TMJ-9712 Programmable Temperature & Humidity Chamber The TMJ-9712 Programmable Temperature & Humidity chamber is designed to test a wide range of materials including: Plastic, Rubber, Films, Packaging