ZBRN1 access point- 2 RJ V AC/DC-4 displays-5 LEDs-Eth-Modbus-wireless radio

Transcription

1 Characteristics access point- 2 RJ V AC/DC-4 displays-5 LEDs-Eth-Modbus-wireless radio Product availability : Stock - Normally stocked in distribution facility Price* : USD Main Range of product Product or component type Device short name Product specific application Function of module Jun 13, 2018 Harmony Wireless access point Interface to PLC Monostable Communication port protocol Zigbee green power at 2.4 GHz conforming to IEEE Antenna type Transmission frequency Complementary Integrated 2405 MHz for receiver [Us] rated supply voltage V AC/DC at 50/60 Hz ( %) Immunity to microbreaks Maximum sensing distance Response time 10 ms Channels utilisation <= 60 Power consumption in W Breaking capacity Breaking capacity ft (100 m) (in free field) ft (25 m) (transmitter in a plastic box type XAL D and receiver in a metal enclosure) ft (40 m) (transmitter in box type XAL D, receiver in metal enclosure and use relay-antenna) ft (60 m) (transmitter in a plastic box type XAL D and use relay-antenna) < 30 ms after transmitter clicks <= 4 W AC/DC 15 W 750 VA Control circuit frequency Hz +/- 10 % Short-circuit protection Operating position 16 A by GB2 circuit breaker Any position without derating Electrical connection 1 conductor cable mm² AWG 24...AWG 12 solid without cable end IEC conductors cable mm² AWG 24...AWG 16 solid without cable end IEC conductor cable mm² AWG 24...AWG 14 flexible with cable end IEC conductors cable mm² AWG 24...AWG 18 flexible with cable end IEC Tightening torque N.m conforming to EN/IEC Housing material Status LED Self-extinguishing plastic 1 LED (green): power ON 1 LED (yellow): communication network 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

2 Mounting support Rated short-duration power frequency withstand voltage [Uimp] rated impulse withstand voltage 5 LEDs (red): function mode 1 LED (green and yellow): reception signal Mounting plate 35 mm symmetrical DIN rail conforming to EN/IEC kvat 50 Hz conforming to EN/IEC kv Surge withstand 1 kv (differential mode) conforming to IEC kv (common mode) conforming to IEC Width Height Depth Product weight Antenna gain Marking Integrated connection type Data storage equipment Topology Port Ethernet Cable distance between devices Web services 4.8 in (122 mm) 3.54 in (90 mm) 2.36 in (60 mm) 0.57 lb(us) (0.26 kg) 0 dbi CE Ethernet Modbus TCP/IP (RJ45 in Modbus TCP network) 10/100 Mbit/s 2 twisted pairs SD card Devices linked by daisy-chaining or tap junctions 10BASE-T/100BASE-T 1000 m Predefined web pages configuration Environment Radio agreement Product certifications Directives SRRC ICASA ANATEL type III conforming to ETSI EN FCC category 2 conforming to ETSI EN RSS category 1 conforming to ETSI EN UL GOST C-Tick CE CCC CSA Standards UL 508 ETSI EN ETSI EN EN/IEC EN CSA C22.2 No 14 EN/IEC Ambient air temperature for storage 1999/5/EC - R&TTE directive 2006/95/EC - low voltage directive 2004/108/EC - electromagnetic compatibility F ( C) Relative humidity 90 % ( F ( C)) without condensation conforming to ETSI EN Operating altitude ft ( m) Storage altitude ft ( m) Vibration resistance +/- 3.5 mm (f= Hz) conforming to IEC gn (f= Hz) on panel mounting conforming to IEC gn (f= Hz) on DIN rail conforming to IEC Shock resistance 10 gn (6000 shocks during 16 ms) conforming to IEC IP degree of protection IP20 (casing) conforming to IEC IP20 (terminals) Pollution degree 2 conforming to IEC Electromagnetic compatibility 1.2/50 µs shock waves immunity test :1 kv (differential mode) conforming to IEC /50 µs shock waves immunity test :2 kv (common mode) conforming to IEC Immunity to microbreaks and voltage drops :10 ms conforming to IEC Dielectric strength 3000 V AC between input and output 4250 V DC between input and output 1500 V AC between input and ground 2

3 2150 V DC between input and ground Ordering and shipping details Category XB5R WIRELESS PUSH BUTTON Discount Schedule I GTIN Nbr. of units in pkg. 1 Package weight(lbs) Returnability Y Country of origin ID Offer Sustainability RoHS (date code: YYWW) REACh Compliant - since Schneider Electric declaration of conformity Schneider Electric declaration of conformity Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold 3

4 Dimensions Drawings Access Point Dimensions 4

5 Mounting and Clearance Access Point on a Mounting Panel The Access Point is installed according to its vertical axis 5

6 Mounting and Clearance Access Point on DIN rail Mounting 6

7 Mounting and Clearance Clearances Maximum Distance between Transmitter and the Access Point in Free Field Unobstructed (1) Transmitter (2) Access Point Maximum Distance between Transmitter and the Access Point in a Metal enclosure without a Relay Antenna (1) Transmitter (3) Access Point in a Metal enclosure Maximum Distance between Transmitter and the Access Point in a Metal Enclosure with a Relay Antenna (1) Transmitter (3) Access Point in a Metal enclosure (4) Relay Antenna Maximum Distance between Transmitter and the Access Point in a Metal Enclosure with a Passive Antenna (1) Transmitter (2) External Antenna (3) Access Point in a Metal enclosure The range is reduced if the transmitter is placed in a metal enclosure (reduction factor : approx 10%) Glass window % Plaster wall % Brick wall 60 % Concrete wall % 7

8 Metal structure % 8

9 Mounting and Clearance Access Point Clearances (1) Power Supply (2) Programmable Logic Controller 9

10 Connections and Schema Access Point Wiring Diagram (1) wire sizes for Power Supply terminals (L/+,N/-) 10