Amphenol High Density HDB 3 /HSB 3 Connectors
|
|
- Alicia Nichols
- 6 years ago
- Views:
Transcription
1 Amphenol HDB 3 /HSB 3 Connectors TABLE OF CONTENTS Amphenol HDB 3 and HSB Connectors 3 Table of Contents Introduction - Features, Options, Performance , 47 HDB 3 HDB3 Mother Board Connector HDB3 Daughter Board Connector HDB3 I/O Connector HDB3 Stacker Connector HSB 3 HSB3 Mother Board Connector HSB3 Daughter Board Connector HSB3 Arrangements Recommended Board Layout - HSB 3 Daughter Board Recommended Layout - HSB 3 Mother Board Hardware for both HDB3 and HSB Connectors HDB LRM 3 Typical and HSB Markets: 3 Typical Markets: UAVs C4ISR Naval Space High Radar De!nition Cameras Military Transportation & Commercial Aviation Military Medical Vehicles Equipment Missiles/Ordnance Military & Commercial Avionics C4ISR Contact Amphenol for more information at
2 46 Contact Staggered/ GEN-X Fiber Optics/ /RF/Power Options/Access./ VME/VITA(VIPER) HSB3 HDB3 Amphenol s HDB 3 Series with Tighter (.070 inch X.060 inch) Staggered Grid Spacing This new connector series of brush connectors incorporates a higher density contact pattern and lower mated height than Amphenol s standard low mating force rectangular connectors. HDB 3 connectors utilize the same durable and reliable B 3 brush contact in a tighter.070 X.060 staggered grid pattern. HDB 3 Advantages over Competitive Connectors: Higher density contact pattern Uses less board space Allows for shorter mated height New/Featured Product Provides the durability and performance of the contact Low cost AMPHENOL HDB 3 COMPARED TO COMPETITION Connector Features Amphenol Hypertronics HDB3 HPH HDB 3 Daughter Board/Mother Board HDB 3 Daughter Board Connector HDB 3 Stacker HDB 3 Mother Board Connector Amphenol HDB 3 and HSB 3 Connectors INTRODUCTION: FEATURES & OPTIONS HDB 3 Stacker for Applications that Need or Demand Parallel Boards HDB 3 Mother Board Connector Airborn RM4 Contact System Hyperoloid Pin & Socket Durability, Mating Cycles 100,0000, Contact Mating Forces (ounces) Mother Board.070 X X X.070 Daughter Board.070 X X X.100 Connector Width Mated Height, MB to 4th row of DB HIGH DENSITY STYLES AMPHENOL S BRUSH CONTACT - THE SUPERIOR CHOICE FOR BOARD LEVEL INTERCONNECTS BRUSH CONTACT Multiple strands of high tensile strength wire bundled together to form brush-like contacts. See Contact Technology section of this catalog for further description. CONVENTIONAL PIN AND SOCKET CRIMP CONTACT HDB 3 I/O Connector HSB 3 High Speed HSB 3 High Speed Connectors are Capable of 3.15 Gbps Contact Amphenol for more information at HDB 3 I/O Connector HDB 3 Mother Board Connector
3 Amphenol HDB 3 and HSB 3 Connectors INTRODUCTION: FEATURES & PERFORMANCE Contact HBD 3 10 pin Mother Board and Daughter Board HDB 3 & HSB 3 HIGH DENSITY CONNECTOR PERFORMANCE: Durability 100,000 mating cycles Insertion/Extraction Force: 1.5 ounce typical per contact Operating Temperature: -65 to 15 C Current Rating: amperes Hot swap 1 ampere maximum (load dependent) Insulation Resistance: 5 gigaohms minimum Dielectric Withstanding Voltage: 750 volts, 60 hertz, Sea Level, 50 volts, 60 hertz, 70,000 feet elevation Solderability: MIL-STD-0, Method 08 Salt Fog: 48 Hours IAW MIL-STD-1344, method 1001, test condition B Humidity: IAW MIL-STD-1344, method 100, type II Vibration: 4 hours in each of 3 mutually perpendicular axes IAW MIL STD-1344, method 005, test condition V, letter H Shock: 1 shock along each of three mutually perpendicular axes IAW MIL-STD-1344, method 004,test condition G Data Rate (HSB 3 ): Amphenol for arrangement) CUSTOM DESIGN AVAILABILITY: Capable of 3.15 Gbps (consult HSB 3 Hybrid Connector with Metal Shell and RF Contacts supplied by SV Microwave* * See more information on SMPM RF contacts in Section, page 14. SMPM RF contacts can be supplied by Amphenol SV Microwave. Phone: Website: HDB 3 Mother Board and Daughter Board Mated HDB 3 & HSB 3 HIGH DENSITY CONNECTOR FEATURES: Polarization: D shaped design Keying: Optional keys offer 36 unique keying combinations Guide Pins Optional guide pins provide additional alignment Radial Misalignment: Capable of correcting up to a 00 initial radial misalignment Angular Misalignment: Capable of mating with up to a initial angular misalignment MATERIALS: Insulator: Liquid crystal polymer, 30% glass!lled Contact: Wire: Beryllium copper per ASTM B197;!nish is gold per ASTM B488 over nickel per AMS-QQ-N-90 Holder: Brass similar to UNS C33500; available!nishes include gold per MIL-G-4504, tin-lead per MIL-P or tin per MIL-T-1077 (RoHS Compliant) Sleeve: Stainless steel per AMS-5514, passivated IAW QQ-P-35 (Daughterboard, I/O and Stacker connector) Contact Amphenol for more information at Staggered/ Fiber Optics/ Options/Access./ GEN-X HiSpeed/RF/Power VME/VITA(VIPER) HDB3 HSB3 47
4 Contact Staggered/ GEN-X Fiber Optics/ /RF/Power Options/Access./ VME/VITA(VIPER) HSB3 HDB3 HDB 3 MOTHER BOARD - HOW TO ORDER Mates with: I/O Daughter Board Stacker 1. Connector Type HDB-M4 Designates HDB 3 Mother Board. Number of Contacts Number of Dimension Dimension Contacts A C Wire Plating M C Au Min. thick over Nickel Au Min. thick over Nickel 4. Termination Type Stickout (Dim. E) PCB, Straight,.016 Dia PCB, Straight,.016 Dia PCB, Straight,.016 Dia PCB, Straight,.016 Dia PCB, Straight,.016 Dia Contact Termination Finish 5 6 Gold plated in accordance with MIL-G-4504, Type II, Min. thick Gold over Min. thick Nickel Tin plated in accordance with ASTM B545, Min. thick Matte Tin over Min. thick Nickel Tin-Lead plated in accordance with SAE-AMS-P-8178, Min. Tin-Lead over Min. thick Copper Mother Board Layout Amphenol HDB 3 Mother Board Connector DIMENSIONAL DRAWING & HOW TO ORDER Number of Contacts Wire Plating Termination Contact Termination Finish Less Hardware (Purchased separately see pg XX for hardware options) HDB-M4-040 M 4 X 6. Hardware X Less Hardware Hardware is purchased separately (see page 57 for hardware options). Mother Board Daughter Board 48 Contact Amphenol for more information at
5 Amphenol HDB 3 Daughter Board Connector DIMENSIONAL DRAWING & HOW TO ORDER HDB 3 DAUGHTER BOARD - HOW TO ORDER Mates with: Mother Board 1. Connector Type HDB-D4 Designates HDB 3 Daughter Board. Number of Contacts Number of Dimension A C Dimension Contacts Wire Plating M Au Min. thick over Nickel C Au Min. thick over Nickel 4. Termination Type Stickout (Dim. E) 01 PCB, Right Angle,.016 Dia PCB, Right Angle,.016 Dia PCB, Right Angle,.016 Dia PCB, Right Angle,.016 Dia PCB, Right Angle,.016 Dia Contact Termination Finish 5 6 Gold plated in accordance with MIL-G-4504, Type II, Min. thick Gold over Min. thick Nickel Tin plated in accordance with ASTM B545, Min. thick Matte Tin over Min. thick Nickel Tin-Lead plated in accordance with SAE-AMS-P-8178, Min. Tin-Lead over Min. thick Copper Daughter Board Layout Number of Contacts Wire Plating Termination Contact Termination Finish Less Hardware (Purchased separately see pg X for hardware options) HDB-D4 040 M 01 X 6. Hardware X Less Hardware Hardware is purchased separately (see page 57 for hardware options). Mated Height Dimensions Contact Staggered/ Fiber Optics/ Options/Access./ GEN-X HiSpeed/RF/Power VME/VITA(VIPER) HDB3 HSB3. Contact Amphenol for more information at
6 Amphenol HDB3 I/O Connector, Connector HDB3 I/O APPLICATIONS Cable to board applications Crimp termination Uses wire well size D HDB3 I/O - HOW TO ORDER Connector Type HDB-D4C Designates HDB3 I/O Connector 3LHFH &RQVWUXFWLRQ Mother Board Mates with: Mother Board HDB-D4C Number of Contacts Wire Plating Contact Termination Finish -10 C. Number of Contacts Number of Contacts Dimension A Dimension C ($' /&.,1* 6&5(: 6833/,(' 3, Wire Plating M C Au Min. thick over Nickel Au Min. thick over Nickel & $ 4. Contact Termination Finish Gold plated in accordance with MIL-G-4504, Type II, Min. thick Gold over Min. thick Nickel MATING MOTHER BOARD CONNECTOR ASSEMBLED INPUT/OUTPUT CONNECTOR 0$7,1* 685)$&( HDB3 HSB3 50 DIMENSIONAL DRAWING & HOW TO ORDER FRONT HALF INPUT/OUTPUT CONNECTOR REAR HALF INPUT/OUTPUT CONNECTOR Options/Access./ Fiber Optics/ Staggered/ VME/VITA(VIPER) /RF/Power GEN-X Contact $PSKHQRO EXPLODED ISOMETRIC VIEW THREADED BOSS ( REQUIRED FOR MOTHER BOARD CONNECTOR SEE HARDWARE ON PAGE 10) LOCKING SCREWS SUPPLIED REMOVABLE CRIMP CONTACTS FOR SIZE THRU 8 GAGE WIRE Contact Amphenol for more information at
7 Amphenol HDB 3 Stacker Connector DIMENSIONAL DRAWING & HOW TO ORDER HDB 3 STACKER APPLICATIONS For applications that need or demand parallel boards HDB 3 STACKER - HOW TO ORDER Mates with: Mother Board 1. Connector Type HDB-D4S Designates HDB 3 Stacker Connector. Number of Contacts Number Number of Dimension Dimension Diff Signals Contacts A C Wire Plating M Au Min. thick over Nickel C Au Min. thick over Nickel 4. Termination 5. Contact Termination Finish Type Gold plated in accordance with MIL-G-4504, Type II, Min. thick Gold over Min. thick Nickel Number of Contacts Wire Plating Termination Contact Termination Finish Less Hardware (Purchased separately see pg XX for hardware options) HDB-D4S 10 C X Stickout (Dim. E) PCB, Straight,.016 Dia PCB, Straight,.016 Dia PCB, Straight,.016 Dia PCB, Straight,.016 Dia Stacker Connector 6. Hardware X Less Hardware Hardware is purchased separately (see page 57 for hardware options). Mother Board Contact Staggered/ Fiber Optics/ Options/Access./ GEN-X HiSpeed/RF/Power VME/VITA(VIPER) HDB3 HSB3 EXPLODED ISOMETRIC VIEW STANDARD HDB3 MB CONNECTOR WITH OPTIONAL GUIDE PINS HDB3 STACKER CONNECTOR STANDARD HDB3 MB SHOWN WITH OPTIONAL LOCKING GUIDE PINS Contact Amphenol for more information at
8 5 Contact Staggered/ GEN-X Fiber Optics/ /RF/Power Options/Access./ VME/VITA(VIPER) HSB3 HDB3 HSB 3 - HIGH SPEED SERIES 3.15 GBS High speed con!guration available that allows data rates up to 3.15 Gb/s via 100 ohm matched impedance differential pairs. Partially populated standard HDB3 mother board and daugher board bodies Contact an Amphenol sales engineer for validation results HSB 3 HIGH SPEED MOTHER BOARD - HOW TO ORDER Mates with: Number No. Low Differential Speed Dimension Dimension Pairs Signals A C D 4. Wire Plating 6. Contact Termination Finish 5 6 High Speed Daughter Board 1. Connector Type HSB-M4 Gold plated in accordance with MIL-G-4504, Type II, Min. thick Gold over Min. thick Nickel Tin plated in accordance with ASTM B545, Min. thick Matte Tin over Min. thick Nickel Tin-Lead plated in accordance with SAE-AMS-P-8178, Min. Tin-Lead over Min. thick Copper Number of Differential Pairs Differential Signal Wire Plating Termination Contact Amphenol for more information at Contact Termination Finish Less Hardware (Purchased separately see pg XX for hardware options) HSB-M4-03 D M 4 X Designates High Speed HDB 3 I/O Connector. Number of Contacts 3. Differential Signal M Au Min. thick over Nickel C Au Min. thick over Nickel 5. Termination Type Stickout (Dim. E) PCB, Straight,.016 Dia PCB, Straight,.016 Dia PCB, Straight,.016 Dia PCB, Straight,.016 Dia PCB, Straight,.016 Dia Amphenol & High Speed HSB 3 Mother Board Connector DIMENSIONAL DRAWING & HOW TO ORDER 7. Hardware X Less Hardware Hardware is purchased separately (see page 57 for hardware options).
9 Amphenol & High Speed HSB 3 Daughter Board Connector DIMENSIONAL DRAWING & HOW TO ORDER HSB 3 HIGH SPEED DAUGHTER BOARD - HOW TO ORDER Mates with: HSB-D4 Designates High Speed HSB 3 Daughter Board No. Low Number Diff Pairs Speed Dimension Dimension Signals A D Differential Signals D 4. Wire Plating M Au Min. thick over Nickel C Au Min. thick over Nickel Type Stickout (Dim. E) 01 PCB, Right Angle,.016 Dia PCB, Right Angle,.016 Dia PCB, Right Angle,.016 Dia PCB, Right Angle,.016 Dia PCB, Right Angle,.016 Dia Contact Termination Finish 5 6 High Speed Mother Board 1. Connector Type. Number of Contacts 5. Termination Gold plated in accordance with MIL-G-4504, Type II, Min. thick Gold over Min. thick Nickel Tin plated in accordance with ASTM B545, Min. thick Matte Tin over Min. thick Nickel Tin-Lead plated in accordance with SAE-AMS-P-8178, Min. Tin-Lead over Min. thick Copper Number of Differential Pairs Differential Signals Wire Plating Termination Contact Termination Finish Less Hardware (Purchased separately see pg 10 for hardware options) HSB-D4 03 D M 0 X 7. Hardware X Less Hardware Hardware is purchased separately (see page 57 for hardware options). Contact Amphenol for more information at Contact Staggered/ Fiber Optics/ Options/Access./ GEN-X HiSpeed/RF/Power VME/VITA(VIPER) HDB3 HSB3 53
10 Contact Staggered/ GEN-X Fiber Optics/ /RF/Power Options/Access./ VME/VITA(VIPER) Amphenol & High Speed HSB 3 ARRANGEMENTS 40 Pin Body with 3 Differential Pair, 0 Signal Contacts 80 Pin Body with 7 Differential Pair, 40 Signal Contacts 60 Pin Body with 5 Differential Pair, 30 Signal Contacts HSB3 HDB3 10 Pin Body with 10 Differential Pair, 60 Signal Contacts 160 Pin Body with 13 Differential Pair, 80 Signal Contacts As viewed from front of daughter board connector 100 Ohm Differential Pair Contacts (100 Ohm Differential contact pairs capable of 3.15 Gb/s data rates) Empty Contact Cavity Digital, Low Speed Signal Contacts 54 Contact Amphenol for more information at
11 Amphenol & High Speed HSB 3 RECOMMENDED BOARD LAYOUT - HSB 3 DAUGHTER BOARD HSB 3 DAUGHTER BOARD Contact Staggered/ Fiber Optics/ Options/Access./ GEN-X HiSpeed/RF/Power VME/VITA(VIPER) HDB3 HSB3 Contact Amphenol for more information at
12 Contact HSB 3 MOTHER BOARD Amphenol & High Speed HSB 3 RECOMMENDED BOARD LAYOUT - HSB 3 MOTHER BOARD Staggered/ GEN-X Fiber Optics/ /RF/Power Options/Access./ VME/VITA(VIPER) HSB3 HDB3 56 Contact Amphenol for more information at
13 Amphenol & High Speed HDB 3 & HSB 3 HARDWARE FOR BOTH HDB 3 AND HSB 3 HARDWARE FOR ALL CONFIGURATIONS (Sold Separately) MOTHER BOARD PART NUMBER TYPE STICKOUT HDB POLARIZATION KEY (QTY ) 0.50 HDB POLARIZATION KEY (QTY ) HDB POLARIZATION KEY (QTY ) HDB GUIDE PIN (QTY ) 0.50 HDB GUIDE PIN (QTY ) HDB GUIDE PIN (QTY ) HDB THREADED BOSS (QTY )* 0.50 HDB THREADED BOSS (QTY )* HDB THREADED BOSS (QTY )* HDB LOCKING GUIDE PIN (QTY ) 0.50 HDB LOCKING GUIDE PIN (QTY ) HDB LOCKING GUIDE PIN (QTY ) * Required with Mother Board only when mating to I/O Connector PART NUMBER TYPE HDB POLARIZATION KEY (QTY ) EXPLODED ISOMETRIC VIEW DAUGHTER BOARD HDB LOW PROFILE MOUNTING NUT (QTY ) Accepts I/O Connector Jack Screw Shown with Mother Board Connector on page X Contact Staggered/ Fiber Optics/ Options/Access./ GEN-X HiSpeed/RF/Power VME/VITA(VIPER) HDB3 HSB3 Contact Amphenol for more information at
High Density HDB 3 /HSB 3 Connectors
HB 3 /HSB 3 onnectors TBL OF ONTNTS HB 3 and HSB 3 onnectors Table of ontents.............................7 Introduction - Features, Options, Performance... 8, 9 HB 3 HB 3 Mother Board onnector... 0 HB
More informationAmphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. UHD FEATURES & BENEFITS 0.100 x 0.050 staggered grid - High density optimizes trace routing through the backplane
More informationMCX Connectors. Alphabetical Index. Johnson Components P.O. Box 1732 Waseca, MN Fax:
MCX Connectors Alphabetical Index 133-3701-201 3 133-3701-206 3 133-3701-211 3 133-3701-216 3 133-3701-221 3 133-3701-226 3 133-3701-231 4 133-3701-236 4 133-3701-301 5 133-3701-306 5 133-3701-311 5 133-3701-316
More informationConnectors. High Performance to 65 GHz. Applications. PDF Volume 1. Click Here for Table of Contents Click Here for Specifications
SMP/SMPM Applications DELTA ELECTRONICS MANUFACTURING CORP. Connectors High Performance to 65 GHz PDF Volume 1 Click Here for Table of Contents Click Here for Specifications (978) 927-1060 FAX (978) 922-6430
More informationLMD and LMS Modular Connectors
LMD and LMS Modular Connectors TABLE OF CONTENTS Amphenol LMD & LMS Modular Connectors Table of Contents............................... Introduction - Features, Benefits, Performance..00 Features, Options
More informationAmphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
More informationSMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
More informationSECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
More informationPIN CONTACT MATING FACE
Differential Twinax Contacts General Description AMPHENOL DIFFERENTIAL TWINAX CONTACTS Offer several advantages for high data transfer rates, low power consumption and excellent EMI compatibility: Two
More information2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805
M Series Selection Table M0, M0, M0 and M0 SERIES M0 M0 M0 M0 PAGES Page -0 Pages - Pages - Pages -0 TYPE Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread DESCRIPTION More rugged keys and
More informationLine Replaceable Module (LRM)
Line Replaceable Module (LRM) TABLE OF CONTENTS LRM Table of Contents................................ 9 Introduction - LRM Styles and Design Flexibility...10 LRM Product Evolution...11, 12 Leads in Board
More informationSeries PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
More informationGMS Interconnect Series Product Information
GMS Interconnect Series Product Information Microwave Products Product Features: Frequency range: DC up to 23 GHz, Force to engage/disengage: 10 ounces min./2.5 pounds max., Male connectors have full self-centering
More informationINCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7
More informationIn-Series and Between-Series Adapters SMA
Adapters SMA In-Series and Between-Series Adapters SMA If your choice of SMA Adapter is not shown in this section, please refer to the Table below to determine other possible locations. Should you not
More informationDura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
More informationModular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/65H 3 February 2004 SUPERSEDING MIL-C-55302/65G 8 April 1993 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE
More informationApplications & Features, Type SSMP When using blind mate connectors in an application, careful consideration has to be given to choosing the right con
SSMP Push-On Connectors & Adapters THE SSMP (Sub-Sub-Miniature-Push-On) is a 1.7 mm connector, using solid dielectric interface. The connector is 70% of the size of the SMP and therefore allows even higher
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
More informationSMA - 50 Ohm Connectors
Alphabetical Index 142-0701-201 4 142-0701-206 4 142-0701-231 4 142-0701-235* 4 142-0701-236 4 142-0701-301 5 142-0701-306 5 142-0701-335* 6 142-0701-421 5 142-0701-426 5 142-0701-491 5 142-0701-496 5
More informationSMA SERIES COAXIAL CONNECTORS
General Information Features Part Number Index Applications Coupling types and interface mating dimensions Semi-rigid conformable cable connectors Flexible cable connectors Connectors for modules Bulkhead
More information8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
More informationSMA - 50 Ohm Connectors
142-0701-621 4 142-0701-626 4 142-0701-631 4 142-0701-636 4 142-0701-701 7 142-0701-706 7 142-1701-011 5 142-1701-016 5 142-1701-031 4 142-1701-036 4 142-1701-041 5 142-1701-046 5 142-1701-121 5 142-1701-126
More informationThe Custom Interconnect Leader
7-16 Series.354.276.843.811 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: 50 ohms DC to 7 GHz 2,700 volts
More informationThe Custom Interconnect Leader
SC Series.337.307.040.003.085.194 MIN FLARE TO MEET GAGE TEST.276 MIN.549.781 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR:
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationSeries SMPM-T. Description. Compatibility. Content. Interface dimensions (mm/inches) SMPM-T male (pin contact), smooth bore
Series Description The is the smallest threaded open source connector on the market. Its unique and innovative combination of a MIL- STD-348 SMPM female interface connector together with a retractable
More informationPrices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by Lighthorse Technologies, Inc.
Section Index Connectors Specifications... 93 Flexible Cable... 95 Panel Mount... 99 Bulkhead... 100 PCB Mount... 101 In Series Adaptors... 103 Other Information Assembly Instructions... 176 Cable Assembly...
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/64H 21 June 2016 SUPERSEDING MIL-DTL-55302/64H w/amendment 1 31 March 2011 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET
More informationGanged Board to Board SMP Solutions. Catalog. belfuse.com/cinch
Ganged Board to Board SMP Solutions Catalog belfuse.com/cinch SMP CONNECTORS One of the key benefits of the SMP connector interface is its use in high frequency blind-mate applications. The design of the
More informationBoard Level and Rectangular Interconnects
12-R3 Board Level and Products for Military, and Harsh Environments Options Options Fiber Optics & Power Options Hybrids Termination Options PCB Tail Crimp Compliant Pin Flex Termination Surface Mount
More informationFISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
More informationProduct Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationSMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data
SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for
More informationCannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationSMP. Description. Compatibility. Content. Interface dimensions (mm/inches) SMP female. Interface dimensions conformable to the following standards:
Description Compatibility HUBER+SUHNER Astrolab connectors provide a robust, proven and fully compatible plug-in solution for applications up to 40 GHz. HUBER+SUHNER Astrolab connectors have been MIL-SPEC
More informationXH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More information.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
More informationPRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
More informationOur Most Important Connection is with You. SECTION 3. Board-to-Board: MMBX / SMP-MAX R223 / R222M
SECTION 3 Board-to-Board: MMBX / R223 / R222M Contents MMBX Introduction... 3-4 Interface... 3-5 Characteristics... 3-6 Plugs... 3-7 PCB receptacles... 3-7 to 3-8 Adapters... 3-9 Demo board... 3-10 Panel
More informationElectrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
More informationHIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationIP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationMating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationMicro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationAmphe-Lite Series contacts, sealing plugs, plastic dust caps
contacts, sealing plugs, plastic dust caps STANDARD CONTACTS FOR AMPHE-LITE SERIES Pin Socket 8 (Coax) 21-33102-21 21-33101-21 8 (Twinax) 21-33190-529 21-33191-530 10 (Power) 10-251415-105 10-407035-105
More informationFiltered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
More informationRTX series EN
RTX series EN3716 10 CONTENTS RTX series Page RTX series Introduction... 10-4 Applications... 10-4 Product overview... 10-5 Technical characteristics... 10-6 & 10-7 How to order connectors... 10-8 Dimensions
More informationVITA 67 Series. Ideal For Blind Mate Applications. Electrical, Mechanical & Environmental Specifications
VITA 67 Series Delta Electronics Manufacturing Corp. introduces 4 position (VITA 67.1) and 8 position (VITA 67.2) RF connector housings designed for 3U and 6U formats within the OpenVPX architecture. Ideal
More informationSERIES MCX 50 MICRO MINIATURE CONNECTORS
SERIES MCX 50 MICRO MINIATURE CONNECTORS DESCRIPTION CONTENT PAGE HUBER+SUHNER MCX micro miniature snap-on connectors offer you an excellent blend of size, weight, durability and performance for applications
More informationHPH CONNECTOR SERIES
HPH CONNECTOR SERIES High Density Signal Connectors Hyperboloid Technology Smiths Connectors offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac
More informationXC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
Series 0 Mighty Mouse ouble-start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Rear Panel Jam Nut Mount Shell Style 0 Square Flange Mount Shell Style 0// In-Line Shell Style 0 How
More informationMULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
More informationEN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
More informationCorona 70,000 Ft. Permeability Risetime Degradation (Mated Pair) 2.0 max MH z
NDL Ultraminiature Triaxial Connectors Connector Specifications Interface Dimensions Ø.020 Ø.082 Ø.168 Ø.162 Electrical Specifications Dielectric Center contact to intermediate contact: 1000 Vrms min Withstanding
More informationM-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationOSMP Microminiature Push-On Coaxial Connectors
Introduction Features Intermateable with Gilbert GPO Series Enhanced performance features Simplified ssembly etween Series dapters For OSMP etween Series dapters, see Page 438. OSMP microminiature push-on
More informationSMA Series - Crimp Plug and Jack
Plug Features: SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance. These devices offer broadband performance with low reflection. These properties, along
More informationtriaxial CONtaCts Overview Features
triaxal CONtaCts triaxial CONtaCts Overview Smiths Connectors concentric twinax/triax contacts provide flexibility in the design of high speed data systems. The contacts, including the unique sizes 10
More informationR-SATA Speeds to 6.25 Gb/s +
R-SATA CONNECTORS The new (Rugged) R-SATA style connector is perfectly suited as the primary internal storage interconnect for desktop and mobile PCs, connecting the system to peripherals such as hard
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
More informationMicrominiature Relay Sockets. Board Mount Relay Sockets
MIL-PRF-883 MIL-PRF-883 offers the industry s broadest line of pluggable relay sockets for commercial and miltary airborne, ground and shipboard equipment. Sockets are to MIL-PRF-883 specifications, plus
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
More informationCatalog C-035 Rev. C
Catalog C-035 Rev. C P O S I T R O N I C I N D U S T R I E S Today, some customer applications have requirements for high bandwidth transfer between VMEbus cards. Requirements which even the most updated
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
More informationN Series Connectors Medium sized connector for high-voltage applications Suited for critical applications and environments Performance to 11 GHz (commercial) and 18 GHz (hi frequency) Intermateable with
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-553/3F w/amendment 8 July 7 SUPERSEDING MIL-DTL-553/3F May 6 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, 3 thru CONTACT POSITIONS,
More informationAPPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
More informationµcom-10gb + MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors Amphenol Socapex
Harsh Environment 10Gb Ethernet Micro Connectors 15mm µcom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the highest resistance
More informationIntroduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
More informationSMA Connectors Series
SMA Connectors Series Content Page Description.. 2 Interface Dimensions.. 2 Interface Dimensions in mm/inches.. 2 Characteristics. 3 Cable Connectors 4 PCB Connectors 11 Panel Receptacles.. 13 Adapter
More informationD-SUBMINIATURE (D-SUB) ECONOMY RANGE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE (D-SUB) OVERVIEW FCI s D-Subminiature (D-Sub) connectors are part of an industry standard for applications requiring robust and reliable connectors. These proven
More informationAMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationTNC SERIES Miniature Coaxial Connectors
SERIES Miniature Coaxial Connectors FEATURES connectors, medium sized coaxial connectors with thread coupling, are designed for applications where extreme vibration is encountered.the increased rigidity
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Plug
Series 0 Mighty Mouse ouble-start ACME Thread Plug 0-00 and 0-00 Ordering Information Series 0 Series 0 Mighty Mouse Connector features a double-start modified stub ACME mating thread for improved protection
More informationIntroduction. Quadrax Contacts, Connectors and Cables. Product Facts
Introduction Product Facts n 2 mm centerlines n Designed per ARINC 600 Supplement 18 n Fits into keyed connector inserts for connectors such as: ARINC 404 & 600, General Purpose Rectangular (GPR), MIL-DTL-38999
More informationSECTION 1 IMP / UMP R107
1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11
More informationUSB Type-C TM Connector DX07 Series Receptacle. 2 row SMT Hybrid
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Receptacle CONNECTOR MB-0297-3 December 2015 RoHS Compliant 2 row SMT Hybrid On-board Type Mid-mount Type On-board Type Mid-mount
More informationPower Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
More informationTerminal Junction System (MIL-T and Commercial)
Introduction Product Facts The TJS connections are inherently more reliable than conventional threaded and solder terminations. The user s wiring is crimped to gold plated pin contacts, conforming the
More informationSFP Single Port Multi-Port Ganged
Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar
More information1.27mm Pitch Two-Piece Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationCMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
More information2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationOSFP Connector Cage & Cable System
PAGE /6 /5/7 UNRESTRICTED OSFP Connector Cage & Cable System PAGE /6 /5/7 UNRESTRICTED.0 SCOPE This Product Specification covers performance, test and quality requirements for the JPC Quad Small Form Factor
More information2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted
More informationUSB Type-C TM Connector DX07 Series Receptacle
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Receptacle CONNECTOR MB-0297-4 December 2016 RoHS Compliant 2 Row SMT Hybrid The DX07 Series are connectors compatible
More informationMX62 Series. Right Angle Pin Connector Socket Connector In-line connector
COMPONENTS PRODUCT INFORMATION NEW USB3.0 High-speed Transmission Connector for Automotive MX62 Series CONNECTOR 2015/7/27 RoHS Compliant Right Angle Pin Connector Socket Connector In-line connector Along
More information