OTPC 150/225/260 Amp Transfer Switch

Size: px
Start display at page:

Download "OTPC 150/225/260 Amp Transfer Switch"

Transcription

1 OTPC 50/5/60 Amp Transfer Switch Printed in U.S.A. 6 08B (Spec A) 5-00

2 This catalog covers models produced under the Cummins /Onan and Cummins Power Generation brand names. To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Cummins Power Generation nameplate. For handy reference, insert your nameplate information in the spaces below. MODEL AND SPEC NO. SERIAL NO. DIGITAL CONTROL SOFTWARE VERSION AND DATE (IF APPLICABLE) The following symbols are used in Cummins Power Generation manuals to alert users to the potentially dangerous conditions relating to maintenance of equipment and replacement of parts. Please read and observe. This symbol warns of immediate hazards which will result in severe personal injury or death. This symbol refers to a hazard or unsafe practice which can result in severe personal injury or death. This symbol refers to a hazard or unsafe practice which can result in severe personal injury or product or property damage. Service and repair of Cummins Power Generation equipment must be performed by trained, experienced personnel only. Improper service or repair may result in property damage, severe personal injury or death. Do not use this catalog as a guide to servicing your equipment. Read and follow the IMPORTANT SAFETY INSTRUCTIONS in the Service Manual appropriate for the equipment you are working on. Contact with USED ENGINE OILS has been identified by a United States federal agency and some USA state agencies as causing CANCER or REPRODUCTIVE TOXICITY. When checking or changing engine oils take all necessary precautions not to ingest, breathe the fumes or contact the used oil. Contact with ASBESTOS has been identified by a United States federal agency and some USA state agencies as causing CANCER or REPRODUCTIVE TOXICITY. When handling engine gaskets take all necessary precautions not to ingest, breathe or contact the dust from the gaskets! Use adequate ventilation and wear protective gloves, masks and clothing! Contact with BENZINE and LEAD, found in gasoline, fuel additives and solvents has been identified by a United States federal agency and some USA state agencies as causing CANCER or REPRODUCTIVE TOXICITY. When checking, draining or adding gasoline and fuel additives or using solvents take all necessary precautions not to ingest, breathe the fumes or contact the liquids. Use adequate ventilation and wear protective gloves, masks and protective clothing! PSP-

3 Introduction This catalog applies to the Cummins Power Generation OTPC 50/5/60 Amp Transfer Switch. Each illustrated part is identified by a reference number corresponding to the same reference number in the parts list for that group. Parts illustrations are typical. Using the model and spec number from the switch box nameplate, select the parts that apply to your Transfer Switch. Unless otherwise noted in the parts description, parts are interchangeable between models. Feature Options Code Description Code Description A08 -Pole Switch L0 Auxiliary Relay Emergency Position VDC A0 -Pole Switch L0 Auxiliary Relay Normal Position VDC A05 Utility to Generator Set Applications L0 Auxiliary Relay Generator Start VDC A06 Utility to Utility Applications M00 Terminal Block 0 Points A0 Generator Set to Generator Set Applications M00 Load Shed From Emergency A0 One Phase or wire M0 Security Front Panel A0 Three Phase or wire M08 Display Digital A0 Frequency 60 Hz M00 Communications Lonworks A05 Frequency 50 Hz M0 Monitoring Load A06 Listing UL M0 Module Relay Signal A06 Listing UL/NFPA 0 N00 Bus Stubs Connection B00 Cabinet Type N0 Harness Extension B00 Cabinet Type R R00 Voltage 0 B00 Cabinet Type R0 Voltage 08 B00 Construction Open R0 Voltage 0 B00 Cabinet Type R0 Voltage 0 C0 Control Level R0 Voltage 80 C0 Control Level R05 Voltage 6 D00 Meters Bar Graph Display R06 Voltage 80 K00 Battery Charger Amp, /V R0 Voltage 600 K00 Battery Charger 0 Amp, V R05 Voltage 0 K00 Battery Charger 0 Amp, V R08 Voltage 0 L0 Auxiliary Relay VDC Coil S0 Current Rating 50 Amps L0 Auxiliary Relay Emergency Position VDC S050 Current Rating 5 Amps L0 Auxiliary Relay Normal Position VDC S05 Current Rating 60 Amps L0 Auxiliary Relay Generator Start VDC L0 Auxiliary Relay VDC Coil Copyright 00 Cummins Power Generation. All rights reserved.

4 Index Actuator, Linear Transfer Switch, Alarm, Battery Charger, Ammeter DC 0 Amp, Volt Battery Charger, 5 Ammeter DC 0 Amp, Volt Battery Charger, Ammeter DC Amp, / Volt Battery Charger, Arm, Interlock Transfer Switch, Bar, Interlock Transfer Switch, Bar, Neutral Transfer Switch, Barrier Transfer Switch, Barrier, Base Transfer Switch, Base, Mounting Transfer Switch, Block and Contact Assembly Transfer Switch, Block and Cross Bar Assembly Transfer Switch, Block, Hinge Type Cabinet, Block, Lug Mounting Transfer Switch, Block, Terminal, 0 Block, Terminal Battery Charger Alarm, Block, Terminal Network Module, 8 Block, Terminal Transfer Switch, Board, Printed Circuit 0 Amp, Volt Battery Charger, 5 Board, Printed Circuit 0 Amp, Volt Battery Charger, Board, Printed Circuit Amp, / Volt Battery Charger, Board, Printed Circuit Bar Graph Type Cabinet, Board, Printed Circuit Bar Graph Type R and Cabinet, 5 Board, Printed Circuit Bar Graph Type Cabinet, Board, Printed Circuit Current Transformer Module, Board, Printed Circuit Digital Type Cabinet, Board, Printed Circuit Digital Type R and Cabinet, 5 Board, Printed Circuit Digital Type Cabinet, Board, Printed Circuit Network Module, 8 Board, Printed Circuit Power Module Type Cabinet, Board, Printed Circuit Power Module Type R and Cabinet, 5 Board, Printed Circuit Power Module Type Cabinet, Board, Printed Circuit Relay Module, Bracket, Connector Accessory Control Plate (600 Volt), Bracket, Connector Accessory Control Plate (Less than 600 Volt), 8 Bracket, Door Type Cabinet, Bracket, End Auxiliary Relay, Bracket, End Terminal Battery Charger Alarm, Bracket, End Terminal Network Module, 8 Bracket, Terminal Transfer Switch, Breaker, Circuit Transfer Switch, Bus, Emergency Transfer Switch, Bus, Load Transfer Switch, Bus, Normal Transfer Switch, Cabinet Type, Cabinet Type, 5 Cabinet Type R, 5 Cabinet Type, Capacitor Transfer Switch, Charger, Battery 0 Amp, Volt, 5 Charger, Battery 0 Amp, Volt, Charger, Battery Amp, / Volt, Chute, Arc Transfer Switch, Cover, Arc Chute Transfer Switch, Cover, Charger 0 Amp, Volt Battery Charger, 5 Cover, Charger 0 Amp, Volt Battery Charger, Cover, Charger Amp, / Volt Battery Charger, Cover, Labeled Transfer Switch, Cover, Printed Circuit Board Type Cabinet, Cover, Printed Circuit Board Type R and Cabinet, 5 Cover, Printed Circuit Board Type Cabinet, Cover, Relay Plate Accessory Control Plate (600 Volt), Cover, Relay Plate Accessory Control Plate (Less than 600 Volt), 8 Door, Cabinet Type, Door, Cabinet Type R and Cabinet, 5 Door, Cabinet Type Cabinet, Fuse 0 Amp, Volt Battery Charger, 5 Fuse 0 Amp, Volt Battery Charger, Fuse Amp, / Volt Battery Charger, Gasket, Door Type R and Cabinet, 5 Gasket, Door Type Cabinet, Handle Assembly, Actuator, 0 Handle, Door Type R and Cabinet, 5 Handle, Locking Type Cabinet, Harness, Wiring 0 Amp, Volt Battery Charger, 5 Harness, Wiring 0 Amp, Volt Battery Charger, Harness, Wiring Amp, / Volt Battery Charger, Harness, Wiring Battery Charger, Harness, Wiring Battery Charger Alarm, Harness, Wiring Control Open Construction, 0 Harness, Wiring Current Transformer Module, Harness, Wiring Load Shed, Harness, Wiring Main Type Cabinet, Harness, Wiring Main Type R and Cabinet, 5 Harness, Wiring Main Type Cabinet, Harness, Wiring Network Module, 8 Holder, Fuse 0 Amp, Volt Battery Charger, 5 Holder, Fuse 0 Amp, Volt Battery Charger, Holder, Fuse Amp, / Volt Battery Charger, Insulator, Arc Chute Transfer Switch, Latch, Cam Type Cabinet, Latch, Cam Type R and Cabinet, 5 Lead Type Cabinet, Lead Type R and Cabinet, 5 Lead Type Cabinet, Load Shed, Lug, Solderless Transfer Switch, Lug, Solderless Type Cabinet, Lug, Solderless Type R and Cabinet, 5 Lug, Solderless Type Cabinet, Membrane, Panel Type Cabinet, Membrane, Panel Type R and Cabinet, 5 Membrane, Panel Type Cabinet, Module, Current Transformer, Module, Digital Display Type Cabinet, Module, Digital Display Type R and Cabinet, 5 Module, Digital Display Type Cabinet, Module, Network, 8

5 Index Plate, Accessory Control (600 Volt), Plate, Accessory Control (Less than 600 Volt), 8 Plate, End Terminal Battery Charger Alarm, Plate, End Terminal Network Module, 8 Plate, Handle Mounting Transfer Switch, Plate, Mounting Battery Charger Alarm, Plate, Mounting Current Transformer Module, Plate, Mounting Load Shed, Plate, Open Construction, 0 Plate, Relay Accessory Control Plate (600 Volt), Plate, Relay Accessory Control Plate (Less than 600 Volt), 8 Rail, Terminal Auxiliary Relay, Rail, Terminal Block Battery Charger Alarm, Rail, Terminal Block Network Module, 8 Rectifier, Bridge 0 Amp, Volt Battery Charger, 5 Rectifier, Bridge 0 Amp, Volt Battery Charger, Rectifier, Gate 0 Amp, Volt Battery Charger, 5 Rectifier, Gate 0 Amp, Volt Battery Charger, Relay Accessory Control Plate (600 Volt), Relay Accessory Control Plate (Less than 600 Volt), 8 Relay Load Shed, Relay, Auxiliary, Relay, Control Accessory Control Plate (600 Volt), Relay, Control Auxiliary Relay, Resistor, Fixed Amp, / Volt Battery Charger, Rod, Actuator Transfer Switch, Rod, Roller Type Cabinet, Rod, Roller Type R and Cabinet, 5 Rod End, Actuator Transfer Switch, Spacer, Actuator Transfer Switch, Spacer, Mounting Block Transfer Switch, Spring, Conical Type Cabinet, Standoff, Insulator Transfer Switch, Strap, Jumper Transfer Switch, Strap, Load Transfer Switch, Strip, Marker Transfer Switch, Support, Channel Transfer Switch, Switch Assembly, Auxiliary, Switch, Selector Security, Switch, Toggle Accessory Control Plate (600 Volt), Switch, Toggle Accessory Control Plate (Less than 600 Volt), 8 Transfer Switch Assembly, Transformer 0 Amp, Volt Battery Charger, 5 Transformer 0 Amp, Volt Battery Charger, Transformer Amp, / Volt Battery Charger, Transformer, Current, Transformer, Power Type Cabinet, Transformer, Power Type R and Cabinet, 5 Transformer, Power Type Cabinet, Wrapper, Charger Amp, / Volt Battery Charger, Wrapper, Charger 0 Amp, Volt Battery Charger, 5 Wrapper, Charger 0 Amp, Volt Battery Charger,

6 Abbreviations Some of the following abbreviations may be used throughout this Parts Catalog: AC Amp A/R AVR AWG CSA DC Deg. EFC EIT EPROM ET GFI ID IEC IT kw LPG LT M(meter number) Alternating Current Ampere As Required Automatic Voltage Regulator American Wire Gauge Canadian Standard Association Direct Current Degree Electronic Fuel Control External/Internal Tooth Erasable Programmable Read Only Memory External Tooth Ground Fault Interrupter Inside Diameter International Electrotechnical Commission Internal Tooth Kilowatt Liquid Petroleum Gas Left Meter MCM mm MOH NFS NPT OD oz. PCB Ph PMG PT/CT RFI RT Spec Thk UL UNC UNF VAC VDC W/(ET, IT, EIT) Metric Circular Mils Millimeter Mobile Off Highway Not For Sale National Pipe Thread Outside Diameter Ounce Printed Circuit Board Phase Permanent Magnet Generator Potential Transformer/ Current Transformer Radio Frequency Interference Right Specification Thick Underwriters Laboratories Inc. Union National Coarse Union National Fine Volts Alternating Current Volts Direct Current With

7 5

8 6 Transfer Switch

9 Transfer Switch Transfer Switch Assembly -Pole, Front Connect with Mechanical Lugs 50 Amp VAC VAC /0/0/600* VAC /6 VAC /80 VAC 5 Amp VAC VAC /0/0/600* VAC /6 VAC /80 VAC 60 Amp VAC VAC /0/0/600* VAC /6 VAC /80 VAC -Pole, Front Connect with Mechanical Lugs 50 Amp VAC /0/0/600* VAC /6 VAC /80 VAC 5 Amp VAC /0/0/600* VAC /6 VAC /80 VAC 60 Amp VAC /0/0/600* VAC /6 VAC /80 VAC -Pole, Rear Connect with Bus Stubs 50 Amp VAC VAC /0/0/600* VAC /6 VAC /80 VAC 5 Amp VAC VAC /0/0/600* VAC /6 VAC /80 VAC 60 Amp VAC VAC /0/0/600* VAC /6 VAC /80 VAC -Pole, Rear Connect with Bus Stubs 50 Amp VAC /0/0/600* VAC /6 VAC /80 VAC 5 Amp VAC /0/0/600* VAC /6 VAC /80 VAC 60 Amp VAC /0/0/600* VAC /6 VAC /80 VAC 06 5 Base, Mounting 06 6 Cover, Labeled Nut, Self-Locking (#0 ) Screw, Hex Head Slotted W/IT (#0 x.50) Washer, Flat (#0) Barrier 06 8 Spacer, Actuator Screw, Cap Hex Head (/ 0 x.50) Washer, Lock (/) Washer, Flat (/) 06 Rod, Actuator Screw, Cap Hex Head (5/6 8 x.88) Pole, Front Connect Pole, Front Connect Pole, Rear Connect Pole, Rear Connect Rod-End, Actuator Screw, Cap Hex Head (/ 0 x.5) 5 Washer, Spring Conical (5/6) Pole, Front Connect Pole, Front Connect Pole, Rear Connect Pole, Rear Connect Screw, Round Head Cross Recessed (#6 x.5) 8 Block, Terminal Screw, Hex Head (/ 0 x.50) Screw, Flat Head Cross Recessed (#0 x.50) Nut, Hex W/ET (#0 ) 06 8 Bracket, Terminal 6 80 Lead (80/6/0/80 VAC) 605 Jumper, Terminal Nut, Lock (/8 6) * Switch is actually 08 volts A large transformer in the system reduces the 600 volt system voltage down to 08 volts. Continued...

10 8 Transfer Switch

11 Transfer Switch Continued Strip, Marker Barrier, Base 06 Switch Assembly, Auxiliary (See Separate Page For Components) 8 Screw, Self-Locking Hex Head Thread Forming W/IT (/ 0 x.5) Pole, Front Connect Pole, Front Connect Pole, Rear Connect Pole, Rear Connect Block and Cross Bar Assembly Emergency Pole Pole 0 Strap, Jumper 65 -Pole, Front Connect 65 -Pole, Front Connect and -Pole, Rear Connect Screw, Cap Hex Head (5/6 x.5) Pole, Front Connect Pole, Front Connect Nut, Hex (/ 0) Pole, Rear Connect Pole, Rear Connect Nut, Hex (5/6 8) Pole, Front Connect Pole, Front Connect 06 8 Bar, Interlock Arm, Interlock Screw, Cross-Recessed Round Head W/IT (#8 x.50) Lug, Solderless 08 50/5 Amp Front Connect 0 60 Amp Front Connect 8 Block and Cross Bar Assembly Normal Pole Pole 06 6 Plate, Handle Mounting Handle, Actuator (See Separate Page For Components) Washer, Flat (5/6) -Pole, Front Connect Washer, Lock W/ET (5/6) -Pole, Front Connect 05 Standoff, Insulator -Pole, Front Connect 0 0 Strap, Load Front Connect Strap, Load Front Connect Strap, Load Front Connect 8 Harness, Wiring 8 66 Bar, Neutral (-Pole, Front Connect) 5 Clamp, Cable 50 Actuator, Linear VAC VAC /0/0/600* VAC /6 VAC /80 VAC 5 Breaker, Circuit VAC /08/0/0/600* VAC /6/0/80 VAC 5 Capacitor 00 0 VAC 00 0/08/0/0/600* VAC 00 80/6/0/80 VAC 5 Screw, Cap Hex Head (5/6 8 x.00) Pole, Front Connect Pole, Rear Connect Chute, Arc -Pole Screw, Pan Head Thread Cutting (#0 x.50) -Pole Cover, Arc Chute -Pole Insulator, Arc Chute -Pole Spacer, Mounting Block -Pole Block and Contact Assembly -Pole Support, Channel Rear Connect 6 Bus, Load 0 -Pole, Rear Connect 0 -Pole, Rear Connect 6 Bus, Normal and Emergency 0 6 -Pole, Rear Connect 0 8 -Pole, Rear Connect 6 Screw, Cap Hex Head (/ 0 x.00) Pole, Rear Connect Pole, Rear Connect 6 Washer, Spring Conical (/) Pole, Rear Connect Pole, Rear Connect 65 Screw, Hex Washer Head Thread Forming (/ 0) Pole, Rear Connect Pole, Rear Connect 06 5 Block, Lug Mounting Front Connect (Not Illustrated) Screw, Machine Round Head (/ 0 x.5) (Not Illustrated) Pole, Front Connect Pole, Front Connect Pole, Rear Connect Screw, Thread Forming (/ 0 x.50) -Pole, Front Connect (Not Illustrated) Screw, Thread Forming (/ 0 x.6) -Pole, Front Connect (Not Illustrated) * Switch is actually 08 volts A large transformer in the system reduces the 600 volt system voltage down to 08 volts.

12 Actuator Handle Assembly Handle Assembly, Actuator 06 8 Handle, Switch Left Hand 06 8 Handle, Switch Right Hand 85 0 Screw, Machine Round Head Cross Recessed (#8 x -/) 85 0 Screw, Machine Round Head Cross Recessed (#0 x -/) Nut, Self-Locking (#8 ) Nut, Self-Locking (#0 ) 0

13 Auxiliary Switch Assembly 5 06 Switch Assembly, Auxiliary 06 0 Bracket, Switch Auxiliary 06 5 Barrier, Switch Screw, Cap Hex Head (#6 x -/) Nut, Lock (#6 ) Switch, Snap-Action

14 Cabinet Type

15 Cabinet Type Door, Cabinet /5 Amp Amp Cabinet /5 Amp Amp Harness, Main Level Control All Except 600 VAC VAC Level Control All Except 600 VAC VAC Generator to Generator Applications All Except 600 VAC VAC Module, Digital Display 5 Board, Printed Circuit Power Module Level Control VAC /0/0/0/80 VAC VAC /80/6 VAC Level Control VAC /0/0/0/80 VAC VAC /80/6 VAC Board, Printed Circuit Bar Graph Screw, Pan Head (M x 8) Transformer, Power (600 VAC Only) Screw, Hex Washer Head Thread Forming (/ 0 x.50) Edge, Protection Washer, Lock W/ET (M5) /5 Amp Amp Screw, Cap Hex Head (M5 x 8) /5 Amp Amp 80 6 Standoff, Male Snap 06 5 Cover, Printed Circuit Board 5 Membrane, Panel Level Control Without Digital Display With Digital Display Level Control Without Meters Bar Graph Display 00 5 With Meters Bar Graph Display 6 6 Lug, Solderless (/ ) Edge, Protection 8 Block, Hinge /5 Amp Amp 5 05 Plug, Hole Handle, Locking (Includes Hardware and Keys) Latch, Cam /5 Amp ( Point) Amp ( Point) 5 0 Plug, Hole 06 Rod, Roller (60 Amp) 80 0 Nut, Self-Locking (/ 0) Screw, Cap Hex Head (/ 0 x.50) 6 Lead (Quantity Used as Required) Board, Printed Circuit Digital Level Control Level Control Guide, Rod (60 Amp)

16 Cabinet Type R and

17 Cabinet Type R and Door, Cabinet /5 Amp Amp Cabinet Type R Cabinet /5 Amp Amp Type Cabinet /5 Amp Amp Harness, Main Level Control All Except 600 VAC VAC Level Control All Except 600 VAC VAC Generator to Generator Applications All Except 600 VAC VAC Module, Digital Display 5 Board, Printed Circuit Power Module Level Control VAC /0/0/0/80 VAC VAC /80/6 VAC Level Control VAC /0/0/0/80 VAC VAC /80/6 VAC Board, Printed Circuit Bar Graph Screw, Pan Head (M x 8) Transformer, Power (600 VAC Only) Nut, Hex W/ET (0 ) Standoff, Male Snap 06 5 Cover, Printed Circuit Board Membrane, Panel Level Control 00 5 Without Digital Display 00 5 With Digital Display Level Control 00 5 Without Meters Bar Graph Display 00 5 With Meters Bar Graph Display 6 Lug, Solderless (/ ) Plug, Hole Handle, Door (Includes Key) Key, Replacement Latch, Cam ( Point) 8 Rod, Roller /5 Amp Amp Nut, Self-Locking (/ 0) 0 Lead (Quantity Used as Required) Board, Printed Circuit Digital Level Control Level Control Washer, Rubber Gasket, Door /5 Amp Amp Gasket, Door /5 Amp Amp Guide, Rod 5

18 Cabinet Type

19 Cabinet Type Door, Cabinet /5 Amp Amp Cabinet /5 Amp Amp Harness, Main Level Control All Except 600 VAC VAC Level Control All Except 600 VAC VAC Generator to Generator Applications All Except 600 VAC VAC Module, Digital Display 5 Board, Printed Circuit Power Module Level Control VAC /0/0/0/80 VAC VAC /80/6 VAC Level Control VAC /0/0/0/80 VAC VAC /80/6 VAC Board, Printed Circuit Bar Graph Screw, Pan Head (M x 8) Transformer, Power (600 VAC Only) Nut, Hex W/ET (0 ) Standoff, Male Snap 06 5 Cover, Printed Circuit Board Membrane, Panel Level Control 00 5 Without Digital Display 00 5 With Digital Display Level Control 00 5 Without Meters Bar Graph Display 00 5 With Meters Bar Graph Display 6 Lug, Solderless (/ ) Plug, Hole Nut, Self-Locking (/ 0) 6 Lead (Quantity Used as Required) Board, Printed Circuit Digital Level Control Level Control Washer, Rubber Gasket, Door /5 Amp Amp 0 Gasket, Door /5 Amp Amp 8 0 Screw, Round Head (5/6 8 x.5) Washer, Flat (5/6) 0 6 Bracket, Door Spring, Conical

20 Accessory Control Plate (Less than 600 Volt) CP0 0 0 Plate, Relay 0 Bracket, Connector 0 Relay PDT Switch, Toggle Screw, Phillips/Hex Head GND (M x 0) Screw, Pan Head Crossed Recessed (M x 8) Screw, Pan Head Crossed Recessed (M x ) 8 0 Cover, Relay Plate 8

21 Accessory Control Plate (600 Volt) R0 0 0 Plate, Relay 0 Bracket, Connector 0 Relay PDT Switch, Toggle Screw, Phillips/Hex Head GND (M x 0) Screw, Pan Head Crossed Recessed (M x 8) Screw, Pan Head Crossed Recessed (M x ) 8 0 Cover, Relay Plate 0 Relay, Control Screw, Pan Head Cross Recessed (M x )

22 Plate and Wiring Harness (Open Construction) B00, N0 0 0 Plate, Open Construction Plug, Hole Harness, Control (Optional) 8 With Pin Connector (Includes Parts Marked *) 8 0 With 5 Pin Connector (Includes Parts Marked #) * Plug, Connector ( Pin) (P) 5 5 * Cap, Connector ( Pin) (J) 6 *# Socket, Contact 00 8 Wiring Harness Wiring Harness *# Pin, Contact 8 Wiring Harness Wiring Harness 8 5 # Plug, Connector (5 Pin) (P) 5 # Cap, Connector (5 Pin) (J) * Parts Included in 8 Wiring Harness # Parts Included in 8 0 Wiring Harness 0

23 Wiring Harness Battery Charger (Generator Set to Generator Set) A0 8 0 Rail, Terminal Plate, Mounting 0 8 Relay, Control ( VDC) 88 Bracket, End Screw, Phillips/Hex Head GND (M x 0) 6 0 Mount, Cable Tie 80 0 Nut, Self-Locking (/ 0) Screw, Cap Hex Head (/ 0 x.5) 8 86 Harness, Battery Charger (Includes Parts Marked *) 0 00 * Socket, Contact 606 * Socket, Contact * Pin, Contact 0 * Pin, Contact * Parts Included in 8 86 Wiring Harness

24 Battery Charger Alarm N Rail, Terminal Block Plate, Mounting 86 0 Block, Terminal (Sectional) 8 Bracket, End Terminal 5 8 Plate, End Terminal Screw, Phillips/Hex Head GND (M x 0) 0 Mount, Cable Tie Nut, Self-Locking (/ 0) Screw, Cap Hex Head (/ 0 x.5) Harness, Alarm (Includes Parts Marked *) 0 * Pin, Contact (J) 0 * Housing, Connector (0 Pin) (J) * Parts Included in 8 Wiring Harness

25 Battery Charger Amp, / Volt Wrapper, Charger Battery 0 Cover, Charger Battery Ammeter, DC Screw, Machine Locking Head Slotted (#0 x 5/6) 5 05 Holder, Fuse 6 05 Fuse, Amp 00 6 Board, Printed Circuit 8 Transformer Volt /0/80 Volt /6 Volt Volt 0 00 Resistor, Fixed Resistor, Fixed Washer, Centering (/ ) 8 06 Screw, Machine Round Head (#0 x 6-/) 8 0 Screw, Machine Round Head (#0 x -/) 80 0 Nut, Hex W/ET (#0 ) Screw, Pan Head W/ET (#6 x /8) 6 8 Harness, Wiring (Includes Parts Marked #) 8 *Cap, 6 pin (J6) 8 *Plug, pin (P) A/R *Pin, Terminal 0 00 A/R *Socket, Terminal Nut, Hex W/ET (M5) * Parts Included in 8 Wiring Harness

26 Battery Charger 0 Amp, Volt

27 Battery Charger 0 Amp, Volt 00 Wrapper, Charger Battery 00 Cover, Charger Battery 0 8 Ammeter, DC 0 Holder, Fuse (AC Input) 5 00 Holder, Fuse (DC Output) 6 Fuse 50 Hertz /0 Volt Volt Volt Volt 60 Hertz Volt Volt Volt Volt Volt Volt 0 Fuse (5 Amp) 8 Transformer 50 Hertz Volt /6/0 Volt Volt 60 Hertz /08/0 Volt Volt Volt Volt PCB, Charger Battery Rectifier, Bridge Screw, Machine Locking Head (#0 x 5/6) Screw, Pan Head W/ET (#6 x /8) Rectifier Assembly SCR ( Volt) (Includes Parts Marked *) Screw, Pan Head W/ET (#8 x 5/8) Nut, Hex W/ET (#8 ) *Nut, Insulated (#8) 8 Harness, Battery Charger (Includes Parts Marked #) 8 00 A/R #Socket, Terminal 0 A/R #Pin, Terminal 0 8 #Cap, 6 pin 05 #Plug, 5 pin *Rectifier, Gate (SCR) *Screw, Sheet Metal Round Head (#8 x /) Lead (Quantity Used as Required) Nut, Hex W/ET (M5) # Parts Included in 8 Wiring Harness * Parts Included in Rectifier Assembly 5

28 Battery Charger 0 Amp, Volt

29 Battery Charger 0 Amp, Volt 00 Wrapper, Charger Battery 00 Cover, Charger Battery (Includes Silkscreen) 0 8 Ammeter, DC 0 Holder, Fuse (AC Input) 5 00 Holder, Fuse (DC Output) 6 Fuse 50 Hertz /6/0 Volt Volt Volt 60 Hertz Volt Volt Volt Volt /08 Volt 0 Fuse (5 Amp) 8 Transformer 50 Hertz /6/0 Volt Volt Volt 60 Hertz /08/0 Volt Volt Volt Volt 00 PCB, Charger Battery Rectifier, Bridge Screw, Machine Locking Head (#0 x 5/6) Screw, Pan Head W/ET (#6 x /8) Rectifier Assembly SCR ( Volt) (Includes Parts Marked *) Screw, Pan Head W/ET (#8 x 5/8) Nut, Hex W/ET (#8 ) *Nut, Insulated (#8) 8 Harness, Battery Charger (Includes Parts Marked #) 8 00 A/R #Socket, Terminal 0 A/R #Pin, Terminal 0 8 #Cap, 6 pin 05 #Plug, 5 pin *Rectifier, Gate (SCR) *Screw, Sheet Metal Round Head (#8 x /) Lead (Quantity Used as Required) Nut, Hex W/ET (M5) # Parts Included in 8 Wiring Harness * Parts Included in Rectifier Assembly

30 Network Module M Board, Printed Circuit Network Module 8 0 Rail, Terminal Block 86 0 Block, Terminal (Sectional) 8 Bracket, End Terminal 5 8 Plate, End Terminal Screw, Pan Head (M x 0.5 x 8) 80 0 Standoff, Hex Thread (M) Screw, Phillips/Hex Head GND (M x 0) Harness, Network 0 Battery Lithium (.0V) (Purchase Locally) 6 0 Clip, Battery 8

31 Current Transformer Module M Board, Printed Circuit Current Module Screw, Pan Head (M x 8) Harness, Current Module (Includes Parts Marked *) * Connector, Receptacle (0 Pin) * Socket, Contact 6 Lead (Marked J0, GND) 6 0 (No Markings) 0 Mount, Cable Tie 8 Plate, Mounting 80 0 Nut, Self-Locking (/ 0) Screw, Cap Hex Head (/ 0 x.5) Transformer, Current 50 Amp VAC 0 8 Phase, or Wire 0 8 Phase, or Wire 5 Amp VAC 0 00 Phase, or Wire 0 00 Phase, or Wire 60 Amp 0 0 VAC 0 Phase, or Wire 0 Phase, or Wire * Parts Included in Wiring Harness

32 Terminal Block A0,K00,K00,K Rail, Terminal Block 86 0 Block, Terminal (Sectional) 8 Bracket, End Terminal 8 Plate, End Terminal 0

33 Auxiliary Relay L0,0,0,0,0,0,0,0 8 0 Rail, Terminal Relay, Control 0 8 VDC 0 8 VDC 88 Bracket, End Screw, Phillips/Hex Head GND (M x 0)

34 Load Shed M00,R0 Harness, Load Shed All Except 600 Volt Volt 0 Relay PDT ( VDC) 0 Mount, Cable Tie Screw, Pan Head (M x 8) Board, Printed Circuit Relay Module Screw, Pan Head (M x 8) Plate, Mounting Nut, Self-Locking (/ 0) Screw, Cap Hex Head (/ 0 x.5)

35 Front Panel Security M Switch, Selector Lead 6 0 (Marked S0 J 5) (Marked S0 J )

36 Numerical Index Part No. Page Part No. Page Part No. Page Part No. Page 6 80, , 5, , , ,, 5, 05 08, 5, , , ,, 5,, 5, 6 0, 6 0, 6 0, 6 0, 00 6, 00 60, 5 00, 00 56,, 5, ,, 5, ,, 5, ,, 5, ,, 5, ,, 5, ,, 5, ,, 5, ,, 5, ,, 5, 00 55,, 5, 00 55, 00 55, ,, 5, , , 00 55, 00 5, 00 5, 5, 00 5, 5, 00 5, 5, 0 6, 0 0, 0, 0 00, 0 080, 0, 0 8, 0 8, 5, 0 005, 0 00, 0 0, , , 06 8, , , 06 8,, , 06 5, 06, , 06,, 06 8, 06 0, 06 6,, , 06 0, 06 0, 06 05, 06 06, 06, 06 8, 06 8, 06 55, , , , 06 5, 06 55, 06 56, 06 58, 06 60, 06 6, 06, , , , , 06 6, , , , , , , , , 06 0, 06 0, 06 0, 06 0, , , , , , , , , , 06 05, 06 05, 06 05, , , , , , , , , , , , 06 06, 06 06, 06 06, 06 06, , , , , , , , 06 0, 06 0, 06 0, , 06 5,, 5, 0 8,, 0 8, 0, 8,, 0, , 8, 08 0, 0 0, 00, 00, 00, , , , , 5 066,, 5, 5 000, , 5 00, , 5 00, , 5 006, , 5 008, , 5 00, 5 5 0, 5 0, 5 5 0, 00, 5, 00, 5,

37 Numerical Index Part No. Page Part No. Page Part No. Page Part No. Page 86 0, 8,, 5, ,, 5, 85 05, 865 0, 05, 5, ,, 5, 85 05, 5, 86 0, 5 0, , , 86 0, 5 0, , , 868 0, , , , 80 0, 0,,,, 8 886, , 8 0, 5, 6 000, 5, , 8 0, 605, 06 05, , 8,, 85 0, 05, 06 06, ,, 5, 8 0, 5 8, 06 06, , 0 8 0, , , 85 0, , , 88 0, 0 0, 8, 0, 8, 0, 8,,,,, 0 0, , , 0 060, 00, 5, 0, 5, 05, 05, 0, 5, 00 0, 5, 00 0, , , 5, 00 0, 5, 00 05, 5, 00 06,, 0,, 00, 0,,, 5, 5, 0 5, 0, 0,, 5,, ,, 0 8 0,, 8, 0 8,, 8, 0 8,, 8, 0 88,, 8 0, 8 0, 0, 08, 0, 606,, 6,, 5, 65, 66, 0, 0, 0 0, 0 0, 0 0,, 8, 8, 0 8 0, 0 8, 5, 8 50, 8, 8 86, ,, 5, ,, 5, ,, 5, , 06 0, 06 0, 6 0, , 5, , 508, 5 05, 5 0, 5 066, 5,, , , 56 00, 56 00, ,, ,,,, , , , , , , , , 5, 8 0, 8 0, 8 06, 85 00, 85 06,, 85 00, , 8,,,, 8, , ,, 5,, 8,, , 8, 8 000,, 5, , 85 00, , , , , , ,, 5, 80 0,, 5,, 80 00, 80 0,, 5,,,,, 80 0, 5, 80 05, , 5, 80 08, 80 08, , 80 0, ,, 5, , 5, , 5, , 5, , 5, 5, ,, 5, 85 06, 5

38 Cummins Power Generation 00 rd Avenue N.E. Minneapolis, MN International Use Fax: Cummins is a registered trademark of Cummins Inc.

Parts Manual. Generator Set. DFLB (Spec S T) DFLC (Spec V W) DFLE (Spec D F) with PowerCommand 2100 and 3100 Control

Parts Manual. Generator Set. DFLB (Spec S T) DFLC (Spec V W) DFLE (Spec D F) with PowerCommand 2100 and 3100 Control Parts Manual Generator Set with PowerCommand 00 and 00 Control DFLB (Spec S T) DFLC (Spec V W) DFLE (Spec D F) English Original Instructions -0 090 09 (Issue 9) To avoid errors or delay in filling your

More information

This Datasheet for the IC697CHS790. Rack, 9 Slots, Rear Mount.

This Datasheet for the IC697CHS790. Rack, 9 Slots, Rear Mount. This Datasheet for the IC697CHS790 Rack, 9 Slots, Rear Mount. http://www.cimtecautomation.com/parts/p-14771-ic697chs790.aspx Provides the wiring diagrams and installation guidelines for this GE Series

More information

Model 2460-KIT. Screw Terminal Connector Kit. Description / September 2014 *P * 1

Model 2460-KIT. Screw Terminal Connector Kit. Description / September 2014 *P * 1 Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Model 2460-KIT Screw Terminal Connector Kit Description The Model 2460-KIT Screw Terminal Connector Kit

More information

This 4200-RM Rack Mount Kit is for installation in 4200-CAB series cabinets only.

This 4200-RM Rack Mount Kit is for installation in 4200-CAB series cabinets only. Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 (440) 248-0400 Fax: (440) 248-6168 www.keithley.com Model 4200-RM Rack Mount Kit Packing List Introduction NOTE This 4200-RM Rack Mount

More information

PS/IO Circuit Board Retrofit

PS/IO Circuit Board Retrofit S&C 6800 Series Automatic Switch Controls PS/IO Circuit Board Retrofit Table of Contents Section Page Introduction Qualified Persons.... 2 Read this Instruction Sheet.... 2 Retain this Instruction Sheet....

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS TT-40 9/0 INSTALLATION INSTRUCTIONS Original Issue Date: 9/0 Model: Automatic Transfer Switches Equipped with the Programmable Controller Market: ATS Subject: External Battery Supply Module Kit GM69-KP

More information

TraceTek Leak Detection Master Module Installation Instructions TOOLS REQUIRED STORAGE

TraceTek Leak Detection Master Module Installation Instructions TOOLS REQUIRED STORAGE TTDM-128 TraceTek Leak Detection Master Module Installation Instructions TRACETEK APPROVALS AND CERTIFICATIONS TYPE NM General Signaling Equipment 76LJ GENERAL INFORMATION Please read these instructions

More information

Installation Instructions

Installation Instructions 50ES, 50EZ, 50GL, 50GS, 50GX, 50JS, 50JX, 50JZ, 50SD, 50SZ, 50VL, 50VT, 50XP, 50XZ 601A, 602A, 602B, 604A, 604B, 604D, 607C, 701A, 702A, 702B, 704A, 704B, 704D, 707C PA1P, PA2P, PA3P, PH1P, PH2P, PH3P

More information

Model 7705 Control Module

Model 7705 Control Module www.keithley.com Model 7705 Control Module User s Guide PA-696 Rev. D / October 2006 A G R E A T E R M E A S U R E O F C O N F I D E N C E Safety Precautions The following safety precautions should be

More information

GV3000/SE AC Drive ControlNet Network Communication Option Board M/N 2CN3000

GV3000/SE AC Drive ControlNet Network Communication Option Board M/N 2CN3000 GV3000/SE AC Drive ControlNet Network Communication Option Board M/N 2CN3000 Instruction Manual D2-3390-2 The information in this manual is subject to change without notice. Throughout this manual, the

More information

LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio

LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................

More information

ETI. Renewal Parts Catalog. 313NP Network Protector

ETI. Renewal Parts Catalog. 313NP Network Protector ETI ELECTRONIC TECHNOLOGY INCORPORATED 511 LYONS AVENUE, IRVINGTON, NJ 07111 PHONE 973-371-5160 FAX 973-371-1929 E-MAIL sales@eti-nj.com www.eti-nj.com RICHARDS MFG. CO. SALES INC. 517 LYONS AVENUE, IRVINGTON,

More information

Installing the DX LCD Display

Installing the DX LCD Display DX LCD Display User s Guide 3-1 Chapter 3 Installing the DX LCD Display Introduction Use the DX LCD Display as either a portable device, or permanently mount it in a panel or on the wall. For panel and

More information

Dishmachine Division Please call for pricing or

Dishmachine Division Please call for pricing or Dishmachine Division Please call for pricing -00-- or -00-5- ELECTRICAL BOX Page 0 and PLUMBING Page WRAPPER Page - PAN Page -5 STAND Page and KLE--HL Convertible Dishwashing Machine Part No. 05 5 5 0

More information

170 ADM to 60 VDC Module Base / 170 ADO Pt. Relay Out Module Base. Version 1.0

170 ADM to 60 VDC Module Base / 170 ADO Pt. Relay Out Module Base. Version 1.0 170 ADM 850 10 10 to 60 VDC Module Base / 170 ADO 830 30 6 Pt. Relay Out Module Base Version 1.0 31005197 00 Safety Information NOTICE Read these instructions carefully, and look at the equipment to become

More information

LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio

LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio LH 00 Spare parts list Forward and reversible plate LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio Valid from serial

More information

The power behind competitiveness. Delta Infrasuite Power Management. Power Distribution Unit. User Manual.

The power behind competitiveness. Delta Infrasuite Power Management. Power Distribution Unit. User Manual. The power behind competitiveness Delta Infrasuite Power Management Power Distribution Unit User Manual www.deltapowersolutions.com Save This Manual This manual contains important instructions and warnings

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT

More information

Illustrated Parts List. Generator Systems. Reproduction MODEL Not for. 12,000 Watt. Generator Systems

Illustrated Parts List. Generator Systems. Reproduction MODEL Not for. 12,000 Watt. Generator Systems Illustrated Parts List Generator Systems MODEL 12,000 Watt Generator Systems Manual Part No. Revision D Rev. Date: 8/9/2016 Table Of Contents PRODUCT COMPONENTS PAGES Power Group... 4 Alternator... 6

More information

SITRANS F. Flowmeters SysCom Upgrade Kit IP65 (NEMA 4X) Multi-Channel. Introduction 1. Installing/Mounting 2. Hardware Installation Instructions

SITRANS F. Flowmeters SysCom Upgrade Kit IP65 (NEMA 4X) Multi-Channel. Introduction 1. Installing/Mounting 2. Hardware Installation Instructions Introduction 1 Installing/Mounting 2 SITRANS F Flowmeters SysCom Upgrade Kit IP65 (NEMA 4X) Multi-Channel Hardware Installation Instructions 1/2010 A5E02518333A Revision 04 Legal information Warning notice

More information

Model 2657A-LIM-3 LO Interconnect Module

Model 2657A-LIM-3 LO Interconnect Module Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY http://www.keithley.com Model 2657A-LIM-3 LO Interconnect Module User's Guide Description The Model 2657A-LIM-3 LO Interconnect

More information

SPECIAL INSTRUCTIONS FOR CAPACITORS COMPACT GENERATORS

SPECIAL INSTRUCTIONS FOR CAPACITORS COMPACT GENERATORS SPECIAL INSTRUCTIONS FOR CAPACITORS COMPACT GENERATORS (WITH CAPACITOR CHARGER BOARD A3517-02) The process depends on Generator and System configuration. This document applies to installation of Capacitors

More information

MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:

MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER: MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial

More information

Illustrated Parts List

Illustrated Parts List Illustrated Parts List SERIAL NUMBERS 730080-730074 ENGINE RELATED COMPONENTS... ENGINE RELATED COMPONENTS...3 ENGINE RELATED COMPONENTS...4 BASE, COVER... BASE, COVER... BASE, COVER...7 BASE, COVER...8

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS HS300 QUART MIXER ML-134453 ML-134473 ML-134474 ML-134475 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43192 (July 2009) - 2 - HOBART 2009 Table of Contents

More information

Repair Parts List DRYER MODEL NUMBER MDG75MNVWQ. When requesting service or ordering parts, always provide the following information:

Repair Parts List DRYER MODEL NUMBER MDG75MNVWQ. When requesting service or ordering parts, always provide the following information: Repair Parts List DRYER MODEL NUMBER MDG75MNVWQ When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005

More information

TRC-190 User s Manual

TRC-190 User s Manual First Edition, November 2008 www.moxa.com/product 2008 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. The software described in this manual is furnished under a license agreement

More information

Parts Manual Kleen Sweep 32R Rider Sweeper

Parts Manual Kleen Sweep 32R Rider Sweeper Parts Manual Kleen Sweep 32R Page 2 Table of Contents Side broom R.H., part 1... Side broom R.H., part 2... Front wheel drive... Accelerator... Steering... Seat group... Group of main sweeper roller, part

More information

XDBKITS5 Bus / DB Terminal Kit (Size 5) Installation Manual DPD00116

XDBKITS5 Bus / DB Terminal Kit (Size 5) Installation Manual DPD00116 XDBKITS5 Bus / DB Terminal Kit (Size 5) Installation Manual DPD00116 XDBKITS5 Option Kit Installation Manual vacon 3 Installing the Bus / DB Terminal Option Kit Introduction The XDBKITS5 option kit is

More information

920 Remote Control (RC) Switches

920 Remote Control (RC) Switches 920 Remote Control (RC) Switches ASCO is the global leader in power switching and controls ASCO 920 PRODUCT SPECIFICATIONS SWITCH ONLY (PANELBOARD MOUNTING) 1,2,3 () DIMENSIONS, IN.(MM) WIDTH HEIGHT DEPTH

More information

S Reclosers Kyle Type VXE Electronic Control SCADA Input/Output Board Installation and Operation Instructions

S Reclosers Kyle Type VXE Electronic Control SCADA Input/Output Board Installation and Operation Instructions Reclosers Kyle Type VXE Electronic Control SCADA Input/Output Board Installation and Operation Instructions Cooper Power Systems Service Information S0-6- Applicable to VXE5 reclosers serial number 006

More information

C-Series. Circuit Breaker

C-Series. Circuit Breaker C-Series Circuit Breaker The C-Series hydraulic/magnetic circuit breakers are ideal for applications that require higher amperage and voltage handling capability in a smaller package. They are available

More information

AutoScan to MultiScan Replacement Kit

AutoScan to MultiScan Replacement Kit Instruction Sheet P/N AutoScan to MultiScan Replacement Kit WARNING: Allow only qualified personnel to perform the following tasks. Observe and follow the safety instructions in this document and all other

More information

Upgrading Legacy Iso-Gard Line Isolation Monitors and Remote Indicators

Upgrading Legacy Iso-Gard Line Isolation Monitors and Remote Indicators Instruction Bulletin MED10130101 01/2013 Upgrading Legacy Iso-Gard Line Isolation Monitors and Remote Indicators Retain for future use. Introduction This bulletin describes the procedures and components

More information

1. Mount the echo and tremolo control switches under the keyboard shelf, in a position convenient for the organist.

1. Mount the echo and tremolo control switches under the keyboard shelf, in a position convenient for the organist. CONSOLE CONNECTOR KIT 8101 INSTALLATION INSTRUCTIONS FOR USE WITH: HAMMOND Organ Models A-100, D-100, RT2, RT3 LESLIE Speaker Models 122, 122RV KIT CONTENT Console Connector Assembly 047357 Echo Control

More information

CATALOG OF REPLACEMENT PARTS

CATALOG OF REPLACEMENT PARTS CATALOG OF REPLACEMENT PARTS HS600 MIXER HS600 HS600 HS600CE HS600CE ML-141022 ML-141023 ML-141024 ML-141025 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43232 (December 2010) TABLE

More information

RYOBI 10 in. (254 mm) TABLE SAW - MODEL NO. BTS20

RYOBI 10 in. (254 mm) TABLE SAW - MODEL NO. BTS20 A0 OUTFEED SUPPORT RYOBI in. ( mm) TABLE SAW - MODEL NO. BTS0 FIGURE B: OUTFEED SUPPORT 0 OUTFEED SUPPORT... 0 SCREW (/-0 x / in.)... 00 OUTFEED SUPPORT ROD... 00 STOP SCREW (M X mm)... FIGURE C: BLADE

More information

Rider AMP TM. Parts Manual. Model In. S.D. Deck /09 Printed in USA

Rider AMP TM. Parts Manual. Model In. S.D. Deck /09 Printed in USA AMP TM Parts Manual Rider Model 900 -In. S.D. Deck 0800 /09 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide

More information

SPECIAL SPECIFICATION 1864 Pole Mounted Cabinet

SPECIAL SPECIFICATION 1864 Pole Mounted Cabinet 1993 Specifications CSJ s 0924-06-221,etc. & 0924-06-223 SPECIAL SPECIFICATION 1864 Pole Mounted Cabinet 1. Description. This specification describes the minimum acceptable requirements for a weatherproof

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE

More information

ASCO 920 Remote Control (RC) Switches

ASCO 920 Remote Control (RC) Switches Maximum reliability and excellent value ASCO 920 Remote Control (RC) Switches ASCO 920 Remote Control Switch in Type Enclosure The ASCO 920 is designed as a feeder disconnect switch for load capacities

More information

Husqvarna X4000. Illustrated Parts List Jun 2009

Husqvarna X4000. Illustrated Parts List Jun 2009 Husqvarna Illustrated Parts List -0 0 Jun 00 MAINFRAME 00 000 MAINFRAME ASSEMBLY, 000 COVER, BELT GUARD 00 WHEEL COVER 000 ROLLCAGE, RIGHT 000 ROLLCAGE, LEFT 00 BLOCK, SPRING 00 BRACKET, ACTUATOR MOUNT

More information

LVN5200A-R2, rev. 1, Hardware Installation Guide

LVN5200A-R2, rev. 1, Hardware Installation Guide LVN5200A-R2 LVN5250A-R2 LVN5200A-R2, rev. 1, Hardware Installation Guide Customer Support Information Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support

More information

FCC17 Series FILTERED STACKED D-SUB CONNECTORS

FCC17 Series FILTERED STACKED D-SUB CONNECTORS FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP

More information

MODEL SST3-MV INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SST3-MV SELECTABLE SIRENTONE-MULTI VOLT

MODEL SST3-MV INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SST3-MV SELECTABLE SIRENTONE-MULTI VOLT MODEL INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SELECTABLE SIRENTONE-MULTI VOLT INSTALLATION INSTRUCTIONS FOR FEDERAL MODEL SELECTABLE SIRENTONE-MULTI VOLT A. GENERAL. The Federal Model is a solid-state

More information

Magnetic Circuit Protectors 153. Multi-Pole Circuit Protectors 154. APL/UPL, 205/295 Barriers 155. Configurations 156. Operating Characteristics 158

Magnetic Circuit Protectors 153. Multi-Pole Circuit Protectors 154. APL/UPL, 205/295 Barriers 155. Configurations 156. Operating Characteristics 158 Magnetic Circuit Protectors 53 Multi-Pole Circuit Protectors 54 APL/UPL, 205/295 Barriers 55 Configurations 56 Operating Characteristics 58 Delay Curves 59 Specifications 64 APL/UPL Decision Tables 70

More information

Model QRS CPVS

Model QRS CPVS SPARE PARTS LIST EN CP COMPRESSOR Model QRS 0-5 - 0 CPVS 0-5 - 0 6 05 50 65 KEY - Door Panel: 655900 Lock - Door Panel: 005076 QRS 0 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? KIT

More information

AutoMax Network Communication Option Board for use with GV3000/SE AC Drives M/N 2AX3000

AutoMax Network Communication Option Board for use with GV3000/SE AC Drives M/N 2AX3000 AutoMax Network Communication Option Board for use with GV3000/SE AC Drives M/N 2AX3000 Instruction Manual D2-3308-7 The information in this manual is subject to change without notice. Throughout this

More information

* * Agilent Power Distribution Unit (PDU) Installation Guide

* * Agilent Power Distribution Unit (PDU) Installation Guide Agilent Power Distribution Unit (PDU) Installation Guide For use with Agilent PDU kits and PDU installation kits for Agilent instrument racks June 2008 Edition 7 E0608 *5000-0039* 5000-0039 Notice The

More information

PLC Racks IC697CHS782/783

PLC Racks IC697CHS782/783 5 1 PLC Racks IC697CHS782/783 (IC697CHS782/783) datasheet Features Accepts 3rd Party VME modules which require 0.8 spacing. Accepts all IC697 PLC module types. Rear mount rack mounts in a 10 (254 mm) deep

More information

Repair Parts List DRYER MODEL NUMBER MDG50PNHWW. When requesting service or ordering parts, always provide the following information:

Repair Parts List DRYER MODEL NUMBER MDG50PNHWW. When requesting service or ordering parts, always provide the following information: Repair Parts List DRYER MODEL NUMBER MDG50PNHWW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005

More information

SubArc AC/DC Digital, 1000 Amp SubArc AC/DC 1250 Digital

SubArc AC/DC Digital, 1000 Amp SubArc AC/DC 1250 Digital TM-262 546E 2016 05 Processes Submerged Arc (SAW) Welding Description Arc Welding Power Source SubArc AC/DC Digital, 1000 Amp SubArc AC/DC 1250 Digital CE And Non-CE Models Eff w/me170053c And Following

More information

AC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY. INSTALLATION INSTRUCTIONS Document Number:

AC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY. INSTALLATION INSTRUCTIONS Document Number: Minarik Variable Speed AC Motor Drives AC300/AC400 SERIES DYNAMIC BRAKING and ADDITIONAL FORM C RELAY INSTALLATION INSTRUCTIONS Document Number: 250-0297 These instructions apply to models rated: 7.5 25

More information

User s Manual. ACS550-PD 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual

User s Manual. ACS550-PD 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual User s Manual ACS550-PD 3R Irrigation Packaged Drive Supplement to ACS550-U1 User s Manual 2 ACS550-PD 3R Irrigation Packaged Drive ACS550 Drive Manuals GENERAL MANUALS ACS550-U1 User s Manual (1 200 HP)

More information

CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS

CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS FOR USE WITH: HAMMOND Organ Models L-100, M-100 Series, M-l, M-2, M-3 LESLIE Speaker Models 760, 770, 825 KIT CONTENT Console Connector Assembly 043075

More information

C-Series. Circuit Breaker

C-Series. Circuit Breaker C-Series Circuit Breaker The C-Series hydraulic/magnetic circuit breakers are ideal for applications that require higher amperage and voltage handling capability in a smaller package. They are available

More information

CODE 50108, 50110, 50164, 50165

CODE 50108, 50110, 50164, 50165 CODE 50108, 50110, 50164, 50165 ASSEMBLY PAGE NAME Machine Assembly Machine Assembly Machine Assembly (Wire feed chamber) Machine Assembly (Wire feed chamber) Feeding Unit Assembly CODE NO.: K NO.: FIGURE

More information

PowerFlex 755 Transition Section and Splicing Kit for Floormount Drives and CENTERLINE 2100 Motor Control Centers

PowerFlex 755 Transition Section and Splicing Kit for Floormount Drives and CENTERLINE 2100 Motor Control Centers Installation Instructions PowerFlex 755 Transition Section and Splicing Kit for Floormount Drives and CENTERLINE 2100 Motor Control Centers Topic Page Introduction, Compatibility 1 Additional Resources

More information

93T Classic Treadmill - 4HP AC - Heart Rate 93T

93T Classic Treadmill - 4HP AC - Heart Rate 93T 93T Classic Treadmill - 4HP AC - Heart Rate 93T-0100-09 Parts Manual 1/5/2019 8:05:39 AM Table of Contents Belt, Deck and Rear Rollers...3 Block Diagram 1...4 Block Diagram 2...5 Block Diagram 3...6 Console

More information

Raven Adapter Harness

Raven Adapter Harness Note: Indented items indicate parts included in an assembly listed above Quantity by System Part Name/Description Part Number With Switch Box With Built-in Switches Raven Harness Adapter Kit 4100504 1

More information

Illustrated Parts List MODEL. Reproduction Not for. 8,000 Watt Generator Systems

Illustrated Parts List MODEL. Reproduction Not for. 8,000 Watt Generator Systems Illustrated Parts List MODEL 040350-00 040350-01 8,000 Watt Generator Systems IPL No.1756640 Rev. C 8/11/2015 PRODUCT COMPONENTS Table Of Contents PAGES Alternator Group... 4 Control Panel Group... 6

More information

Micromatic 17B PARTS LIST. Advance MODEL This parts list is for machines after serial number /96 revised 8/01 FORM NO.

Micromatic 17B PARTS LIST. Advance MODEL This parts list is for machines after serial number /96 revised 8/01 FORM NO. Micromatic B PARTS LIST Advance MODEL 000 This parts list is for machines after serial number 9/9 revised /0 FORM NO. 0 9-9 00- TABLE OF CONTENTS Micromatic B DESCRIPTION PAGE Chassis System... - Solution

More information

M-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc

M-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:

More information

TRC-190 User s Manual

TRC-190 User s Manual User s Manual Edition 3.2, May 2017 www.moxa.com/product 2017 Moxa Inc. All rights reserved. User s Manual The software described in this manual is furnished under a license agreement and may be used only

More information

The accessory described in this manual is a high quality product that has been carefully designed and manufactured to guarantee optimal performance.

The accessory described in this manual is a high quality product that has been carefully designed and manufactured to guarantee optimal performance. INTRODUCTION Thank you for choosing our product. The accessory described in this manual is a high quality product that has been carefully designed and manufactured to guarantee optimal performance. This

More information

Procedure to Install an IO Expansion Cage Assembly in a Maxum II Modular Oven Analyzer

Procedure to Install an IO Expansion Cage Assembly in a Maxum II Modular Oven Analyzer Procedure to Install an IO Expansion Cage Assembly in a Maxum II Modular Oven Analyzer Difficulty Level: Medium Estimated time to execute: 1 Hour Revision History Issue Date Reason 001 5/31/2016 Initial

More information

IBM. Rack Installation Instructions

IBM. Rack Installation Instructions IBM Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When installing your server in a rack cabinet, consider the following:

More information

Cutter Option Installation Instructions

Cutter Option Installation Instructions This kit includes the parts and documentation necessary to install the cutter option on the Zebra XiII, XiIII, and XiIIIPlus-Series printers. NOTE: The Cutter Option is not available for the 96XiIII. Adding

More information

HD22 and HD30 Service Parts

HD22 and HD30 Service Parts HD and HD0 Service Parts This is the list of service parts and wiring diagrams for all versions of these two hotel dispensers. Pay close attention to the voltage and/or cycles to be sure of ordering the

More information

PARTS DESCRIPTION LISTING

PARTS DESCRIPTION LISTING PARTS DESCRIPTION LISTING Form 4-157e, 11-09 Sheet 2 of 6 Index No. Part Number Description A 16-889-1 TUBE ASSEMBLY, CAMERA SUPPORT CM (See Sheet 5) B 69-1063-1 COVER, ASSEMBLY BACK DSP600 (See Sheet

More information

Resolver to Digital Expansion Board

Resolver to Digital Expansion Board Resolver to Digital Expansion Board Catalog No. EXB009A01 Installation and Operating Manual 6/98 MN1313 Table of Contents Section 1 General Information............................. 1-1 Introduction....................................

More information

PACSystems RX7i IC698CHS009/119

PACSystems RX7i IC698CHS009/119 January 2010 The RX7i rack can be used for all RX7i CPU and I/O configurations, Series 90-70 I/O, and VME modules. Backplane connectors are spaced on 0.8" (20.3mm) centers to accommodate single-width RX7i

More information

Basketball Shot Clock Set LX2180 Manual

Basketball Shot Clock Set LX2180 Manual Basketball Shot Clock Set LX2180 Manual 72 Industrial Boulevard Wrightsville, GA 31096 Phone: (800) 445-7843 Fax: (800) 864-0212 www.electro-mech.com LX2180 Revision 5 February 8, 2013 Table of Contents

More information

ENCORE S2426 and L2426

ENCORE S2426 and L2426 ENCORE S226 and L226 Section II Parts and Service Manual (70200A) CLARKE TECHNOLOGY Operator's Manual - Encore S226/L226 Page -27- HOW TO CORRECT PROBLEMS IN THE MACHINE PROBLEM CAUSE ACTION There is no

More information

GV3000/SE Operator Interface Module (OIM) User Guide Version 2.0 M/N 2RK3000

GV3000/SE Operator Interface Module (OIM) User Guide Version 2.0 M/N 2RK3000 GV3000/SE Operator Interface Module (OIM) User Guide Version 2.0 M/N 2RK3000 Instruction Manual D2-3342-2 The information in this manual is subject to change without notice. Throughout this manual, the

More information

Illustrated Parts List MODEL. Reproduction Not for. 8,000 Watt Generator Systems

Illustrated Parts List MODEL. Reproduction Not for. 8,000 Watt Generator Systems Illustrated Parts List MODEL 040350-00 040350-01 8,000 Watt Generator Systems IPL No.1756640 Rev. B 1/22/2015 PRODUCT COMPONENTS Table Of Contents PAGES Alternator Group... 4 Control Panel Group... 6

More information

Pronto Air Personal Transporter

Pronto Air Personal Transporter Parts Catalog Issued: Sep 20, 2018 Pronto Air Personal Transporter with MyBody Seating Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog

More information

Phase Loss Protection Upgrade. Phase Loss Protection Upgrade. In this bulletin:

Phase Loss Protection Upgrade. Phase Loss Protection Upgrade. In this bulletin: Phase Loss Protection Upgrade In this bulletin: Introduction... 2 Purpose... 2 General... 2 Applicability... 2 HD3070 Phase Loss Protection Upgrade Kit Parts... 2 Preparation... 4 Install the Phase Loss

More information

PACSystems* RX3i IC695ACC650

PACSystems* RX3i IC695ACC650 September 2012 PACSystems* RX3i IC695ACC650 Series 90-70 to RX3i Conversion Rack The conversion rack provides a solution for converting an existing Series 90-70 system to PACSystems RX3i, minimizing outage

More information

Altivar 61/71 Adjustable Speed Drives Heatsink Fan Kits VZ3V1212 and VZ3V1216

Altivar 61/71 Adjustable Speed Drives Heatsink Fan Kits VZ3V1212 and VZ3V1216 Altivar 61/71 Adjustable Speed Drives Heatsink Fan Kits VZ3V1212 and VZ3V1216 Instruction Bulletin 30072-452-48 Retain for future use. 30072-452-48 Altivar 61/71 Heatsink Fan Kits VZ3V1212 and VZ3V1216

More information

Time delay undervoltage module

Time delay undervoltage module Supersedes December 2010 Power Defense ICCB Series NRX IZMX Instructions apply to: UL489 IEC UL1066/ANSI : PD-NF, Series NRX NF : PD-NF, IZMX16 : Series NRX NF UL489 : PD-RF IEC : PD-RF, IZMX40 120VAC

More information

Quick Start Guide TS A

Quick Start Guide TS A Quick Start Guide TS 930 125-630A DANGER HAZARD OF ELECTRICAL SHOCK, EXPLOSION, OR ARC FLASH Read and understand this quick start guide before installing and operating the transfer switch The installer

More information

Model HM-535 Power Supply Installation and Service Instructions

Model HM-535 Power Supply Installation and Service Instructions Model HM-535 Power Supply Installation and Service Instructions 430-535 0104 2004 Heritage MedCall, Inc SENTRY INSTALLATION & SERVICE INSTRUCTIONS POWER SUPPLY UNIT Model HM-535 IMPORTANT SAFETY INSTRUCTIONS

More information

DC Outdoor Power Supply/Chargers

DC Outdoor Power Supply/Chargers DC Outdoor Power Supply/Chargers Installation Guide Models Include: WayPoint3 WayPoint7-2.5A @ 12VDC or 24VDC. - 6A @ 12VDC or 24VDC. - 115/230VAC input. - 115VAC input. WayPoint5 WayPoint7V - 4A @ 12VDC

More information

Instruction Manual. M Pump Motor Controller. For file reference, please record the following data:

Instruction Manual. M Pump Motor Controller. For file reference, please record the following data: Instruction Manual M Pump Motor Controller For file reference, please record the following data: Model No: Serial No: Installation Date: Installation Location: When ordering replacement parts for your

More information

APPLICATION CONTROL GUIDELINES. IntelliROL Power Supply PN Revision Date: March 15, 2017

APPLICATION CONTROL GUIDELINES. IntelliROL Power Supply PN Revision Date: March 15, 2017 APPLICATION CONTROL GUIDELINES IntelliROL Power Supply PN 1176718 Revision Date: March 15, 2017 Table of Contents List of Tables...3 TGW Safety Recommendation...4 Warnings and Safety Instructions...5 Introduction...6

More information

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL SERVICE PARTS MANUAL SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBERS BEFORE G10000 WITH SERIAL NUMBERS AFTER G00000 FOR DOWN PRESSURE HYDRAULICS WITH

More information

Owner s Manual SGA 100 And SGA 100C NOTE NOTE. 1. Safety Symbol Definitions. 2. Weld Control Specifications. 3. Duty Cycle

Owner s Manual SGA 100 And SGA 100C NOTE NOTE. 1. Safety Symbol Definitions. 2. Weld Control Specifications. 3. Duty Cycle Owner s Manual SGA 100 And SGA 100C October 2001 FORM: OM-190 753H Use above FORM number when ordering extra manuals. 1. Safety Symbol Definitions Warning! Watch Out! There are possible hazards as shown

More information

060-Hardware. Clamps and Brackets Hose Clamps

060-Hardware. Clamps and Brackets Hose Clamps Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"

More information

MULTI 9 System Catalog UL Recognized C60N Supplementary Protectors

MULTI 9 System Catalog UL Recognized C60N Supplementary Protectors UL Recognized C60N Supplementary Protectors B Curve C60N Supplementary Protectors 1 MG24110 MG24125 MG24140 MG24155 15 MG17406 MG17436 MG17461 1.2 MG17402 MG17432 16 MG24118 MG24133 MG24148 MG24163 1.5

More information

Site Preparation CHAPTER

Site Preparation CHAPTER CHAPTER 3 Site Preparation This chapter describes the steps to take and the considerations you should keep in mind prior to installing the modules in an open rack. It also contains information that applies

More information

C-POWER AC AUTOMATIC CONTROL

C-POWER AC AUTOMATIC CONTROL Issue 1 Print 1 C-POWER AC AUTOMATIC CONTROL INSTALLATION INSTRUCTIONS & OWNER S MANUAL Model: 93 ACMC100I A Charles Industries, Ltd. All rights reserved. Printed in the United States of America. Issue

More information

Model 2380 Rack-Mount Kit

Model 2380 Rack-Mount Kit Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley Model 2380 Rack-Mount Kit Installation Instructions Introduction The Model 2380 Fixed Rack-Mount

More information

COOPER POWER SERIES. Form 4C microprocessor-based recloser control standard and automation power supply kit installation and operation instructions

COOPER POWER SERIES. Form 4C microprocessor-based recloser control standard and automation power supply kit installation and operation instructions Reclosers MN280033EN Effective December 2015 Supersedes S280-77-9 July 2002 COOPER POWER SERIES Form 4C microprocessor-based recloser control standard and automation power supply kit installation and operation

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker

Magnetic and Hydraulic-Magnetic Circuit Breaker Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics ensures suitability for a wide range of applications.

More information

RAM Rail Mount Kit RAM 201U 5 Arm RAM 2461U Monitor Mount RAM 235U Base, Double U-Bolt

RAM Rail Mount Kit RAM 201U 5 Arm RAM 2461U Monitor Mount RAM 235U Base, Double U-Bolt Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity DirectCommand Kit 4100800 1 Cable Installation Kit 2000901-1 1 Dielectric Grease 2002872

More information

17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 1 of 22 Deck Lift & Controls

17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 1 of 22 Deck Lift & Controls 17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 1 of 22 Deck Lift & Controls 17AE2ACG011 MUSTANG COLT RZT 42 (2008) Page 2 of 22 Deck Lift & Controls Ref # Part Number Qty S/P/F Description 1 603-04160B 1

More information

Input Power Selector Switch. Product Manual (Revision NEW) Original Instructions for use with Generator Set Control Assembly

Input Power Selector Switch. Product Manual (Revision NEW) Original Instructions for use with Generator Set Control Assembly Product Manual 82017 (Revision NEW) Original Instructions 9900-471 for use with 8272-713 Generator Set Control Assembly Operation Manual General Precautions Read this entire manual and all other publications

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS CONSOLE CONNECTOR KIT 7830 FOR USE WITH: LESLIE Speaker Model 130 Various single and double channel organs INSTALLATION INSTRUCTIONS KIT CONTENT Console Connector 137283 Switch Assembly, Cable Assembly,

More information

Rack Installation Instructions

Rack Installation Instructions Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When installing your server in a rack cabinet, consider the following: v Two

More information