KC Class 2 Bluetooth Audio Module. Features. Bluetooth Audio Profiles. Custom Audio Profiles. Description
|
|
- Lucas Porter
- 6 years ago
- Views:
Transcription
1 Features CSR BlueCore5 chip set Bluetooth v.0 Class radio, range typically exceeds 0m +8dB PA Output RF Gain High speed wireless data rate up to Mbps Digital & analog stereo input Digital & analog stereo output 6 bit ADC/DAC stereo CODEC 9 programmable digital I/O pins 6 Mbit flash memory USB, UART, IC, IS, PCM, and SPDIF interfaces 9.7 mm x 5.0 mm x.7 mm Onboard Antenna Bluetooth Audio Profiles Custom Audio Profiles ADP Advanced Audio Distribution Profile Stereo streaming with SBC, MP, AAC, APTX compression options. Source or Sink profile. KCSI Profile Stereo + Intercom High speed, Channel audio full stereo streaming with live voice back channel. AVRCP Audio Video Remote Control Profile Standard remote audio playback controls. Controller or Target profile. Low Latency Stereo High speed, high quality stereo for real time applications TV, Video Games, Interactive HFP Hands Free Profile Standard bi directional mono cell phone headset profile. Intercom Optimized for high quality wireless telephone or intercom service. AGHFP Audio Gateway to HFP Standard bi directional mono cell phone gateway profile connects to HFP mono headsets. Description The KC 6 is a highly tuned and completely integrated wireless audio transceiver subsystem ready for installation in audio devices. The KC 6 is a pre engineered subsystem integrating a wireless radio, digital audio system, and programmed firmware profiles that define features, configurations, and user interface. All firmware offered by KC Wirefree can be customized for OEM clients. In many cases a few changes can produce great value by differentiating and improving your product. 0 KC Wirefree Page of 5 Version September 04, 0
2 Firmware Please see our Audio User Guides for more information on specific features and operation. kcaudioadapter Edition The kcaudioadapter firmware streams high quality stereo audio to a headset. It is fully compatible as a Bluetooth ADP "Source" device, and also supports AVRCP profile. The kcaudioadapter will transmit the analog audio from the LIN and RIN input pins, or optionally, from the digital audio from the USB or PCM interfaces. The stereo signal is then compressed, segmented into Bluetooth packets, and transmitted wirelessly to the kcaudioheadset. kcaudiogateway Edition The kcaudiogateway firmware provides two way voice communications to a standard Bluetooth cell phone headset. It is fully compatible as a Bluetooth AGHFP device. The kcaudiogateway will transmit the analog mono audio from the LIN input pins, or optionally, as digital audio from the USB or PCM interfaces. The input signal is then compressed, segmented into Bluetooth packets, and transmitted wirelessly to a Bluetooth headset. Also, the microphone signal from the headset is received, and available through the LOUT output pins, or optionally as digital audio to USB or PCM. kcaudioheadset Edition The kcaudioheadset firmware will receive the wireless stereo signal, decompress, and convert to analog audio available on the LOUT and ROUT output pins. Optionally, the output can be directed to the USB or PCM interfaces. It is fully compatible as a Bluetooth ADP "Sink" device, and simultaneously as a Bluetooth HSP cell phone "Mono Headset" device supporting HFP profile. KCSI Stereo + Intercom Profile Additionally, we have a custom, patent pending, profile we call KCSI enabled by default. This profile is in addition to the standard Bluetooth profiles, and is included in both kcaudioadapter and kcaudioheadset firmware versions. Our patent pending KCSI profile is a real time Stereo + Intercom communication system. There are two major features in the KCSI profile that do not exist in standard Bluetooth ADP. Bluetooth v.0 does not have enough bandwidth for uncompressed stereo signals. The audio stream is compressed with either the Bluetooth default SBC (sub band coding) codec, or our low latency audio codec when using our KCSI profile. We designed KCSI for real time applications like gaming and television. KCSI is about three times faster than SBC, and the entire system provides audio with around 45ms wireless delay, which is under the perception time for lip sync problems. Second, we added a live intercom back channel. The kcaudioheadset when connected using the KCSI profile, will send the wireless microphone signal back to the kcaudioadapter. Thus, a mono audio signal connected to the kcaudioheadset LIN pin will be available on both LOUT and ROUT (dual mono) pins on the kcaudioadapter. KCSI Stereo + Intercom profile is selected by default when connected to another KCSI enabled device. 0 KC Wirefree Page of 5 Version September 04, 0
3 Physical Dimensions KC 6 Pinout Top View KC 6 Landing Pattern Top View 5.0 mm 6.9 mm 5. mm PIO_ PIO_ 40 9 SPK_RP SPK_RN.4 mm 40 PIO_4 8 SPK_LP.0 mm PIO_5 4 7 SPK_LN PIO_6 5 6 MIC_RP PIO_7 6 5 MIC_RN PIO_8 7 4 MIC_LP PIO_9 PIO_0 LED_BLU MIC_LN MIC_BIAS PCM_IN 9.7 mm LED_RED 0 PCM_CLK UART_RTS 9 PCM_OUT UART_CTS 8 PCM_SYNC UART_TXD 4 7 USB_P UART_RXD 5 6 USB_N V_OUT 6 7 GND 8 RESET 9 VDD 0 ENABLE SPI_CSB SPI_MOSI SPI_MISO 4 SPI_CLK 5 CHARGE.8 mm 0.8 mm.0 mm mm 0.8 mm.0 mm 0.8 mm 0 KC Wirefree Page of 5 Version September 04, 0
4 Pin Assignment Pin Function Type Description PIO_ I/O Programmable I/O PIO_ I/O Programmable I/O PIO_4 I/O Programmable I/O 4 PIO_5 I/O Programmable I/O 5 PIO_6 I/O Programmable I/O [I C] 6 PIO_7 I/O Programmable I/O [I C] 7 PIO_8 I/O Programmable I/O [I C] 8 PIO_9 I/O Programmable I/O 9 PIO_0 I/O Programmable I/O 0 LED_BLU Input Blue LED Drain LED_RED Input Red LED Drain UART_RTS Output UART Request To Send UART_CTS Input UART Clear To Send 4 UART_TXD Output UART Data Transmit 5 UART_RXD Input UART Data Receive 6 V_OUT Output Onboard.V Regulator Output 7 GND Ground 8 RESET Input Reset (Active Low >5ms) 9 VDD Input VDD/Battery Input (.9V 4.4V) 0 ENABLE Input Onboard Regulator Enable (Internal latch) SPI_CSB I/O SPI Chip Select SPI_MOSI I/O SPI Master Out SPI_MISO I/O SPI Master In 4 SPI_CLK I/O SPI Clock 5 CHARGE Input Battery Charging Supply (Only use with battery powered VDD) 6 USB_DN I/O USB Data Negative 7 USB_DP I/O USB Data Positive 0 KC Wirefree Page 4 of 5 Version September 04, 0
5 8 PCM_SYNC I/O PCM Sync [I S WS] 9 PCM_OUT Output PCM Out [I S Out] [SPDIF Out] 0 PCM_CLK I/O PCM Clock [I S Clk] PCM_IN Input PCM In [I S In] [SPDIF In] MIC_BIAS Output Microphone Bias MIC_LN Input Audio Input Left Negative 4 MIC_LP Input Audio Input Left Positive 5 MIC_RN Input Audio Input Right Negative 6 MIC_RP Input Audio Input Right Positive 7 SPK_LN Output Audio Output Left Negative 8 SPK_LP Output Audio Output Left Positive 9 SPK_RN Output Audio Output Right Negative 40 SPK_RP Output Audio Output Right Negative [Option features in brackets] 0 KC Wirefree Page 5 of 5 Version September 04, 0
6 Interface Pins PIO Pins [ 9] PIO pins are LOW by default, and button presses used for device operation are HIGH signals. Pins are generally.v level logic (dependent upon VDD). PIO inputs are debounced to 0ms. Several PIO pins are assigned functions in default versions of firmware. Custom programmed functions are available. Inputs can be configured for weak pull up, weak pull down, strong pull up, strong pull down. Voltage input tolerance and output level is directly related to the VDD level. Specific functions are enabled on designated PIO pins depending on firmware version. Please refer to our Audio User Guide for complete information regarding specific features and PIO assignments. LED Pins [0 ] Two open drain LED output pins are available. The LED's need a positive.v (maximum) supply, and a current limiting resistor. UART Pins [ 5] The UART is compatible with the 6450 industry standard. Upcoming kcaudio firmware will implement an AT Command set for configuration and operation. Pins are generally.v level logic (dependent upon VDD). V_OUT Pin [6] The module has several onboard regulators. The onboard V regulator supplies the PIO, PCM, SPI, UART, and USB Pins. The class module has up to 00mA available from this pin. The class module also uses the onboard V regulator to supply the RF Power Amp, and has less than 0mA available from this pin. GND Pin [7] VSS ground plane. RESET Pin [8] The module will reset when pulled LOW >5ms. VDD Pin [9] Minimum VDD is.9v. Supplies several onboard regulators, and is also the designated Battery P terminal if powering directly from a Lithium Ion battery. The VDD pin may receive a recharge current supply when the voltage reading from this pin measures below 4.0V, the CHARGE Pin is connected to a power supply, and firmware has enabled battery monitoring and charging (default behavior). This VDD pin supplies the onboard Seiko S LDO V regulator. Note: the Seiko S has a 00mV dropout, so if VDD is <.5V, then the V supply rail will have a 0.V dropout. The V rail supplies PIO, PCM, SPI, UART, and USB Pins. ENABLE Pin [0] Enables internal voltage regulators. The ENABLE pin can be utilized in two different ways. Our current default firmware uses the ENABLE pin in Switch Power Mode, where it should be tied to the VDD pin, and used with an external power switch. In Switched Power Mode, our BTB functions are typically assigned to PIO 4. Please see specific firmware User 0 KC Wirefree Page 6 of 5 Version September 04, 0
7 Guides for details regarding PIO function assignments. Alternatively, firmware can utilize the ENABLE pin in Battery Power Mode, which uses a momentary ON/OFF button to power up. Once powered up, the internal voltage regulators will latch on, and then the ENABLE pin is used for BTB assigned functions. This is typically intended for a battery powered headset application with minimal buttons. Separate firmware must be used that assigns this behavior to the ENABLE pin. SPI Pins [ 4] We highly recommend including test points for the four SPI signals, used for firmware loading and diagnostics. The SPI interface is unavailable for general usage, and only interfaces with chip manufacturer diagnostic applications. Pins are generally.v level logic (dependent upon VDD). CHARGE Pin [5] Provide power supply for battery charging, when a battery is connected to VDD, and firmware enables battery monitoring and charging function (enabled by default). Do not connect without a Lithium Ion battery connected to VDD Pin. USB Pins [6 7] These interfaces are available with custom configuration. USB can be programmed for plug n play operation using standard USB Audio drivers available on PC, Mac, and Linux. PCM Pins [8 ] Pins are generally.v level logic (dependent upon VDD). MIC_BIAS Pin [] Provides a DC bias intended for electret microphones. Configurable.8V.V (default =.69V) with a current of 00uA.9mA (default = 0.67mA). MIC Pins [ 6] Microphone or line level analog audio input. Impedance is 6.0kΩ 0kΩ depending on volume setting. ADC operates at 8,.05, 6,.05,, and 44.kHz. Input signal should be 4mVrms 800mVrms. Input gain is adjustable from SPK Pins [7 40] Output gain is adjustable from 45dB to +.5dB. 0 KC Wirefree Page 7 of 5 Version September 04, 0
8 Electrical Characteristics Absolute Maximum Ratings Min Max Unit Storage temperature range C Supply voltage VDD Volts Supply voltage CHARGE Volts Supply voltage ENABLE Volts Recommended Operating Conditions Min Typical Max Unit Temperature range C Supply voltage VDD pin Volts Supply voltage CHARGE pin Volts Supply voltage ENABLE pin Volts Current Consumption Avg Unit Stereo 6 ma Mono Headset 6 ma No Connection ma Peak current 70 ma RF Characteristics Min Max Unit Carrier Frequency MHz Transmission Line Ω Transmission Power 0 +8 dbm Receive Sensitivity 0 90 dbm (Conditions VDD LDO =.V and 5 C) 0 KC Wirefree Page 8 of 5 Version September 04, 0
9 Electrical Characteristics PIO, UART, SPI Pins Operating Characteristics Min Typical Max Unit Input Voltage Low Logic 0. VDD LDO x 0.5 Volts Input Voltage High Logic VDD LDO x 0.65 VDD LDO + 0. Volts Output Voltage Low Logic Volts Output Voltage High Logic VDD LDO x 0.75 VDD LDO Volts Output Current Low Logic 4.0 ma Output Current High Logic 4.0 ma Input Leakage Current na Input Schmitt voltage VDD LDO x 0.5 VDD LDO x 0.65 Volts Input Capacitance pf Weak pull up (default) 500K M Ω Weak pull down (default) 500K M Ω Strong pull up (optional) 0K 50K Ω Strong pull down (optional) 0K 50K Ω Note: The VDD pin supplies the onboard.v LDO regulator. VDD LDO is the voltage supplied to the chipset by the onboard regulator. So, if VDD <.5V, then VDD LDO = VDD 0.V 0 KC Wirefree Page 9 of 5 Version September 04, 0
10 Electrical Characteristics Analog Audio Pins Audio ADC Characteristics Min Typical Max Unit Input full scale at maximum gain (differential) V rms Input full scale at minimum gain (differential) V rms Resolution 6 Bits Sample Rate khz SNR (@ 8KHz sampling) 79 db Digital Gain 4.5 db Analog Gain 4 db db bandwidth 0 khz Microphone mode input impedance Ω THD+N (microphone rms input 0.04 % Audio DAC Characteristics Min Typical Max Unit Output voltage full scale swing (differential) V rms Resolution 6 Bits Sample Rate 8 48 khz SNR (@ 8KHz sampling) 95 db Digital Gain 4.5 db Analog Gain 0 db THD+N (@ 00kΩ load) % 0 KC Wirefree Page 0 of 5 Version September 04, 0
11 Hardware Design Modules provide UART, USB, SPI, and PIO hardware interfaces. This section illustrates a typical implementation, and does not consider all cases. Our engineers are available to review designs and answer any other design questions. Contact our engineering department directly by tech@kcwirefree.com Antenna Design The KC 6 has an onboard antenna that greatly simplifies deployment. Avoid all metal traces, components, enclosures, and ground planes close to the antenna area which will negatively affect RF performance. Other materials can also negatively affect RF performance. 8mm is a minimal clearance area from metallic components or traces. Application Notes Power supply to module should have less than 0mV rms noise between 0 0MHz, and spikes should be minimal. 0 KC Wirefree Page of 5 Version September 04, 0
12 Circuit Example V POWER SWITCH APPCLICATIONS CONNECT BTB BUTTON TO PIO_04 BATTERY POWER ON/OFF BUTTON CONNECT BTB BUTTON TO ENABLE KC-50 KC-60 BLUETOOTH MODULE POWER SWITCH OPTION BATTERY ON/OFF BUTTON OPTION SW8 LITHIUM_P SPI TEST POINTS MOM_S WITC H FIRMWARE UPDATES DIGITAL AUDIO OPTIONAL USB AUDIO PCM, IS, SPDIF ANALOG AUDIO OUTPUT OPTIONAL AMPLIFIE R TPA6A ANALOG AUDIO INPUT 5nH OPTIONAL OPTIONAL ATTE NUATION NOIS E FILTE R 5nH STEREO OUTPUT.5MM JACK INPUT.5MM JACK V K K V 0.UF 0.UF 0.UF 0.UF.UF.UF UF 7.5K.K UF 5PF 5PF UF 7.5K 0K.K V B 4 R C C6 0NF 0.UF BUTTON BTB BUTTON VOLUP BUTTON VOLDN BUTTON 4 REWIND BUTTON 5 FORWARD F TR L UF 5PF 5PF.K UF.0UF.UF 4 RF PIO PIO PIO4 PIO5 PIO6 PIO7 PIO8 PIO9 LED_BLU LED_RED UART_RTS UART_CTS UART_TXD UART_R XD V_OUT SPK_R+ SPK_L- SPK_R- SPK_L+ MIC_L- MIC_R + MIC_R - MIC_L+ USB_D- MIC_BIAS PCM_IN PCM_CLK PCM_OUT PCM_SYNC USB_D+ CHARGE GND RESET VDD ENABLE SPI_CSB SPI_MOSI SPI_MISO SPI_CLK GND RF GND F U VCC VCCIO VOUT GND USBDM USBDP RESET OSCI OSCO TXD RXD 5 RTS CTS DTR DS R DCD 0 RI CBUS0 CBUS CBUS CBUS CBUS4 TEST GND 7 GND 8 GND PIO0 MICBIAS INPUT_R INPUT_L 4 5 US B_5V US B_5V BEAD AGND GND VDD A B ON OFF INL- INL+ INR+ INR- HPVDD CPP PGND CPN OUTR G0 G HPVS S SGND OUTL VDD EN US B US B 0 KC Wirefree Page of 5 Version September 04, 0
13 Pre Qualifications Bluetooth The KC 6 is registered with and licensed by Bluetooth SIG as a qualified design. Qualification Design ID: B0508 Bluetooth Version:.0 Qualified Profiles: ADP, AVRCP, BB, GAP, HCI, HFP, HSP, LCAP, LM, RFCOMM, SDP, SPP Usage of Bluetooth registered trademarks must be licensed directly from Bluetooth SIG. A no cost membership is currently offered for trademark usage, and no cost Bluetooth product listings are currently offered for products containing our pre qualified Bluetooth modules. FCC The KC 6 is registered with and granted modular approval by the Federal Communications Commission. The KC 6 meets the conducted and radiated emission requirements of the FCC "Code of Federal Regulations" Title 47, Part 5, Subpart C, Section 5.47 for Bluetooth spread spectrum transmitters. With a written agreement, Original Equipment Manufacturers may use our FCC ID transmitter license. The following FCC ID must be visible on the exterior of final the product. CE FCC ID: [Approval Pending] The KC 6 complies with the following EMC Directives: Industry Canada EN 00.8 V.6. (004 ) [Approval Pending] IC Warning Statement: The device s user manual does not contain the following or equivalent statement as per RSS GEN section 7..5: Operation of this device is subject to the following two conditions: () this device may not cause interference, and () this device must accept any interference, including interference that may cause undesired operation of the device. RoHS RoHS compliant. SAR SAR compliant. IC ID: [Approval Pending] 0 KC Wirefree Page of 5 Version September 04, 0
14 Datasheet Revisions Revision September 9, 0 September 4, 0 Changes Draft. Corrected LED pin assignments, added additional electrical information. 0 KC Wirefree Page 4 of 5 Version September 04, 0
15 Ordering Information Product Series Country of Manufacture KC 6 USA Order Part Number KC 6 AA KC 6 GW KC 6 HS KC 6 FW Description w/ Audio Adapter Firmware w/ Audio Gateway Firmware w/ Headset Firmware w/ Custom Firmware Contact Information KC Wirefree 640 W Medtronic Way Tempe, Arizona 858 (60) Phone info@kcwirefree.com tech@kcwirefree.com Website Sales Support Technical Support 0 KC Wirefree Page 5 of 5 Version September 04, 0
BlueAudio KC Bluetooth Audio Profiles. Features. Description
Bluetooth Audio Profiles Features 9.7mm x 5.0mm x.mm CSR BlueCore5 chip set Bluetooth v.0 Class radio, range typically exceeds 0m +8dB PA Output RF Gain Analog differential stereo inputs and outputs 9
More informationDRAFT KC Class 2 Bluetooth Audio Module. Features. Bluetooth Audio Profiles. Custom Audio Profiles. Description
Features CSR BlueCore5 chip set Bluetooth v.0 Class radio, range typically exceeds 0m +8dB PA Output RF Gain High speed wireless data rate up to Mbps Digital & analog stereo input Digital & analog stereo
More informationEB35W1M Bluetooth Stereo Audio Module
EB35WM Bluetooth Stereo Audio Module EB35WM Datasheet Product Description The EB35WM Bluetooth stereo audio module is based on CSR BC05 chip BC57E687. The module has been integrated with most of the peripheral
More informationKC OEM Hi Power Bluetooth Data Module Datasheet. Firmware Features. Hardware Features. Applications. Description
Firmware Features Wireless Data Communications Subsystem Embedded Bluetooth Serial Port Profile (SPP) Easy To Use AT Command Interface Using UART Remote Command And Control Multipoint / Piconet Capable
More informationSPK ELECTRONICS CO., LTD.
BTM501 Bluetooth Stereo Module Data Sheet class 2 CSR BC5 DESCRIPTION BTM501 is certified by Bluetooth v2.1 + EDR Specification System It BTM501 is a fully integrated Bluetooth Class 2 module using CSR
More informationKey Specifications. Description. Applications BC127. Datasheet
Key Specifications Bluetooth Certified 4.0 Audio module Dual Mode: Bluetooth and Bluetooth Low Energy (BLE) Backwards compatible with 1.1, 2.0, 2.1 + EDR and 3.0 Embedded Bluetooth Protocol Stack Supports
More informationBluetooth Audio Module. User s Manual HL-BC05R-HS. Bluetooth V2.1+EDR Ver
Bluetooth Audio Module User s Manual HL-BC05R-HS Bluetooth V2.1+EDR Ver 3.8.3.00 2012-07 Welcome Thanks for your purchase of the Bluetooth Serial Adapter. Featuring Bluetooth wireless technology, The Class
More informationKC-21. Bluetooth OEM Module Datasheet. Firmware Features. Applications. Hardware Features. Description
Firmware Features Wireless Data Communications Subsystem Embedded Bluetooth Serial Port Profile (SPP) Easy to Use AT Command Interface Using UART OEM Programmable Configuration Remote Command And Control
More informationBLK-MD-BC05-B Bluetooth Module SPECIFICATION. Page 1 of 7
BLK-MD-BC05-B Bluetooth Module SPECIFICATION Page of 7 . Description BLK-MD-BC05-B is the latest generation of Bolutek s stereo bluetooth modules. It provides the highest level of integration with integrated.4ghz
More informationBM150 Class 2 Multimedia Module Qualified CSR, BC57E687C Dec 2009
Features: Bluetooth Spec. V2.1+EDR Compliant Class 2 type Output Power Support Firmware Upgrade USB 1.1 and UART Host Interface Multi-Configurable I2S, PCM or SPDIF Interface Integrated Switched-Mode Regulator
More informationLM780 Bluetooth Serial Data Module 25m Distance with On-Board Antenna
Bluetooth Serial Data Module 25m Distance with On-Board Antenna Product: 1 General Description is LM Technologies Ltd Class 2 Bluetooth Data module with on-board chip antenna. This module is a CSR Bluecore
More informationLM072 Bluetooth 2.0 / EDR Serial Data Module Class 1 BC04, 8MB Flash, Up to 100m
Bluetooth.0 /. + EDR Serial Data Module 0700 0/MAR/0 8.mm mm Features Applications Bluetooth standard v.0 and BT v. + EDR specification Serial Communications SPP firmware supported by default. Medical
More informationSerial Cable Replacement Data Acquisition Remote Sensors RFID Tag Readers HFP Handsfree Profile Remote phone control (without audio link).
Features CSR BlueCore 4 external chipset Bluetooth v3.0 Class 2 radio, range typically exceeds 20m 12 Digital programmable I/O Pins 2 Analog programmable I/O Pins Low power connection modes < 1mA Easy
More informationLM072 Bluetooth Module Standalone (With Embedded Bluetooth v2.0/v2.1 Stack)
Bluetooth Module Revised 3/JAN/2018 2.8mm 28.2mm 15mm Features Bluetooth v2.0, v2.1 wireless technologiy SMT Side and Bottom Pads for easy production 18 dbm Tx Output Power and 82 dbm Rx Sensitivity See
More informationKC-22. Bluetooth OEM Micro Module Datasheet. Firmware Features. Applications. Hardware Features. Description
Firmware Features Wireless Data Communications Subsystem Embedded Bluetooth Serial Port Profile (SPP) Easy to Use AT Command Interface Using UART OEM Programmable Configuration Remote Command And Control
More informationKC-21. Class 2 Bluetooth Data Module. Firmware Features. Hardware Features. Applications. Description
Firmware Features Wireless Data Communications System Embedded Bluetooth Serial Port Profile (SPP) Remote Command And Control Low Power Connection Modes < 500µA Easy To Use AT Command Interface Using UART
More informationUNIGRAND BM0400 Generic Bluetooth Class II Module
UNIGRAND BM0400 Generic Bluetooth Class II Module KEY FEATURES Bluetooth 2.0+EDR Power Level Class 2 (Max 4dBm) External Antenna BQB qualified APPLICATIONS RS232 Replacement Wireless HID Keyboard/Mouse
More informationBT 31 Data Sheet. Amp ed RF Technology Inc.
BT 31 Data Sheet Amp ed RF Technology Inc. Product Specification BT31 Features Bluetooth features FCC&Bluetooth licensed radio Bluetooth v3.0 Class 1 radio Range up to 100m LOS 1.5Mbps data throughput
More informationLM071 Bluetooth 2.0 / EDR Module Class 2 BC04, 8MB Flash, Up to 25m
Bluetooth.0 /. + EDR Module 0700 0/MAR/05 5mm.5mm Features The module is a Max dbm (Class) module. AT Command Set provided for module configuration Bluetooth standard v.0 and BT v. + EDR specification
More informationSee version notes page for changes EPOS. Aviation M2M LNG
Bluetooth Module with IC Antenna Features Revised 16/MAY/2018 See version notes page for changes Bluetooth.0,.1 wireless technology Configurations preinstalled on production 18 dbm Tx Power and 88 dbm
More informationKC-22. Class 2 Bluetooth Data Micro Module. Firmware Features. Hardware Features. Applications. Description
Firmware Features Wireless Data Communications Subsystem Embedded Bluetooth Serial Port Profile (SPP) Remote Command And Control Easy To Use AT Command Interface Using UART OEM Programmable Configuration
More informationProduct Specification
Product Specification 15mm x 27mm Description One of the most capable Bluetooth modules available, the BT-21 Bluetooth OEM Module is designed for maximum flexibility. The BT-21 module includes 14 general
More informationProduct Specification
Product Specification Features Amp ed RF, Inc. Description 15mm x 27mm The added class 1 power, +18dBm, of the BT-11, gives this module one of the best ranges in the industry. It s completely pin compatible
More informationBM81SPK01 Bluetooth 3.0+EDR Wireless Speaker Module
BM81SPK01 Bluetooth 3.0+EDR Wireless Speaker Module Features: ~Main Chip: ISSC IS1681S ~Bluetooth 3.0+EDR compliant ~Typical +2dBm Class 2 output power ~Receiver Sensitivity: GFSK typical -91dBm, π/4 PSK
More informationBluetooth Class 1 OEM Module. Parani-BCD100 Product Datasheet
Bluetooth Class 1 OEM Module Parani-BCD100 Product Datasheet Version 1.0.5 July 6, 2011 Sena Technologies, Inc. Copyright Copyright 2011, Sena Technologies, Inc. All rights reserved. Sena Technologies
More informationGiga Bluetooth module design datasheet
Giga Bluetooth module design datasheet Doc Version : 20070831 Product ID Product Name Firmware Version Hardware Version egm-a02 CSR BC4 class 1 Bluetooth module Rev.1.1 1. DESCRIPTION egm-a02 full qualified
More informationGWBMA0x Bluetooth Audio module
GWBMA0x Bluetooth Audio module Data sheet version 0.9 draft GWBMA0X DATASHEET 0.9 GIGAWIT 1 Introduction GWBMA1X is a high performance Bluetooth audio module, It provides various type of wireless audio
More informationRN41/RN41N Class 1 Bluetooth Module
RN41/RN41N Class 1 Bluetooth Module Features Fully qualified Bluetooth version 2.1 module, supports version 2.1 + Enhanced Data Rate (EDR) Backwards-compatible with Bluetooth version 2.0, 1.2, and 1.1
More informationAUBTM-23. Bluetooth V2.0 Class 2 module. Product datasheet. General Description
Bluetooth V2.0 Class 2 module Product datasheet General Description AUBTM-23 is Bluetooth Core V2.0 compliant module. The module is designed to be embedded in a host system which requires cable replacement
More informationProduct Data Sheet. Rev Module Data Sheet MODEL : HC-05. Linvaor is the former of Wavesen. 2010/5/ /4/6. DRAWN BY : Ling Xin
Product Data Sheet Module Data Sheet Rev 1 1.0 1.01 2010/5/15 2011/4/6 DRAWN BY : Ling Xin MODEL : HC-05 CHECKED BY : Eric Huang Description: BC04 has external 8M Flash and EDR mode HC-03 is industrial,
More informationBluetooth Class 2 Module MBH7BTZ39 Datasheet
Bluetooth Class 2 Module MBH7BTZ39 Datasheet Rev. 0.41 Mar 10, 2010 The above products are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial
More informationRN-42/RN-42-N Class 2 Bluetooth Module
RN-42/RN-42-N Class 2 Bluetooth Module Features Fully qualified Bluetooth version 2.1 module, supports version 2.1 + Enhanced Data Rate (EDR) Backwards-compatible with Bluetooth version 2.0, 1.2, and 1.1
More informationCt-BT04 Specification Sheet
Ct-BT04 Bluetooth Module Specifications Sheet V0.3 Part :1-1S61-271R002 Description: Class2 BT SPP Module Connectec Electronics Co., Ltd. 1/10 1. Hardware & Technical Information 1.1 definition 1 GND Ground
More informationData Sheet v0.6. Key Features. Small size 15.0 x 30.0 x 2.8mm
Data Sheet v0.6 AA Wirreel leessss SSool luut tioonn Coomppaannyy BTR140 CLASS 1 BLUETOOTH TRANSCEIIVER MODULE Key Features Small size 15.0 x 30.0 x 2.8mm Bluetooth specification v1.1 Compliant Class 1
More informationWT32i Bluetooth Audio Module
WT32i Bluetooth Audio Module Topics Key Features Benefits WT32i Specifications iwrap TM Bluetooth Software Certifications Development Tools Use Cases Bluetooth 3.0 compliant Key Features Integrated iwrap
More informationBLUETOOTH MODULE. Model BT-20
BLUETOOTH MODULE Model BT-20 Device Features 3.3V power operation Fully qualified by BQB Full speed Bluetooth operation with full piconet support 8M flash memory for application firmware Applications PC
More informationLM400 Plug & Play Bluetooth SMT Module Class 1
Plug & Play Bluetooth SMT Module Class Fw.55 + BT.0 00050 Fw. + BT. 0005 Fw.55 + BT.0 Fw. + BT. /MAR/05 Part No 00050 Part No 0005 Features CSR BlueCore Small Outline 0mm x mm x mm Bluetooth.0 / ER Support
More informationES- JBM-141SPP Module. Application Note
ES- JBM-141SPP Application Note ES- JBM-141SPP Module Application Note Version 1.0 1 1 Key Features Bluetooth Specification V2.0+EDR compliant JBM-141SPP:Class 2(
More informationModel: SJR-BTM334. Version: V
Bluetooth Module Datasheet Model: SJR-BTM334 Version: V1.1 2018-10-12 Sky Jiarun Technologies Co., Ltd. Tel: (0755)85279490 E-mail: sales@tianjiarun.com Web: www.tianjiarun.com Fuyong, Baoan, Shenzhen
More informationLM961 Bluetooth Dual Mode Module Standalone (With Embedded Bluetooth v4.1 Stack)
Bluetooth Dual Mode Module Revised 13/DEC/2017 18.9mm 2.55mm 12.71mm Features Bluetooth v4.1 specification (Dual Mode) Fully integrated module with no additional components required Class 1 Tx Out Power
More informationBLE Bluetooth Low Energy Modules SBC2112-B. Preliminary Specification. Version 1.0
BLE Bluetooth Low Energy Modules SBC2112-B Preliminary Specification Version 1.0 23-JUN.-2014 Content 1. Description...3 2. Features...3 3. Block Diagram...3 4. Radio Characteristics...4 5. Electrical
More informationLM780 Bluetooth Module with IC Antenna
Bluetooth Module with C Antenna Revised 11/JAN/2018 Datasheet ersion 1.0 Features Bluetooth v2.0 / v2.1 specification 26.92mm x 15.20mm x 2.0mm 4 dbm Tx Output Power (Class 2) SMT Side and Bottom Pads
More informationibt-15 / ibt-15s ( Declaration ID : B0xxxxx )
( Declaration ID : B0xxxxx ) Doc. Name : ibt-15-rev0.0.03.doc Date : 2014-09-02 Revision : 0.0.03 Copyright, 2014 by Engineering Department, Valence Semiconductor Design Limited. All rights reserved. No
More informationRayson Bluetooth Module
Rayson Bluetooth Module Low Energy Smart Module Features Bluetooth standard V4.0 conformity. CSR000/00 chip Programmable general purpose PIO controller : Switch-mode power supply. IC for EEPROM and ICs
More informationLM780 Bluetooth Module with IC Antenna
Bluetooth Module with C Antenna Revised 8/NO/2017 Features Bluetooth v2.0 / v2.1 specification 26.92mm x 15.20mm x 2.0mm 4 dbm Tx Output Power (Class 2) SMT Side and Bottom Pads for easy production Low
More informationBT-22 Product Specification
BT-22 Product Specification Features Amp ed RF, Inc. Description 10.4 mm x 13.5 mm Our micro-sized Bluetooth module is the smallest form factor available providing a complete RF platform. The BT-22 is
More informationLM780 Bluetooth Serial Data Module
Features Bluetooth v2.0 + EDR and v2.1 + EDR compliant firmware available Class 2 radio with integrated chip antenna - 25 m range in open space Lead Free, RoHS compliant Small Size: 15.24mm x 27.67mm x
More informationi62l Module A complete Car Bluetooth Solution
i62l Module A complete Car Bluetooth Solution www.bluesoleil.com Introduction IVT has announced the complete Bluetooth solutions.i62l is one of i-series products. I62L is a fully integrated Bluetooth module
More informationBTM-C Datasheet
BTM-C0-2 Datasheet Issued date: September 20, 206 EnzyTek Bluetooth Low Energy Module BTM-C0-2 OVERVIEW Highly integration BT 4.0 Low Energy module, CSR CSR0 + Memory + Filter + X Tal. Wireless communications
More informationLM780 Bluetooth Classic Data Module with IC Antenna
Bluetooth Classic Data Module with C Antenna Revised 7/DEC/206 Features Bluetooth v2.0/ v2. specification 26.92mm x 5.20mm x 2.0mm 4 dbm Tx utput Power (Class 2) SMT Side and Bottom Pads for easy production
More informationMarch 21, BT22 Datasheet. Amp ed RF Technology, Co., Ltd.
March 21, 2011 BT22 Datasheet Amp ed RF Technology, Co., Ltd. BT22 Features Bluetooth features Bluetooth qualified Bluetooth v2.1+edr Class 2 radio Range up to 30m LOS Description 10.4 mm x 13.5 mm Our
More informationCSR Bluetooth Modules MBC05-CAR-AT
CSR Bluetooth Modules MBC05-CAR-AT Specification Version 0.1 25-Aug-2009 Product No.: MBC05-CAR-AT Product Description: Bluetooth v2.1 EDR Class 2 BT Stereo Module Issue Date: 2009/08/25 Release Version:
More informationNDB-C0706A Dual Mode Bluetooth Module
NDB-C0706A Dual Mode Bluetooth Module 1 Device Overview 1.1 Description This module is designed with Cypress CYW20706 (previously Broadcom BCM20706) dual mode Bluetooth 5.0 SoC. CYW20706 features 96 MHz
More informationBTA-C Datasheet
BTA-C0-2 Datasheet Issued date: September 20, 206 EnzyTek Bluetooth Low Energy Module With on Board Antenna BTA-C0-2 OVERVIEW Highly integration BT 4.0 Low Energy Class II module, CSR CSR0 + Memory + Filter
More informationBluetooth Module Specification
Bluetooth Module Specification Features Bluetooth V4.0 Class2 (also compliant Bluetooth 2.1+EDR) Fully qualified Bluetooth v4.0 specification system Support for Bluetooth v3.0 only available with CSR8510A04
More informationDatasheet DFBM-NQ62X-DT0R. A Bluetooth Low Energy System On Chip Module. Proprietary Information and Specifications are Subject to Change
1 Datasheet DFBM-NQ62X-DT0R A Bluetooth Low Energy System On Chip Module. Preliminary Data Sheet Sheet 1 of 18 Aug. 16, 2016 Contents 1. Features... 3 1-1. General... 3 1-2. Bluetooth... 3 2. Model No.
More informationWizFi250 Datasheet. (Version 1.01)
WizFi250 Datasheet (Version 1.01) 2013 WIZnet Co., Ltd. All Rights Reserved. For more information, visit our website at http://www.wiznet.co.kr For latest version of this document, visit our Wiki site
More informationWRAP THOR WT11 Bluetooth Module. Description. Key Features. Bluetooth Class 1. Two antenna options: integrated chip antenna or U.
WRAP THOR WT11 Bluetooth Module Description WT11 is a next-generation, class 1, Bluetooth 2.0+EDR (Enhanced Data Rates) module. It introduces three times faster data rates compared to existing Bluetooth
More informationFLC-BTM702-DS. Datasheet
FLC-BTM702 Datasheet Document Type: Bluetooth Module Datasheet Document Number: FLC-BTM702-DS Document Version: V1.1 Release Date: April 16, 2018 Edited by: Zhang Chunsheng Reviewed by: Lin Wei Copyright
More informationnblue TM BR-LE4.0-S2A (CC2540)
Page 1 of 7 Copyright 2002-2014 BlueRadios, Inc. Bluetooth 4.0 Low Energy Single Mode Class 1 SoC Module nblue TM BR-LE4.0-S2A (CC2540) AT HOME. AT WORK. ON THE ROAD. USING BLUETOOTH LOW ENERGY WIRELESS
More informationi45 Module A complete Car Kit Bluetooth Solution
i45 Module A complete Car Kit Bluetooth Solution www.bluesoleil.com Introduction IVT has announced the complete Bluetooth solutions. They are BlueSoleil i-series products. I45 is one of i-series products
More informationSerial Port Plug - F2M01SXA Brief Datasheet. Features. Applications. General Description. Provides transparent RS-232 serial cable replacement.
Serial Port Plug - F2M01SXA Features Provides transparent RS-232 serial cable replacement. No need for external drivers. Power is supplied via the D-SUB or mini-usb connector. Supports the Bluetooth Serial
More informationGENERAL SPECIFICATION...
CONTENT 1. INTRODUCTION... 4 1.1 BLOCK DIAGRAM... 4 1.2 FEATURES... 5 1.3 APPLICATIONS... 6 2. GENERAL SPECIFICATION... 7 3. PHYSICAL CHARACTERISTIC... 8 3.1 Pin Description... 10 4. REFERENCE SCHEMATIC...
More informationBT53 Datasheet. Amp ed RF Technology, Inc.
BT53 Datasheet Amp ed RF Technology, Inc. 1 BT53 Product Specification Bluetooth features FCC & Bluetooth licensed radio Bluetooth v4.1 Class 1 radio Range up to 80m LOS 13.5mm x 11.6mm x 2.6mm Description
More informationYBM-1200 Class 2 Bluetooth Module
Yasing Technology Corp. Yasing YBM-1200 Bluetooth Module Manual YBM-1200 Class 2 Bluetooth Module Yasing Technology Corp. (886) 3 5750500 (886) 3 5735512 service@yasingtech.com www.yasingtech.com Version:
More informationWireless Audio Module WMA-9600 WMA-9601 WMA-9602
Document Version: 2.50 Document No: 2009-06-785D Copyright reserve by RPING GROUP LIMITED Wireless Audio Module WMA-9600 WMA-9601 WMA-9602 General Description... 2 WMA-9600 (Receiver Module)... 3 Pin definition
More informationBluetooth Module Datasheet. Model: TS8670
Bluetooth Module Datasheet Model: TS8670 TinySine Electronics @ 2018 CONTENT 1. INTRODUCTION...2 1.1 BLOCK DIAGRAM... 2 1.2 FEATURES...3 1.3 APPLICATIONS... 4 2. GENERAL SPECIFICATION... 5 3. PHYSICAL
More informationPreliminary. PACKAGE - 28-pin MLP (5mm X 5mm) Example Circuit Diagram CP V. 48MHz Oscillator. USB Function Controller 512B EEPROM
Preliminary Single-Chip USB to UART Bridge SINGLE-CHIP USB to UART DATA TRANSFER - Integrated USB Transceiver; No External Resistors Required - Integrated Clock; No External Crystal Required - Integrated
More informationBluetooth Technology Audio Module. Bluetooth radio
EH-MB18 Bluetooth Technology Audio Module Bluetooth radio - Fully embedded Bluetooth v4.0(smart ready) - Bluetooth v3.0 specification compliant - TX power +8dbm,-90dbm RX sensitivity - 128-bit encryption
More informationELET114A Bluetooth Module DATASHEET. Website:http://www.elinketone.com / 7
Bluetooth Module DATASHEET Website:http://www.elinketone.com 2013 06 09 1 / 7 A. Overview Bluetooth Module is designed by ShenZhen ElinkEtone Technology Company for intelligent wireless transmission, with
More informationALPW-BLEM103 Datasheet 1.0 Bluetooth Low Energy HCI
ALPW-BLEM103 Datasheet 1.0 Bluetooth Low Energy HCI FEATURES Ready-to-use Bluetooth Low Energy HCI module Ultra Small form factor 12mm x 12mm Ultra Low Power consumption EM Microelectronic Bluetooth Low
More informationACH1180 Audio Host Processor. Description. Features. ACH1180 Audio Host Processor. Preliminary 1
Audio Host Processor ACH1180 Audio Host Processor Features 64-pin lead-free/rohs compliant QFN or WLCSP package ARM Cortex-M4 with floating point processing option Two programmable fractional-n synthesizers
More informationClass 1 Bluetooth Module - F2M03C1 Datasheet
Class 1 Bluetooth Module - F2M03C1 Features Available with complete Bluetooth software stack Wireless UART functionality without extra protocol. Headset functionality available. Serial interface, 8 digital
More informationWT32 D a t a S h e e t V e r s i o n T u e s d a y, F e b r u a r y 0 5,
WT32 Data Sheet V e r s i o n 0. 9 9 T u e s d a y, F e b r u a r y 0 5, 2 0 0 8 Copyright 2000-2008 Bluegiga Technologies All rights reserved. Bluegiga Technologies assumes no responsibility for any errors,
More informationVN310 Hardware Integration
VN310 Hardware Integration Application Note 08-00041-01 Revision 1.0 December 18, 2012 www.nivis.com Contents 1. INTRODUCTION... 3 2. PIN-OUT AND INTERFACE SUMMARY... 3 3. INTERFACING WITH VN310-I FOR
More informationMonoprice Harmony Bluetooth Wireless Speaker. User Guide P/N 33827
Monoprice Harmony Bluetooth Wireless Speaker User Guide P/N 33827 PACKAGE CONTENTS 1. Bluetooth Speaker x 1 pc 2. Micro USB cable x 1 pc 3. 3.5mm Audio cable x 1 pc 4. User manual x 1 pc FUNCTIONS PANEL
More informationUser Guide. Date Apr BlueEva+C11/G2. Stollmann. E + V GmbH. User Guide
Version r02 Date Apr 2009 Author: ta Date saved: 06.04.09 Ref: BlueEva+C11G2_User_Guide_r02.doc Revision: r02 Page 1 of 22 Note This device was developed for the purpose of communication in an office environment.
More informationWT32 D a t a S h e e t V e r s i o n F r i d a y, S e p t e m b e r 2 1,
WT32 Data Sheet V e r s i o n 0. 9 1 F r i d a y, S e p t e m b e r 2 1, 2 0 0 7 Copyright 2000-2007 Bluegiga Technologies All rights reserved. Bluegiga Technologies assumes no responsibility for any errors,
More informationEnhanced Data Rate (EDR) compliant with V2.0.E.2 of the. specification for both 2Mbps and 3Mbps modulation modes
Key Features Fully Qualified Bluetooth V2.0+EDR Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes BTM-06B CSR,BC417143 B-IRN-E4 REV 02 May
More informationAC108 Datasheet. 4 Channel High Performance Voice Capture ADCs with I2C/I2S. Revision 1.1. July, 30, 2017
Datasheet 4 Channel High Performance Voice Capture ADCs with I2C/I2S Revision 1.1 July, 30, 2017 Copyright 2017 X-Powers Limited.All Rights Reserved REVISION HISTORY Revision Data Author Description V0.1
More informationBLUETOOTH 2.0 UART MODUEL USER GUIDE (BT20_U)
Documents Version: 1.05 Document No. 2013-0015-E Copyright is reserved by Rping Group Limited (2012-2016) BLUETOOTH 2.0 UART MODUEL USER GUIDE (BT20_U) Shenzhen,China: RF WORLD (RPing Group) Rm611,1C,Shuxiangmendi,Longhua,Shenzhen,China
More informationBlueTooth Stick. Additional Board. Manual. MikroElektronika
BlueTooth Stick Manual All Mikroelektronika s development systems feature a large number of peripheral modules expanding microcontroller s range of application and making the process of program testing
More informationSPK Bluetooth 4.0 Dual Mode
SPK Bluetooth 4.0 Dual Mode BR/EDR/LE UART HCI module datasheet Doc. Version : 20140207 Product ID Product Name Firmware Version Hardware Version EBMA19A EBMA19B Bluetooth 4.0 Dual Mode BR/EDR/LE UART
More informationOur default kcgateway is released in two editions: our class 1 KC5012 edition, and our class 2 KC6012 edition (also intended for KC6112 modules).
Firmware User Guide kcgateway v8.1 Build 1 Introduction The kcgateway firmware is an audio source/transmitter system that operates in one of two modes, A2DP Source or AGHFP. New with kcgateway v8.1 we
More informationAH-GC20 GLOBE CRUISER Over-ear Headphones/ Wireless Noise-Cancelling Headphones Owner s Manual
AH-GC20 GLOBE CRUISER Over-ear Headphones/ Wireless Noise-Cancelling Headphones Owner s Manual You can print more than one page of a PDF onto a single sheet of paper. 1 Preparation Unpacking 4 Features
More informationBlueSet Wireless Headset Interface User Guide
BlueSet Wireless Headset Interface User Guide JK Audio Description The BlueSet series of intercom headset adaptors use Bluetooth Wireless Technology to add wireless freedom to your intercom system. BlueSet
More informationBD-SDMAC: IEEE ac SDIO Wireless LAN + Bluetooth Module
BD-SDMAC: IEEE 802.11ac SDIO Wireless LAN + Bluetooth Module Revision History Date Revision Description 09-20-2016 1.0 First Draft 05-31-2017 1.1 Updated Power Specifications 07-21-2017 1.2 Updated Mechanical
More informationMS01W (BES2000-U) True Wireless Stereo Earphone User Manual & Specifications ---Version
MS01W (BES2000-U) True Wireless Stereo Earphone User Manual & Specifications ---Version 20180412 Earphone Basic Specifications Size: single-earphone 23.6 16.3 23.7mm Weight: 4.4g(single-earphone) Charging
More informationGLOBE CRUISER TM AH-NCW500. On-Ear Headphones / Wireless Headphones. Owner s Manual
GLOBE CRUISER TM AH-NCW00 On-Ear Headphones / Wireless Headphones Owner s Manual Getting started Thank you for purchasing your Denon Globe Cruiser headphones. Denon s engineers have taken great care to
More informationSPBT3.0DP1. Bluetooth Classic module. Features
Bluetooth Classic module Datasheet - preliminary data User interface AT command Data Package (DP) Firmware upgrade over UART ETSI, FCC, IC and Bluetooth qualified Single voltage supply: 3.3 V typical Small
More informationLM068 Bluetooth v4.1 Dual Mode RS232 Serial Adapter Standalone (With Embedded Bluetooth v4.1 Stack)
Bluetooth v. Dual Mode RS Serial Adapter Revision Draft v.0.mm mm mm Features World s smallest Bluetooth Serial Adapter (RS) Ease of configuration and setup using the LM9v software Bluetooth v. wireless
More informationUser Manual. Magnetic Wireless Earbuds
User Manual Magnetic Wireless Earbuds Thank you for purchasing the AUKEY EP-B40 Magnetic Wireless Earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance,
More informationCW6611E Bluetooth Audio Player Microcontroller Product Spec
CW6611E Bluetooth Audio Player Microcontroller Product Spec [CW6611E-PS-EN] Versions: 1.0.0 Release Date: 2016/9/23 II Table of content Table of content Table of content... II 1 Product Overview... 1 1.1
More informationLBM313 Datasheet. Version 0.20 March 27, 2014
LBM313 Datasheet Version 0.20 March 27, 2014 1 Introduction The LightBlueM Module is a full-featured Bluetooth 4.0 module with built in 8-bit SoC. It is based on Texas Instruments CC2540 system on chip.
More informationDevelopment Kit Manual. SIM5360_EVB_User Guide_V1.02
Development Kit Manual SIM5360_EVB_User Guide_V1.02 Document Title: SIM5360 EVB User Guide Version: 1.02 Date: 2014-03-18 Status: Document Control ID: Release SIM5360_EVB_User Guide_V1.01 General Notes
More informationFeatures : General Description:
TTL Bluetooth serial Module Class 1 (Model: BTM-T1-C) Based on the new High power Bluetooth serial modules the new low cost Bluetooth serial adapters allow for simple integration into microcontroller designs
More informationGWK5Mx 2.4GHz Wireless Audio Module
GWK5Mx 2.4GHz Wireless Audio Module 1. General Description GWK5Mx is the module version of Gigawit GWK5 family wireless digital audio products. GWK5MO is 0dBm and GWK5MP is 18dBm, it can be easily integrate
More informationWT32i Bluetooth Audio Module + iwrap6 Bluetooth Software
WT32i Bluetooth Audio Module + iwrap6 Bluetooth Software WT32i Key Features and Benefits Topics WT32i vs. WT32 iwrap6 Feature Highlights iwrap6 Firmware Versions MFI, aptx and AAC Licensing WT32i Pricing
More informationProduct Specification for HDWF-39BS HDWF-39D. WiFi+Bluetooth 4.1(HS)+FM Rx Module Spec Sheet
HDWF-39D WiFi+Bluetooth 4.1(HS)+FM Rx Module Spec Sheet Revision History Date Revision Content Revised By Version 2013/03/06 - Preliminary Bart 1.0 2013/05/06 - Modify BT Frequency Band Brian 1.1 2013/08/15
More informationProduct Specification BT-1022
Product Specification Class2 Bluetooth v2.1 Flash Module [Generic Version] BT-1022 Version: 1.0 Tel: 886-2-2377-0282 Fax:886-2-2377-0283 www.atechoem.com/wl Page. 1 Revision History Edition # Reason for
More information