Small Signal Zener Diodes
|
|
- Estella Curtis
- 6 years ago
- Views:
Transcription
1 BZX8-G-Series Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT range nom.. to V Test current T ; specification Pulse current Int. construction Single FEATURES Silicon planar Zener diodes The Zener voltages are graded according to the international E standard. Standard Zener voltage tolerance is ± %, indicated by the C in the ordering code. Replace C with B for ± % tolerance. AEC-Q qualified ESD capability acc. to AEC-Q: human body model: > 8 kv, machine model: > 8 V Base P/N-G - green, commercial grade Material categorization: For definitions of compliance please see ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY BZX8-G-series BZX8CV-G-8 to BZX8C-G-8 BZX8BV-G-8 to BZX8B-G-8 (8 mm tape on " reel) BZX8CV-G-8 to BZX8C-G-8 BZX8BV-G-8 to BZX8B-G-8 (8 mm tape on " reel) PACKAGE PACKAGE NAME WEIGHT MOLDING COMPOUND FLAMMABILITY RATING SOT- 8. mg UL 9 V- MOISTURE SENSITIVITY LEVEL MSL level (according J-STD-) SOLDERING CONDITIONS 6 C/ s at terminals ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Power dissipation T amb = C, device on fiberglass substrate, acc. layout on page P tot mw Thermal resistance junction to ambient air T amb = C, device on fiberglass substrate, acc. layout on page R thja K/W Junction temperature C Storage temperature range T stg - 6 to + C Operating temperature range T op - to + C Rev.., 8-Feb- Document Number: 88 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
2 BZX8-G-Series ELECTRICAL CHARACTERISTICS (T amb = C, unless otherwise specified) PART NUMBER MARKING CODE ZENER VOLTAGE RANGE TEST CURRENT REVERSE LEAKAGE CURRENT DYNAMIC RESISTANCE TEMPERATURE COEFFICIENT Z at T T T I R at V R Z Z at K at ZT I VZ at T ZT V μa V - / C MIN. NOM. MAX. MAX. MAX. MIN. MAX. BZX8CV-G G BZX8CV-G G BZX8CV-G G BZX8CV-G G BZX8CV6-G G BZX8CV9-G G BZX8CV-G G BZX8CV-G G BZX8CV-G G BZX8CV6-G G BZX8C6V-G G BZX8C6V8-G G BZX8CV-G G BZX8C8V-G G BZX8C9V-G G BZX8C-G G BZX8C-G G BZX8C-G G BZX8C-G G BZX8C-G G BZX8C6-G G BZX8C8-G G BZX8C-G G BZX8C-G G BZX8C-G G BZX8C-G G BZX8C-G G BZX8C-G G BZX8C6-G G BZX8C9-G G BZX8C-G G BZX8C-G G8...9 BZX8C-G G BZX8C6-G G BZX8C6-G G BZX8C68-G G BZX8C-G G Rev.., 8-Feb- Document Number: 88 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
3 BZX8-G-Series ELECTRICAL CHARACTERISTICS (T amb = C, unless otherwise specified) PART NUMBER MARKING CODE ZENER VOLTAGE RANGE TEST CURRENT REVERSE LEAKAGE CURRENT DYNAMIC RESISTANCE TEMPERATURE COEFFICIENT Z at T T T I R at V R Z Z at K at ZT I VZ at T ZT V μa V - / C MIN. NOM. MAX. MAX. MAX. MIN. MAX. BZX8BV-G H BZX8BV-G H BZX8BV-G H BZX8BV-G H BZX8BV6-G H BZX8BV9-G H BZX8BV-G H BZX8BV-G H BZX8BV-G H BZX8BV6-G H BZX8B6V-G H BZX8B6V8-G H BZX8BV-G H BZX8B8V-G H BZX8B9V-G H BZX8B-G H BZX8B-G H BZX8B-G H BZX8B-G H BZX8B-G H BZX8B6-G H BZX8B8-G H BZX8B-G H BZX8B-G H BZX8B-G H BZX8B-G H BZX8B-G H BZX8B-G H BZX8B6-G H BZX8B9-G H BZX8B-G H BZX8B-G H BZX8B-G H BZX8B6-G H BZX8B6-G H BZX8B68-G H BZX8B-G H Rev.., 8-Feb- Document Number: 88 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
4 BZX8-G-Series TYPICAL CHARACTERISTICS (T amb = C, unless otherwise specified) I F T J = C T J = C V V F Fig. - Forward Characteristics r zj T J = C 6.8/ Fig. - Dynamic Resistance vs. Zener Current 8 mw = C P tot R zj C 8 T amb Fig. - Admissible Power Dissipation vs. Ambient Temperature. 8 Fig. - Dynamic Resistance vs. Zener Current r zj T J = C Fig. - Dynamic Resistance vs. Zener Current R zth R zth = R tha x x negative positive V 8 at = Fig. 6 - Thermal Differential Resistance vs. Zener Voltage Rev.., 8-Feb- Document Number: 88 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
5 BZX8-G-Series R zj 8 = C = V mv/ C 8 6 = 6 8 V 8 Fig. - Dynamic Resistance vs. Zener Voltage Fig. - Temperature Dependence of Zener Voltage vs. Zener Voltage mv/ C - 8 = V V = C 86 Fig. 8 - Temperature Dependence of Zener Voltage vs. Zener Voltage Fig. - Change of Zener Voltage vs. Junction Temperature V at = C V = R zth x V at = Fig. 9 - Change of Zener Voltage vs. Junction Temperature Fig. - Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener Voltage Rev.., 8-Feb- Document Number: 88 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
6 BZX8-G-Series V = R zth x = l Z 8 6 Test current 9 = C = 6 8 V 88 Fig. - Change of Zener Voltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener Voltage V Fig. 6 - Breakdown Characteristics l Z = C Test current V 8 Fig. - Breakdown Characteristics = C l Z 8 Test current 6 V 8 Fig. - Breakdown Characteristics Rev.., 8-Feb- 6 Document Number: 88 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
7 BZX8-G-Series LAYOUT FOR R thja TEST Thickness: fiberglass.9" (. mm) Copper leads." (. mm). (.) (.) (.) (.8) (.) (.8) (.) (.9).8 (.) (.). (.6). (.) PACKAGE DIMENSIONS in millimeters (inches): SOT-. (.).8 (.). (.) max.. ref. (. ref.). (.).98 (.). (.8). (.).9 (.). (.8). (.8). (.). (.) to 8. (.). (.).6 (.). (.9). (.8). (.). (.6). (.) Foot print recommendation:. (.8) (.9).9 (.) (.9).9 (.) (.9).9 (.) Document no.: Rev. 8 - Date:.Sept (.).9 (.) Rev.., 8-Feb- Document Number: 88 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
8 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-Feb- Document Number: 9
Small Signal Zener Diodes
MMSZ22 to MMSZ267 Small Signal Zener Diodes PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT V Z range nom. 3.3 to 7 V Test current I ZT 1.7 to 2 ma V Z specification Thermal equilibrium Int. construction
More informationLow Capacitance, Single-Line ESD Protection Diode
VBUS51BD-HD1 Low Capacitance, Single-Line ESD Protection Diode 1 MARKING (example only) 856 XY Bar = cathode marking Y = type code (see table below) X = date code 111 855 DESIGN SUPPORT TOOLS click logo
More information4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 5 4 6 2 3 2897 MARKING (example only) 2896 XY Dot = pin marking X = date code Y = type code (see table below) 2932 FEATURES Ultra compact LLP-6M package Low package height
More information4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 2397 6 5 4 1 2 3 MARKING (example only) Dot = pin 1 marking XX = date code YY = type code (see table below) 2453 1 XX YY DESIGN SUPPORT TOOLS click logo to get started Models
More informationBidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP1006-2M
Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP-M 1 119 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table below) DESIGN SUPPORT TOOLS Models
More informationESD Protection Diode in LLP1006-2L
VESD3A1C-HD1 ESD Protection Diode in LLP16-2L 2 1 2856 MARKING (example only) XY Bar = cathode marking X = date code Y = type code (see table below) DESIGN SUPPORT TOOLS Models Available 21121 click logo
More informationBidirectional Symmetrical (BiSy) Low Capacitance, Single-Line ESD Protection Diode in LLP1006-2M
VBUS5L1-DD1 Bidirectional Symmetrical (BiSy) Low Capacitance, Single-Line ESD Protection Diode in LLP16-2M 1 2 21129 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table
More informationBidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP1006-2L
VCUT7B1-HD1 Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP16-2L 1 2 21129 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table below) 21121 2855
More information5-Line ESD Protection Diode Array in LLP75-6L
-Line ESD Protection Diode Array in LLP7-6L 6 996 MARKING (example only) 997 XX YY Dot = pin marking XX = date code YY = type code (see table below) DESIGN SUPPORT TOOLS Models Available click logo to
More informationESD Protection Diode in LLP1006-2L
VESD5A1B-HD1 ESD Protection Diode in LLP16-2L 2855 MARKING (example only) XY Bar = cathode marking X = date code Y = type code (see table below) 2 1 21121 2856 DESIGN SUPPORT TOOLS click logo to get started
More information4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 2397 6 5 4 1 2 3 MARKING (example only) XX YY Dot = pin 1 marking XX = date code YY = type code (see table below) 2453 1 DESIGN SUPPORT TOOLS click logo to get started Models
More informationUSB-OTG BUS-Port ESD Protection for V BUS = 12 V
USB-OTG BUS-Port ESD Protection for V BUS = 12 V 6 5 4 1 2 3 MARKING (example only) 2517 Dot = pin 1 marking XX = date code YY = type code (see table below) 7 2112 XX YY DESIGN SUPPORT TOOLS click logo
More information2-Line BUS-Port ESD Protection - Flow Through Design FEATURES VBUS052CD-FAH VBUS052CD-FAH-GS MOLDING COMPOUND FLAMMABILITY RATING
VBUS52CD-FAH 2-Line BUS-Port ESD Protection - Flow Through Design 21325 NC NC 6 5 4 MARKING (example only) 21323 Dot = pin 1 marking Y = type code (see table below) XX = date code 1 2 3 YXX 219 DESIGN
More informationUltra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP1006-2M
Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP6-2M 1 2 21129 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table below)
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More information4-Line BUS-Port ESD Protection Array - Flow Through Design
-Line BUS-Port ESD Protection Array - Flow Through Design 22736 5 MARKING Pin 1 5F = type code = date code month YY = date code year DESIGN SUPPORT TOOLS click logo to get started Models Available 1 YY
More information2-Line BUS-Port ESD-Protection - Flow Through Design FEATURES VBUS052CD-FAH VBUS052CD-FAH-GS MOLDING COMPOUND FLAMMABILITY RATING
2-Line BUS-Port ESD-Protection - Flow Through Design 21325 NC NC 6 5 4 MARKING (example only) 21323 Dot = pin 1 marking Y = type code (see table below) XX = date code 1 2 3 YXX 219 FEATURES Compact LLP113-L
More informationBZW04-5V8 thru BZW TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors DO-41 (DO-204AL) FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 400 W peak pulse power capability with a 10/0 μs waveform,
More information4-Line BUS-Port ESD Protection - Flow Through Design FEATURES VBUS54GD-FBL VBUS54GD-FBL-G MOLDING COMPOUND FLAMMABILITY RATING
4Line BUSPort ESD Protection Flow Through Design nc. 1 nc. GND nc. nc. 9 8 7 6 D1+ D1 GND D2+ D2 22552 MARKING (example only) Dot = pin 1 marking YY = type code (see table below) XX = date code 22791 YYXX
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (uni-directional) 6.4 V to 49.1 V V BR (bi-directional) 6.4 V to 49.1 V V WM
More information4-Line BUS-Port ESD-Protection - Flow Through Design VBUS054CD-FHI VBUS054CD-FHI-GS
4-Line BUS-Port ESD-Protection - Flow Through Design Features Compact LLP2513-11L package Low package height
More informationMaximun Ratings and Electrical Characteristics at 25 C
SOD123W Voltage Power Dissipation 9.1 to 220 V 1 W FEATURE Low profile package Ideal for automated placement Low leakage current High surge current and zener capability Low differential resistance Low
More informationAluminum Capacitors Power Printed Wiring Style
Not Available for New Designs, Use 050 PED-PW www.vishay.com Aluminum Capacitors Power Printed Wiring Style FEATURES Very long useful life: 15 000 h at +85 C High ripple current capability High resistance
More informationAluminum Electrolytic Capacitors Radial Miniature, High Voltage
Aluminum Electrolytic Capacitors Radial Miniature, High Voltage low 148 RUS voltage Fig. 1 QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 10 x 12 to 18 x 35 Rated capacitance
More informationAluminum Capacitors Power Printed Wiring Style
Aluminum Capacitors Power Printed Wiring Style FEATURES Very long useful life: 12 000 h at +85 C High ripple current capability High resistance to shock and vibration Polarized aluminum electrolytic capacitors,
More information4-Line BUS-Port ESD Protection - Flow Through Design FEATURES VBUS54ED-FBL VBUS54ED-FBL-G MOLDING COMPOUND FLAMMABILITY RATING
4Line BUSPort ESD Protection Flow Through Design nc. nc. GND nc. nc. 9 8 7 6 D1+ D1 GND D2+ D2 22552 MARKING (example only) Dot = pin 1 marking YY = type code (see table below) XX = date code 22551 YYXX
More informationUltra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in Silicon Package
VBUS5B1-SD Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in Silicon Package FETURES Ultra compact CLP63 package 22543 22544 MRKING (example only) 1.3 XY 1 = year
More information2-Line Low Capacitance, Bidirectional and Symmetrical (BiSy) ESD Protection Diode - Flow Through Design
VBUS5M2-HT 2-Line Low Capacitance, Bidirectional and Symmetrical (BiSy) ESD Protection Diode - Flow Through Design 2284 3 MRKING (example only) Bar = cathode marking X = date code Y = type code (see table
More informationAluminum Electrolytic Capacitors SMD (Chip), High Temperature
Aluminum Electrolytic Capacitors SMD (Chip), High Temperature Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) 25 C VALUE 8 x 8 x 0 to 8 x 8 x 2 Rated capacitance range, C R 0
More informationAluminum Capacitors Radial Style 125 C
EKL Obsolete - Partly replaceable by 140 RTM (28322) FEATURES Polarized aluminum electrolytic capacitor Long lifetime High temperature range up to 125 C Low impedance High reliability APPLICATIONS Component
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 04520, DB 04555 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Geometry minimizes inductance Wide range of capacitance values High feed-through currents APPLICATIONS Filtering
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors AEC-Q200 qualified available with PPAP for size
More informationAluminum Electrolytic Capacitors Axial Standard Miniature
Aluminum Electrolytic Capacitors Axial Standard Miniature 041/043 ASH high voltage lower longer life 117 ASD CV-values 138 AML 105 C Fig. 1 QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø
More informationAluminum Electrolytic Capacitors Radial High Temperature Standard
Aluminum Electrolytic Capacitors Radial High Temperature Standard Longer life Higher temperature 038 RSU 105 C 125 C 140 RTM Lower Z Lower Z 150 RMI 146 RTI Fig. 1 QUICK REFERENCE DATA DESCRIPTION VALUE
More informationAluminum Electrolytic Capacitors Power Long Life 4-Terminal Snap-In
Aluminum Electrolytic Capacitors Power Long Life 4Terminal SnapIn FEATURES Very long useful life: 10 000 h at 85 C Polarized aluminum electrolytic capacitors, nonsolid electrolyte Large types, minimized
More informationSurge Suppressor Capacitors, Single Phase Units, All-Film Technology up to 36 kv
Surge Suppressor Capacitors, Single Phase Units, All-Film Technology up to 36 kv FEATURES Latest technology Dielectric liquid biodegradable High quality materials Damping resistor from 10 to 50 APPLICATIONS
More informationSurface Mount Zener Diode
Surface Mount Zener Diode FEATURES - Zener voltages from : 2.4V - 39V - Planar die construction - Ideally suited for automated assembly processes - Moisture sensitivity : Level 1 per J-STD-2 MECHANICAL
More information25 mil Pitch, IEEE 1284 Termination Thin Film Surface Mount Resistor, Capacitor, Diode
End of Life Dec-2017 VSSX1284 25 mil Pitch, IEEE 1284 Termination Thin Film Surface Mount Resistor, Capacitor, Diode Product is pictured larger than actual size to show detail Vishay has upgraded the standard
More informationPreamplifier Circuit for IR Remote Control
Preamplifier Circuit for IR Remote Control FEATURES Carrier-out-function: carrier frequency and burst length accurately correspond to the input signal AC coupled response from 20 khz to 60 khz; all data
More informationHigh Voltage AC Power Capacitors 1-Phase Units
High Voltage AC Power Capacitors 1-Phase Units FEATURES Latest technology High quality materials Low losses design Dielectric liquid biodegradable APPLICATIONS Power factor correction Harmonic filtering
More informationWirewound Resistor, Industrial Power, Vitreous Coated, Fixed Tubular
Wirewound Resistor, Industrial Power, Vitreous Coated, Fixed Tubular FEATURES High temperature vitreous coating Complete welded construction Available in non-inductive style (special NI ) with Ayrton-Perry
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V V Z tolerance selection of ± 5% Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
More informationAluminum Electrolytic Capacitors Radial Low Profile, 7 mm
Aluminum Electrolytic Capacitors Radial Low Profile, 7 mm ig.0 Component outlines. 038 RSU higher lower height 7 mm CV-values 5 mm ig. 1 134 RLP 5 QUICK REERENCE DATA DESCRIPTION VALUE Nominal case sizes
More informationAluminum Capacitors Radial Low Profile, 7 mm
Aluminum Capacitors Radial Low Profile, 7 mm ig.0 Component outlines. 038 RSU higher lower height 7 mm CV-values 5 mm ig. 1 134 RLP 5 QUICK REERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in
More informationIHLP-8787MZ-5A 100 μh ± 20 % ER e3 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD
IHP-77MZ-5A IHP Automotive Inductors, High Temperature (155 C) Series DESIGN SUPPORT TOOS click logo to get started Models Available STANDARD EECTRICA SPECIFICATIONS INDUCTANCE ± % AT 1 khz,.5 V, A (μh)
More informationHigh Voltage AC Power Capacitors 3-Phase Capacitor Banks
High Voltage AC Power Capacitors 3-Phase Capacitor Banks FEATURES Latest technology High quality materials Low losses design Dielectric liquid biodegradable APPLICATIONS Power factor correction Harmonic
More information500mW 5% Zener Diodes
MMSZ522B - MMSZ5262B 500mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 20/65/EU and in
More information0.508 [12.9] Max [6.4] Max.
IHP-55FD-1 IHP Commercial Inductors, High Saturation Series DESIGN SUPPORT TOOS click logo to get started Models Available Design Tools Available STANDARD EECTRICA SPECIFICATIONS INDUCTANCE ± % AT 1 khz,.5
More informationFEATURES APPLICATIONS [12.9] Max [5.0] Max.
IHP-55EZ-1 IHP Commercial Inductors, High Saturation Series DESIGN SUPPORT TOOS click logo to get started Models Design Tools STANDARD EECTRICA SPECIFICATIONS INDUCTANCE ± 2 % AT 1 khz,.25 V, A (μh) DCR
More informationAPPLICATIONS. SRF TYP. (MHz) ± [3.0 ± 0.2] [2.0] Max. IHLP-1212BZ μh ± 20 % ER e3
IHP-1212BZ-11 IHP Commercial Inductors, ow DCR Series DESIGN SUPPORT TOOS click logo to get started Design Tools Available STANDARD EECTRICA SPECIFICATIONS 0 INDUCTANCE ± % AT khz, 0.25 V, 0 A (μh) DCR
More information0.508 [12.9] Max [5.0] Max.
IHP-55EZ-A1 IHP Automotive Inductors, High Saturation Series DESIGN SUPPORT TOOS click logo to get started Models Available Design Tools Available STANDARD EECTRICA SPECIFICATIONS INDUCTANCE DCR ± 2 %
More informationFEATURES APPLICATIONS ± [6.47 ± 0.254]
IHP-CZ- IHP Commercial Inductors, High Saturation Series DESIGN SUPPORT TOOS click logo to get started Models Available STANDARD EECTRICA SPECIFICATIONS INDUCTANCE ± % AT khz,. V, A (μh) Design Tools Available
More informationEdgewound Power Resistor
Edgewound Power Resistor FETURES Resistance-alloy ribbon wire is coiled on edge and supported on specially designed porcelain insulators Open coil construction allows efficient heat dissipation and easily
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Surface mounting device (SMD) type Moisture sensitivity level: level, per J-STD-020
More informationMetallized Polyester Film Capacitors MKT Radial Type
MKT8 Metallized Polyester Film Capacitors MKT Radial Type FEATURES.0 mm to. mm lead pitch Self-healing properties Flame retardant case Material categorization: For definitions of compliance please see
More informationAC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
Not Recommended for New Designs, Use MMKP8 MKP84 AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES. mm to. mm lead pitch Material categorization: for definitions
More informationLower Voltage Ceramic Singlelayer DC Disc Capacitors 2 kv DC to 7.5 kv DC
Lower Voltage eramic Singlelayer D Disc apacitors 2 kv D to 7.5 kv D FEATURES Low losses High capacitance in small sizes High stability Radial leads Material categorization: for definitions of compliance
More informationFEATURES APPLICATIONS. IHLP-3232CZ-1L 4.7 μh ± 20 % RZ MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE
IHP Tin/ead Inductors, ow DCR Series IHP-3232CZ-1 DESIGN SUPPORT TOOS click logo to get started Design Tools Available STANDARD EECTRICA SPECIFICATIONS INDUCTANCE ± % AT khz,.25 V, A (μh) DCR TYP. 25 C
More informationSolid-Electrolyte TANTALEX Capacitors, Military MIL-PRF-39003/03 Qualified, Style CSR23
Solid-Electrolyte TANTALEX Capacitors, ilitary IL-PRF-39003/03 Qualified, Style CSR23 FEATURES Hermetically sealed etal cased Axial lead Weibull failure rates B, C, Exponential failure rates, P, R, S Tape
More informationDisplacement Sensor, Ultraflat Industrial Potentiometer Membrane
Displacement Sensor, Ultraflat Industrial Potentiometer Membrane DESIGN SUPPORT TOOLS click logo to get started FEATURES Sealed Infinite resolution High integration capacity Durability Rectilinear: type
More informationCeramic Singlelayer DC Disc Capacitors for General Purpose Class 1, Class 2 and Class 3, 50 V DC, 100 V DC, 500 V DC
Ceramic Singlelayer DC Disc Capacitors for General Purpose Class 1, Class 2 and Class 3, 50 V DC, 100 V DC, 500 V DC FEATURES High capacitance with small size High reliability Crimp and straight lead styles
More information200mW, 2% Tolerance Zener Diodes
200mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 3.6V to 36V V Z tolerance selection of ± 2% Moisture sensitivity level: level 1, per J-STD-020 Compliant to RoHS directive
More informationBZD17C SERIES Taiwan Semiconductor
0.8W, 11V - 220V Voltage Regulator Diodes FEATURES - Silicon zener diodes - Low profile surface-mount package - Zener and surge current specification - Low leakage current - Excellent stability - Compliant
More informationNTC Thermistors, Micro Chip Sensor Insulated Leads
NTCLE305E4 SB NTC Thermistors, Micro Chip QUICK REFERENCE DATA PARAMETER VALUE UNIT value at 25 C Accuracy of temperature measurement 2060 to 10 000 Ω ± 0.5 between 25 and 85 ± 1.0 between - 40 and + 125
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide Zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC
More information500mW 5% Zener Diodes
5mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 36V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 211/65/EU and in accordance to WEEE 22/96/EC
More informationLower Voltage Ceramic Singlelayer DC Disc Capacitors 2 kv DC to 7.5 kv DC
Vishay era-mite Lower Voltage eramic Singlelayer D Disc apacitors 2 kv D to 7.5 kv D FEATURES Low losses High capacitance in small sizes High stability Radial leads Material categorization: for definitions
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications FEATURES Available from 0402 to 1210 body sizes Ultra stable C0G (NP0) dielectric High capacitance in X5R, X7R, Y5V For high
More informationAluminum Capacitors Radial Style
Obsolete - Partly replaceable by 134 RLP5 (28307) EKF Component outlines FEATURES Polarized aluminum electrolytic capacitor High CU product with miniature dimensions Temperature range 85 C APPLICATIONS
More informationMaximun Ratings and Electrical Characteristics at 25 C
, FB25, FB35,, Power - Power L Voltage Current 50 to 1000 V 15-25-35-40-50 A FEATURES High case dielectric strength High forward surge current capability UL recognition file number E320541, Vol. 2. Universal
More informationLow Profile, High Current IHLP Inductors
ow Profile, High Current IHP Inductors IHP-CZ-11 Manufactured under one or more of the following: US Patents; 6,198,37/6,,7/6,9,89/6,,. Several foreign patents, and other patents pending. STANDARD EECTRICA
More information500mW, 2% Tolerance SMD Zener Diode
500mW, 2% Tolerance SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 75V - Surface mount device type - Moisture sensitivity level - Pb free and RoHS compliant - V Z Tolerance Selection
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications FEATUES Available from 0402 to 1210 body sizes Ultra stable C0G (NP0) dielectric High capacitance in X5, X7, Y5V For high frequency
More information500mW, 2% Tolerance Zener Diodes
500mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 2% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-free
More informationEdgeboard Connectors, 200 C Burn-In Connectors, Dual Readout
Edgeboard s, 200 C Burn-In s, Dual Readout FEATURES EB4, 0.100" (2.54 mm) C-C; EB6, " (3.17 mm) C-C; EB7 and EB8, 0.156" (3.96 mm) C-C Right angle styles included for all models High temperature, glass
More informationLow Profile, High Current IHLP Inductors
ow Profile, High Current IHP IHP-55CE-A1 Vishay Dale Manufactured under one or more of the following: US Patents; 6,198,375/6,24,744/6,449,829/6,46,244. Several foreign patents, and other patents pending.
More informationAluminum Capacitors +85 C, Miniature, Radial Lead
Aluminum Capacitors +85 C, Miniature, Radial Lead FEATURES High CV per case size Low cost Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA
More informationLow Profile, High Current IHLP Inductors
ow Profile, High Current IHP Inductors IHP-6767GZ-11 Manufactured under one or more of the following: US Patents; 6,198,37/6,,7/6,9,89/6,6,. Several foreign patents, and other patents pending. STANDARD
More informationP1SMA5914-AU ~ 1SMA5945-AU Series
SILICON ZENER DIODE oltage 3.6~68 Power 1.5 W Features Silicon planar Zener diode Low profile surface-mount package Low leakage current Excellent stability High temperature soldering: 260 o C/ seconds
More informationSMBJ5.0A thru SMBJ188A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V P PPM 600 W I FSM (uni-directional only) A T J max. 150 C DEVICES FOR BI-DIRECTION
More informationCeramic Pulse Disc Capacitors, Class 2
...,..., HK...,... eramic Pulse Disc apacitors, lass 2 Vishay Draloric D max. 3 max. s max. FEATURES ompliant to RoHS directive 22/95/E DESIGN Disc capacitor with epoxy coating F ± 1 L = 3-3 V ±.5 RATED
More informationSurface Mount Silicon Zener Diodes
FEATURES CREAT BY ART - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Low inductance - Typical IR less than 0.5μA above 11V - ESD Rating of
More informationAluminum Capacitors Axial Standard Miniature
021 ASM Fig.1 Component outlines 041/043 ASH high voltage lower longer life 117 ASD CV-values 021 ASM 138 AML 105 C QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 4.5 x 10 to
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR uni-directional 6.40 V to 231 V V BR bi-directional 6.40 V to 231 V V WM 5.0 V to 188 V P PPM 1500 W P D 6.5 W I FSM (uni-directional
More information2M6.8Z - 2M200Z Taiwan Semiconductor
2W, 6.8V - 200V Glass Passivated Junction Silicon Zener Diodes FEATURES - Glass passivated chip junction - Typical I R less than μa - Compliant to RoHS Directive 20/65/EU and in accordance to WEEE 2002/96/EC
More informationBi-directional ESD Protection Diode
Bi-directional ESD Protection Diode FEATURES Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) Meet IEC61-4-4 (EFT) rating. 4A (5/5ns) Protects one Bi-directional I/O line Moisture sensitivity level: level
More informationMM3ZxxxT1G Series, SZMM3ZxxxT1G Series. Zener Voltage Regulators. 300 mw SOD 323 Surface Mount
MM3ZxxxT1G Series, SZMM3ZxxxT1G Series Zener Voltage Regulators 3 mw Surface Mount This series of Zener diodes is packaged in a surface mount package that has a power dissipation of 3 mw. They are designed
More informationSMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 600 W I FSM (uni-directional
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications FEATUES Available from 0402 to 1210 body sizes Ultra stable C0G (NP0) dielectric High capacitance in X5, X7, Y5V For high frequency
More informationLow forward voltage Ultra small SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior
Rev. 02 15 January 2010 Product data sheet 1. Product profile 1.1 General description Planar Schottky barrier triple diode with an integrated guard ring for stress protection. Three electrically isolated
More informationAluminum Capacitors Radial Long-Life, High Voltage 152 RMH
151 RLH BCcomponents Aluminum Capacitors 044 RSH 85 C 148 RUS miniaturized Fig.1 Component outline 151 RLH 105 C low voltage 048 RML QUICK REFERENCE DATA miniaturized 152 RMH DESCRIPTION VALUE Nominal
More informationAluminum Capacitors Radial Standard Ultra Miniature
038 RSU Aluminum Capacitors EATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Radial leads, cylindrical aluminum case, insulated with a blue vinyl sleeve RoHS COMPLIANT Pressure
More informationVoltage Regulator Example Ying Sun
Voltage Regulator Example Ying Sun Voltage Regulator Circuit Vin is 9V. We want to regulate Vout at 5V. We use a zener diode of 3.3 V as shown in the attached data sheet. 1) Determine R1. R1 provides the
More informationCeramic Disc Capacitors Class 1 and 2, 50 V DC, General Purpose
D Series eramic Disc apacitors D D FEATURES Low losses High stability High capacitance in small size Tangent line SH Tangent line DR Kinked (preferred) or straight leads ompliant to RoHS directive 2002/95/E
More informationSOD123F (Type B) Top View. Part Number Compliance Case Packaging (Type Number)-7* AEC-Q101 SOD123F (Type B) 3,000/Tape & Reel
SURFACE MOUNT ZENER DIODE Features Flat Lead Package Design for Low Profile and High Power Dissipation Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR uni-directional 6.40 V to 231 V V BR bi-directional 6.40 V to 231 V V WM 5.0 V to 188 V P PPM 1500 W P D 6.5 W I FSM (uni-directional
More informationPace-Pak GBPC KBPC KAB KBB KBP.
VISHAY INTERTECHNOLOGY, INC. high-power products Bridge Modules Selector Guide MTK MTP Pace-Pak MT MB GBPC KBPC KAB KBB KBP Bridge Modules Versatile and high-efficiency bridge modules from feature industry-standard
More informationDual back-to-back Zener diode
Rev. 01 28 January 2008 Product data sheet 1. Product profile 1.1 General description in a SOD323 (SC-76) very small Surface-Mounted Device (SMD) plastic package. 1.2 Features Non-repetitive peak reverse
More informationGeneral-purpose Zener diodes in a SOD323F (SC-90) very small and flat lead Surface-Mounted Device (SMD) plastic package.
Rev. 2 29 July 2011 Product data sheet 1. Product profile 1.1 General description General-purpose Zener diodes in a SOD323F (SC-90) very small and flat lead Surface-Mounted Device (SMD) plastic package.
More informationM3Z2V4~M3Z75V ZENER DIODES 200mW ZENER VOLTAGE REGULATORS
DESCRIPTION This series of Zener Diodes is packaged in a SOD-323 surface mount package that has a power dissipation of 200mW. They are designed to provide voltage regulation protection and are especially
More information