Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks. Terminal Blocks: Single Row. EuroMag Series.
|
|
- Blake Harrison
- 5 years ago
- Views:
Transcription
1 Series A2000, LP2000 & C2000 Terminal locks A201108WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: or 3/8 (9.52mm) Wire Range: #12-22 AWG Cu Screw Size: #6-32 zinc-plated philslot LP Torque Rating: 9 lb-in. ase: Standoffs standard for easy flux washing Distance etween arriers: 0.32 (8.1mm) Recommended PC Hole Diameter: 0.6 (1.93mm) Operating Temperature: 105 C (221 F) max., -40 C (-40 F) min. Molded Material: lack, UL Rated 94V0 Thermoplastic reakdown Voltage: 3400V (A2 & LP2); 4100V (C2). Agency Information: UL File E62622, CSA File 47235; IEC ; CE Certified *30A Rating achieved with a #10 copper wire crimped to a ring terminal.; 20A Rating without ring terminal. MOUNTING ARRIER & ARRIER ENDS MOUNTING ENDS ONLY ENDS ONLY A C C Poles Mount Ctrs. Length Pole Ctrs. Length Dimensions - in (mm) A2000 & LP2000 Series 0.15 (3.8) Ø (9.53) C (16.5) (4.8) Ø 0.32 (8.1) C2000 Series C Pole Centers A Mount Centers C (9.53) arrier End arrier End arrier End 0.76 (19.3) (14.35) on LP (17.8) 0.02 (0.5) * Dimensions in inches. To convert to millimeters, multiply by (15.2) Pole Centers 0.02 (0.5) A Mount Centers arrier End 8
2 Series A2000 & LP2000 Terminal locks Part Numbering System Series Terminal Style ase/end Poles Screw Options nn A 2 nnn L P 2 qq q qq qqqq A2 - standard barrier 01* - handwired 1 - std. base/mnt. end 02 to 32 lank - std. screw LP2 - low profile 02 - printed circuit 2 - std. base/barrier end 02 to 30 on mount 00 - screws shipped bulk barrier 03 - non feed-thru 3 - insulator base/mnt. end end base 03* - stainless steel 04 - wire wrap tail 4 - insulator base/ 04 - brass nickel-plated 06 - handwired barrier end - steel SEMS - extended pin 5 - closed base/ (not available 08 - printed circuit mount end with hardware options) QC short 6 - closed base/ 09* - brass SEMS 10-7 QC molded mount end nickel-plated 14 - printed circuit (not available with QC long hardware options) CA** - captive screw Terminal Styles ase/end Note: 6 style not available with covers. 5 & 6 Styles only available with 03 terminals. WR - wire ready Options qqq (not available on LP2 Covers - (pg 26) series) A* - angle mnt. options (pg 11) A1 to A QC 1 to 9-7 QC DR* - drilled right angle (pg 11) L1 to L6 marking options (pg 25) MP* mounting plates (pg 11) RC* - retaining clips (pg 11) R30 to R77 - right angle bends (pg 11) S1* - solder lug/flat JA***, J*** & JC*** - barrier jumpers O J2*** & OJ4*** - over barrier jumpers (not available w/covers) *A2 only. **Not compatible with 03-stainless steel screws. ***Contact factory for configuration (14.0) 0.20 (5.1) 0.55 (14.0) 01 Handwired (2.79) Non Feed-Thru 04 Wire Wrap Tail (7.6) 06 Handwired 0.11 (2.79) (1.40) 0.54 (13.7) 0.14 (3.6) Extended Pin (0.81) 0.17 (4.3) QC short (6.35) 0.42 (10.7) 7 (4.75) (3.2) 0.33 (8.4) 0.31 (7.9) 0.72 (18.3) (7.62) (6.35) 10 7 QC QC long 9
3 Series A2000 & LP2000 Terminal locks Continued Screw Options (ulk ordering part numbers are in parentheses) Standard Zinc-plated Steel (F505-J) 03 Stainless Steel (F5-J) 04 rass Nickel-Plated (F506-J) Steel SEMS (F523-J) 09 rass SEMS Nickel-Plated (F524-J) WR Wire Ready Hardware Options (ulk ordering part numbers are in parentheses) Solder Lugs Jumpers Quick Connects lade Width A = lade Width = (17.3) S1 (2S1-J) 0.84 (21.2) JA (JA2-02-J) OJ2 (OJ2-J) A1 & 1 (2A1-J & 21-J) A2 & 2 (2A2-J & 22-J) A3 & 3 (2A3-J & 23-J) J (J2-02-J) OJ4 (OJ4-J) A4 & 4 (2A4-J & 24-J) A5 & 5 (2A5-J & 25-J) A6 & 6 (2A6-J & 26-J) Contact factory for configuration. JC (JC2-02-J) A7 & 7 (2A7-J & 27-J) A8 & 8 (2A8-J & 28-J) A9 & 9 (2A9-J & 29-J) ase/end Options Details 1 - Standard base/mount end 2 - Standard base/barrier end 0 (4.57) (7.62) (7.62) (5.54) Ø (3.8) mounting holes (2) 3 - Insulator base/mount end 4 - Insulator base/barrier end SECTION A A (2.4) SECTION 5 - Closed base/mount end 6 - Closed base/molded mount end 6 Molded 1, 3 & 5 10
4 Series A2000 & LP2000 Terminal locks Continued Mounting Options Right Angle ends (A2, LP2 only) Right angle terminals are offered on the A2000 & LP2000 Series. Configurations are defined in these dimensions: X = pin extension beyond the block base; Z = length from block base to centerline of the terminal tip. Standard bends consist of the X and Z dimensions shown in the chart. Specify by adding the selected end Option Code to the terminal part number. 04 Terminal end Configurations Terminal end Configurations Z 0.82 X Z 0.55 end Available Option X Z w/insulator Code (minimum) base R No R No R No R No R No R No R No R No X end Available Option X Z w/insulator Code (minimum) base R Yes R Yes R Yes R Yes R Yes R No R No R No R No R No R No Dimensions in inches. To convert to millimeters, multiply by Angle rackets (A2, LP2 only) Drilled Right Angle (A2, LP2 only) HOLE w/0.312 C' ORE Option A Angle brackets enable block to be fastened at right angles to normal mount position. ulk part number 2A-J. Mounting Plates Option DR Counterbored holes across mount ends of block enable fastening with two screws at right angles to normal mount position. Retaining Clip MOUNTING PLATE MP MT RETAINING CLIP Option MP Metal inserts with dia. hole accept #6 screw. ulk part number 2MP-J. Option RC Use on standoff tubes. Fit panels up to thick. Two clips for every five positions. Supplied unassembled. ulk part number H541-J. 11
5 Series C2000 Terminal locks Part Numbering System Series Terminal Style ase/end Poles Screws nnn C 2 nn q qq qqqq C2 - closed back 01 - handwired 1 - mount end 02 to 32 - steel SEMS 02 - printed circuit 2 - barrier end 02 to 30 on mount standard - extended pin end base 09 - brass SEMS 14 - printed circuit nickel-plated CA - captive screw CA - SEMS captive Terminal Styles **Only available on 3-poles and up. ***Contact factory for configuration.. Options qqq A** - angle mounting brackets (pg 13) A7 to A QC 7 to 9-7 QC E - exit back terminals EF - exit front terminals L1 to L6 marking options (pg 25) LT1 to LT6 marking options (pg 25) MP mtg. plates (pg 13) S1 - solder lug/flat JA***, J*** & JC*** - barrier jumpers OJ2*** & OJ4*** - over barrier jumpers Covers - (pg 26) (3.05) 01 Handwired (1.14) 0.19 (4.8 ) (17.8) Extended Pin (1.14) (3.18) 14 Screw Options (ulk ordering part numbers are in parentheses) Steel SEMS zinc-plated ( J) 09 rass SEMS nickel-plated (F524-J) * NOTE: Wire ready screws standard on all terminal styles. C2 Terminal Exit Options (6.48) X Exit Rear (std.) EF Exit Front E Exit ack 12
6 Series C2000 Terminal locks Hardware Options (ulk ordering part numbers are in parentheses) Solder Lugs Jumpers Quick Connects lade Width A = lade Width = (17.3) S1 (2S1-J) 0.84 (21.2) JA (JA2-XX-J) OJ2 (OJ2-J) A7 & 7 (2A7-J & 27-J) A8 & 8 (2A8-J & 28-J) A9 & 9 (2A9-J & 29-J) J (J2-XX-J) OJ4 (OJ4-J) JC (JC2-XX-J) Contact factory for configuration.. Mounting Options Right Angle Mounting racket End Positions usable Snap-in Angle racket A 0.79 (20.1) 0.71 (18.0) Chassis or PC #6 or #8 mounting screw & nut (Customer supplied.) 1.02 (25.8) 0.45 (11.4) Exit ack (E) Terminals Angle racket 0.24 (6.1) 0.42 (10.7) A Mounts blocks on PC boards at a right angle. Protects solder joints. Recommended for all E (Exit ack) PC terminal blocks. racket snaps securely on block (no hardware required). Minimum strip length (end positions are usable). Mount with #6-32 or #8-32 screws (not supplied). Option A Mounting Plates MP Option MP MP Metal inserts with dia. hole accept #6 screw. ulk part number 2MP-J. MOUNTING PLATE MT MT8 13
Terminal Blocks - Single Row. Series A2000, LP2000 & CB2000 Single Row Terminal Blocks
Series A2000, LP2000 & C2000 Single Row Terminal A20510807WR SPECIFICATIONS Rating: A2: 30A, 300V* LP2: 30A, 150V* C2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG CU Screw Size:
More informationA2000, LP2000 & CB2000
A2000, LP2000 & CB2000 Dimensions Inches (Millimeters) A2000 & LP2000 A203504 LP201204 Specifications Rating: A2: 30A, 300V* LP2: 30A, 150V* CB2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range:
More informationA3000, LP3000 & CB3000
A3000, LP3000 & CB3000 Dimensions Inches (Millimeters) A3000 & LP3000 A31930307 LP307102 Specifications Rating: A3: 30A, 600V* LP3: 30A, 150V* CB3: 30A, 600V* Wire Range: #12-22 AWG Cu Center Spacing:
More informationTerminal Blocks - Single Row. Series A3000, LP3000 & CB3000 Single Row Terminal Blocks
Series A3000, LP3000 & CB3000 Single Row Terminal SPECIFICATIONS Rating: A3: 30A, 600V* #12-22 AWG LP3: 30A, 150V #12-22 AWG CB3: 30A, 600V #12-22 AWG Wire Range: #12-22 AWG CU Center Spacing: 0.437 or
More informationA2, LP2 & CB2. Single Row Terminal Blocks. Dimensions Inches (Millimeters) Specifications A2 & LP2 CB2
A2, LP2 & CB2 Dimensions Inches (Millimeters) A2 & LP2 LP201204 A203504 Specifications Rating: A2: 30A, 300V* LP2: 30A, 150V* CB2: 30A, 300V* Center Spacing: 0.375 or 3/8 (9.52mm) Wire Range: #12-22 AWG
More informationA0 & CB0. Single Row Terminal Blocks. Dimensions- Inches (Millimeters) Specifications CB0
A0 & CB0 Dimensions- Inches (Millimeters) A0 0.12 (3.0) Ø A00110407 0.250 (6.35) Specifications Rating: 10 A, 300 V Center Spacing: 0.25 (6.35 mm) Wire Range: #16-30 AWG Screw Size: M3.0 nickel-plated
More informationHeavy Duty Terminal Blocks
General Information: are available in two styles Deadfront Type (1100, 1200, 985 and 0987 series) and Barrier Type (1500, 1600 and 1700 series). Ratings and Standards: The voltage ratings of terminal blocks
More informationAMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
More informationD-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
More informationProduct Certification. Approvals/Certifications. Environmental. Foam-in-place polyurethane. Plastic Mounting Plate
ulletin eneral Purpose nclosures Specifications ulletin eneral Purpose nclosures Type R,, X,, and rainproof, watertight, corrosion resistant, and dusttight, IP protection Designed for use as automation
More informationEN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
More informationGeneral Specifications
Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
More informationMULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting 10, 12 and 16 selector switch positions Switching torque up to 6 Ncm Gold plated contacts Rugged
More informationAPPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
More information8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
More informationGeneral Specifications
Series M00 Tipped Toggles Toggles Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers General Specifications Electrical Capacity
More informationAMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
More information8 Series Pushbutton Switches
8 Series Pushbutton Switches Features. Contacts Silver or gold-plated contacts.. Epoxy resin case UL94V-0 self-extinguishing epoxy. 3. Actuator style Over 30 actuator variations. 4. Insulation between
More informationHIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
More informationNEW ITEM THERMOPLASTIC A - TYPE FLANGE 3 CONTACT
NEW ITEM AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A - TYPE FLANGE 3 CONTACT Features: Thermoplastic Shell Industry standard PC footprints. Vertical or Horizontal PC mounting. Precision machined pin contacts.
More informationIP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
More informationFISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
More informationMULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting Selector switch positions up to 16 Switching torque up to 6 Ncm Gold plated contacts Rugged design
More informationRight Angle PCB Receptacle
Series 80 Series 80 Mighty Mouse ouble-start ACME Thread 80-0 Ordering Information connectors offer military grade performance in a small, lightweight package. These connectors are rated for MIL-ST-80
More informationMedium Capacity Standard Size Toggles Series S
GENERAL SPECIFICATIONS FOR S ~ S9 (Resistive & Inductive Load) Power Level: Shown in the following tables Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life:
More informationSafety switches for hinged doors
C Safety switches for hinged doors Selection diagram FR FM FX FZ FK 18 7 9 snap action overlapped CONTACT BLOCKS 21 NC 1NO+ CONDUIT ENTRIES Threaded conduit entries (standard) With cable gland assembled
More informationAMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
More informationFCC17 Series FILTERED D-SUB CONNECTORS
Specifications FCC17 Series Filter Characteristics: See Page 2 Electrical Data: See Page 2 Material and Finishes: See Page 3 Environmental Data: See Page 3 UL File # : E135615 CSA File # : LR68598 These
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationTerminals, Lugs, and Fasteners
Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying
More informationHIGH DENSITY TERMINAL BLOCKS
CONTROL LOGIC HIGH DENSITY TERMINAL BLOCKS c3controls new line of High Density terminal blocks are both innovative and user-friendly. Available in multiple terminal points from 4, 6, and 12 in a single
More informationD-Series High Reliability Circular Connectors
D-Series High Reliability Circular Connectors Technology Company, Inc. integramate D-Series Circular Connectors QA Technology integramate D-Series Connectors are high quality, plastic circular connectors
More informationJAN 16 Rev B
ANSI C136.41-2013 Rotatable Dimming Receptacles Application Specification 20 JAN 16 Rev B NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
Series 0 Mighty Mouse ouble-start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Rear Panel Jam Nut Mount Shell Style 0 Square Flange Mount Shell Style 0// In-Line Shell Style 0 How
More informationItem No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
More informationContents Rockers. A Series... B4 Process Sealed 0.4VA Logic Level Straight, Right Angle, & Vertical PC
Contents Rockers Toggles Rockers Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons A Series... 4 Process Sealed 0.4VA Logic Level Straight,
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors.00 x.00 [1.27 x 1.27] Centerline.00 x [1.27 x 2.4] Centerline AMPMODU 2mm Connectors x [2.4 x 2.4] Centerline.12 x.12 [3.18 x 3.18] Centerline.16
More informationInsulated Enclosure KU 4087, KU 4088 KU 4089 to DIN for installation in distribution cabinets or surface mounting
Insulated Enclosure KU 4087, KU 4088 KU 4089 to DIN 43 880 for installation in distribution cabinets or surface mounting Width 17,5 / 35 / 70 mm 8 / 16 / 32 plus-minus-terminal screws with self raising
More informationCROWN CLIP Series Sockets
OWN LIP Series Sockets Product Facts ompact design High performance OWN BND contacts urrents to 350 mps 1 Mates with solid or laminated blades Supports true hot-plug (current interruption)2 Float-mount
More informationMale connector; with fixing flanges; 6-pole; pin spacing 5.08 mm / 0.2 in; for screw or similar mounting types; for parallel or perpendicular mounting
Male connector; with fixing flanges; 6-pole; pin spacing 508 mm / 02 in; for screw or similar mounting types; for parallel or perpendicular mounting Item No: 231-636/019-000 Male connector; with fixing
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationAmphenol. The Company. What is a Filtered Connector? Benefits. Choosing the Right Capacitance for Your Filter Connector
Amphenol The Company Amphenol Canada Corp. a subsidiary of Amphenol Corporation, is an international leader in the manufacture of Filtered Connectors and Specialty Interconnect Devices, and has been pioneering
More informationPCB Hardware. Contents
PC Hardware Contents SMT Test Points SMT Cable Clips Coin Cell Holders SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with
More informationFCC17 Series FILTERED STACKED D-SUB CONNECTORS
FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP
More informationRound Water-resistant Connectors (M8) XS3
Round Water-resistant Connectors () XS Compact, Watertight, Round Connectors Water-resistive, compact connector meets IP67 requirements. Ideal for a wide variety of FA and OA applications. Using connectors
More informationBulletin 700-HA Tube Base Relay
Bulletin 700-HA Tube Base Relay Bulletin 700 HA Tube Base Relay 10 A contact rating DPDT, 3PDT Pin-style terminals Standard ON/OFF flag indicator Options: LED, push-to-test and manual override, socket-mounted
More informationALLEN BRADLEY RELAY Bulletin 700-HF
ALLEN BRADLEY RELAY Bulletin 700-HF Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator DEMENSIONS: Bulletin 700-HF Relay (DPDT) Bulletin 700-HF (3PDT)
More informationIntroduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
More informationT E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
More informationSafety switches with separate actuator
A Safety switches with separate actuator Selection diagram VF KEYF VF KEYF1 VF KEYF2 VF KEYF3 VF KEYF VF KEYF ACTUATORS CONTACT BLOCKS 9 snap action overlapped FD FP FL FC 21 22 33 3 3NC 2NO+1NC 1NO+ CONDUIT
More informationfischer connectors 4032 Series HIGH-PERFORMANCE IN A VERSATILE PACKAGE MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION INSTRUMENTATION Edition 1.
fischer connectors 4032 Series Plastic connectors Edition 1.2 MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION HIGH-PERFORMANCE IN A VERSATILE PACKAGE INSTRUMENTATION PERFECT PACKAGE www.fischerconnectors.com
More informationGeneral Specifications
Series SK General Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ 5V AC for low & medium security; A @ 50V AC for low security Other Ratings Contact Resistance: Insulation
More informationKey features: M8 Series BUCCANEER. Full Contact Diagrams Page 130
UCCNEER ulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory
More informationMale connector; 6-pole; pin spacing 3.5 mm / in; 100% protected against mismating
Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Item Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Marking Business data Supplier
More informationMTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
More informationM-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
More informationVMEbus systems System description Technical characteristics System description
Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................
More informationMAY 15 Rev E
Z-PACK* HS3 and HS3 Plus 6- and10-row Connectors Application Specification 114-13020 05 MAY 15 Rev E NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are
More informationINCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7
More information09. DIN Connectors
. Connectors Connectors that comply with have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary. The classic signal
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationSpecial-Purpose Proximity Sensor E2C
Special-Purpose Proximity Sensor E2C Cylindrical Inductive Sensors with Separate Amplifiers Provide Variable Detecting Capabilities Separate amplifier allows sensor to fit in space-confined sites, providing
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationTechnical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
More informationElcon CROWN EDGE Card Edge-style High Current Connectors
Elcon CROWN EDGE Card Edge-style High Current Connectors CROWN EDGE is a board-to-board power interconnect solution that uses Elcon high performance Crown contact technology configured to mate directly
More informationPCB Hardware. Contents. SMT Test Points SMT Cable Clips SMT Jumper Links PCB Jumper Links PCB Terminals, Turret Lugs Spacers / Pillars / Standoffs
PC Hardware Contents SMT Test Points SMT Cable Clips SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with standard probes,
More informationM12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector
M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45
More informationAltech s DIN Enclosures by
Altech s DIN Enclosures Since 98 Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
More informationOperating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
More informationElectrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
More informationConnector System for Fluorescent Lighting Fixtures. Connectors for In-Line Mounting of Fluorescent Lighting Fixtures. Fully Polarized Connectors
Connector System for Fluorescent Lighting Fixtures Connectors for In-Line Mounting of Fluorescent Lighting Fixtures Fully Polarized Connectors Luminaire Disconnect Connectors Pluggable Lighting Connectors
More informationModular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry
36 Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry Assembly Assembly of modular terminal blocks to terminal strips Mounting of an end plate screw fixing CAGE
More informationORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201
HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36
More information[.050 (1.27mm) Density. D-Microminiature]
Commercial [.050 (1.27mm) Density Solder Introduction Cup/Wire D-Microminiature] Cinch Commercial Products, consisting of Jones Plugs and Sockets, Barrier Blocks, Edge Cards, Two-Piece Commercial Dins,
More informationConvenience Outlets and Receptacles. Quick Guide to Snap-In Outlets and Plugs
SETION K table of contents onvenience Outlets and Receptacles Snap-In onvenience Outlets 2-Pole, 3-ire rounding.................................. K2-K7 rounding Outlet with rounding Lead...............
More informationEdgecard Design Information. Polyester thermoplastic glass reinforced, UL rated 94 V-O
Edgecard Design Information SPECIFICATIONS DAUGHTER CARD LAYOUT Installation Tooling - See end of product section pre-assembled Edgecard connectors, with C-Press contacts, combine the reliability of a
More informationRSS Series Wired Electronic Ballasts
RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz Per Circuit Combined
More informationODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic
ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently
More informationProduct Configuration Solder Tail Press-fit Tail MBCE Vertical Receptacle Yes Yes MBCE Right Angle Receptacle Yes / MBCE Straddle Mount Yes /
Application Specification 114-128016 28 FEB 17 Rev A3 NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches]. Unless otherwise
More informationJL05 SERIES CONNECTORS
The J0 Series connectors conforms to JISB0 specifications. J0 is a circular, waterproof connector using IPF structure. There is a one-touch locking mechanism for ease in mating and unmating. With first-to-make/last-to-break
More informationModular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
More informationDRAGONFLY. Positronic Industries. Interconnection Systems. High Density Signal and Power Connectors.
DRAGONFLY Interconnection Systems High Density Signal and Power Connectors Positronic Industries High Density Signal and Power Interconnection Systems Dragonfly High Density Signal/ Power Interconnection
More information09. DIN CONNECTORS
. 41 612 CONNECTORS Connectors that comply with 41 612 have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary.
More informationRSS Series Wired Electronic Ballasts
RSS Series Wired s Specifications Charts RSS Series Electronic Sign Ballasts Minimum starting temperature is -20 F (-30 C). For use with T12 HO, T8 HO, and Slimline 120 Volts, 50/60Hz No. of Lamp Circuits
More informationHigh Current Products Catalog Revised 4-01
Product Facts Pins and sockets have low insertion force High current ratings with very low resistance All plated products are gold or silver plated Louvertac bands have a temperature range from 196 C to
More informationHigh Current Products Catalog Revised onlinecomponents.com
Interfaces Product Facts Pins and sockets have low insertion force High current ratings with very low resistance All plated products are gold or silver plated Louvertac bands have a temperature range from
More informationRECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
More information10. EMC accessories. Chapter. EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips Cable clips 10.
10. EMC accessories Chapter EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips 10.11 Cable clips 10.13 More Informations about cabinet wiring with LÜTZE LSC AirSTREAM:
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
More informationSERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY. B1 Ultra Small 2A 100,000 N/A SPST, SPDT
SWITCH SELECTION GUIDE Basic Switches SERIES FEATURE MAX RATING MECHANICAL LIFE APPROVALS CIRCUITRY (Resistive) B1 Ultra Small 2A 100,000 N/A SPST, SPDT B1-5 Levers 2A 1,000,000 N/A SPST, SPDT B2 Subminiature
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationGeneral Specifications
Half-Inch Diameter Process Sealed Rotaries Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications Electrical
More information1-Conductor Female Connector with Levers Pin Spacing: mm MCS MAXI 16
-Conductor Female Connector with evers Pin Spacing: 0.6 mm MCS MAXI 6 Intuitive and tool-free lever actuation Universal connection for all conductor types Push-in termination of solid or ferruled conductors
More informationEXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
More informationAC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
More informationHan PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More informationELECTRICAL TERMINAL BLOCKS
3 ELECTRICAL TERMINAL BLOCKS SERIES/TYPE TERMINAL SPACINGS Center-To-Center Spacing (Dimensions in parentheses equal mm.) SE/SEI 1/4 (6.35) 37000/ 38000 1500/2000 CB/CFT AFTD E GFT/GB 3/8 (9.52) 3/8 &
More information16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
More information