Room controller STRA-17
|
|
- Zoe Greene
- 5 years ago
- Views:
Transcription
1 Room controller STRA-17 Application example Room 2 Room 3 Room 4 SCADA EXOline alt. RS485 Modbus Transformer STRZ-24 (Required component) STRA-17 is a preprogrammed room controller intended to control heating and cooling in after-treatment systems. It is preprogrammed with communication and is intended for use in premises where high comfort and low energy consumption is aimed, e.g. offices, schools, shopping centres, airports, hotels, hospitals and so on. Room controller description Communication via RS485 (Modbus, BACnet or EXOline) to operate as a stand-alone control or to be connected to a central system. Easy installation thanks to separate basic plate for cable connections. Display 5 different operating modes On/Off or V control Input for occupancy detector, window contact, condensation detector, CO 2 and change-over function Internal temperature External temperature STRZ-05 Occupancy detector STRZ-09 Changeover STRZ-15 Optional accessories Condensation detector STRZ-16 Window contact STRZ-38 STRA-17 can control up to 16 STRZ-70 thermal actuators, devided into heating and cooling output Note that an adapter might be necessary if a thermal actuator other than STRZ-70 is used. The number is dependant on the initial electrical consumption of the valve actuator. If another thermal actuator than STRZ-70 is used, contact Fläkt Woods. Functions Cooling and heating (water coil or electrical heater) EC fan control Setpoint buttons CO 2 control Occupancy (forced ventilation) Change-over Fläkt Woods 9385 GB Specifications are subject of alteration without further notice.
2 Room controller STRA-17 Controller modes STRA-17 can be configured for different controller modes/ control sequences: Heating Heating/Heating Heating/Cooling via change-over Heating/Cooling Heating/Cooling with VAV-control and forced supply air function Heating/Cooling with VAV-control Cooling Cooling/Cooling Heating/Cooling with change-over for cooling The controller is factory set to Heating/cooling. Choosing another sequence is easily done in the parameter menu in the display. Information on how to access the parameter menu and configure the controller, consult either the technical manual or the installation and maintenance folder. Operating modes There are five different operating modes: Off, Unoccupied, Stand-by, Occupied and Bypass. Occupied is the preset operating mode. It can be changed to Standby in the parameter menu in the display. The operating modes can be activated via a central command, an occupancy detector or the Occupancy button. Off: Heating and cooling are disconnected. However, the temperature must not drop below the set minimum temperature (Factory setting (FS)=8 C). Operating mode Off is activated on open window. Unoccupied: : The room where the controller is placed is not used for an extended period, for example during holidays or long weekends. Both heating and cooling are disconnected within a temperature interval with configurable min/max temperatures (FS min=15 C, max=30 C). Stand-by: The room is in an energy save mode and is not used at the moment. This can for example be during nights, weekends, evenings etc. The controller is prepared to change operating mode to Occupied if someone enters the room. Both heating and cooling are disconnected within a temperature interval around the applicable setpoint (FS heating setpoint value=-3 C, cooling setpoint=+3 C). Occupied: The room is in use and is therefore in a comfort mode. The controller regulates the temperature around a heating setpoint (FS=22 C) and a cooling setpoint (FS=24 C). Bypass: The temperature in the room is controlled in the same way as in operating mode Occupied. The output for forced ventilation is also active. Bypass is useful for example in conference rooms, where many people are present at the same time for a certain period of time. When Bypass has been activated by a press on the Occupancy button, the controller will automatically return to the preset operating mode (Occupied or Stand-by) after a configurable time (FS=2 hours). If an occupancy detector is used, the controller will automatically return to the preset operating mode after 10 minutes absence. Functions description Occupancy detector By connecting an occupancy detector, RC-C3DFOC can switch between Bypass and the preset operating mode (Occupied or Stand-by). The temperature is then controlled according to requirement, which saves energy and keeps the temperature at a comfortable level. EC fan control EC fan control is always activated in the STRA-17. The function can be activated in the control modes Heating, Heating/ Cooling via change-over, Heating/Cooling, Cooling and Cooling/Cooling. Control of electrical heater The function for a heating battery works in sequence with the change-over. The change-over function will then be used to switch between Summer and winter mode. In Summer mode, the STRA-17 will function as a Heating/ Cooling controller while, in winter mode, it will function as a Heating/Heating controller. The electrical heating battery will start only if the water heating battery cannot meet the heating demand. It is important to note that the STRA-17 doesn t have inputs for fan running status and heater overheat. These functions must instead be provided by a supervisory system. Fläkt Woods 9385 GB Specifications are subject of alteration without further notice.
3 Room controller STRA-17 Change-over function The STRA-17 has an input for change-over to operate with heating or cooling function. The input can be connected to s of type PT1000 and have the mounted so that it senses the temperature on the supply pipe to the coil. As long as the heating valve is more than 20 % open, or every time a valve exercise is performed, the difference between the media and room temperature will be calculated. The control mode will change depending on the temperature difference. As an alternative, a potential-free contact can be used. When the contact is open, the controller works with the heating function and, when it is closed, with the cooling function. Fan control RC-C3DFOC has a fan button. The speed is set with the fan button. When the fan button is pressed, the fan speed will step from the current speed to the next. The controller has the following positions: Auto Automatic control of the fan speed to maintain desired room temperature 0 Fan off I Manual position with low speed II Manual position with medium speed III Manual position with high speed. CO 2 control In control modes where VAV (Variable Air Volume) is chosen, dampers outputs are affected by the CO 2 level. On increasing CO 2 level the damper opens to increase the quantity of air, regardless of the temperature requirements of the controller. The damper starts opening when the CO 2 level exceeds CO 2 level for starting opening damper, and is fully opened at CO 2 level for fully opened damper. In operating modes Off and Unoccupied, the fan is stopped, regardless of the setting in the display. Dimensions Fläkt Woods 9385 GB Specifications are subject of alteration without further notice.
4 Description room controller STRA-17 Technical data Supply voltage Internal consumption Ambient temperature Storage temperature Ambient humidity Protection class Communication Modbus BACnet Communication speed Display Built-in temperature Material Weight Colour V AC, Hz 2.5 VA 0-50 C C Max 90% RH IP20 RS485 (EXOline or Modbus with automatic detection/change-over, or BACnet) MS/TP slave and master 8 bits, 1 or 2 stop bits. Odd, even (FS) or no parity. 9600, 19200, bps (EXOline Modbus and BACnet) or bps (BACnet only) LCD with background illumination NTC type, measuring range 0-50 C, accuracy +/-0.5 C at C casing Polycarbonate, PC 110 g Cover: Polar white RAL9010 Bottom plate: Light gray This product conforms to the requirements of the EMC Directive 2004/108/EC through product standards EN and EN RoHS This product conforms to the Directive 2011/65/EU of the European Parliament and of the Council. Inputs External room Change-over alt. potential-free contact Occupancy detector Condensation detector alt. window contact. PT1000-, 0 50 C. Suitable s is Fläkt Woods STRZ-05 PT1000-, C. Suitable is Fläkt Woods STRZ-15 Closing potential-free contact. Suitable detector is Fläkt Woods STRZ-09 Fläkt Woods condensation detector STRZ-16 alt. Window contact STRZ-38 resp. potential-free contact Outputs Valve actuator, alt. thermal actuator or On/Off actuator (UO1, UO2) Valve actuator Thermal actuator Valve actuator Thermal actuator On/Off actuator Damper actuators (UO3) EC fan Control Actuator exercise Terminal blocks 2 outputs 0 10 V, max 5 ma 2 outputs 24 V AC, max 2.0 A (time-proportional pulse output signal) 24 V AC, max 2.0 A 24 V AC, Max. 2.0 A Control Heating, cooling or VAV (damper) 1 output V DC EC fan S = 23 hours interval Lift type for cable cross-section 2.1 mm2 Setpoint settings via Regio tool or in the display Basic heating setpoint Basic cooling setpoint Setpoint displacement C C ± C (FS = ±3 C) Fläkt Woods 9385 GB Specifications are subject of alteration without further notice.
5 Valve and actuator STRZ-70 Actuator Technical data: - AC - AC/DC - For direct mounting with union nut (no tools required) - Two-wire connection - Position indication - Positioning time - Stroke - Degree of protection - Operation - Mounting position - Operation effect - Positioning force 230 V operating voltage, 2-position control signal AC/DC 24 V operating voltage, 2 position control signal or PDM 180 s 2.5 mm +/- 45 IP43, IP C Upright to horizontal 2.5W 100 N Valve Description, valve Type Δp max Lift height Thread Dn Kv STRZ-70-01/ kpa 2,5 mm Rp/R ½" m 3 /h STRZ kpa 2,5 mm Rp/R 3/4" m 3 /h STRZ kpa 2,5 mm Rp/R 1" m 3 /h Dimensions (mm) Thread ( ") Type DN A B C D E Rp R G Weight STRZ-70-01/ ,5 24,5 35 ½ ½ 3/4 0,28 STRZ ,5 24,5 35 3/4 3/4 1 0,33 STRZ ,5 24, ,42 KVS values Position Valve stroke [mm] STRZ-70-01/ STRZ STRZ Flow tolerance [+-%] Fläkt Woods 9385 GB Specifications are subject of alteration without further notice.
6 Valve sizing chart STRZ-70 q, m 3 /h (2) Dp q, kpa Dp q, bar Dp q, bar q, l/h Fläkt Woods 9385 GB Specifications are subject of alteration without further notice.
7 Accessories STRA-17 can be equipped with the following accessories, independent of application External temperature STRZ-05 Occupancy detector STRZ-09 Relay box (Required component) STRZ-14 Change-over STRZ-15 Condensation detector STRZ-16 Transformer STRZ-24 Input/output voltage 230/24 V Power VA 48 Protection PTC-protection WxDxH 77x123x70 Degree of protection IP44 Weight kg 1.2 Window contact STRZ-38 Fläkt Woods 9385 GB Specifications are subject of alteration without further notice.
8 Product code Room controller Room Controller (aa) 17 = STRA-17 (EC fan control, Fan speed switch, Display, Occupancy button) External temperature 1 = Room temperature 2 = Outdoor temperature 3 = Clamp-on Occupancy detector 1 = Wall mounted 2 = Ceiling mounted CO 2 1 = Active 0-10 V Execution ) Execution ) 1 = for wall mounting 2 = for duct mounting Change-over 1 = Standard (Clamp-on ) STRA STRZ-05-b STRZ-09-b STRZ-18-b-c STRZ-15-1 Condensation STRZ = Detection Transformer (24VAC, 60 VA) 1 = Wall mounted (IP44) Window contact (Magnetic contact) 1 = External (White) STRZ-24-1 STRZ-38-1 Fläkt Woods 9385 GB Specifications are subject of alteration without further notice.
9 Product code Actuator and Valve Siemens STRZ-70-bb-cc-0-1 Valve (bb) 00 = Without 01 = DN-15 (kvs ) female ½" valve inlet 02 = DN-20 (kvs ) female 3/4" valve inlet 03 = DN-25 (kvs ) female 1" valve inlet 11 = DN-15 (kvs ) Compression ring valve inlet 21 = DN-15 (kvs ) push-on valve ring inlet Valve actuator (cc) 00 = Without 02 = 24 V NC cable 1m 03 = 24 V NO cable 1m 04 = 230 V NC cable 1m 05 = 230 V NO cable 1m Adapter Siemens actuator Type of adapter 0 = Special 53 = Danfoss RA-N (RA2000) 54 = Danfoss RAVL 55 = Danfoss RAV 60 = TA-RVT 61 = Markaryd STRZ-71-1-cc Fläkt Woods 9385 GB Specifications are subject of alteration without further notice.
Pre-programmed room controller with display and communication
revision 01 2014 RC-C3DOC Pre-programmed room controller with display and communication RC-C3DOC is a complete pre-programmed room controller from the Regio Midi series intended to control heating, cooling
More informationRC-CDTO. Pre-programmed room controller with display, communication and three-point control
revision 02 2016 RC-CDTO Pre-programmed room controller with display, communication and three-point control RC-CDTO is a complete pre-programmed room controller from the Regio Midi series intended to control
More informationSTRA-17 Room controller. Installation and maintenance manual. Content
Content Installation preparations... Wiring diagram...3 Display handling...5 Technical data...6 Configuration...7 Operating modes...7 Controller modes...7 Activation operating modes...7 Control states...8
More informationPre-programmed room controller with display and communication
revision 10 2017 RC-C3DOC Pre-programmed room controller with display and communication RC-C3DOC is a complete pre-programmed room controller from the Regio Midi series intended to control heating, cooling
More informationRCF-230CAD. Room controller with communication for fancoil applications with two analogue V DC outputs
revision 04 2016 RCF-230CAD Room controller with communication for fancoil applications with two analogue 0...10 V DC outputs Intended to control heating and/or cooling in 2- or 4-pipe installations. Setpoint
More informationRCF-230CD. Communicating room thermostat for fan-coil applications with on/off outputs
revision 11 2013 RCF-230CD Communicating room thermostat for fan-coil applications with on/off outputs RCF-230CD intended to control heating and/or cooling in 2- or 4-pipe installations. Setpoint and fan
More informationRCF-230CAD. Communicating room controller for fan-coil applications with two analogue V DC outputs
revision 01 2015 RCF-230CAD Communicating room controller for fan-coil applications with two analogue 0...10 V DC outputs RCF-230CAD intended to control heating and/or cooling in 2- or 4-pipe installations.
More informationRCF-230CTD. Room controller for fan-coil applications with outputs for two thermal or one 3-position actuator or function for an electric heater
revision 03 2012 RCF-230CTD Room controller for fan-coil applications with outputs for two thermal or one 3-position actuator or function for an electric heater RCF-230CTD is a room controller intended
More informationRCF-230CTD. Built-in or external sensor The controller has a built-in sensor. Alternatively, the input for an external PT1000-sensor can be used.
revision 01 2015 RCF230CTD Communicating room controller for fancoil applications with outputs for two thermal or one 3position actuator or function for an electric heater RCF230CTD is intended to control
More informationEvolution TH. Pre-configured controller with display, clock and communication. Evolution. Applications. TH version. Sensors
Pre-configured controller with display, clock and communication Room controller for thermoregulation applications, equipped with rapid access buttons for the most common functions. Communication via RS485
More informationAIAS. Technical description
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains AIAS - and Efficient Heating Demand Products Controlled Tunnel Ventilation Fans 1 / 4 AIAS Technical description 2 / 9 AIAS -
More informationField selectable application type and room module series, via dip-switches on controller
TUC03 Plus Configurable Terminal Unit Controller Product bulletin The TUC03 Plus configurable Terminal Unit Controller is specifically designed to provide an improved BACnet integration. It allows the
More informationSuitable for a wide range of installations with wall-mount, flush-mount and hand-held remote control options.
TUC03 Configurable Terminal Unit Controller Product Bulletin The TUC03 Configurable Terminal Unit Controller is designed specifically to provide direct digital control of terminal unit applications with
More informationCONTENTS CONTROLLERS room controllers room units control units PRODUAL 3 CATALOGUE
Catalogue 207 CONTENTS CONTROLLERS... 4 room controllers... 5 room units... 29 control units... 24 PRODUAL 3 CATALOGUE T U R KU I C T C ON T R OL L E R S Multifunctional controllers for optimal performance
More informationFCU-4 FAN COIL CONTROLLER
FCU-4 FAN COIL CONTROLLER BACnet Enabled Description The FCU-4 is designed to provide complete control of fan coil units. The FCU-4 incorporates all the inputs and outputs to ensure that this advanced
More informationUC102 basic version with display and knob UC102BL version with display, knob and backlight UC102DK version without knob and display
UC102 Communicative heating controller Summary UC102 is a communicative room heating controller with two inputs and one PWM output for control of a radiator or electrical heater. It can work autonomously,
More informationWE TAKE BUILDING AUTOMATION PERSONALLY MANUAL RCF
WE TAKE BUILDING AUTOMATION PERSONALLY MANUAL RCF Copyright AB Regin, Sweden, 2016 DISCLAIMER The information in this manual has been carefully checked and is believed to be correct. Regin, however, makes
More informationHLS34 Modbus FCU/VAV Controllers installation instructions
HLS34 Modbus FCU/VAV Controllers installation instructions The HLS34 is specifically designed for individual room temperature and zone control applications. The controllers have built-in RS-485 channel
More informationTAC Xenta 101-VF. 3-Speed Fan Coil Controller. TAC Xenta
TAC Xenta TAC Xenta 101-VF 3-Speed Fan Coil Controller TAC Xenta 101-VF is a zone controller intended primarily for fan coil applications with the ability to control fans with multiple speeds, with one
More informationSemi Flush-mount Room Temperature Controllers with LCD
3 076 RDF300, RDF300.02, RDF340 RDF400.01 Semi Flush-mount Room Temperature Controllers with LCD for 2-pipe, 2-pipe with el. heater and 4-pipe fan coil units for use with compressors in DX type equipment
More informationControl system. Type FSL-CONTROL II. Modular, stand-alone room control system, specially for decentralised ventilation systems (with bus communication
X X testregistrierung Control system Type Central BMS interface DCP-FSL II-Stand-alone Pressure independent control valve Straight-way valve Modular, stand-alone room control system, specially for decentralised
More informationFCU-4 FAN COIL CONTROLLER
FCU-4 FAN COIL CONTROLLER BACnet Enabled Description The FCU-4 is designed to provide complete control of fan coil units. The FCU-4 incorporates all the inputs and outputs to ensure that this advanced
More informationEXOcompact. Third generation freely programmable controllers
revision 1 013 EXOcompact Third generation freely programmable controllers Small, compact controller with different types of communication, with or without built-in display. EXOcompact can be used either
More informationTC-8900 Controller Units with PM-8900 Power Modules
European Electronic Controls Catalogue Catalogue Section F Product Bulletin PM-8900 Issue date 06 2000 TC-8900 Controller Units with PM-8900 Power Modules Introduction TC-8900 is a family of analogue controllers,
More informationCommunicative controller for VAV systems
FCR015 Communicative controller for VAV systems Summary FCR015 is a communicative controller for heating and cooling panels and a VAV (variable air volume) damper. It measures temperature and CO 2 concentration
More informationRoom Temperature Controller
3 023 Room Temperature Controller for four-pipe fan coil units RCC30 Outputs for on / off valve actuators Outputs for three-speed fan Control depending on room or return air temperature Operating modes:
More informationRXB10.1. Room controller. Siemens Building Technologies Building Automation DESIGO RXB. for chilled ceilings and radiators with EIB bus communication
3 870 DESIO RXB Room controller for chilled ceilings and radiators with EIB bus communication RXB10.1 The RXB10.1 controller is used for temperature control in individual rooms: For chilled ceilings and
More informationOP10. Pre-programmed, configurable controller for simple applications
revision 10 2013 OP10 Pre-programmed, configurable controller for simple applications The Optigo OP10 range of controllers can be set to handle everything from temperature or humidity control to control
More informationRoom Temperature Controllers
3 021 Room Temperature Controllers for two-pipe fan coil units RCC10 Output for on / off valve actuator Outputs for three-speed fan Control depending on the room or return air temperature (RCC10) Automatic
More informationRoom Temperature Controller
3 023 Room Temperature Controller for four-pipe fan coil units RCC30 Outputs for on / off valve actuators Outputs for three-speed fan Control depending on room or return air temperature Operating modes:
More informationTemperature controller Ducted systems
2 725 Temperature controller Ducted systems Standard model without zoning functions RRV851 Multifunctional controller used for central control of ducted HVAC systems in combination with a QAX850 master
More informationTAC Xenta 121-FC Programmable Fan Coil Application
TAC Vista TAC Xenta 121-FC Programmable Fan Coil Application TAC Xenta 121-FC is an easily programmable controller intended for both 2-pipe and 4-pipe applications, with or without re-heat. It can be configured
More informationTemperature Controller (Heat Pumps)
3 347 Temperature Controller (Heat Pumps) For comfort control in HVAC & R systems Standalone electronic controller Programmable controller with preconfigured applications Three universal inputs for Ni1000,
More informationElectromotoric actuator
Acvatix Electromotoric actuator SUA21/3 For zone valves AC 230 V operating voltage, 2-position control signal Positioning force 170 N Direct mounting with M30 x 1.5 union nut (no tools required) 3-wire
More informationTechnote. Frese OPTIMA Compact actuators DN10-DN32. Application. Features thermic actuators. Features motoric actuators. Approval.
Page 1 of 6 Application Proportional 0-10V or 3-position modulating or On/ Off control of Frese OPTIMA Compact valves in heating, ventilating and air conditioning systems. The actuator can be mounted on
More informationElectrical actuators
4 893 SSA without auxiliary switch Electrical actuators SSA1 with auxiliary switch for radiator valves, MiniCombiValves (MCV) and small valves SSA31 SSA81 SSA61 Use SSA31 operating voltage AC 230 V 3-position
More informationActuator ABNM A5 LOG/LIN for AB-QM, 0-10 V Proportional
Actuator ABNM A5 LOG/LIN for AB-QM, 0-10 V Proportional Application Plug-in halogen free cable Simple snap-on installation IP54 in any installation position First-Open function (NC versions) Compact size,
More informationElectromotoric actuators
4 861 ACVATIX Electromotoric actuators for Combi-valve types VPI45.., DN15 32 SSD31.. SSD81.. SSD61.. SSD31.. operating voltage AC 230 V 3-position control signal SSD81.. operating voltage AC 24 V 3-position
More informationElectromotoric actuators
4 893 SSA.. without auxiliary switch ACVATIX Electromotoric actuators SSA.. with auxiliary switch For radiator valves, MiniCombiValves (MCV) and small valves SSA3.. SSA8.. SSA6.. Use SSA3.. operating voltage
More informationNon-communicating room controllers
3 882 DESIGO RXA Non-communicating room controllers RXA29.1 For fan-coil systems The RXA29.1 room controller are used for temperature control in individual rooms. For 2-pipe or 4-pipe fan-coil systems,
More informationFCU-MULTI Modbus Fan Coil Unit Controller
Product Sheet CT2.61 Controller Type FCU-MULTI FCU-MULTI Modbus Fan Coil Unit Controller FCU-MULTI is completely stand-alone operating room controller designed for room heating, cooling, ventilation, lighting
More information7-day room temperature controller
s 2 208 7-day room temperature controller Heating applications REV34.. Mains-independent, battery-operated room temperature controller featuring user-friendly operation, easy-to-read display and large
More informationUniversal Controller
3 342 Universal Controller For comfort control in HVAC & R-Systems Standalone electronic universal controller with P or PI response Operating voltage in accordance to type AC 24 V Control application selectable
More informationSE8300 Room Controller
SE8300 Room Controller Low Voltage Fan Coil Controller and Zone Controller Application Specific low voltage Room Controller with customizable covers and screen colors. Suitable for commercial and high
More informationElectromotoric actuators
4 893 SSA.. without auxiliary switch ACVATIX Electromotoric actuators SSA.. with auxiliary switch For radiator valves, MiniCombiValves (MCV) and small valves SSA3.. SSA8.. SSA6.. Use SSA3.. operating voltage
More informationElectrical Actuators
4 891 SSB without auxiliary switch SSB1 with auxiliary switch Electrical Actuators for small valves types VVP45, VXP45, VMP45 (max D25, k VS = 63 m 3 /h) SSB31 SSB81 SSB61 SSB31 operating voltage AC 230
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LR24A-MOD Communicative rotary actuator for ball valves orque motor 5 Nm Nominal voltage AC/DC 24 V Control modulating,, hybrid mode Conversion of sensor signals Communication via BACnet
More informationConstant & Variable air volume controllers
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Tunnel Fans Constant & Variable air volume controllers Air volume the smart way 2 Systemair Spread the secret
More informationBACnet Terminal Box (VAV) Controller
Technical Specification Sheet May 30, 2012 BACnet Terminal Box (VAV) Controller Figure 1. BACnet Terminal Box Controller. The BACnet Terminal Box Controller (Figure 1) provides high performance Direct
More informationSemi flush-mounted room temperature controllers with LCD
s 3 077 RDD310 RDE410 Semi flush-mounted room temperature controllers with LCD For heating systems RDD310 RDE410 RDD310 and RDE410 features: Operating voltage AC 230 V 2-position control with On / Off
More informationSemi flush-mounted room temperature controllers with LCD
s 3 077 RDD310 RDE410 Semi flush-mounted room temperature controllers with LCD For heating systems RDD310 RDE410 RDD310 and RDE410 features: Operating voltage AC 230 V 2-position control with On / Off
More informationECL Comfort V a.c. and 24 V a.c.
Data sheet ECL Comfort 200 230 V a.c. and 24 V a.c. Application The ECL Comfort 200 electronic controller is pre-programmed for a variety of different applications. Each application has its own card describing
More informationRXTP ROOM TEMPERATURE
ROOM TEMPERATURE CONTROLLER WITH PI CONTROL Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS 3 PRODUCT DESCRIPTION 4 ARTICLE CODES 4 INTENDED AREA OF USE 4 TECHNICAL DATA 4
More informationAutomation System TROVIS 5400 District Heating Controller TROVIS 5476
Automation System TROVIS 5400 District Heating Controller TROVIS 5476 On-off or three-step controller designed for wall or panel mounting (dimensions of front frame: 44 mm x 96 mm) Application Self-optimizing,
More informationBACnet Product Overview
BACnet Product Overview Comfort and energy-saving of a HVAC system are all about control. With networking devices, you can monitor and control your equipment via a communication system anywhere and anytime
More informationTM-2100 Series Room Command Module
TM-2100 Series Room Command Module Product Bulletin Code No. 21.144 E Issued 02 2011 The TM-2100 series of Room Command Modules are designed for use with the FCC series of DDC terminal unit controllers.
More informationTM-2100 Series Room Command Module
TM-2100 Series Room Command Module Product Bulletin Code No. 21.144 E Rev. B Issued 02 2007 The TM-2100 series of Room Command Modules are designed for use with the FCC series of DDC terminal unit controllers.
More informationRoom unit with PPS2 interface
1 626 Room unit with PPS2 interface for use with: controllers with a PPS2 interface QAA88.3 Room temperature measurement Key buttons for adjustment of the room temperature setpoint Key buttons for operating
More informationFree Energy Band RCC30U Room Temperature Controller for Four-pipe Fan Coil Unit
Document No. 155-324 Free Energy Band RCC30U Room Temperature Controller for Four-pipe Fan Coil Unit Description Features Application Product Number Room temperature controller for four-pipe fan coil units.
More informationElectrical actuator AME 855
Data sheet Electrical actuator AME 855 Description Actuator AME 855 can be controlled by electronic controllers with modulating or 3-point control output. Actuator can be used with VF3 valves (DN 200-300).
More informationElectrical Actuators
4 891 SSB without auxiliary switch Electrical Actuators for small valves types VVP45, VXP45, VMP45 (max D25, k VS = 63 m 3 /h) SSB1 with auxiliary switch SSB31 SSB61 SSB81 SSB31 operating voltage AC 230
More informationSiemens BACnet Programmable TEC Unit Conditioner (Fan Coil) Controller for Smoke Control
Technical Specification Sheet Document No. 149-844 August 12, 2011 Siemens BACnet Programmable TEC Unit Conditioner (Fan Coil) Controller for Smoke Control Returns from power failure without operator intervention.
More information7-day room temperature controller
s 2 205 7-day room temperature controller Heating or cooling applications REV24.. Mains-independent, battery-operated room temperature controller featuring user-friendly operation, easy-to-read display
More informationSE7600E Series Application Guide
SE7600E Series Application Guide Schneider Electric SE7600E Series RTU Controller with IAQ Control Application Guide CONTENTS Solution Overview 2 Product Overview 3 Features & Benefits 3 System Overview
More informationR7426A TEMPERATURE CONTROLLER WITHOUT REAL-TIME CLOCK. MicroniK 200. Order Numbers
MicroniK 200 Fig. 1. Temperature controller GENERAL The R7426A temperature controller covers all space, air or water flow temperature applications within the selectable control range of 0...50 C (LOw range)
More informationOutput Signal Active Note DC V. Electrical Data Power Supply DC V, ±10%, 1.4 W
Differential Pressure Sensor (Air) Differential pressure transmitter with 8 selectable ranges 0 to 5/10 V, 4 to 20 ma outputs and Modbus functionality. NEMA 4X / IP65 rated enclosure. For monitoring the
More informationSiemens BACnet Programmable TEC Constant Volume
Technical Specification Sheet Document No. 149-852 September 24, 2014 Siemens BACnet Programmable TEC Constant Volume Returns from power failure without operator intervention. No calibration required,
More informationTechnical data sheet
ZoneEase VAV Cloud VAV Controller set with Room Unit of Choice and Integrated pressure sensor, controller and damper actuator for pressure-independent temperature control VAV, Simple VAV and Demand Control
More informationViconics VT76x6W Water-source Heat Pump Controllers Engineering Guide Specification
Viconics VT76x6W Water-source Heat Pump Controllers Engineering Guide Specification General The VT76xxW series is designed for single-stage and multi-stage control of water source heat pumps with dedicated
More informationRWD68U Universal Controller
Document No. 155-738 RWD68U Universal Controller Description Features Product Number The Universal Controller is intended for heating, air conditioning, ventilation and refrigeration in comfort control
More informationSmartStruxure SmartStruxure Lite ZENO InnPoint. ZENOcontrols.com. compatible with
Room Controller Low Voltage Fan Coil Controller and Zone Controller Application specific controller with customizable covers and screen colours. The is a low voltage fan coil terminal equipment controller
More informationRS-485 Modbus RTU Networking Room Thermostats with LCD for Fan Coil Units
NT10 Series Issue Date February 21, 2016 RS-485 Modbus RTU Networking Room Thermostats with LCD for Fan Coil Units Features Ultra slim wall-mount unit to match any decor Supports standalone operation on
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet GM24A-MOD Communicative damper actuator for adjusting dampers in technical building installations orque motor 40 Nm Nominal voltage AC/DC 24 V Control modulating,, hybrid mode Conversion
More informationEYE 200: DDC single-room controller, ecos200
Product data sheet 94.200 EYE 200: DDC single-room controller, ecos200 How energy efficiency is improved Individual unitary control, fan coil units, chilled-beam control system, etc. Features Part of the
More informationMaster room unit for RRV controllers
2 722 Master room unit for RRV controllers 2 wire bus connection QAX850 Multifunctional, digital room unit for installer and end-user interface with RRV controllers. Use Use Application Room unit in combination
More informationTF243 Series Digital Thermostat Fan Coil Unit Control
TF243 Series Digital Thermostat Fan Coil Unit Control Features SPECIFICATION DATA General The TF243 series digital thermostat is designed for 3-speed fan and modulating valve control in a fan coil system,
More informationWeekday / weekend room temperature controller
s 2 203 Weekday / weekend room temperature controller Heating applications REV17.. Mains-independent, battery-operated room temperature controller featuring user-friendly operation, easy-to-read display
More informationElectrical Actuators
OEM Electrical Actuators for valves VVP459..., VXP459..., VMP459..., VXG48, VXI48, VVG549 SSC319 SSC819 SSC319 operating voltage AC 230 V 3-position control signal SSC819 operating voltage AC 24 V 3-position
More informationElectromotoric actuators
4 893 SSA.. without auxiliary switch ACVATIX Electromotoric actuators SSA..1 with auxiliary switch For radiator valves, MiniCombiValves (MCV) and small valves SSA31.. SSA81.. SSA61.. Use SSA31.. operating
More informationSE7600E Series Application Guide
Schneider Electric SE7600E Series RTU Controller with IAQ Control Application Guide CONTENTS Solution Overview 2 Product Overview 3 Features & Benefits 3 System Overview & Architecture 4 Models Available
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet SF24A-MOD Communicative spring-return actuator with emergency control function for adjusting dampers in technical building installations orque motor 20 Nm Nominal voltage AC/DC 24 V
More informationTemperature controller Multi-zone ducted systems
2 727 emperature controller ulti-zone ducted systems ulti-zone model with up to six zone outputs RRV856 ultifunctional controller used for central control of ducted HVAC systems in combination with QAX850
More informationRoom unit with PPS2 interface
s 1 640 1640P01 Desigo RX Room unit with PPS2 interface For use with: QAX34.3 Equipment from the RXC, RXB, RXL and RXA (PPS2) ranges Desigo PX automation stations 1) Devices with a PPS2 interface Measurement
More informationActuators AMV 655, 658 and 659 can be controlled by electronic controllers with 3-point output.
Data sheet Actuators for three point control without safety function SU, SD with safety function (spring up/down) SD with EN certified safety function (spring down) Description Actuators can be used in
More informationInstallation and Operation. Tracer MP501 Controller CNT-SVX08B-EN
Installation and Operation Tracer MP501 Controller CNT-SVX08B-EN Installation and Operation Tracer MP501 Controller CNT-SVX08B-EN April 2005 CNT-SVX08B-EN Tracer MP501 Controller Installation and Operation
More informationTechnical data sheets
echnical data sheets Ready-to-connect spring return actuator with emergency function for VAV and CAV units in ventilation and air conditioning systems in buildings For air dampers up to approx. 4 m 2 orque
More informationSER8300 Room Controller
SER8300 Room Controller Line Voltage Fan Coil Controller with SC3000 Relay Pack Application specific controller with customizable covers and screen colors. The SER8300 is a line-voltage fan coil room controller
More informationSiemens BACnet Programmable TEC Unit Conditioner Controller
Technical Specification Sheet Document No. 149-831 September 24, 2014 Siemens BACnet Programmable TEC Unit Conditioner Controller Returns from power failure without operator intervention. No calibration
More informationSiemens BACnet Programmable TEC VAV with Series Fan and 3-Stage Electric Heat Controller
Technical Specification Sheet Document No. 149-834 August 23, 2010 Siemens BACnet Programmable TEC VAV with Series Fan and 3-Stage Electric Heat Controller The Siemens BACnet PTEC VAV with Series Fan and
More informationDESIGO RX Individual room controllers. for fan-coil systems, chilled ceilings and radiators, with LONMARK-compatible bus communications
3 834 DESIO RX Individual room controllers for fan-coil systems, chilled ceilings and radiators, with MARK-compatible bus communications RXC20.1 RXC21.1 The RXC20.1 and RXC21.1 controllers are used for
More informationOverview of types. Technical data
echnical data sheet SH2A-MF.. Multifunctional linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air control
More informationTAC Xenta 121-HP Programmable Heat Pump Application
TAC Vista TAC Xenta 121-HP Programmable Heat Pump Application TAC Xenta 121-HP is an easily programmable controller intended for heat pumps, with or without re-heat. It can be configured for use with 1,
More informationSiemens BACnet Programmable TEC Unit Conditioner (Fan Coil) Controller
Technical Specification Sheet Document No. 149-831 August 12, 2011 Siemens BACnet Programmable TEC Unit Conditioner (Fan Coil) Controller No calibration required, thereby reducing maintenance costs. PID
More informationSiemens BACnet Programmable TEC Dual Duct Two Air Velocity Sensors Controller
Technical Specification Sheet Document No. 149-851 September 24, 2014 Siemens BACnet Programmable TEC Dual Duct Two Air Velocity Sensors Controller The Siemens BACnet PTEC Dual Duct Controller provides
More informationDatasheet RCUXXYY EAE KNX Room Control Unit RCUXXYY DT R1.0. General Description. EAE Technology Page 1/10
General Description Room Control Unit RCU Series are designed as an all in one product for different room layouts such as apartments, hotel rooms, hospitals and residences. Available versions of EAE RCU
More informationUCU Room Display. Operation Modes. Features. Applications DATASHEET
DATASHEET UCU Room Display The UCU Room Display provides dedicated visually appealing Room Control display for use with UCU10FC/K Unitary Controller. The display allows the user to view and adjust selected
More informationApplication program: description and examples
F a n C o i l U n i t C o n t r o l l e r F a n C o i l 4 9 5 5 1 Application program: description and examples Woertz AG Electrotechnical accessories, installation systems Hofackerstrasse 47, P.O. Box
More informationNon-communicating room controllers
3 881 DESIO RXA on-communicating room controllers For fan-coil systems RXA20.1 RXA21.1 RXA22.1 The RXA20.1, RXA21.1 and RXA22.1 room controllers are used for temperature control in individual rooms. For
More informationMeasure & Control Temperature & CO2 levels with analog & digital I/O
MADE IN OZ HTC-DIGITAL-LCD PROGRAMMABLE TEMPERATURE CONTROLLER c/w YEARLY PROGRAMMABLE TIME SWITCH COMPATIBLE WITH A WIDE RANGE OF SENSORS ROOM O/A WALL DUCT PIPE Use Features Measure & Control Temperature
More informationQXA2000 QXA2001. Condensation Monitor QXA2001 QXA2000 AQX2000
1 542 1542P03 1542P01 1542P02 QXA2001 QXA2000 AQX2000 Condensation Monitor QXA2000 QXA2001 The QXA2000 condensation monitor is used to avoid damage due to condensation on chilled ceilings and in HVAC plant.
More information