Gazer VI700A-NTG45 and VI700W-NTG45 INSTALLATION MANUAL
|
|
- Alisha Simmons
- 6 years ago
- Views:
Transcription
1 Gazer VI700A-NTG45 and VI700W-NTG45 INSTALLATION MANUAL
2 Contents List of compatible cars with preinstalled stock Mercedes Command Online NTG 4.5 and Mercedes Audio 20 NTG 4.5 multimedia interfaces... 3 Package contents... 4 Mounting and connection... 6 Special information... 7 Car interior disassembly and connection guide for Mercedes ML Troubleshooting
3 We congratulate you on purchasing Gazer VI700 multimedia interface. Please, read this manual carefully before using the product. Precautions 1. To install and connect the product without voiding your vehicle warranty, please contact an authorized service station. 2. The car battery must remain disconnected during the entire installation procedure. 3. To install the product, use only original sensors and wires that come in the package. 4. Do not attempt to repair the product by yourself. In case of malfunctions, please contact the maintenance center. 5. Avoid hitting, dropping, and damaging the product mechanically. 6. The manufacturer reserves the right to change product specifications and/or configuration without prior notice. 7. The product exterior design as well as the number and design of components may differ from those specified in the manual. 2
4 List of compatible cars with preinstalled stock Mercedes Command Online NTG 4.5 and Mercedes Audio 20 NTG 4.5 multimedia interfaces A class (W176) B class (W246) C class (W204) C class Coupé (C204) CLA Coupé (C117) CLS Coupé (C218) E class (S/W212) E class Coupé (C207) G model (G463) GL class (X166) GLA class (X156) GLK class (X204) ML class (W166) SLK - class (R172) SL - class (R231)
5 Package contents Central unit Power and CAN bus connection cables Stock monitor connection cable Video-in cable Audio-in/out cable Remote mode switching button CAN bus signal processing unit 16GB Gazer micro SDHC memory card GPS antenna Microphone 4
6 Remote cable with a USB port Touch panel connection cable Touch panel (optional) Power cable AUX cable Cable for connection to a standard AUX input port and a separate speaker Remote speaker User manual Warranty card 5
7 Mounting and connection Installation tips: Before installing the video interface, please disconnect the terminal from the car battery. To install the video interface, use only the cables that come in the package. Make sure that there are no electronic devices or magnets near the central unit mounting location. To install and connect the video interface without voiding your vehicle warranty, please contact an authorized service station. After receiving the product, check the contents of the delivery package against specifications. Contact the vendor if you find that some component or part is missing. The warranty does not cover the damage caused due to improper handling of the product by the user, installation company or service station. The manufacturer reserves the right to modify the design and configuration of the product without prior notice to the user. 6
8 Special information Video interface connection The product supports Plug&Play ("jack-to-jack ) connection to LVDS cable between the stock multimedia system and the monitor. Note. Video interface is connected without damaging stock wiring and there is no need to modify stock cables and jacks. To control the video interface, one needs to install an optional 7 touch panel (glass\plastic). Switching between modes To enable the video interface display mode and switch between its operating modes, one can do the following: Press and hold NAV / BACK / FAVORITE keys on the control panel. Press the remote button (comes in the package). Configuring DIP switches on the video interface body Switch No. ON (down position) OFF (up position) 1. RGB input On Off 2. AV1 input On Off 3. AV2 input On Off 4. RGB input display resolution 5. Camera selection 800X480 If the vehicle has a rear view camera connected to the video interface Toggle down once for IR 480X240 If the vehicle has a factory-installed rear view camera 6. Programming or calibration mode programming Normal use 7. Not usable - Always up 8. Not usable - Always up 7
9 Display configuration buttons on the lower panel There are Menu, +, and buttons on the video interface lower panel that one can use to configure how the image from the video interface will be displayed. To access the image settings menu, press and hold Menu" button, which will bring up the settings window. Use "Menu" button to switch between menu items and "+", and " " buttons to change settings. Contrast: image contrast adjustment. Brightness: image brightness adjustment. Saturation: image saturation adjustment. Position-H: horizontal image adjustment. Position-V: vertical image adjustment. IR-AV1/AV2: IR control settings menu for devices connected to AV1/AV2. When"None" value is set, control buttons will not pop up when you tap the touch panel. Guide-L: parking guide line position adjustment. Ui-CNTRL: switching PDC and IPAS functions on / off. Guide-CNTRL: switching parking guide lines on / off. H-SIZE: horizontal image size adjustment. V-SIZE: vertical image size adjustment. Note. Depending on the car model, the type and the number of settings may vary. 8
10 Touch panel calibration One needs to calibrate the touch panel to ensure its correct operation. Calibration menu pops up automatically when you switch on the video interface for the first time. To calibrate the touch panel, tap the icons appearing on the screen as accurately as possible. Once the calibration procedure is complete, press Android logo (for Gazer VI700A-PCM31 model) or OK button (for Gazer VI700W-PCM31 model). Caution! If the SD card slot is empty or DIP switch No. 6 is set to "On", the touch panel calibration procedure will have to be repeated on every startup. Audio connection There are several ways one can arrange audio playback from the video interface: 1. Connection via Bluetooth in audio transmission mode (for VI700A-PCM31 only). To do this, connect the stock multimedia system to the video interface via Bluetooth. Then select Only audio in the video interface Bluetooth settings. This is required for correct operation of Hands-Free function when a mobile phone is connected to the stock stereo system. In this case, when the engine is running and all equipment is fully operational, two devices (the phone and the video interface) will be simultaneously connected to the stock stereo system. The phone will operate in Hands-Free mode, while the video interface will playback all navigation system voice prompts as well as audio tracks. 2. AUX input connection. In this case, the audio output of the video interface ( AUX jack) is connected to the AUX jack of the stock multimedia system. Depending on the car model, such connection requires reconnecting the AUX cable (from the car stereo jack) on each multimedia system startup and then selecting the AUX audio source in the stereo system menu. 9
11 Car interior disassembly and connection guide for Mercedes ML Turn the ignition off. Use hook tool 01 to loosen the upper edge of N22/7 automatic climate control panel. Use long wedge tool 02 to loosen the lower edge of N22/7 automatic climate control panel and pull it out of the front panel. Detach electric slip connectors 3. 10
12 Remove N22/7 automatic climate control panel. Unscrew bolts 2. Move retainers 3 all the way down. Pull audio module А2 and COMAND А40/3 control and indication panel out of the dashboard to ensure free access to electric plug-in connectors and the fiber optic cable socket connector. Unplug the electric plug-in connector on the side of upper control panel 5. Unplug the electric plug-in connector and fiber optic cables on the reverse side of audio module А2 or control module COMAND А40/3. Release the clamps and extract audio module А2 or control module COMAND А40/3. Unscrew screws 4 from the demounted audio module А2 or control module COMAND А40/3 and remove upper control panel 5. Unscrew bolts 3 on central air vent deflector 1. Insert hook tool 01 above central air vent deflector 1. Release central air vent deflector 1. 11
13 Unscrew bolts 3. Pull COMAND A40/8 audio system display out of the upper dashboard section to ensure free access to electric wires 2. Detach electric wires 2. Remove COMAND A40/8 audio system display. Remove the right protective enclosure under the front panel. Disconnect hose 3 from air conditioning system casing 4. Use a wedge tool to remove side trim 2 on the front panel. 12
14 Unscrew bolts 5. Open glove compartment 1. Unscrew bolts 6 on the side edge. Unscrew bolts 7 in glove compartment 1. Keep carefully pulling glove compartment 1 out until electric plug-in connectors are accessible. Unplug glove compartment 1 electric plug-in connectors. Release the electric wire with an appropriate tool. Remove glove compartment 1. Detach protective cover 2 in B-pillar trim 1 area. Loosen cover 3 with a wedge tool. Unscrew the bolt and nut 4. Lever out B-pillar trim 1. Pull B-pillar trim 1 upward from the guide on the front panel. Detach internal protective cover 1 from external protective cover 2. Unplug the electric plug-in connector from Tele Aіd alarm call key 6. Loosen external protective cover 2. Detach ceiling control panel 5 to provide access to electric plug-in connectors 7. 13
15 Install the remote microphone in the ceiling panel securing it with plastic ties to the main wiring harness. Place the remote GPS antenna in the B-pillar bottom-left corner and secure it with 3М adhesive tape. Jacks 1 (LVDS-out) and 2 are used for video interface connection
16 One needs to disassemble the display for touch panel installation. There are several display size options for these multimedia systems. To select the correct touch panel, one needs to measure the display size in inches and then find a matching touch panel. The touch panel is installed between the plastic panel and the display image sensor. The panel must be secured with adhesive tape prior to installation. 15
17 No image/ black screen (manufacturer image). Troubleshooting Malfunction Cause Possible solution Not all plugs have been connected to the stock head Connect the remaining unit or monitor after installation. plugs. No power supplied to CAN unit (not all CAN unit LEDs lite up). No image/ black screen / white image (picture insert) or manufacturer logo is displayed incorrectly. Incorrect image size or positioning. Inserted image is doubled or 4 pictures are displayed on the monitor. Inserted image is distorted, flickering, or displayed in black and white. CAN unit is connected to CAN bus in a wrong place. No power supplied to the video interface (not all video interface LEDs light up). No image from the video source. Video source is not connected to the selected video interface input. LVDS is connected in a wrong place. Incorrect video interface image display settings. Video sources connected to the video interface operate in different video signal standards. Check CAN unit power supply. Check CAN bus and CAN unit connectivity. Consult the manual for information about CAN bus connection. Check whether CAN unit is connected properly. + 12V (ACC) voltage must be supplied to the red wire output on CAN unit terminal. Check the video signal on a different monitor. Check whether the settings of video interface DIP switches 2 and 3 matches the configuration of connected devices. Check how LVDS cables are connected; consult the manual if needed. Change the combination of video interface DIP switches 7 and 8. To ensure correct application of modified settings, reconnect the power supply every time you change the position of DIP switches. Use image configuration buttons available on the video interface. Set the same video signal standard for all video sources (PAL or NTSC). If the error occurs only after the video source is turned on. Use one video standard for all video sources. Some video interfaces can process NTSC video signal only. Set the video source to NTSC standard. Poor quality image. Incorrect image settings. Use 3 buttons on the video interface body to configure image display parameters. Incorrect image size. Incorrect image positioning. Black screen instead of camera feed. Camera draws power directly from the reverse light. Use an extra relay to ensure signal stability. 16
18 Distorted camera feed. Unable to configure the backup camera image. Camera image configuration is available in AV2 mode only. Set video interface DIP 3 switch to ON (if AV2 input is not activated yet) and connect the camera to AV2. Then switch to AV2 and configure the image parameters. After that, connect the camera to the camera input and disconnect AV2 with a DIP switch if this input is not in use. The display shows parking guide lines although no parking sensors are installed. Video interface operating modes fail to change when the stock button is pressed. The interface fails to switch to camera input when the reverse gear is engaged. Video interface switches between video sources on its own. PDC function is enabled in the video interface image settings. CAN unit does not support changing video interface operating modes with the stock button in this vehicle. Button presses are too short. CAN bus does not support this function for this vehicle. CAN unit compatibility for this vehicle is limited. Parking sensor guide lines are displayed in compatible cars only. If you do not need this function, disable it in UI- CONTROL menu. Use an external button for switching between modes. You can also use the CAN unit white wire to switch between video sources. This requires supplying it with + 12V of power. A longer button press (about 2.5 seconds) is required to switch to another video source. Cut the green wire connecting CAN unit with the video interface and supply + 12V from the reverse light. Use an extra relay for a stable signal. Cut the gray wire coming from CAN unit and insulate both of its ends. If the problem persists, cut the white wire as well. 17
GMNAV1 Advent Integrated Navigation
GMNAV1 Advent Integrated Navigation This interface is designed to integrate Navigation into select Buick and Chevrolet Systems. INSTALLATION MANUAL What s in the Box The following items are supplied with
More informationNTG3 / NTG3E /NTG3SLK NTV-KIT102/106/189. Overview up Mercedes GL/ML/R/E/CLS/SLK. Backup camera / AV input / RSE / Video In Motion interface
NTG3 5.04.14 NAV-TV 3950 NW 120 Ave, Coral Srings, FL NTG3 / NTG3E /NTG3SLK NTV-KIT102/106/189 Overview 2009-up Mercedes GL/ML/R/E/CLS/SLK Backup camera / AV input / RSE / Video In Motion interface Kit
More informationW204-N RVC NTV-KIT704
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com W204-N RVC NTV-KIT704 Overview The W204-N RVC Kit interfaces a backup camera input (with active
More informationFN-MAZDA3 Installation Manual
Manual Version: V20150401 FN-MAZDA3 Installation Manual Product Name: FN-Mazda3 Product Type: Interface with build in navigation Application: All Mazda 2014/2015 cars with new Mazda Connect systems What's
More informationCompatible with GM CUE, MyLink and IntelliLink Infotainment Systems with 8 and 10.2 screens. NAVGM-80R MODULE CAN BOX AND HARNESS GPS ANTENNA
Plug and Play connectors make installation simple and easy. Utilizes the latest Navigation mapping version of igo Primo. Adds 2 AV inputs. Utilizes Cortex A6 high speed processor. Maintains the OEM touch
More informationBMW12-DYNAMIC KIT NTV-KIT462
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com BMW12-DYNAMIC KIT NTV-KIT462 Overview The BMW12 kit allows the user to add up to 3 video inputs
More informationCI-VL2-MBN45. for Mercedes Benz vehicles generation NTG with Comand Online, Audio50 APS or Audio 20 with 4pin HSD LVDS connector on the monitor
v.link Video-inserter CI-VL2-MBN45 for Mercedes Benz vehicles generation NTG4.5-204 with Comand Online, Audio50 APS or Audio 20 with 4pin HSD LVDS connector on the monitor Video-inserter with 2 video +
More informationDODGE Challenger Charger Journey. 6-Pin Video Input Cable 6-Pin Audio In/Out Cable GPS Magnetic Antenna
CHRYSLER 2011-2014 300c DODGE 2011-2014 Challenger 2011-2014 Charger 2011-2014 Journey FIAT 2011-2014 Freemont Plug and Play connectors make installation simple and easy. Utilizes the latest mapping version
More informationNTG3-SL NTV-KIT142. Overview Mercedes-SL. Backup camera / AV input / RSE / Video In Motion interface. Kit Contents. NTG3 Module NTV-ASY171
NTG3 5.04.14 NAV-TV 3950 NW 120 Ave, Coral Srings, FL NTV-KIT142 Overview 2009-2011 Mercedes-SL Backup camera / AV input / RSE / Video In Motion interface Kit Contents SMB to RCA NTV-CAB007 Plug & Play
More informationNavigation interface for Jeep GC 5 RA2 NTV-KIT581
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 NNG-Jeep GC Navigation interface for Jeep GC 5 RA2 NTV-KIT581 NNG-JEEP GC Kit Content 5 1 6 4 7 2 3 1. 2. 3. 4. 5. 6. 7. 8.
More informationFDS3NAV2. For Ford Vehicles Equipped With SYNC3. Installation Instructions. Calibration and Setup Guide. Page 1 of 14
FDS3NAV2 For Ford Vehicles Equipped With SYNC3 Installation Instructions Calibration and Setup Guide Page 1 of 14 Please read this manual thoroughly before installation. This manual illustrates a typical
More informationVehicle Applications. Features. Radio Compatibility. Note. Parts Included. Wiring Diagram
Vehicle Applications BMW 1 SERIES 2011 - Up 1 Series (5 Door) 2012 - Up 1 Series (3 Door) Features 3 SERIES 2012 - Up 3 Series Sedan 2012 - Up 3 Series Wagon 4 SERIES 2013 - Up 4 Series Coupe 2013 4 Series
More informationMazda Connect Infotainment System
- The ACPMZ-72Z has a built in Dual-Link module that allows connection of Android and other devices with two-way mirroring control. - Adds a reverse camera input with active parking guidelines. - Adds
More informationJaguar F-TYPE CAM Dual Camera interface for select 14+ Jaguar vehicles NTV-KIT589
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 Jaguar F-TYPE CAM Dual Camera interface for select 14+ Jaguar vehicles NTV-KIT589 BHM Overview Jaguar F-TYPE CAM interfaces
More informationInstruction Manual High-Definition Link for Mercedes-Benz IW04M
Instruction Manual High-Definition Link for Mercedes-Benz Model Name IW04M IW04M-HNRAA Latest Firmware Date 2014-12 - 02 Manual Version Rev. 3.1 Release Date: 2015-05 - 12 Language English Contents Cautions
More informationVL2-MBN4.
v.link Video-inserter for Mercedes Benz vehicles generations NTG3, NTG4 with Comand APS, Audio50 APS or Audio 20 with 10pin HSD LVDS connector on the monitor Video-inserter with 2 video + RGB + rear-view
More informationVL2-CONCERT. for Audi with 6,5 monitor, Symphony or Concert radio
v.link Video-inserter for Audi with 6,5 monitor, Symphony or Concert radio Video-inserter with 2 video + RGB + rear-view camera input Product features Video-inserter for factory-infotainment monitors 2
More informationW204-5 NTV-KIT198. Overview
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com W204-5 NTV-KIT198 Overview The W204-5 Kit allows the user to add up to 3 video inputs and a
More informationCompatible with Cadillac CUE, GM MyLink (io3, io5 & io6) Infotainment Systems with 4.3 and 8 screens. ACPGM-80V MODULE CAN BOX CUE Harness
The ACPGM-80V has a built in Dual-Link module that allows connection of Android and other devices with two-way mirroring control. Adds a reverse camera input with active parking guidelines. Adds 2 Audio/Video
More informationTM LOCKPICK C8 INSTALLATION OPTIONS COPYRIGHT 2011 COASTAL ELECTRONIC TECHNOLOGIES, INC. UNPLUG ORIGINAL RADIO CONNECTORS THEN PLUG IN HERE
TM LOCKPICK C8 INSTALLATION OPTIONS COPYRIGHT 2011 COASTAL ELECTRONIC TECHNOLOGIES, INC. FACTORY CONNECTORS INCLUDED UNPLUG ORIGINAL RADIO CONNECTORS THEN PLUG IN HERE PLUG AND PLAY NO OTHER CONNECTIONS
More informationFV Benz 172 installation manual_ver
FV Benz 172 installation manual_ver.1107020 This interface can insert RGB navigation or CVBS video signals onto Benz A172 car screens. And it has these features: Original Knob to switch the inputs, and
More informationNOTICE OF INTENDED INSTALLATION AND USE
* JBL Audio equipped vehicles will require additional part # DP-TYJBL1 audio interface. NOTICE OF INTENDED INSTALLATION AND USE THE ROSEN MULTI-MEDIA NAVIGATION SYSTEMS CONTAIN AN INTERNAL VIDEO PLAYER,
More informationW205-N RVC NTV-KIT703
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com W205-N RVC NTV-KIT703 Overview The W205-N RVC Kit interfaces a backup camera input (with active
More informationVL2-C5. for Citroen C5 and Peugeot 508 with navigation with colour display and 10pin LVDS monitor connector
v.link Video-inserter for Citroen C5 and Peugeot 508 with navigation with colour display and 10pin LVDS monitor connector Video-inserter with 2 video + RGB + rear-view camera input and CAN control Product
More informationAUDI DYNAMIC-EXT NTV-KIT701
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com AUDI DYNAMIC-EXT NTV-KIT701 Overview The AUDI-DYN EXT Kit interfaces a backup camera (with dynamic
More informationW DYNAMIC Kit NTV-KIT461
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com W204-12 DYNAMIC Kit NTV-KIT461 Overview The W204-12 DYNAMIC kit allows the user to add up to
More informationfor the BIMMERTECH Multi Media Interface with HDMI inputs and additional video sources like front/rear cameras and SmartView mirroring devices
Installation Instructions for the BIMMERTECH Multi Media Interface with HDMI inputs and additional video sources like front/rear cameras and SmartView mirroring devices BMW F30/F80 Phone: +1(646) 439-7920
More informationChapter 1 Getting Started
Chapter 1 Getting Started Installation Instructions 1.1 Subject The NEO AUX adapter an integration between an MP3 player and a factory installed car stereo. Equipped with the specific vehicle harness and
More information- Compatible with 8 and 10.2 monitor.
- Rear-view camera input. - Front-view camera input. - Front-view camera and AV Inputs can still be used even if vehicle is equipped with an OEM rear view camera. - Provides an HMDI Input for Navigation
More informationMY-CUE-Kit NTV-KIT457
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com MY-CUE-Kit NTV-KIT457 Overview The MY-CUE Kit allows the user to add up to 3 audio/video inputs
More informationIOB-RVC NTV-KIT798. Overview
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com IOB-RVC NTV-KIT798 Overview The IOB-RVC interfaces a single backup camera input to the factory
More informationWVIMB-06. Now Streams YouTube Videos from ios Devices!
Vehicle Applications Now Streams YouTube Videos from ios Devices! MERCEDES BENZ 201-201 B-class (W246) 2012-201 C-class (W204) 2012-201 C-class (C204) 2012-201 E-class (W212) 2012-2014 E-class (C207) 2012-201
More informationCar-Solutions.com
Specification Car Compatibility : New S-Class(W222), New C-Class(W205) New CLA Class, New GLE Class Components : Interface* 1ea, Sub-board*1ea Multimedia interface Input/output spec Input : HDMI*2, Analog
More informationAX-AM-MB91. Mercedes Benz (NTG 4.5 with 5.8 & 7 display) HDMI and Camera Interface 2011-up*
AX-AM-MB91 INSTALLATION INSTRUCTIONS Mercedes Benz (NTG 4.5 with 5.8 & 7 display) HDMI and Camera Interface 2011-up* *Visit AxxessInterfaces.com for up-to-date vehicle specific applications. INTERFACE
More informationW204-H NTV-KIT794. Overview
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com W204-H NTV-KIT794 Overview The W204-H RVC Kit interfaces two camera inputs and optional HDMI
More informationCar-Solutions.com
Warning / Caution Warning Caution When installing the main unit, do not remove or alter existing vehicle fasteners, including nuts, bolts, screw, clips, and fittings. Never detach, move or alter existing
More informationVideo Interface for Nissan Juke. Car Solutions. User Manual
Video Interface for Nissan Juke User Manual 1. Before installation 1.1 Specification 3 1.2 Features 4 1.3 System diagram 5 1.4 Components 6 1.5 Exterior 7 2. User interface 2.1 Dip switch 8 2.2 Keypad
More informationAUDI-09 EXT MMi NTV-KIT187
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com AUDI-09 EXT MMi NTV-KIT187 Overview The AUDI-09 EXT MMi Kit allows the user to add up to 3 video
More informationAX-AM-MB92. Mercedes Benz (NTG 5.0 with 7 or 8 display) HDMI and Camera Interface 2014-up*
AX-AM-MB92 INSTALLATION INSTRUCTIONS INTERFACE COMPONENTS AX-AM-MB92 interface AX-AM-MB92 harness 6-pin to 4-pin LVDS (video) cable LVDS extension cable 10-pin harness with RCA jacks 3.5mm extension cable
More informationJaguar F-TYPE CAM 16. Dual Camera interface for select 16+ Jaguar vehicles NTV-KIT746 BHM 05/31/16 NTV-DOC259
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 Jaguar F-TYPE CAM 16 Dual Camera interface for select 16+ Jaguar vehicles NTV-KIT746 BHM Overview Jaguar F-TYPE CAM 16 interfaces
More informationIOB-RVC NTV-KIT798. Overview
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com IOB-RVC NTV-KIT798 Overview The IOB-RVC interfaces a single backup camera input to the factory
More informationCoastal Electronic Technologies, Inc. GM LOCKPICK GMX-320 Installation and Operation Instructions
Coastal Electronic Technologies, Inc. GM LOCKPICK GMX-320 Installation and Operation Instructions Thank you for your purchase of the Coastal Electronic Technologies, Inc. GM LOCKPICK GMX- 320. The GMX-320
More informationAUDI DYNAMIC-EXT NTV-KIT701
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com AUDI DYNAMIC-EXT NTV-KIT701 Overview The AUDI-DYN EXT Kit interfaces a backup camera (with dynamic
More informationv.logic Intelligent Solution Interface CI-V4-NTG45
v.logic Intelligent Solution Interface Compatible with Mercedes Benz vehicles with COMAND Online NTG4.5 navigation and Audio20 NTG45 system with 4pin HSD LVDS connector Page Product features Plug and play
More informationRL2-MMI3G-Q3 RL2-MMI3G-GW. For Audi MMI3G basic/high, MMI3G+ basic/high and VW RNS850 navigation systems with 4pin HSD LVDS connector
r.link Video-inserter RL2-MMI3G-Q3 RL2-MMI3G-GW For Audi MMI3G basic/high, MMI3G+ basic/high and VW RNS850 navigation systems with 4pin HSD LVDS connector Video-inserter for front- and rear-view camera
More informationINSTALLATION INSTRUCTIONS
GM camera interface for vehicles with a factory Rear Entertainment System (RES) (Kit # 9002-2764) Please read thoroughly before starting installation and check that kit contents are complete. Items Included
More informationVL2-MBN4. for Mercedes Benz vehicles generations NTG3, NTG4 with Comand APS, Audio50 APS or Audio 20 with 10pin HSD LVDS connector on the monitor
v.link Video-inserter for Mercedes Benz vehicles generations NTG3, NTG4 with Comand APS, Audio50 APS or Audio 20 with 10pin HSD LVDS connector on the monitor Video-inserter with 2 video + RGB + rear-view
More informationv.logic Intelligent Solution Interface V4-CCC
v.logic Intelligent Solution Interface For the E-series BMW and Mini with navigation system or radio and 6.5 or 8.8 monitor with 10pin BMW LVDS connector Product features Plug and play media-controller
More informationUser Manual ANDROID CAR SOLUTION supp How To Use A-LINK Launcher 0. Main Screen 4 5 6 Status alert bar. Quick navigation bar. - (Recent App) : User can see running applications and manage them. - (Home
More informationPRE-INSTALL QUESTIONS
PRE-INSTALL QUESTIONS Is it really Plug and Play? Yes. The Navos comes with all the necessary plugs and harnesses to connect directly to your car; no extra adapters or dash trim kits required. Is the Navos
More informationNOTICE OF INTENDED INSTALLATION AND USE
NOTICE OF INTENDED INSTALLATION AND USE THE ROSEN MULTI-MEDIA NAVIGATION SYSTEMS CONTAIN AN INTERNAL VIDEO PLAYER, WHICH IS NOT INTENDED FOR VIEWING BY THE DRIVER. THE VIDEO PLAYER IS DISABLED WHEN THE
More informationNNG Toyota 3/3s Navigation System for select Toyota NTV-KIT553/598
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL: 561-955-9770 FAX: NNG Toyota 3/3s Navigation System for select Toyota NTV-KIT553/598 NNG-Toyota 3/3s Kit Content 1 4 9 5 6 2 3 8 1. 2. 3. 4. 5. 6. 7. 8.
More informationPRECAUTIONS: Please read before you start the installation
Installation manual for DVI HA HDD with HA HDD harness In the box: DVI HA HDD video interface HA HDD plug and play wiring harness Installation manual IMPORTANT: Please read all precautions first. This
More informationNNG-GM2 Navigation interface for GM vehicles equipped with LVDS MYLink/CUE NTV-KIT552
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 NNG-GM2 Navigation interface for GM vehicles equipped with LVDS MYLink/CUE NTV-KIT552 1. GM2 LVDS Interface/GPS combo 2. Plug
More informationW205-RVC NTV-KIT580. Overview
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com W205-RVC NTV-KIT580 Overview The W205-RVC Kit allows the user to add a backup camera input (with
More informationVL2-NG4. for Citroen and Peugeot with navigation NG4 with colour display and 10pin LVDS monitor connector
v.link Video-inserter for Citroen and Peugeot with navigation NG4 with colour display and 10pin LVDS monitor connector Video-inserter with 2 video + RGB + rear-view camera input and CAN control Product
More informationACPAD-81Z Smartphone Connectivity Interface for AUDI Vehicles with Concert / Symphony Non MMI Radios
INTEFACING SOLUTIONS PODUCT FEATUES: - The has a built in Dual-Link module that allows connection of Android and other devices with two-way mirroring control. - Control Apps using smartphone s voice control
More informationInstruction Manual. High-Definition Link for Mercedes-Benz IW-NTG55-N23 LVDS IN/OUT IR IN/OUT DIP SWITCH. Latest Firmware Date
Instruction Manual High-Definition Link for Mercedes-Benz AV IN/OUT HDMI IN Model Name IW-NTG55-N23 LVDS IN/OUT IR IN/OUT 5V USB POWER DIP SWITCH IW-NTG55-N23 Latest Firmware Date 2018 03 28 Manual Version
More informationBMW / Mini. X SERIES Up X1 Sports Vehicle X5 Sports Activity Vehicle X6 Sports Activity Coupe
BMW / Mini 1 SERIES 2007-2011 1 Series 3-door hatchback 2007-2013 1 Series 2-door Coupe (1M) 2004-2012 1 Series (5-door) 2008 - Up 1 Series Convertible 3 SERIES 2005-2011 3 Series Sedan 2005-2011 3 Series
More informationAUDI DYNAMIC-A3 NTV-KIT702
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com AUDI DYNAMIC-A3 NTV-KIT702 Overview The AUDI DYNAMIC-A3 Kit interfaces a backup camera input
More informationModel: CAM430MV Wired Multi-View Camera with License Plate / Rear Surface Mount Installation Manual Features
Model: CAM430MV Wired Multi-View Camera with License Plate / Rear Surface Mount Installation Manual Features Fully Adjustable, Multiple Viewing Angle Smart Camera. High Resolution, 1/2 CMOS Color Camera
More informationBMW-EVO KIT NTV-KIT804
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com BMW-EVO KIT NTV-KIT804 Screen Connector Overview The BMW-EVO kit interfaces 2 video inputs (including
More informationNNG-Ford V1 NTV-KIT558. Navigation interface for FORD vehicles equipped with 8.4 MyTouch NTV-DOC218
3950 NW 120th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 NNG-Ford V1 Navigation interface for FORD vehicles equipped with 8.4 MyTouch NTV-KIT558 NTV-DOC218 SoftTouch Navigation System
More informationADDITIONAL CAM POWER REVERSE CAM POWER BLUETOOTH MUTE AUDIO + IN AUDIO - IN 12V ACC OUTPUT 12V CONSTANT GROUND
UNPLUG ORIGINAL RADIO CONNECTORS THEN PLUG IN HERE PLUG AND PLAY NO OTHER CONNECTIONS ARE NECESSARY USE HANDSFREE KIT MICROPHONE IPOD/IPHONE/ITOUCH/IPAD CONNECTION USB INPUT ADD YOUR BLUETOOTH HANDSFREE
More informationCar Stereo Receiver and Audio Player
Car Stereo Receiver and Audio Player USER MANUAL AND INSTALLATION INSTRUCTIONS Sondpex Corporation of America Model: MRDP-C01 Thanks for your purchase! Our car audio equipment lets you enjoy diversified
More informationPart Number: Lt. Taupe / Stone / Ivory Touring Edition Accessory Code: EH3
Part Number: Lt. Taupe - 00016-00710 / Stone - 00016-00720 / Ivory - 00016-00730 Touring Edition - 00016-00745 Accessory Code: EH3 Kit Contents Item # Quantity Reqd. Description 1 2 Headrest Assembly 2
More informationTJ to 2006 Jeep Wrangler Installation Tips V1.0
TJ1002 2003 to 2006 Jeep Wrangler Installation Tips V1.0 Table of Contents I. Introduction II. Safety precautions III. Opening the dash IV. Removing the stock radio V. Installing the TJ1002 VI. Backup
More informationInstruction Manual. High-Definition Link for VOLVO. A-LINK For V-sensus SD SLOT HDMI IN POWER RESET DIP SWITCH USB 1 USB 2 5V USB.
Release Date: 2018 07-15 Instruction Manual High-Definition Link for VOLVO A-LINK For V-sensus 5V USB SD SLOT HDMI IN POWER RESET DIP SWITCH USB 1 USB 2 FOR V-sensus POWER/CAN DEBUG KEYPAD LVDS OUT LVDS
More informationG BT 2.4 TFT DISPLAY DAB/DAB+ RADIO CAR ADAPTER WITH FM TRANSMITTER & BLUETOOTH MUSIC STREAMING
G4-234BT 2.4 TFT DISPLAY DAB/DAB+ RADIO CAR ADAPTER WITH FM TRANSMITTER & BLUETOOTH MUSIC STREAMING G4-2 3 4BT IMPORTANT: Please read the manual carefully before using the product and keep it for future
More informationRL2-MMI3G-Q3 RL2-MMI3G-GW. Compatible with Audi MMI3G basic/high, MMI3G+ basic/high and VW RNS850 navigation systems with 4pin HSD LVDS connector
r.link Video-inserter RL2-MMI3G-Q3 RL2-MMI3G-GW Compatible with Audi MMI3G basic/high, MMI3G+ basic/high and VW RNS850 navigation systems with 4pin HSD LVDS connector Video-inserter for front- and rear-view
More informationTM C8 LOCKPICK PRO STEERING WHEEL CONTROLS * OPERATIONS WHILE MENUS ARE DISPLAYED ON INSTRUMENT CLUSTER CONTROLS ON BACK OF STEERING WHEEL BACK
TM C8 LOCKPICK PRO STEERG WHEEL CONTROLS SCROLL UP MENUS SELECT DESIRED FEATURE * OPERATIONS WHILE MENUS ARE DISPLAYED ON STRUMENT CLUSTER CONTROLS ON BACK OF STEERG WHEEL SCROLL DOWN MENUS TOGGLE TO REAR
More informationCI-C1-NTG25. for Mercedes Benz Comand APS NTG2.5 navigation systems
c.logic lite-interface for Mercedes Benz Comand APS NTG2.5 navigation systems Product features full plug and play multimedia interface 1 AV-input with separate IR-control channel control of after-market
More informationREAR-VIEW CAMERA & AV INPUT INTEGRATION INTERFACE FOR DODGE & JEEP VEHICLES 2014-UP
DODGE 2014-2015 Durango 2014-2015 RAM* JEEP 2014-2015 Grand Cherokee APPLICATION NOTES: FOR UCONNECT 5 AND 8.4 DISPLAYS *NOTE: Not compatible with diesel powered trucks. PARTS INCLUDED (2) CH-75V CAN Interface
More informationQUICK START GUIDE MERCEDES-BENZ (NTG4.5/NTG5)
Multimedia interface for original entertainment system QUICK START GUIDE MERCEDES-BENZ (NTG4.5/NTG5) Installation 1. Operation 1.1 Features---------------------------------------------------------------3
More informationNOTICE OF INTENDED INSTALLATION AND USE
* JBL Audio equipped vehicles will require additional part # DP-TYJBL1 audio interface. NOTICE OF INTENDED INSTALLATION AND USE THE ROSEN MULTI-MEDIA NAVIGATION SYSTEMS CONTAIN AN INTERNAL VIDEO PLAYER,
More informationGM-K PRG. Dual Camera interface for 15 Chevy Sonic/Spark/Trax NTV-KIT626 BHM 10/15/15 NTV-DOC235
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 GM-K PRG Dual Camera interface for 15 Chevy Sonic/Spark/Trax NTV-KIT626 BHM Overview The GM-K PRG interfaces a reverse and
More informationInterface Module for radio Auxiliary Input. Installation & Operation
Interface Module for radio Auxiliary Input Installation & Operation Serial Number: Date of Purchase: Contents Introduction and Precautions... 2 Supported ipod Models... 3 Installation...3-4 Operation...
More informationInstruction Manual High-Definition Link for EVO ID5,ID6 With OEM Touch IW-EVO6-N23
Release Date: 09 0-07 Instruction Manual High-Definition Link for EVO ID5,ID6 With OEM Touch Model Name Latest Firmware Date 09-0 - 3 Manual Version Rev..8 Language English Contents Precautions Car Compatibility
More informationFHD Driving Recorder E272S/S272W. Quick Start Guide
FHD Driving Recorder E272S/S272W Quick Start Guide 400-8401-030 www.polaroidcarcam.com 1 Introduction 1.1 Package Contents The package contains the following items. In case there is any missing or damaged
More informationVL2-MBN45. for Mercedes Benz vehicles generation NTG with Comand Online, Audio50 APS or Audio 20 with 4pin HSD LVDS connector on the monitor
v.link Video-inserter for Mercedes Benz vehicles generation NTG4.5-204 with Comand Online, Audio50 APS or Audio 20 with 4pin HSD LVDS connector on the monitor Video-inserter with 2 video + RGB + rear-view
More informationCar-Solutions.com
Specification Car Compatibility : 2017 Infinity Q30 Components : Interface* 1ea, Sub-board*1ea Multimedia interface Input/output spec Input : HDMI*2, Analog RGB*1, A/V*1, CVBS(Rear view Camera)*1, CVBS(Front
More informationCarNavi-Tech. Your best partner for better driving
Your best partner for better driving SUNE TECHNOLOGY CO.,LTD No.9,Lane 606,Anping Rd,Tainan City 70849,TAIWAN TEL:+88662292246 FAX:+88662288104 Http://www.sune-tech.com Shop http://www.carnavi-tech.com
More informationUSB-NTG1. compatible with Mercedes Benz Comand APS NTG1 navigation systems
usblogic USB-AV-Player compatible with Mercedes Benz Comand APS NTG1 navigation systems Product features USB-port for media up to 2 TB (2000GB) supports FAT32 and NTFS formatted media multi partition capable
More informationCar-solutions.com
Warning / Precautions! Do not modify, dismantle or unintended operation this system outside Q-roi After Sales. Damage occurred by unintended operation may Warning cause Q-roi After Sales service void.
More informationDVB-NTG1. Compatible with Mercedes Benz Comand APS NTG1 navigation systems
dvblogic DVB-T Tuner Compatible with Mercedes Benz Comand APS NTG1 navigation systems Product features full plug and play vehicle-specific dual DVB-T Tuner with two active DVB-T glass-mount antennas integrated
More informationerald Int ons BMW09 Specification & Installation Model: PIP-BM09-N3-V2
BMW09 erald Int ons Model: PIP-BM09-N3-V2 Specification & Installation -PIP BMW 09 Feature -Clear quality view -NTSC, PAL Auto detection -AV source switching thru genuine button in vehicle. -Convenient
More informationSIR-PCM3 955/997 SIRIUS Satellite Radio interface for Porsche PCM 3 radios NTV-KIT266/285
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 SIR-PCM3 955/997 SIRIUS Satellite Radio interface for Porsche PCM 3 radios NTV-KIT266/285 BHM Overview The SIR-PCM3 adds Sirius
More informationBMW-EVO ID6 NTV-KIT837
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com BMW-EVO ID6 NTV-KIT837 Screen Connector Overview The BMW-EVO ID6 kit interfaces 2 video inputs
More informationGM2 FIM LOCKPICK INSTALLATION OPTIONS COPYRIGHT 2012 COASTAL ELECTRONIC TECHNOLOGIES, INC.
UNPLUG ORIGINAL RADIO CONNECTORS THEN PLUG IN HERE PLUG AND PLAY NO OTHER CONNECTIONS ARE NECESSARY FOR OVERRIDE FEATURES CONNECT USB CABLE HERE FOR FUTURE UPDATES OPTIONAL POWER OUTPUTS FOR CAMERA(S)
More informationNNG-Toyota 6. Navigation interface for Toyota Sienna NTV-KIT625 BHM 11/02/15 NTV-DOC237
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 NNG-Toyota 6 Navigation interface for 15-16 Toyota Sienna NTV-KIT625 BHM 11/02/15 NTV-DOC237 Toyota 6 navigation system application
More informationUCIT LIVE HD 4 Camera DVR. Installation Manual. 10/17 Version 2.0
UCIT LIVE HD 4 Camera DVR Installation Manual 10/17 Version 2.0 This is a step by step guide that will walk you through installing the UCIT LIVE HD 4 Channel Camera System. Basic wiring experience and
More informationPCM4-CAM NTV-KIT750. Overview
3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com PCM4-CAM NTV-KIT750 Overview The PCM4-CAM Kit interfaces a backup camera input (with active
More informationC2-NTG25. Compatible with Mercedes Benz Comand APS NTG2.5 navigation systems
c.logic-interface Compatible with Mercedes Benz Comand APS NTG2.5 navigation systems Product features full plug and play multimedia interface 2 AV-inputs with separate IR-control channel control of after-market
More informationINSTRUCTIONS Please read all instructions carefully before using
INSTRUCTIONS Please read all instructions carefully before using CONTENTS 1.Basic Operation Panel Introduction 02 Remote control function 04 Turn the Unit On/Off 06 Access main interface 06 U Disc/SD Card
More informationINSTALLATION INSTRUCTIONS
GM MyLink Dual Video Input Interface for Factory Display Radios (Kit # 9002-2785v2) Please read thoroughly before starting installation and check that kit contents are complete. Items Included in the Kit:
More informationGEN 6 LOCKPICK INSTALLATION OPTIONS COPYRIGHT 2010 COASTAL ELECTRONIC TECHNOLOGIES, INC.
AFTERMARKET FRONT/BABY CAMERA VIDEO CONNECT HERE FRONT/BABY CAM POWER TO LOCKPICK RED W/BLACK STRIPE WIRE TO LOCKPICK BLACK GROUND WIRE UNPLUG ORIGINAL RADIO CONNECTORS THEN PLUG IN HERE PLUG AND PLAY
More informationCI-C1-CCC CI-C1-CIC/CI-C1-CXC-TV1 CI-C1-E65/CI-C1-E65-TV. Compatible with BMW Professional navigation systems with idrive and 6.5 /8.
c.logic lite interfaces CI-C1-CCC CI-C1-CIC/ CI-C1-E65/CI-C1-E65-TV Compatible with BMW Professional navigation systems with idrive and 6.5 /8.8 monitor Interface-set AV and reverse camera input with device
More informationC1-C20. Compatible with navigation systems Mercedes Benz Comand 2.0 Comand APS CD
c.logic lite-interface Compatible with navigation systems Mercedes Benz Comand 2.0 Comand APS CD Product features full plug and play multimedia interface 1 AV-input with separate IR-control channel control
More informationPRECAUTIONS. How to Handle Discs. Lithium Battery Cell Warnings
CONTENTS Precautions... 1 How to Handle Discs... 1 Lithium Battery Cell Warnings... 1 Installation... 2 Prepare Radio... 2 Mount Radio... 2 Wiring Connections... 3 Uninstall the Main Unit... 4 Control
More informationWWW.ADAPTIV-MULTIMEDIA.COM 1 CONTENTS Contents About 3 Connection Diagram 4-5 Quick Start Guide 6-7 System 8-9 Sound Settings 10 Navigation 11 DAB 12-13 Video - HDMI 14 Video - DVBT 15-16 Video - AV In
More information