Extruder Controls ExtruVision S

Size: px
Start display at page:

Download "Extruder Controls ExtruVision S"

Transcription

1 Extruder Controls ExtruVision S ExtruVision S - The compact system solution for controlling, visualization, and operating extrusion systems Combination of control panel BA Touch with 5.7'' monitor and control/open loop unit ETR112 Standard for 11 temperature control zones and 1 melt pressure display, expandable up to 12 temperature control zones and a melt temperature display Melt temperature display, melt pressure display/-monitoring, RPM controlled, RPM-/torque display permanent Monitoring of sensors, actuators, temperature, heating current (SUW optional) Operating hour meter Timer Fast, no-interference communication via can bus Safety function on controller Finger tip controls on touch panel Clear and easily understood control pages Alarm overview One-view trend curve display for process monitoring User menu CAN, RS485 standard on controller Recipe administration for 10 recipes Profibus DP optional Language selection german/english (further language optional) User and controller software can be upgraded d_extruvisions_1105gb - 1 We reserve the right to make technical changes PSG Plastic Service GmbH P.O. Box Mannheim Germany Phone Fax info@psg-online.de 05/11

2 ExtruVision S - The compact system solution for small extrusion systems control ExtruVisionS was especially for small extrusion systems designed, to make there data visible and operable for the user. Instead of lots of devices with different operating and display units, ExtruVision S uses only two components - operating panel BA Touch and controller/open loop unit ETR112. Vision S ExtruVision S ExtruVision S ExtruVision S ExtruVision S Extr uvision S ExtruVision S ExtruVisio ruvision S ExtruVision S ExtruVisio ruvision S ExtruVision CAN S ExtruVisio ruvision S ExtruVision S ExtruVisio ruvision S ExtruVision S ExtruVisio Melt pressure P M ϑ % s -1 Temperature Output value RPM Compact Only 2 components. Secure A complete breakdown of the operating panel BA Touch does not effect the controller functionality like e.g. temperature control or drive control. Uniform Operation of all extruder relevant functions by operating panel BA Touch. Communication systems via CAN bus. User friendly Main process parameters are presented in overviews. Clear structure of display in each level of the user dialog. Practice orientated, in cooperation with the customer implemented functions (e.g. RPM adjustment with automatic transfer of scaling, pressure adjustment by key stroke). Easy installation through clearly defined interfaces. Flexible Customer-specific function expansions are realizable simply By CAN-Bus easily expandable. d_extruvisions_1105gb - 2

3 User interface ExtruVision S Clear structure In the header A permanent display of melt temperature, melt pressure, RPM and drive load (torque, load or drive current). Status display for drive and heating. In the information area B the view changes dependent on the shown side. Navigation is done by the menu buttons in the navigation bar C. Start Page The main parameters and system status at a glance. All actual temperature values (color change at limit violation) Zone names freely editable Temperature groups 6 temperature zones per side with all main parameters zone specific arranged. Key for enabling of heating Status messages Zone names freely editable actual value, setpoint value, actual values of heating current, output value Trend graphic For each zone with numerical actual value display, setpoint -/ alarm data entry a setting of output value. Drive RPM - Actual value display Specification of RPM setpoint Bar graph presentation for RPM setpoint and drive load Increment-, decrement keys for RPM setting Keys for drive ON / OFF Password protected setup area for example melt pressure. d_extruvisions_1105gb - 3

4 Technical Data Data interfaces Operating panel BA Touch Controller/open loop unit ETR112 RPM Melt pressure RS485 2/4 wire n.a. Transfer rate 1200/2400/4800/9600/19200 Baud Protocol: MODBUS RTU / PSGII CAN Transfer rate 250 kbaud CANopen - DS401 Profibus-DP n.a. Option EN V2 Ethernet 10/100MBit, RJ45 connection, TCP/IP n.a. Resolution 0.1 rpm Resolution 1 bar (pressure signal must be ma) Electrical security DIN EN , EN , EN DIN EN EN UL Power Supply 24 VDC ( VDC), Power consumption 14VA General DIN EN (VDE 0411) Protection class II Degree of pollution 2 Over voltage category II 24 VDC ( VDC), Power consumption max. 25 VA on load, External device fuse protection 4 A time-delay Display Active viewable screen 5.7, pixel resolution 320 x 240 LED status indication Operating elements Resistive touch n.a. Dimensions WxHxD Housing: 212 x 156 x 79 mm Mounting depth 55 mm Control panel cutout: 198 x 142 mm 125 x 140 x 75 mm Operating conditions Operating temperature C Storage temperature C Operating temperature C Storage temperature C Climatic applicability class % relative humidity, no condensation Average relative humidity < 75 % per year, no condensation Protection type Front side IP 65 (only with provided sealing and 8 Housing IP 20 terminal IP 20 retaining brackets) Mounting Front mounting Installation on DIN rail (DIN EN 50022) Housing Metal housing Metal housing Weight 1.4 kg Ca. 1 kg Standards CE, UL/CSA, CCC, EX22 The device complies with the European Directives for electromagnetic compatibility and low voltages. Pin assignment controller/open loop unit X5 X6 X1 X7 X8 X9 X10 A X1 X1 X2 X1 B X3 X12 X13 X11 X4 T2 T3 T1 X1, X2 Measurement inputs (TC/Pt100), measurement inputs (TC/Pt100) X3 Measurement inputs (TC/Pt100) X4 Measurement inputs (analog inputs) X5, X6 Control outputs , control outputs X7 Alarm outputs 1...3, digital signal inputs X8 Profibus DP (Option) X9 RS485/ V24 X10, T1 CANBus X11, T2 Power Supply X12 Heat current registration, analog outputs X13 Digital inputs 1...4, digital outputs 1...4, analog outputs 1..2 T3 Ethernet A: Status LED's, B: DIP switch EMC Due to EMC conventions signal and measurement lines have to be shielded! Shields have to be connected to the existing grounded terminals on the controller. Notice: The terminal marking was modified. Please refer to the operating instructions for the old terminal marking. d_extruvisions_1105gb - 4

5 X1...X3 temperature measurement inputs PIN X1 X2 X Thermocouple TC, resistance thermometer Pt100 n+ n- n TC Pt100 2-wire Pt100 3-wire Specifications apply for all temperature measurement inputs. For all screw terminals the outgoing line of the cable is marked with an arrow. X12 Heating current recording PIN X12 PIN X12 1 n.a. 7 I22 2 n.a. 8 I23 3 I11 9 I31 4 I12 10 I32 5 I13 11 I33 6 I21 12 I0V Do not connect I0V system overall! Do not ground I0V terminal externally! Specifications apply for all measurement inputs. Maximal 3-3-phase current transformers. Allocation zone/3-phase current transformer by configuration parameters. Option Heating current recording independent from compensation of variations in mains supply voltage by module SUW. X7 Digital signal inputs 1...2, alarm outputs configurable PIN X7 Description 1 I2 Digital signal input 2 2 I1 Digital signal input 1 3 I- Reference potential IN * 4 AL3 Alarm Output 3 5 AL2 Alarm Output 2 6 AL1 Alarm Output 1 7 AL+ Power supply alarm outputs 8 +U Auxiliary voltage + 9 -U Auxiliary voltage - 10 HF ground +U exclusively for control of SSR (consider load curve) as well as power supply for the operating and display unit. Output auxiliary voltage maximal 1.5 A. Do not ground externally! Digital signal inputs I2, I1 I* Ext. auxiliary voltage +U I- Ext. auxiliary voltage -U Alarm outputs AL+ Ext. auxiliary voltage +U AL* + - Ext. auxiliary voltage -U X5...X6 control outputs heating/ cooling O01-O12 = Heating zone 1-12 O13-O24 = Cooling zone 1-12 PIN X5 X6 PIN X5 X6 1 U1 *) U1 **) 8 O06 O18 2 U2 U2 9 O07 O19 3 O01 O13 10 O08 O20 4 O02 O14 11 O09 O21 5 O03 O15 12 O10 O22 6 O04 O16 13 O11 O23 7 O05 O17 14 O12 O24 *) +U: terminal X7/8 (+U) or U ext or terminal X6/1 (U1). **) +U: terminal X7/8 (+U) or U ext or terminal X5/1 (U1). Optical coupler outputs max. 30 VDC, 60 ma per channel. Un On Auxiliary voltage +U see *) and **) + - Ext. auxiliary voltage -U Specifications apply for all temperature measurement inputs. X4 measurement inputs 13+ = Melt pressure ma 14+ = RPM VDC 15+ = Motor load VDC 16+ = spare VDC PIN X4 PIN X X4/13: standard signal I [ ma], X4/14-16: standard signal U [ VDC] n+ n- n Standard -Signal I ma Standard -Signal U VDC X12 & X13 analog outputs AO1 = Screw speed VDC AO2 = spare VDC AO3 = spare VDC AO4 = spare VDC PIN X12 X13 1 AO3 AO1 2 AO4 AO U U Power supply +U by terminal X7/8 or UEXT -U by terminal X7/9 or 0V EXT d_extruvisions_1105gb - 5

6 X13 Digital out- and -inputs 1..4 PIN X13 PIN X13 1 n.a. 7 I1 2 n.a. 8 I2 3 O1 9 I3 4 O2 10 I4 5 O3 11 +U 6 O4 12 -U Power supply +U by terminal X7/8 or U EXT -U by terminal X7/9 or 0V EXT X11 Power supply Controller/ open loop unit CAN-Bus connection controller X10 - BA Touch T PIN 24VDC VDC; external device fuse protection 4 A time-delay Pin assignment Controller X10 BA Touch T 1 CAN-H 9 7 CAN-L 7 2 GND 5 3 Bridge pin 3 and 4 for internal terminating resistor of 120 Ohm. Digital inputs I1...I4 I1 = Emergency switch I2 = Feedback heating switch ON I3 = Drive failure I4 = Fault chain external All digital inputs low-active (24V = good condition) Digital outputs O1...O4 O1 = Disconnection of melt pressure O2 = Heating ON O3 = Drive ON O4 = Melt pressure calibration T2 Power supply PIN 24VDC 1 24 V 2 GND 3 0V VDC B DIP switch setting 1 8 on off BA Touch DIP Meaning 1-4 Address 5-6 CAN baud rate fix 250kBit DIP5: ON, DIP6: OFF 7 Interface standard parameter 8 Without function Digital inputs X9 RS485/V24 interface 9 6 In 5 1 Pin assignment Ext. auxiliary voltage +U -U Ext. auxiliary voltage -U Digital outputs +U Ext. auxiliary voltage +U On + - Ext. auxiliary voltage -U Controller X9 TxD-P 1 TxD-N 2 Txd-V24 3 RxD-N 5 RxD-P 6 RxD-V24 8 GND-24 9 Standard settings for RS485/V24 interface If the DIP switch B Dip 7 ON, the following default settings for the serial data interface (X9) are activated. Protocol PSG II Baud rate No parity 1 Stop bit Standard equipment Controller-/ open loop control unit ETR112 Operating panel BA Touch 12 Universal measurement inputs TCPt 4 analog inputs *) 24 Control outputs (12 heating, 12 cooling) Heating Current Monitoring 3 Alarm outputs 2 Digital function inputs Each 4 digital inputs / outputs *) 4 Analog outputs *) RS485/ V24 CAN interface Communication Ethernet 10/100 MBit USB Device USB Host CAN (to controller/open loop unit) Touch mode Resistive Touch Display LCD STN color, maximal 256 color resolution 1/4 VGA (320 x 240 Pixel) Active viewable screen 5.7, ca. 118 x 86 mm Operating system Windows CE Software on CF-Card *) the in- / outputs are definitely preset. Scope of supply CD-ROM with documentation and software Ordering designations ORDER NUMBER Operating panel BA Touch ExtruVision VS S Controller/open loop unit ETR Option Profibus DP On request Accessories Engineering tool WinKonVis Professional Pressure transducer e.g. Dynisco Connecting cable incl. terminating resistor Single current transformer module ESW40 Single current transformer module ESW75 Single current transformer module ESW200 ORDER NUMBER Type MDT420F-1/2-7C-15-A Individual length on request Current Converter SSW 120 (3 coils) d_extruvisions_1105gb - 6

Installation and Operating Instructions. webremote

Installation and Operating Instructions. webremote Installation and Operating Instructions webremote 02/2012 PSG Plastic Service GmbH 1 Installations- und Bedienungsanleitung webremote Table of Contents 1 Typographical Conventions 2 webremote 2.1 Overview

More information

LBVR1718. Description. Features channel paperless recorder

LBVR1718. Description. Features channel paperless recorder LBVR1718 18 - channel paperless recorder Description It is the world first paperless recorder of the same size in highest resolution 640x480 pixels VGA TFT display, infrared detector, maximum 18 channels,

More information

PRELIMINARY. USB1 / USB2 USB host interface to read data via memory stick. Bus Out (system bus) For connection to a router

PRELIMINARY. USB1 / USB2 USB host interface to read data via memory stick. Bus Out (system bus) For connection to a router sales@jumo.co.uk info@jumo.us Data sheet 705060 Page 1/12 JUMO mtron T Measuring, Control, and Automation System Multifunction panel 840 Brief description The multifunction panel 840 has a touchscreen

More information

KS 3012 PMA GENERAL DESCRIPTION

KS 3012 PMA GENERAL DESCRIPTION PMA KS 301 6 / 1 universal inputs 7 digital inputs Data acquisition with a sampling rate of 15 ms CF card as data storage medium Use as point or line recorder Visualization in up to 6 groups Modbus interface

More information

WTX120. Legal-for-trade industrial weighing terminal. Special features. Data sheet

WTX120. Legal-for-trade industrial weighing terminal. Special features. Data sheet WTX120 Legal-for-trade industrial weighing terminal Special features - Connection of up to 8 SG load cells (350 ohm) via plug terminals - Display resolution up to 30,000, legal for trade up to 10,000e

More information

Operating Instructions

Operating Instructions Operating Instructions Temperature Controller Module ETS 132 net 09/2013 Translation of original operating instructions PSG Plastic Service GmbH 1 Operating Instructions ETS132net Chapter 1 Introduction

More information

IMIO100 IMIO105. DDC controllers. Summary

IMIO100 IMIO105. DDC controllers. Summary IMIO100 IMIO105 DDC controllers Summary DDC (Direct digital control) controller IMIO100 and IMIO105 are free programmable process stations with ARM Cortex M4 processor and OS FreeRTOS. They contain one

More information

mark150s mark150/485s DDC controllers Summary

mark150s mark150/485s DDC controllers Summary mark150s mark150/485s DDC controllers Summary DDC (Direct digital control) controller mark150s and mark150/485s are free programmable process stations with ARM Cortex M4 processor and OS FreeRTOS. They

More information

EX-RC1 Remote I/O Adapter

EX-RC1 Remote I/O Adapter EX-RC1 Remote I/O Adapter The EX-RC1 interfaces between Unitronics Vision OPLCs and remote I/O Expansion Modules distributed throughout your system. The adapter is connected to a PLC via CANbus. Each adapter

More information

Temperature controller Ducted systems

Temperature controller Ducted systems 2 725 Temperature controller Ducted systems Standard model without zoning functions RRV851 Multifunctional controller used for central control of ducted HVAC systems in combination with a QAX850 master

More information

Temperature measurement board, optically isolated, 16/8/4 channels for thermocouples, Pt100, RTD, 18-bit

Temperature measurement board, optically isolated, 16/8/4 channels for thermocouples, Pt100, RTD, 18-bit Temperature measurement board, optically isolated, 16/8/ channels for thermocouples, Pt100, RTD, 18-bit APCI-3200 Up to 16 channels for thermocouples or 8 inputs for resistance temperature detectors (RTD)

More information

MIC-2 Multi-instrument DATA SHEET

MIC-2 Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional) Profibus DP (optional) I/O modules

More information

Industrial Control SE-607

Industrial Control SE-607 Industrial Control SE-607 Controller and visualization combined as an automation solution with infrared touch operation Trend-setting industrial controls for heat treatment plants The controller is equipped

More information

RXL24.1. Room controller RXL. Communicating controller for chilled ceiling and radiator applications CC-02

RXL24.1. Room controller RXL. Communicating controller for chilled ceiling and radiator applications CC-02 s 3 878 RXL Room controller RXL24.1 Communicating controller for chilled ceiling and radiator applications CC-02 The RXL24.1 room controller is used for temperature control in individual rooms. For chilled

More information

ProData data logger. Ethernet. Pulse inputs and Pulse outputs. Thermistor input. Modbus-Ethernet gateway. Memory 32 MB. Threshold value monitoring

ProData data logger. Ethernet. Pulse inputs and Pulse outputs. Thermistor input. Modbus-Ethernet gateway. Memory 32 MB. Threshold value monitoring Ethernet Pulse inputs and Pulse outputs Modbus-Ethernet gateway Thermistor input Memory 32 MB Threshold value monitoring ProData data logger 1 Smart and compact: Save energy costs through the universal

More information

Operating Instructions 12/2010 MN Z-EN XV-152 MICRO PANEL

Operating Instructions 12/2010 MN Z-EN XV-152 MICRO PANEL Operating Instructions 12/2010 MN04802006Z-EN MICRO PANEL 2 Device description 2.3 Device versions 2.3 Device versions Fig. 1 MICRO PANELs are available in the following versions: Basic device Display

More information

PM174 PM174 IEEE1159 ADVANCED POWER QUALITY ANALYZER. Features

PM174 PM174 IEEE1159 ADVANCED POWER QUALITY ANALYZER. Features PM174 IEEE1159 ADVANCED POWER QUALITY ANALYZER The PM174 is a compact, multi-function, three-phase AC powermeter and power quality analyzer specially designed to meet the requirements of users ranging

More information

EX-RC1 Remote I/O Adapter

EX-RC1 Remote I/O Adapter EX-RC1 Remote I/O Adapter The EX-RC1 interfaces between Unitronics Vision OPLCs and remote I/O Expansion Modules distributed throughout your system. The adapter is connected to a PLC via CANbus. Each adapter

More information

Compact Universal Controllers

Compact Universal Controllers 7 865 ISO9001 RWF40... complete with housing Compact Universal Controllers RWF40... The RWF40... is a universal digital boiler temperature / pressure controller with functions designed specifically for

More information

MXPLC. Compact PLC process station. Summary. Application HVAC control systems, data acquisition, interfacing 3 rd party systems.

MXPLC. Compact PLC process station. Summary. Application HVAC control systems, data acquisition, interfacing 3 rd party systems. MXPLC Compact PLC process station Summary The MXPLC is a programmable process station with integrated I/O module with the I/O mix optimized for larger HVAC control applications. The multi-interface process

More information

CAN 300 PRO, Communication Module

CAN 300 PRO, Communication Module 90 Communication Modules CAN 300 PRO, Communication Module Layer 2, 11 Bit and 29 Bit (CAN 2.0 A/B) on the module DIP switch for adress + baud rate Micro Memory Card for saving a project (optional) USB

More information

ProData DATA LOGGER. Chapter 03 ProData data logger. Ethernet. Pulse inputs and Pulse outputs. Modbus-Ethernet gateway. Thermistor input.

ProData DATA LOGGER. Chapter 03 ProData data logger. Ethernet. Pulse inputs and Pulse outputs. Modbus-Ethernet gateway. Thermistor input. ProData DATA LOGGER Ethernet Pulse inputs and Pulse outputs Modbus-Ethernet gateway Thermistor input Memory 32 MB Threshold value monitoring 139 Smart and compact: Save energy costs through the universal

More information

MIC-2 MKII, Multi-instrument DATA SHEET

MIC-2 MKII, Multi-instrument DATA SHEET MIC-2 MKII, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)

More information

MIC-2 MKII & MIC-2 MKII DIN, Multi-instrument DATA SHEET

MIC-2 MKII & MIC-2 MKII DIN, Multi-instrument DATA SHEET & DIN, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)

More information

APPLICATION. Data acquisition Remote I/O I/O extension DESCRIPTION CONSTRUCTION

APPLICATION. Data acquisition Remote I/O I/O extension DESCRIPTION CONSTRUCTION RM 200 Modular I/O system open MODBUS Ethernet Plug-in I/O modules Suitable for CANopen/PROFIBUS-DP/MODBUS/Ethernet Modules for numerous sensors and signals 2, 4 or 8 channels, depending on module version

More information

Data Sheet. Digital Multifunctional Power Meter with LCD Display and Optional Modules WPM D

Data Sheet. Digital Multifunctional Power Meter with LCD Display and Optional Modules WPM D WPM 770 Data Sheet 679.D.141.02 Digital Multifunctional Power Meter with LCD Display and Application The digital Weigel Power Meters WPM 770 have been designed to display the electrical parameters in low

More information

EX-RC1 Remote I/O Adapter

EX-RC1 Remote I/O Adapter EX-RC1 Remote I/O Adapter The EX-RC1 interfaces between Unitronics Vision OPLCs and remote I/O Expansion Modules distributed throughout your system. The adapter is connected to a PLC via CANbus. Each adapter

More information

Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide

Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide Warnings and legal information Installation and terminals Communication I/O options Alarming Utility software More information Specifications

More information

with Backlight Graphic LCD Screen

with Backlight Graphic LCD Screen with Backlight Graphic LCD Screen ENERGY AND AUTOMATION POWER OF ENERGY SAVING For the control of energy distribution systems detecting when problems occur that could put the quality and availability of

More information

COMTRAXX COM460IP. BMS-Ethernet-Gateway

COMTRAXX COM460IP. BMS-Ethernet-Gateway COMTRAXX COM460IP BMS-Ethernet-Gateway COM460IP_D00023_03_D_XXEN/11.2015 COMTRAXX COM460IP BMS-Ethernet-Gateway COM460IP Device features Modular, expandable gateway between BMS bus and TCP/IP Gateway between

More information

2 Device description. 2 Device description 2.1 Function. 2.1 Function. 2.2 Intended use. 2.3 Device versions

2 Device description. 2 Device description 2.1 Function. 2.1 Function. 2.2 Intended use. 2.3 Device versions 2 Device description 2.1 Function 2 Device description 2.1 Function MICRO PANELs can be used as HMI devices or as integrated HMI/PLC devices. 2.2 Intended use MICRO PANELs are primarily used in machine

More information

Weighing Electronics SIWAREX - PLC-based weighing electronics

Weighing Electronics SIWAREX - PLC-based weighing electronics Overview Design is a compact technology module in SIMATIC S7-100 and allows direct connection to S7-100 components via a sliding connector. The rail mounting of the 70 mm (.76 inch) wide weighing module

More information

System Overview Fuel/air ratio control system VMS. Sensors and systems for combustion engineering.

System Overview Fuel/air ratio control system VMS. Sensors and systems for combustion engineering. System Overview Fuel/air ratio control system VMS Sensors and systems for combustion engineering www.lamtec.de LAMTEC Fuel/air ratio control system VMS Approvals. EC Type Examination Certificate (Module

More information

RXM39.1. PL-Link IO Block. Desigo TRA. Use with PXC3 series room automation station

RXM39.1. PL-Link IO Block. Desigo TRA. Use with PXC3 series room automation station s 3 836 3836P01 Desigo TRA PL-Link IO Block Use with PXC3 series room automation station RXM39.1 The PL-Link IO Block contains the inputs and outputs controlled by a room automation station via PL-Link.

More information

ISOMETER isoev425 with coupling device AGH420

ISOMETER isoev425 with coupling device AGH420 with coupling device AGH420 Insulation monitoring device for unearthed DC circuits (IT systems) for charging electric vehicles Preliminary datasheet isoev425_d00126_02_d_xxde/09.2015 with coupling device

More information

USER MANUAL MULTI COLOR TOUCH SCREEN PAPERLESS RECORDER TPLR-96 Series

USER MANUAL MULTI COLOR TOUCH SCREEN PAPERLESS RECORDER TPLR-96 Series USER MANUAL MULTI COLOR TOUCH SCREEN PAPERLESS RECORDER TPLR-96 Series TEMPSEN DEVICES Plot No : 2&3, Balaji Nagar, 4 th Street, Mettukuppam, Thoraipakkam, Chennai-600097 Tele fax : +91-44-24581758,Mobil

More information

PAS 300, PROFIBUS Slave Interface Module

PAS 300, PROFIBUS Slave Interface Module Catalog 08 PROFIBUS-Components 27 PAS 300, PROFIBUS Slave Interface Module PROFIBUS PROFIBUS slave interfaces PROFIBUS slave module The PROFIBUS slave interface module PAS 300 from the Systeme Helmholz

More information

Neon pr. ph/ ORP measurement. Applications. Description

Neon pr. ph/ ORP measurement. Applications. Description Easy handling by graphical menue Fitting for your application by modular setup Simple firmware update and configuration using SD-card Applications Process Water Drinking Water / Beverages Waste Water Treatment

More information

Access Terminal IF-800

Access Terminal IF-800 95-10287 IF-800_1312_3 Access Terminal IF-800 1 Slave Terminal IF-800 Thank you for using a terminal of the series IF-800 for recording access data. Scope of Delivery: Slave terminal IF-800. I/O controller

More information

Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide

Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide Multi-instrument Communication, MIC-2 MKII DIN Quick Start Guide Warnings and legal information Installation and terminals Communication I/O options Alarming Utility software More information Specifications

More information

1/32-DIN TEMPERATURE CONTROLLER INSTALLATION, WIRING AND OPERATION MANUAL FORM 3882

1/32-DIN TEMPERATURE CONTROLLER INSTALLATION, WIRING AND OPERATION MANUAL FORM 3882 1/32-DIN TEMPERATURE CONTROLLER INSTALLATION, WIRING AND OPERATION MANUAL FORM 3882 This manual is intended for use in support of installation, commissioning and configuration of the 1/32-DIN Temperature

More information

R1M-GH THERMOCOUPLE & DC INPUT MODULE MODEL. Remote I/O R1M Series. (16 points)

R1M-GH THERMOCOUPLE & DC INPUT MODULE MODEL. Remote I/O R1M Series. (16 points) Remote I/O R1M Series THERMOCOUPLE & DC INPUT MODULE (16 points) MODEL MODEL & SUFFIX CODE SELECTION R1MGH2T MODEL Modbus protocol I/O TYPE GH2 : Thermocouple or DC input, 16 points FIELD TERMINAL TYPE

More information

USER MANUAL MULTI COLOR TOUCH SCREEN PAPERLESS RECORDER MODEL : ARC2020

USER MANUAL MULTI COLOR TOUCH SCREEN PAPERLESS RECORDER MODEL : ARC2020 USER MANUAL MULTI COLOR MODEL : ARC2020 ACCSYS ELECTRONICS 140/6B, GOLDEN INDUSTRIAL ESTATE, JAWAHARLAL NEHRU ROAD, GERUGAMBAKKAM, CHENNAI - 600122 Tel: 044 60505599 / 60505511 E-mail : sales@accsyselectronics.com

More information

- Ovens - Food processing - Dryers, etc.

- Ovens - Food processing - Dryers, etc. Built-In Temperature Controllers Single channel temperature controllers for use in: - Hot runner applications - Machines for plastics processing - Packaging machines - Ovens - Food processing - Dryers,

More information

MXIO. Compact I/O module. Summary. Application Compact I/O module for data acquisition and HVAC control systems. Function

MXIO. Compact I/O module. Summary. Application Compact I/O module for data acquisition and HVAC control systems. Function MXIO Compact I/O module Summary The MXIO multiple I/O compact module is a microprocessor-controlled, communicative module with the I/O mix optimized for larger HVAC control applications. The module uses

More information

Expansion Module HZS 541-1S

Expansion Module HZS 541-1S Expansion Module HZS 541-1S 12.10.2015 Page 1 System Description The external HZS 541-1S expansion module provides users of biomass heating systems with additional 230 V AC relay outputs, analog inputs

More information

Remote I/O Product Specification

Remote I/O Product Specification Table of Contents 1. Product Overview... 1 1.1 Product List:... 1 1.1.1 Coupler List:... 1 1.1.2 Digital I/O List:... 1 2. Fieldbus Coupler... 2 2.1 CANopen Specifications... 2 2.2 Ethernet TCP/IP Specifications...

More information

JUMO mtron T Measuring, Control, and Automation System

JUMO mtron T Measuring, Control, and Automation System Data Sheet 705001 Page 1/10 JUMO mtron T Measuring, Control, and Automation System Central processing unit Brief description The central processing unit is the heart of the system. It contains the process

More information

4 LOOP MODULAR POWER CONTROLLER

4 LOOP MODULAR POWER CONTROLLER GFX- LOOP MODULAR POWER CONTROLLER Main features independent loop control unit. Compact, ready to use, equipped also with fieldbus interface. Main application Packaging Extrusion Thermoforming Injection

More information

PU5 5-digit digital panel meter in 96x48 mm (BxH) Universal measuring inputs: Pt100, current, voltage, shunt, thermocouple, resistance

PU5 5-digit digital panel meter in 96x48 mm (BxH) Universal measuring inputs: Pt100, current, voltage, shunt, thermocouple, resistance PU5 5-digit digital panel meter in 96x48 mm (BxH) Universal measuring inputs: Pt100, current, voltage, shunt, thermocouple, resistance red display of -9999 99999 digits installation depth: 120 mm without

More information

Comprehensive Modular Genset Controller

Comprehensive Modular Genset Controller Inteligen Learn More Comprehensive Modular Genset Controller Brief Description The Inteligen is a comprehensive controller for single and multiple generating sets operating in standby or parallel to the

More information

Compact universal controllers

Compact universal controllers 7 867 Compact universal controllers RWF55... The RWF55 is used mainly for controlling the temperature or pressure in oil- or gas-fired heating plants. If the relevant parameters are set, the RWF55 can

More information

Electronic Temperature Controller. Instruction Manual Version

Electronic Temperature Controller. Instruction Manual Version Electronic Temperature Controller 701 Instruction Manual Version 1.00.01 Dear Customer, we have made up this operating manual in such a way that all necessary information about the product can be found

More information

EY-EM : Remote I/O module, ecolink

EY-EM : Remote I/O module, ecolink EY-EM 510...512: Remote I/O module, ecolink510...512 How energy efficiency is improved Optimum adjustment to applications by means of module technology. Reduction in wiring Features Part of the SAUTER

More information

DIGITAL INDICATING CONTROLLER

DIGITAL INDICATING CONTROLLER DB1000 SERIES DIGITAL INDICATING CONTROLLER The DB1000 series is a 96 96mm digital indicating controller with the indicating accuracy of ±0.1% and the control cycle of approximately 0.1 seconds. Various

More information

Note: the wiring of the dead-man buttons has been changed since October 2001.

Note: the wiring of the dead-man buttons has been changed since October 2001. UniOP epalm10 The epalm10 is a state-of-the-art handheld HMI device with a graphic display and a keypad. The rugged polyamide enclosure offers a high level of shock and environmental resistance making

More information

Remote I/O Product Specification

Remote I/O Product Specification Table of Contents 1. Product Overview... 1 1.1 Product List:... 1 1.1.1 Coupler List:... 1 1.1.2 Digital I/O List:... 1 2. Fieldbus Coupler... 2 2.1 CANopen Specifications... 2 2.2 Ethernet TCP/IP Specifications...

More information

COMTRAXX COM465IP. Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks

COMTRAXX COM465IP. Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks Condition Monitor with integrated gateway for the connection of Bender devices to Ethernet TCP/IP networks COM465IP_D00217_04_D_XXEN/11.2018 Condition Monitor with integrated gateway for the connection

More information

KS 108 easy Compact automation unit for industrial control and process technology

KS 108 easy Compact automation unit for industrial control and process technology PMA KS 108 easy Compact automation unit for industrial control and process technology Combines control, sequencing, profiler and operation Comprehensive function library with integrated operator dialogs

More information

CU USB-Extender-Rx (USB and DVI Extender) Version: 0.3 Date:

CU USB-Extender-Rx (USB and DVI Extender) Version: 0.3 Date: CU8860-0000 USB-Extender-Rx (USB and DVI Extender) Version: 0.3 Date: 2006-02-20 Table of Contents Table of Contents 1 Foreword 1 1.1 Notes on the documentation 1 1.1.1 Liability Conditions 1 1.1.2 Conditions

More information

Fieldgate SFG500. Technical Information. Intelligent Ethernet/PROFIBUS gateway

Fieldgate SFG500. Technical Information. Intelligent Ethernet/PROFIBUS gateway Technical Information Fieldgate Intelligent Ethernet/PROFIBUS gateway Application Fieldgate is a system component that provides an independent access route to a PROFIBUS network. It may be used in a variety

More information

Dupline. Data Logger. Types G , G Product Description. Ordering Key G Type Selection. Input/Output Specifications

Dupline. Data Logger. Types G , G Product Description. Ordering Key G Type Selection. Input/Output Specifications Dupline Data Logger Types G 800 006, G 800 106 Product Description Programmable channel generator with optional built-in GSM Modem Event and time based data logging functions for digital, analog and counter

More information

Data Sheet T 6493 EN. TROVIS 6400 Automation System TROVIS 6493 Compact Controller. For panel mounting (front frame 48 x 96 mm/1.89 x 3.

Data Sheet T 6493 EN. TROVIS 6400 Automation System TROVIS 6493 Compact Controller. For panel mounting (front frame 48 x 96 mm/1.89 x 3. Data Sheet T 6493 EN TROVIS 6400 Automation System TROVIS 6493 Compact Controller For panel mounting (front frame 48 x 96 mm/1.89 x 3.78 inch) Application Digital controller to automate industrial and

More information

XC-CPU-201 XC-CPU-201-XV

XC-CPU-201 XC-CPU-201-XV / XC-CPU- XC-CPU--XV Ethernet integrated The / MBit Ethernet interface of the XC offers the perfect link to IT communication. Whether you need rapid access to programs, high-speed data exchange between

More information

MCX08M2 Programmable controller

MCX08M2 Programmable controller Data sheet MCX08M2 Programmable controller MCX08M2 is an electronic controller that holds all the typical functionalities of MCX controllers in the compact size of 8 DIN modules: programmability connection

More information

KS 108 easy Compact automation unit for industrial control and process technology

KS 108 easy Compact automation unit for industrial control and process technology PMA KS 108 easy Compact automation unit for industrial control and process technology Combines control, sequencing, and operation Comprehensive function library with integrated operator dialogs BlueDesign

More information

COMTRAXX COM465DP. Condition Monitor with integrated gateway for the connection of Bender devices to PROFIBUS DP and Ethernet TCP/IP networks

COMTRAXX COM465DP. Condition Monitor with integrated gateway for the connection of Bender devices to PROFIBUS DP and Ethernet TCP/IP networks Condition Monitor with integrated gateway for the connection of Bender devices to PROFIBUS DP and Ethernet TCP/IP networks COM465DP_D00216_00_D_XXDE/10.2015 Condition Monitor with integrated gateway for

More information

ILBPB24DO32. Inline Block IO Module for PROFIBUS With 32 Digital Outputs. AUTOMATIONWORX Data Sheet 6889_en_04. Description

ILBPB24DO32. Inline Block IO Module for PROFIBUS With 32 Digital Outputs. AUTOMATIONWORX Data Sheet 6889_en_04. Description Inline Block IO Module for PROFIBUS With 32 Digital Outputs AUTOMATIONWORX Data Sheet 6889_en_04 Description PHOENIX CONTACT - 03/2007 & & ' ) The ILB PB 24 DO32 module is designed for use within a PROFIBUS

More information

digiclip Data sheet DF31DP Special features B en

digiclip Data sheet DF31DP Special features B en digiclip DF31DP Data sheet Special features Digital amplifier for industrial automation tasks and production process monitoring 600 Hz CF measurement technology with TEDS sensor detection for SG full bridges

More information

XPSMF35. Product data sheet Characteristics. Preventa safety PLC compact - Profibus DP protocol. Main. Complementary. Safety module name

XPSMF35. Product data sheet Characteristics. Preventa safety PLC compact - Profibus DP protocol. Main. Complementary. Safety module name Product data sheet Characteristics XPSMF3542 Preventa safety PLC compact - Profibus DP protocol Main Range of product Product or component type Safety module name Safety module application Nov 13, 2018

More information

Motor units MTR-DCI, intelligent servo motors

Motor units MTR-DCI, intelligent servo motors -U- Type discontinued Motor units MTR-DCI, intelligent servo motors Key features General information The motor unit MTR-DCI is an innovative motor with integrated power electronics for positioning tasks.

More information

INTEGRATED SYSTEMS AND CONTROL, INC. User s Hardware Manual. PCMNET V 7. xx

INTEGRATED SYSTEMS AND CONTROL, INC. User s Hardware Manual. PCMNET V 7. xx INTEGRATED SYSTEMS AND CONTROL, INC. User s Hardware Manual PCMNET V 7. xx INTEGRATED SYSTEMS AND CONTROLS, INC. PCMNET Users Manual Revised 2/4/2005 2003-2005 Integrated Systems and Control. Inc. PO Box

More information

BMS-Ethernet-Gateway COM460IP

BMS-Ethernet-Gateway COM460IP BMS-Ethernet-Gateway TDB501015en / 11.2012 BMS-Ethernet-Gateway BMS-Ethernet-Gateway Device features Modular, expandable gateway between BMS bus and TCP/IP Gateway between BMS bus and Ethernet Range of

More information

Small distributed I/O module

Small distributed I/O module MLIO Summary Application Function Small distributed I/O module Small I/O module MLIO is a microprocessor-controlled, communiccative module for installation outside the control panel. It is used for topologies

More information

Line A. Inverse parallel scrs. Load a FUSION. Line B SCR POWER. O delta CONTROLLERS. Line c. inverse parallel scrs. Load C. FUSION Brochure Rev 3.

Line A. Inverse parallel scrs. Load a FUSION. Line B SCR POWER. O delta CONTROLLERS. Line c. inverse parallel scrs. Load C. FUSION Brochure Rev 3. Line A Inverse parallel scrs Load a Line B FUSION SCR POWER O delta CONTROLLERS Line c inverse parallel scrs Load C FEATURES Auto-Ranging Input Voltage 24-600 VAC, 45-65 Hz AC or DC Output AC Models: 50-1200

More information

Multi-Channel SCR Power Controller Suitable to control Electric Heaters and IR Lamps in Industrial Heating Systems

Multi-Channel SCR Power Controller Suitable to control Electric Heaters and IR Lamps in Industrial Heating Systems Multi Channel Power Control Suitable to communicate with PLC & Multiloop Dedicated to solve applications Space & wiring reduction Most popular Field Bus available CE EMC and cul listed Elimination of power

More information

Operation Manual Profibus DP -Display HE 5120 P with digital I/O's

Operation Manual Profibus DP -Display HE 5120 P with digital I/O's Operation Manual Profibus DP -Display HE 510 P with digital I/O's "HESCH" Schröder GmbH Boschstraße 8 31535 Neustadt Telefon +49 (0) 503 / 9535-0 Telefax +49 (0) 503 / 9535-99 e-mail: info@hesch.de http://www.hesch.de

More information

JUMO TYA 201 Single-Phase SCR Power Controller For controlling resistive/inductive loads

JUMO TYA 201 Single-Phase SCR Power Controller For controlling resistive/inductive loads Data sheet 709061 Page 1/21 JUMO TYA 201 Single-Phase SCR Power Controller For controlling resistive/inductive loads The JUMO TYA 201 represents a consistent further development of the JUMO power controller

More information

Installation Manual. Multi Power Controller MPC-1 multi-line D

Installation Manual. Multi Power Controller MPC-1 multi-line D Installation Manual Multi Power Controller MPC-1 multi-line Complete control system in one package: - island operation - parallel with mains operation - emergency generator control 3-phase AC measurements

More information

Operating Manual UMB ISO Converter ISOCON Order Number: 8160.UISO

Operating Manual UMB ISO Converter ISOCON Order Number: 8160.UISO Order Number: 8160.UISO Status: V3; 17.09.2010c G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany 1 TABLE OF CONTENTS PLEASE READ BEFORE USE... 3 DESCRIPTION... 5 UMB ISO CONVERTER ISOCON... 6 CONFIGURATION...

More information

Vision570 TM /560 TM. Color OPLC TM. Color Vision570 TM /560 TM Series Featuring:

Vision570 TM /560 TM. Color OPLC TM. Color Vision570 TM /560 TM Series Featuring: Vision570 TM /560 TM Color OPLC TM Color Vision570 TM /560 TM Series Featuring: HMI Up to 1024 user-designed screens 500 images per application HMI graphs color-code Trends Built-in alarm screens Text

More information

Advant OCS. The Compact and Cost Effective Advant Controller. Advant Controller 210. Open Control System

Advant OCS. The Compact and Cost Effective Advant Controller. Advant Controller 210. Open Control System Advant OCS Open Control System Advant Controller 210 The Compact and Cost Effective Advant Controller Advant Controller 210 is a small, cost-effective system belonging to the Advant Controller family.

More information

Rotary Measuring Technology

Rotary Measuring Technology Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life

More information

UNT1100 Series. Binary Output Jumpers AO2 AO1 AO3 AO4 AOCM AOCM AOCM AOCM AO1. AI Switches Job Information N2 Address. Ref N2+ N2- ADDR 0 = ALL OPEN

UNT1100 Series. Binary Output Jumpers AO2 AO1 AO3 AO4 AOCM AOCM AOCM AOCM AO1. AI Switches Job Information N2 Address. Ref N2+ N2- ADDR 0 = ALL OPEN 1 2 8 4 AI6 R R Installation Bulletin UNT1100 Issue Date 0309 UNT1100 Series Introduction The Unitary (UNT) controller (UNT1100 Series) is a digital controller with applications for air handling units,

More information

FUSION COMPACT. Load a. Line A. Inverse parallel scrs. Line B. Line c. inverse parallel scrs. Load C SCR POWER. O delta CONTROLLERS

FUSION COMPACT. Load a. Line A. Inverse parallel scrs. Line B. Line c. inverse parallel scrs. Load C SCR POWER. O delta CONTROLLERS Line A Inverse parallel scrs Load a Line B COMPACT SCR POWER CONTROLLERS O delta Line c inverse parallel scrs Load C 1 Compact Brochure Rev 3.51 www.ccipower.com 1-800-765-2799 FEATURES Auto-Ranging Input

More information

1/2 Description XV400 Flexible in Application

1/2 Description XV400 Flexible in Application 1/2 Description XV400 Flexible in Application HMI or combined HMI-PLC with the XV400 series, the customer decides on the device functions and the preferred project engineering tool. Devices in the XV400

More information

In-Sight I/O. In-Sight expansion module (For use with in-sight 5000 series vision sensors and Id readers, and 3400 vision sensors)

In-Sight I/O. In-Sight expansion module (For use with in-sight 5000 series vision sensors and Id readers, and 3400 vision sensors) System DISTRIBUTEUR C ONSEIL DEPUIS 1 9 8 5 In-Sight i/o specifications In-Sight BREakout module (For use with in-sight 5000 series vision sensors and id readers) Note: All measurements are provided in

More information

High-powered control system for sophisticated processes

High-powered control system for sophisticated processes High-powered control system for sophisticated processes regulation control recording visualization easy to use freely configurable integrated PLC telemaintenance network-compatible Gigabit-Ethernet Compact

More information

JUMO Quantum PID100/PID200/PID300

JUMO Quantum PID100/PID200/PID300 Data sheet 702020 Page 1/12 JUMO Quantum PID100/PID200/PID300 Universal PID Controller Series Brief description The Quantum series is available in the three DIN formats 48 mm x 48 mm, 48 mm x 96 mm, and

More information

PCAN-Router FD Universal, programmable Converter for CAN FD and CAN. User Manual. Document version ( )

PCAN-Router FD Universal, programmable Converter for CAN FD and CAN. User Manual. Document version ( ) PCAN-Router FD Universal, programmable Converter for CAN FD and CAN User Manual Document version 1.0.1 (2017-01-27) Relevant products Product Name Model Part number PCAN-Router FD 2 D-Sub connectors IPEH-002214

More information

Visualisation. Controls. Industrial PC v800 Monitor v200 VisiWinNET

Visualisation. Controls. Industrial PC v800 Monitor v200 VisiWinNET Controls Visualisation Industrial PC v800 Monitor v200 VisiWinNET Phone: 80089012 - Fax: 888723773 - Web: wwwclrwtrcom - Email: info@clrwtrcom Contents General information Product key 31- Features 31-5

More information

AMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings

AMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen

More information

Digital electropneumatic Positioner for the integrated mounting on process control valves

Digital electropneumatic Positioner for the integrated mounting on process control valves Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up Comprehensive

More information

Smart Energy & Power Quality Solutions. ProData datalogger. Datalogger and Gateway

Smart Energy & Power Quality Solutions. ProData datalogger. Datalogger and Gateway Smart Energy & Power Quality Solutions ProData datalogger Datalogger and Gateway Smart and compact: Our most universal datalogger ever saves power costs Ethernet connection Modbus-Ethernet-Gateway 32 MB

More information

Touch Displays, Line COP 400

Touch Displays, Line COP 400 Touch s, Line COP 400 High-performance operator panels for integration into TCP/IP networks Intelligence that moves. Touch s, Line COP 400 2 Touch s, Line COP 400 Content The Touch Line COP 400... 2 Description

More information

4/0 EASY control relay

4/0 EASY control relay 4/0 DEL ALT ESC OK Contents 4/1 Page System overview 4/2 4/4 EASY800 networking 4/4 4/5 Basic units 4/5 Expansion units 4/9 Multi-function display 4/8 Display/operator unit 4/8 Power supply/cpu modules

More information

DTS 310. DIN Rail Mounted, Indoor Rated Revenue Grade Electrical Sub-meter. Page 1. Measurlogic MQ A

DTS 310. DIN Rail Mounted, Indoor Rated Revenue Grade Electrical Sub-meter. Page 1. Measurlogic MQ A DTS 310 DIN Rail Mounted, Indoor Rated Revenue Grade Electrical Sub-meter Page 1 1 PRODUCT OVERVIEW... 3 1.1 SUPPLIED ITEMS... 3 1.2 DOCUMENT CONVENTIONS... 4 1.3 PRODUCT SPECIFICATION... 4 1.3.1 Current

More information

Intech Micro 2300-RTD6 analogue input station MODBUS RTU slave application supplementary manual.

Intech Micro 2300-RTD6 analogue input station MODBUS RTU slave application supplementary manual. Intech Micro 2300-RTD6 analogue input station MODBUS RTU slave application supplementary manual. MODBUS supplementary manual to the 2300-RTD6 Installation Guide. The 2300 series stations are designed to

More information

ETHERNET/MFC 010 Technical Datasheet

ETHERNET/MFC 010 Technical Datasheet ETHERNET/MFC 010 Technical Datasheet EtherNet/IP interface box in combination with MFC 010 Seamless integration into EtherNet/IP environments Integrated web server for easy configuration, maintenance and

More information

Universal Motor Controller UMC22-FBP. Excellent motor protection and control ATEX ABB

Universal Motor Controller UMC22-FBP. Excellent motor protection and control ATEX ABB Universal Motor Controller UMC-FBP Excellent motor protection and control ATEX ABB FieldBusPlug: the concept ABB s communicative product family comprises a wide range of switching, controlling and automation

More information