Thermal-Magnetic Circuit Breaker 4220-T...

Transcription

1 Thermal-Magnetic Circuit Breaker 40-T... Description Single, double and three pole thermal-magnetic circuit breakers with high rupture capacity to UL 489 (5 ka), EN/IEC (6kA) and UL 077 (5 ka). With toggle actuation, positively trip-free mechanism, a choice of characteristic curves and a wide range of current ratings in finely graded steps from 0. A through 3 A. Auxiliary contacts (make or break contacts) are optionally available. Track-mountable design, width only.5 mm. Ease of wiring by means of an integral busbar concept: line entry busbar LINE+ and signal /signal jumpers. US patent number: US 8,098,9 B (Modularity) US patent number: US 7,978,033 B (Release Mechanism) US patent number: US 7,834,90 B (Quenching Chamber) Typical applications single pole 40-T... three pole Protection of power supplies, equipment and cables in centralised control systems and in decentralised installations serving automation, petro-chemical, power plant, steel industry and similar industrial applications. Ordering Information Type number 40 thermal-magnetic high performance circuit breaker Mounting T track-mounting Number of poles single pole double pole 3 three pole Additional feature 0 without actuator guard with actuator guard Main terminals K0 6 mm / 0 mm Characteristic curve F thermal-magnetic, extremely fast, DC F thermal-magnetic, fast, AC/DC M thermal-magnetic, medium delay, AC/DC T thermal-magnetic, long delay, AC/DC Auxiliary contacts H0 without H with auxiliary contacts in all poles H with auxiliary contacts only in pole (-pole plus) H3 with auxiliary contacts only in poles +3 (3-pole plus) H4 with auxiliary contacts only in pole (3-pole plus) H5 with auxiliary contacts only in the last pole H6 with auxiliary contacts only in poles + (3-pole plus) Auxiliary contact function 0 without make contact (N/O) 3 break contact (N/C) A pole make contact, all other poles break contacts (-pole plus) B poles + make contacts, other poles break contacts (3-pole plus) C pole break contact, other poles make contacts (-pole plus) Auxiliary contacts terminal design 0 without mm Voltage rating A AC 77 V or Current rating range A Approval logo (optional) V UL 489 (-pole) 40 - T 0 - K0 M- H - A - 0 A -V ordering example Technical data For further details please see catalogue section: Technical Information Voltage rating AC 40 V; 3 AC 45 V (50/60 Hz); UL: AC 0 V; AC 77 V; 3 AC 45 V; Current rating range A Auxiliary circuit DC 0-30 V, ma, resistive Typical life IEC AC 40/45 V,000 cycles at x I N, ind. load AC 40 V: 6,000 cycles at x I N, inductive load : 6,000 cycles at x I N, resistive load UL 489 AC 0 V: 6,000 cycles at x I N, inductive load UL 077 AC 77/480 V 3,000 cycles at x I N, inductive load AC 77 V: 6,000 cycles at x I N, inductive load : 6,000 cycles at x I N, resistive load Ambient temperature ( F, T60) Storage temperature ( F) Insulation co-ordination IEC kv / re-inforced insulation in the operating area Dielectric strength IEC operating area test voltage AC 3,000 V (reinforced insulation) pole to pole test voltage AC,500 V main circuit to auxiliary circuit test voltage AC,500 V open main circuit test voltage AC,500 V open auxiliary circuit test voltage AC 50 V Insulation resistance > 00 MΩ (DC 500 V) Interrupting capacity I nc PC AC 40 V, AC 40/45 V: 6,000 A IEC : 6,000 A Interrupting capacity UL 489 AC 0 V: 5,000 A Interrupting capacity AC 77 V, AC 77/480 V: 5,000 A UL 077 : 5,000 A Protection class operating area IP30 (IEC 6059) terminal area IP00 Vibration (sinusoidal) ± 0.38 mm (0-57 Hz), 5 g ( Hz) test to IEC , test Fc, 0 frequency cycles/axis Shock 5 g ( ms) test to IEC , test Ea Corrosion 96 hrs in 5 % salt mist, test to IEC ,test Ka Humidity 40 hrs in 95 % RH, to IEC , test Cab Housing material moulded material Mounting on symmetrical rail to EN x7.5 Mounting dimension (w x h x d).5 x 89.3 x 87. (per pole) 646

2 Thermal-Magnetic Circuit Breaker 40-T... Technical data Dimensions LINE terminal (LINE and/or DC+) M5 flexible with wire end ferrule w/wo plastic sleeve 6 mm² ( identical cables) flexible with wire end ferrule without plastic sleeve 6 mm² flexible with TWIN wire end ferrule with plastic sleeve mm² 4 mm.5 3 Nm LOAD terminal M4 flexible with wire end ferrule w/wo plastic sleeve mm ( identical cables) flexible with wire end ferrule without plastic sleeve mm² flexible with TWIN wire end ferrule with plastic sleeve mm² 0 mm..4 Nm Auxiliary contact terminals M flexible with wire end ferrule w/wo plastic sleeve mm² ( identical cables) flexible with wire end ferrule without plastic sleeve mm² 6 mm Nm Mass approx. 90 g per pole with aux. contact snap-in socket for symmetrical rail EN x7,5 label see accessories OFF ON Installation drawing operating area (reinforced insulation) mounting area (standard insulation) protection against brush contact: remove slide from the bottom of the device allowable mounting position: vertical unit I unit II unit III nx auxiliary contact terminal M max..5 mm slot for main contact terminal M4 max. 0 mm Current ratings and typical internal resistance values Current rating (A) Internal resistance (Ω) trip curve F F M T fast DC only fast medium delay long delay , , Internal connection diagrams...-h-... OFF position 0 I 3...-H3-... OFF position 0 I Si make contact (N/O) Si break contact (N/C) movable snap-in hook ON position 0 I ON position 0 I This is a metric design and millimeter dimensions take precedence ( mm ) inch 646

3 Thermal-Magnetic Circuit Breaker 40-T... Termination examples Accessories 40-T with and signal (auxiliary contacts connected in parallel) signal (parallel connection) Description Part number busbar grey, 500 mm length, X 6 0 blue, 500 mm length, red, 500 mm length, grey, 500 mm length, X X X grey X (packing unit 5 pcs) Label (packing unit 50 pcs) or from Phoenix ZBF 40-T with and jumpers (auxiliary contacts connected in parallel) protection against brush contact: remove slide from the bottom of the device jumpers (parallel connection) X busbar X 6 0 / grey, 500 mm length, r X / blue, 500 mm length, X / red, 500 mm length, r X / grey, 500 mm length, or jumper X grey label X or from Phoenix ZBF 40-T with and signal (auxiliary contacts connected in serie) jumpers (series connection shifted by in relation to the opposite side) X / blue, 500 mm length, X / red, 500 mm length, X / grey, 500 mm length, or jumper X grey push in and slide for protection against brush contact to be flush with housing sides Busbars, signal and jumpers: see accessories push up signal and jumpers against housing This is a metric design and millimeter dimensions take precedence ( mm ) inch

4 Thermal-Magnetic Circuit Breaker 40-T... Typical time/current characteristics F thermal, magnetic fast (DC) F thermal, magnetic fast (AC/DC) C 3 C , 0 0, 0,0 0,0 0, , M thermal, magnetic medium delay (AC/DC) T thermal, magnetic long delay (AC/DC) C C , 0 0, 0,0 0,0 0, , The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section Technical information. Ambient temp. F C Derating factor Magnetic tripping currents are increased by 30 % on DC supplies. When several devices are mounted together, an air gap between each is recommended. If this is not possible, each device should carry only 80 % of its rating. Approvals Authority Standard Rated voltage Current ratings VDE IEC/EN AC 40/45 V AC 40 V 0. A 3 A 0. A 3 A 0. A 3 A UL UL 077 C. No 35 AC 77/480 V AC 77 V UL UL 489 AC 0 V 0. A 3 A 0. A 3 A 0. A 3 A 0. A 3 A (single pole) 0. A 3 A (single pole) All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted

5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: E-T-A Circuit Breakers: X0050